June 2021 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Tue Jun 1 14:20:32 PDT 2021
Ending: Wed Jun 30 14:24:20 PDT 2021
Messages: 332

• [openwrt/openwrt] kernel: backport fix for hang on napi_disable with threaded NAPI   LEDE Commits
• [openwrt/openwrt] mac80211: fix detecting VHT capabilities when generating the default config   LEDE Commits
• [openwrt/openwrt] mac80211: do not enable VHT in the default config on 2.4 GHz   LEDE Commits
• [openwrt/openwrt] hostapd: add support for configuring the beacon rate   LEDE Commits
• [openwrt/openwrt] hostapd: add configurable rssi thresholds for rejecting assoc/probe requests   LEDE Commits
• [openwrt/openwrt] hostapd: add support for configuring proxy ARP   LEDE Commits
• [openwrt/openwrt] hostapd: add support for specifying the maxassoc parameter as a device option   LEDE Commits
• [openwrt/openwrt] hostapd: add default values for r0kh/r1kh   LEDE Commits
• [openwrt/openwrt] hostapd: add eap_server support   LEDE Commits
• [openwrt/openwrt] mt76: update to the latest version   LEDE Commits
• [openwrt/openwrt] ramips: add support for ZTE MF283+   LEDE Commits
• [openwrt/openwrt] rampis: use lzma-loader for ZTE MF283+   LEDE Commits
• [openwrt/openwrt] build/json: fix IMAGE_PREFIX and DEVICE_PACKAGES   LEDE Commits
• [openwrt/openwrt] build/json: fix DEVICE_PACKAGES   LEDE Commits
• [openwrt/openwrt] kernel: ar8216: add get_features method   LEDE Commits
• [openwrt/openwrt] kernel: ar8216: remove soft_reset   LEDE Commits
• [openwrt/openwrt] mac80211: fix typo   LEDE Commits
• [openwrt/openwrt] ubus: update to version 2021-06-03   LEDE Commits
• [openwrt/openwrt] ubus: update to version 2021-06-03   LEDE Commits
• [openwrt/openwrt] hostapd: fix radius problem due to invalid attributes   LEDE Commits
• [openwrt/openwrt] odhcpd: update to git HEAD   LEDE Commits
• [openwrt/openwrt] netifd: update to the latest version   LEDE Commits
• [openwrt/openwrt] hostapd: fix bringing up vlan interfaces with the no-bridge option   LEDE Commits
• [openwrt/openwrt] mac80211: split ath patch in dedicated subdir   LEDE Commits
• [openwrt/openwrt] ath79: Add support for OpenMesh A60   LEDE Commits
• [openwrt/openwrt] ath79: Add support for OpenMesh A40   LEDE Commits
• [openwrt/openwrt] ath79: add support for Qualcomm AP143 reference boards   LEDE Commits
• [openwrt/openwrt] ramips: enable additional UART on MikroTik RouterBOARD M33G   LEDE Commits
• [openwrt/openwrt] hostapd: configure inter-AP communication interface for 802.11r   LEDE Commits
• [openwrt/openwrt] ipq40xx: add netgear wac510 support   LEDE Commits
• [openwrt/openwrt] ramips: add support for Linksys E5600   LEDE Commits
• [openwrt/openwrt] ramips: add support for Amped Wireless ALLY router and extender   LEDE Commits
• [openwrt/openwrt] ramips: add support for Linksys EA8100 v1   LEDE Commits
• [openwrt/openwrt] ipq806x: add support for Askey RT4230W REV6   LEDE Commits
• [openwrt/openwrt] umbim: fix whitespace issues   LEDE Commits
• [openwrt/openwrt] umbim: fix return value of proto_mbim_setup()   LEDE Commits
• [openwrt/openwrt] ath79: use dynamic partitioning for TP-Link CPE series   LEDE Commits
• [openwrt/openwrt] bcm63xx: drop USB LEDs for Technicolor TG582N / ADB P.DG A4001N   LEDE Commits
• [openwrt/openwrt] ramips: split Youku YK1 to YK-L1 and YK-L1c   LEDE Commits
• [openwrt/openwrt] treewide: remove "+" sign for increment with macaddr_add   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.10 to 5.10.42   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.4 to 5.4.124   LEDE Commits
• [openwrt/openwrt] ath10k-ct: update to latest version   LEDE Commits
• [openwrt/openwrt] x86: kernel: enable Fusion-MPT SAS driver   LEDE Commits
• [openwrt/openwrt] kernel: usb: add kmod-usb-gadget-ncm   LEDE Commits
• [openwrt/openwrt] layerscape: armv8_64b: enable CONFIG_ARM_PSCI_CPUIDLE   LEDE Commits
• [openwrt/openwrt] ipq806x: fix LAN and WAN port assignments on TP-Link AD7200   LEDE Commits
• [openwrt/openwrt] toolchain: gdb: Add optional python support   LEDE Commits
• [openwrt/openwrt] tools/isl: bump to 0.24   LEDE Commits
• [openwrt/openwrt] ipq40xx: add uboot-envtools to default packages   LEDE Commits
• [openwrt/openwrt] mvebu: armada-37xx: remove ethernet alias patch   LEDE Commits
• [openwrt/openwrt] kernel: package Synopsys Designware PCI to I2C controller   LEDE Commits
• [openwrt/openwrt] x86: add Roqos Core RC10 ethernet interfaces   LEDE Commits
• [openwrt/openwrt] linux-firmware: update to version 20210315 and trim down broadcom FW   LEDE Commits
• [openwrt/openwrt] mt76: update to the latest version   LEDE Commits
• [openwrt/openwrt] mac80211: Update to backports-5.10.42   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.4 to 5.4.124   LEDE Commits
• [openwrt/openwrt] mac80211: Update to backports-5.10.42   LEDE Commits
• [openwrt/openwrt] kernel: bump 4.14 to 4.14.235   LEDE Commits
• [openwrt/openwrt] mac80211: Update to backports version 4.19.193-test1   LEDE Commits
• [openwrt/openwrt] ath79: add support for Devolo dLAN pro 1200+ WiFi ac   LEDE Commits
• [openwrt/openwrt] ramips: add support for the Wavlink WL-WN579X3   LEDE Commits
• [openwrt/openwrt] kirkwood: Add support for Sheevaplug   LEDE Commits
• [openwrt/openwrt] uboot-kirkwood: refresh patches   LEDE Commits
• [openwrt/openwrt] treewide: do not quote compatible in shell scripts   LEDE Commits
• [openwrt/openwrt] ramips: Add support for SERCOMM NA502   LEDE Commits
• [openwrt/openwrt] ath79: add support for NEC Aterm WF1200CR   LEDE Commits
• [openwrt/openwrt] ath79: Support for Ubiquiti Rocket 5AC Lite   LEDE Commits
• [openwrt/openwrt] ath79: fix eth0 PLL registers on WD My Net Wi-Fi Range Extender   LEDE Commits
• [openwrt/openwrt] ugps: update to git HEAD   LEDE Commits
• [openwrt/openwrt] ethtool: update to version 5.12   LEDE Commits
• [openwrt/openwrt] generic: backport at803x fixes   LEDE Commits
• [openwrt/openwrt] linux-firmware: update to 20210511   LEDE Commits
• [openwrt/openwrt] ramips: make PHY initialization more descriptive   LEDE Commits
• [openwrt/openwrt] ramips: mt7620: enable autonegotiation for all ports   LEDE Commits
• [openwrt/openwrt] ramips: fix patch location   LEDE Commits
• [openwrt/openwrt] scripts/feeds: generate index after all feeds are updated   LEDE Commits
• [openwrt/openwrt] ipq806x: fix LAN and WAN port assignments on TP-Link AD7200   LEDE Commits
• [openwrt/openwrt] ipq40xx: add uboot-envtools to default packages   LEDE Commits
• [openwrt/openwrt] x86: kernel: enable Fusion-MPT SAS driver   LEDE Commits
• [openwrt/openwrt] umbim: fix return value of proto_mbim_setup()   LEDE Commits
• [openwrt/openwrt] glibc: update to latest 2.33 HEAD (BZ #27892)   LEDE Commits
• [openwrt/openwrt] wireless-regdb: update to version 2021.04.21   LEDE Commits
• [openwrt/openwrt] build: fix build for devices without initramfs   LEDE Commits
• [openwrt/openwrt] treewide: make AddDepends/usb-serial selective   LEDE Commits
• [openwrt/openwrt] toolchain/gdb: fix broken non-python build   LEDE Commits
• [openwrt/openwrt] ramips: fix Ethernet random MAC address for HILINK HLK-7628N   LEDE Commits
• [openwrt/openwrt] ramips: mt7620: add kernel size for Jboot devices   LEDE Commits
• [openwrt/openwrt] ramips: mt7620: disable Jboot devices build   LEDE Commits
• [openwrt/openwrt] ramips: fix LAN LED trigger assignment for Xiaomi Router 3 Pro   LEDE Commits
• [openwrt/openwrt] iwinfo: update to the latest version   LEDE Commits
• [openwrt/openwrt] mac80211: rely on iwinfo for phy->path and path->phy lookups   LEDE Commits
• [openwrt/openwrt] x86: add upgrade support to diag.sh   LEDE Commits
• [openwrt/openwrt] uboot-rockchip: add NanoPi R4S support   LEDE Commits
• [openwrt/openwrt] rockchip: add NanoPi R4S support   LEDE Commits
• [openwrt/openwrt] firmware-utils: zytrx: Add util for ZyXEL specific header   LEDE Commits
• [openwrt/openwrt] firmware-utils: fix coverity zytrx.c resource leak   LEDE Commits
• [openwrt/openwrt] ramips: mt7621: Add support for ZyXEL NR7101   LEDE Commits
• [openwrt/openwrt] ramips: add support for TP-Link Archer A6 v3   LEDE Commits
• [openwrt/openwrt] ramips: add support for TP-Link Archer C6U v1 (EU)   LEDE Commits
• [openwrt/openwrt] ramips: add support for cudy WR2100   LEDE Commits
• [openwrt/openwrt] ramips: add support for JCG Q20   LEDE Commits
• [openwrt/openwrt] ramips: add support for Linksys E5600   LEDE Commits
• [openwrt/openwrt] ramips: add support for Amped Wireless ALLY router and extender   LEDE Commits
• [openwrt/openwrt] ramips: add support for Linksys EA8100 v1   LEDE Commits
• [openwrt/openwrt] ramips: Add support for SERCOMM NA502   LEDE Commits
• [openwrt/openwrt] ath79: rename 'engenius' Makefile definitions to 'senao'   LEDE Commits
• [openwrt/openwrt] ath79: create common DTSI for Senao ar724x APs   LEDE Commits
• [openwrt/openwrt] ath79: create common DTSI for Senao ar934x APs   LEDE Commits
• [openwrt/openwrt] ath79: create common DTSI for Senao qca955x APs   LEDE Commits
• [openwrt/openwrt] ath79: lzma-loader: allow setting custom kernel magic   LEDE Commits
• [openwrt/openwrt] ath79: remove 'fakeroot' for Senao devices   LEDE Commits
• [openwrt/openwrt] ath79: adjust ath79/tiny Senao APs to 4k blocksize   LEDE Commits
• [openwrt/openwrt] ath79: add Senao 'failsafe' sysupgrade procedure   LEDE Commits
• [openwrt/openwrt] ath79: add factory.bin for ALLNET ALL-WAP02860AC   LEDE Commits
• [openwrt/openwrt] ath79: cleanup DTS for ALLNET ALL-WAP02860AC   LEDE Commits
• [openwrt/openwrt] ath79: move pcie node to DTSI for qca955x Senao APs   LEDE Commits
• [openwrt/openwrt] ath79: set lzma-loader variables to null by default   LEDE Commits
• [openwrt/openwrt] ci: build test ath79/generic   LEDE Commits
• [openwrt/openwrt] Revert "ci: build test ath79/generic"   LEDE Commits
• [openwrt/openwrt] mac80211: improve rate control performance   LEDE Commits
• [openwrt/openwrt] mac80211: add support for 802.3 encap offload with software rate control   LEDE Commits
• [openwrt/openwrt] u-boot: support verbose build   LEDE Commits
• [openwrt/openwrt] build: add ninja build tool and make it available for cmake   LEDE Commits
• [openwrt/openwrt] package: fix cmake packages build with ninja   LEDE Commits
• [openwrt/openwrt] build: use ninja for cmake packages by default   LEDE Commits
• [openwrt/openwrt] ath79: fix eth0 PLL registers on WD My Net Wi-Fi Range Extender   LEDE Commits
• [openwrt/openwrt] ramips: fix Ethernet random MAC address for HILINK HLK-7628N   LEDE Commits
• [openwrt/openwrt] ramips: fix LAN LED trigger assignment for Xiaomi Router 3 Pro   LEDE Commits
• [openwrt/openwrt] ramips: mt7620: add kernel size for Jboot devices   LEDE Commits
• [openwrt/openwrt] tools: fix dependencies of cmake packages   LEDE Commits
• [openwrt/openwrt] tools: build ninja before ccache to fix the build order   LEDE Commits
• [openwrt/openwrt] build: do not override DESTDIR for cmake ninja host builds   LEDE Commits
• [openwrt/openwrt] README: update routing.git URL   LEDE Commits
• [openwrt/openwrt] README: switch from freenode to oftc   LEDE Commits
• [openwrt/openwrt] README: update routing.git URL   LEDE Commits
• [openwrt/openwrt] README: switch from freenode to oftc   LEDE Commits
• [openwrt/openwrt] base-files: upgrade: use procd to kill managed daemons   LEDE Commits
• [openwrt/openwrt] prereq-build: diff requirement to GNU   LEDE Commits
• [openwrt/openwrt] ramips: add support for TP-Link Archer C6 v3   LEDE Commits
• [openwrt/openwrt] generic: kernel 5.4: fix probe error for AR803x PHYs   LEDE Commits
• [openwrt/openwrt] apm821xx: move CONFIG_REGULATOR to target config   LEDE Commits
• [openwrt/openwrt] odhcpd: update to latest git HEAD   LEDE Commits
• [openwrt/openwrt] ath79: add support for TP-Link TL-WR841HP v3   LEDE Commits
• [openwrt/openwrt] tegra: refresh kernel config   LEDE Commits
• [openwrt/openwrt] tegra: copy files for kernel 5.10   LEDE Commits
• [openwrt/openwrt] tegra: add support for kernel 5.10   LEDE Commits
• [openwrt/openwrt] kernel: move some drm symbols to generic config   LEDE Commits
• [openwrt/openwrt] treewide: mark selected packages nonshared   LEDE Commits
• [openwrt/openwrt] opkg: Fix download over git   LEDE Commits
• [openwrt/openwrt] opkg: update to git HEAD   LEDE Commits
• [openwrt/openwrt] treewide: mark selected packages nonshared   LEDE Commits
• [openwrt/openwrt] opkg: update to git HEAD   LEDE Commits
• [openwrt/openwrt] ramips: refresh at803x patch   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.10 to 5.10.43   LEDE Commits
• [openwrt/openwrt] kernel: bump 4.14 to 4.14.236   LEDE Commits
• [openwrt/openwrt] gitignore: add .ccache folder   LEDE Commits
• [openwrt/openwrt] build: prepend ABI suffixes with a dash if package name ends with digit   LEDE Commits
• [openwrt/openwrt] base-files: set MAC for bridge ports (devices) instead of bridge itself   LEDE Commits
• [openwrt/openwrt] OpenWrt v21.02.0-rc3: adjust config defaults   LEDE Commits
• [openwrt/openwrt] OpenWrt v21.02.0-rc3: revert to branch defaults   LEDE Commits
• [openwrt/openwrt] base-files: fix typo in config_generate MAC check   LEDE Commits
• [openwrt/openwrt] build: ensure that dash isn't prepended twice to abi version suffix   LEDE Commits
• [openwrt/openwrt] ugps: start also in case device is absent   LEDE Commits
• [openwrt/openwrt] ugps: update to git HEAD   LEDE Commits
• [openwrt/openwrt] ugps: start also in case device is absent   LEDE Commits
• [openwrt/openwrt] build: preserve profiles.json between builds   LEDE Commits
• [openwrt/openwrt] mac80211: fix processing HE capabilities (FS#3871)   LEDE Commits
• [openwrt/openwrt] mac80211: select iwinfo   LEDE Commits
• [openwrt/openwrt] mac80211: fix minstrel sample time check   LEDE Commits
• [openwrt/openwrt] mac80211: sync nl80211.h with upstream and backport a WPA3 related commit   LEDE Commits
• [openwrt/openwrt] mt76: update to the latest version   LEDE Commits
• [openwrt/openwrt] iw: update to 8fab0c9e   LEDE Commits
• [openwrt/openwrt] mac80211: fix minstrel sample time check   LEDE Commits
• [openwrt/openwrt] mac80211: system hang caused by deferring calls into minstrel to dequeue   LEDE Commits
• [openwrt/openwrt] ath79: use dynamic partitioning for TP-Link CPE series   LEDE Commits
• [openwrt/openwrt] mac80211: remove patches stripping down crypto support   LEDE Commits
• [openwrt/openwrt] kernel: make cryptoapi support needed by mac80211 built-in   LEDE Commits
• [openwrt/openwrt] mac80211: remove extra patch accidentally added during rebase   LEDE Commits
• [openwrt/openwrt] kernel: disable CONFIG_PCIE_BUS_PERFORMANCE   LEDE Commits
• [openwrt/openwrt] mac80211: fix an issue with wds links on 802.11ax devices   LEDE Commits
• [openwrt/openwrt] mac80211: fix an issue with wds links on 802.11ax devices   LEDE Commits
• [openwrt/openwrt] tools/ccache: update to 4.3   LEDE Commits
• [openwrt/openwrt] build: Config-images: fix unit of partition sizes   LEDE Commits
• [openwrt/openwrt] firmware-utils: tplink-safeloader: support Archer A6 v3 CA   LEDE Commits
• [openwrt/openwrt] treewide: remove BUILD_PARALLEL from CMake packages   LEDE Commits
• [openwrt/openwrt] treewide: remove PKG_INSTALL from CMake packages   LEDE Commits
• [openwrt/openwrt] ramips: reorganize DTSI files for D-Link DIR-8xx   LEDE Commits
• [openwrt/openwrt] ramips: clean up dlink_dir-8xx-r1 recipe   LEDE Commits
• [openwrt/openwrt] grub2: make grub2-bios-setup as a separate package   LEDE Commits
• [openwrt/openwrt] grub2: make grub2 tools built in a separate variant   LEDE Commits
• [openwrt/openwrt] grub2: pass compilation parameters more accurately   LEDE Commits
• [openwrt/openwrt] uhttpd: make organization (O=) of the cert configurable via uci   LEDE Commits
• [openwrt/openwrt] hostapd: stop advertising 11w feature   LEDE Commits
• [openwrt/openwrt] busybox: disable bzip2   LEDE Commits
• [openwrt/openwrt] base-files: upgrade: use zcat command provided by busybox   LEDE Commits
• [openwrt/openwrt] base-files: add syslog logging for v function   LEDE Commits
• [openwrt/openwrt] base-files: change logging for upgrade on stage2   LEDE Commits
• [openwrt/openwrt] base-files: remove unused vn and _vn function   LEDE Commits
• [openwrt/openwrt] base-files: redirect kill ouptut for ash, telnetd and dropbear   LEDE Commits
• [openwrt/openwrt] tools/libressl: update to 3.3.3   LEDE Commits
• [openwrt/openwrt] hostapd: add support for setting sae_pwe   LEDE Commits
• [openwrt/openwrt] tools/e2fsprogs: update to 1.46.2   LEDE Commits
• [openwrt/openwrt] tools/squashfskit4: fix compilation under big endian   LEDE Commits
• [openwrt/openwrt] tools/cmake: update to 3.20.3 + build with Ninja   LEDE Commits
• [openwrt/openwrt] bcm4908: add kmod-gpio-button-hotplug   LEDE Commits
• [openwrt/openwrt] qos-scripts: add ifbN device before setting the link up   LEDE Commits
• [openwrt/openwrt] qos-scripts: add ifbN device before setting the link up   LEDE Commits
• [openwrt/openwrt] build,json: fix generation with empty profiles   LEDE Commits
• [openwrt/openwrt] ath79: add gpio-latch driver for MikroTik RouterBOARDs   LEDE Commits
• [openwrt/openwrt] ath79: add NAND driver for MikroTik RB91xG series   LEDE Commits
• [openwrt/openwrt] ath79: add support for MikroTik RouterBOARD 912UAG-2HPnD   LEDE Commits
• [openwrt/openwrt] ath79: ar934x: fix mounting issues if subpage is not supported   LEDE Commits
• [openwrt/openwrt] build: create profiles.json per default   LEDE Commits
• [openwrt/openwrt] ath10k-ct: fix typo in Makefile   LEDE Commits
• [openwrt/openwrt] uci: add uci_revert function   LEDE Commits
• [openwrt/openwrt] kernel/modules: make sure igb loads at boot   LEDE Commits
• [openwrt/openwrt] grub2: update to 2.06   LEDE Commits
• [openwrt/openwrt] build: preserve profiles.json between builds   LEDE Commits
• [openwrt/openwrt] build,json: fix generation with empty profiles   LEDE Commits
• [openwrt/openwrt] ath79: don't autodetect AR8033 PHY capabilities   LEDE Commits
• [openwrt/openwrt] wolfssl: always export wc_ecc_set_rng   LEDE Commits
• [openwrt/openwrt] hostapd: wolfssl: add RNG to EC key   LEDE Commits
• [openwrt/openwrt] ath79: add missing GPIO_LATCH symbol   LEDE Commits
• [openwrt/openwrt] ustream-ssl: variants conflict with each other   LEDE Commits
• [openwrt/openwrt] hostapd: make country3 option configurable   LEDE Commits
• [openwrt/openwrt] hostapd: fix handling of the channel utilization options   LEDE Commits
• [openwrt/openwrt] bcm4908: fix Ethernet broken state after interface restart   LEDE Commits
• [openwrt/openwrt] base-files: set MAC for bridge ports (devices) instead of bridge itself   LEDE Commits
• [openwrt/openwrt] base-files: fix typo in config_generate MAC check   LEDE Commits
• [openwrt/openwrt] bcm4908: add kmod-gpio-button-hotplug   LEDE Commits
• [openwrt/openwrt] bcm4908: fix Ethernet broken state after interface restart   LEDE Commits
• [openwrt/openwrt] bcm63xx-cfe: update to the latest master   LEDE Commits
• [openwrt/openwrt] base-files: fix enabled for services with only STOP   LEDE Commits
• [openwrt/openwrt] hostapd: fix handling of the channel utilization options   LEDE Commits
• [openwrt/openwrt] hostapd: make wnm_sleep_mode_no_keys configurable   LEDE Commits
• [openwrt/openwrt] realtek: Fix buffer length calculation on RTL8380 with CRC offload   LEDE Commits
• [openwrt/openwrt] kernel: crypto: limit crypto-hw-hifn-795x to devices with pci support   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.10 to 5.10.44   LEDE Commits
• [openwrt/openwrt] kernel-5.4: backport latest patches for wireguard   LEDE Commits
• [openwrt/openwrt] kernel: Backport patch to automatically bring up DSA master when opening user port   LEDE Commits
• [openwrt/openwrt] base-files: failsafe: Fix IP configuration   LEDE Commits
• [openwrt/openwrt] base-files: failsafe: Remove the VLAN modifier from interface name   LEDE Commits
• [openwrt/openwrt] realtek: Fix failsafe mode   LEDE Commits
• [openwrt/openwrt] base-files: bring up vlan interface too   LEDE Commits
• [openwrt/openwrt] kernel-5.4: backport latest patches for wireguard   LEDE Commits
• [openwrt/openwrt] kernel: Backport patch to automatically bring up DSA master when opening user port   LEDE Commits
• [openwrt/openwrt] base-files: failsafe: Fix IP configuration   LEDE Commits
• [openwrt/openwrt] base-files: failsafe: Remove the VLAN modifier from interface name   LEDE Commits
• [openwrt/openwrt] realtek: Fix failsafe mode   LEDE Commits
• [openwrt/openwrt] exfat: update to 5.12.3   LEDE Commits
• [openwrt/openwrt] ramips: mt7620: simplify DTS properties for GMAC   LEDE Commits
• [openwrt/openwrt] ramips: mt7620: remove useless GMAC nodes   LEDE Commits
• [openwrt/openwrt] ramips: mt7620: fix ethernet driver GMAC port init   LEDE Commits
• [openwrt/openwrt] ramips: mt7620: allow both internal and external PHYs   LEDE Commits
• [openwrt/openwrt] ramips: mt7620: use DTS to set PHY base address for external PHYs   LEDE Commits
• [openwrt/openwrt] ramips: mt7620: move mt7620_mdio_mode() to ethernet driver   LEDE Commits
• [openwrt/openwrt] ramips: mt7620: add ephy-disable option to switch driver   LEDE Commits
• [openwrt/openwrt] ramips: mt7620: fix RGMII TXID PHY mode   LEDE Commits
• [openwrt/openwrt] ramips: mt7620: ethernet: use more macros and bump version   LEDE Commits
• [openwrt/openwrt] ramips: mt7620: disable SOC VLANs for external switches   LEDE Commits
• [openwrt/openwrt] ramips: add missing "pinctrl-names" for Youku YK1   LEDE Commits
• [openwrt/openwrt] ramips: fix software reboot failure on HILINK HLK-7628N   LEDE Commits
• [openwrt/openwrt] mac80211: distance config: allow "auto" as a value   LEDE Commits
• [openwrt/openwrt] base-files: fix zoneinfo support   LEDE Commits
• [openwrt/openwrt] hostapd: add default_disabled option to the supplicant   LEDE Commits
• [openwrt/openwrt] base-files: fix zoneinfo support   LEDE Commits
• [openwrt/openwrt] base-files: fix zoneinfo support   LEDE Commits
• [openwrt/openwrt] ipq40xx: specify FritzBox 7530 LAN port label numbers   LEDE Commits
• [openwrt/openwrt] hostapd: add support for providing vendor specific IE elements   LEDE Commits
• [openwrt/openwrt] zram-swap: robustify mkswap/swapon/swapoff invocation   LEDE Commits
• [openwrt/openwrt] base-files: fix /tmp/TZ when zoneinfo not installed   LEDE Commits
• [openwrt/openwrt] ramips: ethernet: ralink: add struct fe_priv as context to fe_reset()   LEDE Commits
• [openwrt/openwrt] ramips: ethernet: ralink: add fe_reset_fe() to reset fe via reset controller   LEDE Commits
• [openwrt/openwrt] ramips: ethernet: ralink: use the reset controller api for esw & ephy   LEDE Commits
• [openwrt/openwrt] ramips: ethernet: ralink: move reset of the esw into the esw instead of fe   LEDE Commits
• [openwrt/openwrt] ramips: ethernet: ralink: allow to return EPROBE_DEFER on switch_init   LEDE Commits
• [openwrt/openwrt] ramips: ethernet: ralink: rewrite esw_rt3050 to support link states   LEDE Commits
• [openwrt/openwrt] base-files: fix /tmp/TZ when zoneinfo not installed   LEDE Commits
• [openwrt/openwrt] base-files: fix /tmp/TZ when zoneinfo not installed   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.10 to 5.10.46   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.4 to 5.4.125   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.4 to 5.4.126   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.4 to 5.4.127   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.4 to 5.4.128   LEDE Commits
• [openwrt/openwrt] dnsmasq: Update to version 2.86test3   LEDE Commits
• [openwrt/openwrt] dnsmasq: add config option for connmark DNS filtering   LEDE Commits
• [openwrt/openwrt] Revert "dnsmasq: add config option for connmark DNS filtering"   LEDE Commits
• [openwrt/openwrt] Revert "dnsmasq: Update to version 2.86test3"   LEDE Commits
• [openwrt/openwrt] libusb: Fix parsing of descriptors for multi-configuration devices   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.4 to 5.4.128   LEDE Commits
• [openwrt/openwrt] dante: move to packages.git   LEDE Commits
• [openwrt/openwrt] generic: at803x: mask 1000 Base-X link mode   LEDE Commits
• [openwrt/openwrt] ramips: fix AR8033 fiber operation   LEDE Commits
• [openwrt/openwrt] glibc: update to latest 2.33 HEAD (BZ #27646, bug 27896, BZ #15271)   LEDE Commits
• [openwrt/openwrt] iwinfo: update to latest Git HEAD   LEDE Commits
• [openwrt/openwrt] iwinfo: update to latest Git HEAD   LEDE Commits
• [openwrt/openwrt] ramips: add AW9523 I2C GPIO expander driver   LEDE Commits
• [openwrt/openwrt] ramips: add support for Tenbay T-MB5EU-V01   LEDE Commits
• [openwrt/openwrt] busybox: sysntpd: option to bind server to iface   LEDE Commits
• [openwrt/openwrt] busybox: sysntpd: add trigger to reload server   LEDE Commits
• [openwrt/openwrt] ipq40xx: add missing case closing symbol   LEDE Commits
• [openwrt/openwrt] ipq806x: refresh config for kernel 5.4   LEDE Commits
• [openwrt/openwrt] zram-swap: set the zram swap priority to 100 by default   LEDE Commits
• [openwrt/openwrt] zram-swap: clean up the log messages   LEDE Commits
• [buildbot] Bump to latest Buildbot release 3.2.0   LEDE Commits
• [openwrt/openwrt] ath79: mikrotik: remove rb912 gpio-beeper module dependency   LEDE Commits
• [openwrt/openwrt] iwinfo: update to the latest version   LEDE Commits
• [openwrt/openwrt] mac80211: fix no_reload logic (FS#3902)   LEDE Commits
• [openwrt/openwrt] mac80211: always call wireless_set_data (FS#3784)   LEDE Commits
• [openwrt/openwrt] mac80211: print an error if wifi teardown fails   LEDE Commits
• [openwrt/openwrt] base-files: wifi: swap the order of some ubus calls   LEDE Commits
• [openwrt/openwrt] base-files: wifi: tidy up the reconf code   LEDE Commits
• [openwrt/openwrt] dnsmasq: distinct Ubus names for multiple instances   LEDE Commits
• [openwrt/openwrt] mac80211: fix a regression in starting aggregation sessions on mesh interfaces   LEDE Commits
• [openwrt/openwrt] busybox: sysntpd: add trigger to reload server   LEDE Commits
• [openwrt/openwrt] mac80211: backport fix for nl80211 control port tx (fixes FS#3857)   LEDE Commits
• [openwrt/openwrt] mac80211: improve rate control performance   LEDE Commits
• [openwrt/openwrt] mac80211: add support for 802.3 encap offload with software rate control   LEDE Commits
• [openwrt/openwrt] mac80211: backport fix for nl80211 control port tx (fixes FS#3857)   LEDE Commits
• [openwrt/openwrt] mac80211: fix no_reload logic (FS#3902)   LEDE Commits
• [openwrt/openwrt] mac80211: always call wireless_set_data (FS#3784)   LEDE Commits
• [openwrt/openwrt] mac80211: print an error if wifi teardown fails   LEDE Commits
• [openwrt/openwrt] base-files: wifi: swap the order of some ubus calls   LEDE Commits
• [openwrt/openwrt] base-files: wifi: tidy up the reconf code   LEDE Commits
• [openwrt/openwrt] ath79: add support for Teltonika RUT230 v1   LEDE Commits
• [openwrt/openwrt] ubus: update to the latest version   LEDE Commits
• [openwrt/openwrt] ubus: update to the latest version   LEDE Commits
• [openwrt/openwrt] ipq806x: fix missing changes in 5.4 for new cpufreq implementation   LEDE Commits
• [openwrt/openwrt] ipq806x: fix missing 1.4ghz cache freq for ipq8065 SoC   LEDE Commits
• [openwrt/openwrt] ipq806x: fix dedicated cpufreq driver   LEDE Commits
• [openwrt/openwrt] ltq-deu: Mark lantiq DEU broken   LEDE Commits

Last message date: Wed Jun 30 14:24:20 PDT 2021
Archived on: Wed Jun 30 14:24:29 PDT 2021

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...