[PATCH 0/3] Add binding header file for GPIO interrupt of Amlogic Meson-G12A

[Huqiang Qin]

After adding this binding header file, you can intuitively find
the interrupt number corresponding to each GPIO, and apply it
in the format of IRQID_XXX where it needs to be used.

Associated platforms:
- Amlogic Meson-G12A
- Amlogic Meson-G12B
- Amlogic Meson-SM1

Huqiang Qin (3):
  dt-bindings: interrupt-controller: Add header file for Amlogic
    Meson-G12A SoCs
  pinctrl: Replace the IRQ number in the driver with the IRQID macro
    definition
  arm64: dts: Replace the IRQ number with the IRQID macro definition

 .../boot/dts/amlogic/meson-g12-common.dtsi    |   1 +
 .../boot/dts/amlogic/meson-g12a-x96-max.dts   |   2 +-
 .../dts/amlogic/meson-g12b-bananapi-cm4.dtsi  |   2 +-
 .../boot/dts/amlogic/meson-g12b-bananapi.dtsi |   2 +-
 .../amlogic/meson-g12b-odroid-go-ultra.dts    |   4 +-
 .../dts/amlogic/meson-g12b-odroid-n2.dtsi     |   2 +-
 .../boot/dts/amlogic/meson-g12b-w400.dtsi     |   2 +-
 .../dts/amlogic/meson-sm1-a95xf3-air-gbit.dts |   2 +-
 .../boot/dts/amlogic/meson-sm1-bananapi.dtsi  |   4 +-
 .../boot/dts/amlogic/meson-sm1-h96-max.dts    |   2 +-
 .../boot/dts/amlogic/meson-sm1-odroid.dtsi    |   2 +-
 .../boot/dts/amlogic/meson-sm1-sei610.dts     |  12 +-
 .../dts/amlogic/meson-sm1-x96-air-gbit.dts    |   2 +-
 drivers/pinctrl/meson/pinctrl-meson-g12a.c    |  35 ++---
 .../irq-meson-g12a-gpio.h                     | 126 ++++++++++++++++++
 15 files changed, 164 insertions(+), 36 deletions(-)
 create mode 100644 include/dt-bindings/interrupt-controller/irq-meson-g12a-gpio.h


base-commit: c58c49dd89324b18a812762a2bfa5a0458e4f252
-- 
2.37.1