March 2012 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Thu Mar 1 00:55:32 PST 2012
Ending: Sat Mar 31 15:29:08 PDT 2012
Messages: 115

• [PATCH] Create DBus getter/setter for ScanInterval   Mukesh Agrawal
• [PATCH] Filter input parameters in p2p_serv_disc_external   Grzegorz Bajorski
• [PATCH] AP: remove ssi_signal from ap_info   Johannes Berg
• [PATCH] pass signal strength through, fix units   Johannes Berg
• [PATCH] DBus: add ability to report probe requests   Johannes Berg
• [PATCH] driver_nl80211: report signal strength from nl80211   Johannes Berg
• [RFC 2/4] P2P: Handling single channel concurrency   Johannes Berg
• [PATCH] debug: add option to log to tracing   Johannes Berg
• how to save the output of hostapd   Ognjen Bezanov
• [P2P] p2p_peer oper_freq update on group formation/termination   Bartosz Sławomir Białek
• EAP TTLS peer_challenge buffer allocation   Kaustav Dey Biswas
• Channel 165 not allowed for P2P   Kaustav Dey Biswas
• Is there any STA simulator for hostapd performance testing?   Li Chao
• hostap-1.0-rc3 update   Angie Chinchilla
• wpa supplicant roaming issues   Fabio Coatti
• [PATCH] hostapd: only update already-set beacons when processing OLBC   Luciano Coelho
• [PATCH] Fix double free in a wpa enterprise setup, after a client is connecting and hostapd can not reach radius server. It will double free while retransmitting the radius package.   Alexander Couzens
• Broadcast issue   Jens Dackenberg
• Broadcast issue   Jens Dackenberg
• Setting hw_mode with some specific options (b&g mode, n mode only etc.) through hostapd   DarshanPrajapati
• Can it be possible to set txpower of AP by using hostapd   DarshanPrajapati
• non-HT bitrate after interface down   Genya
• Can we remove the eloop exception listener?   Ben Greear
• [PATCH] P2P: Add error message for invalid PIN   Masashi Honma
• [PATCH] Select the BSD license terms as the only license alternative   Masashi Honma
• [PATCH] P2P: Add error message for invalid PIN   Masashi Honma
• How to make a patch ?   Masashi Honma
• how to save the output of hostapd   Masashi Honma
• [RFC 1/4] P2P: Handling single channel concurrency   Jithu Jance
• [RFC 2/4] P2P: Handling single channel concurrency   Jithu Jance
• [RFC 3/4] P2P: Handling single channel concurrency   Jithu Jance
• [RFC 4/4] P2P: Handling single channel concurrency   Jithu Jance
• Config Methods for Probe Response   Takashi Kawamoto
• [PROPOSAL] Add hostapd.conf parameter to skip checkforneighboring BSS (prevent fallback in 150Mb mode)   Valeriy Kucherenko
• Setting hw_mode with some specific options (b&g mode, n mode onlyetc.) through hostapd   Valeriy Kucherenko
• [PROPOSAL] Add hostapd.conf parameter to skip checkforneighboringBSS (prevent fallback in 150Mb mode)   Valeriy Kucherenko
• Is wpasupplicant 0.7.3-6 compatible with 5Ghz band steering?   Marc MERLIN
• Is wpasupplicant 0.7.3-6 compatible with 5Ghz band steering?   Marc MERLIN
• Is wpasupplicant 0.7.3-6 compatible with 5Ghz band steering?   Marc MERLIN
• wpa_supplicant deauthentication frames   Jouni Malinen
• [PATCH] BSS: Fix use-after-realloc   Jouni Malinen
• [PATCH] Filter input parameters in p2p_serv_disc_external   Jouni Malinen
• [PATCH] P2P: Add error message for invalid PIN   Jouni Malinen
• [PATCH] AP: remove ssi_signal from ap_info   Jouni Malinen
• EAP TTLS peer_challenge buffer allocation   Jouni Malinen
• [PATCH] BSS: Fix use-after-realloc   Jouni Malinen
• [PATCH] Select the BSD license terms as the only license alternative   Jouni Malinen
• [PATCH v2] dbus: Make P2P group properties accessible individually   Jouni Malinen
• Query on channel configuration   Jouni Malinen
• [PATCH] P2P: ignore neg_req with the last used dialog_token   Jouni Malinen
• how to save the output of hostapd   Jouni Malinen
• Is complete support for 802.11r implemented in wext drivers   Jouni Malinen
• Unencrypted Beacons on Initialisation   Jouni Malinen
• No RADIUS packets noticed in wireshark   Jouni Malinen
• Channel 165 not allowed for P2P   Jouni Malinen
• Unencrypted Beacons on Initialisation   Jouni Malinen
• Config Methods for Probe Response   Jouni Malinen
• How to determine if WEP association was successful (using CLI)?   Jouni Malinen
• wpa supplicant roaming issues   Jouni Malinen
• [PATCH] debug: add option to log to tracing   Jouni Malinen
• Is wpasupplicant 0.7.3-6 compatible with 5Ghz band steering?   Jouni Malinen
• non-HT bitrate after interface down   Jouni Malinen
• [PATCH] Clean up: Replacing standard lib methods with os.h ones   Jouni Malinen
• [PATCH] P2P: Disconnect P2P group on supplicant deinit   Jouni Malinen
• Is wpasupplicant 0.7.3-6 compatible with 5Ghz band steering?   Jouni Malinen
• how to save the output of hostapd   David Martin
• hostapd with only virtual interfaces for BSSs possible?   David Martin
• how to save the output of hostapd   David Martin
• Unencrypted Beacons on Initialisation   Jonny Milliken
• Unencrypted Beacons on Initialisation   Jonny Milliken
• Unencrypted Beacons on Initialisation   Jonny Milliken
• Wireless Isoloation   Anand Moon
• [PATCH] BSS: Fix use-after-realloc   Eliad Peller
• [PATCH] P2P: Add deinit_p2p_cli op   Eliad Peller
• [PATCH] P2P: Add deinit_p2p_cli op   Eliad Peller
• [PATCH] P2P: Add deinit_p2p_cli op   Eliad Peller
• [PATCH] P2P: ignore neg_req with the last used dialog_token   Eliad Peller
• [PATCH] P2P: notify about disconnection only when needed   Eliad Peller
• [PATCH] BSS: Fix use-after-realloc   Eliad Peller
• [PATCH] P2P: ignore neg_req with the last used dialog_token   Eliad Peller
• hostapd + atheros 9285 pcie   Igor Pinotti
• IBSS Association and authentication timeout   Anders Nilsson Plymoth
• IBSS Association and authentication timeout   Anders Nilsson Plymoth
• [PATCH 4/8] Restore OpenSSL ENGINE support   Kenny Root
• [PATCH 2/8] Use keystore ENGINE for private key operations   Kenny Root
• Broadcast issue   Helmut Schaa
• Real System Make Money Easy 2012 Trend‏‏‏‏‏‏‏‏s‏‏   Geril Senem
• [PATCH] Add to bss command option RANGE=ALL|N1-N2 [MASK=0xH]   Dmitry Shmidt
• How to make a patch ?   Madhvapathi Sriram
• Station not connecting with WPS (2.0), open security using wpa supplicant.   Rajan Vijayaraghavan
• [PROPOSAL] Add hostapd.conf parameter to skip check forneighboring BSS (prevent fallback in 150Mb mode)   Alex Vorona
• bgscan? Can I scan while not connected to a network?   Ed W
• bgscan? Can I scan while not connected to a network?   Ed W
• How to determine if WEP association was successful (using CLI)?   Ed W
• Is wpasupplicant 0.7.3-6 compatible with 5Ghz band steering?   Ed W
• [PATCH] P2P: Add deinit_p2p_cli op   Vitaly Wool
• [PATCH] P2P: Add deinit_p2p_cli op   Vitaly Wool
• Certificate verification failed, error 19 (self signed certificate in certificate chain)   Michael Zintakis
• [PATCH] eloop/poll: Handle POLLER | POLLHUP in read logic.   greearb at candelatech.com
• Network died on laptop, 10-99th time   gene heskett
• Query on channel configuration   uday kiran
• Query on channel configuration   uday kiran
• [PATCH] Complete the support of P2P in the 5GHz band   fabienx.marotte at linux.intel.com
• No RADIUS packets noticed in wireshark   suneth namal
• No RADIUS packets noticed in wireshark   suneth namal
• Is complete support for 802.11r implemented in wext drivers   rupesh sanagapalli
• Doubts regarding implementing 802.11r   rupesh sanagapalli
• [PATCH] P2P: Disconnect P2P group on supplicant deinit   nirav shah
• [PATCH] Clean up: Replacing standard lib methods with os.h ones   nirav shah
• events not received on hostapd control event interface(Unix socket)   alfred steele
• events not received on hostapd control event interface(Unix socket)   alfred steele
• events not received on hostapd control event interface(Unix socket)   Bartosz.Markowski at tieto.com
• how to save the output of hostapd   why
• ralink, rt3070, with wpa_supplicant, donot support wps_pbc, wps_pin   郭同彬
• ralink, rt3070, with wpa_supplicant, donot support wps_pbc, wps_pin   郭同彬

Last message date: Sat Mar 31 15:29:08 PDT 2012
Archived on: Fri Oct 23 03:19:03 PDT 2015

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...