February 2017 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...

Starting: Wed Feb 1 04:10:59 PST 2017
Ending: Tue Feb 28 18:14:10 PST 2017
Messages: 612

• [ANNOUNCE] nvmetcli 0.3 release   Christoph Hellwig
• [dm-devel] [PATCHv2] Fill NVMe specific path info   Benjamin Marzinski
• [dm-devel] hch's native NVMe multipathing [was: Re: [PATCH 1/2] Don't blacklist nvme]   Bart Van Assche
• [dm-devel] hch's native NVMe multipathing [was: Re: [PATCH 1/2] Don't blacklist nvme]   Christoph Hellwig
• [dm-devel] hch's native NVMe multipathing [was: Re: [PATCH 1/2] Don't blacklist nvme]   hch at infradead.org
• [dm-devel] hch's native NVMe multipathing [was: Re: [PATCH 1/2] Don't blacklist nvme]   Christoph Hellwig
• [dm-devel] hch's native NVMe multipathing [was: Re: [PATCH 1/2] Don't blacklist nvme]   Christoph Hellwig
• [GIT PULL] nvme patches for 4.11   Sagi Grimberg
• [GIT PULL] nvme patches for 4.11   Jens Axboe
• [GIT PULL] nvme patches for 4.11   Jens Axboe
• [GIT PULL] nvme patches for 4.11   Daniel Roschka
• [GIT PULL] nvme patches for 4.11   Jens Axboe
• [GIT PULL] nvme patches for 4.11   Jens Axboe
• [GIT PULL] nvme patches for 4.11   Sagi Grimberg
• [GIT PULL] nvme patches for 4.11   Sagi Grimberg
• [GIT PULL] nvme patches for 4.11   Sagi Grimberg
• [PATCH -next] lightnvm: fix possible memory leak in nvme_nvm_get_l2p_tbl()   Wei Yongjun
• [PATCH 0/5] NVMe pci fixes, for-4.11   Keith Busch
• [PATCH 0/5] NVMe pci fixes, for-4.11   Sagi Grimberg
• [PATCH 0/5] OPAL patches cont'd   Jon Derrick
• [PATCH 1/1] MicroSemi Switchtec management interface driver   Emil Velikov
• [PATCH 1/1] MicroSemi Switchtec management interface driver   Logan Gunthorpe
• [PATCH 1/1] MicroSemi Switchtec management interface driver   Emil Velikov
• [PATCH 1/1] nvme-rdma: add support for host_traddr   Max Gurtovoy
• [PATCH 1/1] nvme-rdma: add support for host_traddr   Christoph Hellwig
• [PATCH 1/2] blk-mq-sched: Allocate sched reserved tags as specified in the original queue tagset   Sagi Grimberg
• [PATCH 1/2] blk-mq-sched: Allocate sched reserved tags as specified in the original queue tagset   Jens Axboe
• [PATCH 1/2] blk-mq-sched: Allocate sched reserved tags as specified in the original queue tagset   Omar Sandoval
• [PATCH 1/2] blk-mq-sched: Allocate sched reserved tags as specified in the original queue tagset   Jens Axboe
• [PATCH 1/2] blk-mq-sched: Allocate sched reserved tags as specified in the original queue tagset   Sagi Grimberg
• [PATCH 1/2] blk-mq-sched: Allocate sched reserved tags as specified in the original queue tagset   Omar Sandoval
• [PATCH 1/2] blk-mq-sched: Allocate sched reserved tags as specified in the original queue tagset   Jens Axboe
• [PATCH 1/2] blk-mq-sched: Allocate sched reserved tags as specified in the original queue tagset   Jens Axboe
• [PATCH 1/2] blk-mq-sched: Allocate sched reserved tags as specified in the original queue tagset   Sagi Grimberg
• [PATCH 1/2] blk-mq-sched: Allocate sched reserved tags as specified in the original queue tagset   Omar Sandoval
• [PATCH 1/2] blk-mq-sched: Allocate sched reserved tags as specified in the original queue tagset   Jens Axboe
• [PATCH 1/2] block/sed-opal: tone down not supported warnings   Christoph Hellwig
• [PATCH 1/2] block/sed-opal: tone down not supported warnings   Scott Bauer
• [PATCH 1/2] lightnvm: add generic ocssd detection   Christoph Hellwig
• [PATCH 1/2] lightnvm: add generic ocssd detection   Sagi Grimberg
• [PATCH 1/2] lightnvm: add generic ocssd detection   Keith Busch
• [PATCH 1/2] nvme-loop: retrieve iod from the cqe command_id   Sagi Grimberg
• [PATCH 1/2] nvme-loop: retrieve iod from the cqe command_id   Christoph Hellwig
• [PATCH 1/2] nvme-loop: retrieve iod from the cqe command_id   Sagi Grimberg
• [PATCH 1/2] nvme-rdma: move nvme cm status helper to .h file   Max Gurtovoy
• [PATCH 1/2] nvme-rdma: move nvme cm status helper to .h file   Christoph Hellwig
• [PATCH 1/3] block/sed-opal: Introduce free_opal_dev to free the structure and clean up state   Scott Bauer
• [PATCH 1/4] block/sed-opal: tone down not supported warnings   Christoph Hellwig
• [PATCH 1/4] block: move req_set_nomerge to blk.h   Christoph Hellwig
• [PATCH 1/4] block: move req_set_nomerge to blk.h   Christoph Hellwig
• [PATCH 1/4] block: move req_set_nomerge to blk.h   Christoph Hellwig
• [PATCH 1/4] block: move req_set_nomerge to blk.h   Sagi Grimberg
• [PATCH 1/4] nvme-cli: id-ctrl: Add vendor fields in JSON id-ctrl.   Chaitanya Kulkarni
• [PATCH 1/5] block/sed: Use ssize_t on atom parsers to return errors   Jon Derrick
• [PATCH 1/5] nvme/pci: Disable on removal when disconnected   Keith Busch
• [PATCH 1/5] nvme/pci: Disable on removal when disconnected   Johannes Thumshirn
• [PATCH 1/5] nvme/pci: Disable on removal when disconnected   Christoph Hellwig
• [PATCH 1/6] genirq: allow assigning affinity to present but not online CPUs   Christoph Hellwig
• [PATCH 1/6] genirq: allow assigning affinity to present but not online CPUs   Christoph Hellwig
• [PATCH 1/6] genirq: allow assigning affinity to present but not online CPUs   Keith Busch
• [PATCH 1/6] genirq: allow assigning affinity to present but not online CPUs   Christoph Hellwig
• [PATCH 1/7] nvme-cli: id-ctrl: Fix memory leak for JSON.   Chaitanya Kulkarni
• [PATCH 2/2] blk-mq: make sure to back-assign the request to rq_map in blk_mq_alloc_request_hctx   Sagi Grimberg
• [PATCH 2/2] blk-mq: make sure to back-assign the request to rq_map in blk_mq_alloc_request_hctx   Omar Sandoval
• [PATCH 2/2] blk-mq: make sure to back-assign the request to rq_map in blk_mq_alloc_request_hctx   Jens Axboe
• [PATCH 2/2] blk-mq: make sure to back-assign the request to rq_map in blk_mq_alloc_request_hctx   Omar Sandoval
• [PATCH 2/2] blk-mq: make sure to back-assign the request to rq_map in blk_mq_alloc_request_hctx   Jens Axboe
• [PATCH 2/2] blk-mq: make sure to back-assign the request to rq_map in blk_mq_alloc_request_hctx   Sagi Grimberg
• [PATCH 2/2] block/sed-opal: allocate struct opal_dev dynamically   Christoph Hellwig
• [PATCH 2/2] block/sed-opal: allocate struct opal_dev dynamically   Scott Bauer
• [PATCH 2/2] block/sed-opal: allocate struct opal_dev dynamically   Johannes Thumshirn
• [PATCH 2/2] block/sed-opal: allocate struct opal_dev dynamically   Christoph Hellwig
• [PATCH 2/2] block/sed-opal: allocate struct opal_dev dynamically   Johannes Thumshirn
• [PATCH 2/2] nvme-loop: fix a possible use-after-free when destroying the admin queue   Sagi Grimberg
• [PATCH 2/2] nvme-loop: fix a possible use-after-free when destroying the admin queue   Christoph Hellwig
• [PATCH 2/2] nvmet-rdma: use nvme cm status helper   Max Gurtovoy
• [PATCH 2/2] nvmet-rdma: use nvme cm status helper   Christoph Hellwig
• [PATCH 2/3] nvme/pci: re-check security protocol support after reset   Scott Bauer
• [PATCH 2/4] block/sed-opal: allocate struct opal_dev dynamically   Christoph Hellwig
• [PATCH 2/4] block: enumify ELEVATOR_*_MERGE   Christoph Hellwig
• [PATCH 2/4] block: enumify ELEVATOR_*_MERGE   Christoph Hellwig
• [PATCH 2/4] block: enumify ELEVATOR_*_MERGE   Christoph Hellwig
• [PATCH 2/4] block: enumify ELEVATOR_*_MERGE   Sagi Grimberg
• [PATCH 2/4] nvme-cli: nvme.c: Allow plug-ins to access to output formats and helper.   Chaitanya Kulkarni
• [PATCH 2/5] block/sed: Add helper to qualify response tokens   Jon Derrick
• [PATCH 2/5] nvme/pci: Cancel work after watchdog disabled   Keith Busch
• [PATCH 2/5] nvme/pci: Cancel work after watchdog disabled   Johannes Thumshirn
• [PATCH 2/5] nvme/pci: Cancel work after watchdog disabled   Christoph Hellwig
• [PATCH 2/6] genirq/affinity: assign vectors to all present CPUs   Christoph Hellwig
• [PATCH 2/7] nvme-cli: id-ns: Fix memory leak for JSON.   Chaitanya Kulkarni
• [PATCH 3/3] block/sed-opal: Propagate original error message to userland.   Scott Bauer
• [PATCH 3/4] block: optionally merge discontiguous discard bios into a single request   Christoph Hellwig
• [PATCH 3/4] block: optionally merge discontiguous discard bios into a single request   Ming Lei
• [PATCH 3/4] block: optionally merge discontiguous discard bios into a single request   Christoph Hellwig
• [PATCH 3/4] block: optionally merge discontiguous discard bios into a single request   Christoph Hellwig
• [PATCH 3/4] block: optionally merge discontiguous discard bios into a single request   Christoph Hellwig
• [PATCH 3/4] block: optionally merge discontiguous discard bios into a single request   Sagi Grimberg
• [PATCH 3/4] nvme-cli: Western Digital/HGST plug-in.   Chaitanya Kulkarni
• [PATCH 3/4] nvme: Check for Security send/recv support before issuing commands.   Christoph Hellwig
• [PATCH 3/5] block/sed: Check received header lengths   Jon Derrick
• [PATCH 3/5] nvme/core: Fix race kicking freed request_queue   Keith Busch
• [PATCH 3/5] nvme/core: Fix race kicking freed request_queue   Johannes Thumshirn
• [PATCH 3/5] nvme/core: Fix race kicking freed request_queue   Christoph Hellwig
• [PATCH 3/6] genirq/affinity: update CPU affinity for CPU hotplug events   Christoph Hellwig
• [PATCH 3/6] genirq/affinity: update CPU affinity for CPU hotplug events   kbuild test robot
• [PATCH 3/6] genirq/affinity: update CPU affinity for CPU hotplug events   kbuild test robot
• [PATCH 3/6] genirq/affinity: update CPU affinity for CPU hotplug events   Thomas Gleixner
• [PATCH 3/7] nvme-cli: error-log: Fix memory leak for JSON.   Chaitanya Kulkarni
• [PATCH 4/4] nvme-cli: Western Digital/HGST plug-in documentation.   Chaitanya Kulkarni
• [PATCH 4/4] nvme: re-check security protocol support after reset   Christoph Hellwig
• [PATCH 4/4] nvme: re-check security protocol support after reset   Keith Busch
• [PATCH 4/4] nvme: re-check security protocol support after reset   Scott Bauer
• [PATCH 4/4] nvme: re-check security protocol support after reset   Scott Bauer
• [PATCH 4/4] nvme: re-check security protocol support after reset   Christoph Hellwig
• [PATCH 4/4] nvme: re-check security protocol support after reset   Christoph Hellwig
• [PATCH 4/4] nvme: support ranged discard requests   Christoph Hellwig
• [PATCH 4/4] nvme: support ranged discard requests   Keith Busch
• [PATCH 4/4] nvme: support ranged discard requests   Christoph Hellwig
• [PATCH 4/4] nvme: support ranged discard requests   Christoph Hellwig
• [PATCH 4/4] nvme: support ranged discard requests   Christoph Hellwig
• [PATCH 4/4] nvme: support ranged discard requests   Christoph Hellwig
• [PATCH 4/4] nvme: support ranged discard requests   Sagi Grimberg
• [PATCH 4/4] nvme: support ranged discard requests   Sagi Grimberg
• [PATCH 4/5] block/sed: embedded function data into the function sequence   Jon Derrick
• [PATCH 4/5] nvme/pci: No special case for queue busy on IO   Keith Busch
• [PATCH 4/5] nvme/pci: No special case for queue busy on IO   Christoph Hellwig
• [PATCH 4/6] blk-mq: include all present CPUs in the default queue mapping   Christoph Hellwig
• [PATCH 4/7] nvme-cli: resv-report: Fix memory leak.   Chaitanya Kulkarni
• [PATCH 5/5] block/sed: Eliminate state variable   Jon Derrick
• [PATCH 5/5] nvme/pci: Complete all stuck requests   Keith Busch
• [PATCH 5/5] nvme/pci: Complete all stuck requests   Sagi Grimberg
• [PATCH 5/5] nvme/pci: Complete all stuck requests   Keith Busch
• [PATCH 5/5] nvme/pci: Complete all stuck requests   Marc MERLIN
• [PATCH 5/5] nvme/pci: Complete all stuck requests   J Freyensee
• [PATCH 5/5] nvme/pci: Complete all stuck requests   Marc MERLIN
• [PATCH 5/5] nvme/pci: Complete all stuck requests   Sagi Grimberg
• [PATCH 5/5] nvme/pci: Complete all stuck requests   Keith Busch
• [PATCH 5/5] nvme/pci: Complete all stuck requests   Christoph Hellwig
• [PATCH 5/5] nvme/pci: Complete all stuck requests   Christoph Hellwig
• [PATCH 5/5] nvme/pci: Complete all stuck requests   Keith Busch
• [PATCH 5/5] nvme/pci: Complete all stuck requests   Christoph Hellwig
• [PATCH 5/5] nvme/pci: Complete all stuck requests   Keith Busch
• [PATCH 5/5] nvme/pci: Complete all stuck requests   Sagi Grimberg
• [PATCH 5/5] nvme/pci: Complete all stuck requests   Keith Busch
• [PATCH 5/5] nvme/pci: Complete all stuck requests   Christoph Hellwig
• [PATCH 5/5] nvme/pci: Complete all stuck requests   Keith Busch
• [PATCH 5/5] nvme/pci: Complete all stuck requests   Christoph Hellwig
• [PATCH 5/5] nvme/pci: Complete all stuck requests   Christoph Hellwig
• [PATCH 5/5] nvme/pci: Complete all stuck requests   Keith Busch
• [PATCH 5/6] blk-mq: create hctx for each present CPU   Christoph Hellwig
• [PATCH 5/6] f2fs: add a kernel thread to issue discard commands asynchronously   Christoph Hellwig
• [PATCH 5/6] f2fs: add a kernel thread to issue discard commands asynchronously   Jaegeuk Kim
• [PATCH 5/7] nvme-cli: smart-log: Fix memory leak for JSON.   Chaitanya Kulkarni
• [PATCH 6/6] nvme: allocate queues for all possible CPUs   Christoph Hellwig
• [PATCH 6/7] nvme-cli: fw-log: Fix memory leak for JSON.   Chaitanya Kulkarni
• [PATCH 7/7] nvme-cli: json_add_smart_log(): Fix memory leak for JSON.   Chaitanya Kulkarni
• [PATCH] [PATCH] nvmet-rdma: Support 16K worth of inline data for write commands   Parav Pandit
• [PATCH] [PATCH] nvmet-rdma: Support 16K worth of inline data for write commands   Parav Pandit
• [PATCH] block/sed: Embed function data into the function sequence   Jon Derrick
• [PATCH] block/sed: Embed function data into the function sequence   Scott Bauer
• [PATCH] block/sed: Embed function data into the function sequence   Christoph Hellwig
• [PATCH] block: sed-opal: reduce stack size of ioctl handler   Arnd Bergmann
• [PATCH] block: sed-opal: reduce stack size of ioctl handler   Scott Bauer
• [PATCH] block: sed-opal: reduce stack size of ioctl handler   Scott Bauer
• [PATCH] block: sed-opal: reduce stack size of ioctl handler   David Laight
• [PATCH] block: sed-opal: reduce stack size of ioctl handler   Arnd Bergmann
• [PATCH] Detect NVMe controller in recent MacBooks   Daniel Roschka
• [PATCH] Detect NVMe controller in recent MacBooks   Christoph Hellwig
• [PATCH] Detect NVMe controller in recent MacBooks   Daniel Roschka
• [PATCH] Detect NVMe controller in recent MacBooks   Sagi Grimberg
• [PATCH] Fix SED-OPAL UAPI structs to prevent 32/64 bit size differences.   Scott Bauer
• [PATCH] lpfc: add missing Kconfig NVME dependencies   James Smart
• [PATCH] lpfc: add missing Kconfig NVME dependencies   Sagi Grimberg
• [PATCH] lpfc: add missing Kconfig NVME dependencies   Christoph Hellwig
• [PATCH] lpfc: add missing Kconfig NVME dependencies   James Smart
• [PATCH] Move stack parameters for sed_ioctl to prevent oversized stack with CONFIG_KASAN   Scott Bauer
• [PATCH] net/utils: fix semicolon.cocci warnings   kbuild test robot
• [PATCH] net/utils: fix semicolon.cocci warnings   David Miller
• [PATCH] net/utils: fix semicolon.cocci warnings   Keith Busch
• [PATCH] net/utils: fix semicolon.cocci warnings   Fengguang Wu
• [PATCH] nvme-cli: bug-fix: use right file name for perror.   Chaitanya Kulkarni
• [PATCH] nvme-cli: bug-fix: use right file name for perror.   Sagi Grimberg
• [PATCH] nvme-cli: fabrics: Fix to pass "host_traddr" to the kernel driver.   Duane Grigsby
• [PATCH] nvme-cli: fabrics: Fix to pass "host_traddr" to the kernel driver.   Max Gurtovoy
• [PATCH] nvme-cli: fabrics: Fix to pass "host_traddr" to the kernel driver.   Sagi Grimberg
• [PATCH] nvme-cli: fabrics: Fix to pass "host_traddr" to the kernel driver.   Max Gurtovoy
• [PATCH] nvme-cli: fabrics: Fix to pass "host_traddr" to the kernel driver.   Sagi Grimberg
• [PATCH] nvme-cli: fabrics: Fix to pass "host_traddr" to the kernel driver.   Trapp, Darren
• [PATCH] nvme-cli: fabrics: Fix to pass "host_traddr" to the kernel driver.   Sagi Grimberg
• [PATCH] nvme-cli: fabrics: Fix to pass "host_traddr" to the kernel driver.   Trapp, Darren
• [PATCH] nvme-cli: fabrics: Fix to pass "host_traddr" to the kernel driver.   Sagi Grimberg
• [PATCH] nvme-cli: fabrics: Fix to pass "host_traddr" to the kernel driver.   Keith Busch
• [PATCH] nvme-cli: smart-log: Allow negative values for temp sensors.   Chaitanya Kulkarni
• [PATCH] nvme-cli: smart-log: Allow negative values for temp sensors.   Sagi Grimberg
• [PATCH] nvme-cli: smart-log: Allow negative values for temp sensors.   Keith Busch
• [PATCH] nvme-fc: don't bother to validate ioccsz and iorcsz   James Smart
• [PATCH] nvme-fc: don't bother to validate ioccsz and iorcsz   Christoph Hellwig
• [PATCH] nvme-rdma: nvme-fc: Fix avoid tag set initialization twice.   Parav Pandit
• [PATCH] nvme-rdma: Support 2 inline data SGEs for write commands.   Parav Pandit
• [PATCH] nvme-rdma: Support 2 inline data SGEs for write commands.   Christoph Hellwig
• [PATCH] nvme-rdma: Support 2 inline data SGEs for write commands.   Sagi Grimberg
• [PATCH] nvme-rdma: Support 2 inline data SGEs for write commands.   Sagi Grimberg
• [PATCH] nvme-rdma: Support 2 inline data SGEs for write commands.   Parav Pandit
• [PATCH] nvme-rdma: Support 2 inline data SGEs for write commands.   Steve Wise
• [PATCH] nvme-rdma: Support 2 inline data SGEs for write commands.   Parav Pandit
• [PATCH] nvme-rdma: Support 2 inline data SGEs for write commands.   Steve Wise
• [PATCH] nvme-rdma: Support 2 inline data SGEs for write commands.   Sagi Grimberg
• [PATCH] nvme-rdma: Support 2 inline data SGEs for write commands.   Parav Pandit
• [PATCH] nvme-rdma: Support 2 inline data SGEs for write commands.   Sagi Grimberg
• [PATCH] nvme-rdma: Support 2 inline data SGEs for write commands.   Parav Pandit
• [PATCH] nvme-rdma: Support 2 inline data SGEs for write commands.   Sagi Grimberg
• [PATCH] nvme-rdma: Support 2 inline data SGEs for write commands.   Parav Pandit
• [PATCH] nvme/core: Check for Security send/recv support before issuing commands.   Scott Bauer
• [PATCH] nvme/core: Check for Security send/recv support before issuing commands.   Jon Derrick
• [PATCH] nvme/core: Check for Security send/recv support before issuing commands.   Jon Derrick
• [PATCH] nvme/lightnvm: Prevent small buffer overflow in nvme_nvm_identify   Scott Bauer
• [PATCH] nvme/lightnvm: Prevent small buffer overflow in nvme_nvm_identify   Keith Busch
• [PATCH] nvme/lightnvm: Prevent small buffer overflow in nvme_nvm_identify   Matias Bjørling
• [PATCH] nvme/pci: Poll CQ on timeout   Keith Busch
• [PATCH] nvme/pci: Poll CQ on timeout   Sagi Grimberg
• [PATCH] nvme/pci: Poll CQ on timeout   Christoph Hellwig
• [PATCH] nvme/pci: Poll CQ on timeout   Keith Busch
• [PATCH] nvme/pci: Poll CQ on timeout   Jens Axboe
• [PATCH] nvmet-rdma: Fix error handling   Christophe JAILLET
• [PATCH] nvmet-rdma: Fix error handling   Christoph Hellwig
• [PATCH] nvmet-rdma: Fix error handling   Sagi Grimberg
• [PATCH] nvmet: Avoid writing fabric_ops, queue pointers on every request.   Parav Pandit
• [PATCH] nvmet: Avoid writing fabric_ops, queue pointers on every request.   Sagi Grimberg
• [PATCH] nvmet: Avoid writing fabric_ops, queue pointers on every request.   Parav Pandit
• [PATCH] nvmet: Avoid writing fabric_ops, queue pointers on every request.   Sagi Grimberg
• [PATCH] nvmet: Avoid writing fabric_ops, queue pointers on every request.   Parav Pandit
• [PATCH] nvmet: Avoid writing fabric_ops, queue pointers on every request.   Parav Pandit
• [PATCH] nvmet: Avoid writing fabric_ops, queue pointers on every request.   Parav Pandit
• [PATCH] nvmet: Avoid writing fabric_ops, queue pointers on every request.   Sagi Grimberg
• [PATCH] nvmet: Avoid writing fabric_ops, queue pointers on every request.   hch at lst.de
• [PATCH] nvmet: Avoid writing fabric_ops, queue pointers on every request.   Sagi Grimberg
• [PATCH] nvmet: Avoid writing fabric_ops, queue pointers on every request.   Parav Pandit
• [PATCH] nvmet: Avoid writing fabric_ops, queue pointers on every request.   hch at lst.de
• [PATCH] nvmet: Avoid writing fabric_ops, queue pointers on every request.   Parav Pandit
• [PATCH] nvmet: discovery controller to set ioccsz and iorcsz   James Smart
• [PATCH] nvmet: discovery controller to set ioccsz and iorcsz   J Freyensee
• [PATCH] nvmet: discovery controller to set ioccsz and iorcsz   J Freyensee
• [PATCH] nvmet: Do not check for sg_cnt being zero for read/write commands.   Parav Pandit
• [PATCH] nvmet: Do not check for sg_cnt being zero for read/write commands.   Christoph Hellwig
• [PATCH] nvmet: Do not check for sg_cnt being zero for read/write commands.   Sagi Grimberg
• [PATCH] nvmet: Do not check for sg_cnt being zero for read/write commands.   Christoph Hellwig
• [PATCH] nvmet: Do not check for sg_cnt being zero for read/write commands.   Parav Pandit
• [PATCH] nvmet: Do not check for sg_cnt being zero for read/write commands.   Parav Pandit
• [PATCH] nvmet: Fixed avoided printing nvmet: twice in error logs.   Parav Pandit
• [PATCH] nvmet: Fixed avoided printing nvmet: twice in error logs.   Sagi Grimberg
• [PATCH] nvmet: Fixed avoided printing nvmet: twice in error logs.   Parav Pandit
• [PATCH] Revert "nvme/pci: Cancel work after watchdog disabled"   Keith Busch
• [PATCH] Revert "nvme/pci: Cancel work after watchdog disabled"   Sagi Grimberg
• [PATCH] switchtec: cleanup cdev init   Logan Gunthorpe
• [PATCH] switchtec: cleanup cdev init   Logan Gunthorpe
• [PATCH] switchtec: cleanup cdev init   Dan Williams
• [PATCH] switchtec: cleanup cdev init   Logan Gunthorpe
• [PATCH] switchtec: cleanup cdev init   Jason Gunthorpe
• [PATCH nvme-cli] Documentation: fix location of device reset   Johannes Thumshirn
• [PATCH nvme-cli] Documentation: fix location of device reset   Keith Busch
• [PATCH rfc 0/4] Introduce a new helper for parsing ipv[4|6]:port to socket address   Sagi Grimberg
• [PATCH rfc 0/4] Introduce a new helper for parsing ipv[4|6]:port to socket address   Chuck Lever
• [PATCH rfc 0/4] Introduce a new helper for parsing ipv[4|6]:port to socket address   Sagi Grimberg
• [PATCH rfc 0/4] Introduce a new helper for parsing ipv[4|6]:port to socket address   Chuck Lever
• [PATCH rfc 0/4] Introduce a new helper for parsing ipv[4|6]:port to socket address   Sagi Grimberg
• [PATCH rfc 1/4] net/utils: generic inet_pton_with_scope helper   Sagi Grimberg
• [PATCH rfc 1/4] net/utils: generic inet_pton_with_scope helper   kbuild test robot
• [PATCH rfc 1/4] net/utils: generic inet_pton_with_scope helper   Christoph Hellwig
• [PATCH rfc 1/4] net/utils: generic inet_pton_with_scope helper   Sagi Grimberg
• [PATCH rfc 1/4] net/utils: generic inet_pton_with_scope helper   Christoph Hellwig
• [PATCH rfc 2/4] nvmet-rdma: use generic inet_pton_with_scope   Sagi Grimberg
• [PATCH rfc 3/4] nvme-rdma: use inet_pton_with_scope helper   Sagi Grimberg
• [PATCH rfc 4/4] iscsi-target: use generic inet_pton_with_scope   Sagi Grimberg
• [PATCH rfc 4/4] iscsi-target: use generic inet_pton_with_scope   Nicholas A. Bellinger
• [PATCHv1 0/2] nvmet: cleanup around error logs   Parav Pandit
• [PATCH v1 0/4] Introduce a new helper for parsing ipv[4|6]:port to socket address   Sagi Grimberg
• [PATCHv1 1/2] nvmet: Fixed avoided printing nvmet: twice in error logs.   Parav Pandit
• [PATCHv1 1/2] nvmet: Fixed avoided printing nvmet: twice in error logs.   Sagi Grimberg
• [PATCHv1 1/2] nvmet: Fixed avoided printing nvmet: twice in error logs.   Christoph Hellwig
• [PATCH v1 1/4] net/utils: generic inet_pton_with_scope helper   Sagi Grimberg
• [PATCH v1 1/4] net/utils: generic inet_pton_with_scope helper   Christoph Hellwig
• [PATCHv1 2/2] nvmet: Introduced helper routine for controller status check.   Parav Pandit
• [PATCHv1 2/2] nvmet: Introduced helper routine for controller status check.   Sagi Grimberg
• [PATCHv1 2/2] nvmet: Introduced helper routine for controller status check.   Christoph Hellwig
• [PATCH v1 2/4] nvmet-rdma: use generic inet_pton_with_scope   Sagi Grimberg
• [PATCH v1 2/4] nvmet-rdma: use generic inet_pton_with_scope   Christoph Hellwig
• [PATCH v1 2/4] nvmet-rdma: use generic inet_pton_with_scope   Sagi Grimberg
• [PATCH v1 3/4] nvme-rdma: use inet_pton_with_scope helper   Sagi Grimberg
• [PATCH v1 3/4] nvme-rdma: use inet_pton_with_scope helper   Christoph Hellwig
• [PATCH v1 3/4] nvme-rdma: use inet_pton_with_scope helper   Sagi Grimberg
• [PATCH v1 4/4] iscsi-target: use generic inet_pton_with_scope   Sagi Grimberg
• [PATCHv1] nvmet-rdma: Support 16K worth of inline data for write commands   Parav Pandit
• [PATCHv1] nvmet-rdma: Support 16K worth of inline data for write commands   Christoph Hellwig
• [PATCHv1] nvmet-rdma: Support 16K worth of inline data for write commands   Sagi Grimberg
• [PATCHv1] nvmet-rdma: Support 16K worth of inline data for write commands   Parav Pandit
• [PATCHv1] nvmet-rdma: Support 16K worth of inline data for write commands   Parav Pandit
• [PATCHv1] nvmet: Avoid writing fabric_ops, queue pointers on every request.   Parav Pandit
• [PATCH v2 0/4] New Microsemi PCI Switch Management Driver   Logan Gunthorpe
• [PATCH v2 0/4] New Microsemi PCI Switch Management Driver   Wei Zhang
• [PATCH v2 0/4] New Microsemi PCI Switch Management Driver   Wei Zhang
• [PATCH v2 0/4] New Microsemi PCI Switch Management Driver   Greg Kroah-Hartman
• [PATCH v2 0/4] New Microsemi PCI Switch Management Driver   Jens Axboe
• [PATCH v2 0/4] New Microsemi PCI Switch Management Driver   Logan Gunthorpe
• [PATCH v2 0/4] New Microsemi PCI Switch Management Driver   Logan Gunthorpe
• [PATCH v2 0/4] New Microsemi PCI Switch Management Driver   Sinan Kaya
• [PATCH v2 0/4] New Microsemi PCI Switch Management Driver   Jens Axboe
• [PATCH v2 0/4] New Microsemi PCI Switch Management Driver   Jens Axboe
• [PATCH v2 0/4] New Microsemi PCI Switch Management Driver   Greg Kroah-Hartman
• [PATCH v2 0/4] New Microsemi PCI Switch Management Driver   Logan Gunthorpe
• [PATCH v2 0/4] New Microsemi PCI Switch Management Driver   Bjorn Helgaas
• [PATCH v2 0/4] New Microsemi PCI Switch Management Driver   Logan Gunthorpe
• [PATCHv2 0/5] OPAL patche'd cont'd   Jon Derrick
• [PATCHv2 0/5] OPAL patche'd cont'd   Christoph Hellwig
• [PATCH v2 00/18] lpfc: Add NVME Fabrics support (11.2.0.7)   James Smart
• [PATCH v2 01/18] lpfc: Correct WQ creation for pagesize   James Smart
• [PATCH v2 01/18] lpfc: Correct WQ creation for pagesize   Johannes Thumshirn
• [PATCH v2 01/18] lpfc: Correct WQ creation for pagesize   Christoph Hellwig
• [PATCH v2 02/18] lpfc: use pci_irq_alloc_vectors and pci_irq_free_vectors   James Smart
• [PATCH v2 02/18] lpfc: use pci_irq_alloc_vectors and pci_irq_free_vectors   Johannes Thumshirn
• [PATCH v2 02/18] lpfc: use pci_irq_alloc_vectors and pci_irq_free_vectors   Christoph Hellwig
• [PATCH v2 03/18] lpfc: NVME Initiator: Base modifications Part A   James Smart
• [PATCH v2 04/18] lpfc: NVME Initiator: Base modifications Part B   James Smart
• [PATCH v2 05/18] lpfc: NVME Initiator: Base modifications Part C   James Smart
• [PATCH v2 06/18] lpfc: NVME Initiator: Base modifications Part D   James Smart
• [PATCH v2 07/18] lpfc: NVME Initiator: Base modifications Part E   James Smart
• [PATCH v2 07/18] lpfc: NVME Initiator: Base modifications Part E   Johannes Thumshirn
• [PATCH v2 07/18] lpfc: NVME Initiator: Base modifications Part E   James Smart
• [PATCH v2 07/18] lpfc: NVME Initiator: Base modifications Part E   Christoph Hellwig
• [PATCH v2 07/18] lpfc: NVME Initiator: Base modifications Part E   James Smart
• [PATCH v2 07/18] lpfc: NVME Initiator: Base modifications Part E   Hannes Reinecke
• [PATCH v2 08/18] lpfc: NVME Initiator: Base modifications Part F   James Smart
• [PATCH v2 09/18] lpfc: NVME Initiator: Merge into FC discovery   James Smart
• [PATCHv2 1/1] nvme-rdma: add support for host_traddr   Max Gurtovoy
• [PATCHv2 1/1] nvme-rdma: add support for host_traddr   Sagi Grimberg
• [PATCHv2 1/2] blk-mq: Export blk_mq_freeze_queue_wait   Keith Busch
• [PATCHv2 1/2] blk-mq: Export blk_mq_freeze_queue_wait   Christoph Hellwig
• [PATCHv2 1/2] blk-mq: Export blk_mq_freeze_queue_wait   Sagi Grimberg
• [PATCHv2 1/2] nvme-rdma: move nvme cm status helper to .h file   Max Gurtovoy
• [PATCHv2 1/2] nvme-rdma: move nvme cm status helper to .h file   Christoph Hellwig
• [PATCHv2 1/2] nvme-rdma: move nvme cm status helper to .h file   Bart Van Assche
• [PATCHv2 1/2] nvme-rdma: move nvme cm status helper to .h file   Max Gurtovoy
• [PATCHv2 1/2] nvme-rdma: move nvme cm status helper to .h file   hch at infradead.org
• [PATCHv2 1/2] nvme-rdma: move nvme cm status helper to .h file   Max Gurtovoy
• [PATCHv2 1/2] nvme-rdma: move nvme cm status helper to .h file   Sagi Grimberg
• [PATCH v2 1/4] MicroSemi Switchtec management interface driver   Logan Gunthorpe
• [PATCH v2 1/4] MicroSemi Switchtec management interface driver   Greg Kroah-Hartman
• [PATCH v2 1/4] MicroSemi Switchtec management interface driver   Greg Kroah-Hartman
• [PATCH v2 1/4] MicroSemi Switchtec management interface driver   Logan Gunthorpe
• [PATCH v2 1/4] MicroSemi Switchtec management interface driver   Greg Kroah-Hartman
• [PATCH v2 1/4] MicroSemi Switchtec management interface driver   Logan Gunthorpe
• [PATCH v2 1/4] MicroSemi Switchtec management interface driver   Greg Kroah-Hartman
• [PATCH v2 1/4] MicroSemi Switchtec management interface driver   Logan Gunthorpe
• [PATCH v2 1/4] MicroSemi Switchtec management interface driver   Bjorn Helgaas
• [PATCH v2 1/4] MicroSemi Switchtec management interface driver   Logan Gunthorpe
• [PATCHv2 1/5] block/sed: Use ssize_t on atom parsers to return errors   Jon Derrick
• [PATCH v2 10/18] lpfc: NVME Initiator: bind to nvme_fc api   James Smart
• [PATCH v2 11/18] lpfc: NVME Initiator: Add debugfs support   James Smart
• [PATCH v2 12/18] lpfc: NVME Target: Base modifications   James Smart
• [PATCH v2 13/18] lpfc: NVME Target: Receive buffer updates   James Smart
• [PATCH v2 14/18] lpfc: NVME Target: Merge into FC discovery   James Smart
• [PATCH v2 15/18] lpfc: NVME Target: bind to nvmet_fc api   James Smart
• [PATCH v2 16/18] lpfc: NVME Target: Add debugfs support   James Smart
• [PATCH v2 17/18] lpfc: Update copyrights   James Smart
• [PATCH v2 18/18] lpfc: Update lpfc version to 11.2.0.7   James Smart
• [PATCHv2 2/2] nvme: Complete all stuck requests   Keith Busch
• [PATCHv2 2/2] nvme: Complete all stuck requests   Christoph Hellwig
• [PATCHv2 2/2] nvme: Complete all stuck requests   Sagi Grimberg
• [PATCHv2 2/2] nvme: Complete all stuck requests   Keith Busch
• [PATCHv2 2/2] nvme: Complete all stuck requests   Sagi Grimberg
• [PATCHv2 2/2] nvme: Complete all stuck requests   Keith Busch
• [PATCHv2 2/2] nvme: Complete all stuck requests   Artur Paszkiewicz
• [PATCHv2 2/2] nvme: Complete all stuck requests   Sagi Grimberg
• [PATCHv2 2/2] nvme: Complete all stuck requests   Keith Busch
• [PATCHv2 2/2] nvmet-rdma: use nvme cm status helper   Max Gurtovoy
• [PATCH v2 2/4] switchtec: Add user interface documentation   Logan Gunthorpe
• [PATCHv2 2/5] block/sed: Add helper to qualify response tokens   Jon Derrick
• [PATCH v2 3/4] switchtec: Add sysfs attributes to the Switchtec driver   Logan Gunthorpe
• [PATCH v2 3/4] switchtec: Add sysfs attributes to the Switchtec driver   Greg Kroah-Hartman
• [PATCH v2 3/4] switchtec: Add sysfs attributes to the Switchtec driver   Bjorn Helgaas
• [PATCH v2 3/4] switchtec: Add sysfs attributes to the Switchtec driver   Logan Gunthorpe
• [PATCH v2 3/4] switchtec: Add sysfs attributes to the Switchtec driver   Bjorn Helgaas
• [PATCHv2 3/5] block/sed: Check received header lengths   Jon Derrick
• [PATCH v2 4/4] Maintainers: Add Information for SED Opal library   Scott Bauer
• [PATCH v2 4/4] Maintainers: Add Information for SED Opal library   Elliott, Robert (Persistent Memory)
• [PATCH v2 4/4] Maintainers: Add Information for SED Opal library   Elliott, Robert (Persistent Memory)
• [PATCH v2 4/4] Maintainers: Add Information for SED Opal library   hch at infradead.org
• [PATCH v2 4/4] switchtec: Add IOCTLs to the Switchtec driver   Logan Gunthorpe
• [PATCHv2 4/5] block/sed: Embed function data into the function sequence   Jon Derrick
• [PATCHv2 4/5] block/sed: Embed function data into the function sequence   Christoph Hellwig
• [PATCHv2 4/5] block/sed: Embed function data into the function sequence   Scott Bauer
• [PATCHv2 4/5] block/sed: Embed function data into the function sequence   Christoph Hellwig
• [PATCHv2 5/5] block/sed: Eliminate state variable   Jon Derrick
• [PATCHv2 5/5] block/sed: Eliminate state variable   Christoph Hellwig
• [PATCHv2] Fill NVMe specific path info   Keith Busch
• [PATCH v2] lpfc: add missing Kconfig NVME dependencies   James Smart
• [PATCH v2] lpfc: add missing Kconfig NVME dependencies   Martin K. Petersen
• [PATCH v2] Move stack parameters for sed_ioctl to prevent oversized stack with CONFIG_KASAN   Scott Bauer
• [PATCH v2] Move stack parameters for sed_ioctl to prevent oversized stack with CONFIG_KASAN   Christoph Hellwig
• [PATCH v2] nvme/core: Check for Security send/recv support before issuing commands.   Scott Bauer
• [PATCH v2] nvme/core: Check for Security send/recv support before issuing commands.   Jon Derrick
• [PATCH v2] nvme/core: Check for Security send/recv support before issuing commands.   Christoph Hellwig
• [PATCH v2] nvme: make nvmf_register_transport require a create_ctrl callback   Johannes Thumshirn
• [PATCH v2] nvme: make nvmf_register_transport require a create_ctrl callback   Sagi Grimberg
• [PATCH v2] nvmet: discovery controller to set ioccsz and iorcsz   James Smart
• [PATCH v2] nvmet: discovery controller to set ioccsz and iorcsz   Christoph Hellwig
• [PATCH v2] nvmet: discovery controller to set ioccsz and iorcsz   J Freyensee
• [PATCH v3 0/2] nvme: APST support   Andy Lutomirski
• [PATCH v3 0/4] New Microsemi PCI Switch Management Driver   Logan Gunthorpe
• [PATCHv3 0/4] OPAL patches cont'd   Jon Derrick
• [PATCH v3 00/16] lpfc: Add NVME Fabrics support   James Smart
• [PATCH v3 00/16] lpfc: Add NVME Fabrics support   Sagi Grimberg
• [PATCH v3 00/16] lpfc: Add NVME Fabrics support   James Smart
• [PATCH v3 00/16] lpfc: Add NVME Fabrics support   Bart Van Assche
• [PATCH v3 00/16] lpfc: Add NVME Fabrics support   Martin K. Petersen
• [PATCH v3 01/16] lpfc: Correct WQ creation for pagesize   James Smart
• [PATCH v3 02/16] lpfc: use pci_irq_alloc_vectors and pci_irq_free_vectors   James Smart
• [PATCH v3 02/16] lpfc: use pci_irq_alloc_vectors and pci_irq_free_vectors   Hannes Reinecke
• [PATCH v3 03/16] lpfc: minor code cleanups   James Smart
• [PATCH v3 03/16] lpfc: minor code cleanups   Johannes Thumshirn
• [PATCH v3 03/16] lpfc: minor code cleanups   Hannes Reinecke
• [PATCH v3 04/16] lpfc: refactor debugfs queue prints   James Smart
• [PATCH v3 04/16] lpfc: refactor debugfs queue prints   Johannes Thumshirn
• [PATCH v3 04/16] lpfc: refactor debugfs queue prints   Hannes Reinecke
• [PATCH v3 05/16] lpfc: refactor debugfs queue dump routines   James Smart
• [PATCH v3 05/16] lpfc: refactor debugfs queue dump routines   Hannes Reinecke
• [PATCH v3 05/16] lpfc: refactor debugfs queue dump routines   Johannes Thumshirn
• [PATCH v3 06/16] lpfc: NVME Initiator: Base modifications   James Smart
• [PATCH v3 06/16] lpfc: NVME Initiator: Base modifications   Hannes Reinecke
• [PATCH v3 07/16] lpfc: NVME Initiator: Merge into FC discovery   James Smart
• [PATCH v3 07/16] lpfc: NVME Initiator: Merge into FC discovery   Hannes Reinecke
• [PATCH v3 08/16] lpfc: NVME Initiator: bind to nvme_fc api   James Smart
• [PATCH v3 08/16] lpfc: NVME Initiator: bind to nvme_fc api   Hannes Reinecke
• [PATCH v3 09/16] lpfc: NVME Initiator: Add debugfs support   James Smart
• [PATCH v3 09/16] lpfc: NVME Initiator: Add debugfs support   Hannes Reinecke
• [PATCH v3 1/2] nvme: Add a quirk mechanism that uses identify_ctrl   Andy Lutomirski
• [PATCH V3 1/2] uapi: sed-opal fix IOW for activate lsp to use correct struct   Scott Bauer
• [PATCHv3 1/4] block/sed: Use ssize_t on atom parsers to return errors   Jon Derrick
• [PATCH v3 1/4] MicroSemi Switchtec management interface driver   Logan Gunthorpe
• [PATCH v3 10/16] lpfc: NVME Target: Base modifications   James Smart
• [PATCH v3 10/16] lpfc: NVME Target: Base modifications   Hannes Reinecke
• [PATCH v3 11/16] lpfc: NVME Target: Receive buffer updates   James Smart
• [PATCH v3 11/16] lpfc: NVME Target: Receive buffer updates   Hannes Reinecke
• [PATCH v3 12/16] lpfc: NVME Target: Merge into FC discovery   James Smart
• [PATCH v3 12/16] lpfc: NVME Target: Merge into FC discovery   Hannes Reinecke
• [PATCH v3 13/16] lpfc: NVME Target: bind to nvmet_fc api   James Smart
• [PATCH v3 13/16] lpfc: NVME Target: bind to nvmet_fc api   Hannes Reinecke
• [PATCH v3 14/16] lpfc: NVME Target: Add debugfs support   James Smart
• [PATCH v3 14/16] lpfc: NVME Target: Add debugfs support   Hannes Reinecke
• [PATCH v3 15/16] lpfc: Update copyrights   James Smart
• [PATCH v3 15/16] lpfc: Update copyrights   Johannes Thumshirn
• [PATCH v3 15/16] lpfc: Update copyrights   Hannes Reinecke
• [PATCH v3 16/16] lpfc: Update lpfc version to 11.2.0.7   James Smart
• [PATCH v3 16/16] lpfc: Update lpfc version to 11.2.0.7   Johannes Thumshirn
• [PATCH v3 16/16] lpfc: Update lpfc version to 11.2.0.7   Hannes Reinecke
• [PATCH V3 2/2] Move stack parameters for sed_ioctl to prevent oversized stack with CONFIG_KASAN   Scott Bauer
• [PATCH V3 2/2] Move stack parameters for sed_ioctl to prevent oversized stack with CONFIG_KASAN   Rafael Antognolli
• [PATCH V3 2/2] Move stack parameters for sed_ioctl to prevent oversized stack with CONFIG_KASAN   Johannes Thumshirn
• [PATCH V3 2/2] Move stack parameters for sed_ioctl to prevent oversized stack with CONFIG_KASAN   Arnd Bergmann
• [PATCH V3 2/2] Move stack parameters for sed_ioctl to prevent oversized stack with CONFIG_KASAN   David Laight
• [PATCH V3 2/2] Move stack parameters for sed_ioctl to prevent oversized stack with CONFIG_KASAN   Arnd Bergmann
• [PATCH V3 2/2] Move stack parameters for sed_ioctl to prevent oversized stack with CONFIG_KASAN   Scott Bauer
• [PATCH v3 2/2] nvme: Enable autonomous power state transitions   Andy Lutomirski
• [PATCH v3 2/2] nvme: Enable autonomous power state transitions   Andy Lutomirski
• [PATCH v3 2/2] nvme: Enable autonomous power state transitions   Christoph Hellwig
• [PATCHv3 2/4] block/sed: Add helper to qualify response tokens   Jon Derrick
• [PATCH v3 2/4] switchtec: Add user interface documentation   Logan Gunthorpe
• [PATCHv3 3/4] block/sed: Check received header lengths   Jon Derrick
• [PATCH v3 3/4] switchtec: Add sysfs attributes to the Switchtec driver   Logan Gunthorpe
• [PATCHv3 4/4] block/sed: Embed function data into the function sequence   Jon Derrick
• [PATCH v3 4/4] switchtec: Add IOCTLs to the Switchtec driver   Logan Gunthorpe
• [PATCH v4 0/2] [PATCH v4 0/2] nvme: APST support   Andy Lutomirski
• [PATCH v4 0/2] [PATCH v4 0/2] nvme: APST support   Sagi Grimberg
• [PATCH v4 0/4] New Microsemi PCI Switch Management Driver   Logan Gunthorpe
• [PATCHv4 0/4] OPAL patches, cont'd   Jon Derrick
• [PATCHv4 0/4] OPAL patches, cont'd   Jens Axboe
• [PATCHv4 0/4] OPAL patches, cont'd   Scott Bauer
• [PATCH v4 1/2] nvme: Add a quirk mechanism that uses identify_ctrl   Andy Lutomirski
• [PATCH V4 1/2] uapi: sed-opal fix IOW for activate lsp to use correct struct   Scott Bauer
• [PATCH V4 1/2] uapi: sed-opal fix IOW for activate lsp to use correct struct   Christoph Hellwig
• [PATCHv4 1/4] block/sed: Use ssize_t on atom parsers to return errors   Jon Derrick
• [PATCH v4 1/4] MicroSemi Switchtec management interface driver   Logan Gunthorpe
• [PATCH V4 2/2] Move stack parameters for sed_ioctl to prevent oversized stack with CONFIG_KASAN   Scott Bauer
• [PATCH V4 2/2] Move stack parameters for sed_ioctl to prevent oversized stack with CONFIG_KASAN   Christoph Hellwig
• [PATCH v4 2/2] nvme: Enable autonomous power state transitions   Andy Lutomirski
• [PATCH v4 2/2] nvme: Enable autonomous power state transitions   Christoph Hellwig
• [PATCHv4 2/4] block/sed: Add helper to qualify response tokens   Jon Derrick
• [PATCH v4 2/4] switchtec: Add user interface documentation   Logan Gunthorpe
• [PATCHv4 3/4] block/sed: Check received header lengths   Jon Derrick
• [PATCH v4 3/4] switchtec: Add sysfs attributes to the Switchtec driver   Logan Gunthorpe
• [PATCHv4 4/4] block/sed: Embed function data into the function sequence   Jon Derrick
• [PATCHv4 4/4] block/sed: Embed function data into the function sequence   Scott Bauer
• [PATCHv4 4/4] block/sed: Embed function data into the function sequence   Christoph Hellwig
• [PATCHv4 4/4] block/sed: Embed function data into the function sequence   Jon Derrick
• [PATCHv4 4/4] block/sed: Embed function data into the function sequence   Jens Axboe
• [PATCHv4 4/4] block/sed: Embed function data into the function sequence   Scott Bauer
• [PATCHv4 4/4] block/sed: Embed function data into the function sequence   Jens Axboe
• [PATCHv4 4/4] block/sed: Embed function data into the function sequence   Keith Busch
• [PATCH v4 4/4] switchtec: Add IOCTLs to the Switchtec driver   Logan Gunthorpe
• [PATCH v5 0/4] New Microsemi PCI Switch Management Driver   Logan Gunthorpe
• [PATCH v5 0/4] New Microsemi PCI Switch Management Driver   Bjorn Helgaas
• [PATCH v5 0/4] New Microsemi PCI Switch Management Driver   Logan Gunthorpe
• [PATCH v5 0/4] New Microsemi PCI Switch Management Driver   Greg Kroah-Hartman
• [PATCH v5 0/4] SED OPAL Library   Christoph Hellwig
• [PATCH V5 1/4] block: sed-opal: change ioctl to take user pointer instead of unsinged long   Scott Bauer
• [PATCH V5 1/4] block: sed-opal: change ioctl to take user pointer instead of unsinged long   Scott Bauer
• [PATCH V5 1/4] block: sed-opal: change ioctl to take user pointer instead of unsinged long   Christoph Hellwig
• [PATCH v5 1/4] Include: Uapi: Add user ABI for Sed/Opal   Christoph Hellwig
• [PATCH v5 1/4] MicroSemi Switchtec management interface driver   Logan Gunthorpe
• [PATCH v5 2/4] block: Add Sed-opal library   Christoph Hellwig
• [PATCH v5 2/4] block: Add Sed-opal library   Scott Bauer
• [PATCH v5 2/4] switchtec: Add user interface documentation   Logan Gunthorpe
• [PATCH V5 2/4] uapi: sed-opal fix IOW for activate lsp to use correct struct   Scott Bauer
• [PATCH V5 2/4] uapi: sed-opal fix IOW for activate lsp to use correct struct   Christoph Hellwig
• [PATCH V5 3/4] Move stack parameters for sed_ioctl to prevent oversized stack with CONFIG_KASAN   Scott Bauer
• [PATCH V5 3/4] Move stack parameters for sed_ioctl to prevent oversized stack with CONFIG_KASAN   Scott Bauer
• [PATCH V5 3/4] Move stack parameters for sed_ioctl to prevent oversized stack with CONFIG_KASAN   David Laight
• [PATCH V5 3/4] Move stack parameters for sed_ioctl to prevent oversized stack with CONFIG_KASAN   Arnd Bergmann
• [PATCH V5 3/4] Move stack parameters for sed_ioctl to prevent oversized stack with CONFIG_KASAN   David Laight
• [PATCH V5 3/4] Move stack parameters for sed_ioctl to prevent oversized stack with CONFIG_KASAN   Arnd Bergmann
• [PATCH v5 3/4] nvme: Add Support for Opal: Unlock from S3 & Opal Allocation/Ioctls   Christoph Hellwig
• [PATCH v5 3/4] switchtec: Add sysfs attributes to the Switchtec driver   Logan Gunthorpe
• [PATCH v5 4/4] Maintainers: Add maintainer info for SED/Opal code   Christoph Hellwig
• [PATCH V5 4/4] Maintainers: Modify SED list from nvme to block   Scott Bauer
• [PATCH V5 4/4] Maintainers: Modify SED list from nvme to block   Christoph Hellwig
• [PATCH v5 4/4] switchtec: Add IOCTLs to the Switchtec driver   Logan Gunthorpe
• [PATCH v6 0/3] SED OPAL Library   Scott Bauer
• [PATCH v6 0/3] SED OPAL Library   Christoph Hellwig
• [PATCH v6 0/3] SED OPAL Library   Jens Axboe
• [PATCH v6 1/3] Include: Uapi: Add user ABI for Sed/Opal   Scott Bauer
• [PATCH V6 1/3] uapi: sed-opal fix IOW for activate lsp to use correct struct   Scott Bauer
• [PATCH V6 1/3] uapi: sed-opal fix IOW for activate lsp to use correct struct   Jens Axboe
• [PATCH v6 2/3] block: Add Sed-opal library   Scott Bauer
• [PATCH V6 2/3] Move stack parameters for sed_ioctl to prevent oversized stack with CONFIG_KASAN   Scott Bauer
• [PATCH V6 3/3] Maintainers: Modify SED list from nvme to block   Scott Bauer
• [PATCH v6 3/3] nvme: Add Support for Opal: Unlock from S3 & Opal Allocation/Ioctls   Scott Bauer
• blk_integrity_revalidate() clears BDI_CAP_STABLE_WRITES   Ilya Dryomov
• Final opal patches for rc1   Scott Bauer
• Final opal patches for rc1   Jens Axboe
• hch's native NVMe multipathing [was: Re: [PATCH 1/2] Don't blacklist nvme]   Mike Snitzer
• hch's native NVMe multipathing [was: Re: [PATCH 1/2] Don't blacklist nvme]   Mike Snitzer
• hch's native NVMe multipathing [was: Re: [PATCH 1/2] Don't blacklist nvme]   Mike Snitzer
• hch's native NVMe multipathing [was: Re: [PATCH 1/2] Don't blacklist nvme]   Bart Van Assche
• hch's native NVMe multipathing [was: Re: [PATCH 1/2] Don't blacklist nvme]   Keith Busch
• hch's native NVMe multipathing [was: Re: [PATCH 1/2] Don't blacklist nvme]   Sagi Grimberg
• hch's native NVMe multipathing [was: Re: [PATCH 1/2] Don't blacklist nvme]   Keith Busch
• hch's native NVMe multipathing [was: Re: [PATCH 1/2] Don't blacklist nvme]   Mike Snitzer
• hch's native NVMe multipathing [was: Re: [PATCH 1/2] Don't blacklist nvme]   Bart Van Assche
• hch's native NVMe multipathing [was: Re: [PATCH 1/2] Don't blacklist nvme]   Mike Snitzer
• hch's native NVMe multipathing [was: Re: [PATCH 1/2] Don't blacklist nvme]   Keith Busch
• hch's native NVMe multipathing [was: Re: [PATCH 1/2] Don't blacklist nvme]   Bart Van Assche
• hch's native NVMe multipathing [was: Re: [PATCH 1/2] Don't blacklist nvme]   Mike Snitzer
• hch's native NVMe multipathing [was: Re: [PATCH 1/2] Don't blacklist nvme]   Mike Snitzer
• hch's native NVMe multipathing [was: Re: [PATCH 1/2] Don't blacklist nvme]   Mike Snitzer
• Linux 4.9.8 + NVMe CiB Issue   Marc Smith
• Linux 4.9.8 + NVMe CiB Issue   Keith Busch
• Linux 4.9.8 + NVMe CiB Issue   Marc Smith
• Linux 4.9.8 + NVMe CiB Issue   Marc Smith
• Linux 4.9.8 + NVMe CiB Issue   Marc Smith
• No subject   Scott Bauer
• No subject   Jens Axboe
• nvme-cli: JSON format Memory leak fixes.   Chaitanya Kulkarni
• nvme-cli: JSON format Memory leak fixes.   Keith Busch
• nvme-cli: Western Digital/HGST Plug-in.   Chaitanya Kulkarni
• NVMe-oF Crash Under Load   Gruher, Joseph R
• NVMe-oF Crash Under Load   Sagi Grimberg
• NVMe IO error due to abort..   Linus Torvalds
• NVMe IO error due to abort..   Linus Torvalds
• NVMe IO error due to abort..   Jens Axboe
• NVMe IO error due to abort..   Linus Torvalds
• NVMe IO error due to abort..   Linus Torvalds
• NVMe IO error due to abort..   Jens Axboe
• NVMe IO error due to abort..   Jens Axboe
• NVMe IO error due to abort..   Linus Torvalds
• NVMe IO error due to abort..   Jens Axboe
• NVMe IO error due to abort..   Jens Axboe
• NVMe IO error due to abort..   Linus Torvalds
• NVMe IO error due to abort..   Linus Torvalds
• NVMe IO error due to abort..   Jens Axboe
• NVMe issues with NVMe rescan/reset/remove operation   Yi Zhang
• NVMe issues with NVMe rescan/reset/remove operation   Keith Busch
• NVMe nvme_queue_rq crash   Bauer, John
• NVMe nvme_queue_rq crash   Keith Busch
• NVMe nvme_queue_rq crash   Bauer, John
• nvmf regression with mq-deadline   Sagi Grimberg
• nvmf regression with mq-deadline   Sagi Grimberg
• nvmf regression with mq-deadline   Sagi Grimberg
• nvmf regression with mq-deadline   Jens Axboe
• OPAL fixups   Christoph Hellwig
• OPAL fixups   Keith Busch
• OPAL fixups   Jens Axboe
• Sed-opal Fixes   Scott Bauer
• Sed-opal fixups   Scott Bauer
• Sed-opal fixups   David Laight
• Sed-opal fixups   Scott Bauer
• Sed-opal fixups   Jens Axboe
• Sed-opal fixups   Scott Bauer
• SED Opal Fixups   Scott Bauer
• spread MSI(-X) vectors to all possible CPUs   Christoph Hellwig
• support for multi-range discard requests   Christoph Hellwig
• support for multi-range discard requests V2   Christoph Hellwig
• support for multi-range discard requests V3   Christoph Hellwig
• support for multi-range discard requests V3   Jens Axboe
• support for multi-range discard requests V3   Sagi Grimberg
• Unexpected issues with 2 NVME initiators using the same target   shahar.salzman
• Unexpected issues with 2 NVME initiators using the same target   Sagi Grimberg
• Unexpected issues with 2 NVME initiators using the same target   Laurence Oberman
• Unexpected issues with 2 NVME initiators using the same target   Sagi Grimberg
• Unexpected issues with 2 NVME initiators using the same target   shahar.salzman
• Unexpected issues with 2 NVME initiators using the same target   Gruher, Joseph R
• Unexpected issues with 2 NVME initiators using the same target   Sagi Grimberg
• Unexpected issues with 2 NVME initiators using the same target   Sagi Grimberg
• Unexpected issues with 2 NVME initiators using the same target   Gruher, Joseph R

Last message date: Tue Feb 28 18:14:10 PST 2017
Archived on: Tue Feb 28 18:17:13 PST 2017

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...