[openwrt/openwrt] bcm27xx: patches: cherry-pick for RP1 kmods
LEDE Commits
lede-commits at lists.infradead.org
Sat Dec 28 05:13:19 PST 2024
noltari pushed a commit to openwrt/openwrt.git, branch openwrt-24.10:
https://git.openwrt.org/f4c5d0e77e39a88404da8d3567b6df0b8002fda0
commit f4c5d0e77e39a88404da8d3567b6df0b8002fda0
Author: John Audia <therealgraysky at proton.me>
AuthorDate: Thu Dec 12 15:33:15 2024 -0500
bcm27xx: patches: cherry-pick for RP1 kmods
Cherry-pick patches to support building RP1 modules.
Signed-off-by: John Audia <therealgraysky at proton.me>
Link: https://github.com/openwrt/openwrt/pull/17233
Signed-off-by: Robert Marko <robimarko at gmail.com>
(cherry picked from commit 613dd79d5eabe53f07a7b74cc062d91cfc550403)
---
.../950-1351-mailbox-Add-RP1-mailbox-support.patch | 252 +++
...52-firmware-Add-an-RP1-firmware-interface.patch | 421 +++++
.../950-1353-misc-Add-RP1-PIO-driver.patch | 1385 +++++++++++++++
.../950-1354-fixup-musc-add-RP1-PIO-driver.patch | 29 +
.../950-1355-misc-rp1-pio-Add-an-in-kernel.patch | 1797 ++++++++++++++++++++
.../950-1356-pwm-Add-pwm-pio-rp1-driver.patch | 299 ++++
...rp1-pio-Fix-copy-paste-error-in-pio_rp1.h.patch | 25 +
.../patches-6.6/950-1357-rpi-pio-add-missing.patch | 42 +
.../950-1358-misc-rpi-pio-back-port-some.patch | 39 +
.../950-1359-misc-rp1-pio-Add-FIFO.patch | 215 +++
...p1-pio-Fix-parameter-checks-wihout-client.patch | 25 +
...1394-misc-rp1-pio-Add-compat_ioctl-method.patch | 91 +
...d-support-for-Raspberry-Pi-RP1-ethernet-c.patch | 43 +
...ly-set-PLL_SEC_RST-in-rp1_pll_divider_off.patch | 27 +
...ionalise-the-use-of-the-CLK_IS_CRITICAL-f.patch | 124 ++
...arm64-Fixup-RP1-ethernet-DT-configuration.patch | 50 +
.../950-1427-clk-rp1-Add-RP1_CLK_DMA.patch | 44 +
...28-rp1-clk-Remove-CLK_IGNORE_UNUSED-flags.patch | 59 +
...p1-Use-clk_sys-for-ethernet-hclk-and-pclk.patch | 45 +
...-rp1-Link-RP1-DMA-to-the-associated-clock.patch | 24 +
...-dpi-Add-interlaced-modes-and-PIO-program.patch | 762 +++++++++
...1457-pwm-Improve-PWM_PIO_RP1-dependencies.patch | 22 +
...vert-pwm-Improve-PWM_PIO_RP1-dependencies.patch | 20 +
...p1-dpi-Fix-optional-dependency-on-RP1_PIO.patch | 99 ++
...isc-rp1-pio-Support-larger-data-transfers.patch | 127 ++
.../950-1471-fixup-misc-Add-RP1-PIO-driver.patch | 24 +
...-misc-rp1-pio-More-logical-probe-sequence.patch | 81 +
...p1-pio-Convert-floats-to-24.8-fixed-point.patch | 92 +
...0-1475-misc-rp1-pio-Minor-cosmetic-tweaks.patch | 42 +
...76-misc-rp1-pio-Add-in-kernel-DMA-support.patch | 508 ++++++
.../950-1477-misc-Add-ws2812-pio-rp1-driver.patch | 568 +++++++
.../950-1478-overlays-Add-ws2812-pio-overlay.patch | 107 ++
32 files changed, 7488 insertions(+)
diff --git a/target/linux/bcm27xx/patches-6.6/950-1351-mailbox-Add-RP1-mailbox-support.patch b/target/linux/bcm27xx/patches-6.6/950-1351-mailbox-Add-RP1-mailbox-support.patch
new file mode 100644
index 0000000000..23bdb6a8fb
--- /dev/null
+++ b/target/linux/bcm27xx/patches-6.6/950-1351-mailbox-Add-RP1-mailbox-support.patch
@@ -0,0 +1,252 @@
+From 0d58d8cfb6f989f290d983552fcaa116e582e84a Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil at raspberrypi.com>
+Date: Thu, 31 Oct 2024 17:33:38 +0000
+Subject: [PATCH] mailbox: Add RP1 mailbox support
+
+The Raspberry Pi RP1 includes 2 M3 cores running firmware. This driver
+adds a mailbox communication channel to them via a doorbell and some
+shared memory.
+
+Signed-off-by: Phil Elwell <phil at raspberrypi.com>
+---
+ drivers/mailbox/Kconfig | 9 ++
+ drivers/mailbox/Makefile | 2 +
+ drivers/mailbox/rp1-mailbox.c | 208 ++++++++++++++++++++++++++++++++++
+ 3 files changed, 219 insertions(+)
+ create mode 100644 drivers/mailbox/rp1-mailbox.c
+
+--- a/drivers/mailbox/Kconfig
++++ b/drivers/mailbox/Kconfig
+@@ -295,4 +295,13 @@ config QCOM_IPCC
+ acts as an interrupt controller for receiving interrupts from clients.
+ Say Y here if you want to build this driver.
+
++config MBOX_RP1
++ tristate "RP1 Mailbox"
++ depends on MFD_RP1
++ help
++ An implementation of a mailbox interface to the Raspberry Pi RP1 I/O
++ interface. Although written as a mailbox driver, the hardware only
++ provides an array of 32 doorbells.
++ Say Y here if you want to use the RP1 Mailbox.
++
+ endif
+--- a/drivers/mailbox/Makefile
++++ b/drivers/mailbox/Makefile
+@@ -62,3 +62,5 @@ obj-$(CONFIG_SPRD_MBOX) += sprd-mailbox
+ obj-$(CONFIG_QCOM_IPCC) += qcom-ipcc.o
+
+ obj-$(CONFIG_APPLE_MAILBOX) += apple-mailbox.o
++
++obj-$(CONFIG_MBOX_RP1) += rp1-mailbox.o
+--- /dev/null
++++ b/drivers/mailbox/rp1-mailbox.c
+@@ -0,0 +1,208 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Copyright (C) 2023 Raspberry Pi Ltd.
++ *
++ * Parts of this driver are based on:
++ * - bcm2835-mailbox.c
++ * Copyright (C) 2010,2015 Broadcom
++ * Copyright (C) 2013-2014 Lubomir Rintel
++ * Copyright (C) 2013 Craig McGeachie
++ */
++
++#include <linux/compat.h>
++#include <linux/device.h>
++#include <linux/dma-mapping.h>
++#include <linux/err.h>
++#include <linux/interrupt.h>
++#include <linux/irq.h>
++#include <linux/kernel.h>
++#include <linux/mailbox_controller.h>
++#include <linux/miscdevice.h>
++#include <linux/module.h>
++#include <linux/of_address.h>
++#include <linux/of_irq.h>
++#include <linux/platform_device.h>
++
++/*
++ * RP1's PROC_EVENTS register can generate interrupts on the M3 cores (when
++ * enabled). The 32-bit register is treated as 32 events, all of which share a
++ * common interrupt. HOST_EVENTS is the same in the reverse direction.
++ */
++#define SYSCFG_PROC_EVENTS 0x00000008
++#define SYSCFG_HOST_EVENTS 0x0000000c
++#define SYSCFG_HOST_EVENT_IRQ_EN 0x00000010
++#define SYSCFG_HOST_EVENT_IRQ 0x00000014
++
++#define HW_SET_BITS 0x00002000
++#define HW_CLR_BITS 0x00003000
++
++#define MAX_CHANS 4 /* 32 is the hardware limit */
++
++struct rp1_mbox {
++ void __iomem *regs;
++ unsigned int irq;
++ struct mbox_controller controller;
++};
++
++static struct rp1_mbox *rp1_chan_mbox(struct mbox_chan *chan)
++{
++ return container_of(chan->mbox, struct rp1_mbox, controller);
++}
++
++static unsigned int rp1_chan_event(struct mbox_chan *chan)
++{
++ return (unsigned int)(uintptr_t)chan->con_priv;
++}
++
++static irqreturn_t rp1_mbox_irq(int irq, void *dev_id)
++{
++ struct rp1_mbox *mbox = dev_id;
++ struct mbox_chan *chan;
++ unsigned int doorbell;
++ unsigned int evs;
++
++ evs = readl(mbox->regs + SYSCFG_HOST_EVENT_IRQ);
++ writel(evs, mbox->regs + SYSCFG_HOST_EVENTS + HW_CLR_BITS);
++
++ while (evs) {
++ doorbell = __ffs(evs);
++ chan = &mbox->controller.chans[doorbell];
++ mbox_chan_received_data(chan, NULL);
++ evs &= ~(1 << doorbell);
++ }
++ return IRQ_HANDLED;
++}
++
++static int rp1_send_data(struct mbox_chan *chan, void *data)
++{
++ struct rp1_mbox *mbox = rp1_chan_mbox(chan);
++ unsigned int event = rp1_chan_event(chan);
++
++ writel(event, mbox->regs + SYSCFG_PROC_EVENTS + HW_SET_BITS);
++
++ return 0;
++}
++
++static int rp1_startup(struct mbox_chan *chan)
++{
++ struct rp1_mbox *mbox = rp1_chan_mbox(chan);
++ unsigned int event = rp1_chan_event(chan);
++
++ writel(event, mbox->regs + SYSCFG_HOST_EVENT_IRQ_EN + HW_SET_BITS);
++
++ return 0;
++}
++
++static void rp1_shutdown(struct mbox_chan *chan)
++{
++ struct rp1_mbox *mbox = rp1_chan_mbox(chan);
++ unsigned int event = rp1_chan_event(chan);
++
++ writel(event, mbox->regs + SYSCFG_HOST_EVENT_IRQ_EN + HW_CLR_BITS);
++}
++
++static bool rp1_last_tx_done(struct mbox_chan *chan)
++{
++ struct rp1_mbox *mbox = rp1_chan_mbox(chan);
++ unsigned int event = rp1_chan_event(chan);
++ unsigned int evs;
++
++ evs = readl(mbox->regs + SYSCFG_HOST_EVENT_IRQ);
++
++ return !(evs & event);
++}
++
++static const struct mbox_chan_ops rp1_mbox_chan_ops = {
++ .send_data = rp1_send_data,
++ .startup = rp1_startup,
++ .shutdown = rp1_shutdown,
++ .last_tx_done = rp1_last_tx_done
++};
++
++static struct mbox_chan *rp1_mbox_xlate(struct mbox_controller *mbox,
++ const struct of_phandle_args *spec)
++{
++ struct mbox_chan *chan;
++ unsigned int doorbell;
++
++ if (spec->args_count != 1)
++ return ERR_PTR(-EINVAL);
++
++ doorbell = spec->args[0];
++ if (doorbell >= MAX_CHANS)
++ return ERR_PTR(-EINVAL);
++
++ chan = &mbox->chans[doorbell];
++ if (chan->con_priv)
++ return ERR_PTR(-EBUSY);
++
++ chan->con_priv = (void *)(uintptr_t)(1 << doorbell);
++
++ return chan;
++}
++
++static int rp1_mbox_probe(struct platform_device *pdev)
++{
++ struct device *dev = &pdev->dev;
++ struct mbox_chan *chans;
++ struct rp1_mbox *mbox;
++ int ret = 0;
++
++ mbox = devm_kzalloc(dev, sizeof(*mbox), GFP_KERNEL);
++ if (mbox == NULL)
++ return -ENOMEM;
++
++ ret = devm_request_irq(dev, platform_get_irq(pdev, 0),
++ rp1_mbox_irq, 0, dev_name(dev), mbox);
++ if (ret) {
++ dev_err(dev, "Failed to register a mailbox IRQ handler: %d\n",
++ ret);
++ return -ENODEV;
++ }
++
++ mbox->regs = devm_platform_ioremap_resource(pdev, 0);
++ if (IS_ERR(mbox->regs)) {
++ ret = PTR_ERR(mbox->regs);
++ return ret;
++ }
++
++ chans = devm_kcalloc(dev, MAX_CHANS, sizeof(*chans), GFP_KERNEL);
++ if (!chans)
++ return -ENOMEM;
++
++ mbox->controller.txdone_poll = true;
++ mbox->controller.txpoll_period = 5;
++ mbox->controller.ops = &rp1_mbox_chan_ops;
++ mbox->controller.of_xlate = &rp1_mbox_xlate;
++ mbox->controller.dev = dev;
++ mbox->controller.num_chans = MAX_CHANS;
++ mbox->controller.chans = chans;
++
++ ret = devm_mbox_controller_register(dev, &mbox->controller);
++ if (ret)
++ return ret;
++
++ platform_set_drvdata(pdev, mbox);
++
++ return 0;
++}
++
++static const struct of_device_id rp1_mbox_of_match[] = {
++ { .compatible = "raspberrypi,rp1-mbox", },
++ {},
++};
++MODULE_DEVICE_TABLE(of, rp1_mbox_of_match);
++
++static struct platform_driver rp1_mbox_driver = {
++ .driver = {
++ .name = "rp1-mbox",
++ .of_match_table = rp1_mbox_of_match,
++ },
++ .probe = rp1_mbox_probe,
++};
++
++module_platform_driver(rp1_mbox_driver);
++
++MODULE_AUTHOR("Phil Elwell <phil at raspberrypi.com>");
++MODULE_DESCRIPTION("RP1 mailbox IPC driver");
++MODULE_LICENSE("GPL v2");
diff --git a/target/linux/bcm27xx/patches-6.6/950-1352-firmware-Add-an-RP1-firmware-interface.patch b/target/linux/bcm27xx/patches-6.6/950-1352-firmware-Add-an-RP1-firmware-interface.patch
new file mode 100644
index 0000000000..3a9eb03c94
--- /dev/null
+++ b/target/linux/bcm27xx/patches-6.6/950-1352-firmware-Add-an-RP1-firmware-interface.patch
@@ -0,0 +1,421 @@
+From 67daeadcaa7cee1f4b9df7aa108d199e73f35451 Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil at raspberrypi.com>
+Date: Thu, 31 Oct 2024 17:36:54 +0000
+Subject: [PATCH] firmware: Add an RP1 firmware interface over mbox
+
+The RP1 firmware runs a simple communications channel over some shared
+memory and a mailbox. This driver provides access to that channel.
+
+Signed-off-by: Phil Elwell <phil at raspberrypi.com>
+---
+ drivers/firmware/Kconfig | 9 +
+ drivers/firmware/Makefile | 1 +
+ drivers/firmware/rp1.c | 316 +++++++++++++++++++++++++++++++++++
+ include/linux/rp1-firmware.h | 53 ++++++
+ 4 files changed, 379 insertions(+)
+ create mode 100644 drivers/firmware/rp1.c
+ create mode 100644 include/linux/rp1-firmware.h
+
+--- a/drivers/firmware/Kconfig
++++ b/drivers/firmware/Kconfig
+@@ -153,6 +153,15 @@ config RASPBERRYPI_FIRMWARE
+ This option enables support for communicating with the firmware on the
+ Raspberry Pi.
+
++config FIRMWARE_RP1
++ tristate "RP1 Firmware Driver"
++ depends on MBOX_RP1
++ help
++ The Raspberry Pi RP1 processor presents a firmware
++ interface using shared memory and a mailbox. To enable
++ the driver that communicates with it, say Y. Otherwise,
++ say N.
++
+ config FW_CFG_SYSFS
+ tristate "QEMU fw_cfg device support in sysfs"
+ depends on SYSFS && (ARM || ARM64 || PARISC || PPC_PMAC || SPARC || X86)
+--- a/drivers/firmware/Makefile
++++ b/drivers/firmware/Makefile
+@@ -17,6 +17,7 @@ obj-$(CONFIG_ISCSI_IBFT) += iscsi_ibft.o
+ obj-$(CONFIG_FIRMWARE_MEMMAP) += memmap.o
+ obj-$(CONFIG_MTK_ADSP_IPC) += mtk-adsp-ipc.o
+ obj-$(CONFIG_RASPBERRYPI_FIRMWARE) += raspberrypi.o
++obj-$(CONFIG_FIRMWARE_RP1) += rp1.o
+ obj-$(CONFIG_FW_CFG_SYSFS) += qemu_fw_cfg.o
+ obj-$(CONFIG_QCOM_SCM) += qcom-scm.o
+ qcom-scm-objs += qcom_scm.o qcom_scm-smc.o qcom_scm-legacy.o
+--- /dev/null
++++ b/drivers/firmware/rp1.c
+@@ -0,0 +1,316 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Copyright (C) 2023-24 Raspberry Pi Ltd.
++ *
++ * Parts of this driver are based on:
++ * - raspberrypi.c, by Eric Anholt <eric at anholt.net>
++ * Copyright (C) 2015 Broadcom
++ */
++
++#include <linux/dma-mapping.h>
++#include <linux/kref.h>
++#include <linux/mailbox_client.h>
++#include <linux/module.h>
++#include <linux/of_address.h>
++#include <linux/of_platform.h>
++#include <linux/platform_device.h>
++#include <linux/rp1-firmware.h>
++
++#define RP1_MAILBOX_FIRMWARE 0
++
++enum rp1_firmware_ops {
++ MBOX_SUCCESS = 0x0000,
++ GET_FIRMWARE_VERSION = 0x0001, // na -> 160-bit version
++ GET_FEATURE = 0x0002, // FOURCC -> op base (0 == unsupported), op count
++
++ COMMON_COUNT
++};
++
++struct rp1_firmware {
++ struct mbox_client cl;
++ struct mbox_chan *chan; /* The doorbell channel */
++ uint32_t __iomem *buf; /* The shared buffer */
++ u32 buf_size; /* The size of the shared buffer */
++ struct completion c;
++
++ struct kref consumers;
++};
++
++struct rp1_get_feature_resp {
++ uint32_t op_base;
++ uint32_t op_count;
++};
++
++static DEFINE_MUTEX(transaction_lock);
++
++static const struct of_device_id rp1_firmware_of_match[] = {
++ { .compatible = "raspberrypi,rp1-firmware", },
++ {},
++};
++MODULE_DEVICE_TABLE(of, rp1_firmware_of_match);
++
++static void response_callback(struct mbox_client *cl, void *msg)
++{
++ struct rp1_firmware *fw = container_of(cl, struct rp1_firmware, cl);
++
++ complete(&fw->c);
++}
++
++/*
++ * Sends a request to the RP1 firmware and synchronously waits for the reply.
++ * Returns zero or a positive count of response bytes on success, negative on
++ * error.
++ */
++
++int rp1_firmware_message(struct rp1_firmware *fw, uint16_t op,
++ const void *data, unsigned int data_len,
++ void *resp, unsigned int resp_space)
++{
++ int ret;
++ u32 rc;
++
++ if (data_len + 4 > fw->buf_size)
++ return -EINVAL;
++
++ mutex_lock(&transaction_lock);
++
++ memcpy_toio(&fw->buf[1], data, data_len);
++ writel((op << 16) | data_len, fw->buf);
++
++ reinit_completion(&fw->c);
++ ret = mbox_send_message(fw->chan, NULL);
++ if (ret >= 0) {
++ if (wait_for_completion_timeout(&fw->c, HZ))
++ ret = 0;
++ else
++ ret = -ETIMEDOUT;
++ } else {
++ dev_err(fw->cl.dev, "mbox_send_message returned %d\n", ret);
++ }
++
++ if (ret == 0) {
++ rc = readl(fw->buf);
++ if (rc & 0x80000000) {
++ ret = (int32_t)rc;
++ } else {
++ ret = min(rc, resp_space);
++ memcpy_fromio(resp, &fw->buf[1], ret);
++ }
++ }
++
++ mutex_unlock(&transaction_lock);
++
++ return ret;
++}
++EXPORT_SYMBOL_GPL(rp1_firmware_message);
++
++static void rp1_firmware_delete(struct kref *kref)
++{
++ struct rp1_firmware *fw = container_of(kref, struct rp1_firmware, consumers);
++
++ mbox_free_channel(fw->chan);
++ kfree(fw);
++}
++
++void rp1_firmware_put(struct rp1_firmware *fw)
++{
++ kref_put(&fw->consumers, rp1_firmware_delete);
++}
++EXPORT_SYMBOL_GPL(rp1_firmware_put);
++
++int rp1_firmware_get_feature(struct rp1_firmware *fw, uint32_t fourcc,
++ uint32_t *op_base, uint32_t *op_count)
++{
++ struct rp1_get_feature_resp resp;
++ int ret;
++
++ memset(&resp, 0, sizeof(resp));
++ ret = rp1_firmware_message(fw, GET_FEATURE,
++ &fourcc, sizeof(fourcc),
++ &resp, sizeof(resp));
++ *op_base = resp.op_base;
++ *op_count = resp.op_count;
++ if (ret < 0)
++ return ret;
++ if (ret < sizeof(resp) || !resp.op_base)
++ return -EOPNOTSUPP;
++ return 0;
++}
++EXPORT_SYMBOL_GPL(rp1_firmware_get_feature);
++
++static void devm_rp1_firmware_put(void *data)
++{
++ struct rp1_firmware *fw = data;
++
++ rp1_firmware_put(fw);
++}
++
++/**
++ * rp1_firmware_get - Get pointer to rp1_firmware structure.
++ *
++ * The reference to rp1_firmware has to be released with rp1_firmware_put().
++ *
++ * Returns an error pointer on failure.
++ */
++struct rp1_firmware *rp1_firmware_get(struct device_node *client)
++{
++ const char *match = rp1_firmware_of_match[0].compatible;
++ struct platform_device *pdev;
++ struct device_node *fwnode;
++ struct rp1_firmware *fw;
++
++ if (client) {
++ fwnode = of_parse_phandle(client, "firmware", 0);
++ if (!fwnode)
++ fwnode = of_get_parent(client);
++ if (fwnode && !of_device_is_compatible(fwnode, match)) {
++ of_node_put(fwnode);
++ fwnode = NULL;
++ }
++ }
++
++ if (!fwnode)
++ fwnode = of_find_matching_node(NULL, rp1_firmware_of_match);
++
++ if (!fwnode)
++ return ERR_PTR(-ENOENT);
++
++ pdev = of_find_device_by_node(fwnode);
++ of_node_put(fwnode);
++
++ if (!pdev)
++ return ERR_PTR(-EPROBE_DEFER);
++
++ fw = platform_get_drvdata(pdev);
++ if (!fw)
++ goto err_defer;
++
++ if (!kref_get_unless_zero(&fw->consumers))
++ goto err_defer;
++
++ put_device(&pdev->dev);
++
++ return fw;
++
++err_defer:
++ put_device(&pdev->dev);
++ return ERR_PTR(-EPROBE_DEFER);
++}
++EXPORT_SYMBOL_GPL(rp1_firmware_get);
++
++/**
++ * devm_rp1_firmware_get - Get pointer to rp1_firmware structure.
++ * @firmware_node: Pointer to the firmware Device Tree node.
++ *
++ * Returns NULL is the firmware device is not ready.
++ */
++struct rp1_firmware *devm_rp1_firmware_get(struct device *dev, struct device_node *client)
++{
++ struct rp1_firmware *fw;
++ int ret;
++
++ fw = rp1_firmware_get(client);
++ if (IS_ERR(fw))
++ return fw;
++
++ ret = devm_add_action_or_reset(dev, devm_rp1_firmware_put, fw);
++ if (ret)
++ return ERR_PTR(ret);
++
++ return fw;
++}
++EXPORT_SYMBOL_GPL(devm_rp1_firmware_get);
++
++static int rp1_firmware_probe(struct platform_device *pdev)
++{
++ struct device *dev = &pdev->dev;
++ struct device_node *shmem;
++ struct rp1_firmware *fw;
++ struct resource res;
++ uint32_t version[5];
++ int ret;
++
++ shmem = of_parse_phandle(dev->of_node, "shmem", 0);
++ if (!of_device_is_compatible(shmem, "raspberrypi,rp1-shmem")) {
++ of_node_put(shmem);
++ return -ENXIO;
++ }
++
++ ret = of_address_to_resource(shmem, 0, &res);
++ of_node_put(shmem);
++ if (ret) {
++ dev_err(dev, "failed to get shared memory (%pOF) - %d\n", shmem, ret);
++ return ret;
++ }
++
++ /*
++ * Memory will be freed by rp1_firmware_delete() once all users have
++ * released their firmware handles. Don't use devm_kzalloc() here.
++ */
++ fw = kzalloc(sizeof(*fw), GFP_KERNEL);
++ if (!fw)
++ return -ENOMEM;
++
++ fw->buf_size = resource_size(&res);
++ fw->buf = devm_ioremap(dev, res.start, fw->buf_size);
++ if (!fw->buf) {
++ dev_err(dev, "failed to ioremap shared memory\n");
++ kfree(fw);
++ return -EADDRNOTAVAIL;
++ }
++
++ fw->cl.dev = dev;
++ fw->cl.rx_callback = response_callback;
++ fw->cl.tx_block = false;
++
++ fw->chan = mbox_request_channel(&fw->cl, RP1_MAILBOX_FIRMWARE);
++ if (IS_ERR(fw->chan)) {
++ int ret = PTR_ERR(fw->chan);
++
++ if (ret != -EPROBE_DEFER)
++ dev_err(dev, "Failed to get mbox channel: %d\n", ret);
++ kfree(fw);
++ return ret;
++ }
++
++ init_completion(&fw->c);
++ kref_init(&fw->consumers);
++
++ platform_set_drvdata(pdev, fw);
++
++ ret = rp1_firmware_message(fw, GET_FIRMWARE_VERSION,
++ NULL, 0, &version, sizeof(version));
++ if (ret == sizeof(version)) {
++ dev_info(dev, "RP1 Firmware version %08x%08x%08x%08x%08x\n",
++ version[0], version[1], version[2], version[3], version[4]);
++ ret = 0;
++ } else if (ret >= 0) {
++ ret = -EIO;
++ }
++
++ return ret;
++}
++
++static int rp1_firmware_remove(struct platform_device *pdev)
++{
++ struct rp1_firmware *fw = platform_get_drvdata(pdev);
++
++ rp1_firmware_put(fw);
++
++ return 0;
++}
++
++static struct platform_driver rp1_firmware_driver = {
++ .driver = {
++ .name = "rp1-firmware",
++ .of_match_table = rp1_firmware_of_match,
++ },
++ .probe = rp1_firmware_probe,
++ .remove = rp1_firmware_remove,
++};
++
++module_platform_driver(rp1_firmware_driver);
++
++MODULE_AUTHOR("Phil Elwell <phil at raspberrypi.com>");
++MODULE_DESCRIPTION("RP1 firmware driver");
++MODULE_LICENSE("GPL v2");
+--- /dev/null
++++ b/include/linux/rp1-firmware.h
+@@ -0,0 +1,53 @@
++/* SPDX-License-Identifier: GPL-2.0 */
++/*
++ * Copyright (C) 2023 2023-2024 Raspberry Pi Ltd.
++ */
++
++#ifndef __SOC_RP1_FIRMWARE_H__
++#define __SOC_RP1_FIRMWARE_H__
++
++#include <linux/types.h>
++#include <linux/of_device.h>
++
++#define RP1_FOURCC(s) ((uint32_t)((s[0] << 24) | (s[1] << 16) | (s[2] << 8) | (s[3] << 0)))
++
++struct rp1_firmware;
++
++#if IS_ENABLED(CONFIG_FIRMWARE_RP1)
++int rp1_firmware_message(struct rp1_firmware *fw, uint16_t op,
++ const void *data, unsigned int data_len,
++ void *resp, unsigned int resp_space);
++void rp1_firmware_put(struct rp1_firmware *fw);
++struct rp1_firmware *rp1_firmware_get(struct device_node *fwnode);
++struct rp1_firmware *devm_rp1_firmware_get(struct device *dev, struct device_node *fwnode);
++int rp1_firmware_get_feature(struct rp1_firmware *fw, uint32_t fourcc,
++ uint32_t *op_base, uint32_t *op_count);
++#else
++static inline int rp1_firmware_message(struct rp1_firmware *fw, uint16_t op,
++ const void *data, unsigned int data_len,
++ void *resp, unsigned int resp_space)
++{
++ return -EOPNOTSUPP;
++}
++
++static inline void rp1_firmware_put(struct rp1_firmware *fw) { }
++
++static inline struct rp1_firmware *rp1_firmware_get(struct device_node *fwnode)
++{
++ return NULL;
++}
++
++static inline struct rp1_firmware *devm_rp1_firmware_get(struct device *dev,
++ struct device_node *fwnode)
++{
++ return NULL;
++}
++
++static inline int rp1_firmware_get_feature(struct rp1_firmware *fw, uint32_t fourcc,
++ uint32_t *op_base, uint32_t *op_count)
++{
++ return -EOPNOTSUPP;
++}
++#endif
++
++#endif /* __SOC_RP1_FIRMWARE_H__ */
diff --git a/target/linux/bcm27xx/patches-6.6/950-1353-misc-Add-RP1-PIO-driver.patch b/target/linux/bcm27xx/patches-6.6/950-1353-misc-Add-RP1-PIO-driver.patch
new file mode 100644
index 0000000000..521129b919
--- /dev/null
+++ b/target/linux/bcm27xx/patches-6.6/950-1353-misc-Add-RP1-PIO-driver.patch
@@ -0,0 +1,1385 @@
+From 55fd5c9018e1520d45f08cf08630a493ec7dedea Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil at raspberrypi.com>
+Date: Thu, 31 Oct 2024 18:26:00 +0000
+Subject: [PATCH] misc: Add RP1 PIO driver
+
+Provide remote access to the PIO hardware in RP1. There is a single
+instance, with 4 state machines.
+
+Signed-off-by: Phil Elwell <phil at raspberrypi.com>
+---
+ drivers/misc/Kconfig | 8 +
+ drivers/misc/Makefile | 1 +
+ drivers/misc/rp1-fw-pio.h | 53 ++
+ drivers/misc/rp1-pio.c | 1064 ++++++++++++++++++++++++++++++++
+ include/uapi/misc/rp1_pio_if.h | 212 +++++++
+ 5 files changed, 1338 insertions(+)
+ create mode 100644 drivers/misc/rp1-fw-pio.h
+ create mode 100644 drivers/misc/rp1-pio.c
+ create mode 100644 include/uapi/misc/rp1_pio_if.h
+
+--- a/drivers/misc/Kconfig
++++ b/drivers/misc/Kconfig
+@@ -17,6 +17,14 @@ config BCM2835_SMI
+ Driver for enabling and using Broadcom's Secondary/Slow Memory Interface.
+ Appears as /dev/bcm2835_smi. For ioctl interface see drivers/misc/bcm2835_smi.h
+
++config RP1_PIO
++ tristate "Raspberry Pi RP1 PIO driver"
++ select FIRMWARE_RP1
++ default n
++ help
++ Driver providing control of the Raspberry Pi PIO block, as found in
++ RP1.
++
+ config AD525X_DPOT
+ tristate "Analog Devices Digital Potentiometers"
+ depends on (I2C || SPI) && SYSFS
+--- a/drivers/misc/Makefile
++++ b/drivers/misc/Makefile
+@@ -18,6 +18,7 @@ obj-$(CONFIG_TIFM_7XX1) += tifm_7
+ obj-$(CONFIG_PHANTOM) += phantom.o
+ obj-$(CONFIG_QCOM_COINCELL) += qcom-coincell.o
+ obj-$(CONFIG_QCOM_FASTRPC) += fastrpc.o
++obj-$(CONFIG_RP1_PIO) += rp1-pio.o
+ obj-$(CONFIG_SENSORS_BH1770) += bh1770glc.o
+ obj-$(CONFIG_SENSORS_APDS990X) += apds990x.o
+ obj-$(CONFIG_ENCLOSURE_SERVICES) += enclosure.o
+--- /dev/null
++++ b/drivers/misc/rp1-fw-pio.h
+@@ -0,0 +1,53 @@
++/* SPDX-License-Identifier: GPL-2.0 */
++/*
++ * Copyright (C) 2023 2023-2024 Raspberry Pi Ltd.
++ */
++
++#ifndef __SOC_RP1_FIRMWARE_OPS_H__
++#define __SOC_RP1_FIRMWARE_OPS_H__
++
++#include <linux/rp1-firmware.h>
++
++#define FOURCC_PIO RP1_FOURCC("PIO ")
++
++enum rp1_pio_ops {
++ PIO_CAN_ADD_PROGRAM, // u16 num_instrs, u16 origin -> origin
++ PIO_ADD_PROGRAM, // u16 num_instrs, u16 origin, u16 prog[] -> rc
++ PIO_REMOVE_PROGRAM, // u16 num_instrs, u16 origin
++ PIO_CLEAR_INSTR_MEM, // -
++
++ PIO_SM_CLAIM, // u16 mask -> sm
++ PIO_SM_UNCLAIM, // u16 mask
++ PIO_SM_IS_CLAIMED, // u16 mask -> claimed
++
++ PIO_SM_INIT, // u16 sm, u16 initial_pc, u32 sm_config[4]
++ PIO_SM_SET_CONFIG, // u16 sm, u16 rsvd, u32 sm_config[4]
++ PIO_SM_EXEC, // u16 sm, u16 instr, u8 blocking, u8 rsvd
++ PIO_SM_CLEAR_FIFOS, // u16 sm
++ PIO_SM_SET_CLKDIV, // u16 sm, u16 div_int, u8 div_frac, u8 rsvd
++ PIO_SM_SET_PINS, // u16 sm, u16 rsvd, u32 values, u32 mask
++ PIO_SM_SET_PINDIRS, // u16 sm, u16 rsvd, u32 dirs, u32 mask
++ PIO_SM_SET_ENABLED, // u16 mask, u8 enable, u8 rsvd
++ PIO_SM_RESTART, // u16 mask
++ PIO_SM_CLKDIV_RESTART, // u16 mask
++ PIO_SM_ENABLE_SYNC, // u16 mask
++ PIO_SM_PUT, // u16 sm, u8 blocking, u8 rsvd, u32 data
++ PIO_SM_GET, // u16 sm, u8 blocking, u8 rsvd -> u32 data
++ PIO_SM_SET_DMACTRL, // u16 sm, u16 is_tx, u32 ctrl
++
++ GPIO_INIT, // u16 gpio
++ GPIO_SET_FUNCTION, // u16 gpio, u16 fn
++ GPIO_SET_PULLS, // u16 gpio, u8 up, u8 down
++ GPIO_SET_OUTOVER, // u16 gpio, u16 value
++ GPIO_SET_INOVER, // u16 gpio, u16 value
++ GPIO_SET_OEOVER, // u16 gpio, u16 value
++ GPIO_SET_INPUT_ENABLED, // u16 gpio, u16 value
++ GPIO_SET_DRIVE_STRENGTH, // u16 gpio, u16 value
++
++ READ_HW, // src address, len -> data bytes
++ WRITE_HW, // dst address, data
++
++ PIO_COUNT
++};
++
++#endif
+--- /dev/null
++++ b/drivers/misc/rp1-pio.c
+@@ -0,0 +1,1064 @@
++// SPDX-License-Identifier: GPL-2.0
++// PIO driver for RP1
++//
++// Copyright (C) 2023-2024 Raspberry Pi Ltd.
++//
++// Parts of this driver are based on:
++// - vcio.c, by Noralf Trønnes
++// Copyright (C) 2010 Broadcom
++// Copyright (C) 2015 Noralf Trønnes
++// Copyright (C) 2021 Raspberry Pi (Trading) Ltd.
++// - bcm2835_smi.c & bcm2835_smi_dev.c by Luke Wren
++// Copyright (c) 2015 Raspberry Pi (Trading) Ltd.
++
++#include <linux/cdev.h>
++#include <linux/compat.h>
++#include <linux/device.h>
++#include <linux/dmaengine.h>
++#include <linux/dma-mapping.h>
++#include <linux/fs.h>
++#include <linux/init.h>
++#include <linux/ioctl.h>
++#include <linux/module.h>
++#include <linux/rp1-firmware.h>
++#include <linux/semaphore.h>
++#include <linux/slab.h>
++#include <linux/spinlock.h>
++#include <linux/uaccess.h>
++#include <uapi/misc/rp1_pio_if.h>
++
++#include "rp1-fw-pio.h"
++
++#define DRIVER_NAME "rp1-pio"
++
++#define RP1_PIO_SMS_COUNT 4
++#define RP1_PIO_INSTR_COUNT 32
++
++#define MAX_ARG_SIZE 256
++
++#define RP1_PIO_FIFO_TX0 0x00
++#define RP1_PIO_FIFO_TX1 0x04
++#define RP1_PIO_FIFO_TX2 0x08
++#define RP1_PIO_FIFO_TX3 0x0c
++#define RP1_PIO_FIFO_RX0 0x10
++#define RP1_PIO_FIFO_RX1 0x14
++#define RP1_PIO_FIFO_RX2 0x18
++#define RP1_PIO_FIFO_RX3 0x1c
++
++#define RP1_PIO_DMACTRL_DEFAULT 0x80000104
++
++#define HANDLER(_n, _f) \
++ [_IOC_NR(PIO_IOC_ ## _n)] = { #_n, rp1_pio_ ## _f, _IOC_SIZE(PIO_IOC_ ## _n) }
++
++
++#define ROUND_UP(x, y) (((x) + (y) - 1) - (((x) + (y) - 1) % (y)))
++
++#define DMA_BOUNCE_BUFFER_SIZE 0x1000
++#define DMA_BOUNCE_BUFFER_COUNT 4
++
++struct dma_buf_info {
++ void *buf;
++ dma_addr_t phys;
++ struct scatterlist sgl;
++};
++
++struct dma_info {
++ struct semaphore buf_sem;
++ struct dma_chan *chan;
++ size_t buf_size;
++ size_t buf_count;
++ unsigned int head_idx;
++ unsigned int tail_idx;
++ struct dma_buf_info bufs[DMA_BOUNCE_BUFFER_COUNT];
++};
++
++struct rp1_pio_device {
++ struct platform_device *pdev;
++ struct rp1_firmware *fw;
++ uint16_t fw_pio_base;
++ uint16_t fw_pio_count;
++ dev_t dev_num;
++ struct class *dev_class;
++ struct cdev cdev;
++ phys_addr_t phys_addr;
++ uint32_t claimed_sms;
++ uint32_t claimed_dmas;
++ spinlock_t lock;
++ struct mutex instr_mutex;
++ struct dma_info dma_configs[RP1_PIO_SMS_COUNT][RP1_PIO_DIR_COUNT];
++ uint32_t used_instrs;
++ uint8_t instr_refcounts[RP1_PIO_INSTR_COUNT];
++ uint16_t instrs[RP1_PIO_INSTR_COUNT];
++ uint client_count;
++};
++
++struct rp1_pio_client {
++ struct rp1_pio_device *pio;
++ uint32_t claimed_sms;
++ uint32_t claimed_instrs;
++ uint32_t claimed_dmas;
++};
++
++static struct rp1_pio_device *g_pio;
++
++static int rp1_pio_message(struct rp1_pio_device *pio,
++ uint16_t op, const void *data, unsigned int data_len)
++{
++ uint32_t rc;
++ int ret;
++
++ if (op >= pio->fw_pio_count)
++ return -EOPNOTSUPP;
++ ret = rp1_firmware_message(pio->fw, pio->fw_pio_base + op,
++ data, data_len,
++ &rc, sizeof(rc));
++ if (ret == 4)
++ ret = rc;
++ return ret;
++}
++
++static int rp1_pio_message_resp(struct rp1_pio_device *pio,
++ uint16_t op, const void *data, unsigned int data_len,
++ void *resp, void __user *userbuf, unsigned int resp_len)
++{
++ uint32_t resp_buf[1 + 32];
++ int ret;
++
++ if (op >= pio->fw_pio_count)
++ return -EOPNOTSUPP;
++ if (resp_len + 4 >= sizeof(resp_buf))
++ return -EINVAL;
++ if (!resp && !userbuf)
++ return -EINVAL;
++ ret = rp1_firmware_message(pio->fw, pio->fw_pio_base + op,
++ data, data_len,
++ resp_buf, resp_len + 4);
++ if (ret >= 4 && !resp_buf[0]) {
++ ret -= 4;
++ if (resp)
++ memcpy(resp, &resp_buf[1], ret);
++ else if (copy_to_user(userbuf, &resp_buf[1], ret))
++ ret = -EFAULT;
++ } else if (ret >= 0) {
++ ret = -EIO;
++ }
++ return ret;
++}
++
++static int rp1_pio_read_hw(struct rp1_pio_client *client, void *param)
++{
++ struct rp1_pio_device *pio = client->pio;
++ struct rp1_access_hw_args *args = param;
++
++ return rp1_pio_message_resp(pio, READ_HW,
++ args, 8, NULL, args->data, args->len);
++}
++
++static int rp1_pio_write_hw(struct rp1_pio_client *client, void *param)
++{
++ struct rp1_pio_device *pio = client->pio;
++ struct rp1_access_hw_args *args = param;
++ uint32_t write_buf[32 + 1];
++ int len;
++
++ len = min(args->len, sizeof(write_buf) - 4);
++ write_buf[0] = args->addr;
++ if (copy_from_user(&write_buf[1], args->data, len))
++ return -EFAULT;
++ return rp1_firmware_message(pio->fw, pio->fw_pio_base + WRITE_HW,
++ write_buf, 4 + len, NULL, 0);
++}
++
++static int rp1_pio_find_program(struct rp1_pio_device *pio,
++ struct rp1_pio_add_program_args *prog)
++{
++ uint start, end, prog_size;
++ uint32_t used_mask;
++ uint i;
++
++ start = (prog->origin != RP1_PIO_ORIGIN_ANY) ? prog->origin : 0;
++ end = (prog->origin != RP1_PIO_ORIGIN_ANY) ? prog->origin :
++ (RP1_PIO_INSTRUCTION_COUNT - prog->num_instrs);
++ prog_size = sizeof(prog->instrs[0]) * prog->num_instrs;
++ used_mask = (uint32_t)(~0) >> (32 - prog->num_instrs);
++
++ /* Find the best match */
++ for (i = start; i <= end; i++) {
++ uint32_t mask = used_mask << i;
++
++ if ((pio->used_instrs & mask) != mask)
++ continue;
++ if (!memcmp(pio->instrs + i, prog->instrs, prog_size))
++ return i;
++ }
++
++ return -1;
++}
++
++static int rp1_pio_can_add_program(struct rp1_pio_client *client, void *param)
++{
++ struct rp1_pio_add_program_args *args = param;
++ struct rp1_pio_device *pio = client->pio;
++ int offset;
++
++ if (args->num_instrs > RP1_PIO_INSTR_COUNT ||
++ ((args->origin != RP1_PIO_ORIGIN_ANY) &&
++ (args->origin >= RP1_PIO_INSTR_COUNT ||
++ ((args->origin + args->num_instrs) > RP1_PIO_INSTR_COUNT))))
++ return -EINVAL;
++
++ mutex_lock(&pio->instr_mutex);
++ offset = rp1_pio_find_program(pio, args);
++ mutex_unlock(&pio->instr_mutex);
++ if (offset >= 0)
++ return offset;
++
++ /* Don't send the instructions, just the header */
++ return rp1_pio_message(pio, PIO_CAN_ADD_PROGRAM, args,
++ offsetof(struct rp1_pio_add_program_args, instrs));
++}
++
++static int rp1_pio_add_program(struct rp1_pio_client *client, void *param)
++{
++ struct rp1_pio_add_program_args *args = param;
++ struct rp1_pio_device *pio = client->pio;
++ int offset;
++ uint i;
++
++ if (args->num_instrs > RP1_PIO_INSTR_COUNT ||
++ ((args->origin != RP1_PIO_ORIGIN_ANY) &&
++ (args->origin >= RP1_PIO_INSTR_COUNT ||
++ ((args->origin + args->num_instrs) > RP1_PIO_INSTR_COUNT))))
++ return -EINVAL;
++
++ mutex_lock(&pio->instr_mutex);
++ offset = rp1_pio_find_program(pio, args);
++ if (offset < 0)
++ offset = rp1_pio_message(client->pio, PIO_ADD_PROGRAM, args, sizeof(*args));
++
++ if (offset >= 0) {
++ uint32_t used_mask;
++ uint prog_size;
++
++ used_mask = ((uint32_t)(~0) >> (-args->num_instrs & 0x1f)) << offset;
++ prog_size = sizeof(args->instrs[0]) * args->num_instrs;
++
++ if ((pio->used_instrs & used_mask) != used_mask) {
++ pio->used_instrs |= used_mask;
++ memcpy(pio->instrs + offset, args->instrs, prog_size);
++ }
++ client->claimed_instrs |= used_mask;
++ for (i = 0; i < args->num_instrs; i++)
++ pio->instr_refcounts[offset + i]++;
++ }
++ mutex_unlock(&pio->instr_mutex);
++ return offset;
++}
++
++static void rp1_pio_remove_instrs(struct rp1_pio_device *pio, uint32_t mask)
++{
++ struct rp1_pio_remove_program_args args;
++ uint i;
++
++ mutex_lock(&pio->instr_mutex);
++ args.num_instrs = 0;
++ for (i = 0; ; i++, mask >>= 1) {
++ if ((mask & 1) && pio->instr_refcounts[i] && !--pio->instr_refcounts[i]) {
++ pio->used_instrs &= ~(1 << i);
++ args.num_instrs++;
++ } else if (args.num_instrs) {
++ args.origin = i - args.num_instrs;
++ rp1_pio_message(pio, PIO_REMOVE_PROGRAM, &args, sizeof(args));
++ args.num_instrs = 0;
++ }
++ if (!mask)
++ break;
++ }
++ mutex_unlock(&pio->instr_mutex);
++}
++
++static int rp1_pio_remove_program(struct rp1_pio_client *client, void *param)
++{
++ struct rp1_pio_remove_program_args *args = param;
++ uint32_t used_mask;
++ int ret = -ENOENT;
++
++ if (args->num_instrs > RP1_PIO_INSTR_COUNT ||
++ args->origin >= RP1_PIO_INSTR_COUNT ||
++ (args->origin + args->num_instrs) > RP1_PIO_INSTR_COUNT)
++ return -EINVAL;
++
++ used_mask = ((uint32_t)(~0) >> (32 - args->num_instrs)) << args->origin;
++ if ((client->claimed_instrs & used_mask) == used_mask) {
++ client->claimed_instrs &= ~used_mask;
++ rp1_pio_remove_instrs(client->pio, used_mask);
++ ret = 0;
++ }
++ return ret;
++}
++
++static int rp1_pio_clear_instr_mem(struct rp1_pio_client *client, void *param)
++{
++ struct rp1_pio_device *pio = client->pio;
++
++ mutex_lock(&pio->instr_mutex);
++ (void)rp1_pio_message(client->pio, PIO_CLEAR_INSTR_MEM, NULL, 0);
++ memset(pio->instr_refcounts, 0, sizeof(pio->instr_refcounts));
++ pio->used_instrs = 0;
++ client->claimed_instrs = 0;
++ mutex_unlock(&pio->instr_mutex);
++ return 0;
++}
++
++static int rp1_pio_sm_claim(struct rp1_pio_client *client, void *param)
++{
++ struct rp1_pio_sm_claim_args *args = param;
++ struct rp1_pio_device *pio = client->pio;
++ int ret;
++
++ mutex_lock(&pio->instr_mutex);
++ ret = rp1_pio_message(client->pio, PIO_SM_CLAIM, args, sizeof(*args));
++ if (ret >= 0) {
++ if (args->mask)
++ client->claimed_sms |= args->mask;
++ else
++ client->claimed_sms |= (1 << ret);
++ pio->claimed_sms |= client->claimed_sms;
++ }
++ mutex_unlock(&pio->instr_mutex);
++ return ret;
++}
++
++static int rp1_pio_sm_unclaim(struct rp1_pio_client *client, void *param)
++{
++ struct rp1_pio_sm_claim_args *args = param;
++ struct rp1_pio_device *pio = client->pio;
++
++ mutex_lock(&pio->instr_mutex);
++ (void)rp1_pio_message(client->pio, PIO_SM_UNCLAIM, args, sizeof(*args));
++ client->claimed_sms &= ~args->mask;
++ pio->claimed_sms &= ~args->mask;
++ mutex_unlock(&pio->instr_mutex);
++ return 0;
++}
++
++static int rp1_pio_sm_is_claimed(struct rp1_pio_client *client, void *param)
++{
++ struct rp1_pio_sm_claim_args *args = param;
++
++ return rp1_pio_message(client->pio, PIO_SM_IS_CLAIMED, args, sizeof(*args));
++}
++
++static int rp1_pio_sm_init(struct rp1_pio_client *client, void *param)
++{
++ struct rp1_pio_sm_init_args *args = param;
++
++ return rp1_pio_message(client->pio, PIO_SM_INIT, args, sizeof(*args));
++}
++
++static int rp1_pio_sm_set_config(struct rp1_pio_client *client, void *param)
++{
++ struct rp1_pio_sm_set_config_args *args = param;
++
++ return rp1_pio_message(client->pio, PIO_SM_SET_CONFIG, args, sizeof(*args));
++}
++
++static int rp1_pio_sm_exec(struct rp1_pio_client *client, void *param)
++{
++ struct rp1_pio_sm_exec_args *args = param;
++
++ return rp1_pio_message(client->pio, PIO_SM_EXEC, args, sizeof(*args));
++}
++
++static int rp1_pio_sm_clear_fifos(struct rp1_pio_client *client, void *param)
++{
++ struct rp1_pio_sm_clear_fifos_args *args = param;
++
++ return rp1_pio_message(client->pio, PIO_SM_CLEAR_FIFOS, args, sizeof(*args));
++}
++
++static int rp1_pio_sm_set_clkdiv(struct rp1_pio_client *client, void *param)
++{
++ struct rp1_pio_sm_set_clkdiv_args *args = param;
++
++ return rp1_pio_message(client->pio, PIO_SM_SET_CLKDIV, args, sizeof(*args));
++}
++
++static int rp1_pio_sm_set_pins(struct rp1_pio_client *client, void *param)
++{
++ struct rp1_pio_sm_set_pins_args *args = param;
++
++ return rp1_pio_message(client->pio, PIO_SM_SET_PINS, args, sizeof(*args));
++}
++
++static int rp1_pio_sm_set_pindirs(struct rp1_pio_client *client, void *param)
++{
++ struct rp1_pio_sm_set_pindirs_args *args = param;
++
++ return rp1_pio_message(client->pio, PIO_SM_SET_PINDIRS, args, sizeof(*args));
++}
++
++static int rp1_pio_sm_set_enabled(struct rp1_pio_client *client, void *param)
++{
++ struct rp1_pio_sm_set_enabled_args *args = param;
++
++ return rp1_pio_message(client->pio, PIO_SM_SET_ENABLED, args, sizeof(*args));
++}
++
++static int rp1_pio_sm_restart(struct rp1_pio_client *client, void *param)
++{
++ struct rp1_pio_sm_restart_args *args = param;
++
++ return rp1_pio_message(client->pio, PIO_SM_RESTART, args, sizeof(*args));
++}
++
++static int rp1_pio_sm_clkdiv_restart(struct rp1_pio_client *client, void *param)
++{
++ struct rp1_pio_sm_restart_args *args = param;
++
++ return rp1_pio_message(client->pio, PIO_SM_CLKDIV_RESTART, args, sizeof(*args));
++}
++
++static int rp1_pio_sm_enable_sync(struct rp1_pio_client *client, void *param)
++{
++ struct rp1_pio_sm_enable_sync_args *args = param;
++
++ return rp1_pio_message(client->pio, PIO_SM_ENABLE_SYNC, args, sizeof(*args));
++}
++
++static int rp1_pio_sm_put(struct rp1_pio_client *client, void *param)
++{
++ struct rp1_pio_sm_put_args *args = param;
++
++ return rp1_pio_message(client->pio, PIO_SM_PUT, args, sizeof(*args));
++}
++
++static int rp1_pio_sm_get(struct rp1_pio_client *client, void *param)
++{
++ struct rp1_pio_sm_get_args *args = param;
++ int ret;
++
++ ret = rp1_pio_message_resp(client->pio, PIO_SM_GET, args, sizeof(*args),
++ &args->data, NULL, sizeof(args->data));
++ if (ret >= 0)
++ return offsetof(struct rp1_pio_sm_get_args, data) + ret;
++ return ret;
++}
++
++static int rp1_pio_sm_set_dmactrl(struct rp1_pio_client *client, void *param)
++{
++ struct rp1_pio_sm_set_dmactrl_args *args = param;
++
++ return rp1_pio_message(client->pio, PIO_SM_SET_DMACTRL, args, sizeof(*args));
++}
++
++static int rp1_pio_gpio_init(struct rp1_pio_client *client, void *param)
++{
++ struct rp1_gpio_init_args *args = param;
++
++ return rp1_pio_message(client->pio, GPIO_INIT, args, sizeof(*args));
++}
++
++static int rp1_pio_gpio_set_function(struct rp1_pio_client *client, void *param)
++{
++ struct rp1_gpio_set_function_args *args = param;
++
++ return rp1_pio_message(client->pio, GPIO_SET_FUNCTION, args, sizeof(*args));
++}
++
++static int rp1_pio_gpio_set_pulls(struct rp1_pio_client *client, void *param)
++{
++ struct rp1_gpio_set_pulls_args *args = param;
++
++ return rp1_pio_message(client->pio, GPIO_SET_PULLS, args, sizeof(*args));
++}
++
++static int rp1_pio_gpio_set_outover(struct rp1_pio_client *client, void *param)
++{
++ struct rp1_gpio_set_args *args = param;
++
++ return rp1_pio_message(client->pio, GPIO_SET_OUTOVER, args, sizeof(*args));
++}
++
++static int rp1_pio_gpio_set_inover(struct rp1_pio_client *client, void *param)
++{
++ struct rp1_gpio_set_args *args = param;
++
++ return rp1_pio_message(client->pio, GPIO_SET_INOVER, args, sizeof(*args));
++}
++
++static int rp1_pio_gpio_set_oeover(struct rp1_pio_client *client, void *param)
++{
++ struct rp1_gpio_set_args *args = param;
++
++ return rp1_pio_message(client->pio, GPIO_SET_OEOVER, args, sizeof(*args));
++}
++
++static int rp1_pio_gpio_set_input_enabled(struct rp1_pio_client *client, void *param)
++{
++ struct rp1_gpio_set_args *args = param;
++
++ return rp1_pio_message(client->pio, GPIO_SET_INPUT_ENABLED, args, sizeof(*args));
++}
++
++static int rp1_pio_gpio_set_drive_strength(struct rp1_pio_client *client, void *param)
++{
++ struct rp1_gpio_set_args *args = param;
++
++ return rp1_pio_message(client->pio, GPIO_SET_DRIVE_STRENGTH, args, sizeof(*args));
++}
++
++static void rp1_pio_sm_dma_callback(void *param)
++{
++ struct dma_info *dma = param;
++
++ up(&dma->buf_sem);
++}
++
++static void rp1_pio_sm_dma_free(struct device *dev, struct dma_info *dma)
++{
++ dmaengine_terminate_all(dma->chan);
++ while (dma->buf_count > 0) {
++ dma->buf_count--;
++ dma_free_coherent(dev, ROUND_UP(dma->buf_size, PAGE_SIZE),
++ dma->bufs[dma->buf_count].buf, dma->bufs[dma->buf_count].phys);
++ }
++
++ dma_release_channel(dma->chan);
++}
++
++static int rp1_pio_sm_config_xfer(struct rp1_pio_client *client, void *param)
++{
++ struct rp1_pio_sm_config_xfer_args *args = param;
++ struct rp1_pio_sm_set_dmactrl_args set_dmactrl_args;
++ struct rp1_pio_device *pio = client->pio;
++ struct platform_device *pdev = pio->pdev;
++ struct device *dev = &pdev->dev;
++ struct dma_slave_config config = {};
++ phys_addr_t fifo_addr;
++ struct dma_info *dma;
++ uint32_t dma_mask;
++ char chan_name[4];
++ uint buf_size;
++ int ret = 0;
++
++ if (args->sm >= RP1_PIO_SMS_COUNT || args->dir >= RP1_PIO_DIR_COUNT ||
++ !args->buf_size || (args->buf_size & 3) ||
++ !args->buf_count || args->buf_count > DMA_BOUNCE_BUFFER_COUNT)
++ return -EINVAL;
++
++ dma_mask = 1 << (args->sm * 2 + args->dir);
++
++ dma = &pio->dma_configs[args->sm][args->dir];
++
++ spin_lock(&pio->lock);
++ if (pio->claimed_dmas & dma_mask)
++ rp1_pio_sm_dma_free(dev, dma);
++ pio->claimed_dmas |= dma_mask;
++ client->claimed_dmas |= dma_mask;
++ spin_unlock(&pio->lock);
++
++ dma->buf_size = args->buf_size;
++ /* Round up the allocations */
++ buf_size = ROUND_UP(args->buf_size, PAGE_SIZE);
++ sema_init(&dma->buf_sem, 0);
++
++ /* Allocate and configure a DMA channel */
++ /* Careful - each SM FIFO has its own DREQ value */
++ chan_name[0] = (args->dir == RP1_PIO_DIR_TO_SM) ? 't' : 'r';
++ chan_name[1] = 'x';
++ chan_name[2] = '0' + args->sm;
++ chan_name[3] = '\0';
++
++ dma->chan = dma_request_chan(dev, chan_name);
++ if (IS_ERR(dma->chan))
++ return PTR_ERR(dma->chan);
++
++ /* Alloc and map bounce buffers */
++ for (dma->buf_count = 0; dma->buf_count < args->buf_count; dma->buf_count++) {
++ struct dma_buf_info *dbi = &dma->bufs[dma->buf_count];
++
++ dbi->buf = dma_alloc_coherent(dma->chan->device->dev, buf_size,
++ &dbi->phys, GFP_KERNEL);
++ if (!dbi->buf) {
++ ret = -ENOMEM;
++ goto err_dma_free;
++ }
++ sg_init_table(&dbi->sgl, 1);
++ sg_dma_address(&dbi->sgl) = dbi->phys;
++ }
++
++ fifo_addr = pio->phys_addr;
++ fifo_addr += args->sm * (RP1_PIO_FIFO_TX1 - RP1_PIO_FIFO_TX0);
++ fifo_addr += (args->dir == RP1_PIO_DIR_TO_SM) ? RP1_PIO_FIFO_TX0 : RP1_PIO_FIFO_RX0;
++
++ config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
++ config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
++ config.src_addr = fifo_addr;
++ config.dst_addr = fifo_addr;
++ config.direction = (args->dir == RP1_PIO_DIR_TO_SM) ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM;
++
++ ret = dmaengine_slave_config(dma->chan, &config);
++ if (ret)
++ goto err_dma_free;
++
++ set_dmactrl_args.sm = args->sm;
++ set_dmactrl_args.is_tx = (args->dir == RP1_PIO_DIR_TO_SM);
++ set_dmactrl_args.ctrl = RP1_PIO_DMACTRL_DEFAULT;
++ if (args->dir == RP1_PIO_DIR_FROM_SM)
++ set_dmactrl_args.ctrl = (RP1_PIO_DMACTRL_DEFAULT & ~0x1f) | 1;
++
++ ret = rp1_pio_sm_set_dmactrl(client, &set_dmactrl_args);
++ if (ret)
++ goto err_dma_free;
++
++ return 0;
++
++err_dma_free:
++ rp1_pio_sm_dma_free(dev, dma);
++
++ spin_lock(&pio->lock);
++ client->claimed_dmas &= ~dma_mask;
++ pio->claimed_dmas &= ~dma_mask;
++ spin_unlock(&pio->lock);
++
++ return ret;
++}
++
++static int rp1_pio_sm_tx_user(struct rp1_pio_device *pio, struct dma_info *dma,
++ const void __user *userbuf, size_t bytes)
++{
++ struct platform_device *pdev = pio->pdev;
++ struct dma_async_tx_descriptor *desc;
++ struct device *dev = &pdev->dev;
++ int ret = 0;
++
++ // Clean the slate - we're running synchronously
++ dma->head_idx = 0;
++ dma->tail_idx = 0;
++
++ while (bytes > 0) {
++ size_t copy_bytes = min(bytes, dma->buf_size);
++ struct dma_buf_info *dbi;
++
++ /* grab the next free buffer, waiting if they're all full */
++ if (dma->head_idx - dma->tail_idx == dma->buf_count) {
++ if (down_timeout(&dma->buf_sem,
++ msecs_to_jiffies(1000))) {
++ dev_err(dev, "DMA bounce timed out\n");
++ break;
++ }
++ dma->tail_idx++;
++ }
++
++ dbi = &dma->bufs[dma->head_idx % dma->buf_count];
++
++ sg_dma_len(&dbi->sgl) = copy_bytes;
++
++ ret = copy_from_user(dbi->buf, userbuf, copy_bytes);
++ if (ret < 0)
++ break;
++
++ userbuf += copy_bytes;
++
++ desc = dmaengine_prep_slave_sg(dma->chan, &dbi->sgl, 1,
++ DMA_MEM_TO_DEV,
++ DMA_PREP_INTERRUPT | DMA_CTRL_ACK |
++ DMA_PREP_FENCE);
++ if (!desc) {
++ dev_err(dev, "DMA preparation failedzn");
++ ret = -EIO;
++ break;
++ }
++
++ desc->callback = rp1_pio_sm_dma_callback;
++ desc->callback_param = dma;
++
++ /* Submit the buffer - the callback will kick the semaphore */
++ ret = dmaengine_submit(desc);
++ if (ret < 0)
++ break;
++ ret = 0;
++
++ dma_async_issue_pending(dma->chan);
++
++ dma->head_idx++;
++ bytes -= copy_bytes;
++ }
++
++ // Block for completion
++ while (dma->tail_idx != dma->head_idx) {
++ if (down_timeout(&dma->buf_sem, msecs_to_jiffies(1000))) {
++ dev_err(dev, "DMA wait timed out\n");
++ ret = -ETIMEDOUT;
++ break;
++ }
++ dma->tail_idx++;
++ }
++
++ return ret;
++}
++
++static int rp1_pio_sm_rx_user(struct rp1_pio_device *pio, struct dma_info *dma,
++ void __user *userbuf, size_t bytes)
++{
++ struct platform_device *pdev = pio->pdev;
++ struct dma_async_tx_descriptor *desc;
++ struct device *dev = &pdev->dev;
++ int ret = 0;
++
++ /* Clean the slate - we're running synchronously */
++ dma->head_idx = 0;
++ dma->tail_idx = 0;
++
++ while (bytes || dma->tail_idx != dma->head_idx) {
++ size_t copy_bytes = min(bytes, dma->buf_size);
++ struct dma_buf_info *dbi;
++
++ /*
++ * wait for the next RX to complete if all the buffers are
++ * outstanding or we're finishing up.
++ */
++ if (!bytes || dma->head_idx - dma->tail_idx == dma->buf_count) {
++ if (down_timeout(&dma->buf_sem,
++ msecs_to_jiffies(1000))) {
++ dev_err(dev, "DMA wait timed out");
++ ret = -ETIMEDOUT;
++ break;
++ }
++
++ dbi = &dma->bufs[dma->tail_idx++ % dma->buf_count];
++ ret = copy_to_user(userbuf, dbi->buf, sg_dma_len(&dbi->sgl));
++ if (ret < 0)
++ break;
++ userbuf += sg_dma_len(&dbi->sgl);
++
++ if (!bytes)
++ continue;
++ }
++
++ dbi = &dma->bufs[dma->head_idx % dma->buf_count];
++ sg_dma_len(&dbi->sgl) = copy_bytes;
++ desc = dmaengine_prep_slave_sg(dma->chan, &dbi->sgl, 1,
++ DMA_DEV_TO_MEM,
++ DMA_PREP_INTERRUPT | DMA_CTRL_ACK |
++ DMA_PREP_FENCE);
++ if (!desc) {
++ dev_err(dev, "DMA preparation failed");
++ ret = -EIO;
++ break;
++ }
++
++ desc->callback = rp1_pio_sm_dma_callback;
++ desc->callback_param = dma;
++
++ // Submit the buffer - the callback will kick the semaphore
++
++ ret = dmaengine_submit(desc);
++ if (ret < 0)
++ break;
++
++ dma_async_issue_pending(dma->chan);
++
++ dma->head_idx++;
++ bytes -= copy_bytes;
++ }
++
++ return ret;
++}
++
++static int rp1_pio_sm_xfer_data(struct rp1_pio_client *client, void *param)
++{
++ struct rp1_pio_sm_xfer_data_args *args = param;
++ struct rp1_pio_device *pio = client->pio;
++ struct dma_info *dma;
++
++ if (args->sm >= RP1_PIO_SMS_COUNT || args->dir >= RP1_PIO_DIR_COUNT ||
++ !args->data_bytes || !args->data)
++ return -EINVAL;
++
++ dma = &pio->dma_configs[args->sm][args->dir];
++
++ if (args->dir == RP1_PIO_DIR_TO_SM)
++ return rp1_pio_sm_tx_user(pio, dma, args->data, args->data_bytes);
++ else
++ return rp1_pio_sm_rx_user(pio, dma, args->data, args->data_bytes);
++}
++
++struct handler_info {
++ const char *name;
++ int (*func)(struct rp1_pio_client *client, void *param);
++ int argsize;
++} ioctl_handlers[] = {
++ HANDLER(SM_CONFIG_XFER, sm_config_xfer),
++ HANDLER(SM_XFER_DATA, sm_xfer_data),
++
++ HANDLER(CAN_ADD_PROGRAM, can_add_program),
++ HANDLER(ADD_PROGRAM, add_program),
++ HANDLER(REMOVE_PROGRAM, remove_program),
++ HANDLER(CLEAR_INSTR_MEM, clear_instr_mem),
++
++ HANDLER(SM_CLAIM, sm_claim),
++ HANDLER(SM_UNCLAIM, sm_unclaim),
++ HANDLER(SM_IS_CLAIMED, sm_is_claimed),
++
++ HANDLER(SM_INIT, sm_init),
++ HANDLER(SM_SET_CONFIG, sm_set_config),
++ HANDLER(SM_EXEC, sm_exec),
++ HANDLER(SM_CLEAR_FIFOS, sm_clear_fifos),
++ HANDLER(SM_SET_CLKDIV, sm_set_clkdiv),
++ HANDLER(SM_SET_PINS, sm_set_pins),
++ HANDLER(SM_SET_PINDIRS, sm_set_pindirs),
++ HANDLER(SM_SET_ENABLED, sm_set_enabled),
++ HANDLER(SM_RESTART, sm_restart),
++ HANDLER(SM_CLKDIV_RESTART, sm_clkdiv_restart),
++ HANDLER(SM_ENABLE_SYNC, sm_enable_sync),
++ HANDLER(SM_PUT, sm_put),
++ HANDLER(SM_GET, sm_get),
++ HANDLER(SM_SET_DMACTRL, sm_set_dmactrl),
++
++ HANDLER(GPIO_INIT, gpio_init),
++ HANDLER(GPIO_SET_FUNCTION, gpio_set_function),
++ HANDLER(GPIO_SET_PULLS, gpio_set_pulls),
++ HANDLER(GPIO_SET_OUTOVER, gpio_set_outover),
++ HANDLER(GPIO_SET_INOVER, gpio_set_inover),
++ HANDLER(GPIO_SET_OEOVER, gpio_set_oeover),
++ HANDLER(GPIO_SET_INPUT_ENABLED, gpio_set_input_enabled),
++ HANDLER(GPIO_SET_DRIVE_STRENGTH, gpio_set_drive_strength),
++
++ HANDLER(READ_HW, read_hw),
++ HANDLER(WRITE_HW, write_hw),
++};
++
++static int rp1_pio_open(struct inode *inode, struct file *filp)
++{
++ struct rp1_pio_device *pio = g_pio;
++ struct rp1_pio_client *client;
++
++ client = kzalloc(sizeof(*client), GFP_KERNEL);
++
++ client->pio = pio;
++ filp->private_data = client;
++
++ return 0;
++}
++
++static int rp1_pio_release(struct inode *inode, struct file *filp)
++{
++ struct rp1_pio_client *client = filp->private_data;
++ struct rp1_pio_device *pio = client->pio;
++ uint claimed_dmas = client->claimed_dmas;
++ int i;
++
++ /* Free any allocated resources */
++
++ for (i = 0; claimed_dmas; i++) {
++ uint mask = (1 << i);
++
++ if (claimed_dmas & mask) {
++ struct dma_info *dma = &pio->dma_configs[i >> 1][i & 1];
++
++ claimed_dmas &= ~mask;
++ rp1_pio_sm_dma_free(&pio->pdev->dev, dma);
++ }
++ }
++
++ spin_lock(&pio->lock);
++ pio->claimed_dmas &= ~client->claimed_dmas;
++ spin_unlock(&pio->lock);
++
++ if (client->claimed_sms) {
++ struct rp1_pio_sm_set_enabled_args se_args = {
++ .mask = client->claimed_sms, .enable = 0
++ };
++ struct rp1_pio_sm_claim_args uc_args = {
++ .mask = client->claimed_sms
++ };
++
++ rp1_pio_sm_set_enabled(client, &se_args);
++ rp1_pio_sm_unclaim(client, &uc_args);
++ }
++
++ if (client->claimed_instrs)
++ rp1_pio_remove_instrs(pio, client->claimed_instrs);
++
++ /* Reinitialise the SM? */
++
++ kfree(client);
++
++ return 0;
++}
++
++static long rp1_pio_ioctl(struct file *filp, unsigned int ioctl_num,
++ unsigned long ioctl_param)
++{
++ struct rp1_pio_client *client = filp->private_data;
++ struct device *dev = &client->pio->pdev->dev;
++ void __user *argp = (void __user *)ioctl_param;
++ int nr = _IOC_NR(ioctl_num);
++ int sz = _IOC_SIZE(ioctl_num);
++ struct handler_info *hdlr = &ioctl_handlers[nr];
++ uint32_t argbuf[MAX_ARG_SIZE/sizeof(uint32_t)];
++ int ret;
++
++ if (nr >= ARRAY_SIZE(ioctl_handlers) || !hdlr->func) {
++ dev_err(dev, "unknown ioctl: %x\n", ioctl_num);
++ return -EOPNOTSUPP;
++ }
++
++ if (sz != hdlr->argsize) {
++ dev_err(dev, "wrong %s argsize (expected %d, got %d)\n",
++ hdlr->name, hdlr->argsize, sz);
++ return -EINVAL;
++ }
++
++ if (copy_from_user(argbuf, argp, sz))
++ return -EFAULT;
++
++ ret = (hdlr->func)(client, argbuf);
++ dev_dbg(dev, "%s: %s -> %d\n", __func__, hdlr->name, ret);
++ if (ret > 0) {
++ if (copy_to_user(argp, argbuf, ret))
++ ret = -EFAULT;
++ }
++
++ return ret;
++}
++
++const struct file_operations rp1_pio_fops = {
++ .owner = THIS_MODULE,
++ .open = rp1_pio_open,
++ .release = rp1_pio_release,
++ .unlocked_ioctl = rp1_pio_ioctl,
++};
++
++static int rp1_pio_probe(struct platform_device *pdev)
++{
++ struct device *dev = &pdev->dev;
++ struct resource *ioresource;
++ struct rp1_pio_device *pio;
++ struct rp1_firmware *fw;
++ uint32_t op_count = 0;
++ uint32_t op_base = 0;
++ struct device *cdev;
++ char dev_name[16];
++ void *p;
++ int ret;
++ int i;
++
++ /* Run-time check for a build-time misconfiguration */
++ for (i = 0; i < ARRAY_SIZE(ioctl_handlers); i++) {
++ struct handler_info *hdlr = &ioctl_handlers[i];
++
++ if (WARN_ON(hdlr->argsize > MAX_ARG_SIZE))
++ return -EINVAL;
++ }
++
++ fw = devm_rp1_firmware_get(dev, dev->of_node);
++ if (IS_ERR(fw))
++ return PTR_ERR(fw);
++
++ ret = rp1_firmware_get_feature(fw, FOURCC_PIO, &op_base, &op_count);
++ if (ret < 0)
++ return ret;
++
++ pio = devm_kzalloc(&pdev->dev, sizeof(*pio), GFP_KERNEL);
++ if (!pio)
++ return -ENOMEM;
++
++ platform_set_drvdata(pdev, pio);
++ pio->fw_pio_base = op_base;
++ pio->fw_pio_count = op_count;
++ pio->pdev = pdev;
++ pio->fw = fw;
++ spin_lock_init(&pio->lock);
++ mutex_init(&pio->instr_mutex);
++
++ p = devm_platform_get_and_ioremap_resource(pdev, 0, &ioresource);
++ if (IS_ERR(p))
++ return PTR_ERR(p);
++
++ pio->phys_addr = ioresource->start;
++
++ ret = alloc_chrdev_region(&pio->dev_num, 0, 1, DRIVER_NAME);
++ if (ret < 0) {
++ dev_err(dev, "alloc_chrdev_region failed (rc=%d)\n", ret);
++ goto out_err;
++ }
++
++ cdev_init(&pio->cdev, &rp1_pio_fops);
++ ret = cdev_add(&pio->cdev, pio->dev_num, 1);
++ if (ret) {
++ dev_err(dev, "cdev_add failed (err %d)\n", ret);
++ goto out_unregister;
++ }
++
++ pio->dev_class = class_create(DRIVER_NAME);
++ if (IS_ERR(pio->dev_class)) {
++ ret = PTR_ERR(pio->dev_class);
++ dev_err(dev, "class_create failed (err %d)\n", ret);
++ goto out_cdev_del;
++ }
++ pdev->id = of_alias_get_id(pdev->dev.of_node, "pio");
++ if (pdev->id < 0) {
++ dev_err(dev, "alias is missing\n");
++ return -EINVAL;
++ goto out_class_destroy;
++ }
++ sprintf(dev_name, "pio%d", pdev->id);
++ cdev = device_create(pio->dev_class, NULL, pio->dev_num, NULL, dev_name);
++ if (IS_ERR(cdev)) {
++ ret = PTR_ERR(cdev);
++ dev_err(dev, "%s: device_create failed (err %d)\n", __func__, ret);
++ goto out_class_destroy;
++ }
++
++ g_pio = pio;
++
++ dev_info(dev, "Created instance as %s\n", dev_name);
++ return 0;
++
++out_class_destroy:
++ class_destroy(pio->dev_class);
++
++out_cdev_del:
++ cdev_del(&pio->cdev);
++
++out_unregister:
++ unregister_chrdev_region(pio->dev_num, 1);
++
++out_err:
++ return ret;
++}
++
++static void rp1_pio_remove(struct platform_device *pdev)
++{
++ struct rp1_pio_device *pio = platform_get_drvdata(pdev);
++
++ /* There should be no clients */
++
++ if (g_pio == pio)
++ g_pio = NULL;
++}
++
++static const struct of_device_id rp1_pio_ids[] = {
++ { .compatible = "raspberrypi,rp1-pio" },
++ { }
++};
++MODULE_DEVICE_TABLE(of, rp1_pio_ids);
++
++static struct platform_driver rp1_pio_driver = {
++ .driver = {
++ .name = "rp1-pio",
++ .of_match_table = of_match_ptr(rp1_pio_ids),
++ },
++ .probe = rp1_pio_probe,
++ .remove_new = rp1_pio_remove,
++ .shutdown = rp1_pio_remove,
++};
++
++module_platform_driver(rp1_pio_driver);
++
++MODULE_DESCRIPTION("PIO controller driver for Raspberry Pi RP1");
++MODULE_AUTHOR("Phil Elwell");
++MODULE_LICENSE("GPL");
+--- /dev/null
++++ b/include/uapi/misc/rp1_pio_if.h
+@@ -0,0 +1,212 @@
++/* SPDX-License-Identifier: GPL-2.0 */
++/*
++ * Copyright (c) 2023-24 Raspberry Pi Ltd.
++ * All rights reserved.
++ */
++#ifndef _PIO_RP1_IF_H
++#define _PIO_RP1_IF_H
++
++#include <linux/ioctl.h>
++
++#define RP1_PIO_INSTRUCTION_COUNT 32
++#define RP1_PIO_SM_COUNT 4
++#define RP1_PIO_GPIO_COUNT 28
++#define RP1_GPIO_FUNC_PIO 7
++
++#define RP1_PIO_ORIGIN_ANY ((uint16_t)(~0))
++
++#define RP1_PIO_DIR_TO_SM 0
++#define RP1_PIO_DIR_FROM_SM 1
++#define RP1_PIO_DIR_COUNT 2
++
++typedef struct {
++ uint32_t clkdiv;
++ uint32_t execctrl;
++ uint32_t shiftctrl;
++ uint32_t pinctrl;
++} rp1_pio_sm_config;
++
++struct rp1_pio_add_program_args {
++ uint16_t num_instrs;
++ uint16_t origin;
++ uint16_t instrs[RP1_PIO_INSTRUCTION_COUNT];
++};
++
++struct rp1_pio_remove_program_args {
++ uint16_t num_instrs;
++ uint16_t origin;
++};
++
++struct rp1_pio_sm_claim_args {
++ uint16_t mask;
++};
++
++struct rp1_pio_sm_init_args {
++ uint16_t sm;
++ uint16_t initial_pc;
++ rp1_pio_sm_config config;
++};
++
++struct rp1_pio_sm_set_config_args {
++ uint16_t sm;
++ uint16_t rsvd;
++ rp1_pio_sm_config config;
++};
++
++struct rp1_pio_sm_exec_args {
++ uint16_t sm;
++ uint16_t instr;
++ uint8_t blocking;
++ uint8_t rsvd;
++};
++
++struct rp1_pio_sm_clear_fifos_args {
++ uint16_t sm;
++};
++
++struct rp1_pio_sm_set_clkdiv_args {
++ uint16_t sm;
++ uint16_t div_int;
++ uint8_t div_frac;
++ uint8_t rsvd;
++};
++
++struct rp1_pio_sm_set_pins_args {
++ uint16_t sm;
++ uint16_t rsvd;
++ uint32_t values;
++ uint32_t mask;
++};
++
++struct rp1_pio_sm_set_pindirs_args {
++ uint16_t sm;
++ uint16_t rsvd;
++ uint32_t dirs;
++ uint32_t mask;
++};
++
++struct rp1_pio_sm_set_enabled_args {
++ uint16_t mask;
++ uint8_t enable;
++ uint8_t rsvd;
++};
++
++struct rp1_pio_sm_restart_args {
++ uint16_t mask;
++};
++
++struct rp1_pio_sm_clkdiv_restart_args {
++ uint16_t mask;
++};
++
++struct rp1_pio_sm_enable_sync_args {
++ uint16_t mask;
++};
++
++struct rp1_pio_sm_put_args {
++ uint16_t sm;
++ uint8_t blocking;
++ uint8_t rsvd;
++ uint32_t data;
++};
++
++struct rp1_pio_sm_get_args {
++ uint16_t sm;
++ uint8_t blocking;
++ uint8_t rsvd;
++ uint32_t data; /* IN/OUT */
++};
++
++struct rp1_pio_sm_set_dmactrl_args {
++ uint16_t sm;
++ uint8_t is_tx;
++ uint8_t rsvd;
++ uint32_t ctrl;
++};
++
++struct rp1_gpio_init_args {
++ uint16_t gpio;
++};
++
++struct rp1_gpio_set_function_args {
++ uint16_t gpio;
++ uint16_t fn;
++};
++
++struct rp1_gpio_set_pulls_args {
++ uint16_t gpio;
++ uint8_t up;
++ uint8_t down;
++};
++
++struct rp1_gpio_set_args {
++ uint16_t gpio;
++ uint16_t value;
++};
++
++struct rp1_pio_sm_config_xfer_args {
++ uint16_t sm;
++ uint16_t dir;
++ uint16_t buf_size;
++ uint16_t buf_count;
++};
++
++struct rp1_pio_sm_xfer_data_args {
++ uint16_t sm;
++ uint16_t dir;
++ uint16_t data_bytes;
++ void *data;
++};
++
++struct rp1_access_hw_args {
++ uint32_t addr;
++ uint32_t len;
++ void *data;
++};
++
++#define PIO_IOC_MAGIC 102
++
++#define PIO_IOC_SM_CONFIG_XFER _IOW(PIO_IOC_MAGIC, 0, struct rp1_pio_sm_config_xfer_args)
++#define PIO_IOC_SM_XFER_DATA _IOW(PIO_IOC_MAGIC, 1, struct rp1_pio_sm_xfer_data_args)
++
++#ifdef CONFIG_COMPAT
++//XXX #define PIO_IOC_SM_XFER_DATA32 _IOW(PIO_IOC_MAGIC, 2, struct pio_sm_xfer_data_args)
++#endif
++
++#define PIO_IOC_READ_HW _IOW(PIO_IOC_MAGIC, 8, struct rp1_access_hw_args)
++#define PIO_IOC_WRITE_HW _IOW(PIO_IOC_MAGIC, 9, struct rp1_access_hw_args)
++
++#define PIO_IOC_CAN_ADD_PROGRAM _IOW(PIO_IOC_MAGIC, 10, struct rp1_pio_add_program_args)
++#define PIO_IOC_ADD_PROGRAM _IOW(PIO_IOC_MAGIC, 11, struct rp1_pio_add_program_args)
++#define PIO_IOC_REMOVE_PROGRAM _IOW(PIO_IOC_MAGIC, 12, struct rp1_pio_remove_program_args)
++#define PIO_IOC_CLEAR_INSTR_MEM _IO(PIO_IOC_MAGIC, 13)
++
++#define PIO_IOC_SM_CLAIM _IOW(PIO_IOC_MAGIC, 20, struct rp1_pio_sm_claim_args)
++#define PIO_IOC_SM_UNCLAIM _IOW(PIO_IOC_MAGIC, 21, struct rp1_pio_sm_claim_args)
++#define PIO_IOC_SM_IS_CLAIMED _IOW(PIO_IOC_MAGIC, 22, struct rp1_pio_sm_claim_args)
++
++#define PIO_IOC_SM_INIT _IOW(PIO_IOC_MAGIC, 30, struct rp1_pio_sm_init_args)
++#define PIO_IOC_SM_SET_CONFIG _IOW(PIO_IOC_MAGIC, 31, struct rp1_pio_sm_set_config_args)
++#define PIO_IOC_SM_EXEC _IOW(PIO_IOC_MAGIC, 32, struct rp1_pio_sm_exec_args)
++#define PIO_IOC_SM_CLEAR_FIFOS _IOW(PIO_IOC_MAGIC, 33, struct rp1_pio_sm_clear_fifos_args)
++#define PIO_IOC_SM_SET_CLKDIV _IOW(PIO_IOC_MAGIC, 34, struct rp1_pio_sm_set_clkdiv_args)
++#define PIO_IOC_SM_SET_PINS _IOW(PIO_IOC_MAGIC, 35, struct rp1_pio_sm_set_pins_args)
++#define PIO_IOC_SM_SET_PINDIRS _IOW(PIO_IOC_MAGIC, 36, struct rp1_pio_sm_set_pindirs_args)
++#define PIO_IOC_SM_SET_ENABLED _IOW(PIO_IOC_MAGIC, 37, struct rp1_pio_sm_set_enabled_args)
++#define PIO_IOC_SM_RESTART _IOW(PIO_IOC_MAGIC, 38, struct rp1_pio_sm_restart_args)
++#define PIO_IOC_SM_CLKDIV_RESTART _IOW(PIO_IOC_MAGIC, 39, struct rp1_pio_sm_restart_args)
++#define PIO_IOC_SM_ENABLE_SYNC _IOW(PIO_IOC_MAGIC, 40, struct rp1_pio_sm_enable_sync_args)
++#define PIO_IOC_SM_PUT _IOW(PIO_IOC_MAGIC, 41, struct rp1_pio_sm_put_args)
++#define PIO_IOC_SM_GET _IOWR(PIO_IOC_MAGIC, 42, struct rp1_pio_sm_get_args)
++#define PIO_IOC_SM_SET_DMACTRL _IOW(PIO_IOC_MAGIC, 43, struct rp1_pio_sm_set_dmactrl_args)
++
++#define PIO_IOC_GPIO_INIT _IOW(PIO_IOC_MAGIC, 50, struct rp1_gpio_init_args)
++#define PIO_IOC_GPIO_SET_FUNCTION _IOW(PIO_IOC_MAGIC, 51, struct rp1_gpio_set_function_args)
++#define PIO_IOC_GPIO_SET_PULLS _IOW(PIO_IOC_MAGIC, 52, struct rp1_gpio_set_pulls_args)
++#define PIO_IOC_GPIO_SET_OUTOVER _IOW(PIO_IOC_MAGIC, 53, struct rp1_gpio_set_args)
++#define PIO_IOC_GPIO_SET_INOVER _IOW(PIO_IOC_MAGIC, 54, struct rp1_gpio_set_args)
++#define PIO_IOC_GPIO_SET_OEOVER _IOW(PIO_IOC_MAGIC, 55, struct rp1_gpio_set_args)
++#define PIO_IOC_GPIO_SET_INPUT_ENABLED _IOW(PIO_IOC_MAGIC, 56, struct rp1_gpio_set_args)
++#define PIO_IOC_GPIO_SET_DRIVE_STRENGTH _IOW(PIO_IOC_MAGIC, 57, struct rp1_gpio_set_args)
++
++#endif
diff --git a/target/linux/bcm27xx/patches-6.6/950-1354-fixup-musc-add-RP1-PIO-driver.patch b/target/linux/bcm27xx/patches-6.6/950-1354-fixup-musc-add-RP1-PIO-driver.patch
new file mode 100644
index 0000000000..cd197f7a7b
--- /dev/null
+++ b/target/linux/bcm27xx/patches-6.6/950-1354-fixup-musc-add-RP1-PIO-driver.patch
@@ -0,0 +1,29 @@
+From 1b5acd42281ad102b79f4e1794f0a0cccdafda05 Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil at raspberrypi.com>
+Date: Sat, 16 Nov 2024 16:53:31 +0000
+Subject: [PATCH] fixup! misc: Add RP1 PIO driver
+
+Signed-off-by: Phil Elwell <phil at raspberrypi.com>
+---
+ include/uapi/misc/rp1_pio_if.h | 6 +-----
+ 1 file changed, 1 insertion(+), 5 deletions(-)
+
+--- a/include/uapi/misc/rp1_pio_if.h
++++ b/include/uapi/misc/rp1_pio_if.h
+@@ -1,4 +1,4 @@
+-/* SPDX-License-Identifier: GPL-2.0 */
++/* SPDX-License-Identifier: GPL-2.0 + WITH Linux-syscall-note */
+ /*
+ * Copyright (c) 2023-24 Raspberry Pi Ltd.
+ * All rights reserved.
+@@ -169,10 +169,6 @@ struct rp1_access_hw_args {
+ #define PIO_IOC_SM_CONFIG_XFER _IOW(PIO_IOC_MAGIC, 0, struct rp1_pio_sm_config_xfer_args)
+ #define PIO_IOC_SM_XFER_DATA _IOW(PIO_IOC_MAGIC, 1, struct rp1_pio_sm_xfer_data_args)
+
+-#ifdef CONFIG_COMPAT
+-//XXX #define PIO_IOC_SM_XFER_DATA32 _IOW(PIO_IOC_MAGIC, 2, struct pio_sm_xfer_data_args)
+-#endif
+-
+ #define PIO_IOC_READ_HW _IOW(PIO_IOC_MAGIC, 8, struct rp1_access_hw_args)
+ #define PIO_IOC_WRITE_HW _IOW(PIO_IOC_MAGIC, 9, struct rp1_access_hw_args)
+
diff --git a/target/linux/bcm27xx/patches-6.6/950-1355-misc-rp1-pio-Add-an-in-kernel.patch b/target/linux/bcm27xx/patches-6.6/950-1355-misc-rp1-pio-Add-an-in-kernel.patch
new file mode 100644
index 0000000000..6accaf000e
--- /dev/null
+++ b/target/linux/bcm27xx/patches-6.6/950-1355-misc-rp1-pio-Add-an-in-kernel.patch
@@ -0,0 +1,1797 @@
+From 2819a61eb000c207589c97eef9d69a237c6cfdf3 Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil at raspberrypi.com>
+Date: Fri, 8 Nov 2024 09:31:38 +0000
+Subject: [PATCH] misc: rp1-pio: Add an in-kernel API
+
+The header file linux/pio_rp1.h adds a pico-sdk-like interface to the
+RP1 PIO subsystem for other drivers.
+
+Signed-off-by: Phil Elwell <phil at raspberrypi.com>
+---
+ drivers/misc/rp1-pio.c | 169 ++++--
+ include/linux/pio_instructions.h | 481 +++++++++++++++++
+ include/linux/pio_rp1.h | 873 +++++++++++++++++++++++++++++++
+ 3 files changed, 1474 insertions(+), 49 deletions(-)
+ create mode 100644 include/linux/pio_instructions.h
+ create mode 100644 include/linux/pio_rp1.h
+
+--- a/drivers/misc/rp1-pio.c
++++ b/drivers/misc/rp1-pio.c
+@@ -1,15 +1,17 @@
+ // SPDX-License-Identifier: GPL-2.0
+-// PIO driver for RP1
+-//
+-// Copyright (C) 2023-2024 Raspberry Pi Ltd.
+-//
+-// Parts of this driver are based on:
+-// - vcio.c, by Noralf Trønnes
+-// Copyright (C) 2010 Broadcom
+-// Copyright (C) 2015 Noralf Trønnes
+-// Copyright (C) 2021 Raspberry Pi (Trading) Ltd.
+-// - bcm2835_smi.c & bcm2835_smi_dev.c by Luke Wren
+-// Copyright (c) 2015 Raspberry Pi (Trading) Ltd.
++/*
++ * PIO driver for RP1
++ *
++ * Copyright (C) 2023-2024 Raspberry Pi Ltd.
++ *
++ * Parts of this driver are based on:
++ * - vcio.c, by Noralf Trønnes
++ * Copyright (C) 2010 Broadcom
++ * Copyright (C) 2015 Noralf Trønnes
++ * Copyright (C) 2021 Raspberry Pi (Trading) Ltd.
++ * - bcm2835_smi.c & bcm2835_smi_dev.c by Luke Wren
++ * Copyright (c) 2015 Raspberry Pi (Trading) Ltd.
++ */
+
+ #include <linux/cdev.h>
+ #include <linux/compat.h>
+@@ -97,6 +99,7 @@ struct rp1_pio_client {
+ uint32_t claimed_sms;
+ uint32_t claimed_instrs;
+ uint32_t claimed_dmas;
++ int error;
+ };
+
+ static struct rp1_pio_device *g_pio;
+@@ -195,7 +198,7 @@ static int rp1_pio_find_program(struct r
+ return -1;
+ }
+
+-static int rp1_pio_can_add_program(struct rp1_pio_client *client, void *param)
++int rp1_pio_can_add_program(struct rp1_pio_client *client, void *param)
+ {
+ struct rp1_pio_add_program_args *args = param;
+ struct rp1_pio_device *pio = client->pio;
+@@ -217,8 +220,9 @@ static int rp1_pio_can_add_program(struc
+ return rp1_pio_message(pio, PIO_CAN_ADD_PROGRAM, args,
+ offsetof(struct rp1_pio_add_program_args, instrs));
+ }
++EXPORT_SYMBOL_GPL(rp1_pio_can_add_program);
+
+-static int rp1_pio_add_program(struct rp1_pio_client *client, void *param)
++int rp1_pio_add_program(struct rp1_pio_client *client, void *param)
+ {
+ struct rp1_pio_add_program_args *args = param;
+ struct rp1_pio_device *pio = client->pio;
+@@ -254,6 +258,7 @@ static int rp1_pio_add_program(struct rp
+ mutex_unlock(&pio->instr_mutex);
+ return offset;
+ }
++EXPORT_SYMBOL_GPL(rp1_pio_add_program);
+
+ static void rp1_pio_remove_instrs(struct rp1_pio_device *pio, uint32_t mask)
+ {
+@@ -277,7 +282,7 @@ static void rp1_pio_remove_instrs(struct
+ mutex_unlock(&pio->instr_mutex);
+ }
+
+-static int rp1_pio_remove_program(struct rp1_pio_client *client, void *param)
++int rp1_pio_remove_program(struct rp1_pio_client *client, void *param)
+ {
+ struct rp1_pio_remove_program_args *args = param;
+ uint32_t used_mask;
+@@ -296,8 +301,9 @@ static int rp1_pio_remove_program(struct
+ }
+ return ret;
+ }
++EXPORT_SYMBOL_GPL(rp1_pio_remove_program);
+
+-static int rp1_pio_clear_instr_mem(struct rp1_pio_client *client, void *param)
++int rp1_pio_clear_instr_mem(struct rp1_pio_client *client, void *param)
+ {
+ struct rp1_pio_device *pio = client->pio;
+
+@@ -309,8 +315,9 @@ static int rp1_pio_clear_instr_mem(struc
+ mutex_unlock(&pio->instr_mutex);
+ return 0;
+ }
++EXPORT_SYMBOL_GPL(rp1_pio_clear_instr_mem);
+
+-static int rp1_pio_sm_claim(struct rp1_pio_client *client, void *param)
++int rp1_pio_sm_claim(struct rp1_pio_client *client, void *param)
+ {
+ struct rp1_pio_sm_claim_args *args = param;
+ struct rp1_pio_device *pio = client->pio;
+@@ -328,8 +335,9 @@ static int rp1_pio_sm_claim(struct rp1_p
+ mutex_unlock(&pio->instr_mutex);
+ return ret;
+ }
++EXPORT_SYMBOL_GPL(rp1_pio_sm_claim);
+
+-static int rp1_pio_sm_unclaim(struct rp1_pio_client *client, void *param)
++int rp1_pio_sm_unclaim(struct rp1_pio_client *client, void *param)
+ {
+ struct rp1_pio_sm_claim_args *args = param;
+ struct rp1_pio_device *pio = client->pio;
+@@ -341,99 +349,113 @@ static int rp1_pio_sm_unclaim(struct rp1
+ mutex_unlock(&pio->instr_mutex);
+ return 0;
+ }
++EXPORT_SYMBOL_GPL(rp1_pio_sm_unclaim);
+
+-static int rp1_pio_sm_is_claimed(struct rp1_pio_client *client, void *param)
++int rp1_pio_sm_is_claimed(struct rp1_pio_client *client, void *param)
+ {
+ struct rp1_pio_sm_claim_args *args = param;
+
+ return rp1_pio_message(client->pio, PIO_SM_IS_CLAIMED, args, sizeof(*args));
+ }
++EXPORT_SYMBOL_GPL(rp1_pio_sm_is_claimed);
+
+-static int rp1_pio_sm_init(struct rp1_pio_client *client, void *param)
++int rp1_pio_sm_init(struct rp1_pio_client *client, void *param)
+ {
+ struct rp1_pio_sm_init_args *args = param;
+
+ return rp1_pio_message(client->pio, PIO_SM_INIT, args, sizeof(*args));
+ }
++EXPORT_SYMBOL_GPL(rp1_pio_sm_init);
+
+-static int rp1_pio_sm_set_config(struct rp1_pio_client *client, void *param)
++int rp1_pio_sm_set_config(struct rp1_pio_client *client, void *param)
+ {
+ struct rp1_pio_sm_set_config_args *args = param;
+
+ return rp1_pio_message(client->pio, PIO_SM_SET_CONFIG, args, sizeof(*args));
+ }
++EXPORT_SYMBOL_GPL(rp1_pio_sm_set_config);
+
+-static int rp1_pio_sm_exec(struct rp1_pio_client *client, void *param)
++int rp1_pio_sm_exec(struct rp1_pio_client *client, void *param)
+ {
+ struct rp1_pio_sm_exec_args *args = param;
+
+ return rp1_pio_message(client->pio, PIO_SM_EXEC, args, sizeof(*args));
+ }
++EXPORT_SYMBOL_GPL(rp1_pio_sm_exec);
+
+-static int rp1_pio_sm_clear_fifos(struct rp1_pio_client *client, void *param)
++int rp1_pio_sm_clear_fifos(struct rp1_pio_client *client, void *param)
+ {
+ struct rp1_pio_sm_clear_fifos_args *args = param;
+
+ return rp1_pio_message(client->pio, PIO_SM_CLEAR_FIFOS, args, sizeof(*args));
+ }
++EXPORT_SYMBOL_GPL(rp1_pio_sm_clear_fifos);
+
+-static int rp1_pio_sm_set_clkdiv(struct rp1_pio_client *client, void *param)
++int rp1_pio_sm_set_clkdiv(struct rp1_pio_client *client, void *param)
+ {
+ struct rp1_pio_sm_set_clkdiv_args *args = param;
+
+ return rp1_pio_message(client->pio, PIO_SM_SET_CLKDIV, args, sizeof(*args));
+ }
++EXPORT_SYMBOL_GPL(rp1_pio_sm_set_clkdiv);
+
+-static int rp1_pio_sm_set_pins(struct rp1_pio_client *client, void *param)
++int rp1_pio_sm_set_pins(struct rp1_pio_client *client, void *param)
+ {
+ struct rp1_pio_sm_set_pins_args *args = param;
+
+ return rp1_pio_message(client->pio, PIO_SM_SET_PINS, args, sizeof(*args));
+ }
++EXPORT_SYMBOL_GPL(rp1_pio_sm_set_pins);
+
+-static int rp1_pio_sm_set_pindirs(struct rp1_pio_client *client, void *param)
++int rp1_pio_sm_set_pindirs(struct rp1_pio_client *client, void *param)
+ {
+ struct rp1_pio_sm_set_pindirs_args *args = param;
+
+ return rp1_pio_message(client->pio, PIO_SM_SET_PINDIRS, args, sizeof(*args));
+ }
++EXPORT_SYMBOL_GPL(rp1_pio_sm_set_pindirs);
+
+-static int rp1_pio_sm_set_enabled(struct rp1_pio_client *client, void *param)
++int rp1_pio_sm_set_enabled(struct rp1_pio_client *client, void *param)
+ {
+ struct rp1_pio_sm_set_enabled_args *args = param;
+
+ return rp1_pio_message(client->pio, PIO_SM_SET_ENABLED, args, sizeof(*args));
+ }
++EXPORT_SYMBOL_GPL(rp1_pio_sm_set_enabled);
+
+-static int rp1_pio_sm_restart(struct rp1_pio_client *client, void *param)
++int rp1_pio_sm_restart(struct rp1_pio_client *client, void *param)
+ {
+ struct rp1_pio_sm_restart_args *args = param;
+
+ return rp1_pio_message(client->pio, PIO_SM_RESTART, args, sizeof(*args));
+ }
++EXPORT_SYMBOL_GPL(rp1_pio_sm_restart);
+
+-static int rp1_pio_sm_clkdiv_restart(struct rp1_pio_client *client, void *param)
++int rp1_pio_sm_clkdiv_restart(struct rp1_pio_client *client, void *param)
+ {
+ struct rp1_pio_sm_restart_args *args = param;
+
+ return rp1_pio_message(client->pio, PIO_SM_CLKDIV_RESTART, args, sizeof(*args));
+ }
++EXPORT_SYMBOL_GPL(rp1_pio_sm_clkdiv_restart);
+
+-static int rp1_pio_sm_enable_sync(struct rp1_pio_client *client, void *param)
++int rp1_pio_sm_enable_sync(struct rp1_pio_client *client, void *param)
+ {
+ struct rp1_pio_sm_enable_sync_args *args = param;
+
+ return rp1_pio_message(client->pio, PIO_SM_ENABLE_SYNC, args, sizeof(*args));
+ }
++EXPORT_SYMBOL_GPL(rp1_pio_sm_enable_sync);
+
+-static int rp1_pio_sm_put(struct rp1_pio_client *client, void *param)
++int rp1_pio_sm_put(struct rp1_pio_client *client, void *param)
+ {
+ struct rp1_pio_sm_put_args *args = param;
+
+ return rp1_pio_message(client->pio, PIO_SM_PUT, args, sizeof(*args));
+ }
++EXPORT_SYMBOL_GPL(rp1_pio_sm_put);
+
+-static int rp1_pio_sm_get(struct rp1_pio_client *client, void *param)
++int rp1_pio_sm_get(struct rp1_pio_client *client, void *param)
+ {
+ struct rp1_pio_sm_get_args *args = param;
+ int ret;
+@@ -444,69 +466,79 @@ static int rp1_pio_sm_get(struct rp1_pio
+ return offsetof(struct rp1_pio_sm_get_args, data) + ret;
+ return ret;
+ }
++EXPORT_SYMBOL_GPL(rp1_pio_sm_get);
+
+-static int rp1_pio_sm_set_dmactrl(struct rp1_pio_client *client, void *param)
++int rp1_pio_sm_set_dmactrl(struct rp1_pio_client *client, void *param)
+ {
+ struct rp1_pio_sm_set_dmactrl_args *args = param;
+
+ return rp1_pio_message(client->pio, PIO_SM_SET_DMACTRL, args, sizeof(*args));
+ }
++EXPORT_SYMBOL_GPL(rp1_pio_sm_set_dmactrl);
+
+-static int rp1_pio_gpio_init(struct rp1_pio_client *client, void *param)
++int rp1_pio_gpio_init(struct rp1_pio_client *client, void *param)
+ {
+ struct rp1_gpio_init_args *args = param;
+
+ return rp1_pio_message(client->pio, GPIO_INIT, args, sizeof(*args));
+ }
++EXPORT_SYMBOL_GPL(rp1_pio_gpio_init);
+
+-static int rp1_pio_gpio_set_function(struct rp1_pio_client *client, void *param)
++int rp1_pio_gpio_set_function(struct rp1_pio_client *client, void *param)
+ {
+ struct rp1_gpio_set_function_args *args = param;
+
+ return rp1_pio_message(client->pio, GPIO_SET_FUNCTION, args, sizeof(*args));
+ }
++EXPORT_SYMBOL_GPL(rp1_pio_gpio_set_function);
+
+-static int rp1_pio_gpio_set_pulls(struct rp1_pio_client *client, void *param)
++int rp1_pio_gpio_set_pulls(struct rp1_pio_client *client, void *param)
+ {
+ struct rp1_gpio_set_pulls_args *args = param;
+
+ return rp1_pio_message(client->pio, GPIO_SET_PULLS, args, sizeof(*args));
+ }
++EXPORT_SYMBOL_GPL(rp1_pio_gpio_set_pulls);
+
+-static int rp1_pio_gpio_set_outover(struct rp1_pio_client *client, void *param)
++int rp1_pio_gpio_set_outover(struct rp1_pio_client *client, void *param)
+ {
+ struct rp1_gpio_set_args *args = param;
+
+ return rp1_pio_message(client->pio, GPIO_SET_OUTOVER, args, sizeof(*args));
+ }
++EXPORT_SYMBOL_GPL(rp1_pio_gpio_set_outover);
+
+-static int rp1_pio_gpio_set_inover(struct rp1_pio_client *client, void *param)
++int rp1_pio_gpio_set_inover(struct rp1_pio_client *client, void *param)
+ {
+ struct rp1_gpio_set_args *args = param;
+
+ return rp1_pio_message(client->pio, GPIO_SET_INOVER, args, sizeof(*args));
+ }
++EXPORT_SYMBOL_GPL(rp1_pio_gpio_set_inover);
+
+-static int rp1_pio_gpio_set_oeover(struct rp1_pio_client *client, void *param)
++int rp1_pio_gpio_set_oeover(struct rp1_pio_client *client, void *param)
+ {
+ struct rp1_gpio_set_args *args = param;
+
+ return rp1_pio_message(client->pio, GPIO_SET_OEOVER, args, sizeof(*args));
+ }
++EXPORT_SYMBOL_GPL(rp1_pio_gpio_set_oeover);
+
+-static int rp1_pio_gpio_set_input_enabled(struct rp1_pio_client *client, void *param)
++int rp1_pio_gpio_set_input_enabled(struct rp1_pio_client *client, void *param)
+ {
+ struct rp1_gpio_set_args *args = param;
+
+ return rp1_pio_message(client->pio, GPIO_SET_INPUT_ENABLED, args, sizeof(*args));
+ }
++EXPORT_SYMBOL_GPL(rp1_pio_gpio_set_input_enabled);
+
+-static int rp1_pio_gpio_set_drive_strength(struct rp1_pio_client *client, void *param)
++int rp1_pio_gpio_set_drive_strength(struct rp1_pio_client *client, void *param)
+ {
+ struct rp1_gpio_set_args *args = param;
+
+ return rp1_pio_message(client->pio, GPIO_SET_DRIVE_STRENGTH, args, sizeof(*args));
+ }
++EXPORT_SYMBOL_GPL(rp1_pio_gpio_set_drive_strength);
+
+ static void rp1_pio_sm_dma_callback(void *param)
+ {
+@@ -633,7 +665,7 @@ static int rp1_pio_sm_tx_user(struct rp1
+ struct device *dev = &pdev->dev;
+ int ret = 0;
+
+- // Clean the slate - we're running synchronously
++ /* Clean the slate - we're running synchronously */
+ dma->head_idx = 0;
+ dma->tail_idx = 0;
+
+@@ -686,7 +718,7 @@ static int rp1_pio_sm_tx_user(struct rp1
+ bytes -= copy_bytes;
+ }
+
+- // Block for completion
++ /* Block for completion */
+ while (dma->tail_idx != dma->head_idx) {
+ if (down_timeout(&dma->buf_sem, msecs_to_jiffies(1000))) {
+ dev_err(dev, "DMA wait timed out\n");
+@@ -830,22 +862,22 @@ struct handler_info {
+ HANDLER(WRITE_HW, write_hw),
+ };
+
+-static int rp1_pio_open(struct inode *inode, struct file *filp)
++struct rp1_pio_client *pio_open(void)
+ {
+- struct rp1_pio_device *pio = g_pio;
+ struct rp1_pio_client *client;
+
+ client = kzalloc(sizeof(*client), GFP_KERNEL);
++ if (!client)
++ return ERR_PTR(-ENOMEM);
+
+- client->pio = pio;
+- filp->private_data = client;
++ client->pio = g_pio;
+
+- return 0;
++ return client;
+ }
++EXPORT_SYMBOL_GPL(pio_open);
+
+-static int rp1_pio_release(struct inode *inode, struct file *filp)
++void pio_close(struct rp1_pio_client *client)
+ {
+- struct rp1_pio_client *client = filp->private_data;
+ struct rp1_pio_device *pio = client->pio;
+ uint claimed_dmas = client->claimed_dmas;
+ int i;
+@@ -885,6 +917,45 @@ static int rp1_pio_release(struct inode
+ /* Reinitialise the SM? */
+
+ kfree(client);
++}
++EXPORT_SYMBOL_GPL(pio_close);
++
++void pio_set_error(struct rp1_pio_client *client, int err)
++{
++ client->error = err;
++}
++EXPORT_SYMBOL_GPL(pio_set_error);
++
++int pio_get_error(const struct rp1_pio_client *client)
++{
++ return client->error;
++}
++EXPORT_SYMBOL_GPL(pio_get_error);
++
++void pio_clear_error(struct rp1_pio_client *client)
++{
++ client->error = 0;
++}
++EXPORT_SYMBOL_GPL(pio_clear_error);
++
++static int rp1_pio_open(struct inode *inode, struct file *filp)
++{
++ struct rp1_pio_client *client;
++
++ client = pio_open();
++ if (IS_ERR(client))
++ return PTR_ERR(client);
++
++ filp->private_data = client;
++
++ return 0;
++}
++
++static int rp1_pio_release(struct inode *inode, struct file *filp)
++{
++ struct rp1_pio_client *client = filp->private_data;
++
++ pio_close(client);
+
+ return 0;
+ }
+--- /dev/null
++++ b/include/linux/pio_instructions.h
+@@ -0,0 +1,481 @@
++/* SPDX-License-Identifier: BSD-3-Clause */
++/*
++ * Copyright (c) 2020 Raspberry Pi (Trading) Ltd.
++ */
++
++#ifndef _HARDWARE_PIO_INSTRUCTIONS_H
++#define _HARDWARE_PIO_INSTRUCTIONS_H
++
++/** \brief PIO instruction encoding
++ * \defgroup pio_instructions pio_instructions
++ * \ingroup hardware_pio
++ *
++ * Functions for generating PIO instruction encodings programmatically. In debug builds
++ *`PARAM_ASSERTIONS_ENABLED_PIO_INSTRUCTIONS` can be set to 1 to enable validation of encoding function
++ * parameters.
++ *
++ * For fuller descriptions of the instructions in question see the "RP2040 Datasheet"
++ */
++
++// PICO_CONFIG: PARAM_ASSERTIONS_ENABLED_PIO_INSTRUCTIONS, Enable/disable assertions in the PIO instructions, type=bool, default=0, group=pio_instructions
++#ifndef PARAM_ASSERTIONS_ENABLED_PIO_INSTRUCTIONS
++#define PARAM_ASSERTIONS_ENABLED_PIO_INSTRUCTIONS 0
++#endif
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++enum pio_instr_bits {
++ pio_instr_bits_jmp = 0x0000,
++ pio_instr_bits_wait = 0x2000,
++ pio_instr_bits_in = 0x4000,
++ pio_instr_bits_out = 0x6000,
++ pio_instr_bits_push = 0x8000,
++ pio_instr_bits_pull = 0x8080,
++ pio_instr_bits_mov = 0xa000,
++ pio_instr_bits_irq = 0xc000,
++ pio_instr_bits_set = 0xe000,
++};
++
++#ifndef NDEBUG
++#define _PIO_INVALID_IN_SRC 0x08u
++#define _PIO_INVALID_OUT_DEST 0x10u
++#define _PIO_INVALID_SET_DEST 0x20u
++#define _PIO_INVALID_MOV_SRC 0x40u
++#define _PIO_INVALID_MOV_DEST 0x80u
++#else
++#define _PIO_INVALID_IN_SRC 0u
++#define _PIO_INVALID_OUT_DEST 0u
++#define _PIO_INVALID_SET_DEST 0u
++#define _PIO_INVALID_MOV_SRC 0u
++#define _PIO_INVALID_MOV_DEST 0u
++#endif
++
++/*! \brief Enumeration of values to pass for source/destination args for instruction encoding functions
++ * \ingroup pio_instructions
++ *
++ * \note Not all values are suitable for all functions. Validity is only checked in debug mode when
++ * `PARAM_ASSERTIONS_ENABLED_PIO_INSTRUCTIONS` is 1
++ */
++enum pio_src_dest {
++ pio_pins = 0u,
++ pio_x = 1u,
++ pio_y = 2u,
++ pio_null = 3u | _PIO_INVALID_SET_DEST | _PIO_INVALID_MOV_DEST,
++ pio_pindirs = 4u | _PIO_INVALID_IN_SRC | _PIO_INVALID_MOV_SRC | _PIO_INVALID_MOV_DEST,
++ pio_exec_mov = 4u | _PIO_INVALID_IN_SRC | _PIO_INVALID_OUT_DEST | _PIO_INVALID_SET_DEST | _PIO_INVALID_MOV_SRC,
++ pio_status = 5u | _PIO_INVALID_IN_SRC | _PIO_INVALID_OUT_DEST | _PIO_INVALID_SET_DEST | _PIO_INVALID_MOV_DEST,
++ pio_pc = 5u | _PIO_INVALID_IN_SRC | _PIO_INVALID_SET_DEST | _PIO_INVALID_MOV_SRC,
++ pio_isr = 6u | _PIO_INVALID_SET_DEST,
++ pio_osr = 7u | _PIO_INVALID_OUT_DEST | _PIO_INVALID_SET_DEST,
++ pio_exec_out = 7u | _PIO_INVALID_IN_SRC | _PIO_INVALID_SET_DEST | _PIO_INVALID_MOV_SRC | _PIO_INVALID_MOV_DEST,
++};
++
++static inline uint _pio_major_instr_bits(uint instr) {
++ return instr & 0xe000u;
++}
++
++static inline uint _pio_encode_instr_and_args(enum pio_instr_bits instr_bits, uint arg1, uint arg2) {
++ valid_params_if(PIO_INSTRUCTIONS, arg1 <= 0x7);
++#if PARAM_ASSERTIONS_ENABLED(PIO_INSTRUCTIONS)
++ uint32_t major = _pio_major_instr_bits(instr_bits);
++ if (major == pio_instr_bits_in || major == pio_instr_bits_out) {
++ assert(arg2 && arg2 <= 32);
++ } else {
++ assert(arg2 <= 31);
++ }
++#endif
++ return instr_bits | (arg1 << 5u) | (arg2 & 0x1fu);
++}
++
++static inline uint _pio_encode_instr_and_src_dest(enum pio_instr_bits instr_bits, enum pio_src_dest dest, uint value) {
++ return _pio_encode_instr_and_args(instr_bits, dest & 7u, value);
++}
++
++/*! \brief Encode just the delay slot bits of an instruction
++ * \ingroup pio_instructions
++ *
++ * \note This function does not return a valid instruction encoding; instead it returns an encoding of the delay
++ * slot suitable for `OR`ing with the result of an encoding function for an actual instruction. Care should be taken when
++ * combining the results of this function with the results of \ref pio_encode_sideset and \ref pio_encode_sideset_opt
++ * as they share the same bits within the instruction encoding.
++ *
++ * \param cycles the number of cycles 0-31 (or less if side set is being used)
++ * \return the delay slot bits to be ORed with an instruction encoding
++ */
++static inline uint pio_encode_delay(uint cycles) {
++ // note that the maximum cycles will be smaller if sideset_bit_count > 0
++ valid_params_if(PIO_INSTRUCTIONS, cycles <= 0x1f);
++ return cycles << 8u;
++}
++
++/*! \brief Encode just the side set bits of an instruction (in non optional side set mode)
++ * \ingroup pio_instructions
++ *
++ * \note This function does not return a valid instruction encoding; instead it returns an encoding of the side set bits
++ * suitable for `OR`ing with the result of an encoding function for an actual instruction. Care should be taken when
++ * combining the results of this function with the results of \ref pio_encode_delay as they share the same bits
++ * within the instruction encoding.
++ *
++ * \param sideset_bit_count number of side set bits as would be specified via `.sideset` in pioasm
++ * \param value the value to sideset on the pins
++ * \return the side set bits to be ORed with an instruction encoding
++ */
++static inline uint pio_encode_sideset(uint sideset_bit_count, uint value) {
++ valid_params_if(PIO_INSTRUCTIONS, sideset_bit_count >= 1 && sideset_bit_count <= 5);
++ valid_params_if(PIO_INSTRUCTIONS, value <= ((1u << sideset_bit_count) - 1));
++ return value << (13u - sideset_bit_count);
++}
++
++/*! \brief Encode just the side set bits of an instruction (in optional -`opt` side set mode)
++ * \ingroup pio_instructions
++ *
++ * \note This function does not return a valid instruction encoding; instead it returns an encoding of the side set bits
++ * suitable for `OR`ing with the result of an encoding function for an actual instruction. Care should be taken when
++ * combining the results of this function with the results of \ref pio_encode_delay as they share the same bits
++ * within the instruction encoding.
++ *
++ * \param sideset_bit_count number of side set bits as would be specified via `.sideset <n> opt` in pioasm
++ * \param value the value to sideset on the pins
++ * \return the side set bits to be ORed with an instruction encoding
++ */
++static inline uint pio_encode_sideset_opt(uint sideset_bit_count, uint value) {
++ valid_params_if(PIO_INSTRUCTIONS, sideset_bit_count >= 1 && sideset_bit_count <= 4);
++ valid_params_if(PIO_INSTRUCTIONS, value <= ((1u << sideset_bit_count) - 1));
++ return 0x1000u | value << (12u - sideset_bit_count);
++}
++
++/*! \brief Encode an unconditional JMP instruction
++ * \ingroup pio_instructions
++ *
++ * This is the equivalent of `JMP <addr>`
++ *
++ * \param addr The target address 0-31 (an absolute address within the PIO instruction memory)
++ * \return The instruction encoding with 0 delay and no side set value
++ * \see pio_encode_delay, pio_encode_sideset, pio_encode_sideset_opt
++ */
++static inline uint pio_encode_jmp(uint addr) {
++ return _pio_encode_instr_and_args(pio_instr_bits_jmp, 0, addr);
++}
++
++/*! \brief Encode a conditional JMP if scratch X zero instruction
++ * \ingroup pio_instructions
++ *
++ * This is the equivalent of `JMP !X <addr>`
++ *
++ * \param addr The target address 0-31 (an absolute address within the PIO instruction memory)
++ * \return The instruction encoding with 0 delay and no side set value
++ * \see pio_encode_delay, pio_encode_sideset, pio_encode_sideset_opt
++ */
++static inline uint pio_encode_jmp_not_x(uint addr) {
++ return _pio_encode_instr_and_args(pio_instr_bits_jmp, 1, addr);
++}
++
++/*! \brief Encode a conditional JMP if scratch X non-zero (and post-decrement X) instruction
++ * \ingroup pio_instructions
++ *
++ * This is the equivalent of `JMP X-- <addr>`
++ *
++ * \param addr The target address 0-31 (an absolute address within the PIO instruction memory)
++ * \return The instruction encoding with 0 delay and no side set value
++ * \see pio_encode_delay, pio_encode_sideset, pio_encode_sideset_opt
++ */
++static inline uint pio_encode_jmp_x_dec(uint addr) {
++ return _pio_encode_instr_and_args(pio_instr_bits_jmp, 2, addr);
++}
++
++/*! \brief Encode a conditional JMP if scratch Y zero instruction
++ * \ingroup pio_instructions
++ *
++ * This is the equivalent of `JMP !Y <addr>`
++ *
++ * \param addr The target address 0-31 (an absolute address within the PIO instruction memory)
++ * \return The instruction encoding with 0 delay and no side set value
++ * \see pio_encode_delay, pio_encode_sideset, pio_encode_sideset_opt
++ */
++static inline uint pio_encode_jmp_not_y(uint addr) {
++ return _pio_encode_instr_and_args(pio_instr_bits_jmp, 3, addr);
++}
++
++/*! \brief Encode a conditional JMP if scratch Y non-zero (and post-decrement Y) instruction
++ * \ingroup pio_instructions
++ *
++ * This is the equivalent of `JMP Y-- <addr>`
++ *
++ * \param addr The target address 0-31 (an absolute address within the PIO instruction memory)
++ * \return The instruction encoding with 0 delay and no side set value
++ * \see pio_encode_delay, pio_encode_sideset, pio_encode_sideset_opt
++ */
++static inline uint pio_encode_jmp_y_dec(uint addr) {
++ return _pio_encode_instr_and_args(pio_instr_bits_jmp, 4, addr);
++}
++
++/*! \brief Encode a conditional JMP if scratch X not equal scratch Y instruction
++ * \ingroup pio_instructions
++ *
++ * This is the equivalent of `JMP X!=Y <addr>`
++ *
++ * \param addr The target address 0-31 (an absolute address within the PIO instruction memory)
++ * \return The instruction encoding with 0 delay and no side set value
++ * \see pio_encode_delay, pio_encode_sideset, pio_encode_sideset_opt
++ */
++static inline uint pio_encode_jmp_x_ne_y(uint addr) {
++ return _pio_encode_instr_and_args(pio_instr_bits_jmp, 5, addr);
++}
++
++/*! \brief Encode a conditional JMP if input pin high instruction
++ * \ingroup pio_instructions
++ *
++ * This is the equivalent of `JMP PIN <addr>`
++ *
++ * \param addr The target address 0-31 (an absolute address within the PIO instruction memory)
++ * \return The instruction encoding with 0 delay and no side set value
++ * \see pio_encode_delay, pio_encode_sideset, pio_encode_sideset_opt
++ */
++static inline uint pio_encode_jmp_pin(uint addr) {
++ return _pio_encode_instr_and_args(pio_instr_bits_jmp, 6, addr);
++}
++
++/*! \brief Encode a conditional JMP if output shift register not empty instruction
++ * \ingroup pio_instructions
++ *
++ * This is the equivalent of `JMP !OSRE <addr>`
++ *
++ * \param addr The target address 0-31 (an absolute address within the PIO instruction memory)
++ * \return The instruction encoding with 0 delay and no side set value
++ * \see pio_encode_delay, pio_encode_sideset, pio_encode_sideset_opt
++ */
++static inline uint pio_encode_jmp_not_osre(uint addr) {
++ return _pio_encode_instr_and_args(pio_instr_bits_jmp, 7, addr);
++}
++
++static inline uint _pio_encode_irq(bool relative, uint irq) {
++ valid_params_if(PIO_INSTRUCTIONS, irq <= 7);
++ return (relative ? 0x10u : 0x0u) | irq;
++}
++
++/*! \brief Encode a WAIT for GPIO pin instruction
++ * \ingroup pio_instructions
++ *
++ * This is the equivalent of `WAIT <polarity> GPIO <gpio>`
++ *
++ * \param polarity true for `WAIT 1`, false for `WAIT 0`
++ * \param gpio The real GPIO number 0-31
++ * \return The instruction encoding with 0 delay and no side set value
++ * \see pio_encode_delay, pio_encode_sideset, pio_encode_sideset_opt
++ */
++static inline uint pio_encode_wait_gpio(bool polarity, uint gpio) {
++ return _pio_encode_instr_and_args(pio_instr_bits_wait, 0u | (polarity ? 4u : 0u), gpio);
++}
++
++/*! \brief Encode a WAIT for pin instruction
++ * \ingroup pio_instructions
++ *
++ * This is the equivalent of `WAIT <polarity> PIN <pin>`
++ *
++ * \param polarity true for `WAIT 1`, false for `WAIT 0`
++ * \param pin The pin number 0-31 relative to the executing SM's input pin mapping
++ * \return The instruction encoding with 0 delay and no side set value
++ * \see pio_encode_delay, pio_encode_sideset, pio_encode_sideset_opt
++ */
++static inline uint pio_encode_wait_pin(bool polarity, uint pin) {
++ return _pio_encode_instr_and_args(pio_instr_bits_wait, 1u | (polarity ? 4u : 0u), pin);
++}
++
++/*! \brief Encode a WAIT for IRQ instruction
++ * \ingroup pio_instructions
++ *
++ * This is the equivalent of `WAIT <polarity> IRQ <irq> <relative>`
++ *
++ * \param polarity true for `WAIT 1`, false for `WAIT 0`
++ * \param relative true for a `WAIT IRQ <irq> REL`, false for regular `WAIT IRQ <irq>`
++ * \param irq the irq number 0-7
++ * \return The instruction encoding with 0 delay and no side set value
++ * \see pio_encode_delay, pio_encode_sideset, pio_encode_sideset_opt
++ */
++static inline uint pio_encode_wait_irq(bool polarity, bool relative, uint irq) {
++ valid_params_if(PIO_INSTRUCTIONS, irq <= 7);
++ return _pio_encode_instr_and_args(pio_instr_bits_wait, 2u | (polarity ? 4u : 0u), _pio_encode_irq(relative, irq));
++}
++
++/*! \brief Encode an IN instruction
++ * \ingroup pio_instructions
++ *
++ * This is the equivalent of `IN <src>, <count>`
++ *
++ * \param src The source to take data from
++ * \param count The number of bits 1-32
++ * \return The instruction encoding with 0 delay and no side set value
++ * \see pio_encode_delay, pio_encode_sideset, pio_encode_sideset_opt
++ */
++static inline uint pio_encode_in(enum pio_src_dest src, uint count) {
++ valid_params_if(PIO_INSTRUCTIONS, !(src & _PIO_INVALID_IN_SRC));
++ return _pio_encode_instr_and_src_dest(pio_instr_bits_in, src, count);
++}
++
++/*! \brief Encode an OUT instruction
++ * \ingroup pio_instructions
++ *
++ * This is the equivalent of `OUT <src>, <count>`
++ *
++ * \param dest The destination to write data to
++ * \param count The number of bits 1-32
++ * \return The instruction encoding with 0 delay and no side set value
++ * \see pio_encode_delay, pio_encode_sideset, pio_encode_sideset_opt
++ */
++static inline uint pio_encode_out(enum pio_src_dest dest, uint count) {
++ valid_params_if(PIO_INSTRUCTIONS, !(dest & _PIO_INVALID_OUT_DEST));
++ return _pio_encode_instr_and_src_dest(pio_instr_bits_out, dest, count);
++}
++
++/*! \brief Encode a PUSH instruction
++ * \ingroup pio_instructions
++ *
++ * This is the equivalent of `PUSH <if_full>, <block>`
++ *
++ * \param if_full true for `PUSH IF_FULL ...`, false for `PUSH ...`
++ * \param block true for `PUSH ... BLOCK`, false for `PUSH ...`
++ * \return The instruction encoding with 0 delay and no side set value
++ * \see pio_encode_delay, pio_encode_sideset, pio_encode_sideset_opt
++ */
++static inline uint pio_encode_push(bool if_full, bool block) {
++ return _pio_encode_instr_and_args(pio_instr_bits_push, (if_full ? 2u : 0u) | (block ? 1u : 0u), 0);
++}
++
++/*! \brief Encode a PULL instruction
++ * \ingroup pio_instructions
++ *
++ * This is the equivalent of `PULL <if_empty>, <block>`
++ *
++ * \param if_empty true for `PULL IF_EMPTY ...`, false for `PULL ...`
++ * \param block true for `PULL ... BLOCK`, false for `PULL ...`
++ * \return The instruction encoding with 0 delay and no side set value
++ * \see pio_encode_delay, pio_encode_sideset, pio_encode_sideset_opt
++ */
++static inline uint pio_encode_pull(bool if_empty, bool block) {
++ return _pio_encode_instr_and_args(pio_instr_bits_pull, (if_empty ? 2u : 0u) | (block ? 1u : 0u), 0);
++}
++
++/*! \brief Encode a MOV instruction
++ * \ingroup pio_instructions
++ *
++ * This is the equivalent of `MOV <dest>, <src>`
++ *
++ * \param dest The destination to write data to
++ * \param src The source to take data from
++ * \return The instruction encoding with 0 delay and no side set value
++ * \see pio_encode_delay, pio_encode_sideset, pio_encode_sideset_opt
++ */
++static inline uint pio_encode_mov(enum pio_src_dest dest, enum pio_src_dest src) {
++ valid_params_if(PIO_INSTRUCTIONS, !(dest & _PIO_INVALID_MOV_DEST));
++ valid_params_if(PIO_INSTRUCTIONS, !(src & _PIO_INVALID_MOV_SRC));
++ return _pio_encode_instr_and_src_dest(pio_instr_bits_mov, dest, src & 7u);
++}
++
++/*! \brief Encode a MOV instruction with bit invert
++ * \ingroup pio_instructions
++ *
++ * This is the equivalent of `MOV <dest>, ~<src>`
++ *
++ * \param dest The destination to write inverted data to
++ * \param src The source to take data from
++ * \return The instruction encoding with 0 delay and no side set value
++ * \see pio_encode_delay, pio_encode_sideset, pio_encode_sideset_opt
++ */
++static inline uint pio_encode_mov_not(enum pio_src_dest dest, enum pio_src_dest src) {
++ valid_params_if(PIO_INSTRUCTIONS, !(dest & _PIO_INVALID_MOV_DEST));
++ valid_params_if(PIO_INSTRUCTIONS, !(src & _PIO_INVALID_MOV_SRC));
++ return _pio_encode_instr_and_src_dest(pio_instr_bits_mov, dest, (1u << 3u) | (src & 7u));
++}
++
++/*! \brief Encode a MOV instruction with bit reverse
++ * \ingroup pio_instructions
++ *
++ * This is the equivalent of `MOV <dest>, ::<src>`
++ *
++ * \param dest The destination to write bit reversed data to
++ * \param src The source to take data from
++ * \return The instruction encoding with 0 delay and no side set value
++ * \see pio_encode_delay, pio_encode_sideset, pio_encode_sideset_opt
++ */
++static inline uint pio_encode_mov_reverse(enum pio_src_dest dest, enum pio_src_dest src) {
++ valid_params_if(PIO_INSTRUCTIONS, !(dest & _PIO_INVALID_MOV_DEST));
++ valid_params_if(PIO_INSTRUCTIONS, !(src & _PIO_INVALID_MOV_SRC));
++ return _pio_encode_instr_and_src_dest(pio_instr_bits_mov, dest, (2u << 3u) | (src & 7u));
++}
++
++/*! \brief Encode a IRQ SET instruction
++ * \ingroup pio_instructions
++ *
++ * This is the equivalent of `IRQ SET <irq> <relative>`
++ *
++ * \param relative true for a `IRQ SET <irq> REL`, false for regular `IRQ SET <irq>`
++ * \param irq the irq number 0-7
++ * \return The instruction encoding with 0 delay and no side set value
++ * \see pio_encode_delay, pio_encode_sideset, pio_encode_sideset_opt
++ */
++static inline uint pio_encode_irq_set(bool relative, uint irq) {
++ return _pio_encode_instr_and_args(pio_instr_bits_irq, 0, _pio_encode_irq(relative, irq));
++}
++
++/*! \brief Encode a IRQ WAIT instruction
++ * \ingroup pio_instructions
++ *
++ * This is the equivalent of `IRQ WAIT <irq> <relative>`
++ *
++ * \param relative true for a `IRQ WAIT <irq> REL`, false for regular `IRQ WAIT <irq>`
++ * \param irq the irq number 0-7
++ * \return The instruction encoding with 0 delay and no side set value
++ * \see pio_encode_delay, pio_encode_sideset, pio_encode_sideset_opt
++ */
++static inline uint pio_encode_irq_wait(bool relative, uint irq) {
++ return _pio_encode_instr_and_args(pio_instr_bits_irq, 1, _pio_encode_irq(relative, irq));
++}
++
++/*! \brief Encode a IRQ CLEAR instruction
++ * \ingroup pio_instructions
++ *
++ * This is the equivalent of `IRQ CLEAR <irq> <relative>`
++ *
++ * \param relative true for a `IRQ CLEAR <irq> REL`, false for regular `IRQ CLEAR <irq>`
++ * \param irq the irq number 0-7
++ * \return The instruction encoding with 0 delay and no side set value
++ * \see pio_encode_delay, pio_encode_sideset, pio_encode_sideset_opt
++ */
++static inline uint pio_encode_irq_clear(bool relative, uint irq) {
++ return _pio_encode_instr_and_args(pio_instr_bits_irq, 2, _pio_encode_irq(relative, irq));
++}
++
++/*! \brief Encode a SET instruction
++ * \ingroup pio_instructions
++ *
++ * This is the equivalent of `SET <dest>, <value>`
++ *
++ * \param dest The destination to apply the value to
++ * \param value The value 0-31
++ * \return The instruction encoding with 0 delay and no side set value
++ * \see pio_encode_delay, pio_encode_sideset, pio_encode_sideset_opt
++ */
++static inline uint pio_encode_set(enum pio_src_dest dest, uint value) {
++ valid_params_if(PIO_INSTRUCTIONS, !(dest & _PIO_INVALID_SET_DEST));
++ return _pio_encode_instr_and_src_dest(pio_instr_bits_set, dest, value);
++}
++
++/*! \brief Encode a NOP instruction
++ * \ingroup pio_instructions
++ *
++ * This is the equivalent of `NOP` which is itself encoded as `MOV y, y`
++ *
++ * \return The instruction encoding with 0 delay and no side set value
++ * \see pio_encode_delay, pio_encode_sideset, pio_encode_sideset_opt
++ */
++static inline uint pio_encode_nop(void) {
++ return pio_encode_mov(pio_y, pio_y);
++}
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif
+--- /dev/null
++++ b/include/linux/pio_rp1.h
+@@ -0,0 +1,873 @@
++/* SPDX-License-Identifier: GPL-2.0 */
++/*
++ * Copyright (c) 2024 Raspberry Pi Ltd.
++ * All rights reserved.
++ */
++
++#ifndef _PIO_RP1_H
++#define _PIO_RP1_H
++
++#include <uapi/misc/rp1_pio_if.h>
++
++#define PARAM_WARNINGS_ENABLED 1
++
++#ifdef DEBUG
++#define PARAM_WARNINGS_ENABLED 1
++#endif
++
++#ifndef PARAM_WARNINGS_ENABLED
++#define PARAM_WARNINGS_ENABLED 0
++#endif
++
++#define bad_params_if(client, test) \
++ ({ bool f = (test); if (f) pio_set_error(client, -EINVAL); \
++ if (f && PARAM_WARNINGS_ENABLED) WARN_ON((test)); \
++ f; })
++
++#ifndef PARAM_ASSERTIONS_ENABLE_ALL
++#define PARAM_ASSERTIONS_ENABLE_ALL 0
++#endif
++
++#ifndef PARAM_ASSERTIONS_DISABLE_ALL
++#define PARAM_ASSERTIONS_DISABLE_ALL 0
++#endif
++
++#define PARAM_ASSERTIONS_ENABLED(x) \
++ ((PARAM_ASSERTIONS_ENABLED_ ## x || PARAM_ASSERTIONS_ENABLE_ALL) && \
++ !PARAM_ASSERTIONS_DISABLE_ALL)
++#define valid_params_if(x, test) ({if (PARAM_ASSERTIONS_ENABLED(x)) WARN_ON(test); })
++
++#include <linux/pio_instructions.h>
++
++#define NUM_PIO_STATE_MACHINES 4
++#define PIO_INSTRUCTION_COUNT 32
++#define PIO_ORIGIN_ANY ((uint)(~0))
++#define GPIOS_MASK ((1 << RP1_PIO_GPIO_COUNT) - 1)
++
++#define PICO_NO_HARDWARE 0
++
++#define pio0 pio_open_helper(0)
++
++#define PROC_PIO_SM0_PINCTRL_OUT_BASE_BITS 0x0000001f
++#define PROC_PIO_SM0_PINCTRL_OUT_BASE_LSB 0
++#define PROC_PIO_SM0_PINCTRL_OUT_COUNT_BITS 0x03f00000
++#define PROC_PIO_SM0_PINCTRL_OUT_COUNT_LSB 20
++#define PROC_PIO_SM0_PINCTRL_SET_BASE_BITS 0x000003e0
++#define PROC_PIO_SM0_PINCTRL_SET_BASE_LSB 5
++#define PROC_PIO_SM0_PINCTRL_SET_COUNT_BITS 0x1c000000
++#define PROC_PIO_SM0_PINCTRL_SET_COUNT_LSB 26
++#define PROC_PIO_SM0_PINCTRL_IN_BASE_BITS 0x000f8000
++#define PROC_PIO_SM0_PINCTRL_IN_BASE_LSB 15
++#define PROC_PIO_SM0_PINCTRL_SIDESET_BASE_BITS 0x00007c00
++#define PROC_PIO_SM0_PINCTRL_SIDESET_BASE_LSB 10
++#define PROC_PIO_SM0_PINCTRL_SIDESET_COUNT_BITS 0xe0000000
++#define PROC_PIO_SM0_PINCTRL_SIDESET_COUNT_LSB 29
++#define PROC_PIO_SM0_EXECCTRL_SIDE_EN_BITS 0x40000000
++#define PROC_PIO_SM0_EXECCTRL_SIDE_EN_LSB 30
++#define PROC_PIO_SM0_EXECCTRL_SIDE_PINDIR_BITS 0x20000000
++#define PROC_PIO_SM0_EXECCTRL_SIDE_PINDIR_LSB 29
++#define PROC_PIO_SM0_CLKDIV_INT_LSB 16
++#define PROC_PIO_SM0_CLKDIV_FRAC_LSB 8
++#define PROC_PIO_SM0_EXECCTRL_WRAP_TOP_BITS 0x0001f000
++#define PROC_PIO_SM0_EXECCTRL_WRAP_TOP_LSB 12
++#define PROC_PIO_SM0_EXECCTRL_WRAP_BOTTOM_BITS 0x00000f80
++#define PROC_PIO_SM0_EXECCTRL_WRAP_BOTTOM_LSB 7
++#define PROC_PIO_SM0_EXECCTRL_JMP_PIN_BITS 0x1f000000
++#define PROC_PIO_SM0_EXECCTRL_JMP_PIN_LSB 24
++#define PROC_PIO_SM0_SHIFTCTRL_IN_SHIFTDIR_BITS 0x00040000
++#define PROC_PIO_SM0_SHIFTCTRL_IN_SHIFTDIR_LSB 18
++#define PROC_PIO_SM0_SHIFTCTRL_AUTOPULL_BITS 0x00020000
++#define PROC_PIO_SM0_SHIFTCTRL_AUTOPULL_LSB 17
++#define PROC_PIO_SM0_SHIFTCTRL_AUTOPUSH_BITS 0x00010000
++#define PROC_PIO_SM0_SHIFTCTRL_AUTOPUSH_LSB 16
++#define PROC_PIO_SM0_SHIFTCTRL_PUSH_THRESH_BITS 0x01f00000
++#define PROC_PIO_SM0_SHIFTCTRL_PUSH_THRESH_LSB 20
++#define PROC_PIO_SM0_SHIFTCTRL_OUT_SHIFTDIR_BITS 0x00080000
++#define PROC_PIO_SM0_SHIFTCTRL_OUT_SHIFTDIR_LSB 19
++#define PROC_PIO_SM0_SHIFTCTRL_PULL_THRESH_BITS 0x3e000000
++#define PROC_PIO_SM0_SHIFTCTRL_PULL_THRESH_LSB 25
++#define PROC_PIO_SM0_SHIFTCTRL_FJOIN_TX_BITS 0x40000000
++#define PROC_PIO_SM0_SHIFTCTRL_FJOIN_TX_LSB 30
++#define PROC_PIO_SM0_SHIFTCTRL_FJOIN_RX_BITS 0x80000000
++#define PROC_PIO_SM0_SHIFTCTRL_FJOIN_RX_LSB 31
++#define PROC_PIO_SM0_EXECCTRL_OUT_STICKY_BITS 0x00020000
++#define PROC_PIO_SM0_EXECCTRL_OUT_STICKY_LSB 17
++#define PROC_PIO_SM0_EXECCTRL_INLINE_OUT_EN_BITS 0x00040000
++#define PROC_PIO_SM0_EXECCTRL_INLINE_OUT_EN_LSB 18
++#define PROC_PIO_SM0_EXECCTRL_OUT_EN_SEL_BITS 0x00f80000
++#define PROC_PIO_SM0_EXECCTRL_OUT_EN_SEL_LSB 19
++#define PROC_PIO_SM0_EXECCTRL_STATUS_SEL_BITS 0x00000020
++#define PROC_PIO_SM0_EXECCTRL_STATUS_SEL_LSB 5
++#define PROC_PIO_SM0_EXECCTRL_STATUS_N_BITS 0x0000001f
++#define PROC_PIO_SM0_EXECCTRL_STATUS_N_LSB 0
++
++enum pio_fifo_join {
++ PIO_FIFO_JOIN_NONE = 0,
++ PIO_FIFO_JOIN_TX = 1,
++ PIO_FIFO_JOIN_RX = 2,
++};
++
++enum pio_mov_status_type {
++ STATUS_TX_LESSTHAN = 0,
++ STATUS_RX_LESSTHAN = 1
++};
++
++enum pio_xfer_dir {
++ PIO_DIR_TO_SM,
++ PIO_DIR_FROM_SM,
++ PIO_DIR_COUNT
++};
++
++enum clock_index {
++ clk_sys = 5
++};
++
++typedef struct pio_program {
++ const uint16_t *instructions;
++ uint8_t length;
++ int8_t origin; // required instruction memory origin or -1
++} pio_program_t;
++
++enum gpio_function {
++ GPIO_FUNC_FSEL0 = 0,
++ GPIO_FUNC_FSEL1 = 1,
++ GPIO_FUNC_FSEL2 = 2,
++ GPIO_FUNC_FSEL3 = 3,
++ GPIO_FUNC_FSEL4 = 4,
++ GPIO_FUNC_FSEL5 = 5,
++ GPIO_FUNC_FSEL6 = 6,
++ GPIO_FUNC_FSEL7 = 7,
++ GPIO_FUNC_FSEL8 = 8,
++ GPIO_FUNC_NULL = 0x1f,
++
++ // Name a few
++ GPIO_FUNC_SYS_RIO = 5,
++ GPIO_FUNC_PROC_RIO = 6,
++ GPIO_FUNC_PIO = 7,
++};
++
++enum gpio_irq_level {
++ GPIO_IRQ_LEVEL_LOW = 0x1u,
++ GPIO_IRQ_LEVEL_HIGH = 0x2u,
++ GPIO_IRQ_EDGE_FALL = 0x4u,
++ GPIO_IRQ_EDGE_RISE = 0x8u,
++};
++
++enum gpio_override {
++ GPIO_OVERRIDE_NORMAL = 0,
++ GPIO_OVERRIDE_INVERT = 1,
++ GPIO_OVERRIDE_LOW = 2,
++ GPIO_OVERRIDE_HIGH = 3,
++};
++enum gpio_slew_rate {
++ GPIO_SLEW_RATE_SLOW = 0,
++ GPIO_SLEW_RATE_FAST = 1
++};
++
++enum gpio_drive_strength {
++ GPIO_DRIVE_STRENGTH_2MA = 0,
++ GPIO_DRIVE_STRENGTH_4MA = 1,
++ GPIO_DRIVE_STRENGTH_8MA = 2,
++ GPIO_DRIVE_STRENGTH_12MA = 3
++};
++
++typedef rp1_pio_sm_config pio_sm_config;
++
++typedef struct rp1_pio_client *PIO;
++
++void pio_set_error(struct rp1_pio_client *client, int err);
++int pio_get_error(struct rp1_pio_client *client);
++void pio_clear_error(struct rp1_pio_client *client);
++
++int rp1_pio_can_add_program(struct rp1_pio_client *client, void *param);
++int rp1_pio_add_program(struct rp1_pio_client *client, void *param);
++int rp1_pio_remove_program(struct rp1_pio_client *client, void *param);
++int rp1_pio_clear_instr_mem(struct rp1_pio_client *client, void *param);
++int rp1_pio_sm_claim(struct rp1_pio_client *client, void *param);
++int rp1_pio_sm_unclaim(struct rp1_pio_client *client, void *param);
++int rp1_pio_sm_is_claimed(struct rp1_pio_client *client, void *param);
++int rp1_pio_sm_init(struct rp1_pio_client *client, void *param);
++int rp1_pio_sm_set_config(struct rp1_pio_client *client, void *param);
++int rp1_pio_sm_exec(struct rp1_pio_client *client, void *param);
++int rp1_pio_sm_clear_fifos(struct rp1_pio_client *client, void *param);
++int rp1_pio_sm_set_clkdiv(struct rp1_pio_client *client, void *param);
++int rp1_pio_sm_set_pins(struct rp1_pio_client *client, void *param);
++int rp1_pio_sm_set_pindirs(struct rp1_pio_client *client, void *param);
++int rp1_pio_sm_set_enabled(struct rp1_pio_client *client, void *param);
++int rp1_pio_sm_restart(struct rp1_pio_client *client, void *param);
++int rp1_pio_sm_clkdiv_restart(struct rp1_pio_client *client, void *param);
++int rp1_pio_sm_enable_sync(struct rp1_pio_client *client, void *param);
++int rp1_pio_sm_put(struct rp1_pio_client *client, void *param);
++int rp1_pio_sm_get(struct rp1_pio_client *client, void *param);
++int rp1_pio_sm_set_dmactrl(struct rp1_pio_client *client, void *param);
++int rp1_pio_gpio_init(struct rp1_pio_client *client, void *param);
++int rp1_pio_gpio_set_function(struct rp1_pio_client *client, void *param);
++int rp1_pio_gpio_set_pulls(struct rp1_pio_client *client, void *param);
++int rp1_pio_gpio_set_outover(struct rp1_pio_client *client, void *param);
++int rp1_pio_gpio_set_inover(struct rp1_pio_client *client, void *param);
++int rp1_pio_gpio_set_oeover(struct rp1_pio_client *client, void *param);
++int rp1_pio_gpio_set_input_enabled(struct rp1_pio_client *client, void *param);
++int rp1_pio_gpio_set_drive_strength(struct rp1_pio_client *client, void *param);
++
++int pio_init(void);
++PIO pio_open(void);
++void pio_close(PIO pio);
++
++int pio_sm_config_xfer(PIO pio, uint sm, uint dir, uint buf_size, uint buf_count);
++int pio_sm_xfer_data(PIO pio, uint sm, uint dir, uint data_bytes, void *data);
++
++static inline bool pio_can_add_program(struct rp1_pio_client *client,
++ const pio_program_t *program)
++{
++ struct rp1_pio_add_program_args args;
++
++ if (bad_params_if(client, program->length > PIO_INSTRUCTION_COUNT))
++ return false;
++ args.origin = (program->origin == -1) ? PIO_ORIGIN_ANY : program->origin;
++ args.num_instrs = program->length;
++
++ memcpy(args.instrs, program->instructions, args.num_instrs * sizeof(args.instrs[0]));
++ return rp1_pio_can_add_program(client, &args);
++}
++
++static inline bool pio_can_add_program_at_offset(struct rp1_pio_client *client,
++ const pio_program_t *program, uint offset)
++{
++ struct rp1_pio_add_program_args args;
++
++ if (bad_params_if(client, program->length > PIO_INSTRUCTION_COUNT ||
++ offset >= PIO_INSTRUCTION_COUNT))
++ return false;
++ args.origin = offset;
++ args.num_instrs = program->length;
++
++ memcpy(args.instrs, program->instructions, args.num_instrs * sizeof(args.instrs[0]));
++ return !rp1_pio_can_add_program(client, &args);
++}
++
++uint pio_add_program(struct rp1_pio_client *client, const pio_program_t *program)
++{
++ struct rp1_pio_add_program_args args;
++ int offset;
++
++ if (bad_params_if(client, program->length > PIO_INSTRUCTION_COUNT))
++ return PIO_ORIGIN_ANY;
++ args.origin = (program->origin == -1) ? PIO_ORIGIN_ANY : program->origin;
++ args.num_instrs = program->length;
++
++ memcpy(args.instrs, program->instructions, args.num_instrs * sizeof(args.instrs[0]));
++ offset = rp1_pio_add_program(client, &args);
++ return (offset >= 0) ? offset : PIO_ORIGIN_ANY;
++}
++
++static inline int pio_add_program_at_offset(struct rp1_pio_client *client,
++ const pio_program_t *program, uint offset)
++{
++ struct rp1_pio_add_program_args args;
++
++ if (bad_params_if(client, program->length > PIO_INSTRUCTION_COUNT ||
++ offset >= PIO_INSTRUCTION_COUNT))
++ return -EINVAL;
++ args.origin = offset;
++ args.num_instrs = program->length;
++
++ memcpy(args.instrs, program->instructions, args.num_instrs * sizeof(args.instrs[0]));
++ return rp1_pio_add_program(client, &args);
++}
++
++static inline int pio_remove_program(struct rp1_pio_client *client, const pio_program_t *program,
++ uint loaded_offset)
++{
++ struct rp1_pio_remove_program_args args;
++
++ args.origin = loaded_offset;
++ args.num_instrs = program->length;
++
++ return rp1_pio_remove_program(client, &args);
++}
++
++static inline int pio_clear_instruction_memory(struct rp1_pio_client *client)
++{
++ return rp1_pio_clear_instr_mem(client, NULL);
++}
++
++static inline int pio_sm_claim(struct rp1_pio_client *client, uint sm)
++{
++ struct rp1_pio_sm_claim_args args = { .mask = 1 << sm };
++
++ if (bad_params_if(client, sm >= NUM_PIO_STATE_MACHINES))
++ return -EINVAL;
++
++ return rp1_pio_sm_claim(client, &args);
++}
++
++static inline int pio_claim_sm_mask(struct rp1_pio_client *client, uint mask)
++{
++ struct rp1_pio_sm_claim_args args = { .mask = mask };
++
++ if (bad_params_if(client, mask >= (1 << NUM_PIO_STATE_MACHINES)))
++ return -EINVAL;
++
++ return rp1_pio_sm_claim(client, &args);
++}
++
++static inline int pio_sm_unclaim(struct rp1_pio_client *client, uint sm)
++{
++ struct rp1_pio_sm_claim_args args = { .mask = 1 << sm };
++
++ if (bad_params_if(client, sm >= NUM_PIO_STATE_MACHINES))
++ return -EINVAL;
++
++ return rp1_pio_sm_claim(client, &args);
++}
++
++static inline int pio_claim_unused_sm(struct rp1_pio_client *client, bool required)
++{
++ struct rp1_pio_sm_claim_args args = { .mask = 0 };
++ int sm;
++
++ sm = rp1_pio_sm_claim(client, &args);
++ if (sm < 0 && required)
++ WARN_ON("No PIO state machines are available");
++ return sm;
++}
++
++static inline bool pio_sm_is_claimed(struct rp1_pio_client *client, uint sm)
++{
++ struct rp1_pio_sm_claim_args args = { .mask = (1 << sm) };
++
++ if (bad_params_if(client, sm >= NUM_PIO_STATE_MACHINES))
++ return true;
++ return rp1_pio_sm_is_claimed(client, &args);
++}
++
++static inline int pio_sm_init(struct rp1_pio_client *client, uint sm, uint initial_pc,
++ const pio_sm_config *config)
++{
++ struct rp1_pio_sm_init_args args = { .sm = sm, .initial_pc = initial_pc,
++ .config = *config };
++
++ if (bad_params_if(client, sm >= NUM_PIO_STATE_MACHINES ||
++ initial_pc >= PIO_INSTRUCTION_COUNT))
++ return -EINVAL;
++
++ return rp1_pio_sm_init(client, &args);
++}
++
++static inline int pio_sm_set_config(struct rp1_pio_client *client, uint sm,
++ const pio_sm_config *config)
++{
++ struct rp1_pio_sm_init_args args = { .sm = sm, .config = *config };
++
++ if (bad_params_if(client, sm >= NUM_PIO_STATE_MACHINES))
++ return -EINVAL;
++
++ return rp1_pio_sm_set_config(client, &args);
++}
++
++int pio_sm_exec(struct rp1_pio_client *client, uint sm, uint instr)
++{
++ struct rp1_pio_sm_exec_args args = { .sm = sm, .instr = instr, .blocking = false };
++
++ if (bad_params_if(client, sm >= NUM_PIO_STATE_MACHINES || instr > (uint16_t)~0))
++ return -EINVAL;
++
++ return rp1_pio_sm_exec(client, &args);
++}
++
++int pio_sm_exec_wait_blocking(struct rp1_pio_client *client, uint sm, uint instr)
++{
++ struct rp1_pio_sm_exec_args args = { .sm = sm, .instr = instr, .blocking = true };
++
++ if (bad_params_if(client, sm >= NUM_PIO_STATE_MACHINES || instr > (uint16_t)~0))
++ return -EINVAL;
++
++ return rp1_pio_sm_exec(client, &args);
++}
++
++static inline int pio_sm_clear_fifos(struct rp1_pio_client *client, uint sm)
++{
++ struct rp1_pio_sm_clear_fifos_args args = { .sm = sm };
++
++ if (bad_params_if(client, sm >= NUM_PIO_STATE_MACHINES))
++ return -EINVAL;
++ return rp1_pio_sm_clear_fifos(client, &args);
++}
++
++static inline bool pio_calculate_clkdiv_from_float(float div, uint16_t *div_int,
++ uint8_t *div_frac)
++{
++ if (bad_params_if(NULL, div < 1 || div > 65536))
++ return false;
++ *div_int = (uint16_t)div;
++ if (*div_int == 0)
++ *div_frac = 0;
++ else
++ *div_frac = (uint8_t)((div - (float)*div_int) * (1u << 8u));
++ return true;
++}
++
++static inline int pio_sm_set_clkdiv_int_frac(struct rp1_pio_client *client, uint sm,
++ uint16_t div_int, uint8_t div_frac)
++{
++ struct rp1_pio_sm_set_clkdiv_args args = { .sm = sm, .div_int = div_int,
++ .div_frac = div_frac };
++
++ if (bad_params_if(client, sm >= NUM_PIO_STATE_MACHINES ||
++ (div_int == 0 && div_frac != 0)))
++ return -EINVAL;
++ return rp1_pio_sm_set_clkdiv(client, &args);
++}
++
++static inline int pio_sm_set_clkdiv(struct rp1_pio_client *client, uint sm, float div)
++{
++ struct rp1_pio_sm_set_clkdiv_args args = { .sm = sm };
++
++ if (!pio_calculate_clkdiv_from_float(div, &args.div_int, &args.div_frac))
++ return -EINVAL;
++ return rp1_pio_sm_set_clkdiv(client, &args);
++}
++
++static inline int pio_sm_set_pins(struct rp1_pio_client *client, uint sm, uint32_t pin_values)
++{
++ struct rp1_pio_sm_set_pins_args args = { .sm = sm, .values = pin_values,
++ .mask = GPIOS_MASK };
++
++ if (bad_params_if(client, sm >= NUM_PIO_STATE_MACHINES))
++ return -EINVAL;
++ return rp1_pio_sm_set_pins(client, &args);
++}
++
++static inline int pio_sm_set_pins_with_mask(struct rp1_pio_client *client, uint sm,
++ uint32_t pin_values, uint32_t pin_mask)
++{
++ struct rp1_pio_sm_set_pins_args args = { .sm = sm, .values = pin_values,
++ .mask = pin_mask };
++
++ if (bad_params_if(client, sm >= NUM_PIO_STATE_MACHINES))
++ return -EINVAL;
++ return rp1_pio_sm_set_pins(client, &args);
++}
++
++static inline int pio_sm_set_pindirs_with_mask(struct rp1_pio_client *client, uint sm,
++ uint32_t pin_dirs, uint32_t pin_mask)
++{
++ struct rp1_pio_sm_set_pindirs_args args = { .sm = sm, .dirs = pin_dirs,
++ .mask = pin_mask };
++
++ if (bad_params_if(client, sm >= NUM_PIO_STATE_MACHINES ||
++ (pin_dirs & GPIOS_MASK) != pin_dirs ||
++ (pin_mask & pin_mask) != pin_mask))
++ return -EINVAL;
++ return rp1_pio_sm_set_pindirs(client, &args);
++}
++
++static inline int pio_sm_set_consecutive_pindirs(struct rp1_pio_client *client, uint sm,
++ uint pin_base, uint pin_count, bool is_out)
++{
++ uint32_t mask = ((1 << pin_count) - 1) << pin_base;
++ struct rp1_pio_sm_set_pindirs_args args = { .sm = sm, .dirs = is_out ? mask : 0,
++ .mask = mask };
++
++ if (bad_params_if(client, sm >= NUM_PIO_STATE_MACHINES ||
++ pin_base >= RP1_PIO_GPIO_COUNT ||
++ pin_count > RP1_PIO_GPIO_COUNT ||
++ (pin_base + pin_count) > RP1_PIO_GPIO_COUNT))
++ return -EINVAL;
++ return rp1_pio_sm_set_pindirs(client, &args);
++}
++
++static inline int pio_sm_set_enabled(struct rp1_pio_client *client, uint sm, bool enabled)
++{
++ struct rp1_pio_sm_set_enabled_args args = { .mask = (1 << sm), .enable = enabled };
++
++ if (bad_params_if(client, sm >= NUM_PIO_STATE_MACHINES))
++ return -EINVAL;
++ return rp1_pio_sm_set_enabled(client, &args);
++}
++
++static inline int pio_set_sm_mask_enabled(struct rp1_pio_client *client, uint32_t mask,
++ bool enabled)
++{
++ struct rp1_pio_sm_set_enabled_args args = { .mask = mask, .enable = enabled };
++
++ if (bad_params_if(client, mask >= (1 << NUM_PIO_STATE_MACHINES)))
++ return -EINVAL;
++ return rp1_pio_sm_set_enabled(client, &args);
++}
++
++static inline int pio_sm_restart(struct rp1_pio_client *client, uint sm)
++{
++ struct rp1_pio_sm_restart_args args = { .mask = (1 << sm) };
++
++ if (bad_params_if(client, sm >= NUM_PIO_STATE_MACHINES))
++ return -EINVAL;
++ return rp1_pio_sm_restart(client, &args);
++}
++
++static inline int pio_restart_sm_mask(struct rp1_pio_client *client, uint32_t mask)
++{
++ struct rp1_pio_sm_restart_args args = { .mask = (uint16_t)mask };
++
++ if (bad_params_if(client, mask >= (1 << NUM_PIO_STATE_MACHINES)))
++ return -EINVAL;
++ return rp1_pio_sm_restart(client, &args);
++}
++
++static inline int pio_sm_clkdiv_restart(struct rp1_pio_client *client, uint sm)
++{
++ struct rp1_pio_sm_restart_args args = { .mask = (1 << sm) };
++
++ if (bad_params_if(client, sm >= NUM_PIO_STATE_MACHINES))
++ return -EINVAL;
++ return rp1_pio_sm_clkdiv_restart(client, &args);
++}
++
++static inline int pio_clkdiv_restart_sm_mask(struct rp1_pio_client *client, uint32_t mask)
++{
++ struct rp1_pio_sm_restart_args args = { .mask = (uint16_t)mask };
++
++ if (bad_params_if(client, mask >= (1 << NUM_PIO_STATE_MACHINES)))
++ return -EINVAL;
++ return rp1_pio_sm_clkdiv_restart(client, &args);
++}
++
++static inline int pio_enable_sm_in_sync_mask(struct rp1_pio_client *client, uint32_t mask)
++{
++ struct rp1_pio_sm_enable_sync_args args = { .mask = (uint16_t)mask };
++
++ if (bad_params_if(client, mask >= (1 << NUM_PIO_STATE_MACHINES)))
++ return -EINVAL;
++ return rp1_pio_sm_enable_sync(client, &args);
++}
++
++static inline int pio_sm_set_dmactrl(struct rp1_pio_client *client, uint sm, bool is_tx,
++ uint32_t ctrl)
++{
++ struct rp1_pio_sm_set_dmactrl_args args = { .sm = sm, .is_tx = is_tx, .ctrl = ctrl };
++
++ if (bad_params_if(client, sm >= NUM_PIO_STATE_MACHINES))
++ return -EINVAL;
++ return rp1_pio_sm_set_dmactrl(client, &args);
++};
++
++static inline int pio_sm_put(struct rp1_pio_client *client, uint sm, uint32_t data)
++{
++ struct rp1_pio_sm_put_args args = { .sm = (uint16_t)sm, .blocking = false, .data = data };
++
++ if (bad_params_if(client, sm >= NUM_PIO_STATE_MACHINES))
++ return -EINVAL;
++ return rp1_pio_sm_put(client, &args);
++}
++
++static inline int pio_sm_put_blocking(struct rp1_pio_client *client, uint sm, uint32_t data)
++{
++ struct rp1_pio_sm_put_args args = { .sm = (uint16_t)sm, .blocking = true, .data = data };
++
++ if (bad_params_if(client, sm >= NUM_PIO_STATE_MACHINES))
++ return -EINVAL;
++ return rp1_pio_sm_put(client, &args);
++}
++
++static inline uint32_t pio_sm_get(struct rp1_pio_client *client, uint sm)
++{
++ struct rp1_pio_sm_get_args args = { .sm = (uint16_t)sm, .blocking = false };
++
++ if (!bad_params_if(client, sm >= NUM_PIO_STATE_MACHINES))
++ rp1_pio_sm_get(client, &args);
++ return args.data;
++}
++
++static inline uint32_t pio_sm_get_blocking(struct rp1_pio_client *client, uint sm)
++{
++ struct rp1_pio_sm_get_args args = { .sm = (uint16_t)sm, .blocking = true };
++
++ if (!bad_params_if(client, sm >= NUM_PIO_STATE_MACHINES))
++ rp1_pio_sm_get(client, &args);
++ return args.data;
++}
++
++static inline void sm_config_set_out_pins(pio_sm_config *c, uint out_base, uint out_count)
++{
++ if (bad_params_if(NULL, out_base >= RP1_PIO_GPIO_COUNT ||
++ out_count > RP1_PIO_GPIO_COUNT))
++ return;
++
++ c->pinctrl = (c->pinctrl & ~(PROC_PIO_SM0_PINCTRL_OUT_BASE_BITS |
++ PROC_PIO_SM0_PINCTRL_OUT_COUNT_BITS)) |
++ (out_base << PROC_PIO_SM0_PINCTRL_OUT_BASE_LSB) |
++ (out_count << PROC_PIO_SM0_PINCTRL_OUT_COUNT_LSB);
++}
++
++static inline void sm_config_set_set_pins(pio_sm_config *c, uint set_base, uint set_count)
++{
++ if (bad_params_if(NULL, set_base >= RP1_PIO_GPIO_COUNT ||
++ set_count > 5))
++ return;
++
++ c->pinctrl = (c->pinctrl & ~(PROC_PIO_SM0_PINCTRL_SET_BASE_BITS |
++ PROC_PIO_SM0_PINCTRL_SET_COUNT_BITS)) |
++ (set_base << PROC_PIO_SM0_PINCTRL_SET_BASE_LSB) |
++ (set_count << PROC_PIO_SM0_PINCTRL_SET_COUNT_LSB);
++}
++
++
++static inline void sm_config_set_in_pins(pio_sm_config *c, uint in_base)
++{
++ if (bad_params_if(NULL, in_base >= RP1_PIO_GPIO_COUNT))
++ return;
++
++ c->pinctrl = (c->pinctrl & ~PROC_PIO_SM0_PINCTRL_IN_BASE_BITS) |
++ (in_base << PROC_PIO_SM0_PINCTRL_IN_BASE_LSB);
++}
++
++static inline void sm_config_set_sideset_pins(pio_sm_config *c, uint sideset_base)
++{
++ if (bad_params_if(NULL, sideset_base >= RP1_PIO_GPIO_COUNT))
++ return;
++
++ c->pinctrl = (c->pinctrl & ~PROC_PIO_SM0_PINCTRL_SIDESET_BASE_BITS) |
++ (sideset_base << PROC_PIO_SM0_PINCTRL_SIDESET_BASE_LSB);
++}
++
++static inline void sm_config_set_sideset(pio_sm_config *c, uint bit_count, bool optional,
++ bool pindirs)
++{
++ if (bad_params_if(NULL, bit_count > 5 ||
++ (optional && (bit_count == 0))))
++ return;
++ c->pinctrl = (c->pinctrl & ~PROC_PIO_SM0_PINCTRL_SIDESET_COUNT_BITS) |
++ (bit_count << PROC_PIO_SM0_PINCTRL_SIDESET_COUNT_LSB);
++
++ c->execctrl = (c->execctrl & ~(PROC_PIO_SM0_EXECCTRL_SIDE_EN_BITS |
++ PROC_PIO_SM0_EXECCTRL_SIDE_PINDIR_BITS)) |
++ (optional << PROC_PIO_SM0_EXECCTRL_SIDE_EN_LSB) |
++ (pindirs << PROC_PIO_SM0_EXECCTRL_SIDE_PINDIR_LSB);
++}
++
++static inline void sm_config_set_clkdiv_int_frac(pio_sm_config *c, uint16_t div_int,
++ uint8_t div_frac)
++{
++ if (bad_params_if(NULL, div_int == 0 && div_frac != 0))
++ return;
++
++ c->clkdiv =
++ (((uint)div_frac) << PROC_PIO_SM0_CLKDIV_FRAC_LSB) |
++ (((uint)div_int) << PROC_PIO_SM0_CLKDIV_INT_LSB);
++}
++
++static inline void sm_config_set_clkdiv(pio_sm_config *c, float div)
++{
++ uint16_t div_int;
++ uint8_t div_frac;
++
++ pio_calculate_clkdiv_from_float(div, &div_int, &div_frac);
++ sm_config_set_clkdiv_int_frac(c, div_int, div_frac);
++}
++
++static inline void sm_config_set_wrap(pio_sm_config *c, uint wrap_target, uint wrap)
++{
++ if (bad_params_if(NULL, wrap >= PIO_INSTRUCTION_COUNT ||
++ wrap_target >= PIO_INSTRUCTION_COUNT))
++ return;
++
++ c->execctrl = (c->execctrl & ~(PROC_PIO_SM0_EXECCTRL_WRAP_TOP_BITS |
++ PROC_PIO_SM0_EXECCTRL_WRAP_BOTTOM_BITS)) |
++ (wrap_target << PROC_PIO_SM0_EXECCTRL_WRAP_BOTTOM_LSB) |
++ (wrap << PROC_PIO_SM0_EXECCTRL_WRAP_TOP_LSB);
++}
++
++static inline void sm_config_set_jmp_pin(pio_sm_config *c, uint pin)
++{
++ if (bad_params_if(NULL, pin >= RP1_PIO_GPIO_COUNT))
++ return;
++
++ c->execctrl = (c->execctrl & ~PROC_PIO_SM0_EXECCTRL_JMP_PIN_BITS) |
++ (pin << PROC_PIO_SM0_EXECCTRL_JMP_PIN_LSB);
++}
++
++static inline void sm_config_set_in_shift(pio_sm_config *c, bool shift_right, bool autopush,
++ uint push_threshold)
++{
++ if (bad_params_if(NULL, push_threshold > 32))
++ return;
++
++ c->shiftctrl = (c->shiftctrl &
++ ~(PROC_PIO_SM0_SHIFTCTRL_IN_SHIFTDIR_BITS |
++ PROC_PIO_SM0_SHIFTCTRL_AUTOPUSH_BITS |
++ PROC_PIO_SM0_SHIFTCTRL_PUSH_THRESH_BITS)) |
++ (shift_right << PROC_PIO_SM0_SHIFTCTRL_IN_SHIFTDIR_LSB) |
++ (autopush << PROC_PIO_SM0_SHIFTCTRL_AUTOPUSH_LSB) |
++ ((push_threshold & 0x1fu) << PROC_PIO_SM0_SHIFTCTRL_PUSH_THRESH_LSB);
++}
++
++static inline void sm_config_set_out_shift(pio_sm_config *c, bool shift_right, bool autopull,
++ uint pull_threshold)
++{
++ if (bad_params_if(NULL, pull_threshold > 32))
++ return;
++
++ c->shiftctrl = (c->shiftctrl &
++ ~(PROC_PIO_SM0_SHIFTCTRL_OUT_SHIFTDIR_BITS |
++ PROC_PIO_SM0_SHIFTCTRL_AUTOPULL_BITS |
++ PROC_PIO_SM0_SHIFTCTRL_PULL_THRESH_BITS)) |
++ (shift_right << PROC_PIO_SM0_SHIFTCTRL_OUT_SHIFTDIR_LSB) |
++ (autopull << PROC_PIO_SM0_SHIFTCTRL_AUTOPULL_LSB) |
++ ((pull_threshold & 0x1fu) << PROC_PIO_SM0_SHIFTCTRL_PULL_THRESH_LSB);
++}
++
++static inline void sm_config_set_fifo_join(pio_sm_config *c, enum pio_fifo_join join)
++{
++ if (bad_params_if(NULL, join != PIO_FIFO_JOIN_NONE &&
++ join != PIO_FIFO_JOIN_TX &&
++ join != PIO_FIFO_JOIN_RX))
++ return;
++
++ c->shiftctrl = (c->shiftctrl & (uint)~(PROC_PIO_SM0_SHIFTCTRL_FJOIN_TX_BITS |
++ PROC_PIO_SM0_SHIFTCTRL_FJOIN_RX_BITS)) |
++ (((uint)join) << PROC_PIO_SM0_SHIFTCTRL_FJOIN_TX_LSB);
++}
++
++static inline void sm_config_set_out_special(pio_sm_config *c, bool sticky, bool has_enable_pin,
++ uint enable_pin_index)
++{
++ c->execctrl = (c->execctrl &
++ (uint)~(PROC_PIO_SM0_EXECCTRL_OUT_STICKY_BITS |
++ PROC_PIO_SM0_EXECCTRL_INLINE_OUT_EN_BITS |
++ PROC_PIO_SM0_EXECCTRL_OUT_EN_SEL_BITS)) |
++ (sticky << PROC_PIO_SM0_EXECCTRL_OUT_STICKY_LSB) |
++ (has_enable_pin << PROC_PIO_SM0_EXECCTRL_INLINE_OUT_EN_LSB) |
++ ((enable_pin_index << PROC_PIO_SM0_EXECCTRL_OUT_EN_SEL_LSB) &
++ PROC_PIO_SM0_EXECCTRL_OUT_EN_SEL_BITS);
++}
++
++static inline void sm_config_set_mov_status(pio_sm_config *c, enum pio_mov_status_type status_sel,
++ uint status_n)
++{
++ if (bad_params_if(NULL, status_sel != STATUS_TX_LESSTHAN &&
++ status_sel != STATUS_RX_LESSTHAN))
++ return;
++
++ c->execctrl = (c->execctrl
++ & ~(PROC_PIO_SM0_EXECCTRL_STATUS_SEL_BITS | PROC_PIO_SM0_EXECCTRL_STATUS_N_BITS))
++ | ((((uint)status_sel) << PROC_PIO_SM0_EXECCTRL_STATUS_SEL_LSB) &
++ PROC_PIO_SM0_EXECCTRL_STATUS_SEL_BITS)
++ | ((status_n << PROC_PIO_SM0_EXECCTRL_STATUS_N_LSB) &
++ PROC_PIO_SM0_EXECCTRL_STATUS_N_BITS);
++}
++
++static inline pio_sm_config pio_get_default_sm_config(void)
++{
++ pio_sm_config c = { 0 };
++
++ sm_config_set_clkdiv_int_frac(&c, 1, 0);
++ sm_config_set_wrap(&c, 0, 31);
++ sm_config_set_in_shift(&c, true, false, 32);
++ sm_config_set_out_shift(&c, true, false, 32);
++ return c;
++}
++
++static inline uint32_t clock_get_hz(enum clock_index clk_index)
++{
++ const uint32_t MHZ = 1000000;
++
++ if (bad_params_if(NULL, clk_index != clk_sys))
++ return 0;
++ return 200 * MHZ;
++}
++
++static inline int pio_gpio_set_function(struct rp1_pio_client *client, uint gpio,
++ enum gpio_function fn)
++{
++ struct rp1_gpio_set_function_args args = { .gpio = gpio, .fn = fn };
++
++ if (bad_params_if(client, gpio >= RP1_PIO_GPIO_COUNT))
++ return -EINVAL;
++ return rp1_pio_gpio_set_function(client, &args);
++}
++
++static inline int pio_gpio_init(struct rp1_pio_client *client, uint gpio)
++{
++ struct rp1_gpio_init_args args = { .gpio = gpio };
++ int ret;
++
++ if (bad_params_if(client, gpio >= RP1_PIO_GPIO_COUNT))
++ return -EINVAL;
++ ret = rp1_pio_gpio_init(client, &args);
++ if (ret)
++ return ret;
++ return pio_gpio_set_function(client, gpio, RP1_GPIO_FUNC_PIO);
++}
++
++static inline int pio_gpio_set_pulls(struct rp1_pio_client *client, uint gpio, bool up, bool down)
++{
++ struct rp1_gpio_set_pulls_args args = { .gpio = gpio, .up = up, .down = down };
++
++ if (bad_params_if(client, gpio >= RP1_PIO_GPIO_COUNT))
++ return -EINVAL;
++ return rp1_pio_gpio_set_pulls(client, &args);
++}
++
++static inline int pio_gpio_set_outover(struct rp1_pio_client *client, uint gpio, uint value)
++{
++ struct rp1_gpio_set_args args = { .gpio = gpio, .value = value };
++
++ if (bad_params_if(client, gpio >= RP1_PIO_GPIO_COUNT))
++ return -EINVAL;
++ return rp1_pio_gpio_set_outover(client, &args);
++}
++
++static inline int pio_gpio_set_inover(struct rp1_pio_client *client, uint gpio, uint value)
++{
++ struct rp1_gpio_set_args args = { .gpio = gpio, .value = value };
++
++ if (bad_params_if(client, gpio >= RP1_PIO_GPIO_COUNT))
++ return -EINVAL;
++ return rp1_pio_gpio_set_inover(client, &args);
++}
++
++static inline int pio_gpio_set_oeover(struct rp1_pio_client *client, uint gpio, uint value)
++{
++ struct rp1_gpio_set_args args = { .gpio = gpio, .value = value };
++
++ if (bad_params_if(client, gpio >= RP1_PIO_GPIO_COUNT))
++ return -EINVAL;
++ return rp1_pio_gpio_set_oeover(client, &args);
++}
++
++static inline int pio_gpio_set_input_enabled(struct rp1_pio_client *client, uint gpio,
++ bool enabled)
++{
++ struct rp1_gpio_set_args args = { .gpio = gpio, .value = enabled };
++
++ if (bad_params_if(client, gpio >= RP1_PIO_GPIO_COUNT))
++ return -EINVAL;
++ return rp1_pio_gpio_set_input_enabled(client, &args);
++}
++
++static inline int pio_gpio_set_drive_strength(struct rp1_pio_client *client, uint gpio,
++ enum gpio_drive_strength drive)
++{
++ struct rp1_gpio_set_args args = { .gpio = gpio, .value = drive };
++
++ if (bad_params_if(client, gpio >= RP1_PIO_GPIO_COUNT))
++ return -EINVAL;
++ return rp1_pio_gpio_set_drive_strength(client, &args);
++}
++
++static inline int pio_gpio_pull_up(struct rp1_pio_client *client, uint gpio)
++{
++ return pio_gpio_set_pulls(client, gpio, true, false);
++}
++
++static inline int pio_gpio_pull_down(struct rp1_pio_client *client, uint gpio)
++{
++ return pio_gpio_set_pulls(client, gpio, false, true);
++}
++
++static inline int pio_gpio_disable_pulls(struct rp1_pio_client *client, uint gpio)
++{
++ return pio_gpio_set_pulls(client, gpio, false, false);
++}
++
++#endif
diff --git a/target/linux/bcm27xx/patches-6.6/950-1356-pwm-Add-pwm-pio-rp1-driver.patch b/target/linux/bcm27xx/patches-6.6/950-1356-pwm-Add-pwm-pio-rp1-driver.patch
new file mode 100644
index 0000000000..3f787de9d9
--- /dev/null
+++ b/target/linux/bcm27xx/patches-6.6/950-1356-pwm-Add-pwm-pio-rp1-driver.patch
@@ -0,0 +1,299 @@
+From 4d20aadc3188ecfb62b309a9924ee9696a94fc33 Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil at raspberrypi.com>
+Date: Fri, 8 Nov 2024 09:37:58 +0000
+Subject: [PATCH] pwm: Add pwm-pio-rp1 driver
+
+Use the PIO hardware on RP1 to implement a PWM interface.
+
+Signed-off-by: Phil Elwell <phil at raspberrypi.com>
+---
+ drivers/pwm/Kconfig | 11 ++
+ drivers/pwm/Makefile | 1 +
+ drivers/pwm/pwm-pio-rp1.c | 251 ++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 263 insertions(+)
+ create mode 100644 drivers/pwm/pwm-pio-rp1.c
+
+--- a/drivers/pwm/Kconfig
++++ b/drivers/pwm/Kconfig
+@@ -454,6 +454,17 @@ config PWM_PCA9685
+ To compile this driver as a module, choose M here: the module
+ will be called pwm-pca9685.
+
++config PWM_PIO_RP1
++ tristate "RP1 PIO PWM support"
++ depends on FIRMWARE_RP1 || COMPILE_TEST
++ help
++ This is a PWM framework driver for Raspberry Pi 5, using the PIO
++ hardware of RP1 to provide PWM functionality. Supports up to 4
++ instances on GPIOs in bank 0.
++
++ To compile this driver as a module, choose M here: the module
++ will be called pwm-pio-rp1.
++
+ config PWM_PXA
+ tristate "PXA PWM support"
+ depends on ARCH_PXA || ARCH_MMP || COMPILE_TEST
+--- a/drivers/pwm/Makefile
++++ b/drivers/pwm/Makefile
+@@ -41,6 +41,7 @@ obj-$(CONFIG_PWM_MXS) += pwm-mxs.o
+ obj-$(CONFIG_PWM_NTXEC) += pwm-ntxec.o
+ obj-$(CONFIG_PWM_OMAP_DMTIMER) += pwm-omap-dmtimer.o
+ obj-$(CONFIG_PWM_PCA9685) += pwm-pca9685.o
++obj-$(CONFIG_PWM_PIO_RP1) += pwm-pio-rp1.o
+ obj-$(CONFIG_PWM_PXA) += pwm-pxa.o
+ obj-$(CONFIG_PWM_RASPBERRYPI_POE) += pwm-raspberrypi-poe.o
+ obj-$(CONFIG_PWM_RP1) += pwm-rp1.o
+--- /dev/null
++++ b/drivers/pwm/pwm-pio-rp1.c
+@@ -0,0 +1,251 @@
++// SPDX-License-Identifier: GPL-2.0-only
++/*
++ * Raspberry Pi PIO PWM.
++ *
++ * Copyright (C) 2024 Raspberry Pi Ltd.
++ *
++ * Author: Phil Elwell (phil at raspberrypi.com)
++ *
++ * Based on the pwm-rp1 driver by:
++ * Naushir Patuck <naush at raspberrypi.com>
++ * and on the pwm-gpio driver by:
++ * Vincent Whitchurch <vincent.whitchurch at axis.com>
++ */
++
++#include <linux/err.h>
++#include <linux/gpio/consumer.h>
++#include <linux/module.h>
++#include <linux/mutex.h>
++#include <linux/of.h>
++#include <linux/pio_rp1.h>
++#include <linux/platform_device.h>
++#include <linux/pwm.h>
++
++struct pwm_pio_rp1 {
++ struct pwm_chip chip;
++ struct device *dev;
++ struct gpio_desc *gpiod;
++ struct mutex mutex;
++ PIO pio;
++ uint sm;
++ uint offset;
++ uint gpio;
++ uint32_t period; /* In SM cycles */
++ uint32_t duty_cycle; /* In SM cycles */
++ enum pwm_polarity polarity;
++ bool enabled;
++};
++
++/* Generated from pwm.pio by pioasm */
++#define pwm_wrap_target 0
++#define pwm_wrap 6
++#define pwm_loop_ticks 3
++
++static const uint16_t pwm_program_instructions[] = {
++ // .wrap_target
++ 0x9080, // 0: pull noblock side 0
++ 0xa027, // 1: mov x, osr
++ 0xa046, // 2: mov y, isr
++ 0x00a5, // 3: jmp x != y, 5
++ 0x1806, // 4: jmp 6 side 1
++ 0xa042, // 5: nop
++ 0x0083, // 6: jmp y--, 3
++ // .wrap
++};
++
++static const struct pio_program pwm_program = {
++ .instructions = pwm_program_instructions,
++ .length = 7,
++ .origin = -1,
++};
++
++static unsigned int pwm_pio_resolution __read_mostly;
++
++static inline pio_sm_config pwm_program_get_default_config(uint offset)
++{
++ pio_sm_config c = pio_get_default_sm_config();
++
++ sm_config_set_wrap(&c, offset + pwm_wrap_target, offset + pwm_wrap);
++ sm_config_set_sideset(&c, 2, true, false);
++ return c;
++}
++
++static inline void pwm_program_init(PIO pio, uint sm, uint offset, uint pin)
++{
++ pio_gpio_init(pio, pin);
++
++ pio_sm_set_consecutive_pindirs(pio, sm, pin, 1, true);
++ pio_sm_config c = pwm_program_get_default_config(offset);
++
++ sm_config_set_sideset_pins(&c, pin);
++ pio_sm_init(pio, sm, offset, &c);
++}
++
++/* Write `period` to the input shift register - must be disabled */
++static void pio_pwm_set_period(PIO pio, uint sm, uint32_t period)
++{
++ pio_sm_put_blocking(pio, sm, period);
++ pio_sm_exec(pio, sm, pio_encode_pull(false, false));
++ pio_sm_exec(pio, sm, pio_encode_out(pio_isr, 32));
++}
++
++/* Write `level` to TX FIFO. State machine will copy this into X. */
++static void pio_pwm_set_level(PIO pio, uint sm, uint32_t level)
++{
++ pio_sm_put_blocking(pio, sm, level);
++}
++
++static int pwm_pio_rp1_apply(struct pwm_chip *chip, struct pwm_device *pwm,
++ const struct pwm_state *state)
++{
++ struct pwm_pio_rp1 *ppwm = container_of(chip, struct pwm_pio_rp1, chip);
++ uint32_t new_duty_cycle;
++ uint32_t new_period;
++
++ if (state->duty_cycle && state->duty_cycle < pwm_pio_resolution)
++ return -EINVAL;
++
++ if (state->duty_cycle != state->period &&
++ (state->period - state->duty_cycle < pwm_pio_resolution))
++ return -EINVAL;
++
++ new_period = state->period / pwm_pio_resolution;
++ new_duty_cycle = state->duty_cycle / pwm_pio_resolution;
++
++ mutex_lock(&ppwm->mutex);
++
++ if ((ppwm->enabled && !state->enabled) || new_period != ppwm->period) {
++ pio_sm_set_enabled(ppwm->pio, ppwm->sm, false);
++ ppwm->enabled = false;
++ }
++
++ if (new_period != ppwm->period) {
++ pio_pwm_set_period(ppwm->pio, ppwm->sm, new_period);
++ ppwm->period = new_period;
++ }
++
++ if (state->enabled && new_duty_cycle != ppwm->duty_cycle) {
++ pio_pwm_set_level(ppwm->pio, ppwm->sm, new_duty_cycle);
++ ppwm->duty_cycle = new_duty_cycle;
++ }
++
++ if (state->polarity != ppwm->polarity) {
++ pio_gpio_set_outover(ppwm->pio, ppwm->gpio,
++ (state->polarity == PWM_POLARITY_INVERSED) ?
++ GPIO_OVERRIDE_INVERT : GPIO_OVERRIDE_NORMAL);
++ ppwm->polarity = state->polarity;
++ }
++
++ if (!ppwm->enabled && state->enabled) {
++ pio_sm_set_enabled(ppwm->pio, ppwm->sm, true);
++ ppwm->enabled = true;
++ }
++
++ mutex_unlock(&ppwm->mutex);
++
++ return 0;
++}
++
++static const struct pwm_ops pwm_pio_rp1_ops = {
++ .apply = pwm_pio_rp1_apply,
++};
++
++static int pwm_pio_rp1_probe(struct platform_device *pdev)
++{
++ struct device_node *np = pdev->dev.of_node;
++ struct of_phandle_args of_args = { 0 };
++ struct device *dev = &pdev->dev;
++ struct pwm_pio_rp1 *ppwm;
++ struct pwm_chip *chip;
++ bool is_rp1;
++
++ ppwm = devm_kzalloc(dev, sizeof(*ppwm), GFP_KERNEL);
++ if (IS_ERR(ppwm))
++ return PTR_ERR(ppwm);
++
++ chip = &ppwm->chip;
++
++ mutex_init(&ppwm->mutex);
++
++ ppwm->gpiod = devm_gpiod_get(dev, NULL, GPIOD_ASIS);
++ /* Need to check that this is an RP1 GPIO in the first bank, and retrieve the offset */
++ /* Unfortunately I think this has to be done by parsing the gpios property */
++ if (IS_ERR(ppwm->gpiod))
++ return dev_err_probe(dev, PTR_ERR(ppwm->gpiod),
++ "could not get a gpio\n");
++
++ /* This really shouldn't fail, given that we have a gpiod */
++ if (of_parse_phandle_with_args(np, "gpios", "#gpio-cells", 0, &of_args))
++ return dev_err_probe(dev, -EINVAL,
++ "can't find gpio declaration\n");
++
++ is_rp1 = of_device_is_compatible(of_args.np, "raspberrypi,rp1-gpio");
++ of_node_put(of_args.np);
++ if (!is_rp1 || of_args.args_count != 2)
++ return dev_err_probe(dev, -EINVAL,
++ "not an RP1 gpio\n");
++
++ ppwm->gpio = of_args.args[0];
++
++ ppwm->pio = pio_open();
++ if (IS_ERR(ppwm->pio))
++ return dev_err_probe(dev, PTR_ERR(ppwm->pio),
++ "%pfw: could not open PIO\n",
++ dev_fwnode(dev));
++
++ ppwm->sm = pio_claim_unused_sm(ppwm->pio, false);
++ if ((int)ppwm->sm < 0) {
++ pio_close(ppwm->pio);
++ return dev_err_probe(dev, -EBUSY,
++ "%pfw: no free PIO SM\n",
++ dev_fwnode(dev));
++ }
++
++ ppwm->offset = pio_add_program(ppwm->pio, &pwm_program);
++ if (ppwm->offset == PIO_ORIGIN_ANY) {
++ pio_close(ppwm->pio);
++ return dev_err_probe(dev, -EBUSY,
++ "%pfw: not enough PIO program space\n",
++ dev_fwnode(dev));
++ }
++
++ pwm_program_init(ppwm->pio, ppwm->sm, ppwm->offset, ppwm->gpio);
++
++ pwm_pio_resolution = (1000u * 1000 * 1000 * pwm_loop_ticks) / clock_get_hz(clk_sys);
++
++ chip->dev = dev;
++ chip->ops = &pwm_pio_rp1_ops;
++ chip->atomic = true;
++ chip->npwm = 1;
++
++ platform_set_drvdata(pdev, ppwm);
++
++ return devm_pwmchip_add(dev, chip);
++}
++
++static void pwm_pio_rp1_remove(struct platform_device *pdev)
++{
++ struct pwm_pio_rp1 *ppwm = platform_get_drvdata(pdev);
++
++ pio_close(ppwm->pio);
++}
++
++static const struct of_device_id pwm_pio_rp1_dt_ids[] = {
++ { .compatible = "raspberrypi,pwm-pio-rp1" },
++ { /* sentinel */ }
++};
++MODULE_DEVICE_TABLE(of, pwm_pio_rp1_dt_ids);
++
++static struct platform_driver pwm_pio_rp1_driver = {
++ .driver = {
++ .name = "pwm-pio-rp1",
++ .of_match_table = pwm_pio_rp1_dt_ids,
++ },
++ .probe = pwm_pio_rp1_probe,
++ .remove_new = pwm_pio_rp1_remove,
++};
++module_platform_driver(pwm_pio_rp1_driver);
++
++MODULE_DESCRIPTION("PWM PIO RP1 driver");
++MODULE_AUTHOR("Phil Elwell");
++MODULE_LICENSE("GPL");
diff --git a/target/linux/bcm27xx/patches-6.6/950-1357-misc-rp1-pio-Fix-copy-paste-error-in-pio_rp1.h.patch b/target/linux/bcm27xx/patches-6.6/950-1357-misc-rp1-pio-Fix-copy-paste-error-in-pio_rp1.h.patch
new file mode 100644
index 0000000000..0746e3c32b
--- /dev/null
+++ b/target/linux/bcm27xx/patches-6.6/950-1357-misc-rp1-pio-Fix-copy-paste-error-in-pio_rp1.h.patch
@@ -0,0 +1,25 @@
+From 99a0201bb0abc946dc431214b638b2cc6b01dda5 Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil at raspberrypi.com>
+Date: Mon, 25 Nov 2024 16:19:55 +0000
+Subject: [PATCH] misc/rp1-pio: Fix copy/paste error in pio_rp1.h
+
+As per the subject, there was a copy/paste error that caused
+pio_sm_unclaim from a driver to result in a call to
+pio_sm_claim. Fix it.
+
+Signed-off-by: Phil Elwell <phil at raspberrypi.com>
+---
+ include/linux/pio_rp1.h | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/include/linux/pio_rp1.h
++++ b/include/linux/pio_rp1.h
+@@ -318,7 +318,7 @@ static inline int pio_sm_unclaim(struct
+ if (bad_params_if(client, sm >= NUM_PIO_STATE_MACHINES))
+ return -EINVAL;
+
+- return rp1_pio_sm_claim(client, &args);
++ return rp1_pio_sm_unclaim(client, &args);
+ }
+
+ static inline int pio_claim_unused_sm(struct rp1_pio_client *client, bool required)
diff --git a/target/linux/bcm27xx/patches-6.6/950-1357-rpi-pio-add-missing.patch b/target/linux/bcm27xx/patches-6.6/950-1357-rpi-pio-add-missing.patch
new file mode 100644
index 0000000000..c871fa681f
--- /dev/null
+++ b/target/linux/bcm27xx/patches-6.6/950-1357-rpi-pio-add-missing.patch
@@ -0,0 +1,42 @@
+From df8a2f6dc114b2c5c7685a069f717f2b06186b74 Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil at raspberrypi.com>
+Date: Wed, 20 Nov 2024 16:23:06 +0000
+Subject: [PATCH] rp1-pio: Add missing 'static inline's
+
+Avoid some duplicate symbol errors by adding some missing
+'static inline' decorations.
+
+Signed-off-by: Phil Elwell <phil at raspberrypi.com>
+---
+ include/linux/pio_rp1.h | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+--- a/include/linux/pio_rp1.h
++++ b/include/linux/pio_rp1.h
+@@ -245,7 +245,7 @@ static inline bool pio_can_add_program_a
+ return !rp1_pio_can_add_program(client, &args);
+ }
+
+-uint pio_add_program(struct rp1_pio_client *client, const pio_program_t *program)
++static inline uint pio_add_program(struct rp1_pio_client *client, const pio_program_t *program)
+ {
+ struct rp1_pio_add_program_args args;
+ int offset;
+@@ -365,7 +365,7 @@ static inline int pio_sm_set_config(stru
+ return rp1_pio_sm_set_config(client, &args);
+ }
+
+-int pio_sm_exec(struct rp1_pio_client *client, uint sm, uint instr)
++static inline int pio_sm_exec(struct rp1_pio_client *client, uint sm, uint instr)
+ {
+ struct rp1_pio_sm_exec_args args = { .sm = sm, .instr = instr, .blocking = false };
+
+@@ -375,7 +375,7 @@ int pio_sm_exec(struct rp1_pio_client *c
+ return rp1_pio_sm_exec(client, &args);
+ }
+
+-int pio_sm_exec_wait_blocking(struct rp1_pio_client *client, uint sm, uint instr)
++static inline int pio_sm_exec_wait_blocking(struct rp1_pio_client *client, uint sm, uint instr)
+ {
+ struct rp1_pio_sm_exec_args args = { .sm = sm, .instr = instr, .blocking = true };
+
diff --git a/target/linux/bcm27xx/patches-6.6/950-1358-misc-rpi-pio-back-port-some.patch b/target/linux/bcm27xx/patches-6.6/950-1358-misc-rpi-pio-back-port-some.patch
new file mode 100644
index 0000000000..92bde521d2
--- /dev/null
+++ b/target/linux/bcm27xx/patches-6.6/950-1358-misc-rpi-pio-back-port-some.patch
@@ -0,0 +1,39 @@
+From d1f0c94e974a5f26d210b1d13a6ef9543bee4984 Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil at raspberrypi.com>
+Date: Thu, 21 Nov 2024 11:11:48 +0000
+Subject: [PATCH] misc: rp1-pio: Back-port some 6.11 build fixes
+
+Porting rp1-pio to rpi-6.11.y uncovered a few missing #includes and a
+difference of const-ness. Although not needed here, back-porting the
+resulting changes makes the driver more "correct" and may prevent a
+future merge conflict.
+
+Signed-off-by: Phil Elwell <phil at raspberrypi.com>
+---
+ drivers/misc/rp1-pio.c | 3 +++
+ include/linux/pio_rp1.h | 2 +-
+ 2 files changed, 4 insertions(+), 1 deletion(-)
+
+--- a/drivers/misc/rp1-pio.c
++++ b/drivers/misc/rp1-pio.c
+@@ -22,6 +22,9 @@
+ #include <linux/init.h>
+ #include <linux/ioctl.h>
+ #include <linux/module.h>
++#include <linux/of.h>
++#include <linux/pio_rp1.h>
++#include <linux/platform_device.h>
+ #include <linux/rp1-firmware.h>
+ #include <linux/semaphore.h>
+ #include <linux/slab.h>
+--- a/include/linux/pio_rp1.h
++++ b/include/linux/pio_rp1.h
+@@ -176,7 +176,7 @@ typedef rp1_pio_sm_config pio_sm_config;
+ typedef struct rp1_pio_client *PIO;
+
+ void pio_set_error(struct rp1_pio_client *client, int err);
+-int pio_get_error(struct rp1_pio_client *client);
++int pio_get_error(const struct rp1_pio_client *client);
+ void pio_clear_error(struct rp1_pio_client *client);
+
+ int rp1_pio_can_add_program(struct rp1_pio_client *client, void *param);
diff --git a/target/linux/bcm27xx/patches-6.6/950-1359-misc-rp1-pio-Add-FIFO.patch b/target/linux/bcm27xx/patches-6.6/950-1359-misc-rp1-pio-Add-FIFO.patch
new file mode 100644
index 0000000000..fff033f5a6
--- /dev/null
+++ b/target/linux/bcm27xx/patches-6.6/950-1359-misc-rp1-pio-Add-FIFO.patch
@@ -0,0 +1,215 @@
+From dd2394360860d15146c96635796a75b05bb32b61 Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil at raspberrypi.com>
+Date: Tue, 19 Nov 2024 09:25:34 +0000
+Subject: [PATCH] misc: rp1-pio: Add FIFO-related methods
+
+Add support for querying the FIFO status and clearing the TX FIFO.
+
+Signed-off-by: Phil Elwell <phil at raspberrypi.com>
+---
+ drivers/misc/rp1-fw-pio.h | 3 ++
+ drivers/misc/rp1-pio.c | 24 +++++++++
+ include/linux/pio_rp1.h | 89 ++++++++++++++++++++++++++++++++++
+ include/uapi/misc/rp1_pio_if.h | 13 ++++-
+ 4 files changed, 128 insertions(+), 1 deletion(-)
+
+--- a/drivers/misc/rp1-fw-pio.h
++++ b/drivers/misc/rp1-fw-pio.h
+@@ -47,6 +47,9 @@ enum rp1_pio_ops {
+ READ_HW, // src address, len -> data bytes
+ WRITE_HW, // dst address, data
+
++ PIO_SM_FIFO_STATE, // u16 sm, u8 tx -> u16 level, u8 empty, u8 full
++ PIO_SM_DRAIN_TX, // u16 sm
++
+ PIO_COUNT
+ };
+
+--- a/drivers/misc/rp1-pio.c
++++ b/drivers/misc/rp1-pio.c
+@@ -479,6 +479,28 @@ int rp1_pio_sm_set_dmactrl(struct rp1_pi
+ }
+ EXPORT_SYMBOL_GPL(rp1_pio_sm_set_dmactrl);
+
++int rp1_pio_sm_fifo_state(struct rp1_pio_client *client, void *param)
++{
++ struct rp1_pio_sm_fifo_state_args *args = param;
++ const int level_offset = offsetof(struct rp1_pio_sm_fifo_state_args, level);
++ int ret;
++
++ ret = rp1_pio_message_resp(client->pio, PIO_SM_FIFO_STATE, args, sizeof(*args),
++ &args->level, NULL, sizeof(*args) - level_offset);
++ if (ret >= 0)
++ return level_offset + ret;
++ return ret;
++}
++EXPORT_SYMBOL_GPL(rp1_pio_sm_fifo_state);
++
++int rp1_pio_sm_drain_tx(struct rp1_pio_client *client, void *param)
++{
++ struct rp1_pio_sm_clear_fifos_args *args = param;
++
++ return rp1_pio_message(client->pio, PIO_SM_DRAIN_TX, args, sizeof(*args));
++}
++EXPORT_SYMBOL_GPL(rp1_pio_sm_drain_tx);
++
+ int rp1_pio_gpio_init(struct rp1_pio_client *client, void *param)
+ {
+ struct rp1_gpio_init_args *args = param;
+@@ -851,6 +873,8 @@ struct handler_info {
+ HANDLER(SM_PUT, sm_put),
+ HANDLER(SM_GET, sm_get),
+ HANDLER(SM_SET_DMACTRL, sm_set_dmactrl),
++ HANDLER(SM_FIFO_STATE, sm_fifo_state),
++ HANDLER(SM_DRAIN_TX, sm_drain_tx),
+
+ HANDLER(GPIO_INIT, gpio_init),
+ HANDLER(GPIO_SET_FUNCTION, gpio_set_function),
+--- a/include/linux/pio_rp1.h
++++ b/include/linux/pio_rp1.h
+@@ -200,6 +200,8 @@ int rp1_pio_sm_enable_sync(struct rp1_pi
+ int rp1_pio_sm_put(struct rp1_pio_client *client, void *param);
+ int rp1_pio_sm_get(struct rp1_pio_client *client, void *param);
+ int rp1_pio_sm_set_dmactrl(struct rp1_pio_client *client, void *param);
++int rp1_pio_sm_fifo_state(struct rp1_pio_client *client, void *param);
++int rp1_pio_sm_drain_tx(struct rp1_pio_client *client, void *param);
+ int rp1_pio_gpio_init(struct rp1_pio_client *client, void *param);
+ int rp1_pio_gpio_set_function(struct rp1_pio_client *client, void *param);
+ int rp1_pio_gpio_set_pulls(struct rp1_pio_client *client, void *param);
+@@ -551,6 +553,15 @@ static inline int pio_sm_set_dmactrl(str
+ return rp1_pio_sm_set_dmactrl(client, &args);
+ };
+
++static inline int pio_sm_drain_tx_fifo(struct rp1_pio_client *client, uint sm)
++{
++ struct rp1_pio_sm_clear_fifos_args args = { .sm = sm };
++
++ if (bad_params_if(client, sm >= NUM_PIO_STATE_MACHINES))
++ return -EINVAL;
++ return rp1_pio_sm_drain_tx(client, &args);
++};
++
+ static inline int pio_sm_put(struct rp1_pio_client *client, uint sm, uint32_t data)
+ {
+ struct rp1_pio_sm_put_args args = { .sm = (uint16_t)sm, .blocking = false, .data = data };
+@@ -587,6 +598,84 @@ static inline uint32_t pio_sm_get_blocki
+ return args.data;
+ }
+
++static inline int pio_sm_is_rx_fifo_empty(struct rp1_pio_client *client, uint sm)
++{
++ struct rp1_pio_sm_fifo_state_args args = { .sm = sm, .tx = false };
++ int ret;
++
++ if (bad_params_if(client, sm >= NUM_PIO_STATE_MACHINES))
++ return -EINVAL;
++ ret = rp1_pio_sm_fifo_state(client, &args);
++ if (ret == sizeof(args))
++ ret = args.empty;
++ return ret;
++};
++
++static inline int pio_sm_is_rx_fifo_full(struct rp1_pio_client *client, uint sm)
++{
++ struct rp1_pio_sm_fifo_state_args args = { .sm = sm, .tx = false };
++ int ret;
++
++ if (bad_params_if(client, sm >= NUM_PIO_STATE_MACHINES))
++ return -EINVAL;
++ ret = rp1_pio_sm_fifo_state(client, &args);
++ if (ret == sizeof(args))
++ ret = args.full;
++ return ret;
++};
++
++static inline int pio_sm_rx_fifo_level(struct rp1_pio_client *client, uint sm)
++{
++ struct rp1_pio_sm_fifo_state_args args = { .sm = sm, .tx = false };
++ int ret;
++
++ if (bad_params_if(client, sm >= NUM_PIO_STATE_MACHINES))
++ return -EINVAL;
++ ret = rp1_pio_sm_fifo_state(client, &args);
++ if (ret == sizeof(args))
++ ret = args.level;
++ return ret;
++};
++
++static inline int pio_sm_is_tx_fifo_empty(struct rp1_pio_client *client, uint sm)
++{
++ struct rp1_pio_sm_fifo_state_args args = { .sm = sm, .tx = true };
++ int ret;
++
++ if (bad_params_if(client, sm >= NUM_PIO_STATE_MACHINES))
++ return -EINVAL;
++ ret = rp1_pio_sm_fifo_state(client, &args);
++ if (ret == sizeof(args))
++ ret = args.empty;
++ return ret;
++};
++
++static inline int pio_sm_is_tx_fifo_full(struct rp1_pio_client *client, uint sm)
++{
++ struct rp1_pio_sm_fifo_state_args args = { .sm = sm, .tx = true };
++ int ret;
++
++ if (bad_params_if(client, sm >= NUM_PIO_STATE_MACHINES))
++ return -EINVAL;
++ ret = rp1_pio_sm_fifo_state(client, &args);
++ if (ret == sizeof(args))
++ ret = args.full;
++ return ret;
++};
++
++static inline int pio_sm_tx_fifo_level(struct rp1_pio_client *client, uint sm)
++{
++ struct rp1_pio_sm_fifo_state_args args = { .sm = sm, .tx = true };
++ int ret;
++
++ if (bad_params_if(client, sm >= NUM_PIO_STATE_MACHINES))
++ return -EINVAL;
++ ret = rp1_pio_sm_fifo_state(client, &args);
++ if (ret == sizeof(args))
++ ret = args.level;
++ return ret;
++};
++
+ static inline void sm_config_set_out_pins(pio_sm_config *c, uint out_base, uint out_count)
+ {
+ if (bad_params_if(NULL, out_base >= RP1_PIO_GPIO_COUNT ||
+--- a/include/uapi/misc/rp1_pio_if.h
++++ b/include/uapi/misc/rp1_pio_if.h
+@@ -114,7 +114,7 @@ struct rp1_pio_sm_get_args {
+ uint16_t sm;
+ uint8_t blocking;
+ uint8_t rsvd;
+- uint32_t data; /* IN/OUT */
++ uint32_t data; /* OUT */
+ };
+
+ struct rp1_pio_sm_set_dmactrl_args {
+@@ -124,6 +124,15 @@ struct rp1_pio_sm_set_dmactrl_args {
+ uint32_t ctrl;
+ };
+
++struct rp1_pio_sm_fifo_state_args {
++ uint16_t sm;
++ uint8_t tx;
++ uint8_t rsvd;
++ uint16_t level; /* OUT */
++ uint8_t empty; /* OUT */
++ uint8_t full; /* OUT */
++};
++
+ struct rp1_gpio_init_args {
+ uint16_t gpio;
+ };
+@@ -195,6 +204,8 @@ struct rp1_access_hw_args {
+ #define PIO_IOC_SM_PUT _IOW(PIO_IOC_MAGIC, 41, struct rp1_pio_sm_put_args)
+ #define PIO_IOC_SM_GET _IOWR(PIO_IOC_MAGIC, 42, struct rp1_pio_sm_get_args)
+ #define PIO_IOC_SM_SET_DMACTRL _IOW(PIO_IOC_MAGIC, 43, struct rp1_pio_sm_set_dmactrl_args)
++#define PIO_IOC_SM_FIFO_STATE _IOW(PIO_IOC_MAGIC, 44, struct rp1_pio_sm_fifo_state_args)
++#define PIO_IOC_SM_DRAIN_TX _IOW(PIO_IOC_MAGIC, 45, struct rp1_pio_sm_clear_fifos_args)
+
+ #define PIO_IOC_GPIO_INIT _IOW(PIO_IOC_MAGIC, 50, struct rp1_gpio_init_args)
+ #define PIO_IOC_GPIO_SET_FUNCTION _IOW(PIO_IOC_MAGIC, 51, struct rp1_gpio_set_function_args)
diff --git a/target/linux/bcm27xx/patches-6.6/950-1360-misc-rp1-pio-Fix-parameter-checks-wihout-client.patch b/target/linux/bcm27xx/patches-6.6/950-1360-misc-rp1-pio-Fix-parameter-checks-wihout-client.patch
new file mode 100644
index 0000000000..e68bd175d8
--- /dev/null
+++ b/target/linux/bcm27xx/patches-6.6/950-1360-misc-rp1-pio-Fix-parameter-checks-wihout-client.patch
@@ -0,0 +1,25 @@
+From 3687701e8d252864f440f91f1aedf8ffd58d6ee6 Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil at raspberrypi.com>
+Date: Mon, 25 Nov 2024 21:51:13 +0000
+Subject: [PATCH] misc: rp1-pio: Fix parameter checks wihout client
+
+Passing bad parameters to an API call without a pio pointer will cause
+a NULL pointer exception when the persistent error is set. Guard
+against that.
+
+Signed-off-by: Phil Elwell <phil at raspberrypi.com>
+---
+ include/linux/pio_rp1.h | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/include/linux/pio_rp1.h
++++ b/include/linux/pio_rp1.h
+@@ -20,7 +20,7 @@
+ #endif
+
+ #define bad_params_if(client, test) \
+- ({ bool f = (test); if (f) pio_set_error(client, -EINVAL); \
++ ({ bool f = (test); if (f && client) pio_set_error(client, -EINVAL); \
+ if (f && PARAM_WARNINGS_ENABLED) WARN_ON((test)); \
+ f; })
+
diff --git a/target/linux/bcm27xx/patches-6.6/950-1394-misc-rp1-pio-Add-compat_ioctl-method.patch b/target/linux/bcm27xx/patches-6.6/950-1394-misc-rp1-pio-Add-compat_ioctl-method.patch
new file mode 100644
index 0000000000..bffa2418a1
--- /dev/null
+++ b/target/linux/bcm27xx/patches-6.6/950-1394-misc-rp1-pio-Add-compat_ioctl-method.patch
@@ -0,0 +1,91 @@
+From b4472d09b1ffdafd8132803ffbec62596e559fd8 Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil at raspberrypi.com>
+Date: Mon, 18 Nov 2024 09:10:52 +0000
+Subject: [PATCH 1394/1482] misc: rp1-pio: Add compat_ioctl method
+
+Provide a compat_ioctl method, to support running a 64-bit kernel with
+a 32-bit userland.
+
+Signed-off-by: Phil Elwell <phil at raspberrypi.com>
+---
+ drivers/misc/rp1-pio.c | 64 ++++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 64 insertions(+)
+
+--- a/drivers/misc/rp1-pio.c
++++ b/drivers/misc/rp1-pio.c
+@@ -1023,11 +1023,75 @@ static long rp1_pio_ioctl(struct file *f
+ return ret;
+ }
+
++#ifdef CONFIG_COMPAT
++
++struct rp1_pio_sm_xfer_data_args_compat {
++ uint16_t sm;
++ uint16_t dir;
++ uint16_t data_bytes;
++ compat_uptr_t data;
++};
++
++struct rp1_access_hw_args_compat {
++ uint32_t addr;
++ uint32_t len;
++ compat_uptr_t data;
++};
++
++#define PIO_IOC_SM_XFER_DATA_COMPAT _IOW(PIO_IOC_MAGIC, 1, struct rp1_pio_sm_xfer_data_args_compat)
++#define PIO_IOC_READ_HW_COMPAT _IOW(PIO_IOC_MAGIC, 8, struct rp1_access_hw_args_compat)
++#define PIO_IOC_WRITE_HW_COMPAT _IOW(PIO_IOC_MAGIC, 9, struct rp1_access_hw_args_compat)
++
++static long rp1_pio_compat_ioctl(struct file *filp, unsigned int ioctl_num,
++ unsigned long ioctl_param)
++{
++ struct rp1_pio_client *client = filp->private_data;
++
++ switch (ioctl_num) {
++ case PIO_IOC_SM_XFER_DATA_COMPAT:
++ {
++ struct rp1_pio_sm_xfer_data_args_compat compat_param;
++ struct rp1_pio_sm_xfer_data_args param;
++
++ if (copy_from_user(&compat_param, compat_ptr(ioctl_param), sizeof(compat_param)))
++ return -EFAULT;
++ param.sm = compat_param.sm;
++ param.dir = compat_param.dir;
++ param.data_bytes = compat_param.data_bytes;
++ param.data = compat_ptr(compat_param.data);
++ return rp1_pio_sm_xfer_data(client, ¶m);
++ }
++
++ case PIO_IOC_READ_HW_COMPAT:
++ case PIO_IOC_WRITE_HW_COMPAT:
++ {
++ struct rp1_access_hw_args_compat compat_param;
++ struct rp1_access_hw_args param;
++
++ if (copy_from_user(&compat_param, compat_ptr(ioctl_param), sizeof(compat_param)))
++ return -EFAULT;
++ param.addr = compat_param.addr;
++ param.len = compat_param.len;
++ param.data = compat_ptr(compat_param.data);
++ if (ioctl_num == PIO_IOC_READ_HW_COMPAT)
++ return rp1_pio_read_hw(client, ¶m);
++ else
++ return rp1_pio_write_hw(client, ¶m);
++ }
++ default:
++ return rp1_pio_ioctl(filp, ioctl_num, ioctl_param);
++ }
++}
++#else
++#define rp1_pio_compat_ioctl NULL
++#endif
++
+ const struct file_operations rp1_pio_fops = {
+ .owner = THIS_MODULE,
+ .open = rp1_pio_open,
+ .release = rp1_pio_release,
+ .unlocked_ioctl = rp1_pio_ioctl,
++ .compat_ioctl = rp1_pio_compat_ioctl,
+ };
+
+ static int rp1_pio_probe(struct platform_device *pdev)
diff --git a/target/linux/bcm27xx/patches-6.6/950-1423-net-macb-Add-support-for-Raspberry-Pi-RP1-ethernet-c.patch b/target/linux/bcm27xx/patches-6.6/950-1423-net-macb-Add-support-for-Raspberry-Pi-RP1-ethernet-c.patch
new file mode 100644
index 0000000000..3941d69edf
--- /dev/null
+++ b/target/linux/bcm27xx/patches-6.6/950-1423-net-macb-Add-support-for-Raspberry-Pi-RP1-ethernet-c.patch
@@ -0,0 +1,43 @@
+From f9f0024bd9bf04a58b64bae356be4c04022d23bc Mon Sep 17 00:00:00 2001
+From: Dave Stevenson <dave.stevenson at raspberrypi.com>
+Date: Mon, 11 Nov 2024 16:40:07 +0000
+Subject: [PATCH 1423/1482] net: macb: Add support for Raspberry Pi RP1
+ ethernet controller
+
+The RP1 chip has the Cadence GEM block, but wants the tx_clock
+to always run at 125MHz, in the same way as sama7g5.
+Add the relevant configuration.
+
+Signed-off-by: Dave Stevenson <dave.stevenson at raspberrypi.com>
+---
+ drivers/net/ethernet/cadence/macb_main.c | 12 ++++++++++++
+ 1 file changed, 12 insertions(+)
+
+--- a/drivers/net/ethernet/cadence/macb_main.c
++++ b/drivers/net/ethernet/cadence/macb_main.c
+@@ -5023,6 +5023,17 @@ static const struct macb_config versal_c
+ .usrio = &macb_default_usrio,
+ };
+
++static const struct macb_config raspberrypi_rp1_config = {
++ .caps = MACB_CAPS_GIGABIT_MODE_AVAILABLE | MACB_CAPS_CLK_HW_CHG |
++ MACB_CAPS_JUMBO |
++ MACB_CAPS_GEM_HAS_PTP,
++ .dma_burst_length = 16,
++ .clk_init = macb_clk_init,
++ .init = macb_init,
++ .usrio = &macb_default_usrio,
++ .jumbo_max_len = 10240,
++};
++
+ static const struct of_device_id macb_dt_ids[] = {
+ { .compatible = "cdns,at91sam9260-macb", .data = &at91sam9260_config },
+ { .compatible = "cdns,macb" },
+@@ -5043,6 +5054,7 @@ static const struct of_device_id macb_dt
+ { .compatible = "microchip,mpfs-macb", .data = &mpfs_config },
+ { .compatible = "microchip,sama7g5-gem", .data = &sama7g5_gem_config },
+ { .compatible = "microchip,sama7g5-emac", .data = &sama7g5_emac_config },
++ { .compatible = "raspberrypi,rp1-gem", .data = &raspberrypi_rp1_config },
+ { .compatible = "xlnx,zynqmp-gem", .data = &zynqmp_config},
+ { .compatible = "xlnx,zynq-gem", .data = &zynq_config },
+ { .compatible = "xlnx,versal-gem", .data = &versal_config},
diff --git a/target/linux/bcm27xx/patches-6.6/950-1424-rp1-clk-Only-set-PLL_SEC_RST-in-rp1_pll_divider_off.patch b/target/linux/bcm27xx/patches-6.6/950-1424-rp1-clk-Only-set-PLL_SEC_RST-in-rp1_pll_divider_off.patch
new file mode 100644
index 0000000000..d3f216d31d
--- /dev/null
+++ b/target/linux/bcm27xx/patches-6.6/950-1424-rp1-clk-Only-set-PLL_SEC_RST-in-rp1_pll_divider_off.patch
@@ -0,0 +1,27 @@
+From 33c225f622d596034a9261316666089a92aa6834 Mon Sep 17 00:00:00 2001
+From: Dave Stevenson <dave.stevenson at raspberrypi.com>
+Date: Mon, 25 Nov 2024 12:30:06 +0000
+Subject: [PATCH 1424/1482] rp1: clk: Only set PLL_SEC_RST in
+ rp1_pll_divider_off
+
+Rather than clearing all the bits in rp1_pll_divider_off
+and setting PLL_SEC_RST, retain the status of all the other
+bits.
+
+Signed-off-by: Dave Stevenson <dave.stevenson at raspberrypi.com>
+---
+ drivers/clk/clk-rp1.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+--- a/drivers/clk/clk-rp1.c
++++ b/drivers/clk/clk-rp1.c
+@@ -927,7 +927,8 @@ static void rp1_pll_divider_off(struct c
+ const struct rp1_pll_data *data = divider->data;
+
+ spin_lock(&clockman->regs_lock);
+- clockman_write(clockman, data->ctrl_reg, PLL_SEC_RST);
++ clockman_write(clockman, data->ctrl_reg,
++ clockman_read(clockman, data->ctrl_reg) | PLL_SEC_RST);
+ spin_unlock(&clockman->regs_lock);
+ }
+
diff --git a/target/linux/bcm27xx/patches-6.6/950-1425-rp1-clk-Rationalise-the-use-of-the-CLK_IS_CRITICAL-f.patch b/target/linux/bcm27xx/patches-6.6/950-1425-rp1-clk-Rationalise-the-use-of-the-CLK_IS_CRITICAL-f.patch
new file mode 100644
index 0000000000..247ae455ac
--- /dev/null
+++ b/target/linux/bcm27xx/patches-6.6/950-1425-rp1-clk-Rationalise-the-use-of-the-CLK_IS_CRITICAL-f.patch
@@ -0,0 +1,124 @@
+From eb836a6a299322a8e2b9627cccd23c7a76d068ba Mon Sep 17 00:00:00 2001
+From: Dave Stevenson <dave.stevenson at raspberrypi.com>
+Date: Fri, 8 Nov 2024 17:36:13 +0000
+Subject: [PATCH 1425/1482] rp1: clk: Rationalise the use of the
+ CLK_IS_CRITICAL flag
+
+The clock setup had been copied from clk-bcm2835 which had to cope
+with the firmware having configured clocks, so there were flags
+of CLK_IS_CRITICAL and CLK_IGNORE_UNUSED dotted around.
+
+That isn't the situation with RP1 where only the main PLLs, CLK_SYS,
+and CLK_SLOW_SYS are critical, so update the configuration to match.
+
+Signed-off-by: Dave Stevenson <dave.stevenson at raspberrypi.com>
+---
+ drivers/clk/clk-rp1.c | 41 ++++++-----------------------------------
+ 1 file changed, 6 insertions(+), 35 deletions(-)
+
+--- a/drivers/clk/clk-rp1.c
++++ b/drivers/clk/clk-rp1.c
+@@ -1504,8 +1504,6 @@ static const struct clk_ops rp1_varsrc_o
+ .round_rate = rp1_varsrc_round_rate,
+ };
+
+-static bool rp1_clk_is_claimed(const char *name);
+-
+ static struct clk_hw *rp1_register_pll_core(struct rp1_clockman *clockman,
+ const void *data)
+ {
+@@ -1521,7 +1519,7 @@ static struct clk_hw *rp1_register_pll_c
+ init.num_parents = 1;
+ init.name = pll_core_data->name;
+ init.ops = &rp1_pll_core_ops;
+- init.flags = pll_core_data->flags | CLK_IGNORE_UNUSED | CLK_IS_CRITICAL;
++ init.flags = pll_core_data->flags | CLK_IS_CRITICAL;
+
+ pll_core = kzalloc(sizeof(*pll_core), GFP_KERNEL);
+ if (!pll_core)
+@@ -1554,7 +1552,7 @@ static struct clk_hw *rp1_register_pll(s
+ init.num_parents = 1;
+ init.name = pll_data->name;
+ init.ops = &rp1_pll_ops;
+- init.flags = pll_data->flags | CLK_IGNORE_UNUSED | CLK_IS_CRITICAL;
++ init.flags = pll_data->flags | CLK_IGNORE_UNUSED;
+
+ pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+ if (!pll)
+@@ -1635,11 +1633,6 @@ static struct clk_hw *rp1_register_pll_d
+ divider->div.hw.init = &init;
+ divider->div.table = pll_sec_div_table;
+
+- if (!rp1_clk_is_claimed(divider_data->source_pll))
+- init.flags |= CLK_IS_CRITICAL;
+- if (!rp1_clk_is_claimed(divider_data->name))
+- divider->div.flags |= CLK_IS_CRITICAL;
+-
+ divider->clockman = clockman;
+ divider->data = divider_data;
+
+@@ -1861,6 +1854,8 @@ static const struct rp1_clk_desc clk_des
+ .max_freq = 200 * MHz,
+ .fc0_src = FC_NUM(0, 4),
+ .clk_src_mask = 0x3,
++ /* Always enabled in hardware */
++ .flags = CLK_IS_CRITICAL,
+ ),
+
+ [RP1_CLK_SLOW_SYS] = REGISTER_CLK(
+@@ -1875,6 +1870,8 @@ static const struct rp1_clk_desc clk_des
+ .max_freq = 50 * MHz,
+ .fc0_src = FC_NUM(1, 4),
+ .clk_src_mask = 0x1,
++ /* Always enabled in hardware */
++ .flags = CLK_IS_CRITICAL,
+ ),
+
+ [RP1_CLK_UART] = REGISTER_CLK(
+@@ -2394,24 +2391,6 @@ static const struct rp1_clk_desc clk_des
+ [RP1_CLK_MIPI1_DSI_BYTECLOCK] = REGISTER_VARSRC("clksrc_mipi1_dsi_byteclk"),
+ };
+
+-static bool rp1_clk_claimed[ARRAY_SIZE(clk_desc_array)];
+-
+-static bool rp1_clk_is_claimed(const char *name)
+-{
+- unsigned int i;
+-
+- for (i = 0; i < ARRAY_SIZE(clk_desc_array); i++) {
+- if (clk_desc_array[i].data) {
+- const char *clk_name = *(const char **)(clk_desc_array[i].data);
+-
+- if (!strcmp(name, clk_name))
+- return rp1_clk_claimed[i];
+- }
+- }
+-
+- return false;
+-}
+-
+ static int rp1_clk_probe(struct platform_device *pdev)
+ {
+ const struct rp1_clk_desc *desc;
+@@ -2422,7 +2401,6 @@ static int rp1_clk_probe(struct platform
+ const size_t asize = ARRAY_SIZE(clk_desc_array);
+ u32 chip_id, platform;
+ unsigned int i;
+- u32 clk_id;
+ int ret;
+
+ clockman = devm_kzalloc(dev, struct_size(clockman, onecell.hws, asize),
+@@ -2439,13 +2417,6 @@ static int rp1_clk_probe(struct platform
+ if (IS_ERR(clockman->regs))
+ return PTR_ERR(clockman->regs);
+
+- memset(rp1_clk_claimed, 0, sizeof(rp1_clk_claimed));
+- for (i = 0;
+- !of_property_read_u32_index(pdev->dev.of_node, "claim-clocks",
+- i, &clk_id);
+- i++)
+- rp1_clk_claimed[clk_id] = true;
+-
+ platform_set_drvdata(pdev, clockman);
+
+ clockman->onecell.num = asize;
diff --git a/target/linux/bcm27xx/patches-6.6/950-1426-dt-arm64-Fixup-RP1-ethernet-DT-configuration.patch b/target/linux/bcm27xx/patches-6.6/950-1426-dt-arm64-Fixup-RP1-ethernet-DT-configuration.patch
new file mode 100644
index 0000000000..ad6569e99c
--- /dev/null
+++ b/target/linux/bcm27xx/patches-6.6/950-1426-dt-arm64-Fixup-RP1-ethernet-DT-configuration.patch
@@ -0,0 +1,50 @@
+From 0b4af929b7125abd3a262577b380c7c81ee9b1c5 Mon Sep 17 00:00:00 2001
+From: Dave Stevenson <dave.stevenson at raspberrypi.com>
+Date: Mon, 11 Nov 2024 15:18:14 +0000
+Subject: [PATCH 1426/1482] dt: arm64: Fixup RP1 ethernet DT configuration
+
+Configure RP1's ethernet block to do the correct thing.
+clk_eth is intended to be fixed at 125MHz, so use a new compatible,
+and use assigned-clocks to configure the clock appropriately.
+
+Signed-off-by: Dave Stevenson <dave.stevenson at raspberrypi.com>
+---
+ arch/arm64/boot/dts/broadcom/rp1.dtsi | 10 +++++++---
+ 1 file changed, 7 insertions(+), 3 deletions(-)
+
+--- a/arch/arm64/boot/dts/broadcom/rp1.dtsi
++++ b/arch/arm64/boot/dts/broadcom/rp1.dtsi
+@@ -24,6 +24,7 @@
+ // RP1_PLL_VIDEO_CORE and dividers are now managed by VEC,DPI drivers
+ <&rp1_clocks RP1_PLL_SYS>,
+ <&rp1_clocks RP1_PLL_SYS_SEC>,
++ <&rp1_clocks RP1_CLK_ETH>,
+ <&rp1_clocks RP1_PLL_AUDIO>,
+ <&rp1_clocks RP1_PLL_AUDIO_SEC>,
+ <&rp1_clocks RP1_CLK_SYS>,
+@@ -38,6 +39,7 @@
+ <1536000000>, // RP1_PLL_AUDIO_CORE
+ <200000000>, // RP1_PLL_SYS
+ <125000000>, // RP1_PLL_SYS_SEC
++ <125000000>, // RP1_CLK_ETH
+ <61440000>, // RP1_PLL_AUDIO
+ <192000000>, // RP1_PLL_AUDIO_SEC
+ <200000000>, // RP1_CLK_SYS
+@@ -968,12 +970,14 @@
+
+ rp1_eth: ethernet at 100000 {
+ reg = <0xc0 0x40100000 0x0 0x4000>;
+- compatible = "cdns,macb";
++ compatible = "raspberrypi,rp1-gem", "cdns,macb";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <RP1_INT_ETH IRQ_TYPE_LEVEL_HIGH>;
+- clocks = <&macb_pclk &macb_hclk &rp1_clocks RP1_CLK_ETH_TSU>;
+- clock-names = "pclk", "hclk", "tsu_clk";
++ clocks = <&macb_pclk &macb_hclk
++ &rp1_clocks RP1_CLK_ETH_TSU
++ &rp1_clocks RP1_CLK_ETH>;
++ clock-names = "pclk", "hclk", "tsu_clk", "tx_clk";
+ phy-mode = "rgmii-id";
+ cdns,aw2w-max-pipe = /bits/ 8 <8>;
+ cdns,ar2r-max-pipe = /bits/ 8 <8>;
diff --git a/target/linux/bcm27xx/patches-6.6/950-1427-clk-rp1-Add-RP1_CLK_DMA.patch b/target/linux/bcm27xx/patches-6.6/950-1427-clk-rp1-Add-RP1_CLK_DMA.patch
new file mode 100644
index 0000000000..9026cebaf9
--- /dev/null
+++ b/target/linux/bcm27xx/patches-6.6/950-1427-clk-rp1-Add-RP1_CLK_DMA.patch
@@ -0,0 +1,44 @@
+From d4e41ed9954fa86c4774f98d393aa401c81a68e7 Mon Sep 17 00:00:00 2001
+From: Dave Stevenson <dave.stevenson at raspberrypi.com>
+Date: Wed, 13 Nov 2024 13:10:27 +0000
+Subject: [PATCH 1427/1482] clk: rp1: Add RP1_CLK_DMA.
+
+The DMA block has a clock, but wasn't defined in the driver. This
+resulted in the parent being disabled as unused, and then DMA
+stopped working.
+
+Signed-off-by: Dave Stevenson <dave.stevenson at raspberrypi.com>
+---
+ drivers/clk/clk-rp1.c | 21 +++++++++++++++++++++
+ 1 file changed, 21 insertions(+)
+
+--- a/drivers/clk/clk-rp1.c
++++ b/drivers/clk/clk-rp1.c
+@@ -1874,6 +1874,27 @@ static const struct rp1_clk_desc clk_des
+ .flags = CLK_IS_CRITICAL,
+ ),
+
++ [RP1_CLK_DMA] = REGISTER_CLK(
++ .name = "clk_dma",
++ .parents = {"pll_sys_pri_ph",
++ "pll_video",
++ "xosc",
++ "clksrc_gp0",
++ "clksrc_gp1",
++ "clksrc_gp2",
++ "clksrc_gp3",
++ "clksrc_gp4",
++ "clksrc_gp5"},
++ .num_std_parents = 0,
++ .num_aux_parents = 9,
++ .ctrl_reg = CLK_DMA_CTRL,
++ .div_int_reg = CLK_DMA_DIV_INT,
++ .sel_reg = CLK_DMA_SEL,
++ .div_int_max = DIV_INT_8BIT_MAX,
++ .max_freq = 100 * MHz,
++ .fc0_src = FC_NUM(2, 2),
++ ),
++
+ [RP1_CLK_UART] = REGISTER_CLK(
+ .name = "clk_uart",
+ .parents = {"pll_sys_pri_ph",
diff --git a/target/linux/bcm27xx/patches-6.6/950-1428-rp1-clk-Remove-CLK_IGNORE_UNUSED-flags.patch b/target/linux/bcm27xx/patches-6.6/950-1428-rp1-clk-Remove-CLK_IGNORE_UNUSED-flags.patch
new file mode 100644
index 0000000000..8fa06045a5
--- /dev/null
+++ b/target/linux/bcm27xx/patches-6.6/950-1428-rp1-clk-Remove-CLK_IGNORE_UNUSED-flags.patch
@@ -0,0 +1,59 @@
+From 9049e4df2c54b5e620f855f66db3a18c9f2e181f Mon Sep 17 00:00:00 2001
+From: Dave Stevenson <dave.stevenson at raspberrypi.com>
+Date: Fri, 8 Nov 2024 17:37:08 +0000
+Subject: [PATCH 1428/1482] rp1: clk: Remove CLK_IGNORE_UNUSED flags
+
+There should be no issue in disabling the RP1 clocks as long as
+the kernel knows about all consumers.
+
+Signed-off-by: Dave Stevenson <dave.stevenson at raspberrypi.com>
+---
+ drivers/clk/clk-rp1.c | 9 ++++-----
+ 1 file changed, 4 insertions(+), 5 deletions(-)
+
+--- a/drivers/clk/clk-rp1.c
++++ b/drivers/clk/clk-rp1.c
+@@ -1552,7 +1552,7 @@ static struct clk_hw *rp1_register_pll(s
+ init.num_parents = 1;
+ init.name = pll_data->name;
+ init.ops = &rp1_pll_ops;
+- init.flags = pll_data->flags | CLK_IGNORE_UNUSED;
++ init.flags = pll_data->flags;
+
+ pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+ if (!pll)
+@@ -1586,7 +1586,7 @@ static struct clk_hw *rp1_register_pll_p
+ init.num_parents = 1;
+ init.name = ph_data->name;
+ init.ops = &rp1_pll_ph_ops;
+- init.flags = ph_data->flags | CLK_IGNORE_UNUSED;
++ init.flags = ph_data->flags;
+
+ ph = kzalloc(sizeof(*ph), GFP_KERNEL);
+ if (!ph)
+@@ -1619,7 +1619,7 @@ static struct clk_hw *rp1_register_pll_d
+ init.num_parents = 1;
+ init.name = divider_data->name;
+ init.ops = &rp1_pll_divider_ops;
+- init.flags = divider_data->flags | CLK_IGNORE_UNUSED;
++ init.flags = divider_data->flags;
+
+ divider = devm_kzalloc(clockman->dev, sizeof(*divider), GFP_KERNEL);
+ if (!divider)
+@@ -1662,7 +1662,7 @@ static struct clk_hw *rp1_register_clock
+ init.num_parents =
+ clock_data->num_std_parents + clock_data->num_aux_parents;
+ init.name = clock_data->name;
+- init.flags = clock_data->flags | CLK_IGNORE_UNUSED;
++ init.flags = clock_data->flags;
+ init.ops = &rp1_clk_ops;
+
+ clock = devm_kzalloc(clockman->dev, sizeof(*clock), GFP_KERNEL);
+@@ -1692,7 +1692,6 @@ static struct clk_hw *rp1_register_varsr
+ init.parent_names = &ref_clock;
+ init.num_parents = 1;
+ init.name = name;
+- init.flags = CLK_IGNORE_UNUSED;
+ init.ops = &rp1_varsrc_ops;
+
+ clock = devm_kzalloc(clockman->dev, sizeof(*clock), GFP_KERNEL);
diff --git a/target/linux/bcm27xx/patches-6.6/950-1429-dt-rp1-Use-clk_sys-for-ethernet-hclk-and-pclk.patch b/target/linux/bcm27xx/patches-6.6/950-1429-dt-rp1-Use-clk_sys-for-ethernet-hclk-and-pclk.patch
new file mode 100644
index 0000000000..6d0eb13389
--- /dev/null
+++ b/target/linux/bcm27xx/patches-6.6/950-1429-dt-rp1-Use-clk_sys-for-ethernet-hclk-and-pclk.patch
@@ -0,0 +1,45 @@
+From 542d0f7f2e9f90fc0f02f8cb141f7c3fbf46081b Mon Sep 17 00:00:00 2001
+From: Dave Stevenson <dave.stevenson at raspberrypi.com>
+Date: Mon, 11 Nov 2024 17:11:18 +0000
+Subject: [PATCH 1429/1482] dt: rp1: Use clk_sys for ethernet hclk and pclk
+
+hclk and pclk of the MAC are connected to clk_sys, so define
+them as being connected accordingly, rather than having fake
+fixed clocks for them.
+
+Signed-off-by: Dave Stevenson <dave.stevenson at raspberrypi.com>
+---
+ arch/arm64/boot/dts/broadcom/rp1.dtsi | 15 ++-------------
+ 1 file changed, 2 insertions(+), 13 deletions(-)
+
+--- a/arch/arm64/boot/dts/broadcom/rp1.dtsi
++++ b/arch/arm64/boot/dts/broadcom/rp1.dtsi
+@@ -974,7 +974,8 @@
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <RP1_INT_ETH IRQ_TYPE_LEVEL_HIGH>;
+- clocks = <&macb_pclk &macb_hclk
++ clocks = <&rp1_clocks RP1_CLK_SYS
++ &rp1_clocks RP1_CLK_SYS
+ &rp1_clocks RP1_CLK_ETH_TSU
+ &rp1_clocks RP1_CLK_ETH>;
+ clock-names = "pclk", "hclk", "tsu_clk", "tx_clk";
+@@ -1195,18 +1196,6 @@
+ clock-output-names = "xosc";
+ clock-frequency = <50000000>;
+ };
+- macb_pclk: macb_pclk {
+- compatible = "fixed-clock";
+- #clock-cells = <0>;
+- clock-output-names = "pclk";
+- clock-frequency = <200000000>;
+- };
+- macb_hclk: macb_hclk {
+- compatible = "fixed-clock";
+- #clock-cells = <0>;
+- clock-output-names = "hclk";
+- clock-frequency = <200000000>;
+- };
+ sdio_src: sdio_src {
+ // 400 MHz on FPGA. PLL sys VCO on asic
+ compatible = "fixed-clock";
diff --git a/target/linux/bcm27xx/patches-6.6/950-1430-dt-rp1-Link-RP1-DMA-to-the-associated-clock.patch b/target/linux/bcm27xx/patches-6.6/950-1430-dt-rp1-Link-RP1-DMA-to-the-associated-clock.patch
new file mode 100644
index 0000000000..36d4f8b723
--- /dev/null
+++ b/target/linux/bcm27xx/patches-6.6/950-1430-dt-rp1-Link-RP1-DMA-to-the-associated-clock.patch
@@ -0,0 +1,24 @@
+From efecbda4014b490e042c7fd090942b32316f9345 Mon Sep 17 00:00:00 2001
+From: Dave Stevenson <dave.stevenson at raspberrypi.com>
+Date: Wed, 13 Nov 2024 13:11:33 +0000
+Subject: [PATCH 1430/1482] dt: rp1: Link RP1 DMA to the associated clock
+
+This makes the kernel representation of the clock structure
+match reality.
+
+Signed-off-by: Dave Stevenson <dave.stevenson at raspberrypi.com>
+---
+ arch/arm64/boot/dts/broadcom/rp1.dtsi | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/arm64/boot/dts/broadcom/rp1.dtsi
++++ b/arch/arm64/boot/dts/broadcom/rp1.dtsi
+@@ -1061,7 +1061,7 @@
+ reg = <0xc0 0x40188000 0x0 0x1000>;
+ compatible = "snps,axi-dma-1.01a";
+ interrupts = <RP1_INT_DMA IRQ_TYPE_LEVEL_HIGH>;
+- clocks = <&sdhci_core &rp1_clocks RP1_CLK_SYS>;
++ clocks = <&rp1_clocks RP1_CLK_DMA &rp1_clocks RP1_CLK_SYS>;
+ clock-names = "core-clk", "cfgr-clk";
+
+ #dma-cells = <1>;
diff --git a/target/linux/bcm27xx/patches-6.6/950-1456-drm-rp1-rp1-dpi-Add-interlaced-modes-and-PIO-program.patch b/target/linux/bcm27xx/patches-6.6/950-1456-drm-rp1-rp1-dpi-Add-interlaced-modes-and-PIO-program.patch
new file mode 100644
index 0000000000..bbaee270c5
--- /dev/null
+++ b/target/linux/bcm27xx/patches-6.6/950-1456-drm-rp1-rp1-dpi-Add-interlaced-modes-and-PIO-program.patch
@@ -0,0 +1,762 @@
+From 7735dd0736322cff23aff95490bae1d69937a9bf Mon Sep 17 00:00:00 2001
+From: Nick Hollinghurst <nick.hollinghurst at raspberrypi.com>
+Date: Tue, 10 Dec 2024 13:23:09 +0000
+Subject: [PATCH 1456/1482] drm: rp1: rp1-dpi: Add interlaced modes and PIO
+ program to fix VSYNC
+
+Implement interlaced modes by wobbling the base pointer and VFP width
+for every field. This results in correct pixels but incorrect VSYNC.
+
+Now use PIO to generate a fixed-up VSYNC by sampling DE and HSYNC.
+This requires DPI's DE output to be mapped to GPIO1, which we check.
+
+When DE is not exposed, the internal fixup is disabled. VSYNC/GPIO2
+becomes a modified signal, designed to help an external device or
+PIO program synthesize CSYNC or VSYNC.
+
+Signed-off-by: Nick Hollinghurst <nick.hollinghurst at raspberrypi.com>
+---
+ drivers/gpu/drm/rp1/rp1-dpi/Makefile | 2 +-
+ drivers/gpu/drm/rp1/rp1-dpi/rp1_dpi.c | 34 ++-
+ drivers/gpu/drm/rp1/rp1-dpi/rp1_dpi.h | 18 ++
+ drivers/gpu/drm/rp1/rp1-dpi/rp1_dpi_hw.c | 253 ++++++++++++++++------
+ drivers/gpu/drm/rp1/rp1-dpi/rp1_dpi_pio.c | 225 +++++++++++++++++++
+ 5 files changed, 461 insertions(+), 71 deletions(-)
+ create mode 100644 drivers/gpu/drm/rp1/rp1-dpi/rp1_dpi_pio.c
+
+--- a/drivers/gpu/drm/rp1/rp1-dpi/Makefile
++++ b/drivers/gpu/drm/rp1/rp1-dpi/Makefile
+@@ -1,5 +1,5 @@
+ # SPDX-License-Identifier: GPL-2.0-only
+
+-drm-rp1-dpi-y := rp1_dpi.o rp1_dpi_hw.o rp1_dpi_cfg.o
++drm-rp1-dpi-y := rp1_dpi.o rp1_dpi_hw.o rp1_dpi_cfg.o rp1_dpi_pio.o
+
+ obj-$(CONFIG_DRM_RP1_DPI) += drm-rp1-dpi.o
+--- a/drivers/gpu/drm/rp1/rp1-dpi/rp1_dpi.c
++++ b/drivers/gpu/drm/rp1/rp1-dpi/rp1_dpi.c
+@@ -80,6 +80,7 @@ static void rp1dpi_pipe_update(struct dr
+ if (dpi->dpi_running &&
+ fb->format->format != dpi->cur_fmt) {
+ rp1dpi_hw_stop(dpi);
++ rp1dpi_pio_stop(dpi);
+ dpi->dpi_running = false;
+ }
+ if (!dpi->dpi_running) {
+@@ -88,6 +89,7 @@ static void rp1dpi_pipe_update(struct dr
+ dpi->bus_fmt,
+ dpi->de_inv,
+ &pipe->crtc.state->mode);
++ rp1dpi_pio_start(dpi, &pipe->crtc.state->mode);
+ dpi->dpi_running = true;
+ }
+ dpi->cur_fmt = fb->format->format;
+@@ -187,6 +189,7 @@ static void rp1dpi_pipe_disable(struct d
+ drm_crtc_vblank_off(&pipe->crtc);
+ if (dpi->dpi_running) {
+ rp1dpi_hw_stop(dpi);
++ rp1dpi_pio_stop(dpi);
+ dpi->dpi_running = false;
+ }
+ clk_disable_unprepare(dpi->clocks[RP1DPI_CLK_DPI]);
+@@ -236,6 +239,7 @@ static void rp1dpi_stopall(struct drm_de
+ if (dpi->dpi_running || rp1dpi_hw_busy(dpi)) {
+ rp1dpi_hw_stop(dpi);
+ clk_disable_unprepare(dpi->clocks[RP1DPI_CLK_DPI]);
++ rp1dpi_pio_stop(dpi);
+ dpi->dpi_running = false;
+ }
+ rp1dpi_vidout_poweroff(dpi);
+@@ -273,7 +277,7 @@ static int rp1dpi_platform_probe(struct
+ struct rp1_dpi *dpi;
+ struct drm_bridge *bridge = NULL;
+ struct drm_panel *panel;
+- int i, ret;
++ int i, j, ret;
+
+ dev_info(dev, __func__);
+ ret = drm_of_find_panel_or_bridge(pdev->dev.of_node, 0, 0,
+@@ -295,6 +299,7 @@ static int rp1dpi_platform_probe(struct
+ return ret;
+ }
+ dpi->pdev = pdev;
++ spin_lock_init(&dpi->hw_lock);
+
+ dpi->bus_fmt = default_bus_fmt;
+ ret = of_property_read_u32(dev->of_node, "default_bus_fmt", &dpi->bus_fmt);
+@@ -332,6 +337,33 @@ static int rp1dpi_platform_probe(struct
+ if (ret)
+ goto done_err;
+
++ /* Check if PIO can snoop on or override DPI's GPIO1 */
++ dpi->gpio1_used = false;
++ for (i = 0; !dpi->gpio1_used; i++) {
++ u32 p = 0;
++ const char *str = NULL;
++ struct device_node *np1 = of_parse_phandle(dev->of_node, "pinctrl-0", i);
++
++ if (!np1)
++ break;
++
++ if (!of_property_read_string(np1, "function", &str) && !strcmp(str, "dpi")) {
++ for (j = 0; !dpi->gpio1_used; j++) {
++ if (of_property_read_string_index(np1, "pins", j, &str))
++ break;
++ if (!strcmp(str, "gpio1"))
++ dpi->gpio1_used = true;
++ }
++ for (j = 0; !dpi->gpio1_used; j++) {
++ if (of_property_read_u32_index(np1, "brcm,pins", j, &p))
++ break;
++ if (p == 1)
++ dpi->gpio1_used = true;
++ }
++ }
++ of_node_put(np1);
++ }
++
+ /* Now we have all our resources, finish driver initialization */
+ dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64));
+ init_completion(&dpi->finished);
+--- a/drivers/gpu/drm/rp1/rp1-dpi/rp1_dpi.h
++++ b/drivers/gpu/drm/rp1/rp1-dpi/rp1_dpi.h
+@@ -46,6 +46,18 @@ struct rp1_dpi {
+ bool de_inv, clk_inv;
+ bool dpi_running, pipe_enabled;
+ struct completion finished;
++
++ /* Experimental stuff for interlace follows */
++ struct rp1_pio_client *pio;
++ bool gpio1_used;
++ bool pio_stole_gpio2;
++
++ spinlock_t hw_lock; /* the following are used in line-match ISR */
++ dma_addr_t last_dma_addr;
++ u32 last_stride;
++ u32 shorter_front_porch;
++ bool interlaced;
++ bool lower_field_flag;
+ };
+
+ /* ---------------------------------------------------------------------- */
+@@ -67,3 +79,9 @@ void rp1dpi_hw_vblank_ctrl(struct rp1_dp
+
+ void rp1dpi_vidout_setup(struct rp1_dpi *dpi, bool drive_negedge);
+ void rp1dpi_vidout_poweroff(struct rp1_dpi *dpi);
++
++/* ---------------------------------------------------------------------- */
++/* PIO control -- we need PIO to generate VSync (from DE) when interlaced */
++
++int rp1dpi_pio_start(struct rp1_dpi *dpi, const struct drm_display_mode *mode);
++void rp1dpi_pio_stop(struct rp1_dpi *dpi);
+--- a/drivers/gpu/drm/rp1/rp1-dpi/rp1_dpi_hw.c
++++ b/drivers/gpu/drm/rp1/rp1-dpi/rp1_dpi_hw.c
+@@ -202,7 +202,7 @@
+ // Status
+ #define DPI_DMA_STATUS 0x3c
+
+-#define BITS(field, val) (((val) << (field ## _SHIFT)) & (field ## _MASK))
++#define BITS(field, val) FIELD_PREP((field ## _MASK), val)
+
+ static unsigned int rp1dpi_hw_read(struct rp1_dpi *dpi, unsigned int reg)
+ {
+@@ -231,69 +231,73 @@ struct rp1dpi_ipixfmt {
+ u32 rgbsz; /* Shifts used for scaling; also (BPP/8-1) */
+ };
+
+-#define IMASK_RGB(r, g, b) (BITS(DPI_DMA_IMASK_R, r) | \
+- BITS(DPI_DMA_IMASK_G, g) | \
+- BITS(DPI_DMA_IMASK_B, b))
+-#define OMASK_RGB(r, g, b) (BITS(DPI_DMA_OMASK_R, r) | \
+- BITS(DPI_DMA_OMASK_G, g) | \
+- BITS(DPI_DMA_OMASK_B, b))
+-#define ISHIFT_RGB(r, g, b) (BITS(DPI_DMA_SHIFT_IR, r) | \
+- BITS(DPI_DMA_SHIFT_IG, g) | \
+- BITS(DPI_DMA_SHIFT_IB, b))
+-#define OSHIFT_RGB(r, g, b) (BITS(DPI_DMA_SHIFT_OR, r) | \
+- BITS(DPI_DMA_SHIFT_OG, g) | \
+- BITS(DPI_DMA_SHIFT_OB, b))
++#define IMASK_RGB(r, g, b) (FIELD_PREP_CONST(DPI_DMA_IMASK_R_MASK, r) | \
++ FIELD_PREP_CONST(DPI_DMA_IMASK_G_MASK, g) | \
++ FIELD_PREP_CONST(DPI_DMA_IMASK_B_MASK, b))
++#define OMASK_RGB(r, g, b) (FIELD_PREP_CONST(DPI_DMA_OMASK_R_MASK, r) | \
++ FIELD_PREP_CONST(DPI_DMA_OMASK_G_MASK, g) | \
++ FIELD_PREP_CONST(DPI_DMA_OMASK_B_MASK, b))
++#define ISHIFT_RGB(r, g, b) (FIELD_PREP_CONST(DPI_DMA_SHIFT_IR_MASK, r) | \
++ FIELD_PREP_CONST(DPI_DMA_SHIFT_IG_MASK, g) | \
++ FIELD_PREP_CONST(DPI_DMA_SHIFT_IB_MASK, b))
++#define OSHIFT_RGB(r, g, b) (FIELD_PREP_CONST(DPI_DMA_SHIFT_OR_MASK, r) | \
++ FIELD_PREP_CONST(DPI_DMA_SHIFT_OG_MASK, g) | \
++ FIELD_PREP_CONST(DPI_DMA_SHIFT_OB_MASK, b))
+
+ static const struct rp1dpi_ipixfmt my_formats[] = {
+ {
+ .format = DRM_FORMAT_XRGB8888,
+ .mask = IMASK_RGB(0x3fc, 0x3fc, 0x3fc),
+ .shift = ISHIFT_RGB(23, 15, 7),
+- .rgbsz = BITS(DPI_DMA_RGBSZ_BPP, 3),
++ .rgbsz = FIELD_PREP_CONST(DPI_DMA_RGBSZ_BPP_MASK, 3),
+ },
+ {
+ .format = DRM_FORMAT_XBGR8888,
+ .mask = IMASK_RGB(0x3fc, 0x3fc, 0x3fc),
+ .shift = ISHIFT_RGB(7, 15, 23),
+- .rgbsz = BITS(DPI_DMA_RGBSZ_BPP, 3),
++ .rgbsz = FIELD_PREP_CONST(DPI_DMA_RGBSZ_BPP_MASK, 3),
+ },
+ {
+ .format = DRM_FORMAT_ARGB8888,
+ .mask = IMASK_RGB(0x3fc, 0x3fc, 0x3fc),
+ .shift = ISHIFT_RGB(23, 15, 7),
+- .rgbsz = BITS(DPI_DMA_RGBSZ_BPP, 3),
++ .rgbsz = FIELD_PREP_CONST(DPI_DMA_RGBSZ_BPP_MASK, 3),
+ },
+ {
+ .format = DRM_FORMAT_ABGR8888,
+ .mask = IMASK_RGB(0x3fc, 0x3fc, 0x3fc),
+ .shift = ISHIFT_RGB(7, 15, 23),
+- .rgbsz = BITS(DPI_DMA_RGBSZ_BPP, 3),
++ .rgbsz = FIELD_PREP_CONST(DPI_DMA_RGBSZ_BPP_MASK, 3),
+ },
+ {
+ .format = DRM_FORMAT_RGB888,
+ .mask = IMASK_RGB(0x3fc, 0x3fc, 0x3fc),
+ .shift = ISHIFT_RGB(23, 15, 7),
+- .rgbsz = BITS(DPI_DMA_RGBSZ_BPP, 2),
++ .rgbsz = FIELD_PREP_CONST(DPI_DMA_RGBSZ_BPP_MASK, 2),
+ },
+ {
+ .format = DRM_FORMAT_BGR888,
+ .mask = IMASK_RGB(0x3fc, 0x3fc, 0x3fc),
+ .shift = ISHIFT_RGB(7, 15, 23),
+- .rgbsz = BITS(DPI_DMA_RGBSZ_BPP, 2),
++ .rgbsz = FIELD_PREP_CONST(DPI_DMA_RGBSZ_BPP_MASK, 2),
+ },
+ {
+ .format = DRM_FORMAT_RGB565,
+ .mask = IMASK_RGB(0x3e0, 0x3f0, 0x3e0),
+ .shift = ISHIFT_RGB(15, 10, 4),
+- .rgbsz = BITS(DPI_DMA_RGBSZ_R, 5) | BITS(DPI_DMA_RGBSZ_G, 6) |
+- BITS(DPI_DMA_RGBSZ_B, 5) | BITS(DPI_DMA_RGBSZ_BPP, 1),
++ .rgbsz = (FIELD_PREP_CONST(DPI_DMA_RGBSZ_R_MASK, 5) |
++ FIELD_PREP_CONST(DPI_DMA_RGBSZ_G_MASK, 6) |
++ FIELD_PREP_CONST(DPI_DMA_RGBSZ_B_MASK, 5) |
++ FIELD_PREP_CONST(DPI_DMA_RGBSZ_BPP_MASK, 1)),
+ },
+ {
+ .format = DRM_FORMAT_BGR565,
+ .mask = IMASK_RGB(0x3e0, 0x3f0, 0x3e0),
+ .shift = ISHIFT_RGB(4, 10, 15),
+- .rgbsz = BITS(DPI_DMA_RGBSZ_R, 5) | BITS(DPI_DMA_RGBSZ_G, 6) |
+- BITS(DPI_DMA_RGBSZ_B, 5) | BITS(DPI_DMA_RGBSZ_BPP, 1),
++ .rgbsz = (FIELD_PREP_CONST(DPI_DMA_RGBSZ_R_MASK, 5) |
++ FIELD_PREP_CONST(DPI_DMA_RGBSZ_G_MASK, 6) |
++ FIELD_PREP_CONST(DPI_DMA_RGBSZ_B_MASK, 5) |
++ FIELD_PREP_CONST(DPI_DMA_RGBSZ_BPP_MASK, 1)),
+ }
+ };
+
+@@ -354,42 +358,26 @@ void rp1dpi_hw_setup(struct rp1_dpi *dpi
+ u32 in_format, u32 bus_format, bool de_inv,
+ struct drm_display_mode const *mode)
+ {
+- u32 shift, imask, omask, rgbsz;
++ u32 shift, imask, omask, rgbsz, vctrl;
+ int i;
+
+- pr_info("%s: in_fmt=\'%c%c%c%c\' bus_fmt=0x%x mode=%dx%d total=%dx%d %dkHz %cH%cV%cD%cC",
+- __func__, in_format, in_format >> 8, in_format >> 16, in_format >> 24, bus_format,
+- mode->hdisplay, mode->vdisplay,
+- mode->htotal, mode->vtotal,
+- mode->clock,
+- (mode->flags & DRM_MODE_FLAG_NHSYNC) ? '-' : '+',
+- (mode->flags & DRM_MODE_FLAG_NVSYNC) ? '-' : '+',
+- de_inv ? '-' : '+',
+- dpi->clk_inv ? '-' : '+');
++ drm_info(&dpi->drm,
++ "in_fmt=\'%c%c%c%c\' bus_fmt=0x%x mode=%dx%d total=%dx%d%s %dkHz %cH%cV%cD%cC",
++ in_format, in_format >> 8, in_format >> 16, in_format >> 24, bus_format,
++ mode->hdisplay, mode->vdisplay,
++ mode->htotal, mode->vtotal,
++ (mode->flags & DRM_MODE_FLAG_INTERLACE) ? "i" : "",
++ mode->clock,
++ (mode->flags & DRM_MODE_FLAG_NHSYNC) ? '-' : '+',
++ (mode->flags & DRM_MODE_FLAG_NVSYNC) ? '-' : '+',
++ de_inv ? '-' : '+',
++ dpi->clk_inv ? '-' : '+');
+
+ /*
+ * Configure all DPI/DMA block registers, except base address.
+ * DMA will not actually start until a FB base address is specified
+ * using rp1dpi_hw_update().
+ */
+- rp1dpi_hw_write(dpi, DPI_DMA_VISIBLE_AREA,
+- BITS(DPI_DMA_VISIBLE_AREA_ROWSM1, mode->vdisplay - 1) |
+- BITS(DPI_DMA_VISIBLE_AREA_COLSM1, mode->hdisplay - 1));
+-
+- rp1dpi_hw_write(dpi, DPI_DMA_SYNC_WIDTH,
+- BITS(DPI_DMA_SYNC_WIDTH_ROWSM1, mode->vsync_end - mode->vsync_start - 1) |
+- BITS(DPI_DMA_SYNC_WIDTH_COLSM1, mode->hsync_end - mode->hsync_start - 1));
+-
+- /* In these registers, "back porch" time includes sync width */
+- rp1dpi_hw_write(dpi, DPI_DMA_BACK_PORCH,
+- BITS(DPI_DMA_BACK_PORCH_ROWSM1, mode->vtotal - mode->vsync_start - 1) |
+- BITS(DPI_DMA_BACK_PORCH_COLSM1, mode->htotal - mode->hsync_start - 1));
+-
+- rp1dpi_hw_write(dpi, DPI_DMA_FRONT_PORCH,
+- BITS(DPI_DMA_FRONT_PORCH_ROWSM1, mode->vsync_start - mode->vdisplay - 1) |
+- BITS(DPI_DMA_FRONT_PORCH_COLSM1, mode->hsync_start - mode->hdisplay - 1));
+-
+- /* Input to output pixel format conversion */
+ for (i = 0; i < ARRAY_SIZE(my_formats); ++i) {
+ if (my_formats[i].format == in_format)
+ break;
+@@ -417,6 +405,89 @@ void rp1dpi_hw_setup(struct rp1_dpi *dpi
+ BITS(DPI_DMA_QOS_LLEV, 0x8) |
+ BITS(DPI_DMA_QOS_LQOS, 0x7));
+
++ if (!(mode->flags & DRM_MODE_FLAG_INTERLACE)) {
++ rp1dpi_hw_write(dpi, DPI_DMA_VISIBLE_AREA,
++ BITS(DPI_DMA_VISIBLE_AREA_ROWSM1, mode->vdisplay - 1) |
++ BITS(DPI_DMA_VISIBLE_AREA_COLSM1, mode->hdisplay - 1));
++
++ rp1dpi_hw_write(dpi, DPI_DMA_SYNC_WIDTH,
++ BITS(DPI_DMA_SYNC_WIDTH_ROWSM1,
++ mode->vsync_end - mode->vsync_start - 1) |
++ BITS(DPI_DMA_SYNC_WIDTH_COLSM1,
++ mode->hsync_end - mode->hsync_start - 1));
++
++ /* In these registers, "back porch" time includes sync width */
++ rp1dpi_hw_write(dpi, DPI_DMA_BACK_PORCH,
++ BITS(DPI_DMA_BACK_PORCH_ROWSM1,
++ mode->vtotal - mode->vsync_start - 1) |
++ BITS(DPI_DMA_BACK_PORCH_COLSM1,
++ mode->htotal - mode->hsync_start - 1));
++
++ rp1dpi_hw_write(dpi, DPI_DMA_FRONT_PORCH,
++ BITS(DPI_DMA_FRONT_PORCH_ROWSM1,
++ mode->vsync_start - mode->vdisplay - 1) |
++ BITS(DPI_DMA_FRONT_PORCH_COLSM1,
++ mode->hsync_start - mode->hdisplay - 1));
++
++ vctrl = BITS(DPI_DMA_CONTROL_VSYNC_POL, !!(mode->flags & DRM_MODE_FLAG_NVSYNC)) |
++ BITS(DPI_DMA_CONTROL_VBP_EN, (mode->vtotal != mode->vsync_start)) |
++ BITS(DPI_DMA_CONTROL_VFP_EN, (mode->vsync_start != mode->vdisplay)) |
++ BITS(DPI_DMA_CONTROL_VSYNC_EN, (mode->vsync_end != mode->vsync_start));
++
++ dpi->interlaced = false;
++ } else {
++ /*
++ * Experimental interlace support
++ *
++ * RP1 DPI hardware wasn't designed to support interlace, but lets us change
++ * both the VFP line count and the next DMA address while running. That allows
++ * pixel data to be correctly timed for interlace, but VSYNC remains wrong.
++ *
++ * It is necessary to use external hardware (such as PIO) to regenerate VSYNC
++ * based on HSYNC, DE (which *must* both be mapped to GPIOs 1, 3 respectively).
++ * This driver includes a PIO program to do that, when DE is enabled.
++ *
++ * An alternative fixup is to synthesize CSYNC from HSYNC and modified-VSYNC.
++ * We don't implement that here, but to facilitate it, DPI's VSYNC is replaced
++ * by a "helper signal" that pulses low for 1 or 2 scan-lines, starting 2.0 or
++ * 2.5 scan-lines respectively before nominal VSYNC start.
++ */
++ int vact = mode->vdisplay >> 1; /* visible lines per field. Can't do half-lines */
++ int vtot0 = mode->vtotal >> 1; /* vtotal should always be odd when interlaced. */
++ int vfp0 = (mode->vsync_start >= mode->vdisplay + 4) ?
++ ((mode->vsync_start - mode->vdisplay - 2) >> 1) : 1;
++ int vbp = max(0, vtot0 - vact - vfp0);
++
++ rp1dpi_hw_write(dpi, DPI_DMA_VISIBLE_AREA,
++ BITS(DPI_DMA_VISIBLE_AREA_ROWSM1, vact - 1) |
++ BITS(DPI_DMA_VISIBLE_AREA_COLSM1, mode->hdisplay - 1));
++
++ rp1dpi_hw_write(dpi, DPI_DMA_SYNC_WIDTH,
++ BITS(DPI_DMA_SYNC_WIDTH_ROWSM1, vtot0 - 2) |
++ BITS(DPI_DMA_SYNC_WIDTH_COLSM1,
++ mode->hsync_end - mode->hsync_start - 1));
++
++ rp1dpi_hw_write(dpi, DPI_DMA_BACK_PORCH,
++ BITS(DPI_DMA_BACK_PORCH_ROWSM1, vbp - 1) |
++ BITS(DPI_DMA_BACK_PORCH_COLSM1,
++ mode->htotal - mode->hsync_start - 1));
++
++ dpi->shorter_front_porch =
++ BITS(DPI_DMA_FRONT_PORCH_ROWSM1, vfp0 - 1) |
++ BITS(DPI_DMA_FRONT_PORCH_COLSM1,
++ mode->hsync_start - mode->hdisplay - 1);
++ rp1dpi_hw_write(dpi, DPI_DMA_FRONT_PORCH, dpi->shorter_front_porch);
++
++ vctrl = BITS(DPI_DMA_CONTROL_VSYNC_POL, 0) |
++ BITS(DPI_DMA_CONTROL_VBP_EN, (vbp > 0)) |
++ BITS(DPI_DMA_CONTROL_VFP_EN, 1) |
++ BITS(DPI_DMA_CONTROL_VSYNC_EN, 1);
++
++ dpi->interlaced = true;
++ }
++ dpi->lower_field_flag = false;
++ dpi->last_dma_addr = 0;
++
+ rp1dpi_hw_write(dpi, DPI_DMA_IRQ_FLAGS, -1);
+ rp1dpi_hw_vblank_ctrl(dpi, 1);
+
+@@ -425,49 +496,64 @@ void rp1dpi_hw_setup(struct rp1_dpi *dpi
+ pr_warn("%s: Unexpectedly busy at start!", __func__);
+
+ rp1dpi_hw_write(dpi, DPI_DMA_CONTROL,
++ vctrl |
+ BITS(DPI_DMA_CONTROL_ARM, !i) |
+ BITS(DPI_DMA_CONTROL_AUTO_REPEAT, 1) |
+ BITS(DPI_DMA_CONTROL_HIGH_WATER, 448) |
+ BITS(DPI_DMA_CONTROL_DEN_POL, de_inv) |
+ BITS(DPI_DMA_CONTROL_HSYNC_POL, !!(mode->flags & DRM_MODE_FLAG_NHSYNC)) |
+- BITS(DPI_DMA_CONTROL_VSYNC_POL, !!(mode->flags & DRM_MODE_FLAG_NVSYNC)) |
+- BITS(DPI_DMA_CONTROL_COLORM, 0) |
+- BITS(DPI_DMA_CONTROL_SHUTDN, 0) |
+ BITS(DPI_DMA_CONTROL_HBP_EN, (mode->htotal != mode->hsync_end)) |
+ BITS(DPI_DMA_CONTROL_HFP_EN, (mode->hsync_start != mode->hdisplay)) |
+- BITS(DPI_DMA_CONTROL_VBP_EN, (mode->vtotal != mode->vsync_end)) |
+- BITS(DPI_DMA_CONTROL_VFP_EN, (mode->vsync_start != mode->vdisplay)) |
+- BITS(DPI_DMA_CONTROL_HSYNC_EN, (mode->hsync_end != mode->hsync_start)) |
+- BITS(DPI_DMA_CONTROL_VSYNC_EN, (mode->vsync_end != mode->vsync_start)));
++ BITS(DPI_DMA_CONTROL_HSYNC_EN, (mode->hsync_end != mode->hsync_start)));
+ }
+
+ void rp1dpi_hw_update(struct rp1_dpi *dpi, dma_addr_t addr, u32 offset, u32 stride)
+ {
+- u64 a = addr + offset;
++ unsigned long flags;
++
++ spin_lock_irqsave(&dpi->hw_lock, flags);
+
+ /*
+ * Update STRIDE, DMAH and DMAL only. When called after rp1dpi_hw_setup(),
+ * DMA starts immediately; if already running, the buffer will flip at
+- * the next vertical sync event.
++ * the next vertical sync event. In interlaced mode, we need to adjust
++ * the address and stride to display only the current field, saving
++ * the original address (so it can be flipped for subsequent fields).
+ */
++ addr += offset;
++ dpi->last_dma_addr = addr;
++ dpi->last_stride = stride;
++ if (dpi->interlaced) {
++ if (dpi->lower_field_flag)
++ addr += stride;
++ stride *= 2;
++ }
+ rp1dpi_hw_write(dpi, DPI_DMA_DMA_STRIDE, stride);
+- rp1dpi_hw_write(dpi, DPI_DMA_DMA_ADDR_H, a >> 32);
+- rp1dpi_hw_write(dpi, DPI_DMA_DMA_ADDR_L, a & 0xFFFFFFFFu);
++ rp1dpi_hw_write(dpi, DPI_DMA_DMA_ADDR_H, addr >> 32);
++ rp1dpi_hw_write(dpi, DPI_DMA_DMA_ADDR_L, addr & 0xFFFFFFFFu);
++
++ spin_unlock_irqrestore(&dpi->hw_lock, flags);
+ }
+
+ void rp1dpi_hw_stop(struct rp1_dpi *dpi)
+ {
+ u32 ctrl;
++ unsigned long flags;
+
+ /*
+- * Stop DMA by turning off the Auto-Repeat flag, and wait up to 100ms for
+- * the current and any queued frame to end. "Force drain" flags are not used,
+- * as they seem to prevent DMA from re-starting properly; it's safer to wait.
++ * Stop DMA by turning off Auto-Repeat (and disable S/W field-flip),
++ * then wait up to 100ms for the current and any queued frame to end.
++ * (There is a "force drain" flag, but it can leave DPI in a broken
++ * state which prevents it from restarting; it's safer to wait.)
+ */
++ spin_lock_irqsave(&dpi->hw_lock, flags);
++ dpi->last_dma_addr = 0;
+ reinit_completion(&dpi->finished);
+ ctrl = rp1dpi_hw_read(dpi, DPI_DMA_CONTROL);
+ ctrl &= ~(DPI_DMA_CONTROL_ARM_MASK | DPI_DMA_CONTROL_AUTO_REPEAT_MASK);
+ rp1dpi_hw_write(dpi, DPI_DMA_CONTROL, ctrl);
++ spin_unlock_irqrestore(&dpi->hw_lock, flags);
++
+ if (!wait_for_completion_timeout(&dpi->finished, HZ / 10))
+ drm_err(&dpi->drm, "%s: timed out waiting for idle\n", __func__);
+ rp1dpi_hw_write(dpi, DPI_DMA_IRQ_EN, 0);
+@@ -476,10 +562,11 @@ void rp1dpi_hw_stop(struct rp1_dpi *dpi)
+ void rp1dpi_hw_vblank_ctrl(struct rp1_dpi *dpi, int enable)
+ {
+ rp1dpi_hw_write(dpi, DPI_DMA_IRQ_EN,
+- BITS(DPI_DMA_IRQ_EN_AFIFO_EMPTY, 1) |
+- BITS(DPI_DMA_IRQ_EN_UNDERFLOW, 1) |
+- BITS(DPI_DMA_IRQ_EN_DMA_READY, !!enable) |
+- BITS(DPI_DMA_IRQ_EN_MATCH_LINE, 4095));
++ BITS(DPI_DMA_IRQ_EN_AFIFO_EMPTY, 1) |
++ BITS(DPI_DMA_IRQ_EN_UNDERFLOW, 1) |
++ BITS(DPI_DMA_IRQ_EN_DMA_READY, !!enable) |
++ BITS(DPI_DMA_IRQ_EN_MATCH, dpi->interlaced) |
++ BITS(DPI_DMA_IRQ_EN_MATCH_LINE, 32));
+ }
+
+ irqreturn_t rp1dpi_hw_isr(int irq, void *dev)
+@@ -498,7 +585,35 @@ irqreturn_t rp1dpi_hw_isr(int irq, void
+ drm_crtc_handle_vblank(&dpi->pipe.crtc);
+ if (u & DPI_DMA_IRQ_FLAGS_AFIFO_EMPTY_MASK)
+ complete(&dpi->finished);
++
++ /*
++ * Added for interlace support: We use this mid-frame interrupt to
++ * wobble the VFP between fields, re-submitting the next-buffer address
++ * with an offset to display the opposite field. NB: rp1dpi_hw_update()
++ * may be called at any time, before or after, so locking is needed.
++ * H/W Auto-update is no longer needed (unless this IRQ is lost).
++ */
++ if ((u & DPI_DMA_IRQ_FLAGS_MATCH_MASK) && dpi->interlaced) {
++ unsigned long flags;
++ dma_addr_t a;
++
++ spin_lock_irqsave(&dpi->hw_lock, flags);
++ dpi->lower_field_flag = !dpi->lower_field_flag;
++ rp1dpi_hw_write(dpi, DPI_DMA_FRONT_PORCH,
++ dpi->shorter_front_porch +
++ BITS(DPI_DMA_FRONT_PORCH_ROWSM1,
++ dpi->lower_field_flag));
++ a = dpi->last_dma_addr;
++ if (a) {
++ if (dpi->lower_field_flag)
++ a += dpi->last_stride;
++ rp1dpi_hw_write(dpi, DPI_DMA_DMA_ADDR_H, a >> 32);
++ rp1dpi_hw_write(dpi, DPI_DMA_DMA_ADDR_L, a & 0xFFFFFFFFu);
++ }
++ spin_unlock_irqrestore(&dpi->hw_lock, flags);
++ }
+ }
+ }
++
+ return u ? IRQ_HANDLED : IRQ_NONE;
+ }
+--- /dev/null
++++ b/drivers/gpu/drm/rp1/rp1-dpi/rp1_dpi_pio.c
+@@ -0,0 +1,225 @@
++// SPDX-License-Identifier: GPL-2.0-only
++/*
++ * PIO code for Raspberry Pi RP1 DPI driver
++ *
++ * Copyright (c) 2024 Raspberry Pi Limited.
++ */
++
++/*
++ * Use PIO to fix up VSYNC for interlaced modes.
++ *
++ * For this to work we *require* DPI's pinctrl to enable DE on GPIO1.
++ * PIO can then snoop on HSYNC and DE pins to generate corrected VSYNC.
++ *
++ * Note that corrected VSYNC outputs will not be synchronous to DPICLK,
++ * will lag HSYNC by about 30ns and may suffer up to 5ns of jitter.
++ */
++
++#include <linux/kernel.h>
++#include <linux/errno.h>
++#include <linux/of.h>
++#include <linux/pio_rp1.h>
++#include <linux/pinctrl/consumer.h>
++#include <linux/platform_device.h>
++#include <drm/drm_print.h>
++
++#include "rp1_dpi.h"
++
++/*
++ * Start a PIO SM to generate an interrupt just after HSYNC onset, then another
++ * after a fixed delay (during which we assume HSYNC will have been deasserted).
++ */
++
++static int rp1dpi_pio_start_timer_both(struct rp1_dpi *dpi, u32 flags, u32 tc)
++{
++ static const u16 instructions[2][5] = {
++ { 0xa022, 0x2083, 0xc001, 0x0043, 0xc001 }, /* posedge */
++ { 0xa022, 0x2003, 0xc001, 0x0043, 0xc001 }, /* negedge */
++ };
++ const struct pio_program prog = {
++ .instructions = instructions[(flags & DRM_MODE_FLAG_NHSYNC) ? 1 : 0],
++ .length = ARRAY_SIZE(instructions[0]),
++ .origin = -1
++ };
++ int offset, sm;
++
++ sm = pio_claim_unused_sm(dpi->pio, true);
++ if (sm < 0)
++ return -EBUSY;
++
++ offset = pio_add_program(dpi->pio, &prog);
++ if (offset == PIO_ORIGIN_ANY)
++ return -EBUSY;
++
++ pio_sm_config cfg = pio_get_default_sm_config();
++
++ pio_sm_set_enabled(dpi->pio, sm, false);
++ sm_config_set_wrap(&cfg, offset, offset + 4);
++ pio_sm_init(dpi->pio, sm, offset, &cfg);
++
++ pio_sm_put(dpi->pio, sm, tc - 4);
++ pio_sm_exec(dpi->pio, sm, pio_encode_pull(false, false));
++ pio_sm_exec(dpi->pio, sm, pio_encode_out(pio_y, 32));
++ pio_sm_set_enabled(dpi->pio, sm, true);
++
++ return 0;
++}
++
++/*
++ * Snoop on DE, HSYNC to count half-lines in the vertical blanking interval
++ * to determine when the VSYNC pulse should start and finish. Then, at a
++ * suitable moment (which should be an odd number of half-lines since the
++ * last active line), sample DE again to detect field phase.
++ *
++ * This version assumes VFP length is within 2..129 half-lines for any field
++ * (one half-line delay is needed to sample DE; we always wait for the next
++ * half-line boundary to improve VSync start accuracy).
++ */
++
++static int rp1dpi_pio_vsync_ilace(struct rp1_dpi *dpi,
++ struct drm_display_mode const *mode)
++{
++ static const int wrap_target = 14;
++ static const int wrap = 26;
++ u16 instructions[] = { /* This is mutable */
++ 0xa0e6, // 0: mov osr, isr side 0 ; top: rewind parameters
++ 0x2081, // 1: wait 1 gpio, 1 side 0 ; main: while (!DE) wait;
++ 0x2783, // 2: wait 1 gpio, 3 side 0 [7] ; do { @HSync
++ 0xc041, // 3: irq clear 1 side 0 ; flush stale IRQs
++ 0x20c1, // 4: wait 1 irq, 1 side 0 ; @midline
++ 0x00c1, // 5: jmp pin, 1 side 0 ; } while (DE)
++ 0x0007, // 6: jmp 7 side 0 ; <modify for -DE fixup>
++ 0x6027, // 7: out x, 7 side 0 ; x = VFPlen - 2
++ 0x000a, // 8: jmp 10 side 0 ; while (x--) {
++ 0x20c1, // 9: wait 1 irq, 1 side 0 ; @halfline
++ 0x0049, // 10: jmp x--, 9 side 0 ; }
++ 0x6021, // 11: out x, 1 side 0 ; test for aligned case
++ 0x003a, // 12: jmp !x, 26 side 0 ; if (!x) goto precise;
++ 0x20c1, // 13: wait 1 irq, 1 side 0 ; @halfline
++ // .wrap_target ; vsjoin:
++ 0xb722, // 14: mov x, y side 1 [7] ; VSYNC=1; x = VSyncLen
++ 0xd041, // 15: irq clear 1 side 1 ; VSYNC=1; flush stale IRQs
++ 0x30c1, // 16: wait 1 irq, 1 side 1 ; VSYNC=1; do { @halfline
++ 0x1050, // 17: jmp x--, 16 side 1 ; VSYNC=1; } while (x--)
++ 0x6028, // 18: out x, 8 side 0 ; VSYNC=0; x = VBPLen
++ 0x0015, // 19: jmp 21 side 0 ; while (x--) {
++ 0x20c1, // 20: wait 1 irq, 1 side 0 ; @halfline
++ 0x0054, // 21: jmp x--, 20 side 0 ; }
++ 0x00c0, // 22: jmp pin, 0 side 0 ; if (DE) reset phase
++ 0x0018, // 23: jmp 24 side 0 ; <modify for -DE fixup>
++ 0x00e1, // 24: jmp !osre, 1 side 0 ; if (!phase) goto main
++ 0x0000, // 25: jmp 0 side 0 ; goto top
++ 0x2083, // 26: wait 1 gpio, 3 side 0 ; precise: @HSync
++ // .wrap ; goto vsjoin
++ };
++ struct pio_program prog = {
++ .instructions = instructions,
++ .length = ARRAY_SIZE(instructions),
++ .origin = -1
++ };
++ pio_sm_config cfg = pio_get_default_sm_config();
++ unsigned int i, offset;
++ u32 tc, vfp, vbp;
++ u32 sysclk = clock_get_hz(clk_sys);
++ int sm = pio_claim_unused_sm(dpi->pio, true);
++
++ if (sm < 0)
++ return -EBUSY;
++
++ /* Compute mid-line time constant and start the timer SM */
++ tc = (mode->htotal * (u64)sysclk) / (u64)(2000u * mode->clock);
++ if (rp1dpi_pio_start_timer_both(dpi, mode->flags, tc) < 0) {
++ pio_sm_unclaim(dpi->pio, sm);
++ return -EBUSY;
++ }
++
++ /* Adapt program code according to DE and Sync polarity; configure program */
++ pio_sm_set_enabled(dpi->pio, sm, false);
++ if (dpi->de_inv) {
++ instructions[1] ^= 0x0080;
++ instructions[5] = 0x00c7;
++ instructions[6] = 0x0001;
++ instructions[22] = 0x00d8;
++ instructions[23] = 0x0000;
++ }
++ for (i = 0; i < ARRAY_SIZE(instructions); i++) {
++ if (mode->flags & DRM_MODE_FLAG_NVSYNC)
++ instructions[i] ^= 0x1000;
++ if ((mode->flags & DRM_MODE_FLAG_NHSYNC) && (instructions[i] & 0xe07f) == 0x2003)
++ instructions[i] ^= 0x0080;
++ }
++ offset = pio_add_program(dpi->pio, &prog);
++ if (offset == PIO_ORIGIN_ANY)
++ return -EBUSY;
++
++ /* Configure pins and SM */
++ dpi->pio_stole_gpio2 = true;
++ sm_config_set_wrap(&cfg, offset + wrap_target, offset + wrap);
++ sm_config_set_sideset(&cfg, 1, false, false);
++ sm_config_set_sideset_pins(&cfg, 2);
++ pio_gpio_init(dpi->pio, 2);
++ sm_config_set_jmp_pin(&cfg, 1); /* "DE" is always GPIO1 */
++ pio_sm_init(dpi->pio, sm, offset, &cfg);
++ pio_sm_set_consecutive_pindirs(dpi->pio, sm, 2, 1, true);
++
++ /* Compute vertical times, remembering how we rounded vdisplay, vtotal */
++ vfp = mode->vsync_start - (mode->vdisplay & ~1);
++ vbp = (mode->vtotal | 1) - mode->vsync_end;
++ if (vfp > 128) {
++ vbp += vfp - 128;
++ vfp = 128;
++ } else if (vfp < 3) {
++ vbp = (vbp > 3 - vfp) ? (vbp - 3 + vfp) : 0;
++ vfp = 3;
++ }
++
++ pio_sm_put(dpi->pio, sm,
++ (vfp - 2) + ((vfp & 1) << 7) + (vbp << 8) +
++ ((vfp - 3) << 16) + (((~vfp) & 1) << 23) + ((vbp + 1) << 24));
++ pio_sm_put(dpi->pio, sm, mode->vsync_end - mode->vsync_start - 1);
++ pio_sm_exec(dpi->pio, sm, pio_encode_pull(false, false));
++ pio_sm_exec(dpi->pio, sm, pio_encode_out(pio_y, 32));
++ pio_sm_exec(dpi->pio, sm, pio_encode_in(pio_y, 32));
++ pio_sm_exec(dpi->pio, sm, pio_encode_pull(false, false));
++ pio_sm_exec(dpi->pio, sm, pio_encode_out(pio_y, 32));
++ pio_sm_set_enabled(dpi->pio, sm, true);
++
++ return 0;
++}
++
++int rp1dpi_pio_start(struct rp1_dpi *dpi, const struct drm_display_mode *mode)
++{
++ int r;
++
++ if (!(mode->flags & DRM_MODE_FLAG_INTERLACE) || !dpi->gpio1_used)
++ return 0;
++
++ if (dpi->pio)
++ pio_close(dpi->pio);
++
++ dpi->pio = pio_open();
++ if (IS_ERR(dpi->pio)) {
++ drm_err(&dpi->drm, "Could not open PIO\n");
++ dpi->pio = NULL;
++ return -ENODEV;
++ }
++
++ r = rp1dpi_pio_vsync_ilace(dpi, mode);
++ if (r) {
++ drm_err(&dpi->drm, "Failed to initialize PIO\n");
++ rp1dpi_pio_stop(dpi);
++ }
++
++ return r;
++}
++
++void rp1dpi_pio_stop(struct rp1_dpi *dpi)
++{
++ if (dpi->pio) {
++ if (dpi->pio_stole_gpio2)
++ pio_gpio_set_function(dpi->pio, 2, GPIO_FUNC_FSEL1);
++ pio_close(dpi->pio);
++ dpi->pio_stole_gpio2 = false;
++ dpi->pio = NULL;
++ }
++}
diff --git a/target/linux/bcm27xx/patches-6.6/950-1457-pwm-Improve-PWM_PIO_RP1-dependencies.patch b/target/linux/bcm27xx/patches-6.6/950-1457-pwm-Improve-PWM_PIO_RP1-dependencies.patch
new file mode 100644
index 0000000000..357cd05dc8
--- /dev/null
+++ b/target/linux/bcm27xx/patches-6.6/950-1457-pwm-Improve-PWM_PIO_RP1-dependencies.patch
@@ -0,0 +1,22 @@
+From f85f3509692f966ec32e4db499f7e64dc6b6b952 Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil at raspberrypi.com>
+Date: Thu, 12 Dec 2024 10:09:13 +0000
+Subject: [PATCH 1457/1482] pwm: Improve PWM_PIO_RP1 dependencies
+
+PWM_PIO_RP1 should select RP1_PIO, as it is useless without it.
+
+Signed-off-by: Phil Elwell <phil at raspberrypi.com>
+---
+ drivers/pwm/Kconfig | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/drivers/pwm/Kconfig
++++ b/drivers/pwm/Kconfig
+@@ -457,6 +457,7 @@ config PWM_PCA9685
+ config PWM_PIO_RP1
+ tristate "RP1 PIO PWM support"
+ depends on FIRMWARE_RP1 || COMPILE_TEST
++ select RP1_PIO
+ help
+ This is a PWM framework driver for Raspberry Pi 5, using the PIO
+ hardware of RP1 to provide PWM functionality. Supports up to 4
diff --git a/target/linux/bcm27xx/patches-6.6/950-1458-Revert-pwm-Improve-PWM_PIO_RP1-dependencies.patch b/target/linux/bcm27xx/patches-6.6/950-1458-Revert-pwm-Improve-PWM_PIO_RP1-dependencies.patch
new file mode 100644
index 0000000000..eabf3887d1
--- /dev/null
+++ b/target/linux/bcm27xx/patches-6.6/950-1458-Revert-pwm-Improve-PWM_PIO_RP1-dependencies.patch
@@ -0,0 +1,20 @@
+From 73fb1e979a210094935f4af4c3d6e700fba30c5f Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil at raspberrypi.com>
+Date: Thu, 12 Dec 2024 10:28:54 +0000
+Subject: [PATCH 1458/1482] Revert "pwm: Improve PWM_PIO_RP1 dependencies"
+
+This reverts commit f85f3509692f966ec32e4db499f7e64dc6b6b952.
+---
+ drivers/pwm/Kconfig | 1 -
+ 1 file changed, 1 deletion(-)
+
+--- a/drivers/pwm/Kconfig
++++ b/drivers/pwm/Kconfig
+@@ -457,7 +457,6 @@ config PWM_PCA9685
+ config PWM_PIO_RP1
+ tristate "RP1 PIO PWM support"
+ depends on FIRMWARE_RP1 || COMPILE_TEST
+- select RP1_PIO
+ help
+ This is a PWM framework driver for Raspberry Pi 5, using the PIO
+ hardware of RP1 to provide PWM functionality. Supports up to 4
diff --git a/target/linux/bcm27xx/patches-6.6/950-1463-drm-rp1-rp1-dpi-Fix-optional-dependency-on-RP1_PIO.patch b/target/linux/bcm27xx/patches-6.6/950-1463-drm-rp1-rp1-dpi-Fix-optional-dependency-on-RP1_PIO.patch
new file mode 100644
index 0000000000..52e87daa38
--- /dev/null
+++ b/target/linux/bcm27xx/patches-6.6/950-1463-drm-rp1-rp1-dpi-Fix-optional-dependency-on-RP1_PIO.patch
@@ -0,0 +1,99 @@
+From 80533a952218696c0ef1b346bab50dc401e6b74c Mon Sep 17 00:00:00 2001
+From: Nick Hollinghurst <nick.hollinghurst at raspberrypi.com>
+Date: Thu, 12 Dec 2024 11:58:12 +0000
+Subject: [PATCH 1463/1482] drm: rp1: rp1-dpi: Fix optional dependency on
+ RP1_PIO
+
+Add optional dependency to Kconfig, and conditionally compile
+PIO-dependent code. Add a mode validation function to reject
+interlaced modes when RP1_PIO is not present.
+
+Signed-off-by: Nick Hollinghurst <nick.hollinghurst at raspberrypi.com>
+---
+ drivers/gpu/drm/rp1/rp1-dpi/Kconfig | 7 ++++++-
+ drivers/gpu/drm/rp1/rp1-dpi/rp1_dpi.c | 16 ++++++++++++++++
+ drivers/gpu/drm/rp1/rp1-dpi/rp1_dpi_pio.c | 18 +++++++++++++++++-
+ 3 files changed, 39 insertions(+), 2 deletions(-)
+
+--- a/drivers/gpu/drm/rp1/rp1-dpi/Kconfig
++++ b/drivers/gpu/drm/rp1/rp1-dpi/Kconfig
+@@ -7,5 +7,10 @@ config DRM_RP1_DPI
+ select DRM_VRAM_HELPER
+ select DRM_TTM
+ select DRM_TTM_HELPER
++ depends on RP1_PIO || !RP1_PIO
+ help
+- Choose this option to enable Video Out on RP1
++ Choose this option to enable DPI output on Raspberry Pi RP1
++
++ There is an optional dependency on RP1_PIO, as the PIO block
++ must be used to fix up interlaced sync. Interlaced DPI modes
++ will be unavailable when RP1_PIO is not selected.
+--- a/drivers/gpu/drm/rp1/rp1-dpi/rp1_dpi.c
++++ b/drivers/gpu/drm/rp1/rp1-dpi/rp1_dpi.c
+@@ -217,12 +217,28 @@ static void rp1dpi_pipe_disable_vblank(s
+ rp1dpi_hw_vblank_ctrl(dpi, 0);
+ }
+
++static enum drm_mode_status rp1dpi_pipe_mode_valid(struct drm_simple_display_pipe *pipe,
++ const struct drm_display_mode *mode)
++{
++#if !IS_REACHABLE(CONFIG_RP1_PIO)
++ if (mode->flags & DRM_MODE_FLAG_INTERLACE)
++ return MODE_NO_INTERLACE;
++#endif
++ if (mode->clock < 1000) /* 1 MHz */
++ return MODE_CLOCK_LOW;
++ if (mode->clock > 200000) /* 200 MHz */
++ return MODE_CLOCK_HIGH;
++
++ return MODE_OK;
++}
++
+ static const struct drm_simple_display_pipe_funcs rp1dpi_pipe_funcs = {
+ .enable = rp1dpi_pipe_enable,
+ .update = rp1dpi_pipe_update,
+ .disable = rp1dpi_pipe_disable,
+ .enable_vblank = rp1dpi_pipe_enable_vblank,
+ .disable_vblank = rp1dpi_pipe_disable_vblank,
++ .mode_valid = rp1dpi_pipe_mode_valid,
+ };
+
+ static const struct drm_mode_config_funcs rp1dpi_mode_funcs = {
+--- a/drivers/gpu/drm/rp1/rp1-dpi/rp1_dpi_pio.c
++++ b/drivers/gpu/drm/rp1/rp1-dpi/rp1_dpi_pio.c
+@@ -18,13 +18,16 @@
+ #include <linux/kernel.h>
+ #include <linux/errno.h>
+ #include <linux/of.h>
+-#include <linux/pio_rp1.h>
+ #include <linux/pinctrl/consumer.h>
+ #include <linux/platform_device.h>
+ #include <drm/drm_print.h>
+
+ #include "rp1_dpi.h"
+
++#if IS_REACHABLE(CONFIG_RP1_PIO)
++
++#include <linux/pio_rp1.h>
++
+ /*
+ * Start a PIO SM to generate an interrupt just after HSYNC onset, then another
+ * after a fixed delay (during which we assume HSYNC will have been deasserted).
+@@ -223,3 +226,16 @@ void rp1dpi_pio_stop(struct rp1_dpi *dpi
+ dpi->pio = NULL;
+ }
+ }
++
++#else /* !IS_REACHABLE(CONFIG_RP1_PIO) */
++
++int rp1dpi_pio_start(struct rp1_dpi *dpi, const struct drm_display_mode *mode)
++{
++ return -ENODEV;
++}
++
++void rp1dpi_pio_stop(struct rp1_dpi *dpi)
++{
++}
++
++#endif
diff --git a/target/linux/bcm27xx/patches-6.6/950-1468-misc-rp1-pio-Support-larger-data-transfers.patch b/target/linux/bcm27xx/patches-6.6/950-1468-misc-rp1-pio-Support-larger-data-transfers.patch
new file mode 100644
index 0000000000..828efdb79b
--- /dev/null
+++ b/target/linux/bcm27xx/patches-6.6/950-1468-misc-rp1-pio-Support-larger-data-transfers.patch
@@ -0,0 +1,127 @@
+From 4b0ca96738bb937529655a0062d60775f47b0f5e Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil at raspberrypi.com>
+Date: Mon, 16 Dec 2024 23:01:41 +0000
+Subject: [PATCH 1468/1482] misc: rp1-pio: Support larger data transfers
+
+Add a separate IOCTL for larger transfer with a 32-bit data_bytes
+field.
+
+See: https://github.com/raspberrypi/utils/issues/107
+
+Signed-off-by: Phil Elwell <phil at raspberrypi.com>
+---
+ drivers/misc/rp1-pio.c | 43 +++++++++++++++++++++++++++++++---
+ include/uapi/misc/rp1_pio_if.h | 8 +++++++
+ 2 files changed, 48 insertions(+), 3 deletions(-)
+
+--- a/drivers/misc/rp1-pio.c
++++ b/drivers/misc/rp1-pio.c
+@@ -824,9 +824,9 @@ static int rp1_pio_sm_rx_user(struct rp1
+ return ret;
+ }
+
+-static int rp1_pio_sm_xfer_data(struct rp1_pio_client *client, void *param)
++static int rp1_pio_sm_xfer_data32(struct rp1_pio_client *client, void *param)
+ {
+- struct rp1_pio_sm_xfer_data_args *args = param;
++ struct rp1_pio_sm_xfer_data32_args *args = param;
+ struct rp1_pio_device *pio = client->pio;
+ struct dma_info *dma;
+
+@@ -842,6 +842,19 @@ static int rp1_pio_sm_xfer_data(struct r
+ return rp1_pio_sm_rx_user(pio, dma, args->data, args->data_bytes);
+ }
+
++static int rp1_pio_sm_xfer_data(struct rp1_pio_client *client, void *param)
++{
++ struct rp1_pio_sm_xfer_data_args *args = param;
++ struct rp1_pio_sm_xfer_data32_args args32;
++
++ args32.sm = args->sm;
++ args32.dir = args->dir;
++ args32.data_bytes = args->data_bytes;
++ args32.data = args->data;
++
++ return rp1_pio_sm_xfer_data32(client, &args32);
++}
++
+ struct handler_info {
+ const char *name;
+ int (*func)(struct rp1_pio_client *client, void *param);
+@@ -849,6 +862,7 @@ struct handler_info {
+ } ioctl_handlers[] = {
+ HANDLER(SM_CONFIG_XFER, sm_config_xfer),
+ HANDLER(SM_XFER_DATA, sm_xfer_data),
++ HANDLER(SM_XFER_DATA32, sm_xfer_data32),
+
+ HANDLER(CAN_ADD_PROGRAM, can_add_program),
+ HANDLER(ADD_PROGRAM, add_program),
+@@ -1032,13 +1046,23 @@ struct rp1_pio_sm_xfer_data_args_compat
+ compat_uptr_t data;
+ };
+
++struct rp1_pio_sm_xfer_data32_args_compat {
++ uint16_t sm;
++ uint16_t dir;
++ uint32_t data_bytes;
++ compat_uptr_t data;
++};
++
+ struct rp1_access_hw_args_compat {
+ uint32_t addr;
+ uint32_t len;
+ compat_uptr_t data;
+ };
+
+-#define PIO_IOC_SM_XFER_DATA_COMPAT _IOW(PIO_IOC_MAGIC, 1, struct rp1_pio_sm_xfer_data_args_compat)
++#define PIO_IOC_SM_XFER_DATA_COMPAT \
++ _IOW(PIO_IOC_MAGIC, 1, struct rp1_pio_sm_xfer_data_args_compat)
++#define PIO_IOC_SM_XFER_DATA32_COMPAT \
++ _IOW(PIO_IOC_MAGIC, 2, struct rp1_pio_sm_xfer_data32_args_compat)
+ #define PIO_IOC_READ_HW_COMPAT _IOW(PIO_IOC_MAGIC, 8, struct rp1_access_hw_args_compat)
+ #define PIO_IOC_WRITE_HW_COMPAT _IOW(PIO_IOC_MAGIC, 9, struct rp1_access_hw_args_compat)
+
+@@ -1061,6 +1085,19 @@ static long rp1_pio_compat_ioctl(struct
+ param.data = compat_ptr(compat_param.data);
+ return rp1_pio_sm_xfer_data(client, ¶m);
+ }
++ case PIO_IOC_SM_XFER_DATA32_COMPAT:
++ {
++ struct rp1_pio_sm_xfer_data32_args_compat compat_param;
++ struct rp1_pio_sm_xfer_data32_args param;
++
++ if (copy_from_user(&compat_param, compat_ptr(ioctl_param), sizeof(compat_param)))
++ return -EFAULT;
++ param.sm = compat_param.sm;
++ param.dir = compat_param.dir;
++ param.data_bytes = compat_param.data_bytes;
++ param.data = compat_ptr(compat_param.data);
++ return rp1_pio_sm_xfer_data32(client, ¶m);
++ }
+
+ case PIO_IOC_READ_HW_COMPAT:
+ case PIO_IOC_WRITE_HW_COMPAT:
+--- a/include/uapi/misc/rp1_pio_if.h
++++ b/include/uapi/misc/rp1_pio_if.h
+@@ -167,6 +167,13 @@ struct rp1_pio_sm_xfer_data_args {
+ void *data;
+ };
+
++struct rp1_pio_sm_xfer_data32_args {
++ uint16_t sm;
++ uint16_t dir;
++ uint32_t data_bytes;
++ void *data;
++};
++
+ struct rp1_access_hw_args {
+ uint32_t addr;
+ uint32_t len;
+@@ -177,6 +184,7 @@ struct rp1_access_hw_args {
+
+ #define PIO_IOC_SM_CONFIG_XFER _IOW(PIO_IOC_MAGIC, 0, struct rp1_pio_sm_config_xfer_args)
+ #define PIO_IOC_SM_XFER_DATA _IOW(PIO_IOC_MAGIC, 1, struct rp1_pio_sm_xfer_data_args)
++#define PIO_IOC_SM_XFER_DATA32 _IOW(PIO_IOC_MAGIC, 2, struct rp1_pio_sm_xfer_data32_args)
+
+ #define PIO_IOC_READ_HW _IOW(PIO_IOC_MAGIC, 8, struct rp1_access_hw_args)
+ #define PIO_IOC_WRITE_HW _IOW(PIO_IOC_MAGIC, 9, struct rp1_access_hw_args)
diff --git a/target/linux/bcm27xx/patches-6.6/950-1471-fixup-misc-Add-RP1-PIO-driver.patch b/target/linux/bcm27xx/patches-6.6/950-1471-fixup-misc-Add-RP1-PIO-driver.patch
new file mode 100644
index 0000000000..696c0d9186
--- /dev/null
+++ b/target/linux/bcm27xx/patches-6.6/950-1471-fixup-misc-Add-RP1-PIO-driver.patch
@@ -0,0 +1,24 @@
+From cd26850713088942ca4f9a248a8bed1f0504a58f Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil at raspberrypi.com>
+Date: Thu, 19 Dec 2024 15:11:40 +0000
+Subject: [PATCH 1471/1482] fixup! misc: Add RP1 PIO driver
+
+Change the Kconfig dependencies so that RP1_PIO depends on FIRMWARE_RP1,
+rather than selecting it.
+
+Signed-off-by: Phil Elwell <phil at raspberrypi.com>
+---
+ drivers/misc/Kconfig | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/misc/Kconfig
++++ b/drivers/misc/Kconfig
+@@ -19,7 +19,7 @@ config BCM2835_SMI
+
+ config RP1_PIO
+ tristate "Raspberry Pi RP1 PIO driver"
+- select FIRMWARE_RP1
++ depends on FIRMWARE_RP1 || COMPILE_TEST
+ default n
+ help
+ Driver providing control of the Raspberry Pi PIO block, as found in
diff --git a/target/linux/bcm27xx/patches-6.6/950-1473-misc-rp1-pio-More-logical-probe-sequence.patch b/target/linux/bcm27xx/patches-6.6/950-1473-misc-rp1-pio-More-logical-probe-sequence.patch
new file mode 100644
index 0000000000..3204997b6e
--- /dev/null
+++ b/target/linux/bcm27xx/patches-6.6/950-1473-misc-rp1-pio-More-logical-probe-sequence.patch
@@ -0,0 +1,81 @@
+From 468b525d45a726e4ba704b33c4eba53de47ac684 Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil at raspberrypi.com>
+Date: Thu, 5 Dec 2024 16:03:39 +0000
+Subject: [PATCH 1473/1482] misc: rp1-pio: More logical probe sequence
+
+Sort the probe function initialisation into a more logical order.
+
+Signed-off-by: Phil Elwell <phil at raspberrypi.com>
+---
+ drivers/misc/rp1-pio.c | 31 +++++++++++++++----------------
+ 1 file changed, 15 insertions(+), 16 deletions(-)
+
+--- a/drivers/misc/rp1-pio.c
++++ b/drivers/misc/rp1-pio.c
+@@ -1153,6 +1153,10 @@ static int rp1_pio_probe(struct platform
+ return -EINVAL;
+ }
+
++ pdev->id = of_alias_get_id(pdev->dev.of_node, "pio");
++ if (pdev->id < 0)
++ return dev_err_probe(dev, pdev->id, "alias is missing\n");
++
+ fw = devm_rp1_firmware_get(dev, dev->of_node);
+ if (IS_ERR(fw))
+ return PTR_ERR(fw);
+@@ -1185,31 +1189,26 @@ static int rp1_pio_probe(struct platform
+ goto out_err;
+ }
+
+- cdev_init(&pio->cdev, &rp1_pio_fops);
+- ret = cdev_add(&pio->cdev, pio->dev_num, 1);
+- if (ret) {
+- dev_err(dev, "cdev_add failed (err %d)\n", ret);
+- goto out_unregister;
+- }
+-
+ pio->dev_class = class_create(DRIVER_NAME);
+ if (IS_ERR(pio->dev_class)) {
+ ret = PTR_ERR(pio->dev_class);
+ dev_err(dev, "class_create failed (err %d)\n", ret);
+- goto out_cdev_del;
++ goto out_unregister;
+ }
+- pdev->id = of_alias_get_id(pdev->dev.of_node, "pio");
+- if (pdev->id < 0) {
+- dev_err(dev, "alias is missing\n");
+- return -EINVAL;
++
++ cdev_init(&pio->cdev, &rp1_pio_fops);
++ ret = cdev_add(&pio->cdev, pio->dev_num, 1);
++ if (ret) {
++ dev_err(dev, "cdev_add failed (err %d)\n", ret);
+ goto out_class_destroy;
+ }
++
+ sprintf(dev_name, "pio%d", pdev->id);
+ cdev = device_create(pio->dev_class, NULL, pio->dev_num, NULL, dev_name);
+ if (IS_ERR(cdev)) {
+ ret = PTR_ERR(cdev);
+ dev_err(dev, "%s: device_create failed (err %d)\n", __func__, ret);
+- goto out_class_destroy;
++ goto out_cdev_del;
+ }
+
+ g_pio = pio;
+@@ -1217,12 +1216,12 @@ static int rp1_pio_probe(struct platform
+ dev_info(dev, "Created instance as %s\n", dev_name);
+ return 0;
+
+-out_class_destroy:
+- class_destroy(pio->dev_class);
+-
+ out_cdev_del:
+ cdev_del(&pio->cdev);
+
++out_class_destroy:
++ class_destroy(pio->dev_class);
++
+ out_unregister:
+ unregister_chrdev_region(pio->dev_num, 1);
+
diff --git a/target/linux/bcm27xx/patches-6.6/950-1474-misc-rp1-pio-Convert-floats-to-24.8-fixed-point.patch b/target/linux/bcm27xx/patches-6.6/950-1474-misc-rp1-pio-Convert-floats-to-24.8-fixed-point.patch
new file mode 100644
index 0000000000..ba997136bd
--- /dev/null
+++ b/target/linux/bcm27xx/patches-6.6/950-1474-misc-rp1-pio-Convert-floats-to-24.8-fixed-point.patch
@@ -0,0 +1,92 @@
+From 5c07ba20630a629399eaa6583457aca93ff74606 Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil at raspberrypi.com>
+Date: Mon, 9 Dec 2024 09:58:29 +0000
+Subject: [PATCH 1474/1482] misc: rp1-pio: Convert floats to 24.8 fixed point
+
+Floating point arithmetic is not supported in the kernel, so use fixed
+point instead.
+
+Signed-off-by: Phil Elwell <phil at raspberrypi.com>
+---
+ include/linux/pio_rp1.h | 29 +++++++++++++++++++++--------
+ 1 file changed, 21 insertions(+), 8 deletions(-)
+
+--- a/include/linux/pio_rp1.h
++++ b/include/linux/pio_rp1.h
+@@ -171,6 +171,10 @@ enum gpio_drive_strength {
+ GPIO_DRIVE_STRENGTH_12MA = 3
+ };
+
++struct fp24_8 {
++ uint32_t val;
++};
++
+ typedef rp1_pio_sm_config pio_sm_config;
+
+ typedef struct rp1_pio_client *PIO;
+@@ -218,6 +222,13 @@ void pio_close(PIO pio);
+ int pio_sm_config_xfer(PIO pio, uint sm, uint dir, uint buf_size, uint buf_count);
+ int pio_sm_xfer_data(PIO pio, uint sm, uint dir, uint data_bytes, void *data);
+
++static inline struct fp24_8 make_fp24_8(uint mul, uint div)
++{
++ struct fp24_8 res = { .val = ((unsigned long long)mul << 8) / div };
++
++ return res;
++}
++
+ static inline bool pio_can_add_program(struct rp1_pio_client *client,
+ const pio_program_t *program)
+ {
+@@ -396,16 +407,18 @@ static inline int pio_sm_clear_fifos(str
+ return rp1_pio_sm_clear_fifos(client, &args);
+ }
+
+-static inline bool pio_calculate_clkdiv_from_float(float div, uint16_t *div_int,
++static inline bool pio_calculate_clkdiv_from_fp24_8(struct fp24_8 div, uint16_t *div_int,
+ uint8_t *div_frac)
+ {
+- if (bad_params_if(NULL, div < 1 || div > 65536))
++ uint inum = (div.val >> 8);
++
++ if (bad_params_if(NULL, inum < 1 || inum > 65536))
+ return false;
+- *div_int = (uint16_t)div;
++ *div_int = (uint16_t)inum;
+ if (*div_int == 0)
+ *div_frac = 0;
+ else
+- *div_frac = (uint8_t)((div - (float)*div_int) * (1u << 8u));
++ *div_frac = div.val & 0xff;
+ return true;
+ }
+
+@@ -421,11 +434,11 @@ static inline int pio_sm_set_clkdiv_int_
+ return rp1_pio_sm_set_clkdiv(client, &args);
+ }
+
+-static inline int pio_sm_set_clkdiv(struct rp1_pio_client *client, uint sm, float div)
++static inline int pio_sm_set_clkdiv(struct rp1_pio_client *client, uint sm, struct fp24_8 div)
+ {
+ struct rp1_pio_sm_set_clkdiv_args args = { .sm = sm };
+
+- if (!pio_calculate_clkdiv_from_float(div, &args.div_int, &args.div_frac))
++ if (!pio_calculate_clkdiv_from_fp24_8(div, &args.div_int, &args.div_frac))
+ return -EINVAL;
+ return rp1_pio_sm_set_clkdiv(client, &args);
+ }
+@@ -745,12 +758,12 @@ static inline void sm_config_set_clkdiv_
+ (((uint)div_int) << PROC_PIO_SM0_CLKDIV_INT_LSB);
+ }
+
+-static inline void sm_config_set_clkdiv(pio_sm_config *c, float div)
++static inline void sm_config_set_clkdiv(pio_sm_config *c, struct fp24_8 div)
+ {
+ uint16_t div_int;
+ uint8_t div_frac;
+
+- pio_calculate_clkdiv_from_float(div, &div_int, &div_frac);
++ pio_calculate_clkdiv_from_fp24_8(div, &div_int, &div_frac);
+ sm_config_set_clkdiv_int_frac(c, div_int, div_frac);
+ }
+
diff --git a/target/linux/bcm27xx/patches-6.6/950-1475-misc-rp1-pio-Minor-cosmetic-tweaks.patch b/target/linux/bcm27xx/patches-6.6/950-1475-misc-rp1-pio-Minor-cosmetic-tweaks.patch
new file mode 100644
index 0000000000..73cbacb328
--- /dev/null
+++ b/target/linux/bcm27xx/patches-6.6/950-1475-misc-rp1-pio-Minor-cosmetic-tweaks.patch
@@ -0,0 +1,42 @@
+From 75203c6641cfe47dfb817b095430021b0981ff47 Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil at raspberrypi.com>
+Date: Tue, 10 Dec 2024 12:06:14 +0000
+Subject: [PATCH 1475/1482] misc: rp1-pio: Minor cosmetic tweaks
+
+No functional change.
+
+Signed-off-by: Phil Elwell <phil at raspberrypi.com>
+---
+ drivers/misc/rp1-pio.c | 7 +++----
+ 1 file changed, 3 insertions(+), 4 deletions(-)
+
+--- a/drivers/misc/rp1-pio.c
++++ b/drivers/misc/rp1-pio.c
+@@ -683,7 +683,7 @@ err_dma_free:
+ }
+
+ static int rp1_pio_sm_tx_user(struct rp1_pio_device *pio, struct dma_info *dma,
+- const void __user *userbuf, size_t bytes)
++ const void __user *userbuf, size_t bytes)
+ {
+ struct platform_device *pdev = pio->pdev;
+ struct dma_async_tx_descriptor *desc;
+@@ -757,7 +757,7 @@ static int rp1_pio_sm_tx_user(struct rp1
+ }
+
+ static int rp1_pio_sm_rx_user(struct rp1_pio_device *pio, struct dma_info *dma,
+- void __user *userbuf, size_t bytes)
++ void __user *userbuf, size_t bytes)
+ {
+ struct platform_device *pdev = pio->pdev;
+ struct dma_async_tx_descriptor *desc;
+@@ -809,8 +809,7 @@ static int rp1_pio_sm_rx_user(struct rp1
+ desc->callback = rp1_pio_sm_dma_callback;
+ desc->callback_param = dma;
+
+- // Submit the buffer - the callback will kick the semaphore
+-
++ /* Submit the buffer - the callback will kick the semaphore */
+ ret = dmaengine_submit(desc);
+ if (ret < 0)
+ break;
diff --git a/target/linux/bcm27xx/patches-6.6/950-1476-misc-rp1-pio-Add-in-kernel-DMA-support.patch b/target/linux/bcm27xx/patches-6.6/950-1476-misc-rp1-pio-Add-in-kernel-DMA-support.patch
new file mode 100644
index 0000000000..05c6de2b01
--- /dev/null
+++ b/target/linux/bcm27xx/patches-6.6/950-1476-misc-rp1-pio-Add-in-kernel-DMA-support.patch
@@ -0,0 +1,508 @@
+From fddd3e9318dbf01fb763b6880021abc558fce8e6 Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil at raspberrypi.com>
+Date: Thu, 12 Dec 2024 17:09:27 +0000
+Subject: [PATCH 1476/1482] misc: rp1-pio: Add in-kernel DMA support
+
+Add kernel-facing implementations of pio_sm_config_xfer and
+pio_xm_xfer_data.
+
+Signed-off-by: Phil Elwell <phil at raspberrypi.com>
+---
+ drivers/misc/rp1-pio.c | 208 ++++++++++++++++++++++++++++++----------
+ include/linux/pio_rp1.h | 60 ++++++++++--
+ 2 files changed, 210 insertions(+), 58 deletions(-)
+
+--- a/drivers/misc/rp1-pio.c
++++ b/drivers/misc/rp1-pio.c
+@@ -61,9 +61,15 @@
+ #define DMA_BOUNCE_BUFFER_SIZE 0x1000
+ #define DMA_BOUNCE_BUFFER_COUNT 4
+
++struct dma_xfer_state {
++ struct dma_info *dma;
++ void (*callback)(void *param);
++ void *callback_param;
++};
++
+ struct dma_buf_info {
+ void *buf;
+- dma_addr_t phys;
++ dma_addr_t dma_addr;
+ struct scatterlist sgl;
+ };
+
+@@ -572,21 +578,34 @@ static void rp1_pio_sm_dma_callback(void
+ up(&dma->buf_sem);
+ }
+
++static void rp1_pio_sm_kernel_dma_callback(void *param)
++{
++ struct dma_xfer_state *dxs = param;
++
++ dxs->dma->tail_idx++;
++ up(&dxs->dma->buf_sem);
++
++ dxs->callback(dxs->callback_param);
++
++ kfree(dxs);
++}
++
+ static void rp1_pio_sm_dma_free(struct device *dev, struct dma_info *dma)
+ {
+ dmaengine_terminate_all(dma->chan);
+ while (dma->buf_count > 0) {
+ dma->buf_count--;
+ dma_free_coherent(dev, ROUND_UP(dma->buf_size, PAGE_SIZE),
+- dma->bufs[dma->buf_count].buf, dma->bufs[dma->buf_count].phys);
++ dma->bufs[dma->buf_count].buf,
++ dma->bufs[dma->buf_count].dma_addr);
+ }
+
+ dma_release_channel(dma->chan);
+ }
+
+-static int rp1_pio_sm_config_xfer(struct rp1_pio_client *client, void *param)
++static int rp1_pio_sm_config_xfer_internal(struct rp1_pio_client *client, uint sm, uint dir,
++ uint buf_size, uint buf_count)
+ {
+- struct rp1_pio_sm_config_xfer_args *args = param;
+ struct rp1_pio_sm_set_dmactrl_args set_dmactrl_args;
+ struct rp1_pio_device *pio = client->pio;
+ struct platform_device *pdev = pio->pdev;
+@@ -596,17 +615,18 @@ static int rp1_pio_sm_config_xfer(struct
+ struct dma_info *dma;
+ uint32_t dma_mask;
+ char chan_name[4];
+- uint buf_size;
+ int ret = 0;
+
+- if (args->sm >= RP1_PIO_SMS_COUNT || args->dir >= RP1_PIO_DIR_COUNT ||
+- !args->buf_size || (args->buf_size & 3) ||
+- !args->buf_count || args->buf_count > DMA_BOUNCE_BUFFER_COUNT)
++ if (sm >= RP1_PIO_SMS_COUNT || dir >= RP1_PIO_DIR_COUNT)
++ return -EINVAL;
++ if ((buf_count || buf_size) &&
++ (!buf_size || (buf_size & 3) ||
++ !buf_count || buf_count > DMA_BOUNCE_BUFFER_COUNT))
+ return -EINVAL;
+
+- dma_mask = 1 << (args->sm * 2 + args->dir);
++ dma_mask = 1 << (sm * 2 + dir);
+
+- dma = &pio->dma_configs[args->sm][args->dir];
++ dma = &pio->dma_configs[sm][dir];
+
+ spin_lock(&pio->lock);
+ if (pio->claimed_dmas & dma_mask)
+@@ -615,16 +635,16 @@ static int rp1_pio_sm_config_xfer(struct
+ client->claimed_dmas |= dma_mask;
+ spin_unlock(&pio->lock);
+
+- dma->buf_size = args->buf_size;
++ dma->buf_size = buf_size;
+ /* Round up the allocations */
+- buf_size = ROUND_UP(args->buf_size, PAGE_SIZE);
++ buf_size = ROUND_UP(buf_size, PAGE_SIZE);
+ sema_init(&dma->buf_sem, 0);
+
+ /* Allocate and configure a DMA channel */
+ /* Careful - each SM FIFO has its own DREQ value */
+- chan_name[0] = (args->dir == RP1_PIO_DIR_TO_SM) ? 't' : 'r';
++ chan_name[0] = (dir == RP1_PIO_DIR_TO_SM) ? 't' : 'r';
+ chan_name[1] = 'x';
+- chan_name[2] = '0' + args->sm;
++ chan_name[2] = '0' + sm;
+ chan_name[3] = '\0';
+
+ dma->chan = dma_request_chan(dev, chan_name);
+@@ -632,37 +652,37 @@ static int rp1_pio_sm_config_xfer(struct
+ return PTR_ERR(dma->chan);
+
+ /* Alloc and map bounce buffers */
+- for (dma->buf_count = 0; dma->buf_count < args->buf_count; dma->buf_count++) {
++ for (dma->buf_count = 0; dma->buf_count < buf_count; dma->buf_count++) {
+ struct dma_buf_info *dbi = &dma->bufs[dma->buf_count];
+
+ dbi->buf = dma_alloc_coherent(dma->chan->device->dev, buf_size,
+- &dbi->phys, GFP_KERNEL);
++ &dbi->dma_addr, GFP_KERNEL);
+ if (!dbi->buf) {
+ ret = -ENOMEM;
+ goto err_dma_free;
+ }
+ sg_init_table(&dbi->sgl, 1);
+- sg_dma_address(&dbi->sgl) = dbi->phys;
++ sg_dma_address(&dbi->sgl) = dbi->dma_addr;
+ }
+
+ fifo_addr = pio->phys_addr;
+- fifo_addr += args->sm * (RP1_PIO_FIFO_TX1 - RP1_PIO_FIFO_TX0);
+- fifo_addr += (args->dir == RP1_PIO_DIR_TO_SM) ? RP1_PIO_FIFO_TX0 : RP1_PIO_FIFO_RX0;
++ fifo_addr += sm * (RP1_PIO_FIFO_TX1 - RP1_PIO_FIFO_TX0);
++ fifo_addr += (dir == RP1_PIO_DIR_TO_SM) ? RP1_PIO_FIFO_TX0 : RP1_PIO_FIFO_RX0;
+
+ config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ config.src_addr = fifo_addr;
+ config.dst_addr = fifo_addr;
+- config.direction = (args->dir == RP1_PIO_DIR_TO_SM) ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM;
++ config.direction = (dir == RP1_PIO_DIR_TO_SM) ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM;
+
+ ret = dmaengine_slave_config(dma->chan, &config);
+ if (ret)
+ goto err_dma_free;
+
+- set_dmactrl_args.sm = args->sm;
+- set_dmactrl_args.is_tx = (args->dir == RP1_PIO_DIR_TO_SM);
++ set_dmactrl_args.sm = sm;
++ set_dmactrl_args.is_tx = (dir == RP1_PIO_DIR_TO_SM);
+ set_dmactrl_args.ctrl = RP1_PIO_DMACTRL_DEFAULT;
+- if (args->dir == RP1_PIO_DIR_FROM_SM)
++ if (dir == RP1_PIO_DIR_FROM_SM)
+ set_dmactrl_args.ctrl = (RP1_PIO_DMACTRL_DEFAULT & ~0x1f) | 1;
+
+ ret = rp1_pio_sm_set_dmactrl(client, &set_dmactrl_args);
+@@ -682,6 +702,14 @@ err_dma_free:
+ return ret;
+ }
+
++static int rp1_pio_sm_config_xfer_user(struct rp1_pio_client *client, void *param)
++{
++ struct rp1_pio_sm_config_xfer_args *args = param;
++
++ return rp1_pio_sm_config_xfer_internal(client, args->sm, args->dir,
++ args->buf_size, args->buf_count);
++}
++
+ static int rp1_pio_sm_tx_user(struct rp1_pio_device *pio, struct dma_info *dma,
+ const void __user *userbuf, size_t bytes)
+ {
+@@ -723,7 +751,7 @@ static int rp1_pio_sm_tx_user(struct rp1
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK |
+ DMA_PREP_FENCE);
+ if (!desc) {
+- dev_err(dev, "DMA preparation failedzn");
++ dev_err(dev, "DMA preparation failed\n");
+ ret = -EIO;
+ break;
+ }
+@@ -779,7 +807,7 @@ static int rp1_pio_sm_rx_user(struct rp1
+ if (!bytes || dma->head_idx - dma->tail_idx == dma->buf_count) {
+ if (down_timeout(&dma->buf_sem,
+ msecs_to_jiffies(1000))) {
+- dev_err(dev, "DMA wait timed out");
++ dev_err(dev, "DMA wait timed out\n");
+ ret = -ETIMEDOUT;
+ break;
+ }
+@@ -801,7 +829,7 @@ static int rp1_pio_sm_rx_user(struct rp1
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK |
+ DMA_PREP_FENCE);
+ if (!desc) {
+- dev_err(dev, "DMA preparation failed");
++ dev_err(dev, "DMA preparation failed\n");
+ ret = -EIO;
+ break;
+ }
+@@ -823,7 +851,7 @@ static int rp1_pio_sm_rx_user(struct rp1
+ return ret;
+ }
+
+-static int rp1_pio_sm_xfer_data32(struct rp1_pio_client *client, void *param)
++static int rp1_pio_sm_xfer_data32_user(struct rp1_pio_client *client, void *param)
+ {
+ struct rp1_pio_sm_xfer_data32_args *args = param;
+ struct rp1_pio_device *pio = client->pio;
+@@ -841,7 +869,7 @@ static int rp1_pio_sm_xfer_data32(struct
+ return rp1_pio_sm_rx_user(pio, dma, args->data, args->data_bytes);
+ }
+
+-static int rp1_pio_sm_xfer_data(struct rp1_pio_client *client, void *param)
++static int rp1_pio_sm_xfer_data_user(struct rp1_pio_client *client, void *param)
+ {
+ struct rp1_pio_sm_xfer_data_args *args = param;
+ struct rp1_pio_sm_xfer_data32_args args32;
+@@ -851,17 +879,97 @@ static int rp1_pio_sm_xfer_data(struct r
+ args32.data_bytes = args->data_bytes;
+ args32.data = args->data;
+
+- return rp1_pio_sm_xfer_data32(client, &args32);
++ return rp1_pio_sm_xfer_data32_user(client, &args32);
++}
++
++int rp1_pio_sm_config_xfer(struct rp1_pio_client *client, uint sm, uint dir,
++ uint buf_size, uint buf_count)
++{
++ return rp1_pio_sm_config_xfer_internal(client, sm, dir, buf_size, buf_count);
++}
++EXPORT_SYMBOL_GPL(rp1_pio_sm_config_xfer);
++
++int rp1_pio_sm_xfer_data(struct rp1_pio_client *client, uint sm, uint dir,
++ uint data_bytes, void *data, dma_addr_t dma_addr,
++ void (*callback)(void *param), void *param)
++{
++ struct rp1_pio_device *pio = client->pio;
++ struct platform_device *pdev = pio->pdev;
++ struct dma_async_tx_descriptor *desc;
++ struct dma_xfer_state *dxs = NULL;
++ struct device *dev = &pdev->dev;
++ struct dma_buf_info *dbi = NULL;
++ struct scatterlist sg;
++ struct dma_info *dma;
++ int ret = 0;
++
++ if (sm >= RP1_PIO_SMS_COUNT || dir >= RP1_PIO_DIR_COUNT)
++ return -EINVAL;
++
++ dma = &pio->dma_configs[sm][dir];
++
++ if (!dma_addr) {
++ dxs = kmalloc(sizeof(*dxs), GFP_KERNEL);
++ dxs->dma = dma;
++ dxs->callback = callback;
++ dxs->callback_param = param;
++ callback = rp1_pio_sm_kernel_dma_callback;
++ param = dxs;
++
++ if (!dma->buf_count || data_bytes > dma->buf_size)
++ return -EINVAL;
++
++ /* Grab a dma buffer */
++ if (dma->head_idx - dma->tail_idx == dma->buf_count) {
++ if (down_timeout(&dma->buf_sem, msecs_to_jiffies(1000))) {
++ dev_err(dev, "DMA wait timed out\n");
++ return -ETIMEDOUT;
++ }
++ }
++
++ dbi = &dma->bufs[dma->head_idx % dma->buf_count];
++ dma_addr = dbi->dma_addr;
++
++ if (dir == PIO_DIR_TO_SM)
++ memcpy(dbi->buf, data, data_bytes);
++ }
++
++ sg_init_table(&sg, 1);
++ sg_dma_address(&sg) = dma_addr;
++ sg_dma_len(&sg) = data_bytes;
++
++ desc = dmaengine_prep_slave_sg(dma->chan, &sg, 1,
++ (dir == PIO_DIR_TO_SM) ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM,
++ DMA_PREP_INTERRUPT | DMA_CTRL_ACK |
++ DMA_PREP_FENCE);
++ if (!desc) {
++ dev_err(dev, "DMA preparation failed\n");
++ return -EIO;
++ }
++
++ desc->callback = callback;
++ desc->callback_param = param;
++
++ ret = dmaengine_submit(desc);
++ if (ret < 0) {
++ dev_err(dev, "dmaengine_submit failed (%d)\n", ret);
++ return ret;
++ }
++
++ dma_async_issue_pending(dma->chan);
++
++ return 0;
+ }
++EXPORT_SYMBOL_GPL(rp1_pio_sm_xfer_data);
+
+ struct handler_info {
+ const char *name;
+ int (*func)(struct rp1_pio_client *client, void *param);
+ int argsize;
+ } ioctl_handlers[] = {
+- HANDLER(SM_CONFIG_XFER, sm_config_xfer),
+- HANDLER(SM_XFER_DATA, sm_xfer_data),
+- HANDLER(SM_XFER_DATA32, sm_xfer_data32),
++ HANDLER(SM_CONFIG_XFER, sm_config_xfer_user),
++ HANDLER(SM_XFER_DATA, sm_xfer_data_user),
++ HANDLER(SM_XFER_DATA32, sm_xfer_data32_user),
+
+ HANDLER(CAN_ADD_PROGRAM, can_add_program),
+ HANDLER(ADD_PROGRAM, add_program),
+@@ -902,7 +1010,7 @@ struct handler_info {
+ HANDLER(WRITE_HW, write_hw),
+ };
+
+-struct rp1_pio_client *pio_open(void)
++struct rp1_pio_client *rp1_pio_open(void)
+ {
+ struct rp1_pio_client *client;
+
+@@ -914,9 +1022,9 @@ struct rp1_pio_client *pio_open(void)
+
+ return client;
+ }
+-EXPORT_SYMBOL_GPL(pio_open);
++EXPORT_SYMBOL_GPL(rp1_pio_open);
+
+-void pio_close(struct rp1_pio_client *client)
++void rp1_pio_close(struct rp1_pio_client *client)
+ {
+ struct rp1_pio_device *pio = client->pio;
+ uint claimed_dmas = client->claimed_dmas;
+@@ -958,31 +1066,31 @@ void pio_close(struct rp1_pio_client *cl
+
+ kfree(client);
+ }
+-EXPORT_SYMBOL_GPL(pio_close);
++EXPORT_SYMBOL_GPL(rp1_pio_close);
+
+-void pio_set_error(struct rp1_pio_client *client, int err)
++void rp1_pio_set_error(struct rp1_pio_client *client, int err)
+ {
+ client->error = err;
+ }
+-EXPORT_SYMBOL_GPL(pio_set_error);
++EXPORT_SYMBOL_GPL(rp1_pio_set_error);
+
+-int pio_get_error(const struct rp1_pio_client *client)
++int rp1_pio_get_error(const struct rp1_pio_client *client)
+ {
+ return client->error;
+ }
+-EXPORT_SYMBOL_GPL(pio_get_error);
++EXPORT_SYMBOL_GPL(rp1_pio_get_error);
+
+-void pio_clear_error(struct rp1_pio_client *client)
++void rp1_pio_clear_error(struct rp1_pio_client *client)
+ {
+ client->error = 0;
+ }
+-EXPORT_SYMBOL_GPL(pio_clear_error);
++EXPORT_SYMBOL_GPL(rp1_pio_clear_error);
+
+-static int rp1_pio_open(struct inode *inode, struct file *filp)
++static int rp1_pio_file_open(struct inode *inode, struct file *filp)
+ {
+ struct rp1_pio_client *client;
+
+- client = pio_open();
++ client = rp1_pio_open();
+ if (IS_ERR(client))
+ return PTR_ERR(client);
+
+@@ -991,11 +1099,11 @@ static int rp1_pio_open(struct inode *in
+ return 0;
+ }
+
+-static int rp1_pio_release(struct inode *inode, struct file *filp)
++static int rp1_pio_file_release(struct inode *inode, struct file *filp)
+ {
+ struct rp1_pio_client *client = filp->private_data;
+
+- pio_close(client);
++ rp1_pio_close(client);
+
+ return 0;
+ }
+@@ -1082,7 +1190,7 @@ static long rp1_pio_compat_ioctl(struct
+ param.dir = compat_param.dir;
+ param.data_bytes = compat_param.data_bytes;
+ param.data = compat_ptr(compat_param.data);
+- return rp1_pio_sm_xfer_data(client, ¶m);
++ return rp1_pio_sm_xfer_data_user(client, ¶m);
+ }
+ case PIO_IOC_SM_XFER_DATA32_COMPAT:
+ {
+@@ -1095,7 +1203,7 @@ static long rp1_pio_compat_ioctl(struct
+ param.dir = compat_param.dir;
+ param.data_bytes = compat_param.data_bytes;
+ param.data = compat_ptr(compat_param.data);
+- return rp1_pio_sm_xfer_data32(client, ¶m);
++ return rp1_pio_sm_xfer_data32_user(client, ¶m);
+ }
+
+ case PIO_IOC_READ_HW_COMPAT:
+@@ -1124,8 +1232,8 @@ static long rp1_pio_compat_ioctl(struct
+
+ const struct file_operations rp1_pio_fops = {
+ .owner = THIS_MODULE,
+- .open = rp1_pio_open,
+- .release = rp1_pio_release,
++ .open = rp1_pio_file_open,
++ .release = rp1_pio_file_release,
+ .unlocked_ioctl = rp1_pio_ioctl,
+ .compat_ioctl = rp1_pio_compat_ioctl,
+ };
+--- a/include/linux/pio_rp1.h
++++ b/include/linux/pio_rp1.h
+@@ -179,9 +179,17 @@ typedef rp1_pio_sm_config pio_sm_config;
+
+ typedef struct rp1_pio_client *PIO;
+
+-void pio_set_error(struct rp1_pio_client *client, int err);
+-int pio_get_error(const struct rp1_pio_client *client);
+-void pio_clear_error(struct rp1_pio_client *client);
++int rp1_pio_init(void);
++PIO rp1_pio_open(void);
++void rp1_pio_close(struct rp1_pio_client *client);
++void rp1_pio_set_error(struct rp1_pio_client *client, int err);
++int rp1_pio_get_error(const struct rp1_pio_client *client);
++void rp1_pio_clear_error(struct rp1_pio_client *client);
++int rp1_pio_sm_config_xfer(struct rp1_pio_client *client, uint sm, uint dir,
++ uint buf_size, uint buf_count);
++int rp1_pio_sm_xfer_data(struct rp1_pio_client *client, uint sm, uint dir,
++ uint data_bytes, void *data, dma_addr_t dma_addr,
++ void (*callback)(void *param), void *param);
+
+ int rp1_pio_can_add_program(struct rp1_pio_client *client, void *param);
+ int rp1_pio_add_program(struct rp1_pio_client *client, void *param);
+@@ -215,12 +223,48 @@ int rp1_pio_gpio_set_oeover(struct rp1_p
+ int rp1_pio_gpio_set_input_enabled(struct rp1_pio_client *client, void *param);
+ int rp1_pio_gpio_set_drive_strength(struct rp1_pio_client *client, void *param);
+
+-int pio_init(void);
+-PIO pio_open(void);
+-void pio_close(PIO pio);
++static inline int pio_init(void)
++{
++ return rp1_pio_init();
++}
++
++static inline struct rp1_pio_client *pio_open(void)
++{
++ return rp1_pio_open();
++}
++
++static inline void pio_close(struct rp1_pio_client *client)
++{
++ rp1_pio_close(client);
++}
++
++static inline void pio_set_error(struct rp1_pio_client *client, int err)
++{
++ rp1_pio_set_error(client, err);
++}
+
+-int pio_sm_config_xfer(PIO pio, uint sm, uint dir, uint buf_size, uint buf_count);
+-int pio_sm_xfer_data(PIO pio, uint sm, uint dir, uint data_bytes, void *data);
++static inline int pio_get_error(const struct rp1_pio_client *client)
++{
++ return rp1_pio_get_error(client);
++}
++
++static inline void pio_clear_error(struct rp1_pio_client *client)
++{
++ rp1_pio_clear_error(client);
++}
++
++static inline int pio_sm_config_xfer(struct rp1_pio_client *client, uint sm, uint dir,
++ uint buf_size, uint buf_count)
++{
++ return rp1_pio_sm_config_xfer(client, sm, dir, buf_size, buf_count);
++}
++
++static inline int pio_sm_xfer_data(struct rp1_pio_client *client, uint sm, uint dir,
++ uint data_bytes, void *data, dma_addr_t dma_addr,
++ void (*callback)(void *param), void *param)
++{
++ return rp1_pio_sm_xfer_data(client, sm, dir, data_bytes, data, dma_addr, callback, param);
++}
+
+ static inline struct fp24_8 make_fp24_8(uint mul, uint div)
+ {
diff --git a/target/linux/bcm27xx/patches-6.6/950-1477-misc-Add-ws2812-pio-rp1-driver.patch b/target/linux/bcm27xx/patches-6.6/950-1477-misc-Add-ws2812-pio-rp1-driver.patch
new file mode 100644
index 0000000000..469a8a9b91
--- /dev/null
+++ b/target/linux/bcm27xx/patches-6.6/950-1477-misc-Add-ws2812-pio-rp1-driver.patch
@@ -0,0 +1,568 @@
+From d6d83ad3d9a3a594909a1ad1c82b735ab711cd12 Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil at raspberrypi.com>
+Date: Tue, 3 Dec 2024 16:09:30 +0000
+Subject: [PATCH 1477/1482] misc: Add ws2812-pio-rp1 driver
+
+ws2812-pio-rp1 is a PIO-based driver for WS2812 LEDS. It creates a
+character device in /dev, the default name of which is /dev/leds<n>,
+where <n> is the instance number. The number of LEDS should be set
+in the DT overlay, as should whether it is RGB or RGBW, and the default
+brightness.
+
+Write data to the /dev/* entry in a 4 bytes-per-pixel format in RGBW
+order:
+
+ RR GG BB WW RR GG BB WW ...
+
+The white values are ignored unless the rgbw flag is set for the device.
+
+To change the brightness, write a single byte to offset 0, 255 being
+full brightness and 0 being off.
+
+Signed-off-by: Phil Elwell <phil at raspberrypi.com>
+---
+ drivers/misc/Kconfig | 10 +
+ drivers/misc/Makefile | 1 +
+ drivers/misc/ws2812-pio-rp1.c | 507 ++++++++++++++++++++++++++++++++++
+ 3 files changed, 518 insertions(+)
+ create mode 100644 drivers/misc/ws2812-pio-rp1.c
+
+--- a/drivers/misc/Kconfig
++++ b/drivers/misc/Kconfig
+@@ -25,6 +25,16 @@ config RP1_PIO
+ Driver providing control of the Raspberry Pi PIO block, as found in
+ RP1.
+
++config WS2812_PIO_RP1
++ tristate "Raspberry Pi PIO-base WS2812 driver"
++ depends on RP1_PIO || COMPILE_TEST
++ default n
++ help
++ Driver for the WS2812 (NeoPixel) LEDs using the RP1 PIO hardware.
++ The driver creates a character device to which rgbw pixels may be
++ written. Single-byte writes to offset 0 set the brightness at
++ runtime.
++
+ config AD525X_DPOT
+ tristate "Analog Devices Digital Potentiometers"
+ depends on (I2C || SPI) && SYSFS
+--- a/drivers/misc/Makefile
++++ b/drivers/misc/Makefile
+@@ -19,6 +19,7 @@ obj-$(CONFIG_PHANTOM) += phantom.o
+ obj-$(CONFIG_QCOM_COINCELL) += qcom-coincell.o
+ obj-$(CONFIG_QCOM_FASTRPC) += fastrpc.o
+ obj-$(CONFIG_RP1_PIO) += rp1-pio.o
++obj-$(CONFIG_WS2812_PIO_RP1) += ws2812-pio-rp1.o
+ obj-$(CONFIG_SENSORS_BH1770) += bh1770glc.o
+ obj-$(CONFIG_SENSORS_APDS990X) += apds990x.o
+ obj-$(CONFIG_ENCLOSURE_SERVICES) += enclosure.o
+--- /dev/null
++++ b/drivers/misc/ws2812-pio-rp1.c
+@@ -0,0 +1,507 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Raspberry Pi PIO-based WS2812 driver
++ *
++ * Copyright (C) 2014-2024 Raspberry Pi Ltd.
++ *
++ * Author: Phil Elwell (phil at raspberrypi.com)
++ *
++ * Based on the ws2812 driver by Gordon Hollingworth <gordon at raspberrypi.com>
++ */
++
++#include <linux/cdev.h>
++#include <linux/delay.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/fcntl.h>
++#include <linux/file.h>
++#include <linux/fs.h>
++#include <linux/pio_rp1.h>
++#include <linux/platform_device.h>
++#include <linux/of.h>
++#include <linux/gpio/consumer.h>
++
++#define DRIVER_NAME "ws2812-pio-rp1"
++#define MAX_INSTANCES 4
++
++#define RESET_US 50
++#define PIXEL_BYTES 4
++
++struct ws2812_pio_rp1_state {
++ struct device *dev;
++ struct gpio_desc *gpiod;
++ struct gpio_desc *power_gpiod;
++ uint gpio;
++ PIO pio;
++ uint sm;
++ uint offset;
++
++ u8 *buffer;
++ u8 *pixbuf;
++ u32 pixbuf_size;
++ u32 write_end;
++
++ u8 brightness;
++ u32 invert;
++ u32 num_leds;
++ u32 xfer_end_us;
++ bool is_rgbw;
++ struct delayed_work deferred_work;
++
++ struct completion dma_completion;
++ struct cdev cdev;
++ dev_t dev_num;
++ const char *dev_name;
++};
++
++static DEFINE_MUTEX(ws2812_pio_mutex);
++static DEFINE_IDA(ws2812_pio_ida);
++static long ws2812_pio_ref_count;
++static struct class *ws2812_pio_class;
++static dev_t ws2812_pio_dev_num;
++/*
++ * WS2812B gamma correction
++ * GammaE=255*(res/255).^(1/.45)
++ * From: http://rgb-123.com/ws2812-color-output/
++ */
++
++static const u8 ws2812_gamma[] = {
++ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
++ 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 2, 2, 2,
++ 2, 2, 2, 3, 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5,
++ 6, 6, 6, 7, 7, 7, 8, 8, 8, 9, 9, 9, 10, 10, 11, 11,
++ 11, 12, 12, 13, 13, 13, 14, 14, 15, 15, 16, 16, 17, 17, 18, 18,
++ 19, 19, 20, 21, 21, 22, 22, 23, 23, 24, 25, 25, 26, 27, 27, 28,
++ 29, 29, 30, 31, 31, 32, 33, 34, 34, 35, 36, 37, 37, 38, 39, 40,
++ 40, 41, 42, 43, 44, 45, 46, 46, 47, 48, 49, 50, 51, 52, 53, 54,
++ 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70,
++ 71, 72, 73, 74, 76, 77, 78, 79, 80, 81, 83, 84, 85, 86, 88, 89,
++ 90, 91, 93, 94, 95, 96, 98, 99, 100, 102, 103, 104, 106, 107, 109, 110,
++ 111, 113, 114, 116, 117, 119, 120, 121, 123, 124, 126, 128, 129, 131, 132, 134,
++ 135, 137, 138, 140, 142, 143, 145, 146, 148, 150, 151, 153, 155, 157, 158, 160,
++ 162, 163, 165, 167, 169, 170, 172, 174, 176, 178, 179, 181, 183, 185, 187, 189,
++ 191, 193, 194, 196, 198, 200, 202, 204, 206, 208, 210, 212, 214, 216, 218, 220,
++ 222, 224, 227, 229, 231, 233, 235, 237, 239, 241, 244, 246, 248, 250, 252, 255
++};
++
++// ------ //
++// ws2812 //
++// ------ //
++
++#define ws2812_wrap_target 0
++#define ws2812_wrap 3
++
++#define ws2812_T1 3
++#define ws2812_T2 4
++#define ws2812_T3 3
++
++static const uint16_t ws2812_program_instructions[] = {
++ // .wrap_target
++ 0x6221, // 0: out x, 1 side 0 [2]
++ 0x1223, // 1: jmp !x, 3 side 1 [2]
++ 0x1300, // 2: jmp 0 side 1 [3]
++ 0xa342, // 3: nop side 0 [3]
++ // .wrap
++};
++
++static const struct pio_program ws2812_program = {
++ .instructions = ws2812_program_instructions,
++ .length = 4,
++ .origin = -1,
++};
++
++static inline pio_sm_config ws2812_program_get_default_config(uint offset)
++{
++ pio_sm_config c = pio_get_default_sm_config();
++
++ sm_config_set_wrap(&c, offset + ws2812_wrap_target, offset + ws2812_wrap);
++ sm_config_set_sideset(&c, 1, false, false);
++ return c;
++}
++
++static inline void ws2812_program_init(PIO pio, uint sm, uint offset, uint pin, uint freq,
++ bool rgbw)
++{
++ int cycles_per_bit = ws2812_T1 + ws2812_T2 + ws2812_T3;
++ struct fp24_8 div;
++ pio_sm_config c;
++
++ pio_gpio_init(pio, pin);
++ pio_sm_set_consecutive_pindirs(pio, sm, pin, 1, true);
++ c = ws2812_program_get_default_config(offset);
++ sm_config_set_sideset_pins(&c, pin);
++ sm_config_set_out_shift(&c, false, true, rgbw ? 32 : 24);
++ sm_config_set_fifo_join(&c, PIO_FIFO_JOIN_TX);
++ div = make_fp24_8(clock_get_hz(clk_sys), freq * cycles_per_bit);
++ sm_config_set_clkdiv(&c, div);
++ pio_sm_init(pio, sm, offset, &c);
++ pio_sm_set_enabled(pio, sm, true);
++}
++
++static uint8_t ws2812_apply_gamma(uint8_t brightness, uint8_t val)
++{
++ int bright;
++
++ if (!val)
++ return 0;
++ bright = (val * brightness) / 255;
++ return ws2812_gamma[bright];
++}
++
++static inline uint8_t *rgbw_u32(const struct ws2812_pio_rp1_state *state,
++ uint8_t r, uint8_t g, uint8_t b, uint8_t w, uint8_t *p)
++{
++ p[0] = ws2812_apply_gamma(state->brightness, w);
++ p[1] = ws2812_apply_gamma(state->brightness, b);
++ p[2] = ws2812_apply_gamma(state->brightness, r);
++ p[3] = ws2812_apply_gamma(state->brightness, g);
++ return p + 4;
++}
++
++static void ws2812_dma_complete(void *param)
++{
++ struct ws2812_pio_rp1_state *state = param;
++
++ complete(&state->dma_completion);
++}
++
++static void ws2812_update_leds(struct ws2812_pio_rp1_state *state, uint length)
++{
++ init_completion(&state->dma_completion);
++ if (!pio_sm_xfer_data(state->pio, state->sm, PIO_DIR_TO_SM, length, state->buffer, 0,
++ (void (*)(void *))ws2812_dma_complete, state)) {
++ wait_for_completion(&state->dma_completion);
++ usleep_range(RESET_US, RESET_US + 100);
++ }
++}
++
++static void ws2812_clear_leds(struct ws2812_pio_rp1_state *state)
++{
++ uint8_t *p_buffer;
++ uint length;
++ int i;
++
++ p_buffer = state->buffer;
++ for (i = 0; i < state->num_leds; i++)
++ p_buffer = rgbw_u32(state, 0, 0, 0, 0, p_buffer);
++
++ length = (void *)p_buffer - (void *)state->buffer;
++
++ ws2812_update_leds(state, length);
++}
++
++/*
++ * Function to write the RGB buffer to the WS2812 leds, the input buffer
++ * contains a sequence of up to num_leds RGB32 integers, these are then
++ * gamma-corrected before being sent to the PIO state machine.
++ */
++
++static ssize_t ws2812_pio_rp1_write(struct file *filp, const char __user *buf, size_t count,
++ loff_t *ppos)
++{
++ struct ws2812_pio_rp1_state *state;
++ uint32_t pixbuf_size;
++ unsigned long delay;
++ loff_t pos = *ppos;
++ int err = 0;
++
++ state = (struct ws2812_pio_rp1_state *)filp->private_data;
++ pixbuf_size = state->pixbuf_size;
++
++ if (pos > pixbuf_size)
++ return -EFBIG;
++
++ if (count > pixbuf_size) {
++ err = -EFBIG;
++ count = pixbuf_size;
++ }
++
++ if (pos + count > pixbuf_size) {
++ if (!err)
++ err = -ENOSPC;
++
++ count = pixbuf_size - pos;
++ }
++
++ if (!pos && count == 1) {
++ if (copy_from_user(&state->brightness, buf, 1))
++ return -EFAULT;
++ } else {
++ if (copy_from_user(state->pixbuf + pos, buf, count))
++ return -EFAULT;
++ pos += count;
++ state->write_end = (u32)pos;
++ }
++
++ *ppos = pos;
++
++ delay = (state->write_end == pixbuf_size) ? 0 : HZ / 20;
++ schedule_delayed_work(&state->deferred_work, delay);
++
++ return err ? err : count;
++}
++
++static void ws2812_pio_rp1_deferred_work(struct work_struct *work)
++{
++ struct ws2812_pio_rp1_state *state =
++ container_of(work, struct ws2812_pio_rp1_state, deferred_work.work);
++ uint8_t *p_buffer;
++ uint32_t *p_rgb;
++ int blank_bytes;
++ uint length;
++ int i;
++
++ blank_bytes = state->pixbuf_size - state->write_end;
++ if (blank_bytes > 0)
++ memset(state->pixbuf + state->write_end, 0, blank_bytes);
++
++ p_rgb = (uint32_t *)state->pixbuf;
++ p_buffer = state->buffer;
++
++ for (i = 0; i < state->num_leds; i++) {
++ uint32_t rgbw_pix = *(p_rgb++);
++
++ p_buffer = rgbw_u32(state,
++ (uint8_t)(rgbw_pix >> 0),
++ (uint8_t)(rgbw_pix >> 8),
++ (uint8_t)(rgbw_pix >> 16),
++ (uint8_t)(rgbw_pix >> 24),
++ p_buffer);
++ }
++
++ length = (void *)p_buffer - (void *)state->buffer;
++
++ ws2812_update_leds(state, length);
++}
++
++static int ws2812_pio_rp1_open(struct inode *inode, struct file *file)
++{
++ struct ws2812_pio_rp1_state *state;
++
++ state = container_of(inode->i_cdev, struct ws2812_pio_rp1_state, cdev);
++ file->private_data = state;
++
++ return 0;
++}
++
++const struct file_operations ws2812_pio_rp1_fops = {
++ .owner = THIS_MODULE,
++ .write = ws2812_pio_rp1_write,
++ .open = ws2812_pio_rp1_open,
++};
++
++/*
++ * Probe function
++ */
++static int ws2812_pio_rp1_probe(struct platform_device *pdev)
++{
++ struct device_node *np = pdev->dev.of_node;
++ struct of_phandle_args of_args = { 0 };
++ struct ws2812_pio_rp1_state *state;
++ struct device *dev = &pdev->dev;
++ struct device *char_dev;
++ const char *dev_name;
++ uint32_t brightness;
++ bool is_rp1;
++ int minor;
++ int ret;
++
++ state = devm_kzalloc(dev, sizeof(*state), GFP_KERNEL);
++ if (IS_ERR(state))
++ return PTR_ERR(state);
++
++ state->dev = dev;
++
++ platform_set_drvdata(pdev, state);
++
++ ret = of_property_read_u32(np, "rpi,num-leds", &state->num_leds);
++ if (ret)
++ return dev_err_probe(dev, ret, "Could not get num-leds\n");
++
++ brightness = 255;
++ of_property_read_u32(np, "rpi,brightness", &brightness);
++ state->brightness = min(brightness, 255);
++
++ state->pixbuf_size = state->num_leds * PIXEL_BYTES;
++
++ state->is_rgbw = of_property_read_bool(np, "rpi,rgbw");
++ state->gpiod = devm_gpiod_get(dev, "leds", GPIOD_ASIS);
++ if (IS_ERR(state->gpiod))
++ return dev_err_probe(dev, PTR_ERR(state->gpiod),
++ "Could not get a gpio\n");
++
++ /* This must be an RP1 GPIO in the first bank, and retrieve the offset. */
++ /* Unfortunately I think this has to be done by parsing the gpios property */
++
++ /* This really shouldn't fail, given that we have a gpiod */
++ if (of_parse_phandle_with_args(np, "leds-gpios", "#gpio-cells", 0, &of_args))
++ return dev_err_probe(dev, -EINVAL,
++ "Can't find gpio declaration\n");
++
++ is_rp1 = of_device_is_compatible(of_args.np, "raspberrypi,rp1-gpio");
++ of_node_put(of_args.np);
++ if (!is_rp1 || of_args.args_count != 2)
++ return dev_err_probe(dev, -EINVAL,
++ "Not an RP1 gpio\n");
++
++ state->gpio = of_args.args[0];
++
++ state->pixbuf = devm_kmalloc(dev, state->pixbuf_size, GFP_KERNEL);
++ if (state->pixbuf == NULL)
++ return -ENOMEM;
++
++ state->buffer = devm_kmalloc(dev, state->num_leds * PIXEL_BYTES, GFP_KERNEL);
++ if (state->buffer == NULL)
++ return -ENOMEM;
++
++ ret = of_property_read_string(np, "dev-name", &dev_name);
++ if (ret) {
++ pr_err("Failed to read 'dev-name' property\n");
++ return ret;
++ }
++
++ state->pio = pio_open();
++ if (IS_ERR(state->pio))
++ return dev_err_probe(dev, PTR_ERR(state->pio),
++ "Could not open PIO\n");
++
++ state->sm = pio_claim_unused_sm(state->pio, false);
++ if ((int)state->sm < 0) {
++ dev_err(dev, "No free PIO SM\n");
++ ret = -EBUSY;
++ goto fail_pio;
++ }
++
++ state->offset = pio_add_program(state->pio, &ws2812_program);
++ if (state->offset == PIO_ORIGIN_ANY) {
++ dev_err(dev, "Not enough PIO program space\n");
++ ret = -EBUSY;
++ goto fail_pio;
++ }
++
++ pio_sm_config_xfer(state->pio, state->sm, PIO_DIR_TO_SM, state->num_leds * sizeof(int), 1);
++
++ pio_sm_clear_fifos(state->pio, state->sm);
++ pio_sm_set_clkdiv(state->pio, state->sm, make_fp24_8(1, 1));
++ ws2812_program_init(state->pio, state->sm, state->offset, state->gpio, 800000,
++ state->is_rgbw);
++
++ mutex_lock(&ws2812_pio_mutex);
++
++ if (!ws2812_pio_ref_count) {
++ ret = alloc_chrdev_region(&ws2812_pio_dev_num, 0, MAX_INSTANCES, DRIVER_NAME);
++ if (ret < 0) {
++ dev_err(dev, "alloc_chrdev_region failed (rc=%d)\n", ret);
++ goto fail_mutex;
++ }
++
++ ws2812_pio_class = class_create(DRIVER_NAME);
++ if (IS_ERR(ws2812_pio_class)) {
++ pr_err("Unable to create class " DRIVER_NAME "\n");
++ ret = PTR_ERR(ws2812_pio_class);
++ goto fail_chrdev;
++ }
++ }
++
++ ws2812_pio_ref_count++;
++
++ minor = ida_alloc_range(&ws2812_pio_ida, 0, MAX_INSTANCES - 1, GFP_KERNEL);
++ if (minor < 0) {
++ pr_err("No free instances\n");
++ ret = minor;
++ goto fail_class;
++
++ }
++
++ mutex_unlock(&ws2812_pio_mutex);
++
++ state->dev_num = MKDEV(MAJOR(ws2812_pio_dev_num), minor);
++ state->dev_name = devm_kasprintf(dev, GFP_KERNEL, dev_name, minor);
++
++ char_dev = device_create(ws2812_pio_class, NULL, state->dev_num, NULL, state->dev_name);
++
++ if (IS_ERR(char_dev)) {
++ pr_err("Unable to create device %s\n", state->dev_name);
++ ret = PTR_ERR(char_dev);
++ goto fail_ida;
++ }
++
++ state->cdev.owner = THIS_MODULE;
++ cdev_init(&state->cdev, &ws2812_pio_rp1_fops);
++
++ ret = cdev_add(&state->cdev, state->dev_num, 1);
++ if (ret) {
++ pr_err("cdev_add failed\n");
++ goto fail_device;
++ }
++
++ INIT_DELAYED_WORK(&state->deferred_work, ws2812_pio_rp1_deferred_work);
++
++ ws2812_clear_leds(state);
++
++ dev_info(&pdev->dev, "Instantiated %d LEDs on GPIO %d as /dev/%s\n",
++ state->num_leds, state->gpio, state->dev_name);
++
++ return 0;
++
++fail_device:
++ device_destroy(ws2812_pio_class, state->dev_num);
++fail_ida:
++ mutex_lock(&ws2812_pio_mutex);
++ ida_free(&ws2812_pio_ida, minor);
++fail_class:
++ ws2812_pio_ref_count--;
++ if (ws2812_pio_ref_count)
++ goto fail_mutex;
++ class_destroy(ws2812_pio_class);
++fail_chrdev:
++ unregister_chrdev_region(ws2812_pio_dev_num, MAX_INSTANCES);
++fail_mutex:
++ mutex_unlock(&ws2812_pio_mutex);
++fail_pio:
++ pio_close(state->pio);
++
++ return ret;
++}
++
++static void ws2812_pio_rp1_remove(struct platform_device *pdev)
++{
++ struct ws2812_pio_rp1_state *state = platform_get_drvdata(pdev);
++
++ cancel_delayed_work(&state->deferred_work);
++ platform_set_drvdata(pdev, NULL);
++
++ cdev_del(&state->cdev);
++ device_destroy(ws2812_pio_class, state->dev_num);
++
++ mutex_lock(&ws2812_pio_mutex);
++ ida_free(&ws2812_pio_ida, MINOR(state->dev_num));
++ ws2812_pio_ref_count--;
++ if (!ws2812_pio_ref_count) {
++ class_destroy(ws2812_pio_class);
++ unregister_chrdev_region(ws2812_pio_dev_num, MAX_INSTANCES);
++ }
++ mutex_unlock(&ws2812_pio_mutex);
++
++ pio_close(state->pio);
++}
++
++static const struct of_device_id ws2812_pio_rp1_match[] = {
++ { .compatible = "raspberrypi,ws2812-pio-rp1" },
++ { }
++};
++MODULE_DEVICE_TABLE(of, ws2812_pio_rp1_match);
++
++static struct platform_driver ws2812_pio_rp1_driver = {
++ .driver = {
++ .name = "ws2812-pio-rp1",
++ .of_match_table = ws2812_pio_rp1_match,
++ },
++ .probe = ws2812_pio_rp1_probe,
++ .remove_new = ws2812_pio_rp1_remove,
++};
++module_platform_driver(ws2812_pio_rp1_driver);
++
++MODULE_DESCRIPTION("WS2812 PIO RP1 driver");
++MODULE_AUTHOR("Phil Elwell");
++MODULE_LICENSE("GPL");
diff --git a/target/linux/bcm27xx/patches-6.6/950-1478-overlays-Add-ws2812-pio-overlay.patch b/target/linux/bcm27xx/patches-6.6/950-1478-overlays-Add-ws2812-pio-overlay.patch
new file mode 100644
index 0000000000..8e5051f385
--- /dev/null
+++ b/target/linux/bcm27xx/patches-6.6/950-1478-overlays-Add-ws2812-pio-overlay.patch
@@ -0,0 +1,107 @@
+From 4a8f2b39157825fefc505fe4b94f3a9ce101e170 Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil at raspberrypi.com>
+Date: Thu, 12 Dec 2024 23:23:39 +0000
+Subject: [PATCH 1478/1482] overlays: Add ws2812-pio overlay
+
+Add an overlay to enable a WS2812 LED driver on a given GPIO.
+
+Signed-off-by: Phil Elwell <phil at raspberrypi.com>
+---
+ arch/arm/boot/dts/overlays/Makefile | 3 +-
+ arch/arm/boot/dts/overlays/README | 22 +++++++++
+ .../boot/dts/overlays/ws2812-pio-overlay.dts | 46 +++++++++++++++++++
+ 3 files changed, 70 insertions(+), 1 deletion(-)
+ create mode 100644 arch/arm/boot/dts/overlays/ws2812-pio-overlay.dts
+
+--- a/arch/arm/boot/dts/overlays/Makefile
++++ b/arch/arm/boot/dts/overlays/Makefile
+@@ -337,7 +337,8 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
+ waveshare-can-fd-hat-mode-a.dtbo \
+ waveshare-can-fd-hat-mode-b.dtbo \
+ wittypi.dtbo \
+- wm8960-soundcard.dtbo
++ wm8960-soundcard.dtbo \
++ ws2812-pio.dtbo
+
+ targets += dtbs dtbs_install
+ targets += $(dtbo-y)
+--- a/arch/arm/boot/dts/overlays/README
++++ b/arch/arm/boot/dts/overlays/README
+@@ -5487,6 +5487,28 @@ Params: alsaname Changes
+ compatible Changes the codec compatibility
+
+
++Name: ws2812-pio
++Info: Configures a GPIO pin to drive a string of WS2812 LEDS using pio. It
++ can be enabled on any RP1 GPIO in bank 0 (0-27). Up to 4 are supported,
++ assuming nothing else is using PIO. Pi 5 only.
++Load: dtoverlay=ws2812-pio,<param>=<val>
++Params: brightness Set the initial brightness for the LEDs. The
++ brightness can be changed at runtime by writing
++ a single byte to offset 0 of the device. Note
++ that brightness is a multiplier for the pixel
++ values, and only white pixels can reach the
++ maximum visible brightness. (range 0-255,
++ default 255)
++ dev_name The name for the /dev/ device entry. Note that
++ if the name includes '%d' it will be replaced
++ by the instance number. (default 'leds%d')
++ gpio Output GPIO (0-27, default 4)
++ num_leds Number of LEDs (default 60)
++ rgbw 'rgbw=on' (or 'rgbw') indicates that each pixel
++ includes a white LED as well as the usual red,
++ green and blue. (default 'off')
++
++
+ Troubleshooting
+ ===============
+
+--- /dev/null
++++ b/arch/arm/boot/dts/overlays/ws2812-pio-overlay.dts
+@@ -0,0 +1,46 @@
++// SPDX-License-Identifier: GPL-2.0
++// Device tree overlay for RP1 PIO WS2812 driver.
++/dts-v1/;
++/plugin/;
++
++/ {
++ compatible = "brcm,bcm2712";
++
++ fragment at 0 {
++ target = <&gpio>;
++ __overlay__ {
++ ws2812_pio_pins: ws2812_pio_pins at 4 {
++ brcm,pins = <4>; /* gpio 4 */
++ function = "pio";
++ bias-disable;
++ };
++ };
++ };
++
++ fragment at 1 {
++ target-path = "/";
++ __overlay__ {
++ ws2812_pio: ws2812_pio at 4 {
++ compatible = "raspberrypi,ws2812-pio-rp1";
++ pinctrl-names = "default";
++ pinctrl-0 = <&ws2812_pio_pins>;
++ dev-name = "leds%d";
++ leds-gpios = <&gpio 4 0>;
++ rpi,num-leds = <60>;
++ rpi,brightness = <255>;
++ };
++ };
++ };
++
++ __overrides__ {
++ brightness = <&ws2812_pio>, "rpi,brightness:0";
++ dev_name = <&ws2812_pio>, "dev-name";
++ gpio = <&ws2812_pio>,"leds-gpios:4",
++ <&ws2812_pio_pins>,"brcm,pins:0",
++ /* modify reg values to allow multiple instantiation */
++ <&ws2812_pio>,"reg:0",
++ <&ws2812_pio_pins>,"reg:0";
++ num_leds = <&ws2812_pio>, "rpi,num-leds:0";
++ rgbw = <&ws2812_pio>, "rpi,rgbw?";
++ };
++};
More information about the lede-commits
mailing list