September 2024 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...

Starting: Sun Sep 1 01:07:01 PDT 2024
Ending: Mon Sep 30 20:10:27 PDT 2024
Messages: 539

• [EXT] Re: [PATCH v16 4/8] drm: bridge: Cadence: Add MHDP8501 DP/HDMI driver   Sandor Yu
• [EXT] Re: [PATCH v16 4/8] drm: bridge: Cadence: Add MHDP8501 DP/HDMI driver   Sandor Yu
• [EXT] Re: [PATCH v16 4/8] drm: bridge: Cadence: Add MHDP8501 DP/HDMI driver   Maxime Ripard
• [EXT] Re: [PATCH v16 4/8] drm: bridge: Cadence: Add MHDP8501 DP/HDMI driver   Sandor Yu
• [EXT] Re: [PATCH v16 4/8] drm: bridge: Cadence: Add MHDP8501 DP/HDMI driver   Dmitry Baryshkov
• [EXT] Re: [PATCH v16 4/8] drm: bridge: Cadence: Add MHDP8501 DP/HDMI driver   Sandor Yu
• [EXT] Re: [PATCH v16 4/8] drm: bridge: Cadence: Add MHDP8501 DP/HDMI driver   Dmitry Baryshkov
• [EXT] Re: [PATCH v16 4/8] drm: bridge: Cadence: Add MHDP8501 DP/HDMI driver   Maxime Ripard
• [PATCH 0/2] Extending PLL LUT for i.MX8MP Samsung HDMI PHY   Frieder Schrempf
• [PATCH 0/2] Extending PLL LUT for i.MX8MP Samsung HDMI PHY   Dominique Martinet
• [PATCH 0/2] Extending PLL LUT for i.MX8MP Samsung HDMI PHY   Adam Ford
• [PATCH 0/2] Extending PLL LUT for i.MX8MP Samsung HDMI PHY   Dominique Martinet
• [PATCH 0/2] Extending PLL LUT for i.MX8MP Samsung HDMI PHY   Dominique Martinet
• [PATCH 0/2] Extending PLL LUT for i.MX8MP Samsung HDMI PHY   Frieder Schrempf
• [PATCH 0/2] Extending PLL LUT for i.MX8MP Samsung HDMI PHY   Frieder Schrempf
• [PATCH 0/2] Extending PLL LUT for i.MX8MP Samsung HDMI PHY   Frieder Schrempf
• [PATCH 0/2] MIPI DSI phy for rk3588   Martinus Stroomer
• [PATCH 0/3] arm64: dts: qcom: x1e80100: fix missing PCIe PHY clocks   Johan Hovold
• [PATCH 0/4] phy: Fix some typos in phy-airoha-pcie driver   Lorenzo Bianconi
• [PATCH 0/4] phy: qcom: qmp-usb: fix NULL-deref on runtime suspend   Johan Hovold
• [PATCH 0/4] phy: qcom: qmp-usb: fix NULL-deref on runtime suspend   Dmitry Baryshkov
• [PATCH 0/5] Add support for DisplayPort on SA8775P platform   Soutrik Mukhopadhyay
• [PATCH 0/5] dtbs_check warning clean up against fsl,mxs-usbphy.yaml   Xu Yang
• [PATCH 0/6] power: supply: Change usb_types from an array into a bitmask   Sebastian Reichel
• [PATCH 0/6] power: supply: Change usb_types from an array into a bitmask   Sebastian Reichel
• [PATCH 0/6] power: supply: Change usb_types from an array into a bitmask   Hans de Goede
• [PATCH 0/9] phy: sparx5-serdes: add support for lan969x serdes driver   Daniel Machon
• [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC   Biju Das
• [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC   claudiu beznea
• [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC   claudiu beznea
• [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC   Biju Das
• [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC   claudiu beznea
• [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC   Biju Das
• [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC   claudiu beznea
• [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC   Biju Das
• [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC   Biju Das
• [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC   claudiu beznea
• [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC   claudiu beznea
• [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC   Biju Das
• [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC   Ulf Hansson
• [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC   claudiu beznea
• [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC   claudiu beznea
• [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC   Biju Das
• [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC   Ulf Hansson
• [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC   Biju Das
• [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC   claudiu beznea
• [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC   Biju Das
• [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC   claudiu beznea
• [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC   Biju Das
• [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC   Biju Das
• [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC   claudiu beznea
• [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC   claudiu beznea
• [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC   Biju Das
• [PATCH 00/19] Add initial support for QCS8300   Jingyi Wang
• [PATCH 00/19] Add initial support for QCS8300   Krzysztof Kozlowski
• [PATCH 00/19] Add initial support for QCS8300   Krzysztof Kozlowski
• [PATCH 00/19] Add initial support for QCS8300   Rob Herring (Arm)
• [PATCH 01/19] dt-bindings: remoteproc: qcom,sa8775p-pas: Document QCS8300 remoteproc   Jingyi Wang
• [PATCH 02/19] remoteproc: qcom: pas: Add QCS8300 remoteproc support   Jingyi Wang
• [PATCH 02/19] remoteproc: qcom: pas: Add QCS8300 remoteproc support   Krzysztof Kozlowski
• [PATCH 03/19] dt-bindings: phy: Add QMP UFS PHY comptible for QCS8300   Jingyi Wang
• [PATCH 03/19] dt-bindings: phy: Add QMP UFS PHY comptible for QCS8300   Dmitry Baryshkov
• [PATCH 04/16] soc: renesas: Add SYSC driver for Renesas RZ/G3S   Geert Uytterhoeven
• [PATCH 04/16] soc: renesas: Add SYSC driver for Renesas RZ/G3S   claudiu beznea
• [PATCH 04/19] dt-bindings: ufs: qcom: Document the QCS8300 UFS Controller   Jingyi Wang
• [PATCH 05/19] phy: qcom-qmp-ufs: Add support for QCS8300   Jingyi Wang
• [PATCH 05/19] phy: qcom-qmp-ufs: Add support for QCS8300   Krzysztof Kozlowski
• [PATCH 06/19] dt-bindings: power: rpmpd: Add QCS8300 power domains   Jingyi Wang
• [PATCH 06/19] dt-bindings: power: rpmpd: Add QCS8300 power domains   Konrad Dybcio
• [PATCH 06/19] dt-bindings: power: rpmpd: Add QCS8300 power domains   Konrad Dybcio
• [PATCH 07/19] pmdomain: qcom: rpmhpd: Add QCS8300 power domains   Jingyi Wang
• [PATCH 08/19] dt-bindings: qcom,pdc: document QCS8300 Power Domain Controller   Jingyi Wang
• [PATCH 09/19] dt-bindings: arm-smmu: Add compatible for QCS8300 SoC   Jingyi Wang
• [PATCH 1/2] dt-bindings: phy: bcm-ns-usb2-phy: drop deprecated variant   Rafał Miłecki
• [PATCH 1/2] dt-bindings: phy: bcm-ns-usb2-phy: drop deprecated variant   Conor Dooley
• [PATCH 1/2] dt-bindings: phy: rockchip,inno-usb2phy: add rk3576   Frank Wang
• [PATCH 1/2] phy: freescale: fsl-samsung-hdmi: Add references for calculating LUT parameters to comment   Frieder Schrempf
• [PATCH 1/3] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: add missing x1e80100 pipediv2 clocks   Johan Hovold
• [PATCH 1/3] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: add missing x1e80100 pipediv2 clocks   Rob Herring (Arm)
• [PATCH 1/4] phy: airoha: Fix REG_CSR_2L_PLL_CMN_RESERVE0 config in airoha_pcie_phy_init_clk_out()   Lorenzo Bianconi
• [PATCH 1/4] phy: qcom: qmp-usb: fix NULL-deref on runtime suspend   Johan Hovold
• [PATCH 1/5] dt-bindings: phy: Add eDP PHY compatible for sa8775p   Soutrik Mukhopadhyay
• [PATCH 1/5] dt-bindings: phy: mxs-usb-phy: add imx8qxp compatible   Xu Yang
• [PATCH 1/5] dt-bindings: phy: mxs-usb-phy: add imx8qxp compatible   Conor Dooley
• [PATCH 1/6] power: supply: "usb_type" property may be written to   Greg Kroah-Hartman
• [PATCH 1/9] phy: sparx5-serdes: add support for private match data   Daniel Machon
• [PATCH 10/19] dt-bindings: firmware: qcom,scm: document SCM on QCS8300 SoCs   Jingyi Wang
• [PATCH 11/19] dt-bindings: soc: qcom: add qcom,qcs8300-imem compatible   Jingyi Wang
• [PATCH 12/19] dt-bindings: mailbox: qcom-ipcc: Document QCS8300 IPCC   Jingyi Wang
• [PATCH 13/19] dt-bindings: mfd: qcom,tcsr: Add compatible for QCS8300   Jingyi Wang
• [PATCH 14/19] dt-bindings: nvmem: qfprom: Add compatible for QCS8300   Jingyi Wang
• [PATCH 15/19] dt-bindings: soc: qcom,aoss-qmp: Document the QCS8300 AOSS channel   Jingyi Wang
• [PATCH 16/19] dt-bindings: arm: qcom: document QCS8275/QCS8300 SoC and reference board   Jingyi Wang
• [PATCH 16/19] dt-bindings: arm: qcom: document QCS8275/QCS8300 SoC and reference board   Krzysztof Kozlowski
• [PATCH 17/19] arm64: defconfig: enable clock controller, interconnect and pinctrl for QCS8300   Jingyi Wang
• [PATCH 17/19] arm64: defconfig: enable clock controller, interconnect and pinctrl for QCS8300   Krzysztof Kozlowski
• [PATCH 18/19] arm64: dts: qcom: add initial support for QCS8300 DTSI   Jingyi Wang
• [PATCH 18/19] arm64: dts: qcom: add initial support for QCS8300 DTSI   Krzysztof Kozlowski
• [PATCH 19/19] arm64: dts: qcom: add base QCS8300 RIDE dts   Jingyi Wang
• [PATCH 19/19] arm64: dts: qcom: add base QCS8300 RIDE dts   kernel test robot
• [PATCH 2/2] phy: bcm-ns-usb2: drop support for old binding variant   Rafał Miłecki
• [PATCH 2/2] phy: freescale: fsl-samsung-hdmi: Add PLL LUT entries for some non-CEA-861 modes   Frieder Schrempf
• [PATCH 2/2] phy: rockchip: inno-usb2: Add usb2 phys support for rk3576   Frank Wang
• [PATCH 2/3] arm64: dts: qcom: x1e80100: fix PCIe4 and PCIe6a PHY clocks   Johan Hovold
• [PATCH 2/3] arm64: dts: qcom: x1e80100: fix PCIe4 and PCIe6a PHY clocks   Abel Vesa
• [PATCH 2/3] arm64: dts: qcom: x1e80100: fix PCIe4 and PCIe6a PHY clocks   Konrad Dybcio
• [PATCH 2/4] phy: airoha: Fix REG_PCIE_PMA_TX_RESET config in airoha_pcie_phy_init_csr_2l()   Lorenzo Bianconi
• [PATCH 2/4] phy: qcom: qmp-usb-legacy: fix NULL-deref on runtime suspend   Johan Hovold
• [PATCH 2/5] arm64: dts: imx8dxl-ss-conn: change usbphy1 compatible   Xu Yang
• [PATCH 2/5] phy: qcom: edp: Introduce aux_cfg array for version specific aux settings   Soutrik Mukhopadhyay
• [PATCH 2/5] phy: qcom: edp: Introduce aux_cfg array for version specific aux settings   Dmitry Baryshkov
• [PATCH 2/5] phy: qcom: edp: Introduce aux_cfg array for version specific aux settings   Bjorn Andersson
• [PATCH 2/5] phy: qcom: edp: Introduce aux_cfg array for version specific aux settings   Soutrik Mukhopadhyay
• [PATCH 2/5] phy: qcom: edp: Introduce aux_cfg array for version specific aux settings   Soutrik Mukhopadhyay
• [PATCH 2/9] phy: sparx5-serdes: add constants to match data   Daniel Machon
• [PATCH 3/3] arm64: dts: qcom: x1e80100: fix PCIe5 PHY clocks   Johan Hovold
• [PATCH 3/3] arm64: dts: qcom: x1e80100: fix PCIe5 PHY clocks   Konrad Dybcio
• [PATCH 3/4] phy: airoha: Fix REG_CSR_2L_JCPLL_SDM_HREN config in airoha_pcie_phy_init_ssc_jcpll()   Lorenzo Bianconi
• [PATCH 3/4] phy: qcom: qmp-usbc: fix NULL-deref on runtime suspend   Johan Hovold
• [PATCH 3/5] arm64: dts: imx8qm: change usbphy1 compatible   Xu Yang
• [PATCH 3/5] phy: qcom: edp: Add support for eDP PHY on SA8775P   Soutrik Mukhopadhyay
• [PATCH 3/5] phy: qcom: edp: Add support for eDP PHY on SA8775P   Dmitry Baryshkov
• [PATCH 3/5] phy: qcom: edp: Add support for eDP PHY on SA8775P   Soutrik Mukhopadhyay
• [PATCH 3/9] phy: sparx5-serdes: add constant for the number of CMU's   Daniel Machon
• [PATCH 4/4] phy: airoha: Fix REG_CSR_2L_RX{0,1}_REV0 definitions   Lorenzo Bianconi
• [PATCH 4/4] phy: qcom: qmp-usb: move driver data initialisation earlier   Johan Hovold
• [PATCH 4/4] phy: qcom: qmp-usb: move driver data initialisation earlier   Johan Hovold
• [PATCH 4/5] arm64: dts: imx8qxp: change usbphy1 compatible   Xu Yang
• [PATCH 4/5] dt-bindings: display: msm: dp-controller: document SA8775P compatible   Soutrik Mukhopadhyay
• [PATCH 4/8] arm64: dts: qcom: x1e80100: Add support for PCIe3 on x1e80100   Qiang Yu
• [PATCH 4/9] phy: sparx5-serdes: add ops to match data   Daniel Machon
• [PATCH 5/5] ARM: dts: imx6qdl: convert fsl,tx-d-cal to correct value   Xu Yang
• [PATCH 5/5] drm/msm/dp: Add DisplayPort controller for SA8775P   Soutrik Mukhopadhyay
• [PATCH 5/5] drm/msm/dp: Add DisplayPort controller for SA8775P   Bjorn Andersson
• [PATCH 5/5] drm/msm/dp: Add DisplayPort controller for SA8775P   Soutrik Mukhopadhyay
• [PATCH 5/5] drm/msm/dp: Add DisplayPort controller for SA8775P   Bjorn Andersson
• [PATCH 5/5] drm/msm/dp: Add DisplayPort controller for SA8775P   Soutrik Mukhopadhyay
• [PATCH 5/5] drm/msm/dp: Add DisplayPort controller for SA8775P   Konrad Dybcio
• [PATCH 5/9] phy: sparx5-serdes: add function for getting the CMU index   Daniel Machon
• [PATCH 6/6] power: supply: Change usb_types from an array into a bitmask   Greg Kroah-Hartman
• [PATCH 6/6] power: supply: Change usb_types from an array into a bitmask   Hans de Goede
• [PATCH 6/6] power: supply: Change usb_types from an array into a bitmask   Greg Kroah-Hartman
• [PATCH 6/9] phy: sparx5-serdes: add indirection layer to register macros   Daniel Machon
• [PATCH 7/9] phy: sparx5-serdes: add support for branching on chip type   Daniel Machon
• [PATCH 8/8] PCI: qcom: Add support to PCIe slot power supplies   Qiang Yu
• [PATCH 8/8] PCI: qcom: Add support to PCIe slot power supplies   Manivannan Sadhasivam
• [PATCH 8/8] PCI: qcom: Add support to PCIe slot power supplies   Qiang Yu
• [PATCH 8/8] PCI: qcom: Add support to PCIe slot power supplies   Konrad Dybcio
• [PATCH 8/8] PCI: qcom: Add support to PCIe slot power supplies   Manivannan Sadhasivam
• [PATCH 8/8] PCI: qcom: Add support to PCIe slot power supplies   Dmitry Baryshkov
• [PATCH 8/8] PCI: qcom: Add support to PCIe slot power supplies   Qiang Yu
• [PATCH 8/9] dt-bindings: phy: sparx5: document lan969x in sparx5 dt-bindings   Daniel Machon
• [PATCH 8/9] dt-bindings: phy: sparx5: document lan969x in sparx5 dt-bindings   Krzysztof Kozlowski
• [PATCH 8/9] dt-bindings: phy: sparx5: document lan969x in sparx5 dt-bindings   Daniel Machon
• [PATCH 8/9] dt-bindings: phy: sparx5: document lan969x in sparx5 dt-bindings   Krzysztof Kozlowski
• [PATCH 8/9] dt-bindings: phy: sparx5: document lan969x in sparx5 dt-bindings   Daniel Machon
• [PATCH 8/9] dt-bindings: phy: sparx5: document lan969x in sparx5 dt-bindings   Krzysztof Kozlowski
• [PATCH 9/9] phy: lan969x-serdes: add support for lan969x serdes driver   Daniel Machon
• [PATCH] dt-bindings: phy: mediatek: tphy: add a property for power-domains   Macpaul Lin
• [PATCH] dt-bindings: phy: mediatek: tphy: add a property for power-domains   AngeloGioacchino Del Regno
• [PATCH] dt-bindings: phy: mediatek: tphy: add a property for power-domains   Conor Dooley
• [PATCH] phy: mvebu-cp110-utmi: support swapping d+/d- lanes by dts property   Josua Mayer
• [PATCH] phy: phy-rockchip-samsung-hdptx: Depend on CONFIG_COMMON_CLK   Cristian Ciocaltea
• [PATCH] phy: phy-rockchip-samsung-hdptx: Depend on CONFIG_COMMON_CLK   AngeloGioacchino Del Regno
• [PATCH] phy: phy-rockchip-samsung-hdptx: Depend on CONFIG_COMMON_CLK   Heiko Stuebner
• [PATCH] phy: phy-rockchip-samsung-hdptx: Don't request RST_PHY/RST_ROPLL/RST_LCPLL   Andy Yan
• [PATCH] phy: qcom: edp: Add runtime PM support   Abel Vesa
• [PATCH] phy: qcom: edp: Add runtime PM support   Dmitry Baryshkov
• [PATCH] phy: qcom: edp: Add runtime PM support   Bjorn Andersson
• [PATCH] phy: qcom: edp: Add runtime PM support   Abel Vesa
• [PATCH] phy: qcom: edp: Add runtime PM support   Abel Vesa
• [PATCH] phy: qcom: edp: Add runtime PM support   Dmitry Baryshkov
• [PATCH] phy: qcom: edp: Add runtime PM support   Abel Vesa
• [PATCH] phy: qcom: edp: Add runtime PM support   Johan Hovold
• [PATCH] phy: qcom: edp: Add runtime PM support   Abel Vesa
• [PATCH] phy: qcom: edp: Add runtime PM support   Johan Hovold
• [PATCH] phy: qcom: edp: Add runtime PM support   Abel Vesa
• [PATCH] phy: qcom: qmp: Fix lecacy-legacy typo   Konrad Dybcio
• [PATCH] phy: qcom: qmp: Fix lecacy-legacy typo   Dmitry Baryshkov
• [PATCH] phy: renesas: rcar-gen3-usb2: Fix an error handling path in rcar_gen3_phy_usb2_probe()   Christophe JAILLET
• [PATCH] phy: renesas: rcar-gen3-usb2: Fix an error handling path in rcar_gen3_phy_usb2_probe()   claudiu beznea
• [PATCH] phy: tegra: xusb: Add error pointer check in xusb.c   Dipendra Khadka
• [PATCH] phy: tegra: xusb: Call of_node_put(np) only once in tegra_xusb_padctl_get()   Markus Elfring
• [PATCH] phy: ti: phy-j721e-wiz: fix usxgmii configuration   Siddharth Vadapalli
• [PATCH v16 2/8] phy: Add HDMI configuration options   Dmitry Baryshkov
• [PATCH v16 4/8] drm: bridge: Cadence: Add MHDP8501 DP/HDMI driver   Sandor Yu
• [PATCH v16 4/8] drm: bridge: Cadence: Add MHDP8501 DP/HDMI driver   Maxime Ripard
• [PATCH v17 0/8] Initial support Cadence MHDP8501(HDMI/DP) for i.MX8MQ   Sandor Yu
• [PATCH v17 0/8] Initial support Cadence MHDP8501(HDMI/DP) for i.MX8MQ   Rob Herring (Arm)
• [PATCH v17 1/8] drm: bridge: Cadence: Create mhdp helper driver   Sandor Yu
• [PATCH v17 1/8] drm: bridge: Cadence: Create mhdp helper driver   Alexander Stein
• [PATCH v17 1/8] drm: bridge: Cadence: Create mhdp helper driver   Dmitry Baryshkov
• [PATCH v17 2/8] phy: Add HDMI configuration options   Sandor Yu
• [PATCH v17 2/8] phy: Add HDMI configuration options   Maxime Ripard
• [PATCH v17 3/8] dt-bindings: display: bridge: Add Cadence MHDP8501   Sandor Yu
• [PATCH v17 3/8] dt-bindings: display: bridge: Add Cadence MHDP8501   Krzysztof Kozlowski
• [PATCH v17 3/8] dt-bindings: display: bridge: Add Cadence MHDP8501   Dmitry Baryshkov
• [PATCH v17 3/8] dt-bindings: display: bridge: Add Cadence MHDP8501   Rob Herring (Arm)
• [PATCH v17 3/8] dt-bindings: display: bridge: Add Cadence MHDP8501   Sandor Yu
• [PATCH v17 3/8] dt-bindings: display: bridge: Add Cadence MHDP8501   Krzysztof Kozlowski
• [PATCH v17 4/8] drm: bridge: Cadence: Add MHDP8501 DP/HDMI driver   Sandor Yu
• [PATCH v17 4/8] drm: bridge: Cadence: Add MHDP8501 DP/HDMI driver   Maxime Ripard
• [PATCH v17 4/8] drm: bridge: Cadence: Add MHDP8501 DP/HDMI driver   Dmitry Baryshkov
• [PATCH v17 4/8] drm: bridge: Cadence: Add MHDP8501 DP/HDMI driver   Sandor Yu
• [PATCH v17 4/8] drm: bridge: Cadence: Add MHDP8501 DP/HDMI driver   Sandor Yu
• [PATCH v17 4/8] drm: bridge: Cadence: Add MHDP8501 DP/HDMI driver   Maxime Ripard
• [PATCH v17 5/8] dt-bindings: phy: Add Freescale iMX8MQ DP and HDMI PHY   Sandor Yu
• [PATCH v17 6/8] phy: freescale: Add DisplayPort/HDMI Combo-PHY driver for i.MX8MQ   Sandor Yu
• [PATCH v17 7/8] arm64: dts: imx8mq: Add DCSS + HDMI/DP display pipeline   Sandor Yu
• [PATCH v17 8/8] arm64: dts: imx8mq: tqma8mq-mba8mx: Enable HDMI support   Sandor Yu
• [PATCH v2 0/5] Add support for DisplayPort on SA8775P platform   Soutrik Mukhopadhyay
• [PATCH v2 0/5] Add support for PCIe3 on x1e80100   Qiang Yu
• [PATCH v2 0/5] Add support for PCIe3 on x1e80100   Krishna Chaitanya Chundru
• [PATCH v2 0/5] Add support for PCIe3 on x1e80100   Qiang Yu
• [PATCH v2 0/5] Add support for PCIe3 on x1e80100   Manivannan Sadhasivam
• [PATCH v2 0/9] phy: sparx5-serdes: add support for lan969x serdes driver   Daniel Machon
• [PATCH v2 1/2] dt-bindings: phy: add NXP PTN3222 eUSB2 to USB2 redriver   Stephan Gerhold
• [PATCH v2 1/2] dt-bindings: phy: rockchip,inno-usb2phy: add rk3576   Frank Wang
• [PATCH v2 1/2] dt-bindings: phy: rockchip,inno-usb2phy: add rk3576   Heiko Stuebner
• [PATCH v2 1/2] dt-bindings: phy: rockchip,inno-usb2phy: add rk3576   Conor Dooley
• [PATCH v2 1/2] dt-bindings: phy: rockchip,inno-usb2phy: add rk3576   Frank Wang
• [PATCH v2 1/2] dt-bindings: phy: rockchip,inno-usb2phy: add rk3576   Frank Wang
• [PATCH v2 1/2] dt-bindings: phy: rockchip,inno-usb2phy: add rk3576   Krzysztof Kozlowski
• [PATCH v2 1/2] dt-bindings: phy: rockchip,inno-usb2phy: add rk3576   Frank Wang
• [PATCH v2 1/3] dt-bindings: phy: jh7110-usb-phy: Add sys-syscon property   Minda Chen
• [PATCH v2 1/3] dt-bindings: phy: jh7110-usb-phy: Add sys-syscon property   Conor Dooley
• [PATCH v2 1/5] dt-bindings: phy: Add eDP PHY compatible for sa8775p   Soutrik Mukhopadhyay
• [PATCH v2 1/5] dt-bindings: phy: Add eDP PHY compatible for sa8775p   Krzysztof Kozlowski
• [PATCH v2 1/5] dt-bindings: phy: Add eDP PHY compatible for sa8775p   Krzysztof Kozlowski
• [PATCH v2 1/5] dt-bindings: phy: Add eDP PHY compatible for sa8775p   Dmitry Baryshkov
• [PATCH v2 1/5] dt-bindings: phy: Add eDP PHY compatible for sa8775p   Konrad Dybcio
• [PATCH v2 1/5] dt-bindings: phy: Add eDP PHY compatible for sa8775p   Krzysztof Kozlowski
• [PATCH v2 1/5] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the X1E80100 QMP PCIe PHY Gen4 x8   Qiang Yu
• [PATCH v2 1/5] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the X1E80100 QMP PCIe PHY Gen4 x8   Manivannan Sadhasivam
• [PATCH v2 1/5] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the X1E80100 QMP PCIe PHY Gen4 x8   Krzysztof Kozlowski
• [PATCH v2 1/5] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the X1E80100 QMP PCIe PHY Gen4 x8   Qiang Yu
• [PATCH v2 1/5] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the X1E80100 QMP PCIe PHY Gen4 x8   Qiang Yu
• [PATCH v2 1/5] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the X1E80100 QMP PCIe PHY Gen4 x8   Konrad Dybcio
• [PATCH v2 1/5] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the X1E80100 QMP PCIe PHY Gen4 x8   Krzysztof Kozlowski
• [PATCH v2 1/9] phy: sparx5-serdes: add support for private match data   Daniel Machon
• [PATCH v2 2/2] phy: add NXP PTN3222 eUSB2 to USB2 redriver   Song Xue
• [PATCH v2 2/2] phy: add NXP PTN3222 eUSB2 to USB2 redriver   Dmitry Baryshkov
• [PATCH v2 2/2] phy: add NXP PTN3222 eUSB2 to USB2 redriver   Stephan Gerhold
• [PATCH v2 2/2] phy: rockchip: inno-usb2: Add usb2 phys support for rk3576   Frank Wang
• [PATCH v2 2/2] phy: rockchip: inno-usb2: Add usb2 phys support for rk3576   Heiko Stuebner
• [PATCH v2 2/2] phy: rockchip: inno-usb2: Add usb2 phys support for rk3576   frawang
• [PATCH v2 2/2] phy: rockchip: inno-usb2: Add usb2 phys support for rk3576   Heiko Stuebner
• [PATCH v2 2/5] dt-bindings: PCI: qcom: Add OPP table for X1E80100   Qiang Yu
• [PATCH v2 2/5] dt-bindings: PCI: qcom: Add OPP table for X1E80100   Dmitry Baryshkov
• [PATCH v2 2/5] dt-bindings: PCI: qcom: Add OPP table for X1E80100   Manivannan Sadhasivam
• [PATCH v2 2/5] dt-bindings: PCI: qcom: Add OPP table for X1E80100   Krzysztof Kozlowski
• [PATCH v2 2/5] dt-bindings: PCI: qcom: Add OPP table for X1E80100   Krzysztof Kozlowski
• [PATCH v2 2/5] phy: qcom: edp: Introduce aux_cfg array for version specific aux settings   Soutrik Mukhopadhyay
• [PATCH v2 2/5] phy: qcom: edp: Introduce aux_cfg array for version specific aux settings   Dmitry Baryshkov
• [PATCH v2 2/5] phy: qcom: edp: Introduce aux_cfg array for version specific aux settings   Konrad Dybcio
• [PATCH v2 2/5] phy: qcom: edp: Introduce aux_cfg array for version specific aux settings   Dmitry Baryshkov
• [PATCH v2 2/5] phy: qcom: edp: Introduce aux_cfg array for version specific aux settings   Soutrik Mukhopadhyay
• [PATCH v2 2/5] phy: qcom: edp: Introduce aux_cfg array for version specific aux settings   Dmitry Baryshkov
• [PATCH v2 2/9] phy: sparx5-serdes: add constants to match data   Daniel Machon
• [PATCH v2 3/5] phy: qcom: edp: Add support for eDP PHY on SA8775P   Soutrik Mukhopadhyay
• [PATCH v2 3/5] phy: qcom: edp: Add support for eDP PHY on SA8775P   Dmitry Baryshkov
• [PATCH v2 3/5] phy: qcom: qmp: Add phy register and clk setting for x1e80100 PCIe3   Qiang Yu
• [PATCH v2 3/5] phy: qcom: qmp: Add phy register and clk setting for x1e80100 PCIe3   Dmitry Baryshkov
• [PATCH v2 3/5] phy: qcom: qmp: Add phy register and clk setting for x1e80100 PCIe3   Konrad Dybcio
• [PATCH v2 3/6] dt-bindings: phy: mxs-usb-phy: add nxp,sim property   Greg KH
• [PATCH v2 3/6] dt-bindings: phy: mxs-usb-phy: add nxp,sim property   Xu Yang
• [PATCH v2 3/9] phy: sparx5-serdes: add constant for the number of CMU's   Daniel Machon
• [PATCH v2 4/5] clk: qcom: gcc-x1e80100: Fix halt_check for pipediv2 clocks   Qiang Yu
• [PATCH v2 4/5] dt-bindings: display: msm: dp-controller: document SA8775P compatible   Soutrik Mukhopadhyay
• [PATCH V2 4/6] PCI: qcom: Add support for IPQ5018   Sricharan Ramabadhran
• [PATCH v2 4/9] phy: sparx5-serdes: add ops to match data   Daniel Machon
• [PATCH v2 5/5] arm64: dts: qcom: x1e80100: Add support for PCIe3 on x1e80100   Qiang Yu
• [PATCH v2 5/5] arm64: dts: qcom: x1e80100: Add support for PCIe3 on x1e80100   Dmitry Baryshkov
• [PATCH v2 5/5] arm64: dts: qcom: x1e80100: Add support for PCIe3 on x1e80100   Manivannan Sadhasivam
• [PATCH v2 5/5] arm64: dts: qcom: x1e80100: Add support for PCIe3 on x1e80100   Qiang Yu
• [PATCH v2 5/5] drm/msm/dp: Add DisplayPort controller for SA8775P   Soutrik Mukhopadhyay
• [PATCH v2 5/5] drm/msm/dp: Add DisplayPort controller for SA8775P   Dmitry Baryshkov
• [PATCH V2 5/6] arm64: dts: qcom: ipq5018: Add PCIe related nodes   Sricharan Ramabadhran
• [PATCH v2 5/9] phy: sparx5-serdes: add function for getting the CMU index   Daniel Machon
• [PATCH v2 6/9] phy: sparx5-serdes: add indirection layer to register macros   Daniel Machon
• [PATCH v2 7/9] phy: sparx5-serdes: add support for branching on chip type   Daniel Machon
• [PATCH v2 8/9] dt-bindings: phy: sparx5: document lan969x   Daniel Machon
• [PATCH v2 8/9] dt-bindings: phy: sparx5: document lan969x   Krzysztof Kozlowski
• [PATCH v2 8/9] dt-bindings: phy: sparx5: document lan969x   Daniel Machon
• [PATCH v2 9/9] phy: lan969x-serdes: add support for lan969x serdes driver   Daniel Machon
• [PATCH v2] dt-bindings: phy: Add QMP UFS PHY comptible for QCS8300   Jingyi Wang
• [PATCH v2] dt-bindings: phy: Add QMP UFS PHY comptible for QCS8300   Krzysztof Kozlowski
• [PATCH v2] dt-bindings: phy: Add QMP UFS PHY comptible for QCS8300   Jingyi Wang
• [PATCH v2] dt-bindings: phy: Add QMP UFS PHY comptible for QCS8300   Krzysztof Kozlowski
• [PATCH v2] dt-bindings: phy: cadence-sierra: Allow PHY types QSGMII and SGMII   Siddharth Vadapalli
• [PATCH v2] phy: mvebu-cp110-utmi: support swapping d+/d- lanes by dts property   Josua Mayer
• [PATCH v2] phy: mvebu-cp110-utmi: support swapping d+/d- lanes by dts property   kernel test robot
• [PATCH v2] phy: renesas: rcar-gen3-usb2: Fix an error handling path in rcar_gen3_phy_usb2_probe()   Christophe JAILLET
• [PATCH v2] phy: renesas: rcar-gen3-usb2: Fix an error handling path in rcar_gen3_phy_usb2_probe()   Biju Das
• [PATCH v2] phy: renesas: rcar-gen3-usb2: Fix an error handling path in rcar_gen3_phy_usb2_probe()   Christophe JAILLET
• [PATCH v2] phy: renesas: rcar-gen3-usb2: Fix an error handling path in rcar_gen3_phy_usb2_probe()   Biju Das
• [PATCH v2] phy: renesas: rcar-gen3-usb2: Fix an error handling path in rcar_gen3_phy_usb2_probe()   claudiu beznea
• [PATCH v2] phy: ti: phy-j721e-wiz: fix usxgmii configuration   Siddharth Vadapalli
• [PATCH v2] phy: ti: phy-j721e-wiz: fix usxgmii configuration   Roger Quadros
• [PATCH v2] phy: ti: phy-j721e-wiz: fix usxgmii configuration   Siddharth Vadapalli
• [PATCH v3 0/1] Fix configuration for on-chip USB 2.0 support   Minda Chen
• [PATCH v3 0/2] phy: qcom: qmp-pcie: Add support for Gen4 4-lane mode for X1E80100   Vinod Koul
• [PATCH v3 0/3] Improve error handling in Rockchip Inno USB 2.0 PHY driver   Dragan Simic
• [PATCH v3 0/5] Add support for DisplayPort on SA8775P platform   Soutrik Mukhopadhyay
• [PATCH v3 0/6] Add support for PCIe3 on x1e80100   Qiang Yu
• [PATCH v3 1/1] phy: starfive: jh7110-usb: Fix link configuration to controller   Minda Chen
• [PATCH v3 1/1] phy: starfive: jh7110-usb: Fix link configuration to controller   Conor Dooley
• [PATCH v3 1/1] phy: starfive: jh7110-usb: Fix link configuration to controller   Minda Chen
• [PATCH v3 1/2] dt-bindings: phy: mxs-usb-phy: add nxp,sim property   Xu Yang
• [PATCH v3 1/2] dt-bindings: phy: rockchip,inno-usb2phy: add rk3576   Frank Wang
• [PATCH v3 1/2] dt-bindings: phy: rockchip,inno-usb2phy: add rk3576   Krzysztof Kozlowski
• [PATCH v3 1/2] dt-bindings: phy: rockchip,inno-usb2phy: add rk3576   Frank Wang
• [PATCH v3 1/2] dt-bindings: phy: rockchip,inno-usb2phy: add rk3576   Krzysztof Kozlowski
• [PATCH v3 1/2] dt-bindings: phy: rockchip,inno-usb2phy: add rk3576   Frank Wang
• [PATCH v3 1/2] dt-bindings: phy: rockchip,inno-usb2phy: add rk3576   Heiko Stuebner
• [PATCH v3 1/2] dt-bindings: phy: rockchip,inno-usb2phy: add rk3576   Krzysztof Kozlowski
• [PATCH v3 1/2] dt-bindings: phy: rockchip,inno-usb2phy: add rk3576   Krzysztof Kozlowski
• [PATCH v3 1/2] dt-bindings: phy: rockchip,inno-usb2phy: add rk3576   Frank Wang
• [PATCH v3 1/2] dt-bindings: phy: rockchip,inno-usb2phy: add rk3576   Frank Wang
• [PATCH v3 1/2] dt-bindings: phy: rockchip,inno-usb2phy: add rk3576   Krzysztof Kozlowski
• [PATCH v3 1/3] phy: phy-rockchip-inno-usb2: Perform trivial code cleanups   Dragan Simic
• [PATCH v3 1/5] dt-bindings: phy: Add eDP PHY compatible for sa8775p   Soutrik Mukhopadhyay
• [PATCH v3 1/5] dt-bindings: phy: Add eDP PHY compatible for sa8775p   Krzysztof Kozlowski
• [PATCH v3 1/6] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the X1E80100 QMP PCIe PHY Gen4 x8   Qiang Yu
• [PATCH v3 1/6] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the X1E80100 QMP PCIe PHY Gen4 x8   Krzysztof Kozlowski
• [PATCH V3 1/6] dt-bindings: phy: qcom,uniphy-pcie: Document PCIe uniphy   Sricharan Ramabadhran
• [PATCH V3 1/6] dt-bindings: phy: qcom,uniphy-pcie: Document PCIe uniphy   Krzysztof Kozlowski
• [PATCH v3 2/2] ARM: dts: imx7ulp: add "nxp,sim" property for usbphy1   Xu Yang
• [PATCH v3 2/2] ARM: dts: imx7ulp: add "nxp,sim" property for usbphy1   Xu Yang
• [PATCH v3 2/2] ARM: dts: imx7ulp: add "nxp,sim" property for usbphy1   Greg KH
• [PATCH v3 2/2] ARM: dts: imx7ulp: add "nxp,sim" property for usbphy1   Xu Yang
• [PATCH v3 2/2] phy: rockchip: inno-usb2: Add usb2 phys support for rk3576   Frank Wang
• [PATCH v3 2/2] phy: rockchip: inno-usb2: Add usb2 phys support for rk3576   Heiko Stuebner
• [PATCH v3 2/2] phy: rockchip: inno-usb2: Add usb2 phys support for rk3576   Frank Wang
• [PATCH v3 2/2] phy: rockchip: inno-usb2: Add usb2 phys support for rk3576   Heiko Stuebner
• [PATCH v3 2/3] phy: phy-rockchip-inno-usb2: Handle failed extcon allocation better   Dragan Simic
• [PATCH v3 2/5] phy: qcom: edp: Introduce aux_cfg array for version specific aux settings   Soutrik Mukhopadhyay
• [PATCH v3 2/5] phy: qcom: edp: Introduce aux_cfg array for version specific aux settings   Dmitry Baryshkov
• [PATCH v3 2/6] dt-bindings: PCI: qcom: Add OPP table for X1E80100   Qiang Yu
• [PATCH v3 2/6] dt-bindings: PCI: qcom: Add OPP table for X1E80100   Dmitry Baryshkov
• [PATCH v3 3/3] phy: phy-rockchip-inno-usb2: Use dev_err_probe() in the probe path   Dragan Simic
• [PATCH v3 3/3] phy: phy-rockchip-inno-usb2: Use dev_err_probe() in the probe path   Heiko Stübner
• [PATCH v3 3/5] phy: fsl-imx8mq-usb: add tca function driver for imx95   Xu Yang
• [PATCH v3 3/5] phy: qcom: edp: Add support for eDP PHY on SA8775P   Soutrik Mukhopadhyay
• [PATCH v3 3/5] phy: qcom: edp: Add support for eDP PHY on SA8775P   Dmitry Baryshkov
• [PATCH V3 3/6] phy: qcom: Introduce PCIe UNIPHY 28LP driver   Konrad Dybcio
• [PATCH v3 3/6] phy: qcom: qmp: Add phy register and clk setting for x1e80100 PCIe3   Qiang Yu
• [PATCH v3 4/5] arm64: dts: imx95: add usb3 related nodes   Shawn Guo
• [PATCH v3 4/5] arm64: dts: imx95: add usb3 related nodes   Xu Yang
• [PATCH v3 4/5] dt-bindings: display: msm: dp-controller: document SA8775P compatible   Soutrik Mukhopadhyay
• [PATCH v3 4/5] dt-bindings: display: msm: dp-controller: document SA8775P compatible   Krzysztof Kozlowski
• [PATCH v3 4/6] clk: qcom: gcc-x1e80100: Fix halt_check for pipediv2 clocks   Qiang Yu
• [PATCH v3 5/5] drm/msm/dp: Add DisplayPort controller for SA8775P   Soutrik Mukhopadhyay
• [PATCH v3 5/5] drm/msm/dp: Add DisplayPort controller for SA8775P   Dmitry Baryshkov
• [PATCH v3 5/6] PCI: qcom: Add new cfg and ops without config_sid callback for X1E80100   Qiang Yu
• [PATCH v3 5/6] PCI: qcom: Add new cfg and ops without config_sid callback for X1E80100   Manivannan Sadhasivam
• [PATCH v3 6/6] arm64: dts: qcom: x1e80100: Add support for PCIe3 on x1e80100   Qiang Yu
• [PATCH v3] dt-bindings: phy: Add QMP UFS PHY compatible for QCS8300   Jingyi Wang
• [PATCH v3] dt-bindings: phy: Add QMP UFS PHY compatible for QCS8300   Krzysztof Kozlowski
• [PATCH v3] phy: mvebu-cp110-utmi: support swapping d+/d- lanes by dts property   Josua Mayer
• [PATCH v3] phy: renesas: rcar-gen3-usb2: Fix an error handling path in rcar_gen3_phy_usb2_probe()   Christophe JAILLET
• [PATCH v3] phy: renesas: rcar-gen3-usb2: Fix an error handling path in rcar_gen3_phy_usb2_probe()   Christophe JAILLET
• [PATCH v4 0/1] dt-bindings: phy: ti,tcan104x-can: Document Microchip   Ilya Orazov
• [PATCH V4 0/5] phy: freescale: fsl-samsung-hdmi: Expand phy clock options   Adam Ford
• [PATCH v4 0/6] Add support for PCIe3 on x1e80100   Qiang Yu
• [PATCH v4 04/18] mux: add mux_chip_resume() function   Peter Rosin
• [PATCH v4 1/1] dt-bindings: phy: ti,tcan104x-can: Document Microchip ATA6561   Ilya Orazov
• [PATCH v4 1/3] phy: rockchip: inno-usb2: convert clock management to bulk   Frank Wang
• [PATCH v4 1/3] phy: rockchip: inno-usb2: convert clock management to bulk   Krzysztof Kozlowski
• [PATCH v4 1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy"   Xu Yang
• [PATCH V4 1/5] phy: freescale: fsl-samsung-hdmi: Replace register defines with macro   Adam Ford
• [PATCH V4 1/5] phy: freescale: fsl-samsung-hdmi: Replace register defines with macro   Marco Felsch
• [PATCH v4 1/6] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the X1E80100 QMP PCIe PHY Gen4 x8   Qiang Yu
• [PATCH v4 2/3] dt-bindings: phy: rockchip,inno-usb2phy: add rk3576   Frank Wang
• [PATCH v4 2/3] dt-bindings: phy: rockchip,inno-usb2phy: add rk3576   Krzysztof Kozlowski
• [PATCH v4 2/5] dt-bindings: usb: dwc3-imx8mp: add compatible string for imx95   Xu Yang
• [PATCH V4 2/5] phy: freescale: fsl-samsung-hdmi: Simplify REG21_PMS_S_MASK lookup   Adam Ford
• [PATCH V4 2/5] phy: freescale: fsl-samsung-hdmi: Simplify REG21_PMS_S_MASK lookup   Marco Felsch
• [PATCH v4 2/5] phy: stm32: Add support for STM32MP25 COMBOPHY.   Christian Bruel
• [PATCH v4 2/6] dt-bindings: PCI: qcom: Move OPP table to qcom,pcie-common.yaml   Qiang Yu
• [PATCH v4 2/6] dt-bindings: PCI: qcom: Move OPP table to qcom,pcie-common.yaml   Manivannan Sadhasivam
• [PATCH v4 2/6] dt-bindings: PCI: qcom: Move OPP table to qcom,pcie-common.yaml   Krzysztof Kozlowski
• [PATCH v4 3/3] phy: rockchip: inno-usb2: Add usb2 phys support for rk3576   Frank Wang
• [PATCH V4 3/5] phy: freescale: fsl-samsung-hdmi: Support dynamic integer   Adam Ford
• [PATCH V4 3/5] phy: freescale: fsl-samsung-hdmi: Support dynamic integer   Dominique Martinet
• [PATCH V4 3/5] phy: freescale: fsl-samsung-hdmi: Support dynamic integer   Adam Ford
• [PATCH v4 3/5] phy: fsl-imx8mq-usb: add tca function driver for imx95   Xu Yang
• [PATCH v4 3/6] phy: qcom: qmp: Add phy register and clk setting for x1e80100 PCIe3   Qiang Yu
• [PATCH v4 3/6] phy: qcom: qmp: Add phy register and clk setting for x1e80100 PCIe3   Johan Hovold
• [PATCH v4 3/6] phy: qcom: qmp: Add phy register and clk setting for x1e80100 PCIe3   Qiang Yu
• [PATCH v4 3/6] phy: qcom: qmp: Add phy register and clk setting for x1e80100 PCIe3   Johan Hovold
• [PATCH v4 4/5] arm64: dts: imx95: add usb3 related nodes   Xu Yang
• [PATCH V4 4/5] phy: freescale: fsl-samsung-hdmi: Use closest divider   Adam Ford
• [PATCH V4 4/5] phy: freescale: fsl-samsung-hdmi: Use closest divider   Dominique Martinet
• [PATCH v4 4/6] clk: qcom: gcc-x1e80100: Fix halt_check for pipediv2 clocks   Qiang Yu
• [PATCH v4 4/6] clk: qcom: gcc-x1e80100: Fix halt_check for pipediv2 clocks   Johan Hovold
• [PATCH v4 4/6] clk: qcom: gcc-x1e80100: Fix halt_check for pipediv2 clocks   Qiang Yu
• [PATCH v4 5/5] arm64: dts: imx95-19x19-evk: add typec nodes and enable usb3 node   Xu Yang
• [PATCH v4 5/5] arm64: dts: imx95-19x19-evk: add typec nodes and enable usb3 node   Frank Li
• [PATCH v4 5/5] arm64: dts: imx95-19x19-evk: add typec nodes and enable usb3 node   Xu Yang
• [PATCH V4 5/5] phy: freescale: fsl-samsung-hdmi: Remove unnecessary LUT entries   Adam Ford
• [PATCH v4 5/6] PCI: qcom: Add support for X1E80100 SoC   Qiang Yu
• [PATCH v4 5/6] PCI: qcom: Add support for X1E80100 SoC   Manivannan Sadhasivam
• [PATCH v4 5/6] PCI: qcom: Add support for X1E80100 SoC   Johan Hovold
• [PATCH v4 5/6] PCI: qcom: Add support for X1E80100 SoC   Qiang Yu
• [PATCH v4 5/6] PCI: qcom: Add support for X1E80100 SoC   Qiang Yu
• [PATCH v4 5/6] PCI: qcom: Add support for X1E80100 SoC   Manivannan Sadhasivam
• [PATCH v4 5/6] PCI: qcom: Add support for X1E80100 SoC   Qiang Yu
• [PATCH v4 5/6] PCI: qcom: Add support for X1E80100 SoC   Qiang Yu
• [PATCH v4 5/6] PCI: qcom: Add support for X1E80100 SoC   Manivannan Sadhasivam
• [PATCH v4 6/6] arm64: dts: qcom: x1e80100: Add support for PCIe3 on x1e80100   Qiang Yu
• [PATCH v4 6/6] arm64: dts: qcom: x1e80100: Add support for PCIe3 on x1e80100   Manivannan Sadhasivam
• [PATCH v4 6/6] arm64: dts: qcom: x1e80100: Add support for PCIe3 on x1e80100   Konrad Dybcio
• [PATCH v4 6/6] arm64: dts: qcom: x1e80100: Add support for PCIe3 on x1e80100   Johan Hovold
• [PATCH v4 6/6] arm64: dts: qcom: x1e80100: Add support for PCIe3 on x1e80100   Qiang Yu
• [PATCH v4 6/6] arm64: dts: qcom: x1e80100: Add support for PCIe3 on x1e80100   Qiang Yu
• [PATCH v4 6/6] arm64: dts: qcom: x1e80100: Add support for PCIe3 on x1e80100   Manivannan Sadhasivam
• [PATCH v4 6/6] arm64: dts: qcom: x1e80100: Add support for PCIe3 on x1e80100   Manivannan Sadhasivam
• [PATCH v4 6/6] arm64: dts: qcom: x1e80100: Add support for PCIe3 on x1e80100   Konrad Dybcio
• [PATCH v4 6/6] arm64: dts: qcom: x1e80100: Add support for PCIe3 on x1e80100   Konrad Dybcio
• [PATCH v4 6/6] arm64: dts: qcom: x1e80100: Add support for PCIe3 on x1e80100   Manivannan Sadhasivam
• [PATCH v4 6/6] arm64: dts: qcom: x1e80100: Add support for PCIe3 on x1e80100   Qiang Yu
• [PATCH v4 6/6] arm64: dts: qcom: x1e80100: Add support for PCIe3 on x1e80100   Manivannan Sadhasivam
• [PATCH v4] phy: renesas: rcar-gen3-usb2: Fix an error handling path in rcar_gen3_phy_usb2_probe()   Christophe JAILLET
• [PATCH v4] phy: renesas: rcar-gen3-usb2: Fix an error handling path in rcar_gen3_phy_usb2_probe()   Biju Das
• [PATCH v5 0/5] Add STM32MP25 USB3/PCIE COMBOPHY driver   Christian Bruel
• [PATCH V5 0/5] phy: freescale: fsl-samsung-hdmi: Expand phy clock options   Adam Ford
• [PATCH v5 1/5] dt-bindings: phy: Add STM32MP25 COMBOPHY bindings   Christian Bruel
• [PATCH v5 1/5] dt-bindings: phy: Add STM32MP25 COMBOPHY bindings   Rob Herring (Arm)
• [PATCH v5 1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy"   Xu Yang
• [PATCH V5 1/5] phy: freescale: fsl-samsung-hdmi: Replace register defines with macro   Adam Ford
• [PATCH V5 1/5] phy: freescale: fsl-samsung-hdmi: Replace register defines with macro   Frieder Schrempf
• [PATCH v5 2/5] dt-bindings: usb: dwc3-imx8mp: add compatible string for imx95   Xu Yang
• [PATCH V5 2/5] phy: freescale: fsl-samsung-hdmi: Simplify REG21_PMS_S_MASK lookup   Adam Ford
• [PATCH V5 2/5] phy: freescale: fsl-samsung-hdmi: Simplify REG21_PMS_S_MASK lookup   Frieder Schrempf
• [PATCH v5 2/5] phy: stm32: Add support for STM32MP25 COMBOPHY.   Christian Bruel
• [PATCH v5 2/5] phy: stm32: Add support for STM32MP25 COMBOPHY.   kernel test robot
• [PATCH v5 2/5] phy: stm32: Add support for STM32MP25 COMBOPHY.   Philipp Zabel
• [PATCH v5 2/5] phy: stm32: Add support for STM32MP25 COMBOPHY.   Christian Bruel
• [PATCH v5 3/5] MAINTAINERS: add entry for ST STM32MP25 COMBOPHY driver   Christian Bruel
• [PATCH V5 3/5] phy: freescale: fsl-samsung-hdmi: Support dynamic integer   Adam Ford
• [PATCH V5 3/5] phy: freescale: fsl-samsung-hdmi: Support dynamic integer   Frieder Schrempf
• [PATCH V5 3/5] phy: freescale: fsl-samsung-hdmi: Support dynamic integer   Adam Ford
• [PATCH V5 3/5] phy: freescale: fsl-samsung-hdmi: Support dynamic integer   Frieder Schrempf
• [PATCH V5 3/5] phy: freescale: fsl-samsung-hdmi: Support dynamic integer   Adam Ford
• [PATCH V5 3/5] phy: freescale: fsl-samsung-hdmi: Support dynamic integer   Frieder Schrempf
• [PATCH v5 3/5] phy: fsl-imx8mq-usb: add tca function driver for imx95   Xu Yang
• [PATCH v5 4/5] arm64: dts: imx95: add usb3 related nodes   Xu Yang
• [PATCH v5 4/5] arm64: dts: st: Add combophy node on stm32mp251   Christian Bruel
• [PATCH V5 4/5] phy: freescale: fsl-samsung-hdmi: Use closest divider   Adam Ford
• [PATCH V5 4/5] phy: freescale: fsl-samsung-hdmi: Use closest divider   Frieder Schrempf
• [PATCH V5 4/5] phy: freescale: fsl-samsung-hdmi: Use closest divider   Frieder Schrempf
• [PATCH V5 4/5] phy: freescale: fsl-samsung-hdmi: Use closest divider   Adam Ford
• [PATCH v5 4/6] phy: rockchip-pcie: Simplify error handling with dev_err_probe()   Anand Moon
• [PATCH v5 5/5] arm64: dts: imx95-19x19-evk: add typec nodes and enable usb3 node   Xu Yang
• [PATCH v5 5/5] arm64: dts: st: Enable COMBOPHY on the stm32mp257f-ev1 board   Christian Bruel
• [PATCH V5 5/5] phy: freescale: fsl-samsung-hdmi: Remove unnecessary LUT entries   Adam Ford
• [PATCH V5 5/5] phy: freescale: fsl-samsung-hdmi: Remove unnecessary LUT entries   Frieder Schrempf
• [PATCH V5 5/5] phy: freescale: fsl-samsung-hdmi: Remove unnecessary LUT entries   Adam Ford
• [PATCH v5 5/6] phy: rockchip-pcie: Change to use devm_clk_get_enabled() helper   Anand Moon
• [PATCH v5 6/6] phy: rockchip-pcie: Use regmap_read_poll_timeout for PCIe reference clk PLL status   Anand Moon
• [PATCH v6 0/5] Add STM32MP25 USB3/PCIE COMBOPHY driver   Christian Bruel
• [PATCH V6 0/5] phy: freescale: fsl-samsung-hdmi: Expand phy clock options   Adam Ford
• [PATCH V6 0/5] phy: freescale: fsl-samsung-hdmi: Expand phy clock options   Frieder Schrempf
• [PATCH V6 0/5] phy: freescale: fsl-samsung-hdmi: Expand phy clock options   Adam Ford
• [PATCH V6 0/5] phy: freescale: fsl-samsung-hdmi: Expand phy clock options   Frieder Schrempf
• [PATCH v6 1/5] dt-bindings: phy: Add STM32MP25 COMBOPHY bindings   Christian Bruel
• [PATCH V6 1/5] phy: freescale: fsl-samsung-hdmi: Replace register defines with macro   Adam Ford
• [PATCH V6 2/5] phy: freescale: fsl-samsung-hdmi: Simplify REG21_PMS_S_MASK lookup   Adam Ford
• [PATCH v6 2/5] phy: stm32: Add support for STM32MP25 COMBOPHY.   Christian Bruel
• [PATCH v6 3/5] MAINTAINERS: add entry for ST STM32MP25 COMBOPHY driver   Christian Bruel
• [PATCH V6 3/5] phy: freescale: fsl-samsung-hdmi: Support dynamic integer   Adam Ford
• [PATCH v6 4/5] arm64: dts: st: Add combophy node on stm32mp251   Christian Bruel
• [PATCH V6 4/5] phy: freescale: fsl-samsung-hdmi: Use closest divider   Adam Ford
• [PATCH V6 4/5] phy: freescale: fsl-samsung-hdmi: Use closest divider   Frieder Schrempf
• [PATCH V6 4/5] phy: freescale: fsl-samsung-hdmi: Use closest divider   Dominique Martinet
• [PATCH V6 4/5] phy: freescale: fsl-samsung-hdmi: Use closest divider   Adam Ford
• [PATCH V6 4/5] phy: freescale: fsl-samsung-hdmi: Use closest divider   Dominique Martinet
• [PATCH V6 4/5] phy: freescale: fsl-samsung-hdmi: Use closest divider   Frieder Schrempf
• [PATCH V6 4/5] phy: freescale: fsl-samsung-hdmi: Use closest divider   Dominique Martinet
• [PATCH V6 4/5] phy: freescale: fsl-samsung-hdmi: Use closest divider   Adam Ford
• [PATCH v6 5/5] arm64: dts: st: Enable COMBOPHY on the stm32mp257f-ev1 board   Christian Bruel
• [PATCH V6 5/5] phy: freescale: fsl-samsung-hdmi: Remove unnecessary LUT entries   Adam Ford
• [PATCH v7 0/5] Add STM32MP25 USB3/PCIE COMBOPHY driver   Christian Bruel
• [PATCH V7 0/5] phy: freescale: fsl-samsung-hdmi: Expand phy clock options   Adam Ford
• [PATCH v7 0/6] HDMI TX support in msm8998   Dmitry Baryshkov
• [PATCH v7 0/6] HDMI TX support in msm8998   Marc Gonzalez
• [PATCH v7 1/5] dt-bindings: phy: Add STM32MP25 COMBOPHY bindings   Christian Bruel
• [PATCH V7 1/5] phy: freescale: fsl-samsung-hdmi: Replace register defines with macro   Adam Ford
• [PATCH V7 1/5] phy: freescale: fsl-samsung-hdmi: Replace register defines with macro   Dominique Martinet
• [PATCH V7 2/5] phy: freescale: fsl-samsung-hdmi: Simplify REG21_PMS_S_MASK lookup   Adam Ford
• [PATCH V7 2/5] phy: freescale: fsl-samsung-hdmi: Simplify REG21_PMS_S_MASK lookup   Dominique Martinet
• [PATCH v7 2/5] phy: stm32: Add support for STM32MP25 COMBOPHY.   Christian Bruel
• [PATCH v7 3/5] MAINTAINERS: add entry for ST STM32MP25 COMBOPHY driver   Christian Bruel
• [PATCH V7 3/5] xphy: freescale: fsl-samsung-hdmi: Support dynamic integer   Adam Ford
• [PATCH V7 3/5] xphy: freescale: fsl-samsung-hdmi: Support dynamic integer   Dominique Martinet
• [PATCH V7 3/5] xphy: freescale: fsl-samsung-hdmi: Support dynamic integer   Frieder Schrempf
• [PATCH v7 4/5] arm64: dts: st: Add combophy node on stm32mp251   Christian Bruel
• [PATCH V7 4/5] phy: freescale: fsl-samsung-hdmi: Use closest divider   Adam Ford
• [PATCH V7 4/5] phy: freescale: fsl-samsung-hdmi: Use closest divider   Dominique Martinet
• [PATCH V7 4/5] phy: freescale: fsl-samsung-hdmi: Use closest divider   Frieder Schrempf
• [PATCH V7 5/5] phy: freescale: fsl-samsung-hdmi: Remove unnecessary LUT entries   Adam Ford
• [PATCH V7 5/5] phy: freescale: fsl-samsung-hdmi: Remove unnecessary LUT entries   Dominique Martinet
• [PATCH v8 0/5] Add STM32MP25 USB3/PCIE COMBOPHY driver   Christian Bruel
• [PATCH V8 0/5] phy: freescale: fsl-samsung-hdmi: Expand phy clock options   Adam Ford
• [PATCH v8 1/5] dt-bindings: phy: Add STM32MP25 COMBOPHY bindings   Christian Bruel
• [PATCH V8 1/5] phy: freescale: fsl-samsung-hdmi: Replace register defines with macro   Adam Ford
• [PATCH V8 2/5] phy: freescale: fsl-samsung-hdmi: Simplify REG21_PMS_S_MASK lookup   Adam Ford
• [PATCH v8 2/5] phy: stm32: Add support for STM32MP25 COMBOPHY.   Christian Bruel
• [PATCH v8 2/5] phy: stm32: Add support for STM32MP25 COMBOPHY.   kernel test robot
• [PATCH v8 3/5] MAINTAINERS: add entry for ST STM32MP25 COMBOPHY driver   Christian Bruel
• [PATCH V8 3/5] phy: freescale: fsl-samsung-hdmi: Support dynamic integer   Adam Ford
• [PATCH V8 3/5] phy: freescale: fsl-samsung-hdmi: Support dynamic integer   Frieder Schrempf
• [PATCH v8 4/5] arm64: dts: st: Add combophy node on stm32mp251   Christian Bruel
• [PATCH V8 4/5] phy: freescale: fsl-samsung-hdmi: Use closest divider   Adam Ford
• [PATCH V8 4/5] phy: freescale: fsl-samsung-hdmi: Use closest divider   Frieder Schrempf
• [PATCH v8 5/5] arm64: dts: st: Enable COMBOPHY on the stm32mp257f-ev1 board   Christian Bruel
• [PATCH V8 5/5] phy: freescale: fsl-samsung-hdmi: Remove unnecessary LUT entries   Adam Ford
• [PATCH v9 0/5] Add STM32MP25 USB3/PCIE COMBOPHY driver   Christian Bruel
• [PATCH v9 1/5] dt-bindings: phy: Add STM32MP25 COMBOPHY bindings   Christian Bruel
• [PATCH v9 2/5] phy: stm32: Add support for STM32MP25 COMBOPHY.   Christian Bruel
• [PATCH v9 3/5] MAINTAINERS: add entry for ST STM32MP25 COMBOPHY driver   Christian Bruel
• [PATCH v9 4/5] arm64: dts: st: Add combophy node on stm32mp251   Christian Bruel
• [PATCH v9 5/5] arm64: dts: st: Enable COMBOPHY on the stm32mp257f-ev1 board   Christian Bruel
• [RESEND PATCH 1/2] dt-bindings: phy: rockchip,inno-usb2phy: add rk3576   Frank Wang
• [RESEND PATCH 1/2] dt-bindings: phy: rockchip,inno-usb2phy: add rk3576   Krzysztof Kozlowski
• [RESEND PATCH 1/2] dt-bindings: phy: rockchip,inno-usb2phy: add rk3576   Frank Wang
• [RESEND PATCH 1/2] dt-bindings: phy: rockchip,inno-usb2phy: add rk3576   Krzysztof Kozlowski
• [RESEND PATCH 1/2] dt-bindings: phy: rockchip,inno-usb2phy: add rk3576   Krzysztof Kozlowski
• [RESEND PATCH 2/2] phy: rockchip: inno-usb2: Add usb2 phys support for rk3576   Frank Wang
• [RESEND PATCH v4 0/1] dt-bindings: phy: ti,tcan104x-can: Document Microchip ATA6561   Ilya Orazov
• [RESEND PATCH v4 1/1] dt-bindings: phy: ti,tcan104x-can: Document Microchip ATA6561   Ilya Orazov
• [RFC V3 3/3] phy: freescale: fsl-samsung-hdmi: Support dynamic integer   Dominique Martinet
• [RFC V3 3/3] phy: freescale: fsl-samsung-hdmi: Support dynamic integer   Adam Ford
• [RFC V3 3/3] phy: freescale: fsl-samsung-hdmi: Support dynamic integer   Dominique Martinet
• [RFC V3 3/3] phy: freescale: fsl-samsung-hdmi: Support dynamic integer   Adam Ford
• Bouncing maintainer: Shengyang Chen   Konstantin Ryabitsev
• Bouncing maintainer: Shengyang Chen   Bugspray Bot
• Bouncing maintainer: Shengyang Chen   Keith Zhao

Last message date: Mon Sep 30 20:10:27 PDT 2024
Archived on: Mon Sep 30 20:54:10 PDT 2024

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...