July 2016 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Fri Jul 1 00:14:27 PDT 2016
Ending: Sun Jul 31 14:43:40 PDT 2016
Messages: 472

• [LEDE-DEV] a Procd alternative to respawn for a died daemon?   Jurgen Van Ham
  • [LEDE-DEV] a Procd alternative to respawn for a died daemon?   John Crispin
• [LEDE-DEV] Add Synopsys brand to Wiki   Alexey Brodkin
  • [LEDE-DEV] Add Synopsys brand to Wiki   Alexey Brodkin
• [LEDE-DEV] Procd instance pidfiles remain after daemon dies unexpectedly   John Crispin
  • [LEDE-DEV] Procd instance pidfiles remain after daemon dies unexpectedly   Jurgen Van Ham
• [LEDE-DEV] [BUG] cns3xxx: ath9k crash caught on boot   Koen Vandeputte
• [LEDE-DEV] [PATCH 0/4] kernel: mac80211: extend gpio_chip initialization   Felix Fietkau
• [LEDE-DEV] [PATCH] netifd: remove wireless device when device fails to setup   Eduardo Abinader
  • [LEDE-DEV] [PATCH] netifd: remove wireless device when device fails to setup   Felix Fietkau
    • [LEDE-DEV] [PATCH] netifd: remove wireless device when device fails to setup   Eduardo Abinader
      • [LEDE-DEV] [PATCH] netifd: remove wireless device when device fails to setup   Felix Fietkau
• [LEDE-DEV] [PATCH web] docs: add page with basic rpcd info   Rafał Miłecki
• [LEDE-DEV] [PATCH v2 0/4] kernel: mac80211: extend gpio_chip initialization   Martin Blumenstingl
  • [LEDE-DEV] [PATCH v2 1/4] mac80211: refresh patches   Martin Blumenstingl
  • [LEDE-DEV] [PATCH v2 2/4] kernel: mac80211: fold the AR9280 GPIO patch into the ath9k GPIO patch   Martin Blumenstingl
  • [LEDE-DEV] [PATCH v2 3/4] kernel: mac80211: enable the gpio controller for all ath9k devices   Martin Blumenstingl
  • [LEDE-DEV] [PATCH v2 4/4] kernel: mac80211: set the parent of the ath9k gpio_chip   Martin Blumenstingl
• [LEDE-DEV] [PATCH 2/2] prism54-firmware: add also other p54 firmware to own package   Christian Lamparter
• [LEDE-DEV] [PATCH ubus] cmake: Fix find_library for ubusd and examples/server   Florian Fainelli
  • [LEDE-DEV] [PATCH ubus] cmake: Fix find_library for ubusd and examples/server   John Crispin
• [LEDE-DEV] [PATCH uclient] cmake: Find libubox/ustream-ssl.h header file   Florian Fainelli
• [LEDE-DEV] [PATCH usign] cmake: Find libubox/utils.h header file   Florian Fainelli
• [LEDE-DEV] [PATCH ustream-ssl] cmake: Find libubox/ustream.h header file   Florian Fainelli
• [LEDE-DEV] [PATCH] cmake: Find uci header file   Florian Fainelli
  • [LEDE-DEV] [PATCH] cmake: Find uci header file   Florian Fainelli
• [LEDE-DEV] [PATCH procd] cmake: Find libubox/uloop.h   Florian Fainelli
• [LEDE-DEV] [PATCH jsonpath] cmake: Find libubox/list.h header file   Florian Fainelli
• [LEDE-DEV] [PATCH fstools 1/2] cmake: Find libubox/ulog.h   Florian Fainelli
• [LEDE-DEV] [PATCH fstools 2/2] cmake: Link against libjson-c   Florian Fainelli
• [LEDE-DEV] [PATCH odhcpd] cmake: Find libubox/uloop.h   Florian Fainelli
• [LEDE-DEV] odhcp repo access   John Crispin
• [LEDE-DEV] [PATCH web] docs: fix rpcd page header syntax   Rafał Miłecki
• [LEDE-DEV] Kernel symbol dependencies and KCONFIG usage for kernel packages   Baptiste Jonglez
  • [LEDE-DEV] Kernel symbol dependencies and KCONFIG usage for kernel packages   John Crispin
  • [LEDE-DEV] Kernel symbol dependencies and KCONFIG usage for kernel packages   John Crispin
  • [LEDE-DEV] Kernel symbol dependencies and KCONFIG usage for kernel packages   Hauke Mehrtens
    • [LEDE-DEV] Kernel symbol dependencies and KCONFIG usage for kernel packages   Baptiste Jonglez
      • [LEDE-DEV] kmod-udptunnel{4, 6} packages are empty (Was: Kernel symbol dependencies and KCONFIG usage for kernel packages)   Baptiste Jonglez
      • [LEDE-DEV] kmod-udptunnel{4, 6} packages are empty (Was: Kernel symbol dependencies and KCONFIG usage for kernel packages)   Hauke Mehrtens
      • [LEDE-DEV] kmod-udptunnel{4, 6} packages are empty (Was: Kernel symbol dependencies and KCONFIG usage for kernel packages)   Baptiste Jonglez
• [LEDE-DEV] [PATCH 1/5] uci-defaults: add MAC address option to atm bridge   Mathias Kresin
  • [LEDE-DEV] [PATCH 2/5] br2684ctl: set the MAC address configured for the atm bridge using   Mathias Kresin
    • [LEDE-DEV] [PATCH 2/5] br2684ctl: set the MAC address configured for the atm bridge using   Felix Fietkau
      • [LEDE-DEV] [PATCH 2/5] br2684ctl: set the MAC address configured for the atm bridge using   Mathias Kresin
  • [LEDE-DEV] [PATCH 3/5] lantiq: pass MAC address to the ATM bridge helper   Mathias Kresin
    • [LEDE-DEV] [PATCH 3/5] lantiq: pass MAC address to the ATM bridge helper   John Crispin
      • [LEDE-DEV] [PATCH 3/5] lantiq: pass MAC address to the ATM bridge helper   Mathias Kresin
  • [LEDE-DEV] [PATCH 4/5] lantiq: ltq-xdsl-app: remove ESI settings   Mathias Kresin
  • [LEDE-DEV] [PATCH 5/5] lantiq: DGN3500: use the MAC address from uboot env   Mathias Kresin
  • [LEDE-DEV] [PATCH 1/5] uci-defaults: add MAC address option to atm bridge   Kevin Darbyshire-Bryant
• [LEDE-DEV] procd: patch to support busybox mkfs.ext2   Luke McKee
  • [LEDE-DEV] procd: patch to support busybox mkfs.ext2   Arjen de Korte
  • [LEDE-DEV] procd: patch to support busybox mkfs.ext2   Luke McKee
    • [LEDE-DEV] procd: patch to support busybox mkfs.ext2   Luke McKee
• [LEDE-DEV] Lede r881 - how to get better Wireless performace ?   Dennis Schneck
  • [LEDE-DEV] Lede r881 - how to get better Wireless performace ?   David Lang
• [LEDE-DEV] procd: patch v3 to support busybox mkfs.ext2   John Crispin
  • [LEDE-DEV] [PATCH V3] Re: procd: patch to support busybox mkfs.ext2   Luke McKee
• [LEDE-DEV] [RFD] Future - suggestion for the teleconference   Luke McKee
• [LEDE-DEV] Mayor fix for Engenius ESR1750   reiner otto
• [LEDE-DEV] adding luci to snapshot images   Daniel Curran-Dickinson
  • [LEDE-DEV] adding luci to snapshot images   Rafał Miłecki
• [LEDE-DEV] Routing two interfaces on same subnet   Baptiste Clenet
  • [LEDE-DEV] Routing two interfaces on same subnet   Baptiste Jonglez
  • [LEDE-DEV] Routing two interfaces on same subnet   Wang Linetkux
    • [LEDE-DEV] Routing two interfaces on same subnet   Baptiste Clenet
      • [LEDE-DEV] Routing two interfaces on same subnet   Baptiste Jonglez
      • [LEDE-DEV] Routing two interfaces on same subnet   Ben Greear
      • [LEDE-DEV] Routing two interfaces on same subnet   Baptiste Clenet
      • [LEDE-DEV] Routing two interfaces on same subnet   Ben Greear
      • [LEDE-DEV] Routing two interfaces on same subnet   Baptiste Clenet
  • [LEDE-DEV] Routing two interfaces on same subnet   Tobias Welz
    • [LEDE-DEV] Routing two interfaces on same subnet   Baptiste Clenet
      • [LEDE-DEV] Routing two interfaces on same subnet   Tobias Welz
      • [LEDE-DEV] Routing two interfaces on same subnet   Baptiste Clenet
      • [LEDE-DEV] Routing two interfaces on same subnet   Aaron Z
      • [LEDE-DEV] Routing two interfaces on same subnet   Tobias Welz
      • [LEDE-DEV] Routing two interfaces on same subnet   Baptiste Clenet
      • [LEDE-DEV] Routing two interfaces on same subnet   Tobias Welz
      • [LEDE-DEV] Routing two interfaces on same subnet   Baptiste Clenet
      • [LEDE-DEV] Routing two interfaces on same subnet   Baptiste Clenet
      • [LEDE-DEV] Routing two interfaces on same subnet   Tobias Welz
      • [LEDE-DEV] Routing two interfaces on same subnet   Baptiste Clenet
      • [LEDE-DEV] Routing two interfaces on same subnet   David Lang
      • [LEDE-DEV] Routing two interfaces on same subnet   Baptiste Clenet
      • [LEDE-DEV] Routing two interfaces on same subnet   Tobias Welz
• [LEDE-DEV] [PATCH procd] system: fix localtime value in ubus info method output   Rafał Miłecki
  • [LEDE-DEV] [PATCH procd] system: fix localtime value in ubus info method output   John Crispin
    • [LEDE-DEV] [PATCH procd] system: fix localtime value in ubus info method output   Rafał Miłecki
  • [LEDE-DEV] [PATCH V2 procd] system: fix localtime value in ubus info method output   Rafał Miłecki
• [LEDE-DEV] [PATCH] base-files: sysupgrade. Added the ability to use URL as source   adron at yapic.net
  • [LEDE-DEV] [PATCH] base-files: sysupgrade. Added the ability to use URL as source   Felix Fietkau
  • [LEDE-DEV] [PATCH] base-files: sysupgrade. Added the ability to use URL as source   adron at yapic.net
  • [LEDE-DEV] [PATCH] base-files: sysupgrade. Added the ability to use URL as source   adron at yapic.net
    • [LEDE-DEV] [PATCH] base-files: sysupgrade. Added the ability to use URL as source   Bastian Bittorf
  • [LEDE-DEV] [PATCH] base-files: sysupgrade. Added the ability to use URL as source   adron at yapic.net
    • [LEDE-DEV] [PATCH] base-files: sysupgrade. Added the ability to use URL as source   Bastian Bittorf
  • [LEDE-DEV] [PATCH] base-files: sysupgrade. Added the ability to use URL as source   adron at yapic.net
  • [LEDE-DEV] [PATCH] base-files: sysupgrade. Added the ability to use URL as source   adron at yapic.net
  • [LEDE-DEV] [PATCH] base-files: sysupgrade. Added the ability to use URL as source   adron at yapic.net
    • [LEDE-DEV] [PATCH] base-files: sysupgrade. Added the ability to use URL as source   John Crispin
• [LEDE-DEV] netifd , route config behavior inconsistent with Wiki   Felix Fietkau
  • [LEDE-DEV] netifd , route config behavior inconsistent with Wiki   Thierry Du Tre
• [LEDE-DEV] Mirror Hosting Offer   Chris Blake
  • [LEDE-DEV] Mirror Hosting Offer   Etienne Champetier
    • [LEDE-DEV] Mirror Hosting Offer   Chris Blake
  • [LEDE-DEV] Mirror Hosting Offer   Jo-Philipp Wich
• [LEDE-DEV] [PATCH] Mountd: Add sysupgrade functionality.   Philipp Deppenwiese
  • [LEDE-DEV] [PATCH] Mountd: Add sysupgrade functionality.   John Crispin
    • [LEDE-DEV] [PATCH] Mountd: Add sysupgrade functionality.   Bruno Randolf
      • [LEDE-DEV] [PATCH] Mountd: Add sysupgrade functionality.   Wang Linetkux
      • [LEDE-DEV] [PATCH] Mountd: Add sysupgrade functionality.   Olivier Hardouin
      • [LEDE-DEV] [PATCH] Mountd: Add sysupgrade functionality.   Zaolin
      • [LEDE-DEV] [PATCH] Mountd: Add sysupgrade functionality.   Olivier Hardouin
• [LEDE-DEV] [PATCH] base-files: sysupgrade. Added the ability   Luke McKee
• [LEDE-DEV] Setting packages in Image building config   Adrian Panella
• [LEDE-DEV] [BUG] package/devel/valgrind: cannot build for sunxi   Heinrich Schuchardt
  • [LEDE-DEV] [BUG] package/devel/valgrind: cannot build for sunxi   Heinrich Schuchardt
  • [LEDE-DEV] [BUG] package/devel/valgrind: cannot build for sunxi   Felix Fietkau
• [LEDE-DEV] [PATCH] remove pidfile when daemon dies and is not respawned   Jurgen Van Ham
• [LEDE-DEV] fstools testing help   John Crispin
  • [LEDE-DEV] fstools testing help   Josua Mayer
    • [LEDE-DEV] fstools testing help   Álvaro Fernández Rojas
      • [LEDE-DEV] fstools testing help   Josua Mayer
      • [LEDE-DEV] fstools testing help   Álvaro Fernández Rojas
      • [LEDE-DEV] fstools testing help   Josua Mayer
      • [LEDE-DEV] fstools testing help   John Crispin
      • [LEDE-DEV] fstools testing help   Josua Mayer
• [LEDE-DEV] [PATCH] procd: remove pidfile after unexpected termination without respawn   Jurgen Van Ham
• [LEDE-DEV] [PATCH] linux/archs38: Disable USB 2.0   Alexey Brodkin
• [LEDE-DEV] [PATCH] usb: Remove annoying warning about bogus URB   Alexey Brodkin
• [LEDE-DEV] [PATCH procd] system: add reboot method to system ubus object   Rafał Miłecki
  • [LEDE-DEV] [PATCH procd] system: add reboot method to system ubus object   John Crispin
  • [LEDE-DEV] [PATCH V2 procd] system: add reboot method to system ubus object   Rafał Miłecki
• [LEDE-DEV] [PATCH] lantiq: mac address setting on BTHOMEHUBV3A   Ben Mulvihill
• [LEDE-DEV] Bikeshedding vs patch assessment   Daniel Curran-Dickinson
• [LEDE-DEV] Clarification on recursive dependencies   Daniel Curran-Dickinson
  • [LEDE-DEV] Clarification on recursive dependencies   Felix Fietkau
• [LEDE-DEV] LEDE and locale issues   Daniel Curran-Dickinson
• [LEDE-DEV] Avoiding useless debugging and testing via URFC or RFD   Daniel Curran-Dickinson
• [LEDE-DEV] git.lede-project.org currently down   Jo-Philipp Wich
  • [LEDE-DEV] git.lede-project.org currently down   Jo-Philipp Wich
• [LEDE-DEV] [PATCH, v2] ramips: Add support for the NixCore X1 Module   L. D. Pinney
• [LEDE-DEV] [PATCH] linux/archs38: Add wireless AP capabilities similarly to axs101   Alexey Brodkin
• [LEDE-DEV] [PATCH 0/2] kernel: arc: Better fix for modules loading   Alexey Brodkin
  • [LEDE-DEV] [PATCH 1/2] Revert "linux: arc: disable kernel unwinding to fix modules loading"   Alexey Brodkin
  • [LEDE-DEV] [PATCH 2/2] kernel: Add upstream fix for module loading   Alexey Brodkin
    • [LEDE-DEV] [PATCH 2/2] kernel: Add upstream fix for module loading   Rafał Miłecki
  • [LEDE-DEV] [PATCH 1/2] Revert "linux: arc: disable kernel unwinding to fix modules loading"   Alexey Brodkin
• [LEDE-DEV] [PATCH mt76] tx: remove spurious semicolon   Daniel Golle
• [LEDE-DEV] LEDE & IPv6   Craig Miller
  • [LEDE-DEV] LEDE & IPv6   Baptiste Jonglez
    • [LEDE-DEV] LEDE & IPv6   Baptiste Jonglez
• [LEDE-DEV] [PATCH 0/2 v2] kernel: arc: Better fix for modules loading   Alexey Brodkin
  • [LEDE-DEV] [PATCH 1/2 v2] Revert "linux: arc: disable kernel unwinding to fix modules loading"   Alexey Brodkin
  • [LEDE-DEV] [PATCH 2/2 v2] kernel: Add upstream fix for module loading   Alexey Brodkin
• [LEDE-DEV] [RFC 1/2] ar71xx: image: fix making loader kernel for seama   Yousong Zhou
  • [LEDE-DEV] [RFC 2/2] ar71xx: image: fix typo in MTDPARTS def for qihoo-c301   Yousong Zhou
• [LEDE-DEV] Target Profile removed from image name?   Donald Chisholm
  • [LEDE-DEV] Target Profile removed from image name?   Baptiste Jonglez
    • [LEDE-DEV] Target Profile removed from image name?   Donald Chisholm
      • [LEDE-DEV] Target Profile removed from image name?   Baptiste Jonglez
      • [LEDE-DEV] Target Profile removed from image name?   Donald Chisholm
• [LEDE-DEV] [PATCH v2] Support Candela-Tech ath10k out-of-tree driver.   greearb at candelatech.com
• [LEDE-DEV] [PATCH v3] Support Candela-Tech ath10k out-of-tree driver.   greearb at candelatech.com
• [LEDE-DEV] [RFC v2 1/2] ar71xx: image: fix making loader kernel for seama   Yousong Zhou
  • [LEDE-DEV] [RFC v2 2/2] ar71xx: image: fix typo in MTDPARTS def for qihoo-c301   Yousong Zhou
    • [LEDE-DEV] [RFC v2 2/2] ar71xx: image: fix typo in MTDPARTS def for qihoo-c301   Steven Haigh
  • [LEDE-DEV] [RFC v2 1/2] ar71xx: image: fix making loader kernel for seama   Steven Haigh
    • [LEDE-DEV] [RFC v2 1/2] ar71xx: image: fix making loader kernel for seama   Yousong Zhou
      • [LEDE-DEV] [RFC v2 1/2] ar71xx: image: fix making loader kernel for seama   Steven Haigh
• [LEDE-DEV] DHCP via bridge in case of IPv4   Alexey Brodkin
  • [LEDE-DEV] DHCP via bridge in case of IPv4   Aaron Z
    • [LEDE-DEV] DHCP via bridge in case of IPv4   Alexey Brodkin
      • [LEDE-DEV] DHCP via bridge in case of IPv4   Russell Senior
      • [LEDE-DEV] DHCP via bridge in case of IPv4   Alexey Brodkin
• [LEDE-DEV] [RFC v3 0/3] ar71xx: image: fix making seama images   Yousong Zhou
  • [LEDE-DEV] [RFC v3 1/3] ar71xx: image: seama: fix making factory and sysupgrade image   Yousong Zhou
  • [LEDE-DEV] [RFC v3 2/3] ar71xx: image: fix typo in MTDPARTS def for qihoo-c301   Yousong Zhou
  • [LEDE-DEV] [RFC v3 3/3] ar71xx: base-files: remove the now unneeded 09_fix-seama-header   Yousong Zhou
    • [LEDE-DEV] [RFC v3 3/3] ar71xx: base-files: remove the now unneeded 09_fix-seama-header   Steven Haigh
  • [LEDE-DEV] [RFC v3 0/3] ar71xx: image: fix making seama images   Steven Haigh
• [LEDE-DEV] opkg update Collected errors   easyzonecorp.net
• [LEDE-DEV] [RFC v4 0/4] ar71xx: image: fix making seama images   Yousong Zhou
  • [LEDE-DEV] [RFC v4 1/4] tools: padjffs2: add option to output padding data to stdout   Yousong Zhou
  • [LEDE-DEV] [RFC v4 2/4] ar71xx: image: seama: fix making factory and sysupgrade image   Yousong Zhou
  • [LEDE-DEV] [RFC v4 3/4] ar71xx: image: fix typo in MTDPARTS def for qihoo-c301   Yousong Zhou
  • [LEDE-DEV] [RFC v4 4/4] ar71xx: base-files: remove the now unneeded 09_fix-seama-header   Yousong Zhou
    • [LEDE-DEV] [RFC v4 4/4] ar71xx: base-files: remove the now unneeded 09_fix-seama-header   Jo-Philipp Wich
  • [LEDE-DEV] [RFC v4 0/4] ar71xx: image: fix making seama images   Steven Haigh
    • [LEDE-DEV] [RFC v4 0/4] ar71xx: image: fix making seama images   Yousong Zhou
    • [LEDE-DEV] [RFC v4 0/4] ar71xx: image: fix making seama images   Steven Haigh
• [LEDE-DEV] [PATCH] dropbear: Add IPPort parameter   Laurent GUERBY
• [LEDE-DEV] [PATCH] dropbear: Fix append_port in IPv6 case   Laurent GUERBY
• [LEDE-DEV] [PATCH] dropbear: Fix append_port in IPv6 case (v2)   Laurent GUERBY
  • [LEDE-DEV] [PATCH] dropbear: Fix append_port in IPv6 case (v2)   John Crispin
    • [LEDE-DEV] [PATCH] dropbear: Fix append_port in IPv6 case (v2)   Laurent GUERBY
• [LEDE-DEV] Building infrastructure (Was: trying to cover costs on my bit of the build cluster)   Baptiste Jonglez
• [LEDE-DEV] [RFC] Use CONFIG_USE_STRIP=y as default   Heinrich Schuchardt
  • [LEDE-DEV] [RFC] Use CONFIG_USE_STRIP=y as default   Heinrich Schuchardt
    • [LEDE-DEV] [RFC] Use CONFIG_USE_STRIP=y as default   Felix Fietkau
• [LEDE-DEV] [PATCH] [mksh] Update to r52c   Alive 4ever
  • [LEDE-DEV] [PATCH] [mksh] Update to r52c   John Crispin
• [LEDE-DEV] restore or compile config backup from openwrt   Jochen Demmer
• [LEDE-DEV] [PATCH firewall3] cmake: Find uci.h   Florian Fainelli
• [LEDE-DEV] [PATCH uhttpd] cmake: Find libubox/usock.h   Florian Fainelli
• [LEDE-DEV] [PATCH] cmake: Find libubus.h   Florian Fainelli
• [LEDE-DEV] [PATCH iwinfo] Makefile: explictly link with all shared libraries   Florian Fainelli
• [LEDE-DEV] [PATCH mountd] cmake: Find uci.h   Florian Fainelli
• [LEDE-DEV] [PATCH usbmode 1/2] cmake: Find libubox/blobmsg_json.h   Florian Fainelli
  • [LEDE-DEV] [PATCH usbmode 2/2] cmake: Search for libjson-c   Florian Fainelli
• [LEDE-DEV] [PATCH] utils/mksh: Update to r52c   Alive 4ever
• [LEDE-DEV] Sync data from tmpfs to internal or external flash periodically !   Valent Turkovic
• [LEDE-DEV] wpad regression?   jg log
• [LEDE-DEV] Getting started with LEDE?   Rich Brown
  • [LEDE-DEV] Getting started with LEDE?   Yousong Zhou
    • [LEDE-DEV] Update - Re: Getting started with LEDE?   Rich Brown
• [LEDE-DEV] getver.sh regression   John Crispin
  • [LEDE-DEV] getver.sh regression   Jonas Gorski
    • [LEDE-DEV] getver.sh regression   John Crispin
      • [LEDE-DEV] getver.sh regression   Jonas Gorski
  • [LEDE-DEV] getver.sh regression   Álvaro Fernández Rojas
    • [LEDE-DEV] getver.sh regression   Jonas Gorski
      • [LEDE-DEV] getver.sh regression   Álvaro Fernández Rojas
      • [LEDE-DEV] getver.sh regression   Jonas Gorski
      • [LEDE-DEV] getver.sh regression   Álvaro Fernández Rojas
• [LEDE-DEV] trying to cover costs on my bit of the build cluster   Dave Taht
• [LEDE-DEV] [PATCH 0/3] toolchain: update gcc and musl   Hauke Mehrtens
  • [LEDE-DEV] [PATCH 2/3] musl: update musl to version 1.1.15   Hauke Mehrtens
    • [LEDE-DEV] [PATCH 2/3] musl: update musl to version 1.1.15   Hauke Mehrtens
  • [LEDE-DEV] [PATCH 3/3] musl: remove sh3 workaround   Hauke Mehrtens
• [LEDE-DEV] [PATCH 1/3] gcc: update gcc to version 5.4.0   Hauke Mehrtens
• [LEDE-DEV] [RFC 1/8] tools/isl: bump to 0.17.1   Syrone Wong
  • [LEDE-DEV] [RFC 2/8] toolchain/binutils: add 2.26.1   Syrone Wong
    • [LEDE-DEV] [RFC 2/8] toolchain/binutils: add 2.26.1   Felix Fietkau
  • [LEDE-DEV] [RFC 3/8] toolchain/musl: update to 1.1.15   Syrone Wong
  • [LEDE-DEV] [RFC 4/8] toolchain/gdb: add 7.11.1   Syrone Wong
    • [LEDE-DEV] [RFC 4/8] toolchain/gdb: add 7.11.1   Felix Fietkau
  • [LEDE-DEV] [RFC 5/8] toolchain/gcc: add 6.1.0   Syrone Wong
    • [LEDE-DEV] [RFC 5/8] toolchain/gcc: add 6.1.0   Felix Fietkau
      • [LEDE-DEV] [RFC 5/8] toolchain/gcc: add 6.1.0   Syrone Wong
      • [LEDE-DEV] [RFC 5/8] toolchain/gcc: add 6.1.0   Felix Fietkau
      • [LEDE-DEV] [RFC 5/8] toolchain/gcc: add 6.1.0   Syrone Wong
  • [LEDE-DEV] [RFC 6/8] uclibc++: fix gcc 6 build   Syrone Wong
    • [LEDE-DEV] [RFC 6/8] uclibc++: fix gcc 6 build   Felix Fietkau
  • [LEDE-DEV] [RFC 7/8] config: add gcc 6 info to build rule   Syrone Wong
    • [LEDE-DEV] [RFC 7/8] config: add gcc 6 info to build rule   Felix Fietkau
  • [LEDE-DEV] [RFC 8/8] toolchain: choose new toolchain only if   Syrone Wong
    • [LEDE-DEV] [RFC 8/8] toolchain: choose new toolchain only if   Felix Fietkau
• [LEDE-DEV] [PATCH][ubox] kmodloader: fix lsmod depends output   Hauke Mehrtens
• [LEDE-DEV] [PATCH v4] Support Candela-Tech ath10k out-of-tree driver.   greearb at candelatech.com
• [LEDE-DEV] [PATCH v2 0/8] apm821xx: apm821xx platform   Christian Lamparter
  • [LEDE-DEV] [PATCH v2 1/8] apm821xx: add support for the apm821xx device target   Christian Lamparter
    • [LEDE-DEV] [PATCH v2 1/8] apm821xx: add support for the apm821xx device target   Felix Fietkau
      • [LEDE-DEV] [PATCH v2 1/8] apm821xx: add support for the apm821xx device target   Christian Lamparter
  • [LEDE-DEV] [PATCH v2 2/8] apm821xx: add support for the Cisco Meraki MR24   Christian Lamparter
    • [LEDE-DEV] [PATCH v2 2/8] apm821xx: add support for the Cisco Meraki MR24   Felix Fietkau
      • [LEDE-DEV] [PATCH v2 2/8] apm821xx: add support for the Cisco Meraki MR24   Christian Lamparter
      • [LEDE-DEV] [PATCH v2 2/8] apm821xx: add support for the Cisco Meraki MR24   Felix Fietkau
      • [LEDE-DEV] [PATCH v2 2/8] apm821xx: add support for the Cisco Meraki MR24   Christian Lamparter
      • [LEDE-DEV] [PATCH v2 2/8] apm821xx: add support for the Cisco Meraki MR24   Felix Fietkau
  • [LEDE-DEV] [PATCH v2 3/8] apm821xx: dw_dmac: backport fixes and cleanups from 4.7   Christian Lamparter
  • [LEDE-DEV] [PATCH v2 4/8] apm821xx: sata_dwc_460ex: backport fixes and cleanups from 4.7   Christian Lamparter
  • [LEDE-DEV] [PATCH v2 5/8] apm821xx: add support for the Western Digital MyBook Live Series   Christian Lamparter
  • [LEDE-DEV] [PATCH v2 6/8] apm821xx: tc654: add driver for Microchip TC654/TC655 PWM fan controllers   Christian Lamparter
  • [LEDE-DEV] [PATCH v2 7/8] apm821xx: lm90 add thermal sensor interface support for device tree   Christian Lamparter
  • [LEDE-DEV] [PATCH v2 8/8] apm821xx: add support for the Netgear Centria N900 WNDR4700/WNDR4720   Christian Lamparter
    • [LEDE-DEV] [PATCH v2 8/8] apm821xx: add support for the Netgear Centria N900 WNDR4700/WNDR4720   Felix Fietkau
      • [LEDE-DEV] [PATCH v2 8/8] apm821xx: add support for the Netgear Centria N900 WNDR4700/WNDR4720   Christian Lamparter
    • [LEDE-DEV] [PATCH v2 8/8] apm821xx: add support for the Netgear Centria N900 WNDR4700/WNDR4720 tested-by   Marty Plummer
  • [LEDE-DEV] [PATCH v2 0/8] apm821xx: apm821xx platform   Chris Blake
• [LEDE-DEV] ar71xx: add tp-link 841nd-v9-vn board - 8mbit flash isp oem variant   Luke McKee
• [LEDE-DEV] [PATCH] ramips: Cleanup etc/board.d/02_network   p.wassi at gmx.at
  • [LEDE-DEV] [PATCH] ramips: Cleanup etc/board.d/02_network   Jo-Philipp Wich
• [LEDE-DEV] [PATCH netifd 1/3] proto-shell: Model config parameter "no-proto-task" as a proto flag   Hans Dedecker
  • [LEDE-DEV] [PATCH netifd 2/3] interface: Only teardown interfaces having no proto task when l3_dev link lost   Hans Dedecker
    • [LEDE-DEV] [OpenWrt-Devel] [PATCH netifd 2/3] interface: Only teardown interfaces having no proto task when l3_dev link lost   Hans Dedecker
      • [LEDE-DEV] [OpenWrt-Devel] [PATCH netifd 2/3] interface: Only teardown interfaces having no proto task when l3_dev link lost   Felix Fietkau
      • [LEDE-DEV] [OpenWrt-Devel] [PATCH netifd 2/3] interface: Only teardown interfaces having no proto task when l3_dev link lost   Yousong Zhou
      • [LEDE-DEV] [OpenWrt-Devel] [PATCH netifd 2/3] interface: Only teardown interfaces having no proto task when l3_dev link lost   Felix Fietkau
      • [LEDE-DEV] [OpenWrt-Devel] [PATCH netifd 2/3] interface: Only teardown interfaces having no proto task when l3_dev link lost   Hans Dedecker
      • [LEDE-DEV] [OpenWrt-Devel] [PATCH netifd 2/3] interface: Only teardown interfaces having no proto task when l3_dev link lost   Felix Fietkau
      • [LEDE-DEV] [OpenWrt-Devel] [PATCH netifd 2/3] interface: Only teardown interfaces having no proto task when l3_dev link lost   Hans Dedecker
  • [LEDE-DEV] [PATCH netifd 3/3] proto: Display proto flags when dumping the protocol handlers in ubus   Hans Dedecker
• [LEDE-DEV] sysupgrade on lantiq xrx200 form openwrt to lede   Florian Eckert
  • [LEDE-DEV] sysupgrade on lantiq xrx200 form openwrt to lede   Syrone Wong
• [LEDE-DEV] Mail notifications from Flyspray   Ted Hess
• [LEDE-DEV] MT7621: 2 or 4 CPUs?   Gaetano Catalli
  • [LEDE-DEV] MT7621: 2 or 4 CPUs?   Daniel Golle
    • [LEDE-DEV] MT7621: 2 or 4 CPUs?   Gaetano Catalli
• [LEDE-DEV] [PATCH] procd: instance_stop causes a call to instance_removepid via instance_exit, no need to do this already when the instance will be stopped.   Jurgen Van Ham
• [LEDE-DEV] ubi images with lantiq   Florian Eckert
• [LEDE-DEV] How to compile hostapd such that there is a full WPA2 Enterprise auhenticator/supplicant?   frm frm
  • [LEDE-DEV] How to compile hostapd such that there is a full WPA2 Enterprise auhenticator/supplicant?   frm frm
    • [LEDE-DEV] How to compile hostapd such that there is a full WPA2 Enterprise auhenticator/supplicant?   Felix Fietkau
      • [LEDE-DEV] How to compile hostapd such that there is a full WPA2 Enterprise auhenticator/supplicant?   frm frm
      • [LEDE-DEV] How to compile hostapd such that there is a full WPA2 Enterprise auhenticator/supplicant?   Jo-Philipp Wich
      • [LEDE-DEV] How to compile hostapd such that there is a full WPA2 Enterprise auhenticator/supplicant?   frm frm
      • [LEDE-DEV] How to compile hostapd such that there is a full WPA2 Enterprise auhenticator/supplicant?   Felix Fietkau
• [LEDE-DEV] [PATCH] ledtrig-usbdev: use upstream function for iterating USB devices   Rafał Miłecki
• [LEDE-DEV] [PATCH] x86/generic: enable CONFIG_SATA_VIA   Florian Klink
• [LEDE-DEV] WDS and WPA Enterprise: Can it be done   frm frm
• [LEDE-DEV] [PATCH v5] base-files: seed /dev/urandom   Daniel Golle
  • [LEDE-DEV] [PATCH v5] base-files: seed /dev/urandom   Jo-Philipp Wich
    • [LEDE-DEV] [PATCH v5] base-files: seed /dev/urandom   Etienne Champetier
      • [LEDE-DEV] [PATCH v5] base-files: seed /dev/urandom   Etienne Champetier
  • [LEDE-DEV] [PATCH v5] base-files: seed /dev/urandom   Etienne Champetier
• [LEDE-DEV] wrong switch configuration   e9hack
  • [LEDE-DEV] wrong switch configuration   Jo-Philipp Wich
    • [LEDE-DEV] wrong switch configuration   e9hack
• [LEDE-DEV] Ethernet link up/down mt7688 board not detected by hotplug   Baptiste Clenet
  • [LEDE-DEV] Ethernet link up/down mt7688 board not detected by hotplug   Baptiste Clenet
    • [LEDE-DEV] Ethernet link up/down mt7688 board not detected by hotplug   Baptiste Clenet
• [LEDE-DEV] [PATCH] base-files: use procd init for urandom_seed   Etienne CHAMPETIER
• [LEDE-DEV] Netgear WNAP210 support   Miha Verlič
• [LEDE-DEV] May be out of commission   Daniel Dickinson
• [LEDE-DEV] hnet-full & LEDE: bug report   Rich Brown
  • [LEDE-DEV] hnet-full & LEDE: bug report   Dave Taht
• [LEDE-DEV] libelf1 build error for MT7688 board   Vivian Noronha
• [LEDE-DEV] [PATCH v2] base-files: use procd init for urandom_seed   Etienne CHAMPETIER
• [LEDE-DEV] [PATCH v3 0/9] apm821xx: apm821xx platform and devices   Christian Lamparter
  • [LEDE-DEV] [PATCH v3 2/9] apm821xx: add support for the apm821xx device target   Christian Lamparter
  • [LEDE-DEV] [PATCH v3 3/9] apm821xx: add support for the Cisco Meraki MR24   Christian Lamparter
  • [LEDE-DEV] [PATCH v3 4/9] apm821xx: dw_dmac: backport fixes and cleanups from 4.7   Christian Lamparter
  • [LEDE-DEV] [PATCH v3 5/9] apm821xx: sata_dwc_460ex: backport fixes and cleanups from 4.7   Christian Lamparter
  • [LEDE-DEV] [PATCH v3 6/9] apm821xx: add support for the Western Digital MyBook Live Series   Christian Lamparter
  • [LEDE-DEV] [PATCH v3 7/9] apm821xx: tc654: add driver for Microchip TC654/TC655 PWM fan controllers   Christian Lamparter
  • [LEDE-DEV] [PATCH v3 8/9] apm821xx: lm90 add thermal sensor interface support for device tree   Christian Lamparter
  • [LEDE-DEV] [PATCH v3 9/9] apm821xx: add support for the Netgear Centria N900 WNDR4700/WNDR4720   Christian Lamparter
  • [LEDE-DEV] [PATCH v3 0/9] apm821xx: apm821xx platform and devices   Felix Fietkau
    • [LEDE-DEV] [PATCH v3 0/9] apm821xx: apm821xx platform and devices   Christian Lamparter
• [LEDE-DEV] [PATCH v3 1/9] ppc4xx: remove booke-wdt watchdog package   Christian Lamparter
  • [LEDE-DEV] [PATCH v3 1/9] ppc4xx: remove booke-wdt watchdog package   Florian Fainelli
    • [LEDE-DEV] [PATCH v3 1/9] ppc4xx: remove booke-wdt watchdog package   Christian Lamparter
      • [LEDE-DEV] [PATCH v3 1/9] ppc4xx: remove booke-wdt watchdog package   Florian Fainelli
• [LEDE-DEV] flash issue   e9hack
  • [LEDE-DEV] flash issue   e9hack
  • [LEDE-DEV] flash issue   Conor O'Gorman
    • [LEDE-DEV] flash issue   e9hack
      • [LEDE-DEV] flash issue   Conor O'Gorman
      • [LEDE-DEV] flash issue   e9hack
      • [LEDE-DEV] flash issue   e9hack
      • [LEDE-DEV] flash issue   e9hack
• [LEDE-DEV] Add ARC platforms to platforms wiki   Alexey Brodkin
  • [LEDE-DEV] [OpenWrt-Devel] Add ARC platforms to platforms wiki   Florian Fainelli
    • [LEDE-DEV] [OpenWrt-Devel] Add ARC platforms to platforms wiki   Alexey Brodkin
• [LEDE-DEV] [PATCH 1/4] bugcheck: Add tools to poll for and report certain bugs.   greearb at candelatech.com
  • [LEDE-DEV] [PATCH 1/4] bugcheck: Add tools to poll for and report certain bugs.   John Crispin
    • [LEDE-DEV] [PATCH 1/4] bugcheck: Add tools to poll for and report certain bugs.   Ben Greear
• [LEDE-DEV] [PATCH 2/4] ath10k-ct: Update to latest ath10k-ct driver.   greearb at candelatech.com
• [LEDE-DEV] [PATCH 3/4] ath10k-ct-firmware: Update to latest 9880 firmware.   greearb at candelatech.com
• [LEDE-DEV] [PATCH 4/4] ath10k: Support installing CT firmware for QCA9984 NICs.   greearb at candelatech.com
• [LEDE-DEV] [PATCH] lantiq: fix image creation of P2812HNUF3 & BTHOMEHUBV3A   Mathias Kresin
• [LEDE-DEV] Do we really need 000-keep_initrafs_the_default.patch?   Alexey Brodkin
  • [LEDE-DEV] Do we really need 000-keep_initrafs_the_default.patch?   Felix Fietkau
• [LEDE-DEV] [PATCH] sunxi/pcduino3: Remove selection of absent rtl8188eu   Alexey Brodkin
• [LEDE-DEV] [PATCH] linux: Get rid of 000-keep_initrafs_the_default.patch   Alexey Brodkin
  • [LEDE-DEV] [PATCH] linux: Get rid of 000-keep_initrafs_the_default.patch   Jonas Gorski
• [LEDE-DEV] [PATCH] brcm63xx: fix HG556a C button   dani
• [LEDE-DEV] ledtrig-usbdev   e9hack
  • [LEDE-DEV] ledtrig-usbdev   Rafał Miłecki
    • [LEDE-DEV] ledtrig-usbdev   Felix Fietkau
• [LEDE-DEV] [PATCH 1/2] apm821xx: use lzma compression for the initramfs images   Christian Lamparter
• [LEDE-DEV] [PATCH 2/2] apm821xx: fix atheros PCIe cards on the MR24   Christian Lamparter
• [LEDE-DEV] replacing polarssl with openssl libs   Daniel Petre
• [LEDE-DEV] [PATCH 0/2] ramips: unify etc/board.d/01_leds configuration   p.wassi at gmx.at
  • [LEDE-DEV] [PATCH ver. A] ramips: unify etc/board.d/01_leds configuration   p.wassi at gmx.at
  • [LEDE-DEV] [PATCH ver. B] ramips: unify etc/board.d/01_leds configuration   p.wassi at gmx.at
    • [LEDE-DEV] [PATCH ver. B] ramips: unify etc/board.d/01_leds configuration   John Crispin
      • [LEDE-DEV] [PATCH ver. B] ramips: unify etc/board.d/01_leds configuration   p.wassi at gmx.at
      • [LEDE-DEV] [PATCH ver. B] ramips: unify etc/board.d/01_leds configuration   John Crispin
      • [LEDE-DEV] [PATCH ver. B] ramips: unify etc/board.d/01_leds configuration   p.wassi at gmx.at
      • [LEDE-DEV] [PATCH ver. B] ramips: unify etc/board.d/01_leds configuration   p.wassi at gmx.at
• [LEDE-DEV] [PATCH] ramips: remove indentation in etc/board.d/01_leds   p.wassi at gmx.at
• [LEDE-DEV] [PATCH] ramips: add get_port_stats to mt7530 swconfig driver   p.wassi at gmx.at
  • [LEDE-DEV] [PATCH] ramips: add get_port_stats to mt7530 swconfig driver   John Crispin
    • [LEDE-DEV] [PATCH] ramips: add get_port_stats to mt7530 swconfig driver   p.wassi at gmx.at
      • [LEDE-DEV] [PATCH] ramips: add get_port_stats to mt7530 swconfig driver   John Crispin
• [LEDE-DEV] preinit of ip address doesn't work   e9hack
  • [LEDE-DEV] preinit of ip address doesn't work   John Crispin
    • [LEDE-DEV] preinit of ip address doesn't work   e9hack
• [LEDE-DEV] lede forum   tapper
  • [LEDE-DEV] lede forum   moeller0
    • [LEDE-DEV] lede forum   Ted Hess
      • [LEDE-DEV] lede forum   A. Benz
      • [LEDE-DEV] lede forum   Micha Stöcker
      • [LEDE-DEV] lede forum   Andrew | PolkaSpots
      • [LEDE-DEV] lede forum   Micha Stöcker
      • [LEDE-DEV] lede forum   tapper
      • [LEDE-DEV] lede forum   tapper
      • [LEDE-DEV] lede forum   koniu
      • [LEDE-DEV] lede forum   David Lang
  • [LEDE-DEV] lede forum   Rich Brown
  • [LEDE-DEV] lede forum   Rich Brown
  • [LEDE-DEV] lede forum   Rich Brown
    • [LEDE-DEV] lede forum   Russell Senior
      • [LEDE-DEV] lede forum   Rich Brown
      • [LEDE-DEV] lede forum   Nicolás Echániz
• [LEDE-DEV] [PATCH 0/1] reload wireless device when config changes   Eduardo Abinader
• [LEDE-DEV] [PATCH 1/1] netifd: reload wireless device when config changes   Eduardo Abinader
• [LEDE-DEV] [PATCH] mesh: Set correct secondary channel offset if HT40 is disabled   Koen Vandeputte
• [LEDE-DEV] [PATCH 1/2] docs: development: add instructions for staging trees   Daniel Golle
  • [LEDE-DEV] [PATCH 1/2] docs: development: add instructions for staging trees   Jo-Philipp Wich
• [LEDE-DEV] [PATCH 2/2] docs: index: replace 'router' with 'device'   Daniel Golle
  • [LEDE-DEV] [PATCH 2/2] docs: index: replace 'router' with 'device'   Jo-Philipp Wich
• [LEDE-DEV] procd - shutdown. Why ?   reiner otto
  • [LEDE-DEV] procd - shutdown. Why ?   John Crispin
• [LEDE-DEV] [PATCH v2] ramips: unify etc/board.d/01_leds configuration   p.wassi at gmx.at
• [LEDE-DEV] [PATCH] wpa_supplicant: fix forced HT20/HT40 selection in IBSS and MESH mode   Koen Vandeputte
• [LEDE-DEV] [PATCH] linux/arc*: disable MAC frame filter in DW GMAC   Alexey Brodkin
  • [LEDE-DEV] [PATCH] linux/arc*: disable MAC frame filter in DW GMAC   Felix Fietkau
    • [LEDE-DEV] [PATCH] linux/arc*: disable MAC frame filter in DW GMAC   Alexey Brodkin
• [LEDE-DEV] [PATCH] b53: allow ports with higher numbers than CPU port   Rafał Miłecki
  • [LEDE-DEV] [PATCH] b53: allow ports with higher numbers than CPU port   Jonas Gorski
• [LEDE-DEV] [PATCH ugps 0/7] Few fixes and additions   Petr Štetiar
  • [LEDE-DEV] [PATCH ugps 2/7] Switch to ulog for logging and add few commandline params   Petr Štetiar
  • [LEDE-DEV] [PATCH ugps 4/7] Use strsep for NMEA message tokenization   Petr Štetiar
  • [LEDE-DEV] [PATCH ugps 5/7] Fix typo in error message   Petr Štetiar
  • [LEDE-DEV] [PATCH ugps 6/7] Show more useful error message if we can't open GPS device   Petr Štetiar
  • [LEDE-DEV] [PATCH ugps 7/7] Allow bigger lat/lng numbers in RMC message   Petr Štetiar
• [LEDE-DEV] [PATCH ugps 1/7] cmake: Add proper library and include files search logic for dependecies   Petr Štetiar
• [LEDE-DEV] [PATCH ugps 3/7] Bail out if we can't find GPS device   Petr Štetiar
• [LEDE-DEV] [PATCH] toolchain/gcc/arc-2016.03: Fix building on hosts with gcc 6.x   Alexey Brodkin
• [LEDE-DEV] [PATCH] ramips: Improve Archer C20i support   p.wassi at gmx.at
  • [LEDE-DEV] [PATCH] ramips: Improve Archer C20i support   Piotr Dymacz
    • [LEDE-DEV] [PATCH] ramips: Improve Archer C20i support   p.wassi at gmx.at
      • [LEDE-DEV] [PATCH] ramips: Improve Archer C20i support   Piotr Dymacz
• [LEDE-DEV] [PATCH v2] ramips: Improve TP-Link Archer C20i support   p.wassi at gmx.at
• [LEDE-DEV] [PATCH] ramips: Rename TP-Link Archer C50 LEDs   p.wassi at gmx.at
• [LEDE-DEV] [RFC 0/2] zynq: rework image build code   Jo-Philipp Wich
  • [LEDE-DEV] [RFC 2/2] zynq: fix maintainer email address   Jo-Philipp Wich
    • [LEDE-DEV] [RFC 2/2] zynq: fix maintainer email address   Jason Wu
  • [LEDE-DEV] [RFC 0/2] zynq: rework image build code   Jason Wu
• [LEDE-DEV] [RFC 1/2] zynq: convert to new image build code   Jo-Philipp Wich
  • [LEDE-DEV] [RFC 1/2] zynq: convert to new image build code   Jason Wu
• [LEDE-DEV] [PATCH] brcm63xx: fix CT-536p/CT-5621T support   dani
  • [LEDE-DEV] [PATCH] brcm63xx: fix CT-536p/CT-5621T support   Jonas Gorski
• [LEDE-DEV] How to build kernel module with debugging symbols?   Ben Greear
• [LEDE-DEV] [PATCH] ipq806x: fix boot hang if cmdline contains words with r in the middle   Jonas Gorski
• [LEDE-DEV] [RFC/RFT 0/7] base-files: use board.d for failsafe network setup   Jonas Gorski
  • [LEDE-DEV] [RFC/RFT 3/7] base-files: allow failsafe to configure vlans   Jonas Gorski
  • [LEDE-DEV] [RFC/RFT 4/7] base-files: configure switch in failsafe   Jonas Gorski
  • [LEDE-DEV] [RFC/RFT 5/7] targets: remove trivial set_preinit_iface_*   Jonas Gorski
  • [LEDE-DEV] [RFC/RFT 6/7] ramips: switch to generic failsafe iface setup   Jonas Gorski
  • [LEDE-DEV] [RFC/RFT 7/7] ath25: switch to generic failsafe iface setup   Jonas Gorski
• [LEDE-DEV] [RFC/RFT 1/7] base-files: split config generation out of board_detect   Jonas Gorski
• [LEDE-DEV] [RFC/RFT 2/7] base-files: add preinit ifname detection based on board.json   Jonas Gorski
• [LEDE-DEV] dnsmasq   e9hack
  • [LEDE-DEV] dnsmasq   Felix Fietkau
    • [LEDE-DEV] dnsmasq   e9hack
      • [LEDE-DEV] dnsmasq   Felix Fietkau
      • [LEDE-DEV] dnsmasq   e9hack
      • [LEDE-DEV] dnsmasq   Felix Fietkau
      • [LEDE-DEV] dnsmasq   e9hack
      • [LEDE-DEV] dnsmasq   e9hack
    • [LEDE-DEV] dnsmasq   e9hack
• [LEDE-DEV] starting reproducible builds   Alexander Couzens
• [LEDE-DEV] x86_64 kernel panic   Lucian Cristian
  • [LEDE-DEV] x86_64 kernel panic   Matthias Schiffer
    • [LEDE-DEV] x86_64 kernel panic   Felix Fietkau
      • [LEDE-DEV] x86_64 kernel panic   Felix Fietkau
• [LEDE-DEV] target-specific defaults   Daniel Golle
• [LEDE-DEV] Compiling ar71xx/generic/wrt400n does not lead to installable packages   Frank Horowitz
  • [LEDE-DEV] Compiling ar71xx/generic/wrt400n does not lead to installable packages   Yousong Zhou
    • [LEDE-DEV] Compiling ar71xx/generic/wrt400n does not lead to installable firmware   Frank Horowitz
      • [LEDE-DEV] Compiling ar71xx/generic/wrt400n does not lead to installable firmware   Frank Horowitz
  • [LEDE-DEV] Compiling ar71xx/generic/wrt400n does not lead to installable packages   Jo-Philipp Wich
• [LEDE-DEV] luci-mod-admin-full   e9hack
  • [LEDE-DEV] luci-mod-admin-full   Jo-Philipp Wich
• [LEDE-DEV] OpenWrt Summit RFP   Hauke Mehrtens
• [LEDE-DEV] [PATCH] build: do not fail if subversion is not installed   Hauke Mehrtens

Last message date: Sun Jul 31 14:43:40 PDT 2016
Archived on: Sun Jul 31 14:44:14 PDT 2016

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...