[PATCH 5/5] ARM: dts: imx6qdl: convert fsl,tx-d-cal to correct value

[Xu Yang]

make dtbs_check has below warning:

/home/nxf75279/work/usb/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dtb: usbphy at 20c9000: fsl,tx-d-cal: 5 is less than the minimum of 79
        from schema $id: http://devicetree.org/schemas/phy/fsl,mxs-usbphy.yaml#

According to schema, valid value of fsl,tx-d-cal is from 79 to 119. This
will convert register raw value <0x5> to corresponding <106>.

Signed-off-by: Xu Yang <xu.yang_2 at nxp.com>
---
 arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi
index a1ea33c4eeb7..d3396cb81912 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi
@@ -529,11 +529,11 @@ &usbotg {
 };
 
 &usbphy1 {
-	fsl,tx-d-cal = <0x5>;
+	fsl,tx-d-cal = <106>;
 };
 
 &usbphy2 {
-	fsl,tx-d-cal = <0x5>;
+	fsl,tx-d-cal = <106>;
 };
 
 &usdhc1 {
-- 
2.34.1