[openwrt/openwrt] ath79: add support for TP-Link TL-WR841HP v3
LEDE Commits
lede-commits at lists.infradead.org
Sun Jun 13 14:30:16 PDT 2021
adrian pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/c5235f6b2441a6b531622b76b66c354896c0dae0
commit c5235f6b2441a6b531622b76b66c354896c0dae0
Author: Andy Lee <congquynh284 at yahoo.com>
AuthorDate: Sun May 23 20:02:19 2021 +0700
ath79: add support for TP-Link TL-WR841HP v3
Specifications:
- QCA9533 SoC, 8 MB nor flash, 64 MB DDR2 RAM
- 2x2 9dBi antenna, wifi 2.4Ghz 300Mbps
- 4x Ethernet LAN 10/100, 1x Ethernet WAN 10/100
- 1x WAN, LAN, Wifi, PWR, WPS, RE Leds
- Reset, Wifi on/off, WPS, RE buttons
- Serial UART at J4 onboard: 3.3v GND RX TX, 1152008N1
Label MAC addresses based on vendor firmware:
LAN *:ea label
WAN *:eb label +1
2.4 GHz *:ea label
The label MAC address in found in u-boot 0x1fc00
Installation:
Upload openwrt-ath79-generic-tplink_tl-wr841hp-v3-squashfs-factory.bin
from stock firmware webgui.
Maybe we need rename to shorten file name due to stock webgui error.
Revert back to stock firmware instructions:
- set your PC to static IP address 192.168.0.66 netmask 255.255.255.0
- download stock firmware from Tp-link website
- put it in the root directory of tftp server software
- rename it to wr841hpv3_tp_recovery.bin
- power on while pressing Reset button until any Led is lighting up
- wait for the router to reboot. done
Forum support topic:
https://forum.openwrt.org/t/support-for-tp-link-tl-wr841hp-v3-router
Signed-off-by: Andy Lee <congquynh284 at yahoo.com>
[rebase and squash]
Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>
---
.../ath79/dts/qca9533_tplink_tl-wr841hp-v3.dts | 146 +++++++++++++++++++++
.../ath79/generic/base-files/etc/board.d/01_leds | 3 +-
.../generic/base-files/etc/board.d/02_network | 3 +-
target/linux/ath79/image/generic-tp-link.mk | 9 ++
4 files changed, 159 insertions(+), 2 deletions(-)
diff --git a/target/linux/ath79/dts/qca9533_tplink_tl-wr841hp-v3.dts b/target/linux/ath79/dts/qca9533_tplink_tl-wr841hp-v3.dts
new file mode 100644
index 0000000000..7170601f6a
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_tplink_tl-wr841hp-v3.dts
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "tplink,tl-wr841hp-v3", "qca,qca9533";
+ model = "TP-Link TL-WR841HP v3";
+
+ aliases {
+ label-mac-device = &wmac;
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wifi {
+ label = "green:wifi";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ led_power: power {
+ label = "green:power";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wan_green {
+ label = "green:wan";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_amber {
+ label = "amber:wan";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "green:lan";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "green:wps";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ re {
+ label = "green:re";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ wifi {
+ label = "WiFi button";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ label = "WPS button";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ re {
+ label = "RE button";
+ linux,code = <BTN_0>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash at 0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition at 0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition at 20000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x020000 0x7d0000>;
+ };
+
+ art: partition at 7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+ mtd-mac-address-increment = <1>;
+};
+
+ð1 {
+ mtd-mac-address = <&uboot 0x1fc00>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&uboot 0x1fc00>;
+};
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
index 9720e37f99..d8e3d65967 100644
--- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
@@ -71,7 +71,8 @@ tplink,archer-c59-v1|\
tplink,archer-c59-v2|\
tplink,archer-c60-v1|\
tplink,archer-c60-v2|\
-tplink,archer-c60-v3)
+tplink,archer-c60-v3|\
+tplink,tl-wr841hp-v3)
ucidef_set_led_switch "lan" "LAN" "green:lan" "switch0" "0x1e"
ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1"
;;
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index c1ba760182..2fa51ab905 100644
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -195,7 +195,8 @@ ath79_setup_interfaces()
;;
comfast,cf-e560ac|\
qca,ap143-8m|\
- qca,ap143-16m)
+ qca,ap143-16m|\
+ tplink,tl-wr841hp-v3)
ucidef_set_interface_wan "eth1"
ucidef_add_switch "switch0" \
"0 at eth0" "1:lan" "2:lan" "3:lan" "4:lan"
diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk
index be6aa06b55..8b228a73d2 100644
--- a/target/linux/ath79/image/generic-tp-link.mk
+++ b/target/linux/ath79/image/generic-tp-link.mk
@@ -742,6 +742,15 @@ define Device/tplink_tl-wr810n-v2
endef
TARGET_DEVICES += tplink_tl-wr810n-v2
+define Device/tplink_tl-wr841hp-v3
+ $(Device/tplink-8mlzma)
+ SOC := qca9533
+ DEVICE_MODEL := TL-WR841HP
+ DEVICE_VARIANT := v3
+ TPLINK_HWID := 0x08411003
+endef
+TARGET_DEVICES += tplink_tl-wr841hp-v3
+
define Device/tplink_tl-wr842n-v1
$(Device/tplink-8m)
SOC := ar7241
More information about the lede-commits
mailing list