[openwrt/openwrt] lantiq/xrx200: move 8M flash devices to a small flash subtarget
LEDE Commits
lede-commits at lists.infradead.org
Sun Dec 15 16:05:47 PST 2024
hauke pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/e63326e26a82cb083eec602b3a2f71d4cd8e2ea4
commit e63326e26a82cb083eec602b3a2f71d4cd8e2ea4
Author: Andrew MacIntyre <andymac at pcug.org.au>
AuthorDate: Fri Nov 29 17:06:02 2024 +1100
lantiq/xrx200: move 8M flash devices to a small flash subtarget
Images for xrx200 8M flash are either not building due to image
size (TD-W8970, TD-W8980) or building such that the available
free space in the overlayfs is too little to be useful.
To keep images for these devices buildable, move them into a
small flash variant of the xrx200 subtarget. As these devices
are NOR flash only, remove NAND and UBI references from the
kernel config to gain some additional image size reduction.
The apparent 8M flash devices Arcadyan VGV7510KW22-brn,
Arcadyan VGV7519-brn and Lantiq Easy80920-nor seem to exist in
order to create special "factory" installation images for these
devices (which actually have larger flash: 16MB for the
Arcardyan devices; 64MB for the Lantiq device). As a
considerable amount of surgery would appear to be required to
the uboot-lantiq package structure to separate the "factory"
from the "sysupgrade" device recipes for these devices they
remain in the xrx200 target - if factory images aren't now
created, 23.05.x factory images should suffice for initial
installation.
Tested on: Netgear DM200, TP-Link TD-W8980,
AVM Fritz7490 (xrx200 subtarget: image build only)
Fixes: https://github.com/openwrt/openwrt/issues/16761
Signed-off-by: Andrew MacIntyre <andymac at pcug.org.au>
Link: https://github.com/openwrt/openwrt/pull/17113
Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
---
.../lantiq/dsl-vrx200-firmware-xdsl/Makefile | 8 +-
package/kernel/lantiq/ltq-atm/Makefile | 2 +-
package/kernel/lantiq/ltq-deu/Makefile | 8 +-
package/kernel/lantiq/ltq-ptm/Makefile | 10 +--
package/kernel/lantiq/ltq-vdsl-fw/Makefile | 2 +-
package/kernel/lantiq/ltq-vdsl-vr9-mei/Makefile | 4 +-
package/kernel/lantiq/ltq-vdsl-vr9/Makefile | 2 +-
package/kernel/lantiq/ltq-vectoring/Makefile | 4 +-
package/network/config/ltq-vdsl-vr9-app/Makefile | 2 +-
target/linux/lantiq/Makefile | 2 +-
target/linux/lantiq/image/Makefile | 6 ++
target/linux/lantiq/image/tp-link.mk | 28 -------
.../lantiq/image/{tp-link.mk => tp-link_legacy.mk} | 28 -------
target/linux/lantiq/image/vr9.mk | 37 ----------
target/linux/lantiq/image/vr9_legacy.mk | 43 +++++++++++
.../lantiq/xrx200/base-files/etc/board.d/01_leds | 3 -
.../xrx200/base-files/etc/board.d/02_network | 22 +-----
.../etc/hotplug.d/firmware/12-ath9k-eeprom | 4 -
.../base-files/etc/uci-defaults/01_led_migration | 2 -
.../xrx200_legacy/base-files/etc/board.d/01_leds | 34 +++++++++
.../base-files/etc/board.d/02_network | 75 +++++++++++++++++++
.../base-files/etc/board.d/05_compat-version | 18 +++++
.../etc/hotplug.d/firmware/12-ath9k-eeprom | 23 ++++++
.../base-files/etc/uci-defaults/01_led_migration | 5 +-
.../base-files/lib/upgrade/platform.sh | 16 ++++
target/linux/lantiq/xrx200_legacy/config-6.6 | 86 ++++++++++++++++++++++
.../lantiq/xrx200_legacy/profiles/00-default.mk | 9 +++
target/linux/lantiq/xrx200_legacy/target.mk | 22 ++++++
28 files changed, 356 insertions(+), 149 deletions(-)
diff --git a/package/firmware/lantiq/dsl-vrx200-firmware-xdsl/Makefile b/package/firmware/lantiq/dsl-vrx200-firmware-xdsl/Makefile
index 37db950bea..b6e1d11efc 100644
--- a/package/firmware/lantiq/dsl-vrx200-firmware-xdsl/Makefile
+++ b/package/firmware/lantiq/dsl-vrx200-firmware-xdsl/Makefile
@@ -40,7 +40,7 @@ define Package/dsl-vrx200-firmware-xdsl-a
CATEGORY:=Firmware
TITLE:=VRX200 / VR9 CPE xDSL Annex A firmware
URL:=http://www.lantiq.com/
- DEPENDS:=@TARGET_lantiq_xrx200
+ DEPENDS:=@(TARGET_lantiq_xrx200||TARGET_lantiq_xrx200_legacy)
endef
define Package/dsl-vrx200-firmware-xdsl-a/description
@@ -52,7 +52,7 @@ define Package/dsl-vrx200-firmware-xdsl-b
CATEGORY:=Firmware
TITLE:=VRX200 / VR9 CPE xDSL Annex B firmware
URL:=http://www.lantiq.com/
- DEPENDS:=@TARGET_lantiq_xrx200
+ DEPENDS:=@(TARGET_lantiq_xrx200||TARGET_lantiq_xrx200_legacy)
endef
define Package/dsl-vrx200-firmware-xdsl-b/description
@@ -64,7 +64,7 @@ define Package/dsl-vrx200-firmware-xdsl-a-patch
CATEGORY:=Firmware
TITLE:=VRX200 / VR9 CPE xDSL Annex B to Annex A firmware patch
URL:=http://www.lantiq.com/
- DEPENDS:=@TARGET_lantiq_xrx200 +dsl-vrx200-firmware-xdsl-b +bspatch
+ DEPENDS:=@(TARGET_lantiq_xrx200||TARGET_lantiq_xrx200_legacy) +dsl-vrx200-firmware-xdsl-b +bspatch
endef
define Package/dsl-vrx200-firmware-xdsl-a-patch/description
@@ -76,7 +76,7 @@ define Package/dsl-vrx200-firmware-xdsl-b-patch
CATEGORY:=Firmware
TITLE:=VRX200 / VR9 CPE xDSL Annex A to Annex B firmware patch
URL:=http://www.lantiq.com/
- DEPENDS:=@TARGET_lantiq_xrx200 +dsl-vrx200-firmware-xdsl-a +bspatch
+ DEPENDS:=@(TARGET_lantiq_xrx200||TARGET_lantiq_xrx200_legacy) +dsl-vrx200-firmware-xdsl-a +bspatch
endef
define Package/dsl-vrx200-firmware-xdsl-b-patch/description
diff --git a/package/kernel/lantiq/ltq-atm/Makefile b/package/kernel/lantiq/ltq-atm/Makefile
index b81f3bb293..ca19c5052e 100644
--- a/package/kernel/lantiq/ltq-atm/Makefile
+++ b/package/kernel/lantiq/ltq-atm/Makefile
@@ -33,7 +33,7 @@ endef
KernelPackage/ltq-atm-danube=$(call KernelPackage/ltq-atm-template,danube,(TARGET_lantiq_xway||TARGET_lantiq_xway_legacy))
KernelPackage/ltq-atm-ar9=$(call KernelPackage/ltq-atm-template,ar9,TARGET_lantiq_xway)
KernelPackage/ltq-atm-ase=$(call KernelPackage/ltq-atm-template,ase,TARGET_lantiq_ase)
-KernelPackage/ltq-atm-vr9=$(call KernelPackage/ltq-atm-template,vr9,TARGET_lantiq_xrx200)
+KernelPackage/ltq-atm-vr9=$(call KernelPackage/ltq-atm-template,vr9,(TARGET_lantiq_xrx200||TARGET_lantiq_xrx200_legacy))
define Build/Configure
endef
diff --git a/package/kernel/lantiq/ltq-deu/Makefile b/package/kernel/lantiq/ltq-deu/Makefile
index 4e8127afab..96414bf186 100644
--- a/package/kernel/lantiq/ltq-deu/Makefile
+++ b/package/kernel/lantiq/ltq-deu/Makefile
@@ -21,14 +21,14 @@ define KernelPackage/ltq-deu-template
TITLE:=deu driver for $(1)
URL:=http://www.lantiq.com/
VARIANT:=$(1)
- DEPENDS:=@TARGET_lantiq_$(2) +kmod-crypto-manager +kmod-crypto-des
+ DEPENDS:=@$(2) +kmod-crypto-manager +kmod-crypto-des
FILES:=$(PKG_BUILD_DIR)/ltq_deu_$(1).ko
AUTOLOAD:=$(call AutoProbe,ltq_deu_$(1))
endef
-KernelPackage/ltq-deu-danube=$(call KernelPackage/ltq-deu-template,danube,xway)
-KernelPackage/ltq-deu-ar9=$(call KernelPackage/ltq-deu-template,ar9,xway)
-KernelPackage/ltq-deu-vr9=$(call KernelPackage/ltq-deu-template,vr9,xrx200)
+KernelPackage/ltq-deu-danube=$(call KernelPackage/ltq-deu-template,danube,TARGET_lantiq_xway)
+KernelPackage/ltq-deu-ar9=$(call KernelPackage/ltq-deu-template,ar9,TARGET_lantiq_xway)
+KernelPackage/ltq-deu-vr9=$(call KernelPackage/ltq-deu-template,vr9,(TARGET_lantiq_xrx200||TARGET_lantiq_xrx200_legacy))
define Build/Configure
endef
diff --git a/package/kernel/lantiq/ltq-ptm/Makefile b/package/kernel/lantiq/ltq-ptm/Makefile
index 03b1218874..c3ab47c1b3 100644
--- a/package/kernel/lantiq/ltq-ptm/Makefile
+++ b/package/kernel/lantiq/ltq-ptm/Makefile
@@ -22,7 +22,7 @@ define KernelPackage/ltq-ptm-template
TITLE:=ptm driver for $(1)
URL:=http://www.lantiq.com/
VARIANT:=$(1)
- DEPENDS:=@TARGET_lantiq_$(2)
+ DEPENDS:=@$(2)
ifeq ($(1),vr9)
DEPENDS+= +PACKAGE_kmod-ltq-ptm-$(1):kmod-ltq-vdsl-vr9-mei
else
@@ -34,10 +34,10 @@ endif
FILES:=$(PKG_BUILD_DIR)/ltq_ptm_$(1).ko
endef
-KernelPackage/ltq-ptm-danube=$(call KernelPackage/ltq-ptm-template,danube,xway)
-KernelPackage/ltq-ptm-ar9=$(call KernelPackage/ltq-ptm-template,ar9,xway)
-KernelPackage/ltq-ptm-ase=$(call KernelPackage/ltq-ptm-template,ase,ase)
-KernelPackage/ltq-ptm-vr9=$(call KernelPackage/ltq-ptm-template,vr9,xrx200)
+KernelPackage/ltq-ptm-danube=$(call KernelPackage/ltq-ptm-template,danube,TARGET_lantiq_xway)
+KernelPackage/ltq-ptm-ar9=$(call KernelPackage/ltq-ptm-template,ar9,TARGET_lantiq_xway)
+KernelPackage/ltq-ptm-ase=$(call KernelPackage/ltq-ptm-template,ase,TARGET_lantiq_ase)
+KernelPackage/ltq-ptm-vr9=$(call KernelPackage/ltq-ptm-template,vr9,(TARGET_lantiq_xrx200||TARGET_lantiq_xrx200_legacy))
define Build/Configure
endef
diff --git a/package/kernel/lantiq/ltq-vdsl-fw/Makefile b/package/kernel/lantiq/ltq-vdsl-fw/Makefile
index 88883ffdee..61833e018c 100644
--- a/package/kernel/lantiq/ltq-vdsl-fw/Makefile
+++ b/package/kernel/lantiq/ltq-vdsl-fw/Makefile
@@ -19,7 +19,7 @@ define Package/ltq-vdsl-vr9-vectoring-fw-installer
TITLE:=VDSL2 Vectoring Firmware installer
SECTION:=net
CATEGORY:=Network
- DEPENDS:=@TARGET_lantiq_xrx200 +kmod-ltq-vdsl-vr9
+ DEPENDS:=@(TARGET_lantiq_xrx200||TARGET_lantiq_xrx200_legacy) +kmod-ltq-vdsl-vr9
endef
define Build/Prepare
diff --git a/package/kernel/lantiq/ltq-vdsl-vr9-mei/Makefile b/package/kernel/lantiq/ltq-vdsl-vr9-mei/Makefile
index e9c5a681fd..9b3dac299f 100644
--- a/package/kernel/lantiq/ltq-vdsl-vr9-mei/Makefile
+++ b/package/kernel/lantiq/ltq-vdsl-vr9-mei/Makefile
@@ -29,7 +29,7 @@ define KernelPackage/ltq-vdsl-vr9-mei
TITLE:=mei driver for vdsl
SECTION:=sys
SUBMENU:=Network Devices
- DEPENDS:=@TARGET_lantiq_xrx200 +kmod-ltq-ifxos +kmod-ltq-vectoring
+ DEPENDS:=@(TARGET_lantiq_xrx200||TARGET_lantiq_xrx200_legacy) +kmod-ltq-ifxos +kmod-ltq-vectoring
FILES:=$(PKG_BUILD_DIR)/src/drv_mei_cpe.ko
AUTOLOAD:=$(call AutoLoad,50,drv_mei_cpe)
endef
@@ -44,7 +44,7 @@ define Package/ltq-vdsl-vr9-mei-test
CATEGORY:=Network
TITLE:=Lantiq mei driver test tool
URL:=http://www.lantiq.com/
- DEPENDS:=@TARGET_lantiq_xrx200
+ DEPENDS:=@(TARGET_lantiq_xrx200||TARGET_lantiq_xrx200_legacy)
endef
define Package/ltq-vdsl-vr9-mei-test/description
diff --git a/package/kernel/lantiq/ltq-vdsl-vr9/Makefile b/package/kernel/lantiq/ltq-vdsl-vr9/Makefile
index ebcb935a73..5a53c050d4 100644
--- a/package/kernel/lantiq/ltq-vdsl-vr9/Makefile
+++ b/package/kernel/lantiq/ltq-vdsl-vr9/Makefile
@@ -29,7 +29,7 @@ define KernelPackage/ltq-vdsl-vr9
TITLE:=vdsl driver
SECTION:=sys
SUBMENU:=Network Devices
- DEPENDS:=@TARGET_lantiq_xrx200 +kmod-ltq-vdsl-vr9-mei
+ DEPENDS:=@(TARGET_lantiq_xrx200||TARGET_lantiq_xrx200_legacy) +kmod-ltq-vdsl-vr9-mei
FILES:=$(PKG_BUILD_DIR)/src/drv_dsl_cpe_api.ko
AUTOLOAD:=$(call AutoLoad,51,drv_dsl_cpe_api)
endef
diff --git a/package/kernel/lantiq/ltq-vectoring/Makefile b/package/kernel/lantiq/ltq-vectoring/Makefile
index 6076df7742..ea177942b4 100644
--- a/package/kernel/lantiq/ltq-vectoring/Makefile
+++ b/package/kernel/lantiq/ltq-vectoring/Makefile
@@ -20,7 +20,7 @@ define KernelPackage/ltq-vectoring
CATEGORY:=Kernel modules
SUBMENU:=Network Devices
TITLE:=driver for sending vectoring error samples
- DEPENDS:=@TARGET_lantiq_xrx200
+ DEPENDS:=@(TARGET_lantiq_xrx200||TARGET_lantiq_xrx200_legacy)
FILES:=$(PKG_BUILD_DIR)/$(MAKE_PATH)/ltq_vectoring.ko
AUTOLOAD:=$(call AutoLoad,49,ltq_vectoring)
endef
@@ -38,7 +38,7 @@ define KernelPackage/ltq-vectoring-test
CATEGORY:=Kernel modules
SUBMENU:=Network Devices
TITLE:=driver for testing the vectoring driver
- DEPENDS:=@TARGET_lantiq_xrx200 +kmod-ltq-vectoring
+ DEPENDS:=@(TARGET_lantiq_xrx200||TARGET_lantiq_xrx200_legacy) +kmod-ltq-vectoring
FILES:=$(PKG_BUILD_DIR)/$(MAKE_PATH)/ltq_vectoring_test.ko
endef
diff --git a/package/network/config/ltq-vdsl-vr9-app/Makefile b/package/network/config/ltq-vdsl-vr9-app/Makefile
index 51b88231f7..a73cd4ae62 100644
--- a/package/network/config/ltq-vdsl-vr9-app/Makefile
+++ b/package/network/config/ltq-vdsl-vr9-app/Makefile
@@ -29,7 +29,7 @@ define Package/ltq-vdsl-vr9-app
CATEGORY:=Network
TITLE:=Lantiq VDSL userland tool
URL:=http://www.lantiq.com/
- DEPENDS:=@TARGET_lantiq_xrx200 +libpthread +librt +ltq-dsl-base +libubox +libubus
+ DEPENDS:=@(TARGET_lantiq_xrx200||TARGET_lantiq_xrx200_legacy) +libpthread +librt +ltq-dsl-base +libubox +libubus
PROVIDES:=ltq-dsl-app
endef
diff --git a/target/linux/lantiq/Makefile b/target/linux/lantiq/Makefile
index 69fa8276e7..e7a251a505 100644
--- a/target/linux/lantiq/Makefile
+++ b/target/linux/lantiq/Makefile
@@ -7,7 +7,7 @@ include $(TOPDIR)/rules.mk
BOARD:=lantiq
BOARDNAME:=Lantiq
FEATURES:=squashfs
-SUBTARGETS:=xrx200 xway xway_legacy falcon ase
+SUBTARGETS:=xrx200 xrx200_legacy xway xway_legacy falcon ase
KERNEL_PATCHVER:=6.6
diff --git a/target/linux/lantiq/image/Makefile b/target/linux/lantiq/image/Makefile
index 9fdb949392..307d47a979 100644
--- a/target/linux/lantiq/image/Makefile
+++ b/target/linux/lantiq/image/Makefile
@@ -162,6 +162,12 @@ include danube.mk
include ar9.mk
endif
+ifeq ($(SUBTARGET),xrx200_legacy)
+DEFAULT_SOC := vr9
+include tp-link_legacy.mk
+include vr9_legacy.mk
+endif
+
ifeq ($(SUBTARGET),xrx200)
DEFAULT_SOC := vr9
include tp-link.mk
diff --git a/target/linux/lantiq/image/tp-link.mk b/target/linux/lantiq/image/tp-link.mk
index 751f61589d..c2f5b95dd6 100644
--- a/target/linux/lantiq/image/tp-link.mk
+++ b/target/linux/lantiq/image/tp-link.mk
@@ -17,34 +17,6 @@ define Device/lantiqTpLink
check-size | append-metadata
endef
-define Device/tplink_tdw8970
- $(Device/dsa-migration)
- $(Device/lantiqTpLink)
- DEVICE_MODEL := TD-W8970
- DEVICE_VARIANT := v1
- TPLINK_FLASHLAYOUT := 8Mltq
- TPLINK_HWID := 0x89700001
- TPLINK_HWREV := 1
- IMAGE_SIZE := 7680k
- DEVICE_PACKAGES:= kmod-ath9k wpad-basic-mbedtls kmod-usb-dwc2 kmod-usb-ledtrig-usbport
- SUPPORTED_DEVICES += TDW8970
-endef
-TARGET_DEVICES += tplink_tdw8970
-
-define Device/tplink_tdw8980
- $(Device/dsa-migration)
- $(Device/lantiqTpLink)
- DEVICE_MODEL := TD-W8980
- DEVICE_VARIANT := v1
- TPLINK_FLASHLAYOUT := 8Mltq
- TPLINK_HWID := 0x89800001
- TPLINK_HWREV := 14
- IMAGE_SIZE := 7680k
- DEVICE_PACKAGES:= kmod-ath9k kmod-owl-loader wpad-basic-mbedtls kmod-usb-dwc2 kmod-usb-ledtrig-usbport
- SUPPORTED_DEVICES += TDW8980
-endef
-TARGET_DEVICES += tplink_tdw8980
-
define Device/tplink_vr200
$(Device/dsa-migration)
$(Device/lantiqTpLink)
diff --git a/target/linux/lantiq/image/tp-link.mk b/target/linux/lantiq/image/tp-link_legacy.mk
similarity index 62%
copy from target/linux/lantiq/image/tp-link.mk
copy to target/linux/lantiq/image/tp-link_legacy.mk
index 751f61589d..d9bcd35d10 100644
--- a/target/linux/lantiq/image/tp-link.mk
+++ b/target/linux/lantiq/image/tp-link_legacy.mk
@@ -44,31 +44,3 @@ define Device/tplink_tdw8980
SUPPORTED_DEVICES += TDW8980
endef
TARGET_DEVICES += tplink_tdw8980
-
-define Device/tplink_vr200
- $(Device/dsa-migration)
- $(Device/lantiqTpLink)
- DEVICE_MODEL := Archer VR200
- DEVICE_VARIANT := v1
- TPLINK_FLASHLAYOUT := 16Mltq
- TPLINK_HWID := 0x63e64801
- TPLINK_HWREV := 0x53
- IMAGE_SIZE := 15808k
- DEVICE_PACKAGES:= kmod-mt76x0e wpad-basic-mbedtls kmod-usb-dwc2 kmod-usb-ledtrig-usbport
- SUPPORTED_DEVICES += VR200
-endef
-TARGET_DEVICES += tplink_vr200
-
-define Device/tplink_vr200v
- $(Device/dsa-migration)
- $(Device/lantiqTpLink)
- DEVICE_MODEL := Archer VR200v
- DEVICE_VARIANT := v1
- TPLINK_FLASHLAYOUT := 16Mltq
- TPLINK_HWID := 0x73b70801
- TPLINK_HWREV := 0x2f
- IMAGE_SIZE := 15808k
- DEVICE_PACKAGES:= kmod-mt76x0e wpad-basic-mbedtls kmod-usb-dwc2 kmod-usb-ledtrig-usbport kmod-ltq-tapi kmod-ltq-vmmc
- SUPPORTED_DEVICES += VR200v
-endef
-TARGET_DEVICES += tplink_vr200v
diff --git a/target/linux/lantiq/image/vr9.mk b/target/linux/lantiq/image/vr9.mk
index fe5b5a6bb5..e2608213dc 100644
--- a/target/linux/lantiq/image/vr9.mk
+++ b/target/linux/lantiq/image/vr9.mk
@@ -5,17 +5,6 @@ define Device/dsa-migration
DEVICE_COMPAT_MESSAGE := Config cannot be migrated from swconfig to DSA
endef
-define Device/alphanetworks_asl56026
- $(Device/dsa-migration)
- DEVICE_VENDOR := Alpha
- DEVICE_MODEL := ASL56026
- DEVICE_ALT0_VENDOR := BT Openreach
- DEVICE_ALT0_MODEL := ECI VDSL Modem V-2FUb/I
- IMAGE_SIZE := 7488k
- DEFAULT := n
-endef
-TARGET_DEVICES += alphanetworks_asl56026
-
define Device/arcadyan_arv7519rw22
$(Device/dsa-migration)
DEVICE_VENDOR := Arcadyan
@@ -33,16 +22,6 @@ define Device/arcadyan_arv7519rw22
endef
TARGET_DEVICES += arcadyan_arv7519rw22
-define Device/arcadyan_vg3503j
- $(Device/dsa-migration)
- DEVICE_VENDOR := BT Openreach
- DEVICE_MODEL := ECI VDSL Modem V-2FUb/R
- IMAGE_SIZE := 8000k
- SUPPORTED_DEVICES += VG3503J
- DEFAULT := n
-endef
-TARGET_DEVICES += arcadyan_vg3503j
-
define Device/arcadyan_vgv7510kw22-brn
$(Device/dsa-migration)
$(Device/lantiqBrnImage)
@@ -351,22 +330,6 @@ define Device/lantiq_easy80920-nor
endef
TARGET_DEVICES += lantiq_easy80920-nor
-define Device/netgear_dm200
- $(Device/dsa-migration)
- DEVICE_VENDOR := NETGEAR
- DEVICE_MODEL := DM200
- IMAGES := sysupgrade.bin factory.img
- IMAGE/sysupgrade.bin := append-kernel | \
- pad-offset 64k 64 | append-uImage-fakehdr filesystem | \
- pad-offset 64k 64 | append-uImage-fakehdr filesystem | \
- append-rootfs | pad-rootfs | check-size | append-metadata
- IMAGE/factory.img := $$(IMAGE/sysupgrade.bin) | netgear-dni
- IMAGE_SIZE := 7872k
- NETGEAR_BOARD_ID := DM200
- NETGEAR_HW_ID := 29765233+8+0+64+0+0
-endef
-TARGET_DEVICES += netgear_dm200
-
define Device/zyxel_p-2812hnu-f1
$(Device/NAND)
DEVICE_COMPAT_VERSION := 2.0
diff --git a/target/linux/lantiq/image/vr9_legacy.mk b/target/linux/lantiq/image/vr9_legacy.mk
new file mode 100644
index 0000000000..814fb51578
--- /dev/null
+++ b/target/linux/lantiq/image/vr9_legacy.mk
@@ -0,0 +1,43 @@
+DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
+
+define Device/dsa-migration
+ DEVICE_COMPAT_VERSION := 1.1
+ DEVICE_COMPAT_MESSAGE := Config cannot be migrated from swconfig to DSA
+endef
+
+define Device/alphanetworks_asl56026
+ $(Device/dsa-migration)
+ DEVICE_VENDOR := Alpha
+ DEVICE_MODEL := ASL56026
+ DEVICE_ALT0_VENDOR := BT Openreach
+ DEVICE_ALT0_MODEL := ECI VDSL Modem V-2FUb/I
+ IMAGE_SIZE := 7488k
+ DEFAULT := n
+endef
+TARGET_DEVICES += alphanetworks_asl56026
+
+define Device/arcadyan_vg3503j
+ $(Device/dsa-migration)
+ DEVICE_VENDOR := BT Openreach
+ DEVICE_MODEL := ECI VDSL Modem V-2FUb/R
+ IMAGE_SIZE := 8000k
+ SUPPORTED_DEVICES += VG3503J
+ DEFAULT := n
+endef
+TARGET_DEVICES += arcadyan_vg3503j
+
+define Device/netgear_dm200
+ $(Device/dsa-migration)
+ DEVICE_VENDOR := NETGEAR
+ DEVICE_MODEL := DM200
+ IMAGES := sysupgrade.bin factory.img
+ IMAGE/sysupgrade.bin := append-kernel | \
+ pad-offset 64k 64 | append-uImage-fakehdr filesystem | \
+ pad-offset 64k 64 | append-uImage-fakehdr filesystem | \
+ append-rootfs | pad-rootfs | check-size | append-metadata
+ IMAGE/factory.img := $$(IMAGE/sysupgrade.bin) | netgear-dni
+ IMAGE_SIZE := 7872k
+ NETGEAR_BOARD_ID := DM200
+ NETGEAR_HW_ID := 29765233+8+0+64+0+0
+endef
+TARGET_DEVICES += netgear_dm200
diff --git a/target/linux/lantiq/xrx200/base-files/etc/board.d/01_leds b/target/linux/lantiq/xrx200/base-files/etc/board.d/01_leds
index dfc647a43e..815f312dac 100644
--- a/target/linux/lantiq/xrx200/base-files/etc/board.d/01_leds
+++ b/target/linux/lantiq/xrx200/base-files/etc/board.d/01_leds
@@ -64,9 +64,6 @@ buffalo,wbmr-300hpd)
ucidef_set_led_switch "lan3" "LAN3" "green:lan3" "switch0" "0x20"
ucidef_set_led_default "router" "router" "green:router" "1"
;;
-netgear,dm200)
- ucidef_set_led_netdev "lan" "lan" "green:lan" "eth0"
- ;;
esac
board_config_flush
diff --git a/target/linux/lantiq/xrx200/base-files/etc/board.d/02_network b/target/linux/lantiq/xrx200/base-files/etc/board.d/02_network
index 27a3c75edc..6c35c7a4de 100644
--- a/target/linux/lantiq/xrx200/base-files/etc/board.d/02_network
+++ b/target/linux/lantiq/xrx200/base-files/etc/board.d/02_network
@@ -11,10 +11,6 @@ lantiq_setup_interfaces()
local board="$1"
case "$board" in
- alphanetworks,asl56026|\
- arcadyan,vg3503j)
- ucidef_set_interface_lan "lan1 lan2"
- ;;
arcadyan,arv7519rw22)
ucidef_set_interface_lan "lan1 lan2 lan3 lan4 lan5"
;;
@@ -46,14 +42,11 @@ lantiq_setup_interfaces()
avm,fritz7490|\
avm,fritz7490-micron|\
buffalo,wbmr-300hpd|\
- tplink,tdw8970|\
- tplink,tdw8980|\
tplink,vr200|\
tplink,vr200v)
ucidef_set_interface_lan "lan1 lan2 lan3 lan4"
;;
- avm,fritz7412|\
- netgear,dm200)
+ avm,fritz7412)
ucidef_set_interface_lan "lan"
;;
*)
@@ -95,14 +88,9 @@ lantiq_setup_macs()
local wan_mac=""
case "$board" in
- alphanetworks,asl56026)
- lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
- wan_mac=$(mtd_get_mac_ascii u-boot-env wanmac)
- ;;
arcadyan,arv7519rw22)
wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 0x16)" 1)
;;
- arcadyan,vg3503j|\
lantiq,easy80920-nand|\
lantiq,easy80920-nor|\
zyxel,p-2812hnu-f1|\
@@ -148,14 +136,6 @@ lantiq_setup_macs()
lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
wan_mac="$lan_mac"
;;
- netgear,dm200)
- lan_mac=$(mtd_get_mac_binary ART 0x0)
- wan_mac=$(macaddr_add "$lan_mac" 1)
- ;;
- tplink,tdw8970|\
- tplink,tdw8980)
- wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 0xf100)" 1)
- ;;
tplink,vr200|\
tplink,vr200v)
wan_mac=$(macaddr_add "$(mtd_get_mac_binary romfile 0xf100)" 1)
diff --git a/target/linux/lantiq/xrx200/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom b/target/linux/lantiq/xrx200/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom
index eefc39b30b..164e2d39ca 100644
--- a/target/linux/lantiq/xrx200/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom
+++ b/target/linux/lantiq/xrx200/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom
@@ -31,10 +31,6 @@ case "$FIRMWARE" in
caldata_extract_ubi "caldata" 0x1000 0x1000
ath9k_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary_ubi caldata 0x110c) 2) 0x10c
;;
- tplink,tdw8970|\
- tplink,tdw8980)
- caldata_extract "boardconfig" 0x21000 0x1000
- ;;
*)
caldata_die "board $board is not supported yet"
;;
diff --git a/target/linux/lantiq/xrx200/base-files/etc/uci-defaults/01_led_migration b/target/linux/lantiq/xrx200/base-files/etc/uci-defaults/01_led_migration
index 94f9df78bd..e3f6a98149 100644
--- a/target/linux/lantiq/xrx200/base-files/etc/uci-defaults/01_led_migration
+++ b/target/linux/lantiq/xrx200/base-files/etc/uci-defaults/01_led_migration
@@ -18,9 +18,7 @@ do_internet_led_rename()
}
case "$(board_name)" in
-alphanetworks,asl56026|\
arcadyan,arv7519rw22|\
-arcadyan,vg3503j|\
avm,fritz7360sl|\
bt,homehub-v5a)
do_internet_led_rename
diff --git a/target/linux/lantiq/xrx200_legacy/base-files/etc/board.d/01_leds b/target/linux/lantiq/xrx200_legacy/base-files/etc/board.d/01_leds
new file mode 100644
index 0000000000..dec22b51b5
--- /dev/null
+++ b/target/linux/lantiq/xrx200_legacy/base-files/etc/board.d/01_leds
@@ -0,0 +1,34 @@
+#
+# Copyright (C) 2011-2015 OpenWrt.org
+#
+
+. /lib/functions/leds.sh
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+led_wifi="$(get_dt_led wifi)"
+[ -n "$led_wifi" ] && ucidef_set_led_wlan "wifi" "wifi" "$led_wifi" "phy0tpt"
+
+led_dsl="$(get_dt_led dsl)"
+[ -n "$led_dsl" ] && {
+ led_internet="$(get_dt_led internet)"
+ if [ -n "$led_internet" ]; then
+ ucidef_set_led_default "dsl" "dsl" "$led_dsl" "0"
+ ucidef_set_led_netdev "internet" "internet" "$led_internet" "pppoe-wan"
+ else
+ ucidef_set_led_netdev "dsl" "dsl" "$led_dsl" "dsl0"
+ fi
+}
+
+board=$(board_name)
+
+case "$board" in
+netgear,dm200)
+ ucidef_set_led_netdev "lan" "lan" "green:lan" "eth0"
+ ;;
+esac
+
+board_config_flush
+
+exit 0
diff --git a/target/linux/lantiq/xrx200_legacy/base-files/etc/board.d/02_network b/target/linux/lantiq/xrx200_legacy/base-files/etc/board.d/02_network
new file mode 100644
index 0000000000..9088de86b1
--- /dev/null
+++ b/target/linux/lantiq/xrx200_legacy/base-files/etc/board.d/02_network
@@ -0,0 +1,75 @@
+#
+# Copyright (C) 2011-2015 OpenWrt.org
+#
+
+. /lib/functions/uci-defaults.sh
+. /lib/functions/system.sh
+. /lib/functions/lantiq.sh
+
+lantiq_setup_interfaces()
+{
+ local board="$1"
+
+ case "$board" in
+ alphanetworks,asl56026|\
+ arcadyan,vg3503j)
+ ucidef_set_interface_lan "lan1 lan2"
+ ;;
+ tplink,tdw8970|\
+ tplink,tdw8980)
+ ucidef_set_interface_lan "lan1 lan2 lan3 lan4"
+ ;;
+ netgear,dm200)
+ ucidef_set_interface_lan "lan"
+ ;;
+ *)
+ ucidef_set_interface_lan 'eth0'
+ ;;
+ esac
+}
+
+lantiq_setup_dsl()
+{
+ local board="$1"
+ local annex="a"
+
+ lantiq_setup_dsl_helper "$annex"
+}
+
+lantiq_setup_macs()
+{
+ local board="$1"
+ local lan_mac=""
+ local wan_mac=""
+
+ case "$board" in
+ alphanetworks,asl56026)
+ lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
+ wan_mac=$(mtd_get_mac_ascii u-boot-env wanmac)
+ ;;
+ arcadyan,vg3503j)
+ lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
+ wan_mac=$(macaddr_add "$lan_mac" 1)
+ ;;
+ netgear,dm200)
+ lan_mac=$(mtd_get_mac_binary ART 0x0)
+ wan_mac=$(macaddr_add "$lan_mac" 1)
+ ;;
+ tplink,tdw8970|\
+ tplink,tdw8980)
+ wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 0xf100)" 1)
+ ;;
+ esac
+
+ [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" "$lan_mac"
+ [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" "$wan_mac"
+}
+
+board_config_update
+board=$(board_name)
+lantiq_setup_interfaces $board
+lantiq_setup_dsl $board
+lantiq_setup_macs $board
+board_config_flush
+
+exit 0
diff --git a/target/linux/lantiq/xrx200_legacy/base-files/etc/board.d/05_compat-version b/target/linux/lantiq/xrx200_legacy/base-files/etc/board.d/05_compat-version
new file mode 100644
index 0000000000..45bef9385b
--- /dev/null
+++ b/target/linux/lantiq/xrx200_legacy/base-files/etc/board.d/05_compat-version
@@ -0,0 +1,18 @@
+#
+# Copyright (C) 2020 OpenWrt.org
+#
+
+. /lib/functions.sh
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+case "$(board_name)" in
+ *)
+ ucidef_set_compat_version "1.1"
+ ;;
+esac
+
+board_config_flush
+
+exit 0
diff --git a/target/linux/lantiq/xrx200_legacy/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom b/target/linux/lantiq/xrx200_legacy/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom
new file mode 100644
index 0000000000..c10065d5d5
--- /dev/null
+++ b/target/linux/lantiq/xrx200_legacy/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom
@@ -0,0 +1,23 @@
+#!/bin/sh
+
+[ -e /lib/firmware/$FIRMWARE ] && exit 0
+
+. /lib/functions/caldata.sh
+
+case "$FIRMWARE" in
+ "ath9k-eeprom-pci-0000:00:0e.0.bin" | \
+ "ath9k-eeprom-pci-0000:01:00.0.bin" | \
+ "ath9k-eeprom-pci-0000:02:00.0.bin")
+ board=$(board_name)
+
+ case "$board" in
+ tplink,tdw8970|\
+ tplink,tdw8980)
+ caldata_extract "boardconfig" 0x21000 0x1000
+ ;;
+ *)
+ caldata_die "board $board is not supported yet"
+ ;;
+ esac
+ ;;
+esac
diff --git a/target/linux/lantiq/xrx200/base-files/etc/uci-defaults/01_led_migration b/target/linux/lantiq/xrx200_legacy/base-files/etc/uci-defaults/01_led_migration
similarity index 86%
copy from target/linux/lantiq/xrx200/base-files/etc/uci-defaults/01_led_migration
copy to target/linux/lantiq/xrx200_legacy/base-files/etc/uci-defaults/01_led_migration
index 94f9df78bd..f6f11bc569 100644
--- a/target/linux/lantiq/xrx200/base-files/etc/uci-defaults/01_led_migration
+++ b/target/linux/lantiq/xrx200_legacy/base-files/etc/uci-defaults/01_led_migration
@@ -19,10 +19,7 @@ do_internet_led_rename()
case "$(board_name)" in
alphanetworks,asl56026|\
-arcadyan,arv7519rw22|\
-arcadyan,vg3503j|\
-avm,fritz7360sl|\
-bt,homehub-v5a)
+arcadyan,vg3503j)
do_internet_led_rename
;;
esac
diff --git a/target/linux/lantiq/xrx200_legacy/base-files/lib/upgrade/platform.sh b/target/linux/lantiq/xrx200_legacy/base-files/lib/upgrade/platform.sh
new file mode 100755
index 0000000000..9a613c43b1
--- /dev/null
+++ b/target/linux/lantiq/xrx200_legacy/base-files/lib/upgrade/platform.sh
@@ -0,0 +1,16 @@
+PART_NAME=firmware
+REQUIRE_IMAGE_METADATA=1
+
+platform_check_image() {
+ return 0
+}
+
+platform_do_upgrade() {
+ local board=$(board_name)
+
+ case "$board" in
+ *)
+ default_do_upgrade "$1"
+ ;;
+ esac
+}
diff --git a/target/linux/lantiq/xrx200_legacy/config-6.6 b/target/linux/lantiq/xrx200_legacy/config-6.6
new file mode 100644
index 0000000000..c8650c4e87
--- /dev/null
+++ b/target/linux/lantiq/xrx200_legacy/config-6.6
@@ -0,0 +1,86 @@
+CONFIG_AT803X_PHY=y
+CONFIG_BLK_MQ_PCI=y
+CONFIG_CONTEXT_TRACKING=y
+CONFIG_CONTEXT_TRACKING_IDLE=y
+CONFIG_CPU_MIPSR2_IRQ_EI=y
+CONFIG_CPU_MIPSR2_IRQ_VI=y
+CONFIG_CPU_RMAP=y
+CONFIG_CRC16=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_HASH_INFO=y
+CONFIG_CRYPTO_LZO=y
+CONFIG_CRYPTO_ZSTD=y
+CONFIG_EXTRA_FIRMWARE="lantiq/xrx200_phy11g_a14.bin lantiq/xrx200_phy11g_a22.bin lantiq/xrx200_phy22f_a14.bin lantiq/xrx200_phy22f_a22.bin"
+CONFIG_EXTRA_FIRMWARE_DIR="firmware"
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
+CONFIG_GRO_CELLS=y
+CONFIG_HWMON=y
+CONFIG_HW_RANDOM=y
+CONFIG_ICPLUS_PHY=y
+CONFIG_IFX_VPE_EXT=y
+CONFIG_INPUT=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_INTEL_XWAY_PHY=y
+CONFIG_IRQ_DOMAIN_HIERARCHY=y
+# CONFIG_ISDN is not set
+CONFIG_LANTIQ_XRX200=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_MIPS_MT=y
+# CONFIG_MIPS_MT_FPAFF is not set
+CONFIG_MIPS_MT_SMP=y
+CONFIG_MIPS_NR_CPU_NR_MAP=2
+CONFIG_MIPS_PERF_SHARED_TC_COUNTERS=y
+CONFIG_MIPS_VPE_APSP_API=y
+CONFIG_MIPS_VPE_APSP_API_MT=y
+CONFIG_MIPS_VPE_LOADER=y
+CONFIG_MIPS_VPE_LOADER_MT=y
+CONFIG_MIPS_VPE_LOADER_TOM=y
+CONFIG_NEED_SRCU_NMI_SAFE=y
+CONFIG_NET_DEVLINK=y
+CONFIG_NET_DSA=y
+CONFIG_NET_DSA_LANTIQ_GSWIP=y
+CONFIG_NET_DSA_TAG_GSWIP=y
+CONFIG_NET_FLOW_LIMIT=y
+CONFIG_NET_SWITCHDEV=y
+CONFIG_NLS=y
+CONFIG_NR_CPUS=2
+CONFIG_PADATA=y
+CONFIG_PCI=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIE_LANTIQ=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_LANTIQ=y
+CONFIG_PHYLINK=y
+CONFIG_PHY_LANTIQ_VRX200_PCIE=y
+CONFIG_POWER_RESET_GPIO=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_POWER_SUPPLY_HWMON=y
+CONFIG_QCOM_NET_PHYLIB=y
+CONFIG_QUEUED_RWLOCKS=y
+CONFIG_QUEUED_SPINLOCKS=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_RFS_ACCEL=y
+CONFIG_RPS=y
+CONFIG_SENSORS_LTQ_CPUTEMP=y
+CONFIG_SGL_ALLOC=y
+CONFIG_SMP=y
+CONFIG_SMP_UP=y
+CONFIG_SOCK_RX_QUEUE_MAPPING=y
+CONFIG_SYNC_R4K=y
+CONFIG_SYS_SUPPORTS_SCHED_SMT=y
+CONFIG_SYS_SUPPORTS_SMP=y
+CONFIG_TREE_RCU=y
+CONFIG_TREE_SRCU=y
+CONFIG_USB=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_SUPPORT=y
+CONFIG_XPS=y
+CONFIG_XXHASH=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZSTD_COMMON=y
+CONFIG_ZSTD_COMPRESS=y
+CONFIG_ZSTD_DECOMPRESS=y
diff --git a/target/linux/lantiq/xrx200_legacy/profiles/00-default.mk b/target/linux/lantiq/xrx200_legacy/profiles/00-default.mk
new file mode 100644
index 0000000000..26bc8b502b
--- /dev/null
+++ b/target/linux/lantiq/xrx200_legacy/profiles/00-default.mk
@@ -0,0 +1,9 @@
+define Profile/Default
+ NAME:=Default Profile
+ PRIORITY:=1
+endef
+
+define Profile/Default/Description
+ Default package set compatible with most boards.
+endef
+$(eval $(call Profile,Default))
diff --git a/target/linux/lantiq/xrx200_legacy/target.mk b/target/linux/lantiq/xrx200_legacy/target.mk
new file mode 100644
index 0000000000..d9a6fff651
--- /dev/null
+++ b/target/linux/lantiq/xrx200_legacy/target.mk
@@ -0,0 +1,22 @@
+ARCH:=mips
+SUBTARGET:=xrx200_legacy
+BOARDNAME:=XRX200 Legacy
+FEATURES+=atm ramdisk small_flash
+CPU_TYPE:=24kc
+
+DEFAULT_PACKAGES+=kmod-leds-gpio \
+ kmod-gpio-button-hotplug \
+ ltq-vdsl-vr9-vectoring-fw-installer \
+ kmod-ltq-vdsl-vr9-mei \
+ kmod-ltq-vdsl-vr9 \
+ kmod-ltq-atm-vr9 \
+ kmod-ltq-deu-vr9 \
+ kmod-ltq-ptm-vr9 \
+ ltq-vdsl-vr9-app \
+ dsl-vrx200-firmware-xdsl-a \
+ dsl-vrx200-firmware-xdsl-b-patch \
+ ppp-mod-pppoa
+
+define Target/Description
+ Lantiq XRX200 Legacy for boards with small flash
+endef
More information about the lede-commits
mailing list