[PATCH v3 3/3] arm64: dts: amlogic: add reset controller for Amlogic C3 SoC

[Dmitry Rokosov]

On Wed, Jul 19, 2023 at 02:09:54PM +0800, zelong dong wrote:
> From: Zelong Dong <zelong.dong at amlogic.com>
> 
> Add the reset controller device of Amlogic C3 SoC family
> 
> Signed-off-by: Zelong Dong <zelong.dong at amlogic.com>

Reviewed-by: Dmitry Rokosov <ddrokosov at sberdevices.ru>

> ---
>  arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
> index 60ad4f3eef9d..28698c42e11e 100644
> --- a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
> @@ -6,6 +6,7 @@
>  #include <dt-bindings/interrupt-controller/irq.h>
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>  #include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/reset/amlogic,c3-reset.h>
>  
>  / {
>  	cpus {
> @@ -72,6 +73,12 @@ apb4: bus at fe000000 {
>  			#size-cells = <2>;
>  			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
>  
> +			reset: reset-controller at 2000 {
> +				compatible = "amlogic,c3-reset";
> +				reg = <0x0 0x2000 0x0 0x98>;
> +				#reset-cells = <1>;
> +			};
> +
>  			uart_b: serial at 7a000 {
>  				compatible = "amlogic,meson-s4-uart",
>  					   "amlogic,meson-ao-uart";
> -- 
> 2.35.1
> 
> 
> _______________________________________________
> linux-amlogic mailing list
> linux-amlogic at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-amlogic

-- 
Thank you,
Dmitry