[LEDE-DEV] preinit of ip address doesn't work

[e9hack]

Am 25.07.2016 um 07:53 schrieb John Crispin:
> On 24/07/2016 14:50, e9hack wrote:
>> Hi,
>>
>> preinit of ip address during build doesn't work. If I ping to a booting router after
>> sysupgrade without restoring the old configuration, the configured ip address is visible
>> for 3 seconds only. In /etc/config/network the address is set to 192.168.1.1. It seems,
>> that the pre-configured ip address is visible for a short time at every boot,
>> independently what /etc/config/network contains.
>>
>> Regards,
>> Hartmut
>>
> 
> it is not possible to comment on this without knowing what hw you are using
> 
> 	John
> 

I'm using a TP-LINK WDR3600.

Regards,
Hartmut