[PATCH v2 2/2] iio: adc: meson: improve error logging at probe stage

George Stark gnstark at sberdevices.ru
Fri Jul 21 03:23:09 PDT 2023


Add log messages for errors that may occur at probe stage

Signed-off-by: George Stark <gnstark at sberdevices.ru>
---
 drivers/iio/adc/meson_saradc.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c
index 8397a5347f32..11b10459a028 100644
--- a/drivers/iio/adc/meson_saradc.c
+++ b/drivers/iio/adc/meson_saradc.c
@@ -1046,8 +1046,10 @@ static int meson_sar_adc_hw_enable(struct iio_dev *indio_dev)
 	u32 regval;
 
 	ret = meson_sar_adc_lock(indio_dev);
-	if (ret)
+	if (ret) {
+		dev_err(dev, "failed to lock adc\n");
 		goto err_lock;
+	}
 
 	ret = regulator_enable(priv->vref);
 	if (ret < 0) {
@@ -1355,15 +1357,15 @@ static int meson_sar_adc_probe(struct platform_device *pdev)
 
 	priv->regmap = devm_regmap_init_mmio(dev, base, priv->param->regmap_config);
 	if (IS_ERR(priv->regmap))
-		return PTR_ERR(priv->regmap);
+		return dev_err_probe(dev, PTR_ERR(priv->regmap), "failed to init regmap\n");
 
 	irq = irq_of_parse_and_map(dev->of_node, 0);
 	if (!irq)
-		return -EINVAL;
+		return dev_err_probe(dev, -EINVAL, "failed to get irq\n");
 
 	ret = devm_request_irq(dev, irq, meson_sar_adc_irq, IRQF_SHARED, dev_name(dev), indio_dev);
 	if (ret)
-		return ret;
+		return dev_err_probe(dev, ret, "failed to request irq\n");
 
 	priv->clkin = devm_clk_get(dev, "clkin");
 	if (IS_ERR(priv->clkin))
@@ -1385,7 +1387,7 @@ static int meson_sar_adc_probe(struct platform_device *pdev)
 	if (!priv->adc_clk) {
 		ret = meson_sar_adc_clk_init(indio_dev, base);
 		if (ret)
-			return ret;
+			return dev_err_probe(dev, ret, "failed to init internal clk\n");
 	}
 
 	priv->vref = devm_regulator_get(dev, "vref");
@@ -1427,8 +1429,10 @@ static int meson_sar_adc_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, indio_dev);
 
 	ret = iio_device_register(indio_dev);
-	if (ret)
+	if (ret) {
+		dev_err_probe(dev, ret, "failed to register iio device\n");
 		goto err_hw;
+	}
 
 	return 0;
 
-- 
2.38.4




More information about the linux-amlogic mailing list