[PATCH v2 2/3] dt-bindings: clock: amlogic: convert amlogic,gxbb-aoclkc.txt to dt-schema

Rob Herring robh at kernel.org
Wed Jul 5 12:56:31 PDT 2023


On Wed, Jul 05, 2023 at 01:41:52PM +0200, Neil Armstrong wrote:
> Convert the Amlogic Always-On Clock Controller bindings to dt-schema.
> 
> Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
> ---
>  .../bindings/clock/amlogic,gxbb-aoclkc.txt         |  64 -------------
>  .../bindings/clock/amlogic,gxbb-aoclkc.yaml        | 101 +++++++++++++++++++++
>  2 files changed, 101 insertions(+), 64 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt
> deleted file mode 100644
> index c41f0be5d438..000000000000
> --- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt
> +++ /dev/null
> @@ -1,64 +0,0 @@
> -* Amlogic GXBB AO Clock and Reset Unit
> -
> -The Amlogic GXBB AO clock controller generates and supplies clock to various
> -controllers within the Always-On part of the SoC.
> -
> -Required Properties:
> -
> -- compatible: value should be different for each SoC family as :
> -	- GXBB (S905) : "amlogic,meson-gxbb-aoclkc"
> -	- GXL (S905X, S905D) : "amlogic,meson-gxl-aoclkc"
> -	- GXM (S912) : "amlogic,meson-gxm-aoclkc"
> -	- AXG (A113D, A113X) : "amlogic,meson-axg-aoclkc"
> -	- G12A (S905X2, S905D2, S905Y2) : "amlogic,meson-g12a-aoclkc"
> -	followed by the common "amlogic,meson-gx-aoclkc"
> -- clocks: list of clock phandle, one for each entry clock-names.
> -- clock-names: should contain the following:
> -  * "xtal"     : the platform xtal
> -  * "mpeg-clk" : the main clock controller mother clock (aka clk81)
> -  * "ext-32k-0"  : external 32kHz reference #0 if any (optional)
> -  * "ext-32k-1"  : external 32kHz reference #1 if any (optional - gx only)
> -  * "ext-32k-2"  : external 32kHz reference #2 if any (optional - gx only)
> -
> -- #clock-cells: should be 1.
> -
> -Each clock is assigned an identifier and client nodes can use this identifier
> -to specify the clock which they consume. All available clocks are defined as
> -preprocessor macros in the dt-bindings/clock/gxbb-aoclkc.h header and can be
> -used in device tree sources.
> -
> -- #reset-cells: should be 1.
> -
> -Each reset is assigned an identifier and client nodes can use this identifier
> -to specify the reset which they consume. All available resets are defined as
> -preprocessor macros in the dt-bindings/reset/gxbb-aoclkc.h header and can be
> -used in device tree sources.
> -
> -Parent node should have the following properties :
> -- compatible: "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd"
> -- reg: base address and size of the AO system control register space.
> -
> -Example: AO Clock controller node:
> -
> -ao_sysctrl: sys-ctrl at 0 {
> -	compatible = "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd";
> -	reg =  <0x0 0x0 0x0 0x100>;
> -
> -	clkc_AO: clock-controller {
> -		compatible = "amlogic,meson-gxbb-aoclkc", "amlogic,meson-gx-aoclkc";
> -		#clock-cells = <1>;
> -		#reset-cells = <1>;
> -		clocks = <&xtal>, <&clkc CLKID_CLK81>;
> -		clock-names = "xtal", "mpeg-clk";
> -	};
> -
> -Example: UART controller node that consumes the clock and reset generated
> -  by the clock controller:
> -
> -	uart_AO: serial at 4c0 {
> -		compatible = "amlogic,meson-uart";
> -		reg = <0x4c0 0x14>;
> -		interrupts = <0 90 1>;
> -		clocks = <&clkc_AO CLKID_AO_UART1>;
> -		resets = <&clkc_AO RESET_AO_UART1>;
> -	};
> diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.yaml
> new file mode 100644
> index 000000000000..0adcfbcf5c85
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.yaml
> @@ -0,0 +1,101 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/amlogic,gxbb-aoclkc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Amlogic Always-On Clock Controller
> +
> +maintainers:
> +  - Neil Armstrong <neil.armstrong at linaro.org>
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - items:
> +          - enum:
> +              - amlogic,meson-gxbb-aoclkc
> +              - amlogic,meson-gxl-aoclkc
> +              - amlogic,meson-gxm-aoclkc
> +              - amlogic,meson-axg-aoclkc
> +          - const: amlogic,meson-gx-aoclkc
> +      - enum:
> +          - amlogic,meson-axg-aoclkc
> +          - amlogic,meson-g12a-aoclkc
> +
> +  clocks:
> +    minItems: 2
> +    maxItems: 5
> +
> +  clock-names:
> +    minItems: 2
> +    maxItems: 5
> +
> +  '#clock-cells':
> +    const: 1
> +
> +  '#reset-cells':
> +    const: 1
> +
> +required:
> +  - compatible
> +  - clocks
> +  - clock-names
> +  - '#clock-cells'
> +  - '#reset-cells'
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          enum:
> +            - amlogic,meson-gxbb-aoclkc
> +
> +    then:
> +      properties:
> +        clock-names:
> +          minItems: 2
> +          items:
> +            - const: xtal 
> +            - const: mpeg-clk
> +            - const: ext-32k-0
> +            - const: ext-32k-1
> +            - const: ext-32k-2

As the names are always the same, move this to top-level and just set 
the length here (except the constraints are the same as top-level, so 
you can just drop this if/then).

> +
> +  - if:
> +      properties:
> +        compatible:
> +          enum:
> +            - amlogic,meson-g12a-aoclkc
> +
> +    then:
> +      properties:
> +        clocks:
> +          maxItems: 3
> +
> +        clock-names:
> +          minItems: 2
> +          items:
> +            - const: xtal 
> +            - const: mpeg-clk
> +            - const: ext-32k-0

Just 'maxItems: 3'

> +
> +  - if:
> +      properties:
> +        compatible:
> +          enum:
> +            - amlogic,meson-gxl-aoclkc
> +            - amlogic,meson-gxm-aoclkc
> +            - amlogic,meson-axg-aoclkc
> +
> +    then:
> +      properties:
> +        clocks:
> +          maxItems: 2
> +
> +        clock-names:
> +          items:
> +            - const: xtal 
> +            - const: mpeg-clk

maxItems: 2

> +
> +additionalProperties: false
> 
> -- 
> 2.34.1
> 



More information about the linux-amlogic mailing list