[openwrt/openwrt] ramips: mt7620: add ephy-disable option to switch driver
LEDE Commits
lede-commits at lists.infradead.org
Tue Jun 22 23:23:26 PDT 2021
981213 pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/cc6fd6fbb505071e08011f7998afaffefcf08fd3
commit cc6fd6fbb505071e08011f7998afaffefcf08fd3
Author: Michael Pratt <mcpratt at pm.me>
AuthorDate: Mon May 31 03:56:20 2021 -0400
ramips: mt7620: add ephy-disable option to switch driver
Add back the register write to disable internal PHYs
as a separate option in the code that can be set using a DTS property.
Set the option to true by default
when an external mt7530 switch is identified.
This makes the driver more in sync with original SDK code
while keeping the lines separated into different options
to accommodate any board with any PHY layout.
Signed-off-by: Michael Pratt <mcpratt at pm.me>
---
.../ramips/files/drivers/net/ethernet/ralink/gsw_mt7620.c | 14 ++++++++++++--
.../ramips/files/drivers/net/ethernet/ralink/gsw_mt7620.h | 1 +
2 files changed, 13 insertions(+), 2 deletions(-)
diff --git a/target/linux/ramips/files/drivers/net/ethernet/ralink/gsw_mt7620.c b/target/linux/ramips/files/drivers/net/ethernet/ralink/gsw_mt7620.c
index 67f70f286d..ae90f0484d 100644
--- a/target/linux/ramips/files/drivers/net/ethernet/ralink/gsw_mt7620.c
+++ b/target/linux/ramips/files/drivers/net/ethernet/ralink/gsw_mt7620.c
@@ -73,7 +73,13 @@ static void mt7620_hw_init(struct mt7620_gsw *gsw)
/* Enable MIB stats */
mtk_switch_w32(gsw, mtk_switch_r32(gsw, GSW_REG_MIB_CNT_EN) | (1 << 1), GSW_REG_MIB_CNT_EN);
- if (gsw->ephy_base) {
+ if (gsw->ephy_disable) {
+ mtk_switch_w32(gsw, mtk_switch_r32(gsw, GSW_REG_GPC1) |
+ (gsw->ephy_base << 16) | (0x1f << 24),
+ GSW_REG_GPC1);
+
+ pr_info("gsw: internal ephy disabled\n");
+ } else if (gsw->ephy_base) {
mtk_switch_w32(gsw, mtk_switch_r32(gsw, GSW_REG_GPC1) |
(gsw->ephy_base << 16),
GSW_REG_GPC1);
@@ -194,13 +200,17 @@ int mtk_gsw_init(struct fe_priv *priv)
gsw = platform_get_drvdata(pdev);
priv->soc->swpriv = gsw;
+ gsw->ephy_disable = of_property_read_bool(np, "mediatek,ephy-disable");
+
mdiobus_node = of_get_child_by_name(eth_node, "mdio-bus");
if (mdiobus_node) {
for_each_child_of_node(mdiobus_node, phy_node) {
id = of_get_property(phy_node, "reg", NULL);
if (id && (be32_to_cpu(*id) == 0x1f))
- of_node_put(mdiobus_node);
+ gsw->ephy_disable = true;
}
+
+ of_node_put(mdiobus_node);
}
gsw->port4_ephy = !of_property_read_bool(np, "mediatek,port4-gmac");
diff --git a/target/linux/ramips/files/drivers/net/ethernet/ralink/gsw_mt7620.h b/target/linux/ramips/files/drivers/net/ethernet/ralink/gsw_mt7620.h
index 91a0399976..fde7792c02 100644
--- a/target/linux/ramips/files/drivers/net/ethernet/ralink/gsw_mt7620.h
+++ b/target/linux/ramips/files/drivers/net/ethernet/ralink/gsw_mt7620.h
@@ -92,6 +92,7 @@ struct mt7620_gsw {
struct device *dev;
void __iomem *base;
int irq;
+ bool ephy_disable;
bool port4_ephy;
unsigned long int autopoll;
u16 ephy_base;
More information about the lede-commits
mailing list