[PATCH v3 2/2] phy: rockchip: inno-usb2: Add usb2 phys support for rk3576
Heiko Stuebner
heiko at sntech.de
Thu Sep 26 03:48:36 PDT 2024
Am Donnerstag, 26. September 2024, 12:32:23 CEST schrieb Frank Wang:
> From: William Wu <william.wu at rock-chips.com>
>
> The RK3576 SoC has two independent USB2.0 PHYs, and each PHY has
> one port.
>
> This change also converts the clock management from single to bulk
> as some Rockchip SoCs (e.g RK3576) have more than one clock.
>
> Signed-off-by: William Wu <william.wu at rock-chips.com>
> Signed-off-by: Frank Wang <frank.wang at rock-chips.com>
> ---
> Changelog:
> v3:
> - amend the commit log adds clocks converting.
> - retrieve the clock by "clks.id" in *_clk480m_register() function.
>
> v2:
> - no changes.
> v1:
> - https://patchwork.kernel.org/project/linux-phy/patch/20240923025326.10467-2-frank.wang@rock-chips.com/
>
> drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 139 +++++++++++++++++-
> 1 file changed, 131 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
> index 4f71373ae6e1..642c7857c5ae 100644
> --- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
> +++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
> @@ -229,9 +229,10 @@ struct rockchip_usb2phy_port {
> * @dev: pointer to device.
> * @grf: General Register Files regmap.
> * @usbgrf: USB General Register Files regmap.
> - * @clk: clock struct of phy input clk.
> + * @clks: array of phy input clocks.
> * @clk480m: clock struct of phy output clk.
> * @clk480m_hw: clock struct of phy output clk management.
> + * @num_clks: number of phy input clocks.
> * @phy_reset: phy reset control.
> * @chg_state: states involved in USB charger detection.
> * @chg_type: USB charger types.
> @@ -246,9 +247,10 @@ struct rockchip_usb2phy {
> struct device *dev;
> struct regmap *grf;
> struct regmap *usbgrf;
> - struct clk *clk;
> + struct clk_bulk_data *clks;
> struct clk *clk480m;
> struct clk_hw clk480m_hw;
> + int num_clks;
> struct reset_control *phy_reset;
> enum usb_chg_state chg_state;
> enum power_supply_type chg_type;
> @@ -376,7 +378,9 @@ rockchip_usb2phy_clk480m_register(struct rockchip_usb2phy *rphy)
> {
> struct device_node *node = rphy->dev->of_node;
> struct clk_init_data init;
> + struct clk *refclk = NULL;
> const char *clk_name;
> + int i;
> int ret = 0;
>
> init.flags = 0;
> @@ -386,8 +390,15 @@ rockchip_usb2phy_clk480m_register(struct rockchip_usb2phy *rphy)
> /* optional override of the clockname */
> of_property_read_string(node, "clock-output-names", &init.name);
>
> - if (rphy->clk) {
> - clk_name = __clk_get_name(rphy->clk);
> + for (i = 0; i < rphy->num_clks; i++) {
> + if (!strncmp(rphy->clks[i].id, "phyclk", 6)) {
> + refclk = rphy->clks[i].clk;
> + break;
> + }
> + }
> +
> + if (!IS_ERR(refclk)) {
> + clk_name = __clk_get_name(refclk);
> init.parent_names = &clk_name;
> init.num_parents = 1;
> } else {
> @@ -1406,22 +1417,29 @@ static int rockchip_usb2phy_probe(struct platform_device *pdev)
> if (IS_ERR(rphy->phy_reset))
> return PTR_ERR(rphy->phy_reset);
>
> - rphy->clk = devm_clk_get_optional_enabled(dev, "phyclk");
> - if (IS_ERR(rphy->clk)) {
> - return dev_err_probe(&pdev->dev, PTR_ERR(rphy->clk),
> + ret = devm_clk_bulk_get_all(dev, &rphy->clks);
> + if (ret == -EPROBE_DEFER) {
> + return dev_err_probe(&pdev->dev, -EPROBE_DEFER,
> "failed to get phyclk\n");
> }
>
> + /* Clocks are optional */
> + rphy->num_clks = ret < 0 ? 0 : ret;
> +
> ret = rockchip_usb2phy_clk480m_register(rphy);
> if (ret) {
> dev_err(dev, "failed to register 480m output clock\n");
> return ret;
> }
>
> + ret = clk_bulk_prepare_enable(rphy->num_clks, rphy->clks);
> + if (ret)
> + return ret;
> +
Do you actually need that separate enable step?
There exists devm_clk_bulk_get_all_enable()
https://elixir.bootlin.com/linux/v6.11/source/include/linux/clk.h#L511
which you could use above. Especially as otherwise you'd need a remove
callback to disable the clock on driver unbind?
> if (rphy->phy_cfg->phy_tuning) {
> ret = rphy->phy_cfg->phy_tuning(rphy);
> if (ret)
> - return ret;
> + goto disable_clks;
> }
>
> index = 0;
> @@ -1484,6 +1502,8 @@ static int rockchip_usb2phy_probe(struct platform_device *pdev)
>
> put_child:
> of_node_put(child_np);
> +disable_clks:
> + clk_bulk_disable_unprepare(rphy->num_clks, rphy->clks);
> return ret;
> }
>
> @@ -1495,6 +1515,30 @@ static int rk3128_usb2phy_tuning(struct rockchip_usb2phy *rphy)
> BIT(2) << BIT_WRITEABLE_SHIFT | 0);
> }
I still maintain, that this maybe should be two separate patches.
And you even seem to have nice "cut-here" in it ;-)
The code above converts the driver to use clk_bulk to handle
multiple clocks for controller variants needing it.
And the code below adds the rk3576-specific data to the driver.
> +static int rk3576_usb2phy_tuning(struct rockchip_usb2phy *rphy)
> +{
> + int ret;
> + u32 reg = rphy->phy_cfg->reg;
> +
> + /* Deassert SIDDQ to power on analog block */
> + ret = regmap_write(rphy->grf, reg + 0x0010, GENMASK(29, 29) | 0x0000);
> + if (ret)
> + return ret;
> +
> + /* Do reset after exit IDDQ mode */
> + ret = rockchip_usb2phy_reset(rphy);
> + if (ret)
> + return ret;
> +
> + /* HS DC Voltage Level Adjustment 4'b1001 : +5.89% */
> + ret |= regmap_write(rphy->grf, reg + 0x000c, GENMASK(27, 24) | 0x0900);
> +
> + /* HS Transmitter Pre-Emphasis Current Control 2'b10 : 2x */
> + ret |= regmap_write(rphy->grf, reg + 0x0010, GENMASK(20, 19) | 0x0010);
> +
> + return ret;
> +}
> +
> static int rk3588_usb2phy_tuning(struct rockchip_usb2phy *rphy)
> {
> int ret;
> @@ -1923,6 +1967,84 @@ static const struct rockchip_usb2phy_cfg rk3568_phy_cfgs[] = {
> { /* sentinel */ }
> };
>
> +static const struct rockchip_usb2phy_cfg rk3576_phy_cfgs[] = {
> + {
> + .reg = 0x0,
> + .num_ports = 1,
> + .phy_tuning = rk3576_usb2phy_tuning,
> + .clkout_ctl = { 0x0008, 0, 0, 1, 0 },
> + .port_cfgs = {
> + [USB2PHY_PORT_OTG] = {
> + .phy_sus = { 0x0000, 8, 0, 0, 0x1d1 },
> + .bvalid_det_en = { 0x00c0, 1, 1, 0, 1 },
> + .bvalid_det_st = { 0x00c4, 1, 1, 0, 1 },
> + .bvalid_det_clr = { 0x00c8, 1, 1, 0, 1 },
> + .ls_det_en = { 0x00c0, 0, 0, 0, 1 },
> + .ls_det_st = { 0x00c4, 0, 0, 0, 1 },
> + .ls_det_clr = { 0x00c8, 0, 0, 0, 1 },
> + .disfall_en = { 0x00c0, 6, 6, 0, 1 },
> + .disfall_st = { 0x00c4, 6, 6, 0, 1 },
> + .disfall_clr = { 0x00c8, 6, 6, 0, 1 },
> + .disrise_en = { 0x00c0, 5, 5, 0, 1 },
> + .disrise_st = { 0x00c4, 5, 5, 0, 1 },
> + .disrise_clr = { 0x00c8, 5, 5, 0, 1 },
> + .utmi_avalid = { 0x0080, 1, 1, 0, 1 },
> + .utmi_bvalid = { 0x0080, 0, 0, 0, 1 },
> + .utmi_ls = { 0x0080, 5, 4, 0, 1 },
> + }
> + },
> + .chg_det = {
> + .cp_det = { 0x0080, 8, 8, 0, 1 },
> + .dcp_det = { 0x0080, 8, 8, 0, 1 },
> + .dp_det = { 0x0080, 9, 9, 1, 0 },
> + .idm_sink_en = { 0x0010, 5, 5, 1, 0 },
> + .idp_sink_en = { 0x0010, 5, 5, 0, 1 },
> + .idp_src_en = { 0x0010, 14, 14, 0, 1 },
> + .rdm_pdwn_en = { 0x0010, 14, 14, 0, 1 },
> + .vdm_src_en = { 0x0010, 7, 6, 0, 3 },
> + .vdp_src_en = { 0x0010, 7, 6, 0, 3 },
> + },
> + },
> + {
> + .reg = 0x2000,
> + .num_ports = 1,
> + .phy_tuning = rk3576_usb2phy_tuning,
> + .clkout_ctl = { 0x2008, 0, 0, 1, 0 },
> + .port_cfgs = {
> + [USB2PHY_PORT_OTG] = {
> + .phy_sus = { 0x2000, 8, 0, 0, 0x1d1 },
> + .bvalid_det_en = { 0x20c0, 1, 1, 0, 1 },
> + .bvalid_det_st = { 0x20c4, 1, 1, 0, 1 },
> + .bvalid_det_clr = { 0x20c8, 1, 1, 0, 1 },
> + .ls_det_en = { 0x20c0, 0, 0, 0, 1 },
> + .ls_det_st = { 0x20c4, 0, 0, 0, 1 },
> + .ls_det_clr = { 0x20c8, 0, 0, 0, 1 },
> + .disfall_en = { 0x20c0, 6, 6, 0, 1 },
> + .disfall_st = { 0x20c4, 6, 6, 0, 1 },
> + .disfall_clr = { 0x20c8, 6, 6, 0, 1 },
> + .disrise_en = { 0x20c0, 5, 5, 0, 1 },
> + .disrise_st = { 0x20c4, 5, 5, 0, 1 },
> + .disrise_clr = { 0x20c8, 5, 5, 0, 1 },
> + .utmi_avalid = { 0x2080, 1, 1, 0, 1 },
> + .utmi_bvalid = { 0x2080, 0, 0, 0, 1 },
> + .utmi_ls = { 0x2080, 5, 4, 0, 1 },
> + }
> + },
> + .chg_det = {
> + .cp_det = { 0x2080, 8, 8, 0, 1 },
> + .dcp_det = { 0x2080, 8, 8, 0, 1 },
> + .dp_det = { 0x2080, 9, 9, 1, 0 },
> + .idm_sink_en = { 0x2010, 5, 5, 1, 0 },
> + .idp_sink_en = { 0x2010, 5, 5, 0, 1 },
> + .idp_src_en = { 0x2010, 14, 14, 0, 1 },
> + .rdm_pdwn_en = { 0x2010, 14, 14, 0, 1 },
> + .vdm_src_en = { 0x2010, 7, 6, 0, 3 },
> + .vdp_src_en = { 0x2010, 7, 6, 0, 3 },
> + },
> + },
> + { /* sentinel */ }
> +};
> +
> static const struct rockchip_usb2phy_cfg rk3588_phy_cfgs[] = {
> {
> .reg = 0x0000,
> @@ -2094,6 +2216,7 @@ static const struct of_device_id rockchip_usb2phy_dt_match[] = {
> { .compatible = "rockchip,rk3366-usb2phy", .data = &rk3366_phy_cfgs },
> { .compatible = "rockchip,rk3399-usb2phy", .data = &rk3399_phy_cfgs },
> { .compatible = "rockchip,rk3568-usb2phy", .data = &rk3568_phy_cfgs },
> + { .compatible = "rockchip,rk3576-usb2phy", .data = &rk3576_phy_cfgs },
> { .compatible = "rockchip,rk3588-usb2phy", .data = &rk3588_phy_cfgs },
> { .compatible = "rockchip,rv1108-usb2phy", .data = &rv1108_phy_cfgs },
> {}
>
More information about the linux-phy
mailing list