[PATCH v2 2/2] spi: amlogic-spifc-a1: add support for max_speed_hz

[Neil Armstrong]

On 06/07/2023 13:03, Martin Kurbanov wrote:
> This patch sets the clock rate (spi_transfer->max_speed_hz) from the
> amlogic_spifc_a1_exec_op().
> 
> Signed-off-by: Martin Kurbanov <mmkurbanov at sberdevices.ru>
> ---
>   drivers/spi/spi-amlogic-spifc-a1.c | 20 ++++++++++++++++++++
>   1 file changed, 20 insertions(+)
> 
> diff --git a/drivers/spi/spi-amlogic-spifc-a1.c b/drivers/spi/spi-amlogic-spifc-a1.c
> index a92e4fc23396..605e9e40455c 100644
> --- a/drivers/spi/spi-amlogic-spifc-a1.c
> +++ b/drivers/spi/spi-amlogic-spifc-a1.c
> @@ -107,6 +107,7 @@ struct amlogic_spifc_a1 {
>   	struct clk *clk;
>   	struct device *dev;
>   	void __iomem *base;
> +	u32 curr_speed_hz;
>   };
>   
>   static int amlogic_spifc_a1_request(struct amlogic_spifc_a1 *spifc, bool read)
> @@ -235,6 +236,21 @@ static int amlogic_spifc_a1_write(struct amlogic_spifc_a1 *spifc,
>   	return amlogic_spifc_a1_request(spifc, false);
>   }
>   
> +static int amlogic_spifc_a1_set_freq(struct amlogic_spifc_a1 *spifc, u32 freq)
> +{
> +	int ret;
> +
> +	if (freq == spifc->curr_speed_hz)
> +		return 0;
> +
> +	ret = clk_set_rate(spifc->clk, freq);
> +	if (ret)
> +		return ret;
> +
> +	spifc->curr_speed_hz = freq;
> +	return 0;
> +}
> +
>   static int amlogic_spifc_a1_exec_op(struct spi_mem *mem,
>   				    const struct spi_mem_op *op)
>   {
> @@ -243,6 +259,10 @@ static int amlogic_spifc_a1_exec_op(struct spi_mem *mem,
>   	size_t data_size = op->data.nbytes;
>   	int ret;
>   
> +	ret = amlogic_spifc_a1_set_freq(spifc, mem->spi->max_speed_hz);
> +	if (ret)
> +		return ret;
> +
>   	amlogic_spifc_a1_user_init(spifc);
>   	amlogic_spifc_a1_set_cmd(spifc, SPIFC_A1_USER_CMD(op));
>   

Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>