[PATCH v2 1/2] spi: amlogic-spifc-a1: implement adjust_op_size()

[Neil Armstrong]

On 06/07/2023 13:03, Martin Kurbanov wrote:
> This enhancement eliminates the need for a loop in the
> amlogic_spifc_a1_exec_op() function and allows the SPI core to
> dynamically divide transactions into appropriately sized chunks.
> 
> Signed-off-by: Martin Kurbanov <mmkurbanov at sberdevices.ru>
> ---
>   drivers/spi/spi-amlogic-spifc-a1.c | 66 +++++++++++-------------------
>   1 file changed, 25 insertions(+), 41 deletions(-)
> 
> diff --git a/drivers/spi/spi-amlogic-spifc-a1.c b/drivers/spi/spi-amlogic-spifc-a1.c
> index 3c4224c38399..a92e4fc23396 100644
> --- a/drivers/spi/spi-amlogic-spifc-a1.c
> +++ b/drivers/spi/spi-amlogic-spifc-a1.c
> @@ -72,7 +72,7 @@
>   
>   #define SPIFC_A1_USER_DBUF_ADDR_REG	0x248
>   
> -#define SPIFC_A1_BUFFER_SIZE		512
> +#define SPIFC_A1_BUFFER_SIZE		512U
>   
>   #define SPIFC_A1_MAX_HZ			200000000
>   #define SPIFC_A1_MIN_HZ			1000000
> @@ -240,61 +240,44 @@ static int amlogic_spifc_a1_exec_op(struct spi_mem *mem,
>   {
>   	struct amlogic_spifc_a1 *spifc =
>   		spi_controller_get_devdata(mem->spi->controller);
> -	size_t off, nbytes = op->data.nbytes;
> -	u32 cmd_cfg, addr_cfg, dummy_cfg, dmode;
> +	size_t data_size = op->data.nbytes;
>   	int ret;
>   
>   	amlogic_spifc_a1_user_init(spifc);
> +	amlogic_spifc_a1_set_cmd(spifc, SPIFC_A1_USER_CMD(op));
>   
> -	cmd_cfg = SPIFC_A1_USER_CMD(op);
> -	amlogic_spifc_a1_set_cmd(spifc, cmd_cfg);
> +	if (op->addr.nbytes)
> +		amlogic_spifc_a1_set_addr(spifc, op->addr.val,
> +					  SPIFC_A1_USER_ADDR(op));
>   
> -	if (op->addr.nbytes) {
> -		addr_cfg = SPIFC_A1_USER_ADDR(op);
> -		amlogic_spifc_a1_set_addr(spifc, op->addr.val, addr_cfg);
> -	}
> -
> -	if (op->dummy.nbytes) {
> -		dummy_cfg = SPIFC_A1_USER_DUMMY(op);
> -		amlogic_spifc_a1_set_dummy(spifc, dummy_cfg);
> -	}
> -
> -	if (!op->data.nbytes)
> -		return amlogic_spifc_a1_request(spifc, false);
> -
> -	dmode = ilog2(op->data.buswidth);
> -	off = 0;
> -
> -	do {
> -		size_t block_size = min_t(size_t, nbytes, SPIFC_A1_BUFFER_SIZE);
> -
> -		amlogic_spifc_a1_set_cmd(spifc, cmd_cfg);
> +	if (op->dummy.nbytes)
> +		amlogic_spifc_a1_set_dummy(spifc, SPIFC_A1_USER_DUMMY(op));
>   
> -		if (op->addr.nbytes)
> -			amlogic_spifc_a1_set_addr(spifc, op->addr.val + off,
> -						  addr_cfg);
> -
> -		if (op->dummy.nbytes)
> -			amlogic_spifc_a1_set_dummy(spifc, dummy_cfg);
> +	if (data_size) {
> +		u32 mode = ilog2(op->data.buswidth);
>   
>   		writel(0, spifc->base + SPIFC_A1_USER_DBUF_ADDR_REG);
>   
>   		if (op->data.dir == SPI_MEM_DATA_IN)
> -			ret = amlogic_spifc_a1_read(spifc,
> -						    op->data.buf.in + off,
> -						    block_size, dmode);
> +			ret = amlogic_spifc_a1_read(spifc, op->data.buf.in,
> +						    data_size, mode);
>   		else
> -			ret = amlogic_spifc_a1_write(spifc,
> -						     op->data.buf.out + off,
> -						     block_size, dmode);
> -
> -		nbytes -= block_size;
> -		off += block_size;
> -	} while (nbytes != 0 && !ret);
> +			ret = amlogic_spifc_a1_write(spifc, op->data.buf.out,
> +						     data_size, mode);
> +	} else {
> +		ret = amlogic_spifc_a1_request(spifc, false);
> +	}
>   
>   	return ret;
>   }
>   
> +static int amlogic_spifc_a1_adjust_op_size(struct spi_mem *mem,
> +					   struct spi_mem_op *op)
> +{
> +	op->data.nbytes = min(op->data.nbytes, SPIFC_A1_BUFFER_SIZE);
> +	return 0;
> +}
> +
>   static void amlogic_spifc_a1_hw_init(struct amlogic_spifc_a1 *spifc)
>   {
>   	u32 regv;
> @@ -314,6 +297,7 @@ static void amlogic_spifc_a1_hw_init(struct amlogic_spifc_a1 *spifc)
>   
>   static const struct spi_controller_mem_ops amlogic_spifc_a1_mem_ops = {
>   	.exec_op = amlogic_spifc_a1_exec_op,
> +	.adjust_op_size = amlogic_spifc_a1_adjust_op_size,
>   };
>   
>   static int amlogic_spifc_a1_probe(struct platform_device *pdev)

Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>