[PATCH v3] ARM: i.MX: sabresd: Add support for i.MX6QP board variant

[Sascha Hauer]

On Wed, May 26, 2021 at 09:22:41AM +0200, Ahmad Fatoum wrote:
> 
> 
> On 26.05.21 08:42, Sascha Hauer wrote:
> > The SabreSD comes with different SoC variants. This patch adds support
> > for the i.MX6QP based board. the DCD data has been taken from U-Boot
> > 2021.04
> > 
> > Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
> > Link: https://lore.barebox.org/20210415140313.29161-1-s.hauer@pengutronix.de
> > Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
> > ---
> > 
> > Changes since v2:
> > - Fix board compatible checks to also match "fsl,imx6qp-sabresd"
> > 
> >  arch/arm/boards/freescale-mx6-sabresd/board.c |  6 +-
> >  ...mxcfg => flash-header-mx6q-sabresd.imxcfg} |  0
> >  .../flash-header-mx6qp-sabresd.imxcfg         | 96 +++++++++++++++++++
> >  .../boards/freescale-mx6-sabresd/lowlevel.c   | 16 ++++
> >  arch/arm/dts/Makefile                         |  2 +-
> >  arch/arm/dts/imx6qp-sabresd.dts               | 42 ++++++++
> >  images/Makefile.imx                           |  4 +-
> >  7 files changed, 162 insertions(+), 4 deletions(-)
> >  rename arch/arm/boards/freescale-mx6-sabresd/{flash-header-mx6-sabresd.imxcfg => flash-header-mx6q-sabresd.imxcfg} (100%)
> >  create mode 100644 arch/arm/boards/freescale-mx6-sabresd/flash-header-mx6qp-sabresd.imxcfg
> >  create mode 100644 arch/arm/dts/imx6qp-sabresd.dts
> > 
> > diff --git a/arch/arm/boards/freescale-mx6-sabresd/board.c b/arch/arm/boards/freescale-mx6-sabresd/board.c
> > index b710c05a47..4df6663775 100644
> > --- a/arch/arm/boards/freescale-mx6-sabresd/board.c
> > +++ b/arch/arm/boards/freescale-mx6-sabresd/board.c
> > @@ -55,7 +55,8 @@ static int ar8031_phy_fixup(struct phy_device *dev)
> >  
> >  static int sabresd_devices_init(void)
> >  {
> > -	if (!of_machine_is_compatible("fsl,imx6q-sabresd"))
> > +	if (!of_machine_is_compatible("fsl,imx6q-sabresd") &&
> > +	    !of_machine_is_compatible("fsl,imx6q-sabresd"))
> 
> That's the same compatible string twice.

Yeah, just realized that as well when I tried to close the editor window and was
asked to save or discard the changes :). Fixed.

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |