[PATCH v6 2/7] arm64: dts: imx8mp: Add iMX8MP PCIe support

[Richard Zhu]

Add i.MX8MP PCIe support.

Signed-off-by: Richard Zhu <hongxing.zhu at nxp.com>
Tested-by: Marek Vasut <marex at denx.de>
Tested-by: Richard Leitner <richard.leitner at skidata.com>
Tested-by: Alexander Stein <alexander.stein at ew.tq-group.com>
---
 arch/arm64/boot/dts/freescale/imx8mp.dtsi | 43 +++++++++++++++++++++++
 1 file changed, 43 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index fe178b7d063c..21a4cc417c81 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -5,6 +5,7 @@
 
 #include <dt-bindings/clock/imx8mp-clock.h>
 #include <dt-bindings/power/imx8mp-power.h>
+#include <dt-bindings/reset/imx8mp-reset.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -1084,6 +1085,17 @@ media_blk_ctrl: blk-ctrl at 32ec0000 {
 				#power-domain-cells = <1>;
 			};
 
+			pcie_phy: pcie-phy at 32f00000 {
+				compatible = "fsl,imx8mp-pcie-phy";
+				reg = <0x32f00000 0x10000>;
+				resets = <&src IMX8MP_RESET_PCIEPHY>,
+					 <&src IMX8MP_RESET_PCIEPHY_PERST>;
+				reset-names = "pciephy", "perst";
+				power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_PCIE_PHY>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
 			hsio_blk_ctrl: blk-ctrl at 32f10000 {
 				compatible = "fsl,imx8mp-hsio-blk-ctrl", "syscon";
 				reg = <0x32f10000 0x24>;
@@ -1099,6 +1111,37 @@ hsio_blk_ctrl: blk-ctrl at 32f10000 {
 			};
 		};
 
+		pcie: pcie at 33800000 {
+			compatible = "fsl,imx8mp-pcie";
+			reg = <0x33800000 0x400000>, <0x1ff00000 0x80000>;
+			reg-names = "dbi", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			bus-range = <0x00 0xff>;
+			ranges =  <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000>, /* downstream I/O 64KB */
+				  <0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */
+			num-lanes = <1>;
+			num-viewport = <4>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gic GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gic GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			fsl,max-link-speed = <3>;
+			linux,pci-domain = <0>;
+			power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_PCIE>;
+			resets = <&src IMX8MP_RESET_PCIE_CTRL_APPS_EN>,
+				 <&src IMX8MP_RESET_PCIE_CTRL_APPS_TURNOFF>;
+			reset-names = "apps", "turnoff";
+			phys = <&pcie_phy>;
+			phy-names = "pcie-phy";
+			status = "disabled";
+		};
+
 		gpu3d: gpu at 38000000 {
 			compatible = "vivante,gc";
 			reg = <0x38000000 0x8000>;
-- 
2.25.1