[PATCH v3 2/3] phy: phy-rockchip-inno-usb2: Handle failed extcon allocation better

[Dragan Simic]

Return the actual error code upon failure to allocate extcon device, instead
of hardcoding -ENOMEM.  Use dev_err_probe() to also log appropriate messages,
which is fine because the containing function is used in the probe path.

Helped-by: Heiko Stubner <heiko at sntech.de>
Reviewed-by: Heiko Stuebner <heiko at sntech.de>
Signed-off-by: Dragan Simic <dsimic at manjaro.org>
---
 drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index 03b772200fed..cf6b67dd9f10 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -435,7 +435,8 @@ static int rockchip_usb2phy_extcon_register(struct rockchip_usb2phy *rphy)
 						rockchip_usb2phy_extcon_cable);
 
 		if (IS_ERR(edev))
-			return -ENOMEM;
+			return dev_err_probe(rphy->dev, PTR_ERR(edev),
+					     "failed to allocate extcon device\n");
 
 		ret = devm_extcon_dev_register(rphy->dev, edev);
 		if (ret) {