[PATCH v3 1/2] dt-bindings: phy: rockchip,inno-usb2phy: add rk3576

[Frank Wang]

Hi Krzysztof,

On 2024/9/27 17:52, Krzysztof Kozlowski wrote:
> On 27/09/2024 09:59, Frank Wang wrote:
>>>> -  clocks:
>>>> -    maxItems: 1
>>>> +  clocks: true
>>>>
>>>> -  clock-names:
>>>> -    const: phyclk
>>>> +  clock-names: true
>>> For the third time, read the code I gave you. Do you see something like
>>> this there? Why doing all the time something different than existing code?
>> Refer to the link you sent me that I must add minItems property for
>> clocks, just like the below codes:
>>
>> @@ -35,7 +35,8 @@ properties:
>>        const: 0
>>
>>      clocks:
>> -    maxItems: 1
>> +    minItems: 1
>> +    maxItems: 3
> Yes, for all variable properties, so also names.
>
>> That can pass dt_binding and dtb checking, however, "clocks" is the
>> optional property for some old Rockchip PHYs,  I am not sure is it right
>> to force set  minItems as 1 .
>> If just keep maxItems, the dt_binding checking is failure.
> Please specify the question you want to ask.
>

Q1: The "clocks" is an optional property for some old Rockchip PHYs, so 
set "minItems: 1" likes the below, is this a suitable setting?

    clocks:
-    maxItems: 1
+    minItems: 1
+    maxItems: 3Q2: Do you want me to amend the code to like this? 
clocks: minItems: 1 maxItems: 3 clock-names: minItems: 1 maxItems: 3 
allOf: [...] - if: properties: compatible: contains: enum: - 
rockchip,px30-usb2phy - rockchip,rk3128-usb2phy - 
rockchip,rk3228-usb2phy - rockchip,rk3308-usb2phy - 
rockchip,rk3328-usb2phy - rockchip,rk3366-usb2phy - 
rockchip,rk3399-usb2phy - rockchip,rk3568-usb2phy - 
rockchip,rk3588-usb2phy - rockchip,rv1108-usb2phy then: properties: 
clocks: maxItems: 1 clock-names: const: phyclk - if: properties: 
compatible: contains: enum: - rockchip,rk3576-usb2phy then: properties: 
clocks: minItems: 3 maxItems: 3 clock-names: items: - const: phyclk - 
const: aclk - const: aclk_slv


Best regards,
Frank

> Best regards,
> Krzysztof
>