[PATCH v2 1/2] dt-bindings: phy: add NXP PTN3222 eUSB2 to USB2 redriver

[Stephan Gerhold]

On Fri, Aug 30, 2024 at 11:20:45AM +0300, Dmitry Baryshkov wrote:
> The NXP PTN3222 is the single-port eUSB2 to USB2 redriver that performs
> translation between eUSB2 and USB2 signalling schemes. It supports all
> three data rates: Low Speed, Full Speed and High Speed.
> 
> Reviewed-by: Conor Dooley <conor.dooley at microchip.com>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>

FWIW:

Reviewed-by: Stephan Gerhold <stephan.gerhold at linaro.org>

> ---
>  .../devicetree/bindings/phy/nxp,ptn3222.yaml       | 55 ++++++++++++++++++++++
>  1 file changed, 55 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/phy/nxp,ptn3222.yaml b/Documentation/devicetree/bindings/phy/nxp,ptn3222.yaml
> new file mode 100644
> index 000000000000..acec5bb2391d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/nxp,ptn3222.yaml
> @@ -0,0 +1,55 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/nxp,ptn3222.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NXP PTN3222 1-port eUSB2 to USB2 redriver
> +
> +maintainers:
> +  - Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - nxp,ptn3222
> +
> +  reg:
> +    maxItems: 1
> +
> +  "#phy-cells":
> +    const: 0
> +
> +  vdd1v8-supply:
> +    description: power supply (1.8V)
> +
> +  vdd3v3-supply:
> +    description: power supply (3.3V)
> +
> +  reset-gpios: true
> +
> +required:
> +  - compatible
> +  - reg
> +  - '#phy-cells'
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        redriver at 4f {
> +            compatible = "nxp,ptn3222";
> +            reg = <0x4f>;
> +            #phy-cells = <0>;
> +            vdd3v3-supply = <&vreg_3p3>;
> +            vdd1v8-supply = <&vreg_1p8>;
> +            reset-gpios = <&gpio_reset GPIO_ACTIVE_LOW>;
> +        };
> +    };
> +...
> 
> -- 
> 2.39.2
>