[PATCH v3 04/14] spi: Remove code duplication in spi_add_device*()

[Andy Shevchenko]

The commit 0c79378c0199 ("spi: add ancillary device support")
added a dozen of duplicating lines of code. We may move them
to the __spi_add_device(). Note, that the code may be called
under the mutex.

Signed-off-by: Andy Shevchenko <andriy.shevchenko at linux.intel.com>
---
 drivers/spi/spi.c | 32 ++++++++++----------------------
 1 file changed, 10 insertions(+), 22 deletions(-)

diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 6d74218cf38e..876d40d2c708 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -631,6 +631,16 @@ static int __spi_add_device(struct spi_device *spi)
 	struct device *dev = ctlr->dev.parent;
 	int status;
 
+	/* Chipselects are numbered 0..max; validate. */
+	if (spi_get_chipselect(spi, 0) >= ctlr->num_chipselect) {
+		dev_err(dev, "cs%d >= max %d\n", spi_get_chipselect(spi, 0),
+			ctlr->num_chipselect);
+		return -EINVAL;
+	}
+
+	/* Set the bus ID string */
+	spi_dev_set_name(spi);
+
 	/*
 	 * We need to make sure there's no other device with this
 	 * chipselect **BEFORE** we call setup(), else we'll trash
@@ -689,19 +699,8 @@ static int __spi_add_device(struct spi_device *spi)
 int spi_add_device(struct spi_device *spi)
 {
 	struct spi_controller *ctlr = spi->controller;
-	struct device *dev = ctlr->dev.parent;
 	int status;
 
-	/* Chipselects are numbered 0..max; validate. */
-	if (spi_get_chipselect(spi, 0) >= ctlr->num_chipselect) {
-		dev_err(dev, "cs%d >= max %d\n", spi_get_chipselect(spi, 0),
-			ctlr->num_chipselect);
-		return -EINVAL;
-	}
-
-	/* Set the bus ID string */
-	spi_dev_set_name(spi);
-
 	mutex_lock(&ctlr->add_lock);
 	status = __spi_add_device(spi);
 	mutex_unlock(&ctlr->add_lock);
@@ -712,17 +711,6 @@ EXPORT_SYMBOL_GPL(spi_add_device);
 static int spi_add_device_locked(struct spi_device *spi)
 {
 	struct spi_controller *ctlr = spi->controller;
-	struct device *dev = ctlr->dev.parent;
-
-	/* Chipselects are numbered 0..max; validate. */
-	if (spi_get_chipselect(spi, 0) >= ctlr->num_chipselect) {
-		dev_err(dev, "cs%d >= max %d\n", spi_get_chipselect(spi, 0),
-			ctlr->num_chipselect);
-		return -EINVAL;
-	}
-
-	/* Set the bus ID string */
-	spi_dev_set_name(spi);
 
 	WARN_ON(!mutex_is_locked(&ctlr->add_lock));
 	return __spi_add_device(spi);
-- 
2.40.0.1.gaa8946217a0b