March 2014 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Mon Mar 3 02:35:49 EST 2014
Ending: Mon Mar 31 20:24:09 EDT 2014
Messages: 363

• [PATCH] ath10k: add recalc RTS/CTS protection method   Bartosz Markowski
• [PATCH V2] ath10k: add recalc RTS/CTS protection method   Marek Kwaczynski
  • [PATCH V2] ath10k: add recalc RTS/CTS protection method   Kalle Valo
• [PATCH 1/2] ath10k: add vdev-id, return code to error codes   Kalle Valo
  • [PATCH 1/2] ath10k: add vdev-id, return code to error codes   Kalle Valo
• [PATCH] ath10k: unify warning messages in mac.c   Kalle Valo
  • [PATCH] ath10k: unify warning messages in mac.c   Michal Kazior
    • [PATCH] ath10k: unify warning messages in mac.c   Kalle Valo
      • [PATCH] ath10k: unify warning messages in mac.c   Kalle Valo
      • [PATCH] ath10k: unify warning messages in mac.c   Ben Greear
      • [PATCH] ath10k: unify warning messages in mac.c   Joe Perches
      • [PATCH] ath10k: unify warning messages in mac.c   Ben Greear
      • [PATCH] ath10k: unify warning messages in mac.c   Joe Perches
  • [PATCH] ath10k: unify warning messages in mac.c   Kalle Valo
• [PATCH v3] ath10k: support msdu chaining.   greearb at candelatech.com
  • [PATCH v3] ath10k: support msdu chaining.   Kalle Valo
• [PATCH v2] ath10k: support msdu chaining.   Ben Greear
  • [PATCH v2] ath10k: support msdu chaining.   Michal Kazior
• Need to get msdu-chaining working.   Ben Greear
  • Need to get msdu-chaining working.   Michal Kazior
    • Need to get msdu-chaining working.   Ben Greear
      • Need to get msdu-chaining working.   Michal Kazior
      • Need to get msdu-chaining working.   Ben Greear
      • Need to get msdu-chaining working.   Michal Kazior
• Only Lowest Legacy Rate 6Mbps used by Adhoc Mode   Yeoh Chun-Yeow
  • Only Lowest Legacy Rate 6Mbps used by Adhoc Mode   Michal Kazior
    • Only Lowest Legacy Rate 6Mbps used by Adhoc Mode   Yeoh Chun-Yeow
      • Only Lowest Legacy Rate 6Mbps used by Adhoc Mode   Janusz Dziedzic
      • Only Lowest Legacy Rate 6Mbps used by Adhoc Mode   Yeoh Chun-Yeow
      • Only Lowest Legacy Rate 6Mbps used by Adhoc Mode   Michal Kazior
      • Only Lowest Legacy Rate 6Mbps used by Adhoc Mode   Yeoh Chun-Yeow
      • Only Lowest Legacy Rate 6Mbps used by Adhoc Mode   Michal Kazior
      • Only Lowest Legacy Rate 6Mbps used by Adhoc Mode   Yeoh Chun-Yeow
      • Only Lowest Legacy Rate 6Mbps used by Adhoc Mode   Michal Kazior
      • Only Lowest Legacy Rate 6Mbps used by Adhoc Mode   Yeoh Chun-Yeow
• [PATCH] ath10k: do not overwrite max_antenna_gain   Bartosz Markowski
• ath10k-firmware.git change   Kalle Valo
• [RFC 00/14] ath10k: Refactor rx path little bit   Janusz Dziedzic
  • [RFC 01/14] ath10k: add ath10k_htt_rx_amsdu_allowed function   Janusz Dziedzic
  • [RFC 02/14] ath10k: Fill per-ppdu info in rx_info only once   Janusz Dziedzic
  • [RFC 03/14] ath10k: move rx related functions to htt_rx.c   Janusz Dziedzic
  • [RFC 04/14] ath10k: rename process_rx_rates to ath10k_htt_rx_h_rates   Janusz Dziedzic
  • [RFC 05/14] ath10k: introduce ieee80211_rx_status to htt_rx_info   Janusz Dziedzic
    • [RFC 05/14] ath10k: introduce ieee80211_rx_status to htt_rx_info   Kalle Valo
  • [RFC 06/14] ath10k: kill signal field in htt_rx_info   Janusz Dziedzic
  • [RFC 07/14] ath10k: setup rx channel per ppdu   Janusz Dziedzic
  • [RFC 08/14] ath10k: kill rate substruct and tsf from htt_rx_info   Janusz Dziedzic
  • [RFC 09/14] ath10k: kill fcs_err from htt_rx_info   Janusz Dziedzic
  • [RFC 10/14] ath10k: kill mic_err/amsdu_more from htt_rx_info   Janusz Dziedzic
  • [RFC 11/14] ath10k: kill status from htt_rx_info   Janusz Dziedzic
  • [RFC 12/14] ath10k: kill encrypt_type from htt_rx_info   Janusz Dziedzic
  • [RFC 13/14] ath10k: return error when ath10k_htt_rx_amsdu_pop() fail   Janusz Dziedzic
    • [RFC 13/14] ath10k: return error when ath10k_htt_rx_amsdu_pop() fail   Michal Kazior
  • [RFC 14/14] ath10k: improve way we play with attention flags   Janusz Dziedzic
  • [RFC 00/14] ath10k: Refactor rx path little bit   Kalle Valo
    • [RFC 00/14] ath10k: Refactor rx path little bit   Janusz Dziedzic
• [PATCH] ath10k: allow the supported rate change by reassociate peer   Chun-Yeow Yeoh
  • [PATCH] ath10k: allow the supported rate change by reassociate peer   Kalle Valo
• [PATCH v2] ath10k: do not overwrite max_antenna_gain   Bartosz Markowski
  • [PATCH v2] ath10k: do not overwrite max_antenna_gain   Kalle Valo
• [RFC v2 13/14] ath10k: return error when ath10k_htt_rx_amsdu_pop() fail   Janusz Dziedzic
  • [RFC v2 14/14] ath10k: improve way we play with attention flags   Janusz Dziedzic
• Missing memory barriers   Kalle Valo
• Let ath10k_err take 'ar' argument?   Ben Greear
  • Let ath10k_err take 'ar' argument?   Kalle Valo
    • Let ath10k_err take 'ar' argument?   Ben Greear
• Firmware crash when sending large numbers of forwarded packets   Avery Pennarun
  • Firmware crash when sending large numbers of forwarded packets   Michal Kazior
  • Firmware crash when sending large numbers of forwarded packets   Ben Greear
    • Firmware crash when sending large numbers of forwarded packets   Avery Pennarun
      • Firmware crash when sending large numbers of forwarded packets   Ben Greear
      • Firmware crash when sending large numbers of forwarded packets   Avery Pennarun
      • Firmware crash when sending large numbers of forwarded packets   Michal Kazior
  • Firmware crash when sending large numbers of forwarded packets   Kalle Valo
    • Firmware crash when sending large numbers of forwarded packets   Avery Pennarun
      • Firmware crash when sending large numbers of forwarded packets   Kalle Valo
      • Firmware crash when sending large numbers of forwarded packets   Avery Pennarun
      • Firmware crash when sending large numbers of forwarded packets   Kalle Valo
      • Firmware crash when sending large numbers of forwarded packets   Michal Kazior
      • Firmware crash when sending large numbers of forwarded packets   Michal Kazior
• ath10k driver crashes whenever firmware crashes on ARM SoC   Kalle Valo
  • ath10k driver crashes whenever firmware crashes on ARM SoC   Avery Pennarun
    • ath10k driver crashes whenever firmware crashes on ARM SoC   Adrian Chadd
      • ath10k driver crashes whenever firmware crashes on ARM SoC   Avery Pennarun
      • ath10k driver crashes whenever firmware crashes on ARM SoC   Kalle Valo
      • ath10k driver crashes whenever firmware crashes on ARM SoC   Michal Kazior
    • ath10k driver crashes whenever firmware crashes on ARM SoC   Kalle Valo
  • ath10k driver crashes whenever firmware crashes on ARM SoC   Ben Greear
    • ath10k driver crashes whenever firmware crashes on ARM SoC   Kalle Valo
      • ath10k driver crashes whenever firmware crashes on ARM SoC   Ben Greear
      • ath10k driver crashes whenever firmware crashes on ARM SoC   Avery Pennarun
      • ath10k driver crashes whenever firmware crashes on ARM SoC   Kalle Valo
      • ath10k driver crashes whenever firmware crashes on ARM SoC   Adrian Chadd
      • ath10k driver crashes whenever firmware crashes on ARM SoC   Kalle Valo
      • ath10k driver crashes whenever firmware crashes on ARM SoC   Ben Greear
      • ath10k driver crashes whenever firmware crashes on ARM SoC   Kalle Valo
• Pull request: ath 20140311   Kalle Valo
  • Pull request: ath 20140311   John W. Linville
• [PATCH 1/2] ath10k: separate result parameter in ath10k_bmi_execute()   Kalle Valo
  • [PATCH 2/2] ath10k: check otp.bin result   Kalle Valo
    • [PATCH 2/2] ath10k: check otp.bin result   Kalle Valo
  • [PATCH 1/2] ath10k: separate result parameter in ath10k_bmi_execute()   Kalle Valo
• [PATCH v2] ath10k: add soft/hard firmware crash option to simulate_fw_crash   Kalle Valo
  • [PATCH v2] ath10k: add soft/hard firmware crash option to simulate_fw_crash   Kalle Valo
    • [PATCH v2] ath10k: add soft/hard firmware crash option to simulate_fw_crash   Marek Puzyniak
  • [PATCH v2] ath10k: add soft/hard firmware crash option to simulate_fw_crash   Kalle Valo
    • [PATCH v2] ath10k: add soft/hard firmware crash option to simulate_fw_crash   Michal Kazior
      • [PATCH v2] ath10k: add soft/hard firmware crash option to simulate_fw_crash   Jouni Malinen
      • [PATCH v2] ath10k: add soft/hard firmware crash option to simulate_fw_crash   Kalle Valo
    • [PATCH v2] ath10k: add soft/hard firmware crash option to simulate_fw_crash   Dan Carpenter
      • [PATCH v2] ath10k: add soft/hard firmware crash option to simulate_fw_crash   Kalle Valo
      • [PATCH v2] ath10k: add soft/hard firmware crash option to simulate_fw_crash   Dan Carpenter
  • [PATCH v2] ath10k: add soft/hard firmware crash option to simulate_fw_crash   Kalle Valo
• [PATCH 1/3] Rename LICENSE.atheros_firmware to LICENCE.old_qca   Kalle Valo
  • [PATCH 2/3] ath6k: remove AR6003.1 firmware   Kalle Valo
    • [PATCH 2/3] ath6k: remove AR6003.1 firmware   Ben Hutchings
  • [PATCH 3/3] ath10k: add firmware files   Kalle Valo
    • [PATCH 3/3] ath10k: add firmware files   Kalle Valo
      • [PATCH 3/3] ath10k: add firmware files   Ben Hutchings
    • [PATCH 3/3] ath10k: add firmware files   Luis R. Rodriguez
      • [PATCH 3/3] ath10k: add firmware files   Dave Taht
      • [PATCH 3/3] ath10k: add firmware files   Arend van Spriel
      • [PATCH 3/3] ath10k: add firmware files   Kalle Valo
      • [PATCH 3/3] ath10k: add firmware files   Luis R. Rodriguez
      • [PATCH 3/3] ath10k: add firmware files   Ben Hutchings
      • [PATCH 3/3] ath10k: add firmware files   Luis R. Rodriguez
• Performance of ath10k   Vu Hai NGUYEN
  • Performance of ath10k   Kalle Valo
  • Performance of ath10k   Trevor Cullen
    • Performance of ath10k   Kalle Valo
      • Performance of ath10k   Yeoh Chun-Yeow
      • Performance of ath10k   Kalle Valo
    • Performance of ath10k   Ben Greear
• [PATCH] ath10k: update regulatory domain settings for 10.x firmware   Marek Puzyniak
  • [PATCH] ath10k: update regulatory domain settings for 10.x firmware   Kalle Valo
    • [PATCH] ath10k: update regulatory domain settings for 10.x firmware   Marek Puzyniak
  • [PATCH] ath10k: update regulatory domain settings for 10.x firmware   Kalle Valo
• Proper way to do warm-reset from the driver?   Ben Greear
  • Proper way to do warm-reset from the driver?   Kalle Valo
    • Proper way to do warm-reset from the driver?   Ben Greear
• Firmware crash/lockup on WLE900VX.   Ben Greear
  • Firmware crash/lockup on WLE900VX.   Ben Greear
• [For Help]Wrong mac address when i used ath10k driver   wangdc
  • [For Help]Wrong mac address when i used ath10k driver   Yeoh Chun-Yeow
    • [For Help]Wrong mac address when i used ath10k driver   wangdc
  • [For Help]Wrong mac address when i used ath10k driver   Kalle Valo
    • [For Help]Wrong mac address when i used ath10k driver   wangdc
• Stuck packet in ath10k   Ben Greear
• [PATCH 1/2] ath10k: add ath10k_htt_rx_amsdu_allowed function   Janusz Dziedzic
  • [PATCH 2/2] ath10k: Fill per-ppdu info in rx_info only once   Janusz Dziedzic
  • [PATCH 1/2] ath10k: add ath10k_htt_rx_amsdu_allowed function   Kalle Valo
• [RFC v2 1/8] ath10k: move rx related functions to htt_rx.c   Janusz Dziedzic
  • [RFC v2 2/8] ath10k: rename process_rx_rates to ath10k_htt_rx_h_rates   Janusz Dziedzic
  • [RFC v2 3/8] ath10k: introduce ieee80211_rx_status to htt_rx_info   Janusz Dziedzic
  • [RFC v2 4/8] ath10k: kill signal field in htt_rx_info   Janusz Dziedzic
  • [RFC v2 5/8] ath10k: setup rx channel per ppdu   Janusz Dziedzic
  • [RFC v2 6/8] ath10k: kill not needed fields from htt_rx_info   Janusz Dziedzic
  • [RFC v2 7/8] ath10k: return error when ath10k_htt_rx_amsdu_pop() fail   Janusz Dziedzic
  • [RFC v2 8/8] ath10k: improve way we play with attention flags   Janusz Dziedzic
• Raw Tx Mode   Yeoh Chun-Yeow
• [RFC] ath10k: fix rssi and rate reporting   Janusz Dziedzic
  • [RFC] ath10k: fix rssi and rate reporting   Ben Greear
• Trouble connecting to broadcom AC APs?   Ben Greear
  • Trouble connecting to broadcom AC APs?   Kalle Valo
    • Trouble connecting to broadcom AC APs?   Ben Greear
      • Trouble connecting to broadcom AC APs?   Adrian Chadd
      • Trouble connecting to broadcom AC APs?   Ben Greear
      • Trouble connecting to broadcom AC APs?   Adrian Chadd
      • Trouble connecting to broadcom AC APs?   Ben Greear
      • Trouble connecting to broadcom AC APs?   Adrian Chadd
      • Trouble connecting to broadcom AC APs?   Janusz Dziedzic
      • Trouble connecting to broadcom AC APs?   Janusz Dziedzic
      • Trouble connecting to broadcom AC APs?   Ben Greear
      • Trouble connecting to broadcom AC APs?   Janusz Dziedzic
• Compilation ath10k   Vu Hai NGUYEN
  • Compilation ath10k   Kalle Valo
    • Compilation ath10k   Vu Hai NGUYEN
      • Compilation ath10k   Kalle Valo
• Failure to allocate large memory blocks upon firmware crash   Avery Pennarun
  • Failure to allocate large memory blocks upon firmware crash   Kalle Valo
  • Failure to allocate large memory blocks upon firmware crash   Kalle Valo
• Documenting firmware branches   Kalle Valo
• FW Rate Control is not working for Adhoc Mode   Yeoh Chun-Yeow
• [PATCH] ath10k: Fix getting stats from firmware.   greearb at candelatech.com
  • [PATCH] ath10k: Fix getting stats from firmware.   Michal Kazior
    • [PATCH] ath10k: Fix getting stats from firmware.   Yeoh Chun-Yeow
      • [PATCH] ath10k: Fix getting stats from firmware.   Ben Greear
      • [PATCH] ath10k: Fix getting stats from firmware.   Kalle Valo
      • [PATCH] ath10k: Fix getting stats from firmware.   Yeoh Chun-Yeow
      • [PATCH] ath10k: Fix getting stats from firmware.   Yeoh Chun-Yeow
      • [PATCH] ath10k: Fix getting stats from firmware.   Ben Greear
      • [PATCH] ath10k: Fix getting stats from firmware.   Ben Greear
    • [PATCH] ath10k: Fix getting stats from firmware.   Ben Greear
      • [PATCH] ath10k: Fix getting stats from firmware.   Kalle Valo
• [PATCH] ath10k: fix the peer mac address in getting stats   Chun-Yeow Yeoh
  • [PATCH] ath10k: fix the peer mac address in getting stats   Michal Kazior
    • [PATCH] ath10k: fix the peer mac address in getting stats   Kalle Valo
      • [PATCH] ath10k: fix the peer mac address in getting stats   Michal Kazior
  • [PATCH] ath10k: fix the peer mac address in getting stats   Kalle Valo
• [PATCH 0/8] ath10k: refactor htt_rx path   Janusz Dziedzic
  • [PATCH 1/8] ath10k: move rx related functions to htt_rx.c   Janusz Dziedzic
  • [PATCH 2/8] ath10k: rename process_rx_rates to ath10k_htt_rx_h_rates   Janusz Dziedzic
  • [PATCH 3/8] ath10k: introduce ieee80211_rx_status to htt_rx_info   Janusz Dziedzic
  • [PATCH 4/8] ath10k: setup rx channel per ppdu   Janusz Dziedzic
    • [PATCH 4/8] ath10k: setup rx channel per ppdu   Kalle Valo
      • [PATCH 4/8] ath10k: setup rx channel per ppdu   Janusz Dziedzic
  • [PATCH 5/8] ath10k: kill not needed fields from htt_rx_info   Janusz Dziedzic
  • [PATCH 6/8] ath10k: return error when ath10k_htt_rx_amsdu_pop() fail   Janusz Dziedzic
  • [PATCH 7/8] ath10k: improve way we play with attention flags   Janusz Dziedzic
    • [PATCH 7/8] ath10k: improve way we play with attention flags   Kalle Valo
  • [PATCH 8/8] ath10k: finally kill htt_rx_info   Janusz Dziedzic
    • [PATCH 8/8] ath10k: finally kill htt_rx_info   Kalle Valo
• [PATCH 1/2] ath10k: introduce rx_status htt template   Janusz Dziedzic
  • [PATCH 1/2] ath10k: introduce rx_status htt template   Kalle Valo
    • [PATCH 1/2] ath10k: introduce rx_status htt template   Janusz Dziedzic
      • [PATCH 1/2] ath10k: introduce rx_status htt template   Kalle Valo
• [PATCH 2/2] ath10k: fix rssi and rate reporting   Janusz Dziedzic
  • [PATCH 2/2] ath10k: fix rssi and rate reporting   Kalle Valo
• [PATCH] ath10k: add the Rx rate in FW stats   Chun-Yeow Yeoh
  • [PATCH] ath10k: add the Rx rate in FW stats   Michal Kazior
    • [PATCH] ath10k: add the Rx rate in FW stats   Yeoh Chun-Yeow
    • [PATCH] ath10k: add the Rx rate in FW stats   Kalle Valo
      • [PATCH] ath10k: add the Rx rate in FW stats   Ben Greear
• [PATCH] ath10k: dont call csa_finish more than once   Michal Kazior
  • [PATCH] ath10k: dont call csa_finish more than once   Johannes Berg
    • [PATCH] ath10k: dont call csa_finish more than once   Michal Kazior
      • [PATCH] ath10k: dont call csa_finish more than once   Johannes Berg
      • [PATCH] ath10k: dont call csa_finish more than once   Michal Kazior
      • [PATCH] ath10k: dont call csa_finish more than once   Johannes Berg
  • [PATCH] ath10k: dont call csa_finish more than once   Kalle Valo
• master branch rebased due to a mistake   Kalle Valo
• [PATCH v2] ath10k: Fix getting stats from firmware.   greearb at candelatech.com
  • [PATCH v2] ath10k: Fix getting stats from firmware.   Kalle Valo
• [PATCH 1/3] ath10k: Add debugging for tx-credits usage.   greearb at candelatech.com
  • [PATCH 3/3] ath10k: add otp and firmware boot error messages.   greearb at candelatech.com
    • [PATCH 3/3] ath10k: add otp and firmware boot error messages.   Kalle Valo
  • [PATCH 1/3] ath10k: Add debugging for tx-credits usage.   Kalle Valo
    • [PATCH 1/3] ath10k: Add debugging for tx-credits usage.   Michal Kazior
      • [PATCH 1/3] ath10k: Add debugging for tx-credits usage.   Ben Greear
      • [PATCH 1/3] ath10k: Add debugging for tx-credits usage.   Michal Kazior
      • [PATCH 1/3] ath10k: Add debugging for tx-credits usage.   Ben Greear
      • [PATCH 1/3] ath10k: Add debugging for tx-credits usage.   Michal Kazior
      • [PATCH 1/3] ath10k: Add debugging for tx-credits usage.   Ben Greear
      • [PATCH 1/3] ath10k: Add debugging for tx-credits usage.   Janusz Dziedzic
    • [PATCH 1/3] ath10k: Add debugging for tx-credits usage.   Ben Greear
• [PATCH 2/3] ath10k: Better firmware loading error messages.   greearb at candelatech.com
  • [PATCH 2/3] ath10k: Better firmware loading error messages.   Kalle Valo
• [PATCH v2] ath10k: add the Rx rate in FW stats   greearb at candelatech.com
  • [PATCH v2] ath10k: add the Rx rate in FW stats   Yeoh Chun-Yeow
  • [PATCH v2] ath10k: add the Rx rate in FW stats   Kalle Valo
• [PATCH] ath10k: update wal_dbg_tx_stats structure with missing parameter   Chun-Yeow Yeoh
  • [PATCH] ath10k: update wal_dbg_tx_stats structure with missing parameter   Kalle Valo
    • [PATCH] ath10k: update wal_dbg_tx_stats structure with missing parameter   Yeoh Chun-Yeow
• [PATCH v3] ath10k: unify warning messages in mac.c   Kalle Valo
  • [PATCH v3] ath10k: unify warning messages in mac.c   Kalle Valo
• Compilation backport ath10k   Vu Hai NGUYEN
  • Compilation backport ath10k   Kalle Valo
    • Compilation backport ath10k   Vu Hai NGUYEN
      • Compilation backport ath10k   Kalle Valo
• Scanning all 5Ghz channels with AC NIC.   Ben Greear
  • Scanning all 5Ghz channels with AC NIC.   Janusz Dziedzic
    • Scanning all 5Ghz channels with AC NIC.   Ben Greear
      • Scanning all 5Ghz channels with AC NIC.   Ben Greear
      • Scanning all 5Ghz channels with AC NIC.   Janusz Dziedzic
  • Scanning all 5Ghz channels with AC NIC.   Jouni Malinen
    • Scanning all 5Ghz channels with AC NIC.   Ben Greear
• [PATCH 1/4 v2] ath10k: add debugging for tx-credits usage   greearb at candelatech.com
  • [PATCH 2/4 v2] ath10k: better firmware loading error messages   greearb at candelatech.com
    • [PATCH 2/4 v2] ath10k: better firmware loading error messages   Kalle Valo
  • [PATCH 3/4 v2] ath10k: add otp and firmware boot error messages   greearb at candelatech.com
  • [PATCH 4/4 v2] ath10k: invalid msdu-id logging   greearb at candelatech.com
    • [PATCH 4/4 v2] ath10k: invalid msdu-id logging   Kalle Valo
      • [PATCH 4/4 v2] ath10k: invalid msdu-id logging   Ben Greear
  • [PATCH 1/4 v2] ath10k: add debugging for tx-credits usage   Kalle Valo
• [PATCH v2 1/8] ath10k: move rx related functions to htt_rx.c   Janusz Dziedzic
  • [PATCH v2 2/8] ath10k: rename process_rx_rates to ath10k_htt_rx_h_rates   Janusz Dziedzic
  • [PATCH v2 3/8] ath10k: introduce ieee80211_rx_status to htt_rx_info   Janusz Dziedzic
  • [PATCH v2 4/8] ath10k: setup rx channel per ppdu   Janusz Dziedzic
  • [PATCH v2 5/8] ath10k: kill not needed fields from htt_rx_info   Janusz Dziedzic
  • [PATCH v2 6/8] ath10k: return error when ath10k_htt_rx_amsdu_pop() fail   Janusz Dziedzic
  • [PATCH v2 7/8] ath10k: improve way we play with attention flags   Janusz Dziedzic
  • [PATCH v2 8/8] ath10k: finally kill htt_rx_info   Janusz Dziedzic
  • [PATCH v2 1/8] ath10k: move rx related functions to htt_rx.c   Kalle Valo
• [PATCH v2 1/2] ath10k: introduce rx_status htt template   Janusz Dziedzic
  • [PATCH v2 2/2] ath10k: fix rssi and rate reporting   Janusz Dziedzic
    • [PATCH v2 2/2] ath10k: fix rssi and rate reporting   Ben Greear
  • [PATCH v2 1/2] ath10k: introduce rx_status htt template   Kalle Valo
• How to get tx rate in ath10k?   Ben Greear
  • How to get tx rate in ath10k?   Kalle Valo
    • How to get tx rate in ath10k?   Ben Greear
• [PATCH] ath10k: fix printing of peer stats in non-AP firmware   Chun-Yeow Yeoh
  • [PATCH] ath10k: fix printing of peer stats in non-AP firmware   Michal Kazior
    • [PATCH] ath10k: fix printing of peer stats in non-AP firmware   Yeoh Chun-Yeow
      • [PATCH] ath10k: fix printing of peer stats in non-AP firmware   Michal Kazior
      • [PATCH] ath10k: fix printing of peer stats in non-AP firmware   Yeoh Chun-Yeow
      • [PATCH] ath10k: fix printing of peer stats in non-AP firmware   Michal Kazior
      • [PATCH] ath10k: fix printing of peer stats in non-AP firmware   Yeoh Chun-Yeow
      • [PATCH] ath10k: fix printing of peer stats in non-AP firmware   Michal Kazior
      • [PATCH] ath10k: fix printing of peer stats in non-AP firmware   Yeoh Chun-Yeow
    • [PATCH] ath10k: fix printing of peer stats in non-AP firmware   Ben Greear
  • [PATCH] ath10k: fix printing of peer stats in non-AP firmware   Kalle Valo
• [PATCH 0/8] ath10k: small cleanups to pci.c   Kalle Valo
  • [PATCH 1/8] ath10k: cleanup ath10k_pci_wait_for_target_init()   Kalle Valo
    • [PATCH 1/8] ath10k: cleanup ath10k_pci_wait_for_target_init()   Michal Kazior
      • [PATCH 1/8] ath10k: cleanup ath10k_pci_wait_for_target_init()   Kalle Valo
      • [PATCH 1/8] ath10k: cleanup ath10k_pci_wait_for_target_init()   Michal Kazior
      • [PATCH 1/8] ath10k: cleanup ath10k_pci_wait_for_target_init()   Kalle Valo
  • [PATCH 2/8] ath10k: add module parameter to disable cold reset   Kalle Valo
  • [PATCH 3/8] ath10k: fix name of target_ps module parameter   Kalle Valo
  • [PATCH 4/8] ath10k: advertise only firmware API 2 files   Kalle Valo
  • [PATCH 5/8] ath10k: delete ar_pci->fw_indicator_address   Kalle Valo
  • [PATCH 6/8] ath10k: improve pci debug messages   Kalle Valo
  • [PATCH 7/8] ath10k: add module parameter values to the pci info print   Kalle Valo
  • [PATCH 8/8] ath10k: print chip id during boot   Kalle Valo
• [PATCH] ath10k: add extra pdev stats on 10.1 firmware   Chun-Yeow Yeoh
  • [PATCH] ath10k: add extra pdev stats on 10.1 firmware   Kalle Valo
• [PATCH 0/2] ath10k: ce fixes   Michal Kazior
  • [PATCH v2 0/3] ath10k: ce fixes   Michal Kazior
    • [PATCH v2 1/3] ath10k: convert pci_alloc_consistent() to dma_alloc_coherent()   Michal Kazior
    • [PATCH v2 2/3] ath10k: split ce initialization and allocation   Michal Kazior
    • [PATCH v2 3/3] ath10k: deinit copy engine before resetting   Michal Kazior
    • [PATCH v2 0/3] ath10k: ce fixes   Kalle Valo
• [PATCH 1/2] ath10k: convert pci_alloc_consistent() to dma_alloc_coherent()   Michal Kazior
• [PATCH 2/2] ath10k: split ce initialization and allocation   Michal Kazior
  • [PATCH 2/2] ath10k: split ce initialization and allocation   Kalle Valo
    • [PATCH 2/2] ath10k: split ce initialization and allocation   Michal Kazior
      • [PATCH 2/2] ath10k: split ce initialization and allocation   Kalle Valo
      • [PATCH 2/2] ath10k: split ce initialization and allocation   Michal Kazior
• [PATCH v2 0/8] ath10k: small cleanups to pci.c   Kalle Valo
  • [PATCH v2 1/8] ath10k: cleanup ath10k_pci_wait_for_target_init()   Kalle Valo
  • [PATCH v2 2/8] ath10k: add module parameter to disable cold reset   Kalle Valo
  • [PATCH v2 3/8] ath10k: fix name of target_ps module parameter   Kalle Valo
  • [PATCH v2 4/8] ath10k: advertise only firmware API 2 files   Kalle Valo
  • [PATCH v2 5/8] ath10k: delete ar_pci->fw_indicator_address   Kalle Valo
  • [PATCH v2 6/8] ath10k: improve pci debug messages   Kalle Valo
  • [PATCH v2 7/8] ath10k: add module parameter values to the pci info print   Kalle Valo
  • [PATCH v2 8/8] ath10k: print chip id during boot   Kalle Valo
  • [PATCH v2 0/8] ath10k: small cleanups to pci.c   Kalle Valo
• [PATCH] ath10k: cleanup debug messages in ath10k_wmi_event_host_swba()   Kalle Valo
• [PATCH] ath10k: update wal_dbg_tx_stats structure with missing parameter.   Kalle Valo
  • [PATCH] ath10k: update wal_dbg_tx_stats structure with missing parameter.   Kalle Valo
• [PATCH v5] ath10k: implement per-VDEV FW statistics   Kalle Valo
  • [PATCH v5] ath10k: implement per-VDEV FW statistics   Michal Kazior
    • [PATCH v5] ath10k: implement per-VDEV FW statistics   Kalle Valo
      • [PATCH v5] ath10k: implement per-VDEV FW statistics   Yeoh Chun-Yeow
      • [PATCH v5] ath10k: implement per-VDEV FW statistics   Kalle Valo
      • [PATCH v5] ath10k: implement per-VDEV FW statistics   Yeoh Chun-Yeow
      • [PATCH v5] ath10k: implement per-VDEV FW statistics   Kalle Valo
  • [PATCH v5] ath10k: implement per-VDEV FW statistics   Yeoh Chun-Yeow
• Running throughput tests   Bart Jooris
  • Running throughput tests   Kalle Valo
    • Running throughput tests   Bart Jooris
      • Running throughput tests   Ben Greear
      • Running throughput tests   Bart Jooris
      • Running throughput tests   Ben Greear
      • Running throughput tests   Bart Jooris
• Compiling custom ath10k: step 5 minor issue   Bart Jooris
  • Compiling custom ath10k: step 5 minor issue   Dave Taht
• Here are some ath10k performance graphs.   Ben Greear
  • Here are some ath10k performance graphs.   Ben Greear
• Clean-ish rebase on top of 3.14.0 (final)?   Ben Greear
• ath10k: ieee80211_restart_work called with hardware scan in progress   Ben Greear
• More on ath10k_flush.   Ben Greear

Last message date: Mon Mar 31 20:24:09 EDT 2014
Archived on: Mon Mar 31 20:24:35 EDT 2014

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...