May 2021 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...

Starting: Sat May 1 06:20:00 PDT 2021
Ending: Mon May 31 12:40:19 PDT 2021
Messages: 462

• [BUG] mtd: cfi-flash: comparison of unsigned expression in '>= 0' is always true   Ahmad Fatoum
• [BUG] mtd: cfi-flash: comparison of unsigned expression in '>= 0' is always true   Sascha Hauer
• [BUG] Out of bound read of size 1 in __d_alloc function which further leads to __default_memcpy function   Sascha Hauer
• [BUG] Out of bound read of size 1 in __d_alloc function which further leads to __default_memcpy function   Jules Maselbas
• [BUG] Out of bound read of size 1 in __d_alloc function which further leads to __default_memcpy function   Neeraj Pal
• [BUG] Out of bound read of size 1 in __d_alloc function which further leads to __default_memcpy function   Sascha Hauer
• [BUG] Out of bound read of size 1 in __d_alloc function which further leads to __default_memcpy function   Jules Maselbas
• [BUG] Stack buffer overflow WRITE of size 1 in barebox_printf function   Sascha Hauer
• [BUG] Stack buffer overflow WRITE of size 1 in nfs_start function   Sascha Hauer
• [BUG] Stack buffer overflow WRITE of size 1 in nfs_start function   Neeraj Pal
• [BUG] Stack buffer overflow WRITE of size 1 in nfs_start function   Neeraj Pal
• [BUG] Stack buffer overflow WRITE of size 1 in nfs_start function   Sascha Hauer
• [BUG] Stack buffer overflow WRITE of size 1 in nfs_start function   Neeraj Pal
• [PATCH 0/3] Fix opening empty path   Sascha Hauer
• [PATCH 0/3] rockchip: Build for multiple SoCs   Sascha Hauer
• [PATCH 0/4] Change printf behaviour   Marco Felsch
• [PATCH 0/4] Change printf behaviour   Marco Felsch
• [PATCH 0/4] x86: add EFI PCI host and iTCO watchdog support   Sascha Hauer
• [PATCH 0/5] add regmap helpers for NVMEM and i2c   Ahmad Fatoum
• [PATCH 0/6] memory: fuse overlapping memory banks   Ahmad Fatoum
• [PATCH 0/9] RISC-V: add LiteX SoC support; resurrect nmon   Antony Pavlov
• [PATCH 00/14] clk updates   Sascha Hauer
• [PATCH 00/15] Compiler warning fixes   Sascha Hauer
• [PATCH 00/16] USB: gadget: refactor to allow easier extension   Ahmad Fatoum
• [PATCH 00/16] USB: gadget: refactor to allow easier extension   Sascha Hauer
• [PATCH 00/20] RISC-V: prepare for BeagleV pre-production board support   Ahmad Fatoum
• [PATCH 01/14] clk: introduce clk init op   Sascha Hauer
• [PATCH 01/14] clk: introduce clk init op   Ahmad Fatoum
• [PATCH 01/15] arm: friendlyarm-tiny210: Remove dead code   Sascha Hauer
• [PATCH 01/16] show_progress: add system wide progress stage notifier   Ahmad Fatoum
• [PATCH 01/17] imx53: remove unused imx53_add_nand   Sascha Hauer
• [PATCH 01/20] RISC-V: socs: add Kconfig entry for StarFive JH7100   Ahmad Fatoum
• [PATCH 02/14] clk: rename clk_register() to bclk_register()   Sascha Hauer
• [PATCH 02/14] clk: rename clk_register() to bclk_register()   Ahmad Fatoum
• [PATCH 02/15] ARM: socfpga: Fix timeout tests   Sascha Hauer
• [PATCH 02/16] common: console: add log_writefile to write log into new file   Ahmad Fatoum
• [PATCH 02/17] of: platform: remove check of already added devices   Sascha Hauer
• [PATCH 02/20] net: designware: add support for IP integrated into StarFive SoC   Ahmad Fatoum
• [PATCH 03/14] clk: introduce struct clk_hw   Sascha Hauer
• [PATCH 03/14] clk: introduce struct clk_hw   Ahmad Fatoum
• [PATCH 03/14] clk: introduce struct clk_hw   Sascha Hauer
• [PATCH 03/15] i.MX FCB: Fix error checking   Sascha Hauer
• [PATCH 03/16] string: implement strstarts along with strends   Ahmad Fatoum
• [PATCH 03/17] of: platform: Keep track of populated platform devices   Sascha Hauer
• [PATCH 03/20] mfd: add TI TPS65086 PMIC restart driver   Ahmad Fatoum
• [PATCH 04/12] RISC-V: support multi-image for all machines   Sascha Hauer
• [PATCH 04/12] RISC-V: support multi-image for all machines   Ahmad Fatoum
• [PATCH 04/12] RISC-V: support multi-image for all machines   Sascha Hauer
• [PATCH 04/14] clk: introduce clk_register()   Sascha Hauer
• [PATCH 04/14] clk: introduce clk_register()   Ahmad Fatoum
• [PATCH 04/15] clk: tegra: Fix -Wtype-limits compiler warning   Sascha Hauer
• [PATCH 04/16] vsprintf: introduce %m shorthand for "%s", strerror(errno)   Ahmad Fatoum
• [PATCH 04/17] of: base: move memory init from DT to initcall   Sascha Hauer
• [PATCH 04/20] mtd: spi-nor: cadence: fix 64-bit issues   Ahmad Fatoum
• [PATCH 05/14] clk: divider: Add ro ops   Sascha Hauer
• [PATCH 05/14] clk: divider: Add ro ops   Ahmad Fatoum
• [PATCH 05/15] ARM: i.MX: xload-gpmi: Fix compiler warning   Sascha Hauer
• [PATCH 05/16] param: introduce file-list parameter type   Ahmad Fatoum
• [PATCH 05/17] of: base: move clock init from of_probe() to barebox_register_of()   Sascha Hauer
• [PATCH 05/20] nvmem: add StarFive OTP support   Ahmad Fatoum
• [PATCH 06/12] RISC-V: erizo: drop mach-erizo directory   Antony Pavlov
• [PATCH 06/12] RISC-V: erizo: drop mach-erizo directory   Ahmad Fatoum
• [PATCH 06/12] RISC-V: erizo: drop mach-erizo directory   Antony Pavlov
• [PATCH 06/14] clk: mux: Add ro ops   Sascha Hauer
• [PATCH 06/15] mtd: cfi-flash: Fix compiler warning   Sascha Hauer
• [PATCH 06/16] common: add generic system partitions interface   Ahmad Fatoum
• [PATCH 06/17] of: Set of_chosen and of_model earlier   Sascha Hauer
• [PATCH 06/20] RISC-V: dma: support multiple dma_alloc_coherent backends   Ahmad Fatoum
• [PATCH 07/14] clk: move fixed_factor to include/linux/clk.h   Sascha Hauer
• [PATCH 07/15] pci: mvebu: Fix wrong error check   Sascha Hauer
• [PATCH 07/16] fastboot: handle ill-named partitions gracefully   Ahmad Fatoum
• [PATCH 07/17] of: implement of_get_stdoutpath()   Sascha Hauer
• [PATCH 07/20] RISC-V: support incoherent I-Cache   Ahmad Fatoum
• [PATCH 07/20] RISC-V: support incoherent I-Cache   Ahmad Fatoum
• [PATCH 08/14] Add rational_best_approximation()   Sascha Hauer
• [PATCH 08/14] Add rational_best_approximation()   Ahmad Fatoum
• [PATCH 08/15] ARM: i.MX bbu-external-nand: Do not modify image   Sascha Hauer
• [PATCH 08/16] usb: gadget: dfu: change status message to info log level   Ahmad Fatoum
• [PATCH 08/17] initcall: add of_populate_initcall   Sascha Hauer
• [PATCH 08/20] soc: add support for StarFive JH7100 incoherent interconnect   Ahmad Fatoum
• [PATCH 09/12] gpio: generic: sync with upstream Linux gpio-mmio driver   Antony Pavlov
• [PATCH 09/14] clk: Update fractional divider from Linux   Sascha Hauer
• [PATCH 09/15] ARM: layerscape: Fix wrong error check   Sascha Hauer
• [PATCH 09/16] usbgadget: autostart: fix indeterminism around usbgadget.autostart   Ahmad Fatoum
• [PATCH 09/17] common: add initial barebox deep-probe support   Sascha Hauer
• [PATCH 09/20] soc: sifive: l2_cache: enable maximum available cache ways   Ahmad Fatoum
• [PATCH 1/1] zedboard: add support for usb   Michael Graichen
• [PATCH 1/1] zedboard: add support for usb   Lucas Stach
• AW: [PATCH 1/1] zedboard: add support for usb   Michael Graichen
• [PATCH 1/1] Zynq: add support to chainload another barebox   Michael Graichen
• [PATCH 1/1] Zynq: add support to chainload another barebox   Lucas Stach
• [PATCH 1/1] Zynq: add support to chainload another barebox   Ahmad Fatoum
• AW: [PATCH 1/1] Zynq: add support to chainload another barebox   Michael Graichen
• [PATCH 1/1] Zynq: add support to chainload another barebox   Michael Tretter
• AW: [PATCH 1/1] Zynq: add support to chainload another barebox   Michael Graichen
• [PATCH 1/2] firmware: refactor firmware/Makefile   Masahiro Yamada
• [PATCH 1/2] firmware: refactor firmware/Makefile   Sascha Hauer
• [PATCH 1/2] fixup! gpio: generic: sync with upstream Linux gpio-mmio driver   Ahmad Fatoum
• [PATCH 1/2] mci: arasan: wait for data available only on read   Michael Tretter
• [PATCH 1/2] mci: arasan: wait for data available only on read   Sascha Hauer
• [PATCH 1/2] uncompress: use read_full to fill decompression buffer   Lucas Stach
• [PATCH 1/3] ARM: protonic: add initial support for the Protonic PRT8MM family of boards   Lucas Stach
• [PATCH 1/3] ARM: protonic: add initial support for the Protonic PRT8MM family of boards   Sascha Hauer
• [PATCH 1/3] ARM: Remove delphi-poc20 dead leftover   Sascha Hauer
• [PATCH 1/3] ARM: rockchip: Allow to build for multiple SoCs   Sascha Hauer
• [PATCH 1/3] bootm: move ARM64 Linux image parsing to common directory   Ahmad Fatoum
• [PATCH 1/3] bootm: move ARM64 Linux image parsing to common directory   Sascha Hauer
• [PATCH 1/3] clk: imx28: Set gpmi clock to gpmi_ref   Sascha Hauer
• [PATCH 1/3] driver: add flag to check if cdev is an mci device   Marco Felsch
• [PATCH 1/3] driver: add flag to check if cdev is an mci device   Ahmad Fatoum
• [PATCH 1/3] driver: add flag to check if cdev is an mci device   Marco Felsch
• [PATCH 1/3] fixup! common: add initial barebox deep-probe support   Sascha Hauer
• [PATCH 1/3] fs: check for empty name in getname()   Sascha Hauer
• [PATCH 1/4] commands: mount: replace printf by pr_info   Marco Felsch
• [PATCH 1/4] commands: mount: replace printf by pr_info   Sascha Hauer
• [PATCH 1/4] commands: mount: replace printf by pr_info   Marco Felsch
• [PATCH 1/4] commands: mount: replace printf by pr_info   Ahmad Fatoum
• [PATCH 1/5] regmap: implement regmap_init_i2c   Ahmad Fatoum
• [PATCH 1/6] common: memory: allocate all memory devices at once   Ahmad Fatoum
• [PATCH 1/9] RISC-V: make it possible to run nmon from PBL C code   Antony Pavlov
• [PATCH 1/9] RISC-V: make it possible to run nmon from PBL C code   Ahmad Fatoum
• [PATCH 10/14] clk: Add lock to different clock types   Sascha Hauer
• [PATCH 10/15] ARM: phytec-phycard-omap3: Fix checking of unsigned variable being negative   Sascha Hauer
• [PATCH 10/16] usbgadget: allow DFU and Fastboot functions to coexist   Ahmad Fatoum
• [PATCH 10/17] pinctrl: Find controller node first   Sascha Hauer
• [PATCH 10/20] net: designware: fix 64-bit incompatibilities   Ahmad Fatoum
• [PATCH 11/12] net: macb: add SiFive support   Sascha Hauer
• [PATCH 11/14] clk: Add Linux functions to register a divider   Sascha Hauer
• [PATCH 11/15] scripts: zynq_mkimage: Make locally used function static   Sascha Hauer
• [PATCH 11/16] file_list: make freeing a NULL pointer a no-op   Ahmad Fatoum
• [PATCH 11/17] common: Explicitly probe consoles earlier with deep probe   Sascha Hauer
• [PATCH 11/20] dma: support marking SRAM for coherent DMA use   Ahmad Fatoum
• [PATCH 12/14] clk: Add Linux functions to register a fixed factor clock   Sascha Hauer
• [PATCH 12/15] ARM: module: Remove always false check   Sascha Hauer
• [PATCH 12/16] fastboot/dfu: use system partitions as fall back   Ahmad Fatoum
• [PATCH 12/17] pinctrl: Add deep probe support   Sascha Hauer
• [PATCH 12/20] mci: allocate DMA-able memory   Ahmad Fatoum
• [PATCH 13/14] clk: Add Linux functions to register a gate   Sascha Hauer
• [PATCH 13/15] aiodev: lm75: Handle unknown lm75 types   Sascha Hauer
• [PATCH 13/16] bbu: add function to directly add handlers into file_list   Ahmad Fatoum
• [PATCH 13/17] ARM: i.MX: esdctl: add deep-probe support   Sascha Hauer
• [PATCH 13/20] mci: allocate sector_buf on demand   Ahmad Fatoum
• [PATCH 14/14] clk: Add Linux functions to register a mux   Sascha Hauer
• [PATCH 14/15] clk: zynqmp: Fix wrong error check   Sascha Hauer
• [PATCH 14/16] file_list: add file_list_detect_all()   Ahmad Fatoum
• [PATCH 14/17] ARM: stm32mp: ddrctrl: add deep-probe support   Sascha Hauer
• [PATCH 14/20] dma: allocate 32-byte aligned buffers by default   Ahmad Fatoum
• [PATCH 15/15] powerpc: law: use signed type to allow error checking   Sascha Hauer
• [PATCH 15/16] common: make FILE_LIST feature unconditional   Ahmad Fatoum
• [PATCH 15/17] ARM: boards: mx6-sabrelite: add deep-probe support   Sascha Hauer
• [PATCH 15/20] mci: dw_mmc: enable use on 64-bit CPUs   Ahmad Fatoum
• [PATCH 16/16] fs: error out when writing on read-only file system   Ahmad Fatoum
• [PATCH 16/17] ARM: i.MX Phytec physom: convert to board driver   Sascha Hauer
• [PATCH 16/20] mci: dw_mmc: match against generic "snps, dw-mshc" compatible   Ahmad Fatoum
• [PATCH 17/17] ARM: i.MX Phytec physom: Add deep-probe support   Sascha Hauer
• [PATCH 17/20] clk: add initial StarFive clock support   Ahmad Fatoum
• [PATCH 17/20] clk: add initial StarFive clock support   Ahmad Fatoum
• [PATCH 18/20] reset: add StarFive reset controller driver   Ahmad Fatoum
• [PATCH 19/20] watchdog: add StarFive watchdog driver   Ahmad Fatoum
• [PATCH 2/2] bootm: add support for booting compressed images   Lucas Stach
• [PATCH 2/2] bootm: add support for booting compressed images   Sascha Hauer
• [PATCH 2/2] bootm: add support for booting compressed images   Ahmad Fatoum
• [PATCH 2/2] bootm: add support for booting compressed images   Lucas Stach
• [PATCH 2/2] bootm: add support for booting compressed images   Ahmad Fatoum
• [PATCH 2/2] bootm: add support for booting compressed images   Lucas Stach
• [PATCH 2/2] bootm: add support for booting compressed images   Ahmad Fatoum
• [PATCH 2/2] kconfig: update to Linux 5.13-rc1   Masahiro Yamada
• [PATCH 2/2] mci: arasan: configure data transfer only if we actually have data   Michael Tretter
• [PATCH 2/2] mci: arasan: configure data transfer only if we actually have data   Sascha Hauer
• [PATCH 2/2] mtd: nand_bbt: Skip bad blocks when searching for the BBT in NAND   sha at pengutronix.de
• [PATCH 2/2] RISC-V: extend multi-image to support both S- and M-Mode   Ahmad Fatoum
• [PATCH 2/2] RISC-V: extend multi-image to support both S- and M-Mode   Antony Pavlov
• [PATCH 2/2] RISC-V: extend multi-image to support both S- and M-Mode   Ahmad Fatoum
• [PATCH 2/3] ARM: i.MX: Remove mx31moboard board support   Sascha Hauer
• [PATCH 2/3] ARM: imx_v8_defconfig: enable PRT8MM board   Lucas Stach
• [PATCH 2/3] ARM: Rockchip: Merge defconfig files   Sascha Hauer
• [PATCH 2/3] ARM: Rockchip: Merge defconfig files   Ahmad Fatoum
• [PATCH 2/3] clk: imx28: propagate rate change to parents   Sascha Hauer
• [PATCH 2/3] fs: check for valid name in filename_lookup()   Sascha Hauer
• [PATCH 2/3] mci: mci-core: set the DEVFS_IS_MCI_DEV flag   Marco Felsch
• [PATCH 2/3] mci: mci-core: set the DEVFS_IS_MCI_DEV flag   Ahmad Fatoum
• [PATCH 2/3] mci: mci-core: set the DEVFS_IS_MCI_DEV flag   Marco Felsch
• [PATCH 2/3] mci: mci-core: set the DEVFS_IS_MCI_DEV flag   Ahmad Fatoum
• [PATCH 2/3] RISC-V: asm: barebox-riscv-head: use load-offset of 0   Ahmad Fatoum
• [PATCH 2/4] common: boot: replace printf by pr_info/warn variants   Marco Felsch
• [PATCH 2/5] mfd: stpmic1: simplify using regmap_init_i2c   Ahmad Fatoum
• [PATCH 2/6] memory: fuse overlapping memory banks   Ahmad Fatoum
• [PATCH 2/9] RISC-V: boards: erizo: make it possible to use nmon   Antony Pavlov
• [PATCH 2/9] RISC-V: boards: erizo: make it possible to use nmon   Ahmad Fatoum
• [PATCH 20/20] hw_random: add driver for RNG on StarFive SoC   Ahmad Fatoum
• [PATCH 3/3] ARM: i.MX: Skov-imx6: Remove custom env   Sascha Hauer
• [PATCH 3/3] ARM: imx_v8_defconfig: enable EHCI   Lucas Stach
• [PATCH 3/3] ARM: rockchip: radxa-rock: build defaultenv   Sascha Hauer
• [PATCH 3/3] fs: add linux_rootarg 'root=mmcblkXpN' support   Marco Felsch
• [PATCH 3/3] fs: add linux_rootarg 'root=mmcblkXpN' support   Ahmad Fatoum
• [PATCH 3/3] fs: add linux_rootarg 'root=mmcblkXpN' support   Marco Felsch
• [PATCH 3/3] fs: check getname() return value in open()   Sascha Hauer
• [PATCH 3/3] mtd: nand: mxs: Enable edo mode switching for i.MX28   Sascha Hauer
• [PATCH 3/3] RISC-V: add Linux kernel boot support   Ahmad Fatoum
• [PATCH 3/4] common: bootm: replace printf by pr_err/info   Marco Felsch
• [PATCH 3/5] nvmem: provider: align read/write callback prototype with upstream   Ahmad Fatoum
• [PATCH 3/6] of: propagate errors inside barebox_register_{of, fdt} into initcalls   Ahmad Fatoum
• [PATCH 3/9] serial: add litex UART driver   Antony Pavlov
• [PATCH 3/9] serial: add litex UART driver   Ahmad Fatoum
• [PATCH 4/4] common: oftree: replace printf by pr_info   Marco Felsch
• [PATCH 4/5] nvmem: add nvmem_regmap_register helper   Ahmad Fatoum
• [PATCH 4/6] of: warn about of_add_memory_bank errors   Ahmad Fatoum
• [PATCH 4/9] gpio: add driver for 74xx-ICs with MMIO access   Antony Pavlov
• [PATCH 4/9] gpio: add driver for 74xx-ICs with MMIO access   Ahmad Fatoum
• [PATCH 5/5] nvmem: stm32-bsec: simplify using new nvmem_regmap_register   Ahmad Fatoum
• [PATCH 5/6] ARM: <asm/memory.h>: propagate error codes from arm_add_mem_device()   Ahmad Fatoum
• [PATCH 5/9] spi: add litex spiflash driver   Antony Pavlov
• [PATCH 5/9] spi: add litex spiflash driver   Ahmad Fatoum
• [PATCH 5/9] spi: add litex spiflash driver   Antony Pavlov
• [PATCH 6/6] ARM: report probe error at arm_add_mem_device() callsites on failure   Ahmad Fatoum
• [PATCH 6/9] net: add LiteEth driver   Antony Pavlov
• [PATCH 6/9] net: add LiteEth driver   Roland Hieber
• [PATCH 6/9] net: add LiteEth driver   Antony Pavlov
• [PATCH 7/9] RISC-V: add initial LiteX SoC support   Antony Pavlov
• [PATCH 7/9] RISC-V: add initial LiteX SoC support   Ahmad Fatoum
• [PATCH 7/9] RISC-V: add initial LiteX SoC support   Jan Lübbe
• [PATCH 7/9] RISC-V: add initial LiteX SoC support   Antony Pavlov
• [PATCH 8/9] RISC-V: add litex-linux board support   Antony Pavlov
• [PATCH 8/9] RISC-V: add litex-linux board support   Ahmad Fatoum
• [PATCH 8/9] RISC-V: add litex-linux board support   Antony Pavlov
• [PATCH 9/9] RISC-V: add litex_linux_defconfig   Antony Pavlov
• [PATCH] arm/mvebu: sync barebox-arm-head.h to generic variant   Uwe Kleine-König
• [PATCH] ARM: at91: boot_test_cmd: Fix compiler warning   Sascha Hauer
• [PATCH] ARM: dts: imx6qdl: pfla02: Update spi-nor naming for kernel compatibility   Yunus Bas
• [PATCH] ARM: dts: imx6qdl: pfla02: Update spi-nor naming for kernel compatibility   Ahmad Fatoum
• [PATCH] ARM: dts: imx6qdl: pfla02: Update spi-nor naming for kernel compatibility   Yunus Bas
• [PATCH] ARM: dts: imx6qdl: pfla02: Update spi-nor naming for kernel compatibility   Ahmad Fatoum
• [PATCH] ARM: dts: imx6qdl: pfla02: Update spi-nor naming for kernel compatibility   Yunus Bas
• [PATCH] ARM: i.MX: demote reset reason print to debug level   Sascha Hauer
• [PATCH] ARM: i.MX: nitrogen6x: delete wrong memory node from dts   Sascha Hauer
• [PATCH] arm: imx: Replace license and copyright boilerplate by SPDX identifiers   Uwe Kleine-König
• [PATCH] arm: imx: Replace license and copyright boilerplate by SPDX identifiers   Sascha Hauer
• [PATCH] ARM: SoCFPGA: add Terasic DE10-Nano board support   Gwenhael Goavec-Merou
• [PATCH] ARM: SoCFPGA: add Terasic DE10-Nano board support   Antony Pavlov
• [PATCH] ARM: SoCFPGA: add Terasic DE10-Nano board support   Sascha Hauer
• [PATCH] ARM: SoCFPGA: add Terasic DE10-Nano board support   Ahmad Fatoum
• [PATCH] ARM: SoCFPGA: add Terasic DE10-Nano board support   Sascha Hauer
• [PATCH] ARM: SoCFPGA: add Terasic DE10-Nano board support   Roland Hieber
• [PATCH] ARM: SoCFPGA: add Terasic DE10-Nano board support   Gwenhael Goavec-Merou
• [PATCH] ARM: use new vendor prefix for MNT Reform2   Lucas Stach
• [PATCH] ARM: use new vendor prefix for MNT Reform2   Sascha Hauer
• [PATCH] ARM: webasto-ccbv2: Add variant with 512MB RAM   Holger Assmann
• [PATCH] ARM: webasto-ccbv2: Add variant with 512MB RAM   Rouven Czerwinski
• [PATCH] ARM: webasto-ccbv2: Add variant with 512MB RAM   Ahmad Fatoum
• [PATCH] commands: of_dump: implement -p for printing properties only   Ahmad Fatoum
• [PATCH] commands: of_dump: implement -p for printing properties only   Sascha Hauer
• [PATCH] common: console_common: Replace vsprintf with vsnprintf   Sascha Hauer
• [PATCH] common: console_common: Replace vsprintf with vsnprintf   Jules Maselbas
• [PATCH] Documentation: kvx: Fix broken link   Sascha Hauer
• [PATCH] Documentation: Update env sources documentation   Trent Piepho
• [PATCH] Documentation: Update env sources documentation   Sascha Hauer
• [PATCH] driver: have dev_set_name() return 0 on success   Ahmad Fatoum
• [PATCH] driver: have dev_set_name() return 0 on success   Sascha Hauer
• [PATCH] drivers: base: Check all compatible strings for modalias match   Trent Piepho
• [PATCH] fixup! fastboot/dfu: use system partitions as fall back   Ahmad Fatoum
• [PATCH] fixup! RISC-V: erizo: drop mach-erizo directory   Ahmad Fatoum
• [PATCH] fixup! RISC-V: erizo: drop mach-erizo directory   Sascha Hauer
• [PATCH] fs: Fix link_path_walk to return -ENOENT on empty path   Sascha Hauer
• [PATCH] fs: nfs: Decrease NFS timeout   Uwe Kleine-König
• [PATCH] fs: nfs: Decrease NFS timeout   Sascha Hauer
• [PATCH] fs: nfs: Fix readlink max size check   Sascha Hauer
• [PATCH] i2c: designware: fix error message formatting   Ahmad Fatoum
• [PATCH] i2c: designware: fix error message formatting   Sascha Hauer
• [PATCH] imx-image: Fix uninitialized add_barebox_header   Trent Piepho
• [PATCH] imx-image: Fix uninitialized add_barebox_header   Sascha Hauer
• [PATCH] imx-image: Fix uninitialized add_barebox_header   Trent Piepho
• [PATCH] imx-image: Fix uninitialized add_barebox_header   Sascha Hauer
• [PATCH] kconfig: update to Linux 5.13-rc1   Masahiro Yamada
• [PATCH] kconfig: update to Linux 5.13-rc1   Sascha Hauer
• [PATCH] kconfig: update to Linux 5.13-rc1   Sascha Hauer
• [PATCH] kconfig: update to Linux 5.13-rc1   Masahiro Yamada
• [PATCH] mci: atmel-sdhci: FIx compiler warning   Sascha Hauer
• [PATCH] MIPS: qemu-malta: use generic syscon reset driver   Sascha Hauer
• [PATCH] mtd: nand: Add help text for i.MX NAND controllers   Trent Piepho
• [PATCH] mtd: nand: Add help text for i.MX NAND controllers   Sascha Hauer
• [PATCH] mtd: nand: Add help text for i.MX NAND controllers   Trent Piepho
• [PATCH] mtd: spi-nor: Add support for gd25q16   Michael Olbrich
• [PATCH] mtd: spi-nor: Add support for gd25q16   Ahmad Fatoum
• [PATCH] mtd: spi-nor: Add support for gd25q16   Sascha Hauer
• [PATCH] net: dns: user corrent nameserver var name in error message   Antony Pavlov
• [PATCH] net: phy: micrel: Add led-mode support   Trent Piepho
• [PATCH] of: base: constify some property pointers   Trent Piepho
• [PATCH] of: base: constify some property pointers   Sascha Hauer
• [PATCH] readline_simple: Fix compiler warning   Sascha Hauer
• [PATCH] readline_simple: Fix compiler warning   Michael Olbrich
• [PATCH] readline_simple: Fix compiler warning   Sascha Hauer
• [PATCH] readline_simple: Fix compiler warning   Jules Maselbas
• [PATCH] README: advertise lore.barebox.org instead of mail-archive.com   Roland Hieber
• [PATCH] README: advertise lore.barebox.org instead of mail-archive.com   Sascha Hauer
• [PATCH] Removed Unreachable code: net/net.c: net_handle_arp()   Neeraj Pal
• [PATCH] Removed Unreachable code: net/net.c: net_handle_arp()   Sascha Hauer
• [PATCH] Revert "ARM: dts: phycore-imx6: change mtd-partition names for compatibility with kernel"   Yunus Bas
• [PATCH] scripts/spdxcheck.py: Use Python 3   Sascha Hauer
• [PATCH] startup: introduce global.endianness variable   Sascha Hauer
• [PATCH] startup: introduce global.endianness variable   Antony Pavlov
• [PATCH] startup: introduce global.endianness variable   Sascha Hauer
• [PATCH] usb: dwc2: do no print error message with dwc2_warn() macro   Enrico Jorns
• [PATCH] usb: dwc2: do no print error message with dwc2_warn() macro   Sascha Hauer
• [PATCH] usb: dwc2: more precise and helpful message for dr_mode config issues   Enrico Jorns
• [PATCH] usb: dwc2: more precise and helpful message for dr_mode config issues   Ahmad Fatoum
• [PATCH] usb: dwc2: more precise and helpful message for dr_mode config issues   Sascha Hauer
• [PATCH] video: reunite fb devices with their hardware parent   Ahmad Fatoum
• [PATCH] video: reunite fb devices with their hardware parent   Sascha Hauer
• [PATCH] video: reunite fb devices with their hardware parent   Ahmad Fatoum
• [PATCH] video: reunite fb devices with their hardware parent   Sascha Hauer
• [PATCH] video: reunite fb devices with their hardware parent   Ahmad Fatoum
• [PATCH] watchdog: add option to provide fall-back restart handler   Ahmad Fatoum
• [PATCH] watchdog: add option to provide fall-back restart handler   Sascha Hauer
• [PATCH] watchdog: add option to provide fall-back restart handler   Ahmad Fatoum
• [PATCH] watchdog: imxwd: get and enable clock   Sascha Hauer
• [PATCH master 1/2] sandbox: watchdog: don't return positive values from set_timeout   Sascha Hauer
• [PATCH master] usb: dwc2: increase timeout for waiting on host mode   Sascha Hauer
• [PATCH RESEND] fixup! gpio: generic: sync with upstream Linux gpio-mmio driver   Ahmad Fatoum
• [PATCH RESEND] fixup! gpio: generic: sync with upstream Linux gpio-mmio driver   Sascha Hauer
• [PATCH v1 1/6] mci: atmel_mci: add PBL support   Sascha Hauer
• [PATCH v1] ARM: protonic: vicut1: disable on-die termination to fix PHY bootstrapping   Oleksij Rempel
• [PATCH v1] ARM: protonic: vicut1: disable on-die termination to fix PHY bootstrapping   Sascha Hauer
• [PATCH v2 0/6] add multiimage support for sama5d3 based microchip-ksz9477-evb board   Sascha Hauer
• [PATCH v2 00/11] RISC-V: add LiteX SoC support; resurrect nmon   Antony Pavlov
• [PATCH v2 00/11] RISC-V: add LiteX SoC support; resurrect nmon   Ahmad Fatoum
• [PATCH v2 00/11] RISC-V: add LiteX SoC support; resurrect nmon   Antony Pavlov
• [PATCH v2 00/13] add barebox in-tree testing infrastructure   Ahmad Fatoum
• [PATCH v2 01/11] clocksource: timer-riscv: select CSR from device tree   Antony Pavlov
• [PATCH v2 01/11] clocksource: timer-riscv: select CSR from device tree   Ahmad Fatoum
• [PATCH v2 01/11] clocksource: timer-riscv: select CSR from device tree   Antony Pavlov
• [PATCH v2 01/11] clocksource: timer-riscv: select CSR from device tree   Ahmad Fatoum
• [PATCH v2 01/13] kbuild: add install target   Ahmad Fatoum
• [PATCH v2 02/11] RISC-V: make RISCV_SBI and RISCV_M_MODE explicitly mutually exclusive   Antony Pavlov
• [PATCH v2 02/11] RISC-V: make RISCV_SBI and RISCV_M_MODE explicitly mutually exclusive   Ahmad Fatoum
• [PATCH v2 02/11] RISC-V: make RISCV_SBI and RISCV_M_MODE explicitly mutually exclusive   Antony Pavlov
• [PATCH v2 02/11] RISC-V: make RISCV_SBI and RISCV_M_MODE explicitly mutually exclusive   Ahmad Fatoum
• [PATCH v2 02/11] RISC-V: make RISCV_SBI and RISCV_M_MODE explicitly mutually exclusive   Antony Pavlov
• [PATCH v2 02/11] RISC-V: make RISCV_SBI and RISCV_M_MODE explicitly mutually exclusive   Ahmad Fatoum
• [PATCH v2 02/11] RISC-V: make RISCV_SBI and RISCV_M_MODE explicitly mutually exclusive   Antony Pavlov
• [PATCH v2 02/13] kbuild: add ARCH={i386, x86_64} as aliases for x86   Ahmad Fatoum
• [PATCH v2 03/11] RISC-V: make it possible to run nmon from PBL C code   Antony Pavlov
• [PATCH v2 03/13] kbuild: add ARCH=um alias for sandbox   Ahmad Fatoum
• [PATCH v2 04/11] RISC-V: boards: erizo: make it possible to use nmon   Antony Pavlov
• [PATCH v2 04/13] MIPS: qemu-malta: generate swapped image as part of multi-image build   Ahmad Fatoum
• [PATCH v2 05/11] serial: add litex UART driver   Antony Pavlov
• [PATCH v2 05/11] serial: add litex UART driver   Ahmad Fatoum
• [PATCH v2 05/11] serial: add litex UART driver   Antony Pavlov
• [PATCH v2 05/13] openrisc: set default KBUILD_IMAGE   Ahmad Fatoum
• [PATCH v2 06/11] gpio: add driver for 74xx-ICs with MMIO access   Antony Pavlov
• [PATCH v2 06/13] Documentation: boards: RISC-V: update TinyEMU support   Ahmad Fatoum
• [PATCH v2 07/11] spi: add litex spiflash driver   Antony Pavlov
• [PATCH v2 07/13] test: add basic barebox self-test infrastructure   Ahmad Fatoum
• [PATCH v2 08/11] net: add LiteEth driver   Antony Pavlov
• [PATCH v2 08/13] test: self: port Linux printf kselftest   Ahmad Fatoum
• [PATCH v2 09/11] RISC-V: add LiteX SoC and linux-on-litex-vexriscv support   Antony Pavlov
• [PATCH v2 09/13] test: add labgrid configs for some emulated targets   Ahmad Fatoum
• [PATCH v2 1/2] of: fix up /chosen node even when there are no bootargs   Bastian Krause
• [PATCH v2 1/2] of: fix up /chosen node even when there are no bootargs   Sascha Hauer
• [PATCH v2 1/2] scripts: imx-usb-loader: print excluded USB device message only on verbose   Sascha Hauer
• [PATCH v2 1/2] uncompress: use read_full to fill decompression buffer   Lucas Stach
• [PATCH v2 1/2] uncompress: use read_full to fill decompression buffer   Sascha Hauer
• [PATCH v2 1/3] driver: add flag to check if cdev is an mci device   Marco Felsch
• [PATCH v2 1/4] drivers: mci: imx-esdhc-common.c: Add missing dev_dbg define for pbl case   Lucas Stach
• [PATCH v2 1/4] drivers: mci: imx-esdhc-common.c: Add missing dev_dbg define for pbl case   Sascha Hauer
• [PATCH v2 1/5] RISC-V: extend multi-image to support both S- and M-Mode   Ahmad Fatoum
• [PATCH v2 10/11] RISC-V: add litex_linux_defconfig   Antony Pavlov
• [PATCH v2 10/13] test: add first sample tests   Ahmad Fatoum
• [PATCH v2 11/11] RISC-V: make it possible to build RV32I multi-image with DEBUG_LL=n   Antony Pavlov
• [PATCH v2 11/11] RISC-V: make it possible to build RV32I multi-image with DEBUG_LL=n   Ahmad Fatoum
• [PATCH v2 11/13] test: add emulate.pl, a runner for barebox on emulated targets   Ahmad Fatoum
• [PATCH v2 12/13] test: self: run selftests as part of the pytest suite   Ahmad Fatoum
• [PATCH v2 13/13] test: add bthread test   Ahmad Fatoum
• [PATCH v2 2/2] bootm: add support for booting compressed images   Lucas Stach
• [PATCH v2 2/2] bootm: add support for booting compressed images   Ahmad Fatoum
• [PATCH v2 2/2] of: introduce global.linux.bootargs_append   Bastian Krause
• [PATCH v2 2/3] mci: mci-core: set the DEVFS_IS_MCI_MAIN_PART_DEV flag   Marco Felsch
• [PATCH v2 2/4] ARM: protonic: add initial support for the Protonic PRT8MM family of boards   Lucas Stach
• [PATCH v2 2/5] RISC-V: cpuinfo: return some output for non-SBI systems as well   Ahmad Fatoum
• [PATCH v2 2/6] ARM: at91: xload-mmc: add sama5d3_atmci_start_image() helper   Sascha Hauer
• [PATCH v2 3/3] fs: add linux_rootarg 'root=mmcblkXpN' support   Marco Felsch
• [PATCH v2 3/3] fs: add linux_rootarg 'root=mmcblkXpN' support   Roland Hieber
• [PATCH v2 3/3] fs: add linux_rootarg 'root=mmcblkXpN' support   Marco Felsch
• [PATCH v2 3/4] ARM: imx_v8_defconfig: enable PRT8MM board   Lucas Stach
• [PATCH v2 3/5] clocksource: RISC-V: demote probe success messages to debug level   Ahmad Fatoum
• [PATCH v2 3/5] kvx: Implement dma handling primitives   Ahmad Fatoum
• [PATCH v2 3/5] kvx: Implement dma handling primitives   Jules Maselbas
• [PATCH v2 4/4] ARM: imx_v8_defconfig: enable EHCI   Lucas Stach
• [PATCH v2 4/5] RISC-V: S-Mode: propagate Hart ID   Ahmad Fatoum
• [PATCH v2 4/5] RISC-V: S-Mode: propagate Hart ID   Ahmad Fatoum
• [PATCH v2 5/5] RISC-V: erizo: make it easier to reuse ns16550 debug_ll   Ahmad Fatoum
• [PATCH v2] ARM: i.MX: sabresd: Add support for i.MX6QP board variant   Bastian Krause
• [PATCH v2] ARM: i.MX: sabresd: Add support for i.MX6QP board variant   Sascha Hauer
• [PATCH v2] ARM: i.MX: sabresd: Add support for i.MX6QP board variant   Sascha Hauer
• [PATCH v2] ARM: SoCFPGA: add Terasic DE10-Nano board support   Gwenhael Goavec-Merou
• [PATCH v2] ARM: SoCFPGA: add Terasic DE10-Nano board support   Sascha Hauer
• [PATCH v2] ARM: webasto-ccbv2: Add variant with 512MB RAM   Holger Assmann
• [PATCH v2] ARM: webasto-ccbv2: Add variant with 512MB RAM   Rouven Czerwinski
• [PATCH v2] ARM: webasto-ccbv2: Add variant with 512MB RAM   Holger Assmann
• [PATCH v2] mtd: nand: Add help text for i.MX NAND controllers   Trent Piepho
• [PATCH v2] mtd: nand: Add help text for i.MX NAND controllers   Sascha Hauer
• [PATCH v2] net: dns: use correct nameserver var name in error message   Antony Pavlov
• [PATCH v2] net: dns: use correct nameserver var name in error message   Sascha Hauer
• [PATCH v2] net: macb: add SiFive support   Ahmad Fatoum
• [PATCH v2] net: macb: add SiFive support   Sascha Hauer
• [PATCH v2] Revert "ARM: dts: phycore-imx6: change mtd-partition names for compatibility with kernel"   Yunus Bas
• [PATCH v2] Revert "ARM: dts: phycore-imx6: change mtd-partition names for compatibility with kernel"   Sascha Hauer
• [PATCH v2] startup: introduce global.endianness variable   Antony Pavlov
• [PATCH v2] startup: introduce global.endianness variable   Sascha Hauer
• [PATCH v2] usb: i.MX: warn if vbus regulator isn't available   Uwe Kleine-König
• [PATCH v2] usb: i.MX: warn if vbus regulator isn't available   Sascha Hauer
• [PATCH v2] usb: storage: retry for up to 10s on lengthy HDD spin up   Sascha Hauer
• [PATCH v3 0/4] usbgadget: add support for USB mass storage gadget   Ahmad Fatoum
• [PATCH v3 00/10] RISC-V: add LiteX SoC support; resurrect nmon   Antony Pavlov
• [PATCH v3 01/10] clocksource: timer-riscv: select CSR from device tree   Antony Pavlov
• [PATCH v3 01/10] clocksource: timer-riscv: select CSR from device tree   Ahmad Fatoum
• [PATCH v3 02/10] RISC-V: make it possible to run nmon from PBL C code   Antony Pavlov
• [PATCH v3 03/10] RISC-V: boards: erizo: make it possible to use nmon   Antony Pavlov
• [PATCH v3 04/10] serial: add litex UART driver   Antony Pavlov
• [PATCH v3 05/10] litex serial: add setbrg callback   Antony Pavlov
• [PATCH v3 05/10] litex serial: add setbrg callback   Antony Pavlov
• [PATCH v3 05/10] litex serial: add setbrg callback   Ahmad Fatoum
• [PATCH v3 06/10] gpio: add driver for 74xx-ICs with MMIO access   Antony Pavlov
• [PATCH v3 07/10] spi: add litex spiflash driver   Antony Pavlov
• [PATCH v3 08/10] net: add LiteEth driver   Antony Pavlov
• [PATCH v3 09/10] RISC-V: add LiteX SoC and linux-on-litex-vexriscv support   Antony Pavlov
• [PATCH v3 09/10] RISC-V: add LiteX SoC and linux-on-litex-vexriscv support   Jan Lübbe
• [PATCH v3 09/10] RISC-V: add LiteX SoC and linux-on-litex-vexriscv support   Antony Pavlov
• [PATCH v3 1/3] driver: add flag to check if cdev is an mci device   Marco Felsch
• [PATCH v3 1/3] driver: add flag to check if cdev is an mci device   Sascha Hauer
• [PATCH v3 1/4] bthread: implement basic Linux-like completion API   Ahmad Fatoum
• [PATCH v3 10/10] RISC-V: add litex_linux_defconfig   Antony Pavlov
• [PATCH v3 2/3] mci: mci-core: set the DEVFS_IS_MCI_MAIN_PART_DEV flag   Marco Felsch
• [PATCH v3 2/4] slice: reschedule bthreads doing File I/O in command context   Ahmad Fatoum
• [PATCH v3 3/3] fs: add linux_rootarg 'root=mmcblkXpN' support   Marco Felsch
• [PATCH v3 3/4] usbgadget: refactor usbgadget_register to accept array   Ahmad Fatoum
• [PATCH v3 4/4] usbgadget: add support for USB mass storage gadget   Ahmad Fatoum
• [PATCH v3] ARM: i.MX: sabresd: Add support for i.MX6QP board variant   Sascha Hauer
• [PATCH v3] ARM: i.MX: sabresd: Add support for i.MX6QP board variant   Ahmad Fatoum
• [PATCH v3] ARM: i.MX: sabresd: Add support for i.MX6QP board variant   Sascha Hauer
• [PATCH v3] ARM: SoCFPGA: add Terasic DE10-Nano board support   Gwenhael Goavec-Merou
• [PATCH v3] ARM: webasto-ccbv2: Add variant with 512MB RAM   Holger Assmann
• [PATCH v3] ARM: webasto-ccbv2: Add variant with 512MB RAM   Ahmad Fatoum
• [PATCH v3] ARM: webasto-ccbv2: Add variant with 512MB RAM   Ahmad Fatoum
• [PATCH v3] ARM: webasto-ccbv2: Add variant with 512MB RAM   Sascha Hauer
• [PATCH v3] Documentation: boards: sandbox: some extra steps requires for DHCP network configuration for sandbox on the host OS   Neeraj Pal
• [PATCH v4] ARM: webasto-ccbv2: Add variant with 512MB RAM   Holger Assmann
• [PATCH v4] ARM: webasto-ccbv2: Add variant with 512MB RAM   Sascha Hauer
• [PATCH v5 00/17] barebox deep probe support   Sascha Hauer
• A new type industrial PC: Raspberry pi 4b + industrial touch monitor   donnie at sihovision.com
• Are there any operations may influence WFI instruction?   jameszxj
• Are there any operations may influence WFI instruction?   Ahmad Fatoum
• bareboxenv-target   Ahmad Fatoum
• barebox ubifs support   Barbier, Renaud
• barebox ubifs support   Sascha Hauer
• Board specific environments and broken configs   Trent Piepho
• Board specific environments and broken configs   Sascha Hauer
• Board specific environments and broken configs   Trent Piepho
• Board specific environments and broken configs   Sascha Hauer
• configuring state framework for x86/EFI   Laszlo Sitzer
• configuring state framework for x86/EFI   Ahmad Fatoum
• imx6 nand: dbbt version/layout   Sascha Hauer
• v2021.05.0   Sascha Hauer

Last message date: Mon May 31 12:40:19 PDT 2021
Archived on: Mon May 31 12:41:40 PDT 2021

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...