[PATCH v2 02/15] spi: Drop duplicate IDR allocation code in spi_register_controller()
Andy Shevchenko
andriy.shevchenko at linux.intel.com
Mon Jul 10 08:49:19 PDT 2023
Refactor spi_register_controller() to drop duplicate IDR allocation.
Instead of if-else-if branching use two sequential if:s, which allows
to re-use the logic of IDR allocation in all cases.
Signed-off-by: Andy Shevchenko <andriy.shevchenko at linux.intel.com>
---
drivers/spi/spi.c | 50 ++++++++++++++++++++++-------------------------
1 file changed, 23 insertions(+), 27 deletions(-)
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 8f3282a71c63..6d74218cf38e 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -3081,6 +3081,20 @@ static int spi_controller_check_ops(struct spi_controller *ctlr)
return 0;
}
+/* Allocate dynamic bus number using Linux idr */
+static int spi_controller_id_alloc(struct spi_controller *ctlr, int start, int end)
+{
+ int id;
+
+ mutex_lock(&board_lock);
+ id = idr_alloc(&spi_master_idr, ctlr, start, end, GFP_KERNEL);
+ mutex_unlock(&board_lock);
+ if (WARN(id < 0, "couldn't get idr"))
+ return id == -ENOSPC ? -EBUSY : id;
+ ctlr->bus_num = id;
+ return 0;
+}
+
/**
* spi_register_controller - register SPI master or slave controller
* @ctlr: initialized master, originally from spi_alloc_master() or
@@ -3108,8 +3122,8 @@ int spi_register_controller(struct spi_controller *ctlr)
{
struct device *dev = ctlr->dev.parent;
struct boardinfo *bi;
+ int first_dynamic;
int status;
- int id, first_dynamic;
if (!dev)
return -ENODEV;
@@ -3122,27 +3136,13 @@ int spi_register_controller(struct spi_controller *ctlr)
if (status)
return status;
+ if (ctlr->bus_num < 0)
+ ctlr->bus_num = of_alias_get_id(ctlr->dev.of_node, "spi");
if (ctlr->bus_num >= 0) {
/* Devices with a fixed bus num must check-in with the num */
- mutex_lock(&board_lock);
- id = idr_alloc(&spi_master_idr, ctlr, ctlr->bus_num,
- ctlr->bus_num + 1, GFP_KERNEL);
- mutex_unlock(&board_lock);
- if (WARN(id < 0, "couldn't get idr"))
- return id == -ENOSPC ? -EBUSY : id;
- ctlr->bus_num = id;
- } else {
- /* Allocate dynamic bus number using Linux idr */
- id = of_alias_get_id(ctlr->dev.of_node, "spi");
- if (id >= 0) {
- ctlr->bus_num = id;
- mutex_lock(&board_lock);
- id = idr_alloc(&spi_master_idr, ctlr, ctlr->bus_num,
- ctlr->bus_num + 1, GFP_KERNEL);
- mutex_unlock(&board_lock);
- if (WARN(id < 0, "couldn't get idr"))
- return id == -ENOSPC ? -EBUSY : id;
- }
+ status = spi_controller_id_alloc(ctlr, ctlr->bus_num, ctlr->bus_num + 1);
+ if (status)
+ return status;
}
if (ctlr->bus_num < 0) {
first_dynamic = of_alias_get_highest_id("spi");
@@ -3151,13 +3151,9 @@ int spi_register_controller(struct spi_controller *ctlr)
else
first_dynamic++;
- mutex_lock(&board_lock);
- id = idr_alloc(&spi_master_idr, ctlr, first_dynamic,
- 0, GFP_KERNEL);
- mutex_unlock(&board_lock);
- if (WARN(id < 0, "couldn't get idr"))
- return id;
- ctlr->bus_num = id;
+ status = spi_controller_id_alloc(ctlr, first_dynamic, 0);
+ if (status)
+ return status;
}
ctlr->bus_lock_flag = 0;
init_completion(&ctlr->xfer_completion);
--
2.40.0.1.gaa8946217a0b
More information about the linux-amlogic
mailing list