[PATCH V2 3/4] soc: c3: Add support for power domains controller

[Neil Armstrong]

On 07/07/2023 02:37, Xianwei Zhao wrote:
> Add support for C3 Power controller. C3 power control
> registers are in secure domain, and should be accessed by SMC.
> 
> Signed-off-by: Xianwei Zhao <xianwei.zhao at amlogic.com>
> ---
> V1 -> V2: Fixed some formatting.
> ---
>   drivers/soc/amlogic/meson-secure-pwrc.c | 26 +++++++++++++++++++++++++
>   1 file changed, 26 insertions(+)
> 
> diff --git a/drivers/soc/amlogic/meson-secure-pwrc.c b/drivers/soc/amlogic/meson-secure-pwrc.c
> index c11d65a3e3d9..a1ffebf70de3 100644
> --- a/drivers/soc/amlogic/meson-secure-pwrc.c
> +++ b/drivers/soc/amlogic/meson-secure-pwrc.c
> @@ -11,6 +11,7 @@
>   #include <linux/platform_device.h>
>   #include <linux/pm_domain.h>
>   #include <dt-bindings/power/meson-a1-power.h>
> +#include <dt-bindings/power/amlogic,c3-pwrc.h>
>   #include <dt-bindings/power/meson-s4-power.h>
>   #include <linux/arm-smccc.h>
>   #include <linux/firmware/meson/meson_sm.h>
> @@ -120,6 +121,22 @@ static struct meson_secure_pwrc_domain_desc a1_pwrc_domains[] = {
>   	SEC_PD(RSA,	0),
>   };
>   
> +static struct meson_secure_pwrc_domain_desc c3_pwrc_domains[] = {
> +	SEC_PD(C3_NNA,	0),
> +	SEC_PD(C3_AUDIO,	GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_SDIOA,	GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_EMMC,	GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_USB_COMB, GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_SDCARD,	GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_ETH,	GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_GE2D,	GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_CVE,	GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_GDC_WRAP,	GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_ISP_TOP,		GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_MIPI_ISP_WRAP, GENPD_FLAG_ALWAYS_ON),
> +	SEC_PD(C3_VCODEC,	0),
> +};
> +
>   static struct meson_secure_pwrc_domain_desc s4_pwrc_domains[] = {
>   	SEC_PD(S4_DOS_HEVC,	0),
>   	SEC_PD(S4_DOS_VDEC,	0),
> @@ -202,6 +219,11 @@ static struct meson_secure_pwrc_domain_data meson_secure_a1_pwrc_data = {
>   	.count = ARRAY_SIZE(a1_pwrc_domains),
>   };
>   
> +static struct meson_secure_pwrc_domain_data amlogic_secure_c3_pwrc_data = {
> +	.domains = c3_pwrc_domains,
> +	.count = ARRAY_SIZE(c3_pwrc_domains),
> +};
> +
>   static struct meson_secure_pwrc_domain_data meson_secure_s4_pwrc_data = {
>   	.domains = s4_pwrc_domains,
>   	.count = ARRAY_SIZE(s4_pwrc_domains),
> @@ -212,6 +234,10 @@ static const struct of_device_id meson_secure_pwrc_match_table[] = {
>   		.compatible = "amlogic,meson-a1-pwrc",
>   		.data = &meson_secure_a1_pwrc_data,
>   	},
> +	{
> +		.compatible = "amlogic,c3-pwrc",
> +		.data = &amlogic_secure_c3_pwrc_data,
> +	},
>   	{
>   		.compatible = "amlogic,meson-s4-pwrc",
>   		.data = &meson_secure_s4_pwrc_data,

Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>