[openwrt/openwrt] lantiq: grow kernel partition Zyxel P-2812HNU-F1

[LEDE Commits]

hauke pushed a commit to openwrt/openwrt.git, branch main:
https://git.openwrt.org/0d21cc8a92ea3b2cc94efefd60eae968a4296543

commit 0d21cc8a92ea3b2cc94efefd60eae968a4296543
Author: Isaac de Wolff <idewolff at gmx.com>
AuthorDate: Sun Dec 8 13:52:40 2024 +0100

    lantiq: grow kernel partition Zyxel P-2812HNU-F1
    
    Change partition table in dts file.
    Change DEVICE_COMPAT_VERSION
    Enable automatic build.
    
    To take advantage of the bigger kernel partition,
    the uboot environment has to be changed:
    setenv nboot 'nand read 0x81000000 0x60000 0x500000; bootm 0x81000000'
    setenv bootcmd 'run nboot'
    saveenv
    
    Of course you need a u-boot capable of handling this.
    The u-boot discussed in this forum thread:
    https://forum.openwrt.org/t/zyxel-p2812hnu-f1-u-boot/100281
    should be able to handle kernels up to an uncompressed size of 16MiB.
    
    Signed-off-by: Isaac de Wolff <idewolff at gmx.com>
    Link: https://github.com/openwrt/openwrt/pull/17209
    Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
---
 .../files/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-f1.dts     | 6 +++---
 target/linux/lantiq/image/vr9.mk                                   | 7 ++++---
 .../linux/lantiq/xrx200/base-files/etc/board.d/05_compat-version   | 4 ++++
 3 files changed, 11 insertions(+), 6 deletions(-)

diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-f1.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-f1.dts
index 247b811b4f..58a34d6e27 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-f1.dts
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-f1.dts
@@ -47,11 +47,11 @@
 			};
 			partition at 60000 {
 				label = "kernel";
-				reg = <0x60000 0x300000>;
+				reg = <0x60000 0x500000>;
 			};
-			partition at 360000 {
+			partition at 560000 {
 				label = "ubi";
-				reg = <0x360000 0x7ca0000>;
+				reg = <0x560000 0x7aa0000>;
 			};
 		};
 	};
diff --git a/target/linux/lantiq/image/vr9.mk b/target/linux/lantiq/image/vr9.mk
index d4bded9cae..fe5b5a6bb5 100644
--- a/target/linux/lantiq/image/vr9.mk
+++ b/target/linux/lantiq/image/vr9.mk
@@ -368,16 +368,17 @@ endef
 TARGET_DEVICES += netgear_dm200
 
 define Device/zyxel_p-2812hnu-f1
-  $(Device/dsa-migration)
   $(Device/NAND)
+  DEVICE_COMPAT_VERSION := 2.0
+  DEVICE_COMPAT_MESSAGE := kernel and ubi partitions had to be resized. \
+  Upgrade manually using initramfs, and change u-boot environment to load 5MiB for uImage.
   DEVICE_VENDOR := Zyxel
   DEVICE_MODEL := P-2812HNU
   DEVICE_VARIANT := F1
   BOARD_NAME := P2812HNUF1
   DEVICE_PACKAGES := kmod-rt2800-pci wpad-basic-mbedtls kmod-usb-dwc2 kmod-usb-ledtrig-usbport
-  KERNEL_SIZE := 3072k
+  KERNEL_SIZE := 5120k
   SUPPORTED_DEVICES += P2812HNUF1
-  DEFAULT := n
 endef
 TARGET_DEVICES += zyxel_p-2812hnu-f1
 
diff --git a/target/linux/lantiq/xrx200/base-files/etc/board.d/05_compat-version b/target/linux/lantiq/xrx200/base-files/etc/board.d/05_compat-version
index 45bef9385b..5690d84874 100644
--- a/target/linux/lantiq/xrx200/base-files/etc/board.d/05_compat-version
+++ b/target/linux/lantiq/xrx200/base-files/etc/board.d/05_compat-version
@@ -8,6 +8,10 @@
 board_config_update
 
 case "$(board_name)" in
+	zyxel,p-2812hnu-f1)
+		ucidef_set_compat_version "2.0"
+		;;
+
 	*)
 		ucidef_set_compat_version "1.1"
 		;;