[LEDE-DEV] [PATCH ver. B] ramips: unify etc/board.d/01_leds configuration
John Crispin
john at phrozen.org
Sat Jul 23 13:07:00 PDT 2016
Hi,
why is this change needed >
John
On 23/07/2016 16:42, p.wassi at gmx.at wrote:
> From: P.Wassi <p.wassi at gmx.at>
>
> Enhance local set_*_led functions to allow more parameters
> Signed-off-by: P.Wassi <p.wassi at gmx.at>
> ---
> linux/ramips/base-files/etc/board.d/01_leds | 148 ++++++++--------
> 1 file changed, 74 insertions(+), 74 deletions(-)
>
> diff -rupN a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
> --- a/target/linux/ramips/base-files/etc/board.d/01_leds
> +++ b/target/linux/ramips/base-files/etc/board.d/01_leds
> @@ -4,11 +4,11 @@
> . /lib/ramips.sh
>
> set_usb_led() {
> - ucidef_set_led_usbdev "usb" "USB" "$1" "1-1"
> + ucidef_set_led_usbdev "usb" "USB" "$1" "$2"
> }
>
> set_wifi_led() {
> - ucidef_set_led_netdev "wifi_led" "wifi" "$1" "wlan0"
> + ucidef_set_led_netdev "wifi_led" "wifi" "$1" "$2"
> }
>
>
> @@ -19,16 +19,16 @@ board_config_update
> case $board in
> 3g150b|\
> 3g300m)
> - set_usb_led "$board:blue:3g"
> + set_usb_led "$board:blue:3g" "1-1"
> ;;
> 3g-6200n)
> - set_wifi_led "$board:amber:wlan"
> - set_usb_led "$board:blue:3g"
> + set_wifi_led "$board:amber:wlan" "wlan0"
> + set_usb_led "$board:blue:3g" "1-1"
> ;;
> 3g-6200nl|\
> br-6475nd|\
> mzk-w300nh2)
> - set_wifi_led "$board:amber:wlan"
> + set_wifi_led "$board:amber:wlan" "wlan0"
> ;;
> a5-v11|\
> cs-qr10)
> @@ -36,11 +36,11 @@ cs-qr10)
> ;;
> ai-br100)
> ucidef_set_led_netdev "wan" "wan" "$board:blue:wan" "eth0.2"
> - set_wifi_led "$board:blue:wlan"
> + set_wifi_led "$board:blue:wlan" "wlan0"
> ;;
> air3gii)
> - set_wifi_led "$board:green:wlan"
> - set_usb_led "$board:green:mobile"
> + set_wifi_led "$board:green:wlan" "wlan0"
> + set_usb_led "$board:green:mobile" "1-1"
> ;;
> all0239-3g|\
> hw550-3g|\
> @@ -48,54 +48,54 @@ mofi3500-3gn|\
> sap-g3200u3|\
> sk-wb8|\
> wf-2881)
> - set_usb_led "$board:green:usb"
> + set_usb_led "$board:green:usb" "1-1"
> ;;
> all0256n)
> ucidef_set_rssimon "wlan0" "40000" "1"
> ucidef_set_led_rssi "rssilow" "RSSILOW" "$board:green:rssilow" "wlan0" "1" "40" "0" "6"
> ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "$board:green:rssimed" "wlan0" "30" "80" "-29" "5"
> ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$board:green:rssihigh" "wlan0" "70" "100" "-69" "8"
> - set_wifi_led "rt2800pci-phy0::radio"
> + set_wifi_led "rt2800pci-phy0::radio" "wlan0"
> ;;
> ar670w|\
> ar725w|\
> awapn2403)
> - set_wifi_led "rt2800soc-phy0::radio"
> + set_wifi_led "rt2800soc-phy0::radio" "wlan0"
> ;;
> asl26555)
> ucidef_set_led_default "power" "POWER" "$board:green:power" "1"
> ucidef_set_led_netdev "eth" "ETH" "$board:green:eth" "eth0"
> - set_wifi_led "$board:green:wlan"
> - set_usb_led "$board:green:3g"
> + set_wifi_led "$board:green:wlan" "wlan0"
> + set_usb_led "$board:green:3g" "1-1"
> ;;
> bc2)
> - set_usb_led "$board:blue:usb"
> + set_usb_led "$board:blue:usb" "1-1"
> ;;
> br-6425)
> - set_wifi_led "$board:orange:wlan"
> + set_wifi_led "$board:orange:wlan" "wlan0"
> ;;
> broadway)
> - set_usb_led "$board:red:diskmounted"
> - set_wifi_led "$board:red:wps_active"
> + set_usb_led "$board:red:diskmounted" "1-1"
> + set_wifi_led "$board:red:wps_active" "wlan0"
> ;;
> c50)
> ucidef_set_led_default "power" "power" "tp-link:blue:power" "0"
> ucidef_set_led_netdev "lan" "lan" "tp-link:blue:lan" "eth0.2"
> - set_usb_led "tp-link:blue:usb"
> + set_usb_led "tp-link:blue:usb" "1-1"
> ucidef_set_led_wlan "wlan2g" "wlan2g" "tp-link:blue:wlan2g" "phy1radio"
> ucidef_set_led_wlan "wlan5g" "wlan5g" "tp-link:blue:wlan5g" "phy0radio"
> ;;
> cf-wr800n)
> ucidef_set_led_netdev "lan" "lan" "$board:white:ethernet" eth0.1
> - set_wifi_led "$board:white:wifi"
> + set_wifi_led "$board:white:wifi" "wlan0"
> ;;
> cy-swr1100)
> ucidef_set_led_default "wps" "WPS" "$board:blue:wps" "0"
> - set_usb_led "$board:blue:usb"
> + set_usb_led "$board:blue:usb" "1-1"
> ;;
> d105)
> ucidef_set_led_default "power" "POWER" "$board:red:power" "1"
> - set_usb_led "$board:green:usb"
> + set_usb_led "$board:green:usb" "1-1"
> ;;
> db-wrt01)
> ucidef_set_led_default "power" "power" "$board:orange:power" "1"
> @@ -113,7 +113,7 @@ dir-600-b1|\
> dir-600-b2|\
> dir-620-a1)
> ucidef_set_led_default "wan" "WAN LED (amber)" "$board:amber:wan" "1"
> - set_wifi_led "rt2800pci-phy0::radio"
> + set_wifi_led "rt2800pci-phy0::radio" "wlan0"
> ;;
> dir-300-b7|\
> dir-320-b1|\
> @@ -124,16 +124,16 @@ sl-r7205|\
> v11st-fe|\
> w306r-v20|\
> wt1520)
> - set_wifi_led "rt2800pci-phy0::radio"
> + set_wifi_led "rt2800pci-phy0::radio" "wlan0"
> ;;
> dir-615-d|\
> dir-615-h1)
> ucidef_set_led_default "status" "Status LED (amber)" "$board:amber:status" "0"
> - set_wifi_led "rt2800pci-phy0::radio"
> + set_wifi_led "rt2800pci-phy0::radio" "wlan0"
> ;;
> dir-620-d1|\
> mzk-ex300np)
> - set_wifi_led "$board:green:wifi"
> + set_wifi_led "$board:green:wifi" "wlan0"
> ;;
> dir-810l|\
> mzk-750dhp|\
> @@ -145,60 +145,60 @@ dir-860l-b1)
> ;;
> ex2700)
> ucidef_set_led_default "power_r" "POWER (red)" "$board:red:power" "0"
> - set_wifi_led "$board:green:router"
> + set_wifi_led "$board:green:router" "wlan0"
> ;;
> f5d8235-v1|\
> f5d8235-v2)
> - set_usb_led "$board:blue:storage"
> + set_usb_led "$board:blue:storage" "1-1"
> ;;
> fonera20n)
> - set_usb_led "$board:orange:usb"
> - set_wifi_led "$board:orange:wifi"
> + set_usb_led "$board:orange:usb" "1-1"
> + set_wifi_led "$board:orange:wifi" "wlan0"
> ;;
> gl-mt300a|\
> gl-mt300n|\
> gl-mt750)
> - set_wifi_led "$board:wlan"
> + set_wifi_led "$board:wlan" "wlan0"
> ;;
> hc5661)
> ucidef_set_led_default "system" "system" "$board:blue:system" "1"
> ucidef_set_led_netdev "internet" "internet" "$board:blue:internet" "eth0.2"
> - set_wifi_led "$board:blue:wlan2g"
> + set_wifi_led "$board:blue:wlan2g" "wlan0"
> ;;
> hc5761)
> ucidef_set_led_default "system" "system" "$board:blue:system" "1"
> ucidef_set_led_netdev "internet" "internet" "$board:blue:internet" "eth0.2"
> - set_wifi_led "$board:blue:wlan2g"
> + set_wifi_led "$board:blue:wlan2g" "wlan0"
> ucidef_set_led_netdev "wifi5g" "wifi5g" "$board:blue:wlan5g" "rai0"
> ;;
> hc5861)
> ucidef_set_led_default "system" "system" "$board:blue:system" "1"
> ucidef_set_led_netdev "internet" "internet" "$board:blue:internet" "eth0.2"
> - set_wifi_led "$board:blue:wlan2g"
> + set_wifi_led "$board:blue:wlan2g" "wlan0"
> ucidef_set_led_netdev "wifi5g" "wifi5g" "$board:blue:wlan5g" "rai0"
> ucidef_set_led_default "turbo" "turbo" "$board:blue:turbo" "0"
> ;;
> hg255d)
> - set_wifi_led "$board:green:wlan"
> - set_usb_led "$board:green:usb"
> + set_wifi_led "$board:green:wlan" "wlan0"
> + set_usb_led "$board:green:usb" "1-1"
> ucidef_set_led_netdev "internet" "internet" "$board:green:internet" "eth0.2"
> ;;
> hpm)
> ucidef_set_led_default "power" "POWER" "$board:orange:power" "1"
> ucidef_set_led_netdev "eth" "ETH" "$board:green:eth" "eth0"
> - set_wifi_led "$board:green:wifi"
> + set_wifi_led "$board:green:wifi" "wlan0"
> ;;
> ht-tm02)
> ucidef_set_led_netdev "eth" "Ethernet" "$board:green:lan" "eth0"
> - set_wifi_led "$board:blue:wlan"
> + set_wifi_led "$board:blue:wlan" "wlan0"
> ;;
> m2m)
> - set_wifi_led "$board:blue:wifi"
> + set_wifi_led "$board:blue:wifi" "wlan0"
> ucidef_set_led_netdev "eth" "Ethernet" "$board:green:wan" "eth0"
> ;;
> miniembplug)
> - set_wifi_led "$board:red:wlan"
> - set_usb_led "$board:green:mobile"
> + set_wifi_led "$board:red:wlan" "wlan0"
> + set_usb_led "$board:green:mobile" "1-1"
> ;;
> miwifi-mini|\
> miwifi-nano)
> @@ -211,30 +211,30 @@ miwifi-nano)
> ;;
> mlw221|\
> mlwg2)
> - set_wifi_led "$board:blue:wifi"
> + set_wifi_led "$board:blue:wifi" "wlan0"
> ucidef_set_led_default "system" "system" "$board:blue:system" "1"
> ;;
> mpr-a1|\
> mpr-a2)
> - set_wifi_led "$board:blue:system"
> + set_wifi_led "$board:blue:system" "wlan0"
> ;;
> mr-102n)
> - set_wifi_led "$board:green:wlan"
> - set_usb_led "$board:green:usb"
> + set_wifi_led "$board:green:wlan" "wlan0"
> + set_usb_led "$board:green:usb" "1-1"
> ;;
> mzk-ex750np)
> ucidef_set_led_default "power" "power" "$board:red:power" "1"
> - set_wifi_led "$board:red:wifi"
> + set_wifi_led "$board:red:wifi" "wlan0"
> ;;
> na930)
> - set_usb_led "$board:blue:status"
> + set_usb_led "$board:blue:status" "1-1"
> ;;
> nw718)
> - set_usb_led "$board:amber:usb"
> + set_usb_led "$board:amber:usb" "1-1"
> ;;
> oy-0001)
> ucidef_set_led_default "power" "power" "$board:green:power" "1"
> - set_wifi_led "$board:green:wifi"
> + set_wifi_led "$board:green:wifi" "wlan0"
> ;;
> pbr-m1)
> ucidef_set_led_netdev "internet" "internet" "$board:blue:internet" "eth0.2"
> @@ -242,11 +242,11 @@ pbr-m1)
> ucidef_set_led_default "sys" "sys" "$board:blue:sys" "1"
> ;;
> psg1208)
> - set_wifi_led "$board:white:wlan2g"
> + set_wifi_led "$board:white:wlan2g" "wlan0"
> ;;
> px-4885)
> - set_wifi_led "$board:orange:wifi"
> - set_usb_led "$board:blue:storage"
> + set_wifi_led "$board:orange:wifi" "wlan0"
> + set_usb_led "$board:blue:storage" "1-1"
> ;;
> re6500)
> ucidef_set_led_default "power" "power" "$board:white:power" "1"
> @@ -254,29 +254,29 @@ re6500)
> ;;
> rp-n53)
> ucidef_set_led_netdev "eth" "Network" "$board:white:back" "eth0"
> - set_wifi_led "$board:blue:wifi"
> + set_wifi_led "$board:blue:wifi" "wlan0"
> ;;
> rt-n14u)
> ucidef_set_led_default "power" "power" "$board:blue:power" "1"
> ucidef_set_led_netdev "lan" "lan" "$board:blue:lan" eth0.1
> ucidef_set_led_netdev "wan" "wan" "$board:blue:wan" eth0.2
> - set_wifi_led "$board:blue:air"
> - set_usb_led "$board:blue:usb"
> + set_wifi_led "$board:blue:air" "wlan0"
> + set_usb_led "$board:blue:usb" "1-1"
> ;;
> tiny-ac)
> - set_wifi_led "$board:orange:wifi"
> - set_usb_led "$board:green:usb"
> + set_wifi_led "$board:orange:wifi" "wlan0"
> + set_usb_led "$board:green:usb" "1-1"
> ;;
> vocore)
> ucidef_set_led_netdev "eth" "ETH" "$board:orange:eth" "eth0"
> - set_wifi_led "$board:green:status"
> + set_wifi_led "$board:green:status" "wlan0"
> ;;
> w502u)
> - set_usb_led "$board:blue:usb"
> - set_wifi_led "rt2800pci-phy0::radio"
> + set_usb_led "$board:blue:usb" "1-1"
> + set_wifi_led "rt2800pci-phy0::radio" "wlan0"
> ;;
> wcr-150gn)
> - set_usb_led "$board:amber:user"
> + set_usb_led "$board:amber:user" "1-1"
> ;;
> whr-1166d|\
> whr-300hp2|\
> @@ -285,10 +285,10 @@ whr-600d)
> ucidef_set_led_default "router" "router" "$board:green:router" "1"
> ;;
> wnce2001)
> - set_wifi_led "$board:green:wlan"
> + set_wifi_led "$board:green:wlan" "wlan0"
> ;;
> wrh-300cr)
> - set_wifi_led "$board:green:wlan"
> + set_wifi_led "$board:green:wlan" "wlan0"
> ucidef_set_led_netdev "lan" "lan" "$board:green:ethernet" "eth0"
> ;;
> wndr3700v5)
> @@ -300,8 +300,8 @@ wt3020)
> y1|\
> y1s)
> ucidef_set_led_default "power" "power" "$board:blue:power" "1"
> - set_usb_led "$board:blue:usb"
> - set_wifi_led "$board:blue:wifi"
> + set_usb_led "$board:blue:usb" "1-1"
> + set_wifi_led "$board:blue:wifi" "wlan0"
> ;;
> zbt-ape522ii)
> ucidef_set_led_netdev "wlan2g4" "wlan1-link" "$board:green:wlan2g4" "wlan1"
> @@ -310,26 +310,26 @@ zbt-ape522ii)
> ;;
> zbt-wa05)
> ucidef_set_led_default "power" "power" "$board:blue:power" "1"
> - set_wifi_led "$board:blue:air"
> - set_usb_led "$board:blue:usb"
> + set_wifi_led "$board:blue:air" "wlan0"
> + set_usb_led "$board:blue:usb" "1-1"
> ;;
> zbt-we826)
> ucidef_set_led_default "power" "power" "$board:green:power" "1"
> - set_wifi_led "$board:green:wifi"
> - set_usb_led "$board:green:usb"
> + set_wifi_led "$board:green:wifi" "wlan0"
> + set_usb_led "$board:green:usb" "1-1"
> ;;
> zbt-wr8305rt)
> ucidef_set_led_default "power" "power" "$board:green:sys" "1"
> - set_usb_led "$board:green:usb"
> - set_wifi_led "$board:green:wifi"
> + set_usb_led "$board:green:usb" "1-1"
> + set_wifi_led "$board:green:wifi" "wlan0"
> ;;
> zte-q7)
> - set_wifi_led "$board:blue:status"
> + set_wifi_led "$board:blue:status" "wlan0"
> ;;
> youku-yk1)
> ucidef_set_led_default "power" "power" "$board:blue:power" "1"
> - set_wifi_led "$board:blue:air"
> - set_usb_led "$board:blue:usb"
> + set_wifi_led "$board:blue:air" "wlan0"
> + set_usb_led "$board:blue:usb" "1-1"
> ;;
> esac
>
>
> _______________________________________________
> Lede-dev mailing list
> Lede-dev at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/lede-dev
>
More information about the Lede-dev
mailing list