[PATCH v2 2/2] spi: amlogic-spifc-a1: add support for max_speed_hz

[Jerome Brunet]

On Thu 06 Jul 2023 at 14:03, Martin Kurbanov <mmkurbanov at sberdevices.ru> wrote:

> This patch sets the clock rate (spi_transfer->max_speed_hz) from the
> amlogic_spifc_a1_exec_op().
>
> Signed-off-by: Martin Kurbanov <mmkurbanov at sberdevices.ru>
> ---
>  drivers/spi/spi-amlogic-spifc-a1.c | 20 ++++++++++++++++++++
>  1 file changed, 20 insertions(+)
>
> diff --git a/drivers/spi/spi-amlogic-spifc-a1.c b/drivers/spi/spi-amlogic-spifc-a1.c
> index a92e4fc23396..605e9e40455c 100644
> --- a/drivers/spi/spi-amlogic-spifc-a1.c
> +++ b/drivers/spi/spi-amlogic-spifc-a1.c
> @@ -107,6 +107,7 @@ struct amlogic_spifc_a1 {
>  	struct clk *clk;
>  	struct device *dev;
>  	void __iomem *base;
> +	u32 curr_speed_hz;
>  };
>  
>  static int amlogic_spifc_a1_request(struct amlogic_spifc_a1 *spifc, bool read)
> @@ -235,6 +236,21 @@ static int amlogic_spifc_a1_write(struct amlogic_spifc_a1 *spifc,
>  	return amlogic_spifc_a1_request(spifc, false);
>  }
>  
> +static int amlogic_spifc_a1_set_freq(struct amlogic_spifc_a1 *spifc, u32 freq)
> +{
> +	int ret;
> +
> +	if (freq == spifc->curr_speed_hz)
> +		return 0;
> +
> +	ret = clk_set_rate(spifc->clk, freq);
> +	if (ret)
> +		return ret;
> +
> +	spifc->curr_speed_hz = freq;

There is no guarantee that clk_set_rate() has set the rate you have
requested, at least not precisely. You should call clk_get_rate() here.

> +	return 0;
> +}
> +
>  static int amlogic_spifc_a1_exec_op(struct spi_mem *mem,
>  				    const struct spi_mem_op *op)
>  {
> @@ -243,6 +259,10 @@ static int amlogic_spifc_a1_exec_op(struct spi_mem *mem,
>  	size_t data_size = op->data.nbytes;
>  	int ret;
>  
> +	ret = amlogic_spifc_a1_set_freq(spifc, mem->spi->max_speed_hz);
> +	if (ret)
> +		return ret;
> +
>  	amlogic_spifc_a1_user_init(spifc);
>  	amlogic_spifc_a1_set_cmd(spifc, SPIFC_A1_USER_CMD(op));