[PATCH v3 10/14] spi: Get rid of old SPI_MASTER_NO_TX & SPI_MASTER_NO_RX
Andy Shevchenko
andriy.shevchenko at linux.intel.com
Tue Jul 11 10:17:52 PDT 2023
Convert the users from SPI_MASTER_NO_TX and/or SPI_MASTER_NO_RX
to SPI_CONTROLLER_NO_TX and/or SPI_CONTROLLER_NO_RX respectively
and kill the not used anymore definitions.
Signed-off-by: Andy Shevchenko <andriy.shevchenko at linux.intel.com>
---
drivers/spi/spi-bitbang-txrx.h | 16 ++++++++--------
drivers/spi/spi-bitbang.c | 2 +-
drivers/spi/spi-gpio.c | 8 ++++----
drivers/spi/spi-lp8841-rtc.c | 8 ++++----
drivers/spi/spi-xtensa-xtfpga.c | 2 +-
include/linux/spi/spi.h | 2 --
6 files changed, 18 insertions(+), 20 deletions(-)
diff --git a/drivers/spi/spi-bitbang-txrx.h b/drivers/spi/spi-bitbang-txrx.h
index 2dcbe166df63..0cab48b7875b 100644
--- a/drivers/spi/spi-bitbang-txrx.h
+++ b/drivers/spi/spi-bitbang-txrx.h
@@ -57,7 +57,7 @@ bitbang_txrx_be_cpha0(struct spi_device *spi,
for (word <<= (32 - bits); likely(bits); bits--) {
/* setup MSB (to slave) on trailing edge */
- if ((flags & SPI_MASTER_NO_TX) == 0) {
+ if ((flags & SPI_CONTROLLER_NO_TX) == 0) {
if ((word & (1 << 31)) != oldbit) {
setmosi(spi, word & (1 << 31));
oldbit = word & (1 << 31);
@@ -70,7 +70,7 @@ bitbang_txrx_be_cpha0(struct spi_device *spi,
/* sample MSB (from slave) on leading edge */
word <<= 1;
- if ((flags & SPI_MASTER_NO_RX) == 0)
+ if ((flags & SPI_CONTROLLER_NO_RX) == 0)
word |= getmiso(spi);
setsck(spi, cpol);
}
@@ -90,7 +90,7 @@ bitbang_txrx_be_cpha1(struct spi_device *spi,
/* setup MSB (to slave) on leading edge */
setsck(spi, !cpol);
- if ((flags & SPI_MASTER_NO_TX) == 0) {
+ if ((flags & SPI_CONTROLLER_NO_TX) == 0) {
if ((word & (1 << 31)) != oldbit) {
setmosi(spi, word & (1 << 31));
oldbit = word & (1 << 31);
@@ -103,7 +103,7 @@ bitbang_txrx_be_cpha1(struct spi_device *spi,
/* sample MSB (from slave) on trailing edge */
word <<= 1;
- if ((flags & SPI_MASTER_NO_RX) == 0)
+ if ((flags & SPI_CONTROLLER_NO_RX) == 0)
word |= getmiso(spi);
}
return word;
@@ -122,7 +122,7 @@ bitbang_txrx_le_cpha0(struct spi_device *spi,
for (; likely(bits); bits--) {
/* setup LSB (to slave) on trailing edge */
- if ((flags & SPI_MASTER_NO_TX) == 0) {
+ if ((flags & SPI_CONTROLLER_NO_TX) == 0) {
if ((word & 1) != oldbit) {
setmosi(spi, word & 1);
oldbit = word & 1;
@@ -135,7 +135,7 @@ bitbang_txrx_le_cpha0(struct spi_device *spi,
/* sample LSB (from slave) on leading edge */
word >>= 1;
- if ((flags & SPI_MASTER_NO_RX) == 0)
+ if ((flags & SPI_CONTROLLER_NO_RX) == 0)
word |= getmiso(spi) << rxbit;
setsck(spi, cpol);
}
@@ -156,7 +156,7 @@ bitbang_txrx_le_cpha1(struct spi_device *spi,
/* setup LSB (to slave) on leading edge */
setsck(spi, !cpol);
- if ((flags & SPI_MASTER_NO_TX) == 0) {
+ if ((flags & SPI_CONTROLLER_NO_TX) == 0) {
if ((word & 1) != oldbit) {
setmosi(spi, word & 1);
oldbit = word & 1;
@@ -169,7 +169,7 @@ bitbang_txrx_le_cpha1(struct spi_device *spi,
/* sample LSB (from slave) on trailing edge */
word >>= 1;
- if ((flags & SPI_MASTER_NO_RX) == 0)
+ if ((flags & SPI_CONTROLLER_NO_RX) == 0)
word |= getmiso(spi) << rxbit;
}
return word;
diff --git a/drivers/spi/spi-bitbang.c b/drivers/spi/spi-bitbang.c
index 27d0087f8688..862f209cada1 100644
--- a/drivers/spi/spi-bitbang.c
+++ b/drivers/spi/spi-bitbang.c
@@ -248,7 +248,7 @@ static int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t)
if (spi->mode & SPI_3WIRE) {
unsigned flags;
- flags = t->tx_buf ? SPI_MASTER_NO_RX : SPI_MASTER_NO_TX;
+ flags = t->tx_buf ? SPI_CONTROLLER_NO_RX : SPI_CONTROLLER_NO_TX;
return cs->txrx_bufs(spi, cs->txrx_word, nsecs, t, flags);
}
return cs->txrx_bufs(spi, cs->txrx_word, nsecs, t, 0);
diff --git a/drivers/spi/spi-gpio.c b/drivers/spi/spi-gpio.c
index 092afc7679d4..85e149ec2910 100644
--- a/drivers/spi/spi-gpio.c
+++ b/drivers/spi/spi-gpio.c
@@ -170,7 +170,7 @@ static u32 spi_gpio_txrx_word_mode3(struct spi_device *spi,
/*
* These functions do not call setmosi or getmiso if respective flag
- * (SPI_MASTER_NO_RX or SPI_MASTER_NO_TX) is set, so they are safe to
+ * (SPI_CONTROLLER_NO_RX or SPI_CONTROLLER_NO_TX) is set, so they are safe to
* call when such pin is not present or defined in the controller.
* A separate set of callbacks is defined to get highest possible
* speed in the generic case (when both MISO and MOSI lines are
@@ -416,11 +416,11 @@ static int spi_gpio_probe(struct platform_device *pdev)
if (!spi_gpio->mosi) {
/* HW configuration without MOSI pin
*
- * No setting SPI_MASTER_NO_RX here - if there is only
+ * No setting SPI_CONTROLLER_NO_RX here - if there is only
* a MOSI pin connected the host can still do RX by
* changing the direction of the line.
*/
- master->flags = SPI_MASTER_NO_TX;
+ master->flags = SPI_CONTROLLER_NO_TX;
}
master->bus_num = pdev->id;
@@ -438,7 +438,7 @@ static int spi_gpio_probe(struct platform_device *pdev)
bb->chipselect = spi_gpio_chipselect;
bb->set_line_direction = spi_gpio_set_direction;
- if (master->flags & SPI_MASTER_NO_TX) {
+ if (master->flags & SPI_CONTROLLER_NO_TX) {
bb->txrx_word[SPI_MODE_0] = spi_gpio_spec_txrx_word_mode0;
bb->txrx_word[SPI_MODE_1] = spi_gpio_spec_txrx_word_mode1;
bb->txrx_word[SPI_MODE_2] = spi_gpio_spec_txrx_word_mode2;
diff --git a/drivers/spi/spi-lp8841-rtc.c b/drivers/spi/spi-lp8841-rtc.c
index 2d436541d6c2..ccaa7a946359 100644
--- a/drivers/spi/spi-lp8841-rtc.c
+++ b/drivers/spi/spi-lp8841-rtc.c
@@ -75,14 +75,14 @@ bitbang_txrx_be_cpha0_lsb(struct spi_lp8841_rtc *data,
for (; likely(bits); bits--) {
/* setup LSB (to slave) on leading edge */
- if ((flags & SPI_MASTER_NO_TX) == 0)
+ if ((flags & SPI_CONTROLLER_NO_TX) == 0)
setmosi(data, (word & 1));
usleep_range(usecs, usecs + 1); /* T(setup) */
/* sample LSB (from slave) on trailing edge */
word >>= 1;
- if ((flags & SPI_MASTER_NO_RX) == 0)
+ if ((flags & SPI_CONTROLLER_NO_RX) == 0)
word |= (getmiso(data) << 31);
setsck(data, !cpol);
@@ -113,7 +113,7 @@ spi_lp8841_rtc_transfer_one(struct spi_master *master,
while (likely(count > 0)) {
word = *tx++;
bitbang_txrx_be_cpha0_lsb(data, 1, 0,
- SPI_MASTER_NO_RX, word, 8);
+ SPI_CONTROLLER_NO_RX, word, 8);
count--;
}
} else if (rx) {
@@ -121,7 +121,7 @@ spi_lp8841_rtc_transfer_one(struct spi_master *master,
writeb(data->state, data->iomem);
while (likely(count > 0)) {
word = bitbang_txrx_be_cpha0_lsb(data, 1, 0,
- SPI_MASTER_NO_TX, word, 8);
+ SPI_CONTROLLER_NO_TX, word, 8);
*rx++ = word;
count--;
}
diff --git a/drivers/spi/spi-xtensa-xtfpga.c b/drivers/spi/spi-xtensa-xtfpga.c
index 24dc845b940e..dbd85d7a1526 100644
--- a/drivers/spi/spi-xtensa-xtfpga.c
+++ b/drivers/spi/spi-xtensa-xtfpga.c
@@ -87,7 +87,7 @@ static int xtfpga_spi_probe(struct platform_device *pdev)
if (!master)
return -ENOMEM;
- master->flags = SPI_MASTER_NO_RX;
+ master->flags = SPI_CONTROLLER_NO_RX;
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 16);
master->bus_num = pdev->dev.id;
master->dev.of_node = pdev->dev.of_node;
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 35fd61070d9b..39e6271b5003 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -1626,8 +1626,6 @@ spi_transfer_is_last(struct spi_controller *ctlr, struct spi_transfer *xfer)
#define spi_master spi_controller
#define SPI_MASTER_HALF_DUPLEX SPI_CONTROLLER_HALF_DUPLEX
-#define SPI_MASTER_NO_RX SPI_CONTROLLER_NO_RX
-#define SPI_MASTER_NO_TX SPI_CONTROLLER_NO_TX
#define SPI_MASTER_MUST_RX SPI_CONTROLLER_MUST_RX
#define SPI_MASTER_MUST_TX SPI_CONTROLLER_MUST_TX
--
2.40.0.1.gaa8946217a0b
More information about the linux-amlogic
mailing list