July 2023 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Sun Jul 2 02:11:36 PDT 2023
Ending: Mon Jul 31 23:37:21 PDT 2023
Messages: 618

• [PATCH v3 0/5] meson saradc: add iio channels to read channel 7 mux inputs   Jonathan Cameron
• [PATCH v3 1/5] meson saradc: move enums declaration before variables declaration   Jonathan Cameron
  • [PATCH v3 1/5] meson saradc: move enums declaration before variables declaration   George Stark
• [PATCH v3 4/5] meson saradc: add channel labels   Jonathan Cameron
  • [PATCH v3 4/5] meson saradc: add channel labels   George Stark
• [PATCH v3 5/5] meson saradc: support reading from channel 7 mux inputs   Jonathan Cameron
  • [PATCH v3 5/5] meson saradc: support reading from channel 7 mux inputs   Martin Blumenstingl
    • [PATCH v3 5/5] meson saradc: support reading from channel 7 mux inputs   George Stark
    • [PATCH v3 5/5] meson saradc: support reading from channel 7 mux inputs   Jonathan Cameron
• [PATCH 1/3] dt-bindings: reset: Add compatible and DT bindings for Meson-C3 Reset Controller   Krzysztof Kozlowski
• [PATCH] dt-bindings: cleanup DTS example whitespaces   Krzysztof Kozlowski
  • [PATCH] dt-bindings: cleanup DTS example whitespaces   Mike Leach
  • [PATCH] dt-bindings: cleanup DTS example whitespaces   Jonathan Cameron
  • [PATCH] dt-bindings: cleanup DTS example whitespaces   Neil Armstrong
  • [PATCH] dt-bindings: cleanup DTS example whitespaces   Mathieu Poirier
  • [PATCH] dt-bindings: cleanup DTS example whitespaces   Conor Dooley
  • [PATCH] dt-bindings: cleanup DTS example whitespaces   Vinod Koul
  • [PATCH] dt-bindings: cleanup DTS example whitespaces   Matthias Brugger
  • [PATCH] dt-bindings: cleanup DTS example whitespaces   Dmitry Baryshkov
  • [PATCH] dt-bindings: cleanup DTS example whitespaces   Jonas Gorski
  • [PATCH] dt-bindings: cleanup DTS example whitespaces   Rob Herring
• [PATCH] arm64: dts: amlogic: minor whitespace cleanup around '='   Krzysztof Kozlowski
  • [PATCH] arm64: dts: amlogic: minor whitespace cleanup around '='   Neil Armstrong
  • [PATCH] arm64: dts: amlogic: minor whitespace cleanup around '='   Neil Armstrong
• [PATCH v7 4/4] arm64: dts: amlogic-t7-a311d2-khadas-vim4: add initial device-tree   Xianwei Zhao
  • [PATCH v7 4/4] arm64: dts: amlogic-t7-a311d2-khadas-vim4: add initial device-tree   Neil Armstrong
  • [PATCH v7 4/4] arm64: dts: amlogic-t7-a311d2-khadas-vim4: add initial device-tree   Neil Armstrong
• [PATCH v6 5/9] drm/meson: gate px_clk when setting rate   Neil Armstrong
• [PATCH 0/3] Power: C3: add power domain driver   =Xianwei Zhao
  • [PATCH 1/3] dt-bindings: power: add Amlogic C3 power domains   =Xianwei Zhao
    • [PATCH 1/3] dt-bindings: power: add Amlogic C3 power domains   Krzysztof Kozlowski
      • [PATCH 1/3] dt-bindings: power: add Amlogic C3 power domains   Xianwei Zhao
  • [PATCH 2/3] soc: c3: Add support for power domains controller   =Xianwei Zhao
    • [PATCH 2/3] soc: c3: Add support for power domains controller   Neil Armstrong
      • [PATCH 2/3] soc: c3: Add support for power domains controller   Dmitry Rokosov
      • [PATCH 2/3] soc: c3: Add support for power domains controller   Xianwei Zhao
      • [PATCH 2/3] soc: c3: Add support for power domains controller   Xianwei Zhao
  • [PATCH 3/3] arm64: dts: add support for C3 power domain controller   =Xianwei Zhao
    • [PATCH 3/3] arm64: dts: add support for C3 power domain controller   Krzysztof Kozlowski
      • [PATCH 3/3] arm64: dts: add support for C3 power domain controller   Xianwei Zhao
• (subset) [PATCH v7 0/4] Add Amlogic A311D2 and Khadas Vim4 Board Support   Neil Armstrong
• [PATCH v1 0/2] spi: amlogic-spifc-a1: fixes and improvements for amlogic-spifc-a1   Martin Kurbanov
  • [PATCH v1 1/2] spi: amlogic-spifc-a1: implement adjust_op_size()   Martin Kurbanov
    • [PATCH v1 1/2] spi: amlogic-spifc-a1: implement adjust_op_size()   andy.shevchenko at gmail.com
  • [PATCH v1 2/2] spi: amlogic-spifc-a1: add support for max_speed_hz   Martin Kurbanov
    • [PATCH v1 2/2] spi: amlogic-spifc-a1: add support for max_speed_hz   andy.shevchenko at gmail.com
  • [PATCH v1 0/2] spi: amlogic-spifc-a1: fixes and improvements for amlogic-spifc-a1   Mark Brown
• [PATCH v7 0/4] Add Amlogic A311D2 and Khadas Vim4 Board Support   Neil Armstrong
• [PATCH 2/3] reset: reset-meson: add support for the Meson-C3 SoC Reset Controller   Martin Blumenstingl
• [PATCH v1] clk: meson: change usleep_range() to udelay() for atomic context   Dmitry Rokosov
  • [PATCH v1] clk: meson: change usleep_range() to udelay() for atomic context   Jerome Brunet
    • [PATCH v1] clk: meson: change usleep_range() to udelay() for atomic context   Dmitry Rokosov
      • [PATCH v1] clk: meson: change usleep_range() to udelay() for atomic context   Jerome Brunet
• [PATCH] mmc: meson-mx-sdhc: Fix initialization frozen issue   Martin Blumenstingl
  • [PATCH] mmc: meson-mx-sdhc: Fix initialization frozen issue   Ziyang Huang
• [PATCH 0/2] Devicetree for board AN400 based Amlogic T7 SoC   Xianwei Zhao
  • [PATCH 1/2] dt-bindings: arm: amlogic: add board AN400   Xianwei Zhao
    • [PATCH 1/2] dt-bindings: arm: amlogic: add board AN400   Krzysztof Kozlowski
  • [PATCH 2/2] arm64: dts: add board AN400   Xianwei Zhao
    • [PATCH 2/2] arm64: dts: add board AN400   Neil Armstrong
      • [PATCH 2/2] arm64: dts: add board AN400   Xianwei Zhao
  • [PATCH 0/2] Devicetree for board AN400 based Amlogic T7 SoC   Neil Armstrong
• [RFC PATCH v1 1/2] dt-bindings: nand: meson: support for 512B ECC step size   Miquel Raynal
• [RFC PATCH v1 2/2] mtd: rawnand: meson: support for 512B ECC step size   Miquel Raynal
  • [RFC PATCH v1 2/2] mtd: rawnand: meson: support for 512B ECC step size   Arseniy Krasnov
    • [RFC PATCH v1 2/2] mtd: rawnand: meson: support for 512B ECC step size   Miquel Raynal
      • [RFC PATCH v1 2/2] mtd: rawnand: meson: support for 512B ECC step size   Arseniy Krasnov
      • [RFC PATCH v1 2/2] mtd: rawnand: meson: support for 512B ECC step size   Miquel Raynal
      • [RFC PATCH v1 2/2] mtd: rawnand: meson: support for 512B ECC step size   Arseniy Krasnov
      • [RFC PATCH v1 2/2] mtd: rawnand: meson: support for 512B ECC step size   Miquel Raynal
      • [RFC PATCH v1 2/2] mtd: rawnand: meson: support for 512B ECC step size   Arseniy Krasnov
      • [RFC PATCH v1 2/2] mtd: rawnand: meson: support for 512B ECC step size   Miquel Raynal
      • [RFC PATCH v1 2/2] mtd: rawnand: meson: support for 512B ECC step size   Arseniy Krasnov
• [PATCH 2/7] reset: meson-audio-arb: Convert to devm_platform_ioremap_resource()   Yangtao Li
  • [PATCH 2/7] reset: meson-audio-arb: Convert to devm_platform_ioremap_resource()   Neil Armstrong
• [PATCH v3 2/2] mtd: rawnand: meson: waiting w/o wired ready/busy pin   Miquel Raynal
  • [PATCH v3 2/2] mtd: rawnand: meson: waiting w/o wired ready/busy pin   Arseniy Krasnov
    • [PATCH v3 2/2] mtd: rawnand: meson: waiting w/o wired ready/busy pin   Miquel Raynal
      • [PATCH v3 2/2] mtd: rawnand: meson: waiting w/o wired ready/busy pin   Arseniy Krasnov
      • [PATCH v3 2/2] mtd: rawnand: meson: waiting w/o wired ready/busy pin   Arseniy Krasnov
      • [PATCH v3 2/2] mtd: rawnand: meson: waiting w/o wired ready/busy pin   Miquel Raynal
• [PATCH v1 0/5] tty: serial: meson: support ttyS devname   Dmitry Rokosov
  • [PATCH v1 2/5] tty: serial: meson: redesign the module to platform_driver   Dmitry Rokosov
    • [PATCH v1 2/5] tty: serial: meson: redesign the module to platform_driver   neil.armstrong at linaro.org
      • [PATCH v1 2/5] tty: serial: meson: redesign the module to platform_driver   Dmitry Rokosov
      • [PATCH v1 2/5] tty: serial: meson: redesign the module to platform_driver   Dmitry Rokosov
  • [PATCH v1 3/5] tty: serial: meson: apply ttyS devname instead of ttyAML for new SoCs   Dmitry Rokosov
    • [PATCH v1 3/5] tty: serial: meson: apply ttyS devname instead of ttyAML for new SoCs   neil.armstrong at linaro.org
      • [PATCH v1 3/5] tty: serial: meson: apply ttyS devname instead of ttyAML for new SoCs   Dmitry Rokosov
      • [PATCH v1 3/5] tty: serial: meson: apply ttyS devname instead of ttyAML for new SoCs   neil.armstrong at linaro.org
      • [PATCH v1 3/5] tty: serial: meson: apply ttyS devname instead of ttyAML for new SoCs   Dmitry Rokosov
    • [PATCH v1 3/5] tty: serial: meson: apply ttyS devname instead of ttyAML for new SoCs   Conor Dooley
      • [PATCH v1 3/5] tty: serial: meson: apply ttyS devname instead of ttyAML for new SoCs   Dmitry Rokosov
      • [PATCH v1 3/5] tty: serial: meson: apply ttyS devname instead of ttyAML for new SoCs   Conor Dooley
  • [PATCH v1 4/5] dt-bindings: serial: amlogic,meson-uart: support Amlogic A1   Dmitry Rokosov
    • [PATCH v1 4/5] dt-bindings: serial: amlogic,meson-uart: support Amlogic A1   Rob Herring
  • [PATCH v1 5/5] arm64: dts: meson: a1: change uart compatible string   Dmitry Rokosov
    • [PATCH v1 5/5] arm64: dts: meson: a1: change uart compatible string   Conor Dooley
      • [PATCH v1 5/5] arm64: dts: meson: a1: change uart compatible string   Dmitry Rokosov
      • [PATCH v1 5/5] arm64: dts: meson: a1: change uart compatible string   Conor Dooley
      • [PATCH v1 5/5] arm64: dts: meson: a1: change uart compatible string   Dmitry Rokosov
      • [PATCH v1 5/5] arm64: dts: meson: a1: change uart compatible string   Dmitry Rokosov
• [PATCH v1 1/5] tty: serial: meson: use dev_err_probe   Dmitry Rokosov
• [PATCH 1/3] PCI: meson: Remove cast between incompatible function type   Krzysztof Wilczyński
• [PATCH v2] clk: meson: change usleep_range() to udelay() for atomic context   Dmitry Rokosov
  • [PATCH v2] clk: meson: change usleep_range() to udelay() for atomic context   Jerome Brunet
• [PATCH v1] mtd: rawnand: meson: fix OOB available bytes for ECC   Arseniy Krasnov
  • [PATCH v1] mtd: rawnand: meson: fix OOB available bytes for ECC   Miquel Raynal
• [RFC PATCH v2 0/2] support 512B ECC step size for Meson NAND   Arseniy Krasnov
  • [RFC PATCH v2 1/2] dt-bindings: nand: meson: support for 512B ECC step size   Arseniy Krasnov
    • [RFC PATCH v2 1/2] dt-bindings: nand: meson: support for 512B ECC step size   Miquel Raynal
      • [RFC PATCH v2 1/2] dt-bindings: nand: meson: support for 512B ECC step size   Arseniy Krasnov
      • [RFC PATCH v2 1/2] dt-bindings: nand: meson: support for 512B ECC step size   Miquel Raynal
      • [RFC PATCH v2 1/2] dt-bindings: nand: meson: support for 512B ECC step size   Arseniy Krasnov
      • [RFC PATCH v2 1/2] dt-bindings: nand: meson: support for 512B ECC step size   Miquel Raynal
    • [RFC PATCH v2 1/2] dt-bindings: nand: meson: support for 512B ECC step size   Rob Herring
  • [RFC PATCH v2 2/2] mtd: rawnand: meson: support for 512B ECC step size   Arseniy Krasnov
• [PATCH v1 0/2] use NAND core API for Meson controller   Arseniy Krasnov
  • [PATCH v1 1/2] mtd: rawnand: export 'nand_exit_status_op()'   Arseniy Krasnov
    • [PATCH v1 1/2] mtd: rawnand: export 'nand_exit_status_op()'   Miquel Raynal
  • [PATCH v1 2/2] mtd: rawnand: meson: use NAND core API to check status   Arseniy Krasnov
    • [PATCH v1 2/2] mtd: rawnand: meson: use NAND core API to check status   Miquel Raynal
• [PATCH v2 0/3] dt-bindings: second batch of dt-schema conversions for Amlogic Meson bindings   Neil Armstrong
  • [PATCH v2 2/3] dt-bindings: clock: amlogic: convert amlogic,gxbb-aoclkc.txt to dt-schema   Neil Armstrong
    • [PATCH v2 2/3] dt-bindings: clock: amlogic: convert amlogic,gxbb-aoclkc.txt to dt-schema   Rob Herring
      • [PATCH v2 2/3] dt-bindings: clock: amlogic: convert amlogic,gxbb-aoclkc.txt to dt-schema   Jerome Brunet
      • [PATCH v2 2/3] dt-bindings: clock: amlogic: convert amlogic,gxbb-aoclkc.txt to dt-schema   Krzysztof Kozlowski
      • [PATCH v2 2/3] dt-bindings: clock: amlogic: convert amlogic,gxbb-aoclkc.txt to dt-schema   Jerome Brunet
  • [PATCH v2 3/3] dt-bindings: soc: amlogic: document System Control registers   Neil Armstrong
    • [PATCH v2 3/3] dt-bindings: soc: amlogic: document System Control registers   Rob Herring
• [PATCH v2 1/3] dt-bindings: clock: amlogic: convert amlogic,gxbb-clkc.txt to dt-schema   Neil Armstrong
  • [PATCH v2 1/3] dt-bindings: clock: amlogic: convert amlogic,gxbb-clkc.txt to dt-schema   Rob Herring
• [PATCH v2 0/7] tty: serial: meson: support ttyS devname   Dmitry Rokosov
  • [PATCH v2 1/7] tty: serial: meson: use dev_err_probe   Dmitry Rokosov
    • [PATCH v2 1/7] tty: serial: meson: use dev_err_probe   neil.armstrong at linaro.org
  • [PATCH v2 3/7] tty: serial: meson: apply ttyS devname instead of ttyAML for new SoCs   Dmitry Rokosov
    • [PATCH v2 3/7] tty: serial: meson: apply ttyS devname instead of ttyAML for new SoCs   neil.armstrong at linaro.org
  • [PATCH v2 5/7] tty: serial: meson: add independent uart_data for A1 SoC family   Dmitry Rokosov
    • [PATCH v2 5/7] tty: serial: meson: add independent uart_data for A1 SoC family   neil.armstrong at linaro.org
  • [PATCH v2 6/7] dt-bindings: serial: amlogic,meson-uart: support Amlogic A1   Dmitry Rokosov
    • [PATCH v2 6/7] dt-bindings: serial: amlogic,meson-uart: support Amlogic A1   Conor Dooley
    • [PATCH v2 6/7] dt-bindings: serial: amlogic,meson-uart: support Amlogic A1   Rob Herring
  • [PATCH v2 7/7] arm64: dts: meson: a1: change uart compatible string   Dmitry Rokosov
    • [PATCH v2 7/7] arm64: dts: meson: a1: change uart compatible string   neil.armstrong at linaro.org
• [PATCH v2 2/7] tty: serial: meson: redesign the module to platform_driver   Dmitry Rokosov
  • [PATCH v2 2/7] tty: serial: meson: redesign the module to platform_driver   neil.armstrong at linaro.org
• [PATCH v2 4/7] tty: serial: meson: introduce separate uart_data for S4 SoC family   Dmitry Rokosov
  • [PATCH v2 4/7] tty: serial: meson: introduce separate uart_data for S4 SoC family   neil.armstrong at linaro.org
• [PATCH 4/8] nvmem: meson-mx-efuse: Convert to devm_platform_ioremap_resource()   Yangtao Li
• [PATCH 0/2] dt-bindings: pinctrl: amlogic,meson-pinctrl-common: add missing properties   Neil Armstrong
  • [PATCH 1/2] dt-bindings: pinctrl: amlogic,meson-pinctrl-common: allow gpio-line-names   Neil Armstrong
    • [PATCH 1/2] dt-bindings: pinctrl: amlogic,meson-pinctrl-common: allow gpio-line-names   Rob Herring
  • [PATCH 2/2] dt-bindings: pinctrl: amlogic,meson-pinctrl-common: allow gpio hogs   Neil Armstrong
    • [PATCH 2/2] dt-bindings: pinctrl: amlogic,meson-pinctrl-common: allow gpio hogs   Rob Herring
• [PATCH 0/3] arm64: meson: bunch of DT fixes, take 3   Neil Armstrong
  • [PATCH 2/3] arm64: dtb: amlogic: meson-g12-common: change aobus-pinctrl node name   Neil Armstrong
  • [PATCH 3/3] arm64: dts: amlogic: drop cooling-[min|max]-state from pwm-fan   Neil Armstrong
  • [PATCH 0/3] arm64: meson: bunch of DT fixes, take 3   Neil Armstrong
• [PATCH 1/3] arm64: dts: amlogic: meson-g12b-odroid-n2: fix usb hub hog name   Neil Armstrong
• [PATCH V2 0/2] Devicetree for board AN400 based Amlogic T7 SoC   Xianwei Zhao
  • [PATCH V2] dt-bindings: arm: amlogic: add board AN400   Xianwei Zhao
  • [PATCH V2 2/2] arm64: dts: add board AN400   Xianwei Zhao
  • [PATCH V2 0/2] Devicetree for board AN400 based Amlogic T7 SoC   Neil Armstrong
• [PATCH v2 0/2] spi: amlogic-spifc-a1: fixes and improvements for amlogic-spifc-a1   Martin Kurbanov
  • [PATCH v2 0/2] spi: amlogic-spifc-a1: fixes and improvements for amlogic-spifc-a1   Mark Brown
• [PATCH v2 1/2] spi: amlogic-spifc-a1: implement adjust_op_size()   Martin Kurbanov
  • [PATCH v2 1/2] spi: amlogic-spifc-a1: implement adjust_op_size()   Neil Armstrong
• [PATCH v2 2/2] spi: amlogic-spifc-a1: add support for max_speed_hz   Martin Kurbanov
  • [PATCH v2 2/2] spi: amlogic-spifc-a1: add support for max_speed_hz   Neil Armstrong
  • [PATCH v2 2/2] spi: amlogic-spifc-a1: add support for max_speed_hz   Jerome Brunet
    • [PATCH v2 2/2] spi: amlogic-spifc-a1: add support for max_speed_hz   Martin Kurbanov
      • [PATCH v2 2/2] spi: amlogic-spifc-a1: add support for max_speed_hz   Mark Brown
      • [PATCH v2 2/2] spi: amlogic-spifc-a1: add support for max_speed_hz   Martin Kurbanov
• [PATCH 0/2] Add pinctrl driver support for Amlogic C3 SoCs   Huqiang Qin
  • [PATCH 1/2] dt-bindings: gpio: Add a header file for Amlogic C3 SoCs   Huqiang Qin
  • [PATCH 2/2] pinctrl: Add driver support for Amlogic C3 SoCs   Huqiang Qin
    • [PATCH 2/2] pinctrl: Add driver support for Amlogic C3 SoCs   Andy Shevchenko
      • [PATCH 2/2] pinctrl: Add driver support for Amlogic C3 SoCs   Huqiang Qin
• [PATCH v3 0/3] dt-bindings: second batch of dt-schema conversions for Amlogic Meson bindings   Neil Armstrong
  • [PATCH v3 1/3] dt-bindings: clock: amlogic: convert amlogic,gxbb-clkc.txt to dt-schema   Neil Armstrong
  • [PATCH v3 2/3] dt-bindings: clock: amlogic: convert amlogic,gxbb-aoclkc.txt to dt-schema   Neil Armstrong
    • [PATCH v3 2/3] dt-bindings: clock: amlogic: convert amlogic,gxbb-aoclkc.txt to dt-schema   Rob Herring
  • [PATCH v3 3/3] dt-bindings: soc: amlogic: document System Control registers   Neil Armstrong
• [PATCH V2 0/4] Power: C3: add power domain driver   Xianwei Zhao
  • [PATCH V2 1/4] soc: amlogic: use name instead of index as criterion   Xianwei Zhao
    • [PATCH V2 1/4] soc: amlogic: use name instead of index as criterion   Neil Armstrong
    • [PATCH V2 1/4] soc: amlogic: use name instead of index as criterion   Dmitry Rokosov
  • [PATCH V2 2/4] dt-bindings: power: add Amlogic C3 power domains   Xianwei Zhao
    • [PATCH V2 2/4] dt-bindings: power: add Amlogic C3 power domains   Rob Herring
  • [PATCH V2 3/4] soc: c3: Add support for power domains controller   Xianwei Zhao
    • [PATCH V2 3/4] soc: c3: Add support for power domains controller   Neil Armstrong
    • [PATCH V2 3/4] soc: c3: Add support for power domains controller   Kevin Hilman
      • [PATCH V2 3/4] soc: c3: Add support for power domains controller   Xianwei Zhao
  • [PATCH V2 4/4] arm64: dts: add support for C3 power domain controller   Xianwei Zhao
    • [PATCH V2 4/4] arm64: dts: add support for C3 power domain controller   Neil Armstrong
  • (subset) [PATCH V2 0/4] Power: C3: add power domain driver   Neil Armstrong
  • (subset) [PATCH V2 0/4] Power: C3: add power domain driver   Neil Armstrong
• [PATCH v2 0/2] dt-bindings: pinctrl: amlogic,meson-pinctrl-common: add missing properties   Neil Armstrong
  • [PATCH v2 1/2] dt-bindings: pinctrl: amlogic,meson-pinctrl: allow gpio-line-names   Neil Armstrong
    • [PATCH v2 1/2] dt-bindings: pinctrl: amlogic,meson-pinctrl: allow gpio-line-names   Rob Herring
  • [PATCH v2 2/2] dt-bindings: pinctrl: amlogic,meson-pinctrl-common: allow gpio hogs   Neil Armstrong
  • [PATCH v2 0/2] dt-bindings: pinctrl: amlogic,meson-pinctrl-common: add missing properties   Linus Walleij
• [PATCH 03/18] soc: amlogic: Move power-domain drivers to the genpd dir   Ulf Hansson
  • [PATCH 03/18] soc: amlogic: Move power-domain drivers to the genpd dir   Neil Armstrong
    • [PATCH 03/18] soc: amlogic: Move power-domain drivers to the genpd dir   Ulf Hansson
      • [PATCH 03/18] soc: amlogic: Move power-domain drivers to the genpd dir   neil.armstrong at linaro.org
      • [PATCH 03/18] soc: amlogic: Move power-domain drivers to the genpd dir   Ulf Hansson
      • [PATCH 03/18] soc: amlogic: Move power-domain drivers to the genpd dir   Bjorn Andersson
      • [PATCH 03/18] soc: amlogic: Move power-domain drivers to the genpd dir   Ulf Hansson
      • [PATCH 03/18] soc: amlogic: Move power-domain drivers to the genpd dir   Arnd Bergmann
      • [PATCH 03/18] soc: amlogic: Move power-domain drivers to the genpd dir   Bjorn Andersson
      • [PATCH 03/18] soc: amlogic: Move power-domain drivers to the genpd dir   Ulf Hansson
      • [PATCH 03/18] soc: amlogic: Move power-domain drivers to the genpd dir   Bjorn Andersson
      • [PATCH 03/18] soc: amlogic: Move power-domain drivers to the genpd dir   Arnd Bergmann
  • [PATCH 03/18] soc: amlogic: Move power-domain drivers to the genpd dir   Martin Blumenstingl
    • [PATCH 03/18] soc: amlogic: Move power-domain drivers to the genpd dir   Ulf Hansson
• [PATCH v4 0/6] iio: adc: meson: add iio channels to read channel 7 mux inputs   George Stark
  • [PATCH v4 4/6] iio: adc: meson: add enum for iio channel numbers   George Stark
  • [PATCH v4 0/6] iio: adc: meson: add iio channels to read channel 7 mux inputs   Jonathan Cameron
    • [PATCH v4 0/6] iio: adc: meson: add iio channels to read channel 7 mux inputs   Andy Shevchenko
• [PATCH v4 1/6] iio: adc: meson: remove unused timestamp channel   George Stark
• [PATCH v4 2/6] iio: adc: meson: move enums declaration before variables declaration   George Stark
  • [PATCH v4 2/6] iio: adc: meson: move enums declaration before variables declaration   Andy Shevchenko
• [PATCH v4 3/6] iio: adc: meson: move meson_sar_adc_set_chan7_mux routine upper   George Stark
  • [PATCH v4 3/6] iio: adc: meson: move meson_sar_adc_set_chan7_mux routine upper   Andy Shevchenko
• [PATCH v4 5/6] iio: adc: meson: add channel labels   George Stark
  • [PATCH v4 5/6] iio: adc: meson: add channel labels   Andy Shevchenko
• [PATCH v4 6/6] iio: adc: meson: support reading from channel 7 mux inputs   George Stark
  • [PATCH v4 6/6] iio: adc: meson: support reading from channel 7 mux inputs   Andy Shevchenko
• [PATCH V2 0/2] Add pinctrl driver support for Amlogic C3 SoCs   Huqiang Qin
  • [PATCH V2 1/2] dt-bindings: gpio: Add a header file for Amlogic C3 SoCs   Huqiang Qin
    • [PATCH V2 1/2] dt-bindings: gpio: Add a header file for Amlogic C3 SoCs   Bartosz Golaszewski
    • [PATCH V2 1/2] dt-bindings: gpio: Add a header file for Amlogic C3 SoCs   Conor Dooley
      • [PATCH V2 1/2] dt-bindings: gpio: Add a header file for Amlogic C3 SoCs   Huqiang Qin
      • [PATCH V2 1/2] dt-bindings: gpio: Add a header file for Amlogic C3 SoCs   Conor Dooley
      • [PATCH V2 1/2] dt-bindings: gpio: Add a header file for Amlogic C3 SoCs   Krzysztof Kozlowski
      • [PATCH V2 1/2] dt-bindings: gpio: Add a header file for Amlogic C3 SoCs   Kelvin Zhang
  • [PATCH V2 2/2] pinctrl: Add driver support for Amlogic C3 SoCs   Huqiang Qin
    • [PATCH V2 2/2] pinctrl: Add driver support for Amlogic C3 SoCs   Andy Shevchenko
      • [PATCH V2 2/2] pinctrl: Add driver support for Amlogic C3 SoCs   Huqiang Qin
  • [PATCH V2 0/2] Add pinctrl driver support for Amlogic C3 SoCs   Andy Shevchenko
    • [PATCH V2 0/2] Add pinctrl driver support for Amlogic C3 SoCs   Huqiang Qin
• [PATCH v1 0/8] spi: Header and core clean up and refactoring   Andy Shevchenko
  • [PATCH v1 1/8] spi: Remove unneeded OF node NULL checks   Andy Shevchenko
  • [PATCH v1 3/8] spi: Use sysfs_emit() to instead of s*printf()   Andy Shevchenko
  • [PATCH v1 4/8] spi: Get rid of old SPI_MASTER_NO_.X and SPI_MASTER_MUST_.X   Andy Shevchenko
    • [PATCH v1 4/8] spi: Get rid of old SPI_MASTER_NO_.X and SPI_MASTER_MUST_.X   Mark Brown
      • [PATCH v1 4/8] spi: Get rid of old SPI_MASTER_NO_.X and SPI_MASTER_MUST_.X   Andy Shevchenko
      • [PATCH v1 4/8] spi: Get rid of old SPI_MASTER_NO_.X and SPI_MASTER_MUST_.X   Mark Brown
      • [PATCH v1 4/8] spi: Get rid of old SPI_MASTER_NO_.X and SPI_MASTER_MUST_.X   Andy Shevchenko
      • [PATCH v1 4/8] spi: Get rid of old SPI_MASTER_NO_.X and SPI_MASTER_MUST_.X   Andy Shevchenko
      • [PATCH v1 4/8] spi: Get rid of old SPI_MASTER_NO_.X and SPI_MASTER_MUST_.X   Mark Brown
      • [PATCH v1 4/8] spi: Get rid of old SPI_MASTER_NO_.X and SPI_MASTER_MUST_.X   Andy Shevchenko
      • [PATCH v1 4/8] spi: Get rid of old SPI_MASTER_NO_.X and SPI_MASTER_MUST_.X   Mark Brown
      • [PATCH v1 4/8] spi: Get rid of old SPI_MASTER_NO_.X and SPI_MASTER_MUST_.X   Andy Shevchenko
  • [PATCH v1 5/8] spi: Sort headers alphabetically   Andy Shevchenko
  • [PATCH v1 6/8] spi: Clean up headers   Andy Shevchenko
  • [PATCH v1 7/8] spi: Fix spelling typos and acronyms capitalization   Andy Shevchenko
  • [PATCH v1 8/8] spi: Use struct_size() helper   Andy Shevchenko
  • [PATCH v1 0/8] spi: Header and core clean up and refactoring   Andy Shevchenko
• [PATCH v1 2/8] spi: Drop duplicate IDR allocation code in spi_register_controller()   Andy Shevchenko
• [PATCH v2 00/15] spi: Header and core clean up and refactoring   Andy Shevchenko
  • [PATCH v2 07/15] spi: Sort headers alphabetically   Andy Shevchenko
  • [PATCH v2 08/15] spi: Clean up headers   Andy Shevchenko
    • [PATCH v2 08/15] spi: Clean up headers   Mark Brown
      • [PATCH v2 08/15] spi: Clean up headers   Andy Shevchenko
    • [PATCH v2 08/15] spi: Clean up headers   Mark Brown
      • [PATCH v2 08/15] spi: Clean up headers   Andy Shevchenko
  • [PATCH v2 09/15] spi: Use struct_size() helper   Andy Shevchenko
    • [PATCH v2 09/15] spi: Use struct_size() helper   Marc Kleine-Budde
      • [PATCH v2 09/15] spi: Use struct_size() helper   Andy Shevchenko
      • [PATCH v2 09/15] spi: Use struct_size() helper   Andy Shevchenko
  • [PATCH v2 10/15] spi: Use predefined constants from bits.h and units.h   Andy Shevchenko
  • [PATCH v2 11/15] spi: Get rid of old SPI_MASTER_NO_TX & SPI_MASTER_NO_RX   Andy Shevchenko
  • [PATCH v2 12/15] spi: Get rid of old SPI_MASTER_MUST_TX & SPI_MASTER_MUST_RX   Andy Shevchenko
  • [PATCH v2 13/15] spi: Rename SPI_MASTER_GPIO_SS to SPI_CONTROLLER_GPIO_SS   Andy Shevchenko
    • [PATCH v2 13/15] spi: Rename SPI_MASTER_GPIO_SS to SPI_CONTROLLER_GPIO_SS   Serge Semin
      • [PATCH v2 13/15] spi: Rename SPI_MASTER_GPIO_SS to SPI_CONTROLLER_GPIO_SS   Andy Shevchenko
  • [PATCH v2 14/15] spi: Convert to SPI_CONTROLLER_HALF_DUPLEX   Andy Shevchenko
  • [PATCH v2 15/15] spi: Fix spelling typos and acronyms capitalization   Andy Shevchenko
  • [PATCH v2 00/15] spi: Header and core clean up and refactoring   Mark Brown
    • [PATCH v2 00/15] spi: Header and core clean up and refactoring   Andy Shevchenko
      • [PATCH v2 00/15] spi: Header and core clean up and refactoring   Mark Brown
      • [PATCH v2 00/15] spi: Header and core clean up and refactoring   Andy Shevchenko
  • (subset) [PATCH v2 00/15] spi: Header and core clean up and refactoring   Mark Brown
• [PATCH v2 01/15] spi: Remove unneeded OF node NULL checks   Andy Shevchenko
  • [PATCH v2 01/15] spi: Remove unneeded OF node NULL checks   AngeloGioacchino Del Regno
    • [PATCH v2 01/15] spi: Remove unneeded OF node NULL checks   Andy Shevchenko
• [PATCH v2 02/15] spi: Drop duplicate IDR allocation code in spi_register_controller()   Andy Shevchenko
  • [PATCH v2 02/15] spi: Drop duplicate IDR allocation code in spi_register_controller()   Mark Brown
    • [PATCH v2 02/15] spi: Drop duplicate IDR allocation code in spi_register_controller()   Andy Shevchenko
• [PATCH v2 03/15] spi: Replace if-else-if by bitops and multiplications   Andy Shevchenko
  • [PATCH v2 03/15] spi: Replace if-else-if by bitops and multiplications   Mark Brown
    • [PATCH v2 03/15] spi: Replace if-else-if by bitops and multiplications   Andy Shevchenko
• [PATCH v2 04/15] spi: Replace open coded spi_controller_xfer_timeout()   Andy Shevchenko
  • [PATCH v2 04/15] spi: Replace open coded spi_controller_xfer_timeout()   Mark Brown
    • [PATCH v2 04/15] spi: Replace open coded spi_controller_xfer_timeout()   Andy Shevchenko
      • [PATCH v2 04/15] spi: Replace open coded spi_controller_xfer_timeout()   Mark Brown
      • [PATCH v2 04/15] spi: Replace open coded spi_controller_xfer_timeout()   Andy Shevchenko
      • [PATCH v2 04/15] spi: Replace open coded spi_controller_xfer_timeout()   Mark Brown
  • [PATCH v2 04/15] spi: Replace open coded spi_controller_xfer_timeout()   AngeloGioacchino Del Regno
    • [PATCH v2 04/15] spi: Replace open coded spi_controller_xfer_timeout()   Mark Brown
      • [PATCH v2 04/15] spi: Replace open coded spi_controller_xfer_timeout()   AngeloGioacchino Del Regno
• [PATCH v2 05/15] spi: Remove code duplication in spi_add_device_locked()   Andy Shevchenko
  • [PATCH v2 05/15] spi: Remove code duplication in spi_add_device_locked()   Mark Brown
    • [PATCH v2 05/15] spi: Remove code duplication in spi_add_device_locked()   Andy Shevchenko
      • [PATCH v2 05/15] spi: Remove code duplication in spi_add_device_locked()   Sebastian Reichel
      • [PATCH v2 05/15] spi: Remove code duplication in spi_add_device_locked()   Andy Shevchenko
• [PATCH v2 06/15] spi: Use sysfs_emit() to instead of s*printf()   Andy Shevchenko
• [RFC PATCH v3 0/3] support 512B ECC step size for Meson NAND   Arseniy Krasnov
  • [RFC PATCH v3 0/3] support 512B ECC step size for Meson NAND   Miquel Raynal
    • [RFC PATCH v3 0/3] support 512B ECC step size for Meson NAND   Arseniy Krasnov
      • [RFC PATCH v3 0/3] support 512B ECC step size for Meson NAND   Miquel Raynal
• [RFC PATCH v3 1/3] dt-bindings: nand: meson: support for 512B ECC step size   Arseniy Krasnov
  • [RFC PATCH v3 1/3] dt-bindings: nand: meson: support for 512B ECC step size   Miquel Raynal
• [RFC PATCH v3 2/3] dt-bindings: nand: meson: make ECC properties dependent   Arseniy Krasnov
  • [RFC PATCH v3 2/3] dt-bindings: nand: meson: make ECC properties dependent   Rob Herring
    • [RFC PATCH v3 2/3] dt-bindings: nand: meson: make ECC properties dependent   Arseniy Krasnov
  • [RFC PATCH v3 2/3] dt-bindings: nand: meson: make ECC properties dependent   Rob Herring
• [RFC PATCH v3 3/3] mtd: rawnand: meson: support for 512B ECC step size   Arseniy Krasnov
• [PATCH 2/2] thermal/drivers/amlogic: Remove redundant msg in amlogic_thermal_probe()   Yangtao Li
• [PATCH v2 03/18] soc: amlogic: Move power-domain drivers to the genpd dir   Ulf Hansson
• [PATCH v3 00/14] spi: Header and core clean up and refactoring   Andy Shevchenko
  • [PATCH v3 02/14] spi: Deduplicate IDR allocation code in spi_register_controller()   Andy Shevchenko
  • [PATCH v3 03/14] spi: Refactor bus number assigning code in spi_register_controller()   Andy Shevchenko
  • [PATCH v3 04/14] spi: Remove code duplication in spi_add_device*()   Andy Shevchenko
    • [PATCH v3 04/14] spi: Remove code duplication in spi_add_device*()   Sebastian Reichel
  • [PATCH v3 05/14] spi: Kill spi_add_device_locked()   Andy Shevchenko
  • [PATCH v3 06/14] spi: Use sysfs_emit() to instead of s*printf()   Andy Shevchenko
  • [PATCH v3 08/14] spi: Sort headers alphabetically   Andy Shevchenko
  • [PATCH v3 10/14] spi: Get rid of old SPI_MASTER_NO_TX & SPI_MASTER_NO_RX   Andy Shevchenko
  • [PATCH v3 11/14] spi: Get rid of old SPI_MASTER_MUST_TX & SPI_MASTER_MUST_RX   Andy Shevchenko
  • [PATCH v3 13/14] spi: Convert to SPI_CONTROLLER_HALF_DUPLEX   Andy Shevchenko
• [PATCH v3 01/14] spi: Remove unneeded OF node NULL checks   Andy Shevchenko
• [PATCH v3 07/14] spi: Use BITS_TO_BYTES()   Andy Shevchenko
• [PATCH v3 09/14] spi: Use struct_size() helper   Andy Shevchenko
• [PATCH v3 12/14] spi: Rename SPI_MASTER_GPIO_SS to SPI_CONTROLLER_GPIO_SS   Andy Shevchenko
• [PATCH v3 14/14] spi: Fix spelling typos and acronyms capitalization   Andy Shevchenko
• [PATCH v5 0/6] iio: adc: meson: add iio channels to read channel 7 mux inputs   George Stark
  • [PATCH v5 0/6] iio: adc: meson: add iio channels to read channel 7 mux inputs   Andy Shevchenko
    • [PATCH v5 0/6] iio: adc: meson: add iio channels to read channel 7 mux inputs   George Stark
      • [PATCH v5 0/6] iio: adc: meson: add iio channels to read channel 7 mux inputs   Andy Shevchenko
      • [PATCH v5 0/6] iio: adc: meson: add iio channels to read channel 7 mux inputs   George Stark
      • [PATCH v5 0/6] iio: adc: meson: add iio channels to read channel 7 mux inputs   Andy Shevchenko
• [PATCH v5 1/6] iio: adc: meson: remove unused timestamp channel   George Stark
• [PATCH v5 2/6] iio: adc: meson: move enums declaration before variables declaration   George Stark
• [PATCH v5 3/6] iio: adc: meson: move meson_sar_adc_set_chan7_mux routine upper   George Stark
• [PATCH v5 4/6] iio: adc: meson: add enum for iio channel numbers   George Stark
• [PATCH v5 5/6] iio: adc: meson: add channel labels   George Stark
• [PATCH v5 6/6] iio: adc: meson: support reading from channel 7 mux inputs   George Stark
• [PATCH 01/27] thermal/drivers/amlogic: Convert to platform remove callback returning void   Yangtao Li
  • [PATCH 01/27] thermal/drivers/amlogic: Convert to platform remove callback returning void   Uwe Kleine-König
• [PATCH RFC v1 22/52] drm/meson: Use struct drm_crtc::drm_dev instead of struct drm_crtc::dev   Uwe Kleine-König
• [PATCH RFC v1 00/52] drm/crtc: Rename struct drm_crtc::dev to drm_dev   Javier Martinez Canillas
• [PATCH v2 01/19] clk: meson: introduce meson-clkc-utils   Jerome Brunet
  • [PATCH v2 01/19] clk: meson: introduce meson-clkc-utils   Neil Armstrong
• [PATCH v6 0/6] meson saradc: add iio channels to read channel 7 mux inputs   George Stark
  • [PATCH v6 0/6] meson saradc: add iio channels to read channel 7 mux inputs   Andy Shevchenko
• [PATCH v6 1/6] iio: adc: meson: remove unused timestamp channel   George Stark
• [PATCH v6 2/6] iio: adc: meson: move enums declaration before variables declaration   George Stark
• [PATCH v6 3/6] iio: adc: meson: move meson_sar_adc_set_chan7_mux routine upper   George Stark
• [PATCH v6 4/6] iio: adc: meson: add enum for iio channel numbers   George Stark
• [PATCH v6 5/6] iio: adc: meson: add channel labels   George Stark
• [PATCH 01/28] media: cec: ch7322: drop of_match_ptr for ID table   Krzysztof Kozlowski
  • [PATCH 01/28] media: cec: ch7322: drop of_match_ptr for ID table   Hans Verkuil
  • [PATCH 01/28] media: cec: ch7322: drop of_match_ptr for ID table   Sakari Ailus
    • [PATCH 01/28] media: cec: ch7322: drop of_match_ptr for ID table   Krzysztof Kozlowski
• [PATCH 18/58] mmc: meson-gx: Convert to platform remove callback returning void   Yangtao Li
• [PATCH 21/58] mmc: meson-mx-sdhc: Convert to platform remove callback returning void   Yangtao Li
• [PATCH 35/58] mmc: meson-mx-sdio: Convert to platform remove callback returning void   Yangtao Li
• [PATCH v7 0/6] meson saradc: add iio channels to read channel 7 mux inputs   George Stark
  • [PATCH v7 0/6] meson saradc: add iio channels to read channel 7 mux inputs   Jonathan Cameron
• [PATCH v7 1/6] iio: adc: meson: remove unused timestamp channel   George Stark
• [PATCH v7 2/6] iio: adc: meson: move enums declaration before variables declaration   George Stark
• [PATCH v7 3/6] iio: adc: meson: move meson_sar_adc_set_chan7_mux routine upper   George Stark
• [PATCH v7 4/6] iio: adc: meson: add enum for iio channel numbers   George Stark
• [PATCH v7 5/6] iio: adc: meson: add channel labels   George Stark
• [PATCH v7 6/6] iio: adc: meson: support reading from channel 7 mux inputs   George Stark
• [PATCH V3 0/2] Add pinctrl driver support for Amlogic C3 SoCs   Huqiang Qin
  • [PATCH V3 1/2] dt-bindings: pinctrl: Add compatibles for Amlogic C3 SoCs   Huqiang Qin
    • [PATCH V3 1/2] dt-bindings: pinctrl: Add compatibles for Amlogic C3 SoCs   Rob Herring
    • [PATCH V3 1/2] dt-bindings: pinctrl: Add compatibles for Amlogic C3 SoCs   Linus Walleij
  • [PATCH V3 2/2] pinctrl: Add driver support for Amlogic C3 SoCs   Huqiang Qin
    • [PATCH V3 2/2] pinctrl: Add driver support for Amlogic C3 SoCs   Linus Walleij
      • [PATCH V3 2/2] pinctrl: Add driver support for Amlogic C3 SoCs   Huqiang Qin
      • [PATCH V3 2/2] pinctrl: Add driver support for Amlogic C3 SoCs   Linus Walleij
    • [PATCH V3 2/2] pinctrl: Add driver support for Amlogic C3 SoCs   Linus Walleij
• [PATCH] clk: Explicitly include correct DT includes   Rob Herring
  • [PATCH] clk: Explicitly include correct DT includes   Dinh Nguyen
  • [PATCH] clk: Explicitly include correct DT includes   Krzysztof Kozlowski
  • [PATCH] clk: Explicitly include correct DT includes   Heiko Stuebner
  • [PATCH] clk: Explicitly include correct DT includes   Chanwoo Choi
  • [PATCH] clk: Explicitly include correct DT includes   Geert Uytterhoeven
  • [PATCH] clk: Explicitly include correct DT includes   AngeloGioacchino Del Regno
  • [PATCH] clk: Explicitly include correct DT includes   Luca Ceresoli
  • [PATCH] clk: Explicitly include correct DT includes   Dmitry Rokosov
• [PATCH] crypto: Explicitly include correct DT includes   Rob Herring
• [PATCH] I2C: Explicitly include correct DT includes   Rob Herring
  • [PATCH] I2C: Explicitly include correct DT includes   Andi Shyti
• [PATCH] iio: adc: Explicitly include correct DT includes   Rob Herring
  • [PATCH] iio: adc: Explicitly include correct DT includes   Jonathan Cameron
    • [PATCH] iio: adc: Explicitly include correct DT includes   Jonathan Cameron
  • [PATCH] iio: adc: Explicitly include correct DT includes   Heiko Stuebner
• [PATCH] media: Explicitly include correct DT includes   Rob Herring
• [PATCH] mmc: Explicitly include correct DT includes   Rob Herring
  • [PATCH] mmc: Explicitly include correct DT includes   Rob Herring
• [PATCH] mtd: Explicitly include correct DT includes   Rob Herring
  • [PATCH] mtd: Explicitly include correct DT includes   Miquel Raynal
  • [PATCH] mtd: Explicitly include correct DT includes   Linus Walleij
  • [PATCH] mtd: Explicitly include correct DT includes   Heiko Stuebner
  • [PATCH] mtd: Explicitly include correct DT includes   Miquel Raynal
• [PATCH] nvmem: Explicitly include correct DT includes   Rob Herring
  • [PATCH] nvmem: Explicitly include correct DT includes   Srinivas Kandagatla
• [PATCH] PCI: Explicitly include correct DT includes   Rob Herring
• [PATCH] drivers/perf: Explicitly include correct DT includes   Rob Herring
  • [PATCH] drivers/perf: Explicitly include correct DT includes   Will Deacon
• [PATCH] phy: Explicitly include correct DT includes   Rob Herring
  • [PATCH] phy: Explicitly include correct DT includes   Sergio Paracuellos
  • [PATCH] phy: Explicitly include correct DT includes   Heiko Stuebner
  • [PATCH] phy: Explicitly include correct DT includes   Marc Kleine-Budde
  • [PATCH] phy: Explicitly include correct DT includes   Vinod Koul
• [PATCH] pwm: Explicitly include correct DT includes   Rob Herring
  • [PATCH] pwm: Explicitly include correct DT includes   Tzung-Bi Shih
  • [PATCH] pwm: Explicitly include correct DT includes   Uwe Kleine-König
    • [PATCH] pwm: Explicitly include correct DT includes   Rob Herring
  • [PATCH] pwm: Explicitly include correct DT includes   nobuhiro1.iwamatsu at toshiba.co.jp
  • [PATCH] pwm: Explicitly include correct DT includes   Thierry Reding
• [PATCH] pinctrl: Explicitly include correct DT includes   Rob Herring
  • [PATCH] pinctrl: Explicitly include correct DT includes   Damien Le Moal
  • [PATCH] pinctrl: Explicitly include correct DT includes   Geert Uytterhoeven
  • [PATCH] pinctrl: Explicitly include correct DT includes   Emil Renner Berthing
  • [PATCH] pinctrl: Explicitly include correct DT includes   Linus Walleij
• [PATCH] reset: Explicitly include correct DT includes   Rob Herring
  • [PATCH] reset: Explicitly include correct DT includes   Damien Le Moal
  • [PATCH] reset: Explicitly include correct DT includes   Steen Hegelund
• [PATCH] spi: Explicitly include correct DT includes   Rob Herring
  • [PATCH] spi: Explicitly include correct DT includes   Mark Brown
• [PATCH] staging: Explicitly include correct DT includes   Rob Herring
  • [greybus-dev] [PATCH] staging: Explicitly include correct DT includes   Alex Elder
  • [PATCH] staging: Explicitly include correct DT includes   Luca Ceresoli
  • [PATCH] staging: Explicitly include correct DT includes   Parthiban.Veerasooran at microchip.com
  • [PATCH] staging: Explicitly include correct DT includes   Hans Verkuil
• [PATCH] thermal: Explicitly include correct DT includes   Rob Herring
  • [PATCH] thermal: Explicitly include correct DT includes   Rafael J. Wysocki
    • [PATCH] thermal: Explicitly include correct DT includes   Rob Herring
      • [PATCH] thermal: Explicitly include correct DT includes   Rafael J. Wysocki
  • [PATCH] thermal: Explicitly include correct DT includes   Alim Akhtar
• [PATCH] watchdog: Explicitly include correct DT includes   Rob Herring
  • [PATCH] watchdog: Explicitly include correct DT includes   Guenter Roeck
  • [PATCH] watchdog: Explicitly include correct DT includes   Alim Akhtar
• [PATCH] soc: amlogic: Explicitly include correct DT includes   Rob Herring
  • [PATCH] soc: amlogic: Explicitly include correct DT includes   Neil Armstrong
  • [PATCH] soc: amlogic: Explicitly include correct DT includes   Neil Armstrong
• [PATCH v1 0/1] iio: adc: meson: fix core clock enable/disable moment   George Stark
  • [PATCH v1 1/1] iio: adc: meson: fix core clock enable/disable moment   George Stark
    • [PATCH v1 1/1] iio: adc: meson: fix core clock enable/disable moment   Jonathan Cameron
      • [PATCH v1 1/1] iio: adc: meson: fix core clock enable/disable moment   George Stark
• [PATCH v1 0/3] iio: adc: meson: tune init sequence   George Stark
  • [PATCH v1 2/3] iio: adc: meson: init internal continuous ring counter   George Stark
    • [PATCH 2/3] iio: adc: meson: init internal continuous ring counter   Markus Elfring
  • [PATCH v1 0/3] iio: adc: meson: tune init sequence   Jonathan Cameron
    • [PATCH v1 0/3] iio: adc: meson: tune init sequence   George Stark
      • [PATCH v1 0/3] iio: adc: meson: tune init sequence   Andy Shevchenko
      • [PATCH v1 0/3] iio: adc: meson: tune init sequence   Jonathan Cameron
      • [PATCH v1 0/3] iio: adc: meson: tune init sequence   Jonathan Cameron
• [PATCH v1 1/3] iio: adc: meson: init channels 0,1 input muxes   George Stark
  • [PATCH 1/3] iio: adc: meson: init channels 0,1 input muxes   Markus Elfring
• [PATCH v1 3/3] iio: adc: meson: init voltage control bits   George Stark
• [PATCH] firmware: meson_sm: fix to avoid potential NULL pointer dereference   Zhang Shurong
  • [PATCH] firmware: meson_sm: fix to avoid potential NULL pointer dereference   neil.armstrong at linaro.org
  • [PATCH] firmware: meson_sm: fix to avoid potential NULL pointer dereference   Neil Armstrong
• [PATCH] net: Explicitly include correct DT includes   Alex Elder
  • [PATCH] net: Explicitly include correct DT includes   Paolo Abeni
• [PATCH v4 0/2] support 512B ECC step size for Meson NAND   Arseniy Krasnov
  • [PATCH v4 1/2] dt-bindings: nand: meson: make ECC properties dependent   Arseniy Krasnov
    • [PATCH v4 1/2] dt-bindings: nand: meson: make ECC properties dependent   Miquel Raynal
  • [PATCH v4 2/2] mtd: rawnand: meson: support for 512B ECC step size   Arseniy Krasnov
    • [PATCH v4 2/2] mtd: rawnand: meson: support for 512B ECC step size   Miquel Raynal
• [PATCH] ARM: meson: Drop unused includes   Rob Herring
  • [PATCH] ARM: meson: Drop unused includes   Neil Armstrong
  • [PATCH] ARM: meson: Drop unused includes   Neil Armstrong
• [PATCH V4] nvmem: add explicit config option to read old syntax fixed OF cells   Rafał Miłecki
• [Linux-stm32] [PATCH V4] nvmem: add explicit config option to read old syntax fixed OF cells   Rafał Miłecki
  • [Linux-stm32] [PATCH V4] nvmem: add explicit config option to read old syntax fixed OF cells   Ahmad Fatoum
• [PATCH v2 0/3] reset: meson-c3: add reset driver   zelong dong
  • [PATCH v2 1/3] dt-bindings: reset: Add compatible and DT bindings for Meson-C3 Reset Controller   zelong dong
    • [PATCH v2 1/3] dt-bindings: reset: Add compatible and DT bindings for Meson-C3 Reset Controller   Rob Herring
  • [PATCH v2 2/3] reset: reset-meson: add support for the Meson-C3 SoC Reset Controller   zelong dong
  • [PATCH v2 3/3] arm64: dts: meson: add reset controller for Meson-C3 SoC   zelong dong
• [PATCH v2] mmc: Explicitly include correct DT includes   Rob Herring
  • [PATCH v2] mmc: Explicitly include correct DT includes   Adrian Hunter
• Duležitá zpráva; € 2,000,000'00 EUR   Pan Richard Wahl
• [PATCH v3 0/3] reset: amlogic-c3: add reset driver   zelong dong
  • [PATCH v3 1/3] dt-bindings: reset: Add compatible and DT bindings for Amlogic C3 Reset Controller   zelong dong
    • [PATCH v3 1/3] dt-bindings: reset: Add compatible and DT bindings for Amlogic C3 Reset Controller   Krzysztof Kozlowski
    • [PATCH v3 1/3] dt-bindings: reset: Add compatible and DT bindings for Amlogic C3 Reset Controller   Dmitry Rokosov
      • [PATCH v3 1/3] dt-bindings: reset: Add compatible and DT bindings for Amlogic C3 Reset Controller   Krzysztof Kozlowski
      • [PATCH v3 1/3] dt-bindings: reset: Add compatible and DT bindings for Amlogic C3 Reset Controller   Dmitry Rokosov
    • [PATCH v3 1/3] dt-bindings: reset: Add compatible and DT bindings for Amlogic C3 Reset Controller   Philipp Zabel
      • [PATCH v3 1/3] dt-bindings: reset: Add compatible and DT bindings for Amlogic C3 Reset Controller   Krzysztof Kozlowski
      • [PATCH v3 1/3] dt-bindings: reset: Add compatible and DT bindings for Amlogic C3 Reset Controller   Neil Armstrong
      • [PATCH v3 1/3] dt-bindings: reset: Add compatible and DT bindings for Amlogic C3 Reset Controller   Neil Armstrong
      • [PATCH v3 1/3] dt-bindings: reset: Add compatible and DT bindings for Amlogic C3 Reset Controller   Zelong Dong
      • [PATCH v3 1/3] dt-bindings: reset: Add compatible and DT bindings for Amlogic C3 Reset Controller   Neil Armstrong
  • [PATCH v3 2/3] reset: reset-meson: add support for Amlogic C3 SoC Reset Controller   zelong dong
  • [PATCH v3 3/3] arm64: dts: amlogic: add reset controller for Amlogic C3 SoC   zelong dong
    • [PATCH v3 3/3] arm64: dts: amlogic: add reset controller for Amlogic C3 SoC   Dmitry Rokosov
• [PATCH v2] clk: Explicitly include correct DT includes   Abel Vesa
• [PATCH v2] media: Explicitly include correct DT includes   Niklas Söderlund
  • [PATCH v2] media: Explicitly include correct DT includes   Sean Young
• [PATCH] arm64: dts: Add gpio_intc node and pinctrl node for Amlogic C3 SoCs   Huqiang Qin
  • [PATCH] arm64: dts: Add gpio_intc node and pinctrl node for Amlogic C3 SoCs   Dmitry Rokosov
• [PATCH v2 00/19] clk: meson: move all private clk IDs to public dt-bindings headers   Jerome Brunet
• [PATCH V2] arm64: dts: Add gpio_intc node and pinctrl node for Amlogic C3 SoCs   Huqiang Qin
  • [PATCH V2] arm64: dts: Add gpio_intc node and pinctrl node for Amlogic C3 SoCs   Dmitry Rokosov
  • [PATCH V2] arm64: dts: Add gpio_intc node and pinctrl node for Amlogic C3 SoCs   Neil Armstrong
• [PATCH v10] drm: Add initial ci/ subdirectory   Helen Koike
  • [PATCH v10] drm: Add initial ci/ subdirectory   Rob Clark
    • [PATCH v10] drm: Add initial ci/ subdirectory   Rob Clark
      • [PATCH v10] drm: Add initial ci/ subdirectory   Daniel Stone
      • [PATCH v10] drm: Add initial ci/ subdirectory   Maxime Ripard
      • [PATCH v10] drm: Add initial ci/ subdirectory   Rob Clark
      • Re: [PATCH v10] drm: Add initial ci/ subdirectory   Helen Mae Koike Fornazier
      • [PATCH v10] drm: Add initial ci/ subdirectory   Rob Clark
  • [PATCH v10] drm: Add initial ci/ subdirectory   Maira Canal
    • [PATCH v10] drm: Add initial ci/ subdirectory   David Heidelberg
  • [PATCH v10] drm: Add initial ci/ subdirectory   Maira Canal
• [PATCH 0/3] Add binding header file for GPIO interrupt of Amlogic Meson-G12A   Huqiang Qin
  • [PATCH 1/3] dt-bindings: interrupt-controller: Add header file for Amlogic Meson-G12A SoCs   Huqiang Qin
    • [PATCH 1/3] dt-bindings: interrupt-controller: Add header file for Amlogic Meson-G12A SoCs   Krzysztof Kozlowski
  • [PATCH 2/3] pinctrl: Replace the IRQ number in the driver with the IRQID macro definition   Huqiang Qin
    • [PATCH 2/3] pinctrl: Replace the IRQ number in the driver with the IRQID macro definition   Linus Walleij
  • [PATCH 3/3] arm64: dts: Replace the IRQ number with the IRQID macro definition   Huqiang Qin
    • [PATCH 3/3] arm64: dts: Replace the IRQ number with the IRQID macro definition   Kevin Hilman
      • [PATCH 3/3] arm64: dts: Replace the IRQ number with the IRQID macro definition   Huqiang Qin
      • [PATCH 3/3] arm64: dts: Replace the IRQ number with the IRQID macro definition   Kevin Hilman
• [PATCH] drm: Explicitly include correct DT includes   Thierry Reding
• [PATCH v2 0/2] iio: adc: meson: fix core clock enable/disable moment   George Stark
  • [PATCH v2 2/2] iio: adc: meson: improve error logging at probe stage   George Stark
    • [PATCH v2 2/2] iio: adc: meson: improve error logging at probe stage   Andy Shevchenko
      • [PATCH v2 2/2] iio: adc: meson: improve error logging at probe stage   Jonathan Cameron
• [PATCH v2 1/2] iio: adc: meson: fix core clock enable/disable moment   George Stark
  • [PATCH v2 1/2] iio: adc: meson: fix core clock enable/disable moment   Jonathan Cameron
• [PATCH V2 0/3] Add binding header file for GPIO interrupt of Amlogic Meson-G12A   Huqiang Qin
  • [PATCH V2 1/3] dt-bindings: interrupt-controller: Add header file for Amlogic Meson-G12A SoCs   Huqiang Qin
    • [PATCH V2 1/3] dt-bindings: interrupt-controller: Add header file for Amlogic Meson-G12A SoCs   Krzysztof Kozlowski
  • [PATCH V2 2/3] pinctrl: Replace the IRQ number in the driver with the IRQID macro definition   Huqiang Qin
  • [PATCH V2 3/3] arm64: dts: Replace the IRQ number with the IRQID macro definition   Huqiang Qin
    • [PATCH V2 3/3] arm64: dts: Replace the IRQ number with the IRQID macro definition   neil.armstrong at linaro.org
  • [PATCH V2 0/3] Add binding header file for GPIO interrupt of Amlogic Meson-G12A   neil.armstrong at linaro.org
• [PATCH v2] watchdog: Explicitly include correct DT includes   Rob Herring
• [PATCH v2] net: Explicitly include correct DT includes   Rob Herring
  • [PATCH v2] net: Explicitly include correct DT includes   Simon Horman
    • [PATCH v2] net: Explicitly include correct DT includes   Rob Herring
• [PATCH v1 0/3] Meson S4 HW RNG Support   Alexey Romanov
  • [PATCH v1 3/3] arch/arm64: dts: meson-s4: add hwrng node   Alexey Romanov
• [PATCH v1 1/3] drivers: rng: add check status bit feature   Alexey Romanov
  • [PATCH v1 1/3] drivers: rng: add check status bit feature   Martin Kaiser
    • [PATCH v1 1/3] drivers: rng: add check status bit feature   Alexey Romanov
      • [PATCH v1 1/3] drivers: rng: add check status bit feature   Martin Kaiser
  • [PATCH v1 1/3] drivers: rng: add check status bit feature   Martin Blumenstingl
• [PATCH v1 2/3] dt-bindings: rng: meson: add meson-rng-s4 compatible   Alexey Romanov
  • [PATCH v1 2/3] dt-bindings: rng: meson: add meson-rng-s4 compatible   Conor Dooley
• [PATCH] arm64: dts: amlogic: meson-g12b-bananapi: switch to enable-gpios   Krzysztof Kozlowski
  • [PATCH] arm64: dts: amlogic: meson-g12b-bananapi: switch to enable-gpios   Neil Armstrong
  • [PATCH] arm64: dts: amlogic: meson-g12b-bananapi: switch to enable-gpios   Neil Armstrong
• [PATCH v2 19/61] mmc: meson-gx: Convert to platform remove callback returning void   Yangtao Li
• [PATCH v2 22/61] mmc: meson-mx-sdhc: Convert to platform remove callback returning void   Yangtao Li
• [PATCH v2 35/61] mmc: meson-mx-sdio: Convert to platform remove callback returning void   Yangtao Li
• [PATCH 0/4] Add watchdog support for Amlogic-T7 SoCs   Huqiang Qin
• [PATCH 1/4] dt-bindings: watchdog: Add support for Amlogic-T7 SoCs   Huqiang Qin
  • [PATCH 1/4] dt-bindings: watchdog: Add support for Amlogic-T7 SoCs   Conor Dooley
• [PATCH 2/4] watchdog: Add a new struct for Amlogic-GXBB driver   Huqiang Qin
  • [PATCH 2/4] watchdog: Add a new struct for Amlogic-GXBB driver   Dmitry Rokosov
• [PATCH 3/4] watchdog: Add support for Amlogic-T7 SoCs   Huqiang Qin
• [PATCH 4/4] arm64: dts: Add watchdog node for Amlogic-T7 SoCs   Huqiang Qin
  • [PATCH 4/4] arm64: dts: Add watchdog node for Amlogic-T7 SoCs   Dmitry Rokosov
• [GIT PULL]: clk: meson: Amlogic clock fixes for v6.5   Stephen Boyd
• [PATCH v3] watchdog: Explicitly include correct DT includes   Rob Herring
• [PATCH net-next v3] net: Explicitly include correct DT includes   Rob Herring
  • [PATCH net-next v3] net: Explicitly include correct DT includes   Simon Horman
  • [PATCH net-next v3] net: Explicitly include correct DT includes   patchwork-bot+netdevbpf at kernel.org
• [PATCH v3 19/62] mmc: meson-gx: Convert to platform remove callback returning void   Yangtao Li
  • [PATCH v3 19/62] mmc: meson-gx: Convert to platform remove callback returning void   Martin Blumenstingl
• [PATCH v3 22/62] mmc: meson-mx-sdhc: Convert to platform remove callback returning void   Yangtao Li
  • [PATCH v3 22/62] mmc: meson-mx-sdhc: Convert to platform remove callback returning void   Martin Blumenstingl
• [PATCH v3 34/62] mmc: meson-mx-sdio: Convert to platform remove callback returning void   Yangtao Li
  • [PATCH v3 34/62] mmc: meson-mx-sdio: Convert to platform remove callback returning void   Martin Blumenstingl
• [PATCH v2 net 0/2] update stmmac fix_mac_speed   Shenwei Wang
  • [PATCH v2 net 1/2] net: stmmac: add new mode parameter for fix_mac_speed   Shenwei Wang
  • [PATCH v2 net 2/2] net: stmmac: dwmac-imx: pause the TXC clock in fixed-link   Shenwei Wang
    • [PATCH v2 net 2/2] net: stmmac: dwmac-imx: pause the TXC clock in fixed-link   Andrew Halaney
      • [EXT] Re: [PATCH v2 net 2/2] net: stmmac: dwmac-imx: pause the TXC clock in fixed-link   Shenwei Wang
      • [PATCH v2 net 2/2] net: stmmac: dwmac-imx: pause the TXC clock in fixed-link   Russell King (Oracle)
      • [PATCH v2 net 2/2] net: stmmac: dwmac-imx: pause the TXC clock in fixed-link   Will Deacon
      • [EXT] Re: [PATCH v2 net 2/2] net: stmmac: dwmac-imx: pause the TXC clock in fixed-link   Shenwei Wang
      • [PATCH v2 net 2/2] net: stmmac: dwmac-imx: pause the TXC clock in fixed-link   Frank Li
      • [PATCH v2 net 2/2] net: stmmac: dwmac-imx: pause the TXC clock in fixed-link   Russell King (Oracle)
    • [PATCH v2 net 2/2] net: stmmac: dwmac-imx: pause the TXC clock in fixed-link   Fabio Estevam
      • [EXT] Re: [PATCH v2 net 2/2] net: stmmac: dwmac-imx: pause the TXC clock in fixed-link   Shenwei Wang
      • [EXT] Re: [PATCH v2 net 2/2] net: stmmac: dwmac-imx: pause the TXC clock in fixed-link   Andrew Lunn
      • [EXT] Re: [PATCH v2 net 2/2] net: stmmac: dwmac-imx: pause the TXC clock in fixed-link   Shenwei Wang
• [PATCH v1] tty: serial: meson: refactor objects definition for different devnames   Dmitry Rokosov
• [PATCH v1] mtd: rawnand: meson: fix build error   Arseniy Krasnov
  • [PATCH v1] mtd: rawnand: meson: fix build error   Miquel Raynal
• [PATCH] clk: meson: meson8b: Simplify notifier clock lookup   Chen-Yu Tsai
• W sprawie samochodu   Radosław Grabowski
• [PATCH] arm64: dts: amlogic: meson-sm1-odroid: drop redundant status=okay   Krzysztof Kozlowski
  • [PATCH] arm64: dts: amlogic: meson-sm1-odroid: drop redundant status=okay   Neil Armstrong
  • [PATCH] arm64: dts: amlogic: meson-sm1-odroid: drop redundant status=okay   Krzysztof Kozlowski
    • [PATCH] arm64: dts: amlogic: meson-sm1-odroid: drop redundant status=okay   Neil Armstrong
• [PATCH v2] arm64: dts: amlogic: drop redundant status=okay in sound nodes   Krzysztof Kozlowski
  • [PATCH v2] arm64: dts: amlogic: drop redundant status=okay in sound nodes   Neil Armstrong
  • [PATCH v2] arm64: dts: amlogic: drop redundant status=okay in sound nodes   Neil Armstrong
• [PATCH v3 net 0/2] update stmmac fix_mac_speed   Shenwei Wang
  • [PATCH v3 net 1/2] net: stmmac: add new mode parameter for fix_mac_speed   Shenwei Wang
    • [PATCH v3 net 1/2] net: stmmac: add new mode parameter for fix_mac_speed   Marc Kleine-Budde
  • [PATCH v3 net 2/2] net: stmmac: dwmac-imx: pause the TXC clock in fixed-link   Shenwei Wang

Last message date: Mon Jul 31 23:37:21 PDT 2023
Archived on: Mon Jul 31 23:38:27 PDT 2023

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...