December 2024 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...

Starting: Sun Dec 1 15:35:32 PST 2024
Ending: Tue Dec 31 08:44:30 PST 2024
Messages: 318

• [openwrt/openwrt] .gitattributes: ignore some whitespace "violations" in .patch files   LEDE Commits
• [openwrt/openwrt] apk: add dependency on wget provider   LEDE Commits
• [openwrt/openwrt] apk: disable tests   LEDE Commits
• [openwrt/openwrt] apk: update to Git HEAD (2024-11-30)   LEDE Commits
• [openwrt/openwrt] arm-trusted-firmware-mediatek: add mt7986-spim-nand-ddr3 build   LEDE Commits
• [openwrt/openwrt] arm-trusted-firmware-stm32: bump to v2.12   LEDE Commits
• [openwrt/openwrt] ath79: add missing compatible for ath9k   LEDE Commits
• [openwrt/openwrt] ath79: add support for KuWfi CPE830(D) / YunCore CPE830(D)   LEDE Commits
• [openwrt/openwrt] ath79: add support for KuWFi N650 CPE   LEDE Commits
• [openwrt/openwrt] ath79: Add support for Sophos AP15C   LEDE Commits
• [openwrt/openwrt] ath79: ap5030dn: use label-mac-device property   LEDE Commits
• [openwrt/openwrt] ath79: change phy-names to only usb   LEDE Commits
• [openwrt/openwrt] ath79: fix ath9k calibration data size for AR9132   LEDE Commits
• [openwrt/openwrt] ath79: fix ath9k calibration data size for AR9132   LEDE Commits
• [openwrt/openwrt] ath79: fix calibration size for AR9287   LEDE Commits
• [openwrt/openwrt] ath79: fix tl-wa eth1 mac   LEDE Commits
• [openwrt/openwrt] ath79: fix tl-wa eth1 mac   LEDE Commits
• [openwrt/openwrt] ath79: gl-e750: use nvmem for mac addresses   LEDE Commits
• [openwrt/openwrt] ath79: nbg6x16: use nvmem   LEDE Commits
• [openwrt/openwrt] ath79: port buffalo WZR-450HP2 from ar71xx   LEDE Commits
• [openwrt/openwrt] ath79: port buffalo WZR-450HP2 from ar71xx   LEDE Commits
• [openwrt/openwrt] ath79: pqi-air-pen: adjust mac addresses   LEDE Commits
• [openwrt/openwrt] ath79: tplink,deco-s4-v2: use nvmem for cal   LEDE Commits
• [openwrt/openwrt] ath79: usb: remove reset names   LEDE Commits
• [openwrt/openwrt] ath79: usb: remove usb- from reset-names   LEDE Commits
• [openwrt/openwrt] ath79: use nvmem for wrong 3e0 cal size   LEDE Commits
• [openwrt/openwrt] ath79: wr2543: add compatible string for wifi   LEDE Commits
• [openwrt/openwrt] base-files: add option to set LED brightness   LEDE Commits
• [openwrt/openwrt] base-files: allow forcing all LEDs to on/off/blink state   LEDE Commits
• [openwrt/openwrt] base-files: fix cleanup after settings restore   LEDE Commits
• [openwrt/openwrt] base-files: fix luci TZ default show zonename   LEDE Commits
• [openwrt/openwrt] base-files: fix shell scope error for the default LED brightness   LEDE Commits
• [openwrt/openwrt] base-files: sysupgrade: add saving list of installed packages for APK   LEDE Commits
• [openwrt/openwrt] bcm27xx-gpu-fw: update to v1.20241126   LEDE Commits
• [openwrt/openwrt] bcm27xx-gpu-fw: update to v1.20241126   LEDE Commits
• [openwrt/openwrt] bcm27xx-utils: update to latest version   LEDE Commits
• [openwrt/openwrt] bcm27xx-utils: update to latest version   LEDE Commits
• [openwrt/openwrt] bcm27xx/bcm2712: add RP1 drivers via kmods   LEDE Commits
• [openwrt/openwrt] bcm27xx/bcm2712: add RP1 drivers via kmods   LEDE Commits
• [openwrt/openwrt] bcm27xx: patches: cherry-pick for RP1 kmods   LEDE Commits
• [openwrt/openwrt] bcm27xx: patches: cherry-pick for RP1 kmods   LEDE Commits
• [openwrt/openwrt] bmips: drop macronix nand block protection patch   LEDE Commits
• [openwrt/openwrt] bmips: drop macronix nand block protection patch   LEDE Commits
• [openwrt/openwrt] bmips: dsl-2750b-b1: fix calibration size   LEDE Commits
• [openwrt/openwrt] bmips: dts: fix pinctrl error   LEDE Commits
• [openwrt/openwrt] bmips: dts: fix pinctrl error   LEDE Commits
• [openwrt/openwrt] bmips: dts: fix pinctrl error   LEDE Commits
• [openwrt/openwrt] bmips: pinctrl-bcm63268: add gpio function   LEDE Commits
• [openwrt/openwrt] bmips: pinctrl-bcm63268: add gpio function   LEDE Commits
• [openwrt/openwrt] bpftool: turn off libbfd feature in host build   LEDE Commits
• [openwrt/openwrt] bpftool: turn off libbfd feature in host build   LEDE Commits
• [openwrt/openwrt] bpftool: Update to v7.5.0   LEDE Commits
• [openwrt/openwrt] build: add locking around dtc call after running mkits.sh   LEDE Commits
• [openwrt/openwrt] build: d1: add SUPPORTED_DEVICES   LEDE Commits
• [openwrt/openwrt] build: d1: add SUPPORTED_DEVICES   LEDE Commits
• [openwrt/openwrt] build: remove targetinfo invalidation based on .config   LEDE Commits
• [openwrt/openwrt] build: Unconditionally append kmod feed for BuildBot   LEDE Commits
• [openwrt/openwrt] build: Unconditionally append kmod feed for BuildBot   LEDE Commits
• [openwrt/openwrt] build: Unconditionally append kmod feed for BuildBot   LEDE Commits
• [openwrt/openwrt] busybox: Fix cron log level to match previous behavior   LEDE Commits
• [openwrt/openwrt] busybox: Fix hexdump applet   LEDE Commits
• [openwrt/openwrt] busybox: fix LTO compiler flags   LEDE Commits
• [openwrt/openwrt] busybox: fix LTO compiler flags   LEDE Commits
• [openwrt/openwrt] busybox: Save shell history into /tmp   LEDE Commits
• [openwrt/openwrt] busybox: update to 1.37.0   LEDE Commits
• [openwrt/openwrt] ccache: Speed up building.   LEDE Commits
• [openwrt/openwrt] config: enable SECCOMP support for loongarch64   LEDE Commits
• [openwrt/openwrt] dnsmasq: pass environment variables to hotplug   LEDE Commits
• [openwrt/openwrt] dropbear: Name pid file by uci section name   LEDE Commits
• [openwrt/openwrt] feeds.conf.default: enable video feed by default   LEDE Commits
• [openwrt/openwrt] firewall4: update to Git HEAD (2024-12-18)   LEDE Commits
• [openwrt/openwrt] firewall4: update to Git HEAD (2024-12-18)   LEDE Commits
• [openwrt/openwrt] fstools: update to latest HEAD   LEDE Commits
• [openwrt/openwrt] generic: add missing CONFIG_LEDS_KTD202X symbol   LEDE Commits
• [openwrt/openwrt] generic: fix BCM54612E suspend/resume backport patch   LEDE Commits
• [openwrt/openwrt] generic: fix BCM54612E suspend/resume backport patch   LEDE Commits
• [openwrt/openwrt] generic: mtd: spinand: add support for FORESEE F35SQA001G   LEDE Commits
• [openwrt/openwrt] generic: mtd: spinand: add support for FORESEE F35SQA001G   LEDE Commits
• [openwrt/openwrt] generic: mtd: spinand: add support for FORESEE F35SQA002G   LEDE Commits
• [openwrt/openwrt] generic: mtd: spinand: add support for FORESEE F35SQA002G   LEDE Commits
• [openwrt/openwrt] hostapd: add radius WISPr rate control AVPs   LEDE Commits
• [openwrt/openwrt] hostapd: add SAE support for wifi-station and optimize PSK file creation   LEDE Commits
• [openwrt/openwrt] hostapd: add SAE support for wifi-station and optimize PSK file creation   LEDE Commits
• [openwrt/openwrt] hostapd: add support for rxkh_file   LEDE Commits
• [openwrt/openwrt] hostapd: add ubus support for wired driver   LEDE Commits
• [openwrt/openwrt] hostapd: enable CONFIG_EAP_PSK   LEDE Commits
• [openwrt/openwrt] hostapd: enable EAP-pwd support only for the SSL variants   LEDE Commits
• [openwrt/openwrt] hostapd: expose owe_transition_ifname inside bss_info method   LEDE Commits
• [openwrt/openwrt] hostapd: fix building mini variants   LEDE Commits
• [openwrt/openwrt] hostapd: fix call to hostapd reload   LEDE Commits
• [openwrt/openwrt] hostapd: fix call to hostapd reload   LEDE Commits
• [openwrt/openwrt] hostapd: fix passing radio parameter in wpa_supplicant calls   LEDE Commits
• [openwrt/openwrt] hostapd: fix passing radio parameter in wpa_supplicant calls   LEDE Commits
• [openwrt/openwrt] hostapd: fix processing mbssid config option   LEDE Commits
• [openwrt/openwrt] include/trusted-firmware-a.mk: remove the no-warn-rwx-segments hack   LEDE Commits
• [openwrt/openwrt] ipq-wifi: update to Git HEAD (2024-12-18)   LEDE Commits
• [openwrt/openwrt] ipq-wifi: update to version 2024-11-28   LEDE Commits
• [openwrt/openwrt] ipq40xx-generic: EN WS-AP3915i remove BLOCKSIZE from image definition   LEDE Commits
• [openwrt/openwrt] ipq40xx-generic: EN WS-AP3915i remove BLOCKSIZE from image definition   LEDE Commits
• [openwrt/openwrt] ipq40xx-generic: ws-ap3915i fix macadress   LEDE Commits
• [openwrt/openwrt] ipq40xx-generic: ws-ap3915i fix macadress   LEDE Commits
• [openwrt/openwrt] ipq40xx: disable SPI DMA for Fritzbox 4040   LEDE Commits
• [openwrt/openwrt] ipq40xx: make GL.iNet A1300 switch functional   LEDE Commits
• [openwrt/openwrt] ipq40xx: orbi: add ethernet0 alias   LEDE Commits
• [openwrt/openwrt] ipq40xx: orbi: add ethernet0 alias   LEDE Commits
• [openwrt/openwrt] ipq40xx: remove default MAC assignments   LEDE Commits
• [openwrt/openwrt] ipq40xx: use PHY to control USB GPIO   LEDE Commits
• [openwrt/openwrt] ipq807x: add support for TP-Link EAP620 HD v1 Specifications: * SoC: Qualcomm IPQ8072A (64-bit Quad-core Arm Cortex-A53 @ 1.4 GHz) * Memory: 2x ESMT M15T4G16256A-DEBG2G (1 GiB DDR3-1866 13-13-13) * Serial Port: 3v3 TTL 115200n8 * Wi-Fi: QCA5054 (4x4 5 GHz 802.11ax) * Wi-Fi: QCN5024 (2x2 2.4 GHz 802.11b/g/n/ax) * Ethernet: AR8031 (10/100/1000BASE-T) * Flash: Winbond W29N01HZSINF (128 MiB) * LEDs: 1x Blue Status (GPIO 42 Active High) * Buttons: 1x Reset (GPIO 50 Active Low)   LEDE Commits
• [openwrt/openwrt] iproute2: fix GCC14 compilation   LEDE Commits
• [openwrt/openwrt] iproute2: update to 6.12.0   LEDE Commits
• [openwrt/openwrt] kernel: add kmod-usb-dwc3-octeon   LEDE Commits
• [openwrt/openwrt] kernel: add kmod-usb-dwc3-octeon   LEDE Commits
• [openwrt/openwrt] kernel: bcm27xx/bcm2712: add RP1 functionality   LEDE Commits
• [openwrt/openwrt] kernel: bcm27xx/bcm2712: add RP1 functionality   LEDE Commits
• [openwrt/openwrt] kernel: bump 6.6 to 6.6.64   LEDE Commits
• [openwrt/openwrt] kernel: bump 6.6 to 6.6.64   LEDE Commits
• [openwrt/openwrt] kernel: bump 6.6 to 6.6.65   LEDE Commits
• [openwrt/openwrt] kernel: bump 6.6 to 6.6.65   LEDE Commits
• [openwrt/openwrt] kernel: bump 6.6 to 6.6.66   LEDE Commits
• [openwrt/openwrt] kernel: bump 6.6 to 6.6.66   LEDE Commits
• [openwrt/openwrt] kernel: bump 6.6 to 6.6.67   LEDE Commits
• [openwrt/openwrt] kernel: bump 6.6 to 6.6.67   LEDE Commits
• [openwrt/openwrt] kernel: bump 6.6 to 6.6.68   LEDE Commits
• [openwrt/openwrt] kernel: bump 6.6 to 6.6.68   LEDE Commits
• [openwrt/openwrt] kernel: crypto: add atmel i2c hw accelerator support   LEDE Commits
• [openwrt/openwrt] kernel: crypto: add atmel i2c hw accelerator support   LEDE Commits
• [openwrt/openwrt] kernel: fallback-sprom: create separate header files   LEDE Commits
• [openwrt/openwrt] kernel: generic: netfilter: nft_set_hash: unaligned atomic read on struct nft_set_ext   LEDE Commits
• [openwrt/openwrt] kernel: generic: netfilter: nft_set_hash: unaligned atomic read on struct nft_set_ext   LEDE Commits
• [openwrt/openwrt] kernel: generic: patch: 802.2+LLC - set transport_header offset   LEDE Commits
• [openwrt/openwrt] kernel: generic: patch: 802.2+LLC - set transport_header offset   LEDE Commits
• [openwrt/openwrt] kernel: generic: tg3: Fix DMA allocations on 57766 devices   LEDE Commits
• [openwrt/openwrt] kernel: generic: tg3: Fix DMA allocations on 57766 devices   LEDE Commits
• [openwrt/openwrt] kernel: leds-gca230718: remove _remove   LEDE Commits
• [openwrt/openwrt] kernel: leds-gca230718: remove old kernel compat   LEDE Commits
• [openwrt/openwrt] kernel: leds-gca230718: remove status variable   LEDE Commits
• [openwrt/openwrt] kernel: leds-gca230718: run through clang-format   LEDE Commits
• [openwrt/openwrt] kernel: leds-gca230718: use shorter priv variable   LEDE Commits
• [openwrt/openwrt] kernel: modules: add support for led-group-multicolor   LEDE Commits
• [openwrt/openwrt] kernel: modules: fix led-group-multi-color patch   LEDE Commits
• [openwrt/openwrt] kernel: netdevices: add driver for Broadcom NetXtreme-C/E   LEDE Commits
• [openwrt/openwrt] kernel: packages: fix building package/devel/perf with -O3   LEDE Commits
• [openwrt/openwrt] kernel: remove custom ath9k_platform.h   LEDE Commits
• [openwrt/openwrt] lantiq/xrx200: move 8M flash devices to a small flash subtarget   LEDE Commits
• [openwrt/openwrt] lantiq/xrx200: move 8M flash devices to a small flash subtarget   LEDE Commits
• [openwrt/openwrt] lantiq: fritz7430: fix PCI ID   LEDE Commits
• [openwrt/openwrt] lantiq: grow kernel partition Zyxel P-2812HNU-F1   LEDE Commits
• [openwrt/openwrt] lantiq: grow kernel partition Zyxel P-2812HNU-F1   LEDE Commits
• [openwrt/openwrt] lantiq: Remove legacy LED migration script   LEDE Commits
• [openwrt/openwrt] lantiq: use nvmem for fritz 736x   LEDE Commits
• [openwrt/openwrt] lantiq: use nvmem for fritz73x0   LEDE Commits
• [openwrt/openwrt] lantiq: use nvmem for tplink tdw89x0   LEDE Commits
• [openwrt/openwrt] lantiq: use regulator for USB GPIO   LEDE Commits
• [openwrt/openwrt] libbpf: Update to v1.5.0   LEDE Commits
• [openwrt/openwrt] linux-firmware: ath11k: add QCA2066 firmware   LEDE Commits
• [openwrt/openwrt] linux-firmware: package MediaTek MT7925 Bluetooth firmware   LEDE Commits
• [openwrt/openwrt] linux-firmware: realtek: add RTL8812AU/RTL8821AU firmware   LEDE Commits
• [openwrt/openwrt] linux-firmware: update to 20241110   LEDE Commits
• [openwrt/openwrt] linux: replace nvmem-cells with nvmem-layout   LEDE Commits
• [openwrt/openwrt] linux: replace u-boot,env with nvmem,layout   LEDE Commits
• [openwrt/openwrt] loongarch64: remove redundant CONFIG_LIST_HARDENED   LEDE Commits
• [openwrt/openwrt] mac80211: ath9k: clean up gpiochip   LEDE Commits
• [openwrt/openwrt] mac80211: ath9k: remove platform leds   LEDE Commits
• [openwrt/openwrt] mac80211: realtek: add RTL8812au/RTL8821au support   LEDE Commits
• [openwrt/openwrt] mac80211: refresh patch for ath12k   LEDE Commits
• [openwrt/openwrt] mac80211: remove ath9k_platform_data   LEDE Commits
• [openwrt/openwrt] mac80211: update to version 6.12.6   LEDE Commits
• [openwrt/openwrt] mbedtls: Deactivate ARIA block cipher by default   LEDE Commits
• [openwrt/openwrt] mbim: sort config variables a little and fix minor bugs   LEDE Commits
• [openwrt/openwrt] mediatek/filogic: add Keenetic KN-3811 support   LEDE Commits
• [openwrt/openwrt] mediatek/filogic: add support for Cudy AP3000 v1   LEDE Commits
• [openwrt/openwrt] mediatek: add Comfast CF-E395AX support by adding an alternative model name   LEDE Commits
• [openwrt/openwrt] mediatek: add Comfast CF-E395AX support by adding an alternative model name   LEDE Commits
• [openwrt/openwrt] mediatek: add pending patches fixing video output on MT7623N   LEDE Commits
• [openwrt/openwrt] mediatek: filogic: Add support for D-Link AQUILA PRO AI M60   LEDE Commits
• [openwrt/openwrt] mediatek: filogic: Add support for D-Link AQUILA PRO AI M60   LEDE Commits
• [openwrt/openwrt] mediatek: filogic: add support for NRadio C8-668GL   LEDE Commits
• [openwrt/openwrt] mediatek: filogic: add support for Tenbay WR3000K   LEDE Commits
• [openwrt/openwrt] mediatek: filogic: bpi-r3: set netdev-name for sfp1 port   LEDE Commits
• [openwrt/openwrt] mediatek: filogic: bpi-r4: set netdev-name for sfp ports   LEDE Commits
• [openwrt/openwrt] mediatek: filogic: enable CONFIG_LEDS_TRIGGER_PATTERN   LEDE Commits
• [openwrt/openwrt] mediatek: filogic: Migrate wifi configuration device paths   LEDE Commits
• [openwrt/openwrt] mediatek: filogic: Migrate wifi configuration device paths   LEDE Commits
• [openwrt/openwrt] mediatek: filogic: prevent faulty mac address assignment   LEDE Commits
• [openwrt/openwrt] mediatek: filogic: prevent faulty mac address assignment   LEDE Commits
• [openwrt/openwrt] mediatek: filogic: support openwrt,netdev-name for renaming interfaces   LEDE Commits
• [openwrt/openwrt] mediatek: MERCUSYS MR90X v1: add OpenWrt U-Boot (UBI) layout   LEDE Commits
• [openwrt/openwrt] mediatek: update openembed som7981 support   LEDE Commits
• [openwrt/openwrt] mediatek: update openembed som7981 support   LEDE Commits
• [openwrt/openwrt] meson: allow using staging python   LEDE Commits
• [openwrt/openwrt] mt76: update to Git HEAD (2024-12-30)   LEDE Commits
• [openwrt/openwrt] mtd: check the return value of malloc and pread   LEDE Commits
• [openwrt/openwrt] mtd: fix resetbc on nand w/ min I/O size > 2048   LEDE Commits
• [openwrt/openwrt] mvebu: fix Linksys power LED   LEDE Commits
• [openwrt/openwrt] mvebu: fix Linksys power LED   LEDE Commits
• [openwrt/openwrt] mvebu: rb5009: add label-mac-device   LEDE Commits
• [openwrt/openwrt] ncm: sort config variables a little and fix minor bugs   LEDE Commits
• [openwrt/openwrt] netfilter: add kmod-nfnetlink-ct{helper,timeout}   LEDE Commits
• [openwrt/openwrt] netfilter: add kmod-nfnetlink-ct{helper,timeout}   LEDE Commits
• [openwrt/openwrt] netfilter: fix bogus reference to `kmod-nf-conntrack-timeout`   LEDE Commits
• [openwrt/openwrt] netfilter: fix bogus reference to `kmod-nf-conntrack-timeout`   LEDE Commits
• [openwrt/openwrt] netifd: check if /sbin/wifi exists before calling it   LEDE Commits
• [openwrt/openwrt] netifd: update to Git 768027c5a7640137857f412f554227abd6160cdd (2024-11-27)   LEDE Commits
• [openwrt/openwrt] netifd: update to Git HEAD (2024-12-17)   LEDE Commits
• [openwrt/openwrt] netifd: update to Git HEAD (2024-12-17)   LEDE Commits
• [openwrt/openwrt] octeon: add kmod-usb-dwc3-octeon to DEFAULT_PACKAGES   LEDE Commits
• [openwrt/openwrt] octeon: add kmod-usb-dwc3-octeon to DEFAULT_PACKAGES   LEDE Commits
• [openwrt/openwrt] octeon: enable AT803x PHY driver   LEDE Commits
• [openwrt/openwrt] octeon: enable AT803x PHY driver   LEDE Commits
• [openwrt/openwrt] OpenWrt v24.10.0-rc1: adjust config defaults   LEDE Commits
• [openwrt/openwrt] OpenWrt v24.10.0-rc1: revert to branch defaults   LEDE Commits
• [openwrt/openwrt] OpenWrt v24.10.0-rc2: adjust config defaults   LEDE Commits
• [openwrt/openwrt] OpenWrt v24.10.0-rc2: revert to branch defaults   LEDE Commits
• [openwrt/openwrt] OpenWrt v24.10.0-rc3: adjust config defaults   LEDE Commits
• [openwrt/openwrt] OpenWrt v24.10.0-rc3: revert to branch defaults   LEDE Commits
• [openwrt/openwrt] OpenWrt v24.10.0-rc4: adjust config defaults   LEDE Commits
• [openwrt/openwrt] OpenWrt v24.10.0-rc4: revert to branch defaults   LEDE Commits
• [openwrt/openwrt] optee-os-stm32: bump to 4.4.0   LEDE Commits
• [openwrt/openwrt] package/firewall: fix config typo   LEDE Commits
• [openwrt/openwrt] procd: add support for reload triggers on data change   LEDE Commits
• [openwrt/openwrt] procd: add support for reload triggers on data change   LEDE Commits
• [openwrt/openwrt] procd: do not overwrite service data by default   LEDE Commits
• [openwrt/openwrt] procd: do not overwrite service data by default   LEDE Commits
• [openwrt/openwrt] procd: update to Git HEAD (2024-12-17)   LEDE Commits
• [openwrt/openwrt] procd: update to Git HEAD (2024-12-17)   LEDE Commits
• [openwrt/openwrt] procd: update to Git HEAD (2024-12-22)   LEDE Commits
• [openwrt/openwrt] procd: update to latest HEAD   LEDE Commits
• [openwrt/openwrt] procd: update to latest HEAD   LEDE Commits
• [openwrt/openwrt] qmi: sort config variables a little and fix minor bugs   LEDE Commits
• [openwrt/openwrt] qualcommax: add kernel cmdline replacement hack   LEDE Commits
• [openwrt/openwrt] qualcommax: enable userspace regulator for ipq60xx as well   LEDE Commits
• [openwrt/openwrt] qualcommax: fix usb regulator supply for RT-AX89X   LEDE Commits
• [openwrt/openwrt] qualcommax: image: cleanup whitespace   LEDE Commits
• [openwrt/openwrt] qualcommax: ipq60xx: add Linksys MR7350 support   LEDE Commits
• [openwrt/openwrt] qualcommax: ipq60xx: add Qihoo 360V6 support   LEDE Commits
• [openwrt/openwrt] qualcommax: ipq60xx: fixes base-files typo   LEDE Commits
• [openwrt/openwrt] qualcommax: ipq60xx: mr7350: remove leftover commented-out LED-s   LEDE Commits
• [openwrt/openwrt] qualcommax: ipq807x: add Netgear DEVICE_VARS   LEDE Commits
• [openwrt/openwrt] qualcommax: ipq807x: add Netgear DEVICE_VARS   LEDE Commits
• [openwrt/openwrt] qualcommax: ipq807x: add support for Linksys MX4300 (LN1301)   LEDE Commits
• [openwrt/openwrt] qualcommax: ipq807x: create generic Linksys MX4x00 dts   LEDE Commits
• [openwrt/openwrt] qualcommax: ipq807x: define configuration for Linksys MX4x00 devices   LEDE Commits
• [openwrt/openwrt] qualcommax: ipq807x: fix mac setup for Linksys MX4200v2   LEDE Commits
• [openwrt/openwrt] qualcommax: ipq807x: remove unnecessary bootargs-append for MX4200   LEDE Commits
• [openwrt/openwrt] qualcommax: refresh config   LEDE Commits
• [openwrt/openwrt] qualcommax: use ath11k_patch_mac for MR7350   LEDE Commits
• [openwrt/openwrt] qualcommax: use PHY regulator for USB GPIO   LEDE Commits
• [openwrt/openwrt] ramips: add support for ASUS 4G-AX56   LEDE Commits
• [openwrt/openwrt] ramips: fix 2.4G wmac eeprom offset for TL-WR902AC v4   LEDE Commits
• [openwrt/openwrt] ramips: fix 2.4G wmac eeprom offset for TL-WR902AC v4   LEDE Commits
• [openwrt/openwrt] ramips: mt7620: add support for THA-103AC (Version v1.0R)   LEDE Commits
• [openwrt/openwrt] ramips: mt762{0,8}: reduce default MMC clock to 24 MHz   LEDE Commits
• [openwrt/openwrt] ramips: mt76x8: add support for Keenetic KN-3211   LEDE Commits
• [openwrt/openwrt] ramips: rt3050: fix wrong compatible   LEDE Commits
• [openwrt/openwrt] realtek: add support for HPE 1920-24G-PoE-370w   LEDE Commits
• [openwrt/openwrt] realtek: add support for HPE 1920-24G-PoE-370w   LEDE Commits
• [openwrt/openwrt] realtek: generate compat_version 2.0 for GS1900   LEDE Commits
• [openwrt/openwrt] realtek: generate compat_version 2.0 for GS1900   LEDE Commits
• [openwrt/openwrt] realtek: merge Zyxel GS1900 firmware partitions   LEDE Commits
• [openwrt/openwrt] realtek: merge Zyxel GS1900 firmware partitions   LEDE Commits
• [openwrt/openwrt] realtek: rtl838x: refactor hpe_1920-24g dts   LEDE Commits
• [openwrt/openwrt] realtek: rtl838x: refactor hpe_1920-24g dts   LEDE Commits
• [openwrt/openwrt] realtek: ZyXEL GS1900-48: drop gpio-restart   LEDE Commits
• [openwrt/openwrt] realtek: ZyXEL GS1900-48: drop gpio-restart   LEDE Commits
• [openwrt/openwrt] Revert "bmips: drop macronix nand block protection patch"   LEDE Commits
• [openwrt/openwrt] Revert "bmips: drop macronix nand block protection patch"   LEDE Commits
• [openwrt/openwrt] Revert "ipq40xx: use PHY to control USB GPIO"   LEDE Commits
• [openwrt/openwrt] Revert "kernel: modules: fix led-group-multi-color patch"   LEDE Commits
• [openwrt/openwrt] rpcd: update to Git HEAD (2024-12-02)   LEDE Commits
• [openwrt/openwrt] rules.mk: Update ccache's compiler check.   LEDE Commits
• [openwrt/openwrt] target/metadata: set OpenWrt One as the default menuconfig target/profile   LEDE Commits
• [openwrt/openwrt] tools/cmake: update to 3.31.2 Release notes: https://cmake.org/cmake/help/latest/release/3.31.html   LEDE Commits
• [openwrt/openwrt] tools/cmake: update to 3.31.3   LEDE Commits
• [openwrt/openwrt] tools/dwarves: update to v1.28   LEDE Commits
• [openwrt/openwrt] trusted-firmware-a.mk: fix release download URL   LEDE Commits
• [openwrt/openwrt] uboot-d1: Adapt BUILD_DEVICES to renamed boards   LEDE Commits
• [openwrt/openwrt] uboot-d1: Adapt BUILD_DEVICES to renamed boards   LEDE Commits
• [openwrt/openwrt] uboot-mediatek: add MERCUSYS MR90X v1 support   LEDE Commits
• [openwrt/openwrt] uboot-mediatek: increase USB probe delay on OpenWrt One   LEDE Commits
• [openwrt/openwrt] uboot-rockchip: fix build with swig 4.3.0   LEDE Commits
• [openwrt/openwrt] uboot-rockchip: fix build with swig 4.3.0   LEDE Commits
• [openwrt/openwrt] uboot-rockchip: increase rng-seed size   LEDE Commits
• [openwrt/openwrt] uboot-stm32: bump to 2024.10   LEDE Commits
• [openwrt/openwrt] ucode: update to Git HEAD (2024-12-06)   LEDE Commits
• [openwrt/openwrt] ucode: update to latest HEAD   LEDE Commits
• [openwrt/openwrt] umdns: update to latest HEAD   LEDE Commits
• [openwrt/openwrt] unetd: add firewall input rule for global port   LEDE Commits
• [openwrt/openwrt] unetd: add firewall input rule for global port   LEDE Commits
• [openwrt/openwrt] unetd: update to Git HEAD (2024-12-16)   LEDE Commits
• [openwrt/openwrt] unetd: update to Git HEAD (2024-12-16)   LEDE Commits
• [openwrt/openwrt] unetd: update to Git HEAD (2024-12-17)   LEDE Commits
• [openwrt/openwrt] unetd: update to Git HEAD (2024-12-17)   LEDE Commits
• [openwrt/openwrt] wifi-scripts: add macaddr_base wifi-device option   LEDE Commits
• [openwrt/openwrt] wifi-scripts: add option to set per-device ifname prefix   LEDE Commits
• [openwrt/openwrt] wifi-scripts: add ucode based iwinfo   LEDE Commits
• [openwrt/openwrt] wifi-scripts: add ucode based scripts   LEDE Commits
• [openwrt/openwrt] wifi-scripts: don't fail on unset PSK   LEDE Commits
• [openwrt/openwrt] wifi-scripts: don't fail on unset PSK   LEDE Commits
• [openwrt/openwrt] wifi-scripts: fix channels array property parsing in ucode script   LEDE Commits
• [openwrt/openwrt] wifi-scripts: fix failing mesh setup with missing wpa_supplicant   LEDE Commits
• [openwrt/openwrt] wifi-scripts: fix failing mesh setup with missing wpa_supplicant   LEDE Commits
• [openwrt/openwrt] wifi-scripts: fix mesh/sta setup with ucode scripts   LEDE Commits
• [openwrt/openwrt] wifi-scripts: fix phy index lookup in device_capabilities   LEDE Commits
• [openwrt/openwrt] wifi-scripts: fix regression with ucode update   LEDE Commits
• [openwrt/openwrt] wifi-scripts: fix roaming setup with ucode scripts   LEDE Commits
• [openwrt/openwrt] wifi-scripts: fix ucode support for referencing wifi devices by phy name   LEDE Commits
• [openwrt/openwrt] wifi-scripts: introduce rxkh_file uci option   LEDE Commits
• [openwrt/openwrt] wifi-scripts: remove leftover legacy (non-netifd) wifi script support   LEDE Commits
• [openwrt/openwrt] wifi-scripts: ucode: append global options on STA interfaces   LEDE Commits
• [openwrt/openwrt] wifi-scripts: ucode: change default behaviour of the vlan_no_bridge option   LEDE Commits
• [openwrt/openwrt] wifi-scripts: ucode: fix parsing of legacy hwmode option   LEDE Commits
• [openwrt/openwrt] wifi-scripts: ucode: iwinfo: skip uninitialized PHYs   LEDE Commits
• [openwrt/openwrt] wifi-scripts: ucode: only set mbssid on ax and be radios   LEDE Commits
• [openwrt/openwrt] wifi-scripts: ucode: remove debug code   LEDE Commits
• [openwrt/openwrt] wifi-scripts: ucode: typo fix   LEDE Commits
• [openwrt/openwrt] wifi-scripts: various minor fixes to the new ucode scripts   LEDE Commits
• [openwrt/openwrt] yafut: Mark as nonshared   LEDE Commits
• [openwrt/openwrt] yafut: Mark as nonshared   LEDE Commits

Last message date: Tue Dec 31 08:44:30 PST 2024
Archived on: Tue Dec 31 08:44:33 PST 2024

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...