January 2013 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Wed Jan 2 05:06:24 EST 2013
Ending: Thu Jan 31 16:46:36 EST 2013
Messages: 606

• [PATCH 1/2] at91sam9x5ek: switch heartbeat to d2 (pioD21)   Sascha Hauer
• [PATCH] at91: add dump mux command   Sascha Hauer
• [PATCH 0/3] atmel nand/spi/udc: request gpio   Sascha Hauer
• [PATCH 00/13] at91: cleanup and switch core driver to device/driver   Sascha Hauer
• [PATCH 1/7] at91: add test commamd to emulate bootrom boot   Sascha Hauer
• [PATCH 3/7] at91: sam926x: switch lowlevel param to c code   Sascha Hauer
• [PATCH 02/13] at91: enable clock via clock framework   Sascha Hauer
• [PATCH 08/13] at91: PIT: switch to platfrom_driver   Sascha Hauer
• [PATCH 10/13] at91: SMC: switch to platfrom_driver   Sascha Hauer
• [PATCH 03/13] at91: factoryse PMC address as it's the same on every soc   Sascha Hauer
• [PATCH 6/7] at91: add bootstrap version   Jan Lübbe
• [help] PHY driver : Unable to find a PHY (unknown ID?)   Mylene Josserand
• [help] PHY driver : Unable to find a PHY (unknown ID?)   Thomas Petazzoni
• [help] PHY driver : Unable to find a PHY (unknown ID?)   Mylene Josserand
• [help] PHY driver : Unable to find a PHY (unknown ID?)   Thomas Petazzoni
• [help] PHY driver : Unable to find a PHY (unknown ID?)   Mylene Josserand
• [PATCH 6/7] at91: add bootstrap version   Sascha Hauer
• [help] PHY driver : Unable to find a PHY (unknown ID?)   Eric Bénard
• [PATCH] ARM omap hsmmc: Fix adding iobase for OMAP3   Juergen Kilb
• [PATCH] ARM omap hsmmc: Fix adding iobase for OMAP3   Sascha Hauer
• [help] PHY driver : Unable to find a PHY (unknown ID?)   Mylene Josserand
• [PATCH] ARM omap hsmmc: Fix adding iobase for OMAP3   Jürgen Kilb
• [PATCH] stringlist: fix cpp macro in header   Steffen Trumtrar
• [PATCH] stringlist: fix cpp macro in header   Sascha Hauer
• GCC question   Franck Jullien
• GCC question   Sascha Hauer
• GCC question   Franck Jullien
• v2013.01.0   Sascha Hauer
• GCC question   Sascha Hauer
• [PATCH] commands: add let command which supports proper arithmetic   Sascha Hauer
• [PATCH] Add devicetree flatten support   Sascha Hauer
• [PATCH 1/2] of: rename of_parse_dtb to of_unflatten_dtb   Sascha Hauer
• [PATCH 2/2] of: Add support for converting the unflattened tree back to a dtb   Sascha Hauer
• [PATCH] ARM omap hsmmc: Fix adding iobase for OMAP3   Sascha Hauer
• [PATCH] Add am33xx/beaglebone network support   Sascha Hauer
• [PATCH 1/4] drivers: net: add driver for TI CPSW   Sascha Hauer
• [PATCH 2/4] ARM am33xx: Add cpws convenience functions   Sascha Hauer
• [PATCH 3/4] ARM beaglebone: Add network support   Sascha Hauer
• [PATCH 4/4] ARM beaglebone: update defconfig for networking   Sascha Hauer
• [PATCH] ARM omap hsmmc: Fix adding iobase for OMAP3   Jürgen Kilb
• ubiformat.c is missing   Jürgen Kilb
• ubiformat.c is missing   Sascha Hauer
• about s3c2442   Juergen Beisert
• about s3c2442   Yi Qingliang
• about s3c2442   Juergen Beisert
• about s3c2442   Juergen Beisert
• about s3c2442   Juergen Beisert
• GCC question   Jean-Christophe PLAGNIOL-VILLARD
• GCC question   Franck Jullien
• about s3c2442   Yi Qingliang
• about s3c2442   Yi Qingliang
• about s3c2442   Yi Qingliang
• about s3c2442   Yi Qingliang
• [PATCH] devicetree improvements   Sascha Hauer
• [PATCH 01/16] of: make of_get_fixed_tree more universally usable   Sascha Hauer
• [PATCH 02/16] of: Fix invalid path for of_find_node_by_path   Sascha Hauer
• [PATCH 03/16] ARM android image: remove double of_fix_tree   Sascha Hauer
• [PATCH 04/16] of: of_free fixes   Sascha Hauer
• [PATCH 05/16] of of_free: remove old node from allnodes list   Sascha Hauer
• [PATCH 06/16] of: return root node when looking for a node with path /   Sascha Hauer
• [PATCH 07/16] of: rename of_parse_dtb to of_unflatten_dtb   Sascha Hauer
• [PATCH 08/16] of: Add support for converting the unflattened tree back to a dtb   Sascha Hauer
• [PATCH 09/16] of: remove unused barebox_fdt   Sascha Hauer
• [PATCH 10/16] ARM bootm: only use concatenated oftree when no other is available   Sascha Hauer
• [PATCH 11/16] of: unflatten: allow overlay dtbs   Sascha Hauer
• [PATCH 12/16] oftree command: refactor   Sascha Hauer
• [PATCH 13/16] of: add of_delete_property   Sascha Hauer
• [PATCH 14/16] of: rename new_device_node to of_new_node and export it   Sascha Hauer
• [PATCH 15/16] commands: Add of_property command   Sascha Hauer
• [PATCH 16/16] commands: Add of_node command   Sascha Hauer
• [PATCH] commands: mtest: add iteration count parameter for mtest command   Marc Reilly
• [PATCH] commands: mtest: add iteration count parameter for mtest command   Alexander Aring
• s3c2440's register: MRSR6   niqingliang2003 at gmail.com
• imx23evk NAND support   Paul B. Henson
• imx23evk NAND support   Paul B. Henson
• imx23evk NAND support   Juergen Beisert
• s3c2440's register: MRSR6   Juergen Beisert
• [PATCH 0/9] reimplement memtest command   Alexander Aring
• [PATCH 1/9] meminfo: fix missing include   Alexander Aring
• [PATCH 2/9] memory: fix size address calculation   Alexander Aring
• [PATCH 3/9] meminfo: fix display of allocated addresses   Alexander Aring
• [PATCH 4/9] arm-mmu: remove semicolon in arm mmu.c   Alexander Aring
• [PATCH 5/9] mmu: make remap_range global accessable   Alexander Aring
• [PATCH 6/9] memory: add function address_in_sdram_regions   Alexander Aring
• [PATCH 7/9] barebox-data: add barebox-data sections   Alexander Aring
• [PATCH 8/9] memtest: remove memtest command   Alexander Aring
• [PATCH 9/9] memtest: add rewritten memtest command   Alexander Aring
• [PATCH] framebuffer work (especially i.MX)   Daniel Mierswa
• [PATCH 1/4] i.MX21: Add periph. clock register name macros   Daniel Mierswa
• [PATCH 2/4] i.MX21/27: don't enable lcd bus clocks too early   Daniel Mierswa
• [PATCH 3/4] i.MX27: fix shift amount for PCCR1_PERCLK3_EN   Daniel Mierswa
• [PATCH 4/4] graphic_utils: always initialize offscreenbuf member   Daniel Mierswa
• [PATCH 7/9] barebox-data: add barebox-data sections   Sascha Hauer
• [PATCH 2/4] i.MX21/27: don't enable lcd bus clocks too early   Sascha Hauer
• [PATCH 7/9] barebox-data: add barebox-data sections   Alexander Aring
• [PATCH 0/9] reimplement memtest command   Sascha Hauer
• [PATCH 4/4] graphic_utils: always initialize offscreenbuf member   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/5] some fixes   Jean-Christophe PLAGNIOL-VILLARD
• [RESEND PATCH 1/5] w1: gpio: use int for gpio   Jean-Christophe PLAGNIOL-VILLARD
• [RESEND PATCH 2/5] at91: sam9x5ek: use -EINVAL for invalid gpio on 1-wire   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/5] at91sam9g45: fix i2c typos   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/5] atmel_spi: fix spi cs gpio request loop   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/5] qt1070: init default key code first   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 0/8] add new memtest command   Alexander Aring
• [PATCH 1/8] remap_range: make function 'remap_range' global   Alexander Aring
• [PATCH 2/8] mmu: add getters for pte cache flags   Alexander Aring
• [PATCH 3/8] arm-mmu: move PAGE_ALIGN macro to common.h   Alexander Aring
• [PATCH 4/8] common: add PAGE_ALIGN_DOWN macro   Alexander Aring
• [PATCH 5/8] memory: add function address_in_sdram_regions   Alexander Aring
• [PATCH 6/8] barebox-data: add barebox-data sections   Alexander Aring
• [PATCH 7/8] memtest: remove memtest command   Alexander Aring
• [PATCH 8/8] memtest: add rewritten memtest command   Alexander Aring
• [PATCH 0/5] some fixes   Sascha Hauer
• imx23evk NAND support   Paul B. Henson
• [PATCH 1/1] defaultenv-2: execute init/* before timeout   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] graphic_utils/fb_open: fix fbsize   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] defaultenv-2: execute init/* before timeout   Sascha Hauer
• [PATCH 1/1] graphic_utils/fb_open: fix fbsize   Sascha Hauer
• [PATCH] mtd-core: fix compiler warning   Alexander Aring
• [PATCH 0/3] improvements in: omap4 OPP, omap4 usb booting and archosg9   Vicente Bergas
• [PATCH 1/3] OMAP4: use OPPs recommended in datasheet   Vicente Bergas
• [PATCH 2/3] OMAP4_USB: more stable communications   Vicente Bergas
• [PATCH 3/3] ARCHOS: use manufacturer values for pad_conf and reorder initialization   Vicente Bergas
• [RESEND PATCH] framebuffer work (especially i.MX)   Daniel Mierswa
• [PATCH 1/4] i.MX21: Add periph. clock register name macros   Daniel Mierswa
• [PATCH 2/4] i.MX21/27: don't enable lcd bus clocks too early   Daniel Mierswa
• [PATCH 3/4] i.MX27: fix shift amount for PCCR1_PERCLK3_EN   Daniel Mierswa
• [PATCH 4/4] video/imx: always initialize offscreenbuf member   Daniel Mierswa
• [PATCH] mtd-core: fix compiler warning   Sascha Hauer
• [PATCH] bootm: move printing of file locations outside verbose mode   Sascha Hauer
• [PATCH 0/7 v2] at91sam9 add watchdog support with keep alive   Fabio Porcedda
• [PATCH] Ka-Ro TX25 updates   Sascha Hauer
• [PATCH 1/4] ARM Ka-Ro TX25: fix running in SDRAM test   Sascha Hauer
• [PATCH 2/4] ARM Ka-Ro TX25: fix compilation with external NAND boot enabled   Sascha Hauer
• [PATCH 3/4] ARM Ka-Ro TX25: Increase NAND partitions   Sascha Hauer
• [PATCH 4/4] ARM Ka-Ro Tx25: Switch to new environment   Sascha Hauer
• [PATCH 8/8] memtest: add rewritten memtest command   Sascha Hauer
• [PATCH 4/4] video/imx: always initialize offscreenbuf member   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/4] video/imx: always initialize offscreenbuf member   Daniel Mierswa
• [PATCH 0/3] improvements in: omap4 OPP, omap4 usb booting and archosg9   Sascha Hauer
• [PATCH 4/4] video/imx: always initialize offscreenbuf member   Sascha Hauer
• What breed of a dog can text you?   PingBrother Networking
• [PATCH] feature_list: a way to pass hardware info to the kernel   Vicente Bergas
• [PATCH] feature_list: a way to pass hardware info to the kernel   Vicente Bergas
• [PATCH 4/4] video/imx: always initialize offscreenbuf member   Daniel Mierswa
• [RESEND PATCH] framebuffer work (especially i.MX)   Sascha Hauer
• [PATCH] ARM: at91: Add Telit EVK-PRO3 board support   Fabio Porcedda
• [PATCH] ARM: at91: Add Telit EVK-PRO3 board support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/7 v2] at91: add bootstrap support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/7] at91: add test commamd to emulate bootrom boot   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/7] at91sam926x: lowlevel add external boot support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/7] at91: sam926x: switch lowlevel param to c code   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/7] at91: usb-a9263 add lowlevel init   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/7] introduce common bootstrap code   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/7] at91: add bootstrap version   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/7] at91: usb_a9263: add bootstrap version   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] defaultenv-2: move ps1 to base/init/ps1   Jean-Christophe PLAGNIOL-VILLARD
• [For master PATCH 1/1] Makefile: move cmd_check_file_size to Makefile.lib   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/7 v3] at91: add bootstrap support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/7] at91: usb_a9263: add bootstrap version   Sascha Hauer
• [PATCH 5/7] introduce common bootstrap code   Sascha Hauer
• [PATCH 7/7] at91: usb_a9263: add bootstrap version   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/7] introduce common bootstrap code   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/7] at91: add test commamd to emulate bootrom boot   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/7] at91sam926x: lowlevel add external boot support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/7] at91: sam926x: switch lowlevel param to c code   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/7] at91: usb-a9263 add lowlevel init   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/7] introduce common bootstrap code   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/7] at91: add bootstrap version   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/7] at91: usb_a9263: add bootstrap version   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/7] introduce common bootstrap code   Sascha Hauer
• [PATCH 6/7] at91: add bootstrap version   Sascha Hauer
• [PATCH 7/7] at91: usb_a9263: add bootstrap version   Sascha Hauer
• [PATCH 1/7] at91: add test commamd to emulate bootrom boot   Sascha Hauer
• [PATCH 1/7] at91: add test commamd to emulate bootrom boot   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/7] at91: usb_a9263: add bootstrap version   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/7] introduce common bootstrap code   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/7] at91: add test commamd to emulate bootrom boot   Sascha Hauer
• [PATCH 7/7] at91: usb_a9263: add bootstrap version   Sascha Hauer
• [PATCH] feature_list: a way to pass hardware info to the kernel   Sascha Hauer
• [PATCH 7/7] at91: usb_a9263: add bootstrap version   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/7] at91: add test commamd to emulate bootrom boot   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/9 v4] at91: add bootstrap support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/9] filetype: add is_barebox_mips_head support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/9] filetype: add is_barebox_head   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/9] at91: add test commamd to emulate bootrom boot   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/9] at91sam926x: lowlevel add external boot support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/9] at91: sam926x: switch lowlevel param to c code   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/9] at91: usb-a9263 add lowlevel init   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/9] introduce common bootstrap code   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 8/9] at91: add bootstrap version   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 9/9] at91: usb_a9263: add bootstrap version   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] feature_list: a way to pass hardware info to the kernel   Vicente Bergas
• [PATCH 2/9] filetype: add is_barebox_head   Alexander Aring
• [PATCH 2/9] filetype: add is_barebox_head   Antony Pavlov
• [PATCH 1/7] at91: add test commamd to emulate bootrom boot   Sascha Hauer
• [PATCH] MMC/SD improvements   Sascha Hauer
• [PATCH 1/5] mci: return 0 for probe parameter even when already initialized   Sascha Hauer
• [PATCH 2/5] mci: Always add probe parameter for cards   Sascha Hauer
• [PATCH 3/5] mci: Add card_present callback   Sascha Hauer
• [PATCH 4/5] mci i.MX esdhc: implement card_present callback   Sascha Hauer
• [PATCH 5/5] mci atmel: implement card_present callback   Sascha Hauer
• [PATCH] i.MX6 USB phy support   Sascha Hauer
• [PATCH 1/5] ARM i.MX6 USB phy: Fix phy function names   Sascha Hauer
• [PATCH 2/5] ARM i.MX6: Fix usb phy base addresses   Sascha Hauer
• [PATCH 3/5] ARM i.MX6: Add usbphy clocks   Sascha Hauer
• [PATCH 4/5] USB: Add usb phy driver for i.MX   Sascha Hauer
• [PATCH 5/5] ARM i.MX6: Add Chipidea support   Sascha Hauer
• [PATCH] mtd m25p80: Add support for w25q80bl   Sascha Hauer
• [PATCH] ARM: Add errata support   Sascha Hauer
• [For master PATCH 1/1] Makefile: move cmd_check_file_size to Makefile.lib   Sascha Hauer
• [PATCH] w1: add ds28ec20 eeprom support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] startup related cleanups   Sascha Hauer
• [PATCH 01/10] startup: call a barebox_main function pointer at the end of the startup   Sascha Hauer
• [PATCH 02/10] move struct action_data to the only file using it   Sascha Hauer
• [PATCH 03/10] make file_*_action static   Sascha Hauer
• [PATCH 04/10] move prototypes for envfs_* to envfs.h   Sascha Hauer
• [PATCH 05/10] scripts: remove now unnecessary include   Sascha Hauer
• [PATCH 06/10] startup: use IS_ENABLED instead of ifdef   Sascha Hauer
• [PATCH 07/10] startup: Use IS_ENABLED for loading environment   Sascha Hauer
• [PATCH 08/10] startup: add __noreturn to start_barebox   Sascha Hauer
• [PATCH 09/10] defaultenv loading: rework to use less ifdefs/defines   Sascha Hauer
• [PATCH 10/10] filetype: Make buf in file_detect_type const   Sascha Hauer
• [PATCH 0/9 v4] at91: add bootstrap support   Sascha Hauer
• [PATCH] simplify i.MX external NAND boot for boards   Sascha Hauer
• [PATCH 1/2] ARM i.MX: Add a common NAND entry for external boot mode   Sascha Hauer
• [PATCH 2/2] ARM i.MX boards: use helper function for external NAND boot   Sascha Hauer
• [PATCH] tftp: reset timer on progress   Sascha Hauer
• [PATCH 1/1] defaultenv-2: move ps1 to base/init/ps1   Sascha Hauer
• [PATCH] w1: add ds28ec20 eeprom support   Sascha Hauer
• [PATCH 0/9 v4] at91: add bootstrap support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 00/10 v5] at91: add bootstrap support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 01/10] filetype: add is_barebox_mips_head support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 02/10] filetype: add is_barebox_head   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 03/10] at91: dump mux command: make it depends on COMMAND_SUPPORT   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 04/10] at91: add test commamd to emulate bootrom boot   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 05/10] at91sam926x: lowlevel add external boot support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 06/10] at91: sam926x: switch lowlevel param to c code   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 07/10] at91: usb-a9263 add lowlevel init   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 08/10] introduce common bootstrap code   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 09/10] at91: add bootstrap version   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 10/10] at91: usb_a9263: add bootstrap version   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 08/10] introduce common bootstrap code   Alexander Aring
• [PATCH 04/10] at91: add test commamd to emulate bootrom boot   Alexander Aring
• [PATCH v2] ARM: at91: Add Telit EVK-PRO3 board support   Fabio Porcedda
• [PATCH] ARM: at91: Add Telit EVK-PRO3 board support   Fabio Porcedda
• [PATCH 08/10] introduce common bootstrap code   Sascha Hauer
• [PATCH 08/10] introduce common bootstrap code   Alexander Aring
• [PATCH v2] ARM: at91: Add Telit EVK-PRO3 board support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 08/10] introduce common bootstrap code   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 08/10] introduce common bootstrap code   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 00/10 v6] at91: add bootstrap support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 01/10] filetype: add is_barebox_mips_head support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 02/10] filetype: add is_barebox_head   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 03/10] at91: dump mux command: make it depends on COMMAND_SUPPORT   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 04/10] at91: add test commamd to emulate bootrom boot   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 05/10] at91sam926x: lowlevel add external boot support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 06/10] at91: sam926x: switch lowlevel param to c code   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 07/10] at91: usb-a9263 add lowlevel init   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 08/10] introduce common bootstrap code   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 09/10] at91: add bootstrap version   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 10/10] at91: usb_a9263: add bootstrap version   Jean-Christophe PLAGNIOL-VILLARD
• [RFC PATCH 1/1] omap: xload: switch to generic bootstrap   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] introduce console none support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] introduce console none support   Sascha Hauer
• [PATCH 0/9] atmel: add ehci support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/9] usb: add parameters info on usb device   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/9] usb: fix for USB_ST_STALLED status reporting in ehci_submit_async()   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/9] ehci: if caps ressource is not provided discover it via cr_capbase   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/9] ehci: add atmel support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/9] at91: usb: allow to specicfy inverted vbus   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/9] at91sam9g45: add ehci support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/9] at91sam9m10g45ek: add usb support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 8/9] at91sam9x5: add ehci support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 9/9] at91sam9x5ek: add usb support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 06/10] at91: sam926x: switch lowlevel param to c code   Sascha Hauer
• [PATCH 04/10] at91: add test commamd to emulate bootrom boot   Sascha Hauer
• [PATCH 7/9] at91sam9m10g45ek: add usb support   Sascha Hauer
• Memory size issue   Alexander Shiyan
• Memory size issue   Jan Lübbe
• Re[2]: Memory size issue   Alexander Shiyan
• [PATCH 1/5] ARM: ccmx51: Remove SDRAM size settings   Alexander Shiyan
• [PATCH 2/5] ARM: ccmx51: Fix ethernet devices control by MC13892 GPOs   Alexander Shiyan
• [PATCH 3/5] ARM: ccmx51: Set MAC address before FEC device registration   Alexander Shiyan
• [PATCH 4/5] ARM: ccmx51js: Define reset pin for USB Host1   Alexander Shiyan
• [PATCH 5/5] ARM: ccmx51: Update defconfig   Alexander Shiyan
• PingBrother news - may the Firmware be with you   PingBrother Networking
• [PATCH 7/9] at91sam9m10g45ek: add usb support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/9] at91sam9m10g45ek: add usb support   Sascha Hauer
• [RFC PATCH 1/1] omap: xload: switch to generic bootstrap   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 00/10 v7] at91: add bootstrap support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 01/10] filetype: add is_barebox_mips_head support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 02/10] filetype: add is_barebox_head   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 03/10] at91: dump mux command: make it depends on COMMAND_SUPPORT   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 04/10] at91: add test commamd to emulate bootrom boot   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 05/10] at91sam926x: lowlevel add external boot support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 06/10] at91: sam926x: switch lowlevel param to c code   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 07/10] at91: usb-a9263 add lowlevel init   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 08/10] introduce common bootstrap code   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 09/10] at91: add bootstrap version   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 10/10] at91: usb_a9263: add bootstrap version   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/2] ohci: fixes   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/9] at91sam9m10g45ek: add usb support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] ohci: make it depends on !MMU   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] ohci: only enable drivers if ohci is enabled   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 00/10 v7] at91: add bootstrap support   Sascha Hauer
• [PATCH 1/5] ARM: ccmx51: Remove SDRAM size settings   Sascha Hauer
• [PATCH 0/2] console none support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM v7: Fix register corruption in v7_mmu_cache_off   Sascha Hauer
• [PATCH 1/2] console: switch select to choice   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] introduce console none support   Jean-Christophe PLAGNIOL-VILLARD
• AT91SAM9260EK DFU - Error using dfu-util   Fabio Porcedda
• AT91SAM9260EK DFU - Error using dfu-util   Eric Bénard
• AT91SAM9260EK DFU - Error using dfu-util   Fabio Porcedda
• [PATCH 0/9] atmel: add ehci support   Sascha Hauer
• [PATCH 0/2] ohci: fixes   Sascha Hauer
• [PATCH 8/8] memtest: add rewritten memtest command   Alexander Aring
• [PATCH 8/8] memtest: add rewritten memtest command   Sascha Hauer
• [PATCH 8/8] memtest: add rewritten memtest command   Alexander Aring
• [PATCH 8/8] memtest: add rewritten memtest command   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/2] console none support   Sascha Hauer
• [PATCH 0/2] console none support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 8/8] memtest: add rewritten memtest command   Alexander Aring
• [PATCH 0/2] tny-a9263: add spi + bootstrap support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/2] console none support   Sascha Hauer
• [PATCH] feature_list: a way to pass hardware info to the kernel   Sascha Hauer
• [PATCH 1/2] tny-a9263: add dataflash support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] tny_a9263: add bootstrap support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 8/8] memtest: add rewritten memtest command   Sascha Hauer
• [PATCH] feature_list: a way to pass hardware info to the kernel   vj
• [PATCH 0/2] at91: add atmel at91sam9m10ihd tabel support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] at91sam9m10g45ek/defconfig: set board type   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] at91: add at91sam9m10ihd tablet support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/2] at91: bootstrap: add menu support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] menu: the dependancy on process escape is wrong drop it   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] at91: bootstrap: add menu support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2] ARM: at91: Add Telit EVK-PRO3 board support   Fabio Porcedda
• [PATCH v3] ARM: at91: Add Telit EVK-PRO3 board support   Fabio Porcedda
• [PATCH v2] ARM: at91: Add Telit EVK-PRO3 board support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3] ARM: at91: Add Telit EVK-PRO3 board support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3] ARM: at91: Add Telit EVK-PRO3 board support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM OMAP: use SZ_*M constants in RAM device register functions   Antony Pavlov
• [PATCH 0/2] at91: add Somfy Animeo-IP support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] at91sam9260ek: specify mach entry   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] at91: add Somfy Animeo IP support   Jean-Christophe PLAGNIOL-VILLARD
• [For-next PATCH 0/2 v2] at91: add Somfy Animeo-IP support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] at91sam9260ek: specify mach entry   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] at91: add Somfy Animeo IP support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] arm-mmu: switch pte flags vars to lower case   Alexander Aring
• [PATCH] defenv-2: migrate guf-vincell to config-board   Michael Olbrich
• [PATCH] defenv-2: source /env/config after /env/init/*   Michael Olbrich
• [PATCH v3] ARM: at91: Add Telit EVK-PRO3 board support   Fabio Porcedda
• [PATCH v3] ARM: at91: Add Telit EVK-PRO3 board support   Fabio Porcedda
• [PATCH] of: Fix of_find_node_by_path breakage   Alexander Shiyan
• [PATCH v3] ARM: at91: Add Telit EVK-PRO3 board support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3] ARM: at91: Add Telit EVK-PRO3 board support   Fabio Porcedda
• [PATCH v4] ARM: at91: Add Telit EVK-PRO3 board support   Fabio Porcedda
• [PATCH v4] ARM: at91: Add Telit EVK-PRO3 board support   Jean-Christophe PLAGNIOL-VILLARD
• [for master PATCH 00/14] atmel_mci: fixes and cleanup   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 01/14] atmel_mci: rename atmel_mci_host tp atmel_mci   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 02/14] atmel_mci: rename atmel_mci_readl/writel to atmci_readl/writel   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 03/14] atmel_mci: rename all function to start with atmci   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 04/14] atmel_mci: use linux regs define   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 05/14] atmel_mci: detect IP version   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 06/14] atmel_mci: version 0x5xx of the IP have a different clk div   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 07/14] atmel_mci: fix host init   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 08/14] atmel_mci: rwproof is only needed since IP version 0x200   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 09/14] atmel_mci: on version 0x0 we need to reset the IP at each request   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 10/14] atmel_mci: after a software timeout the IP need to be reset   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 11/14] atmel_mci: support the SD highspeed since IP version 0x300   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 12/14] atmel_mci: update the SD/SDIO Card Register at request time   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 13/14] atmel_mci: drop board host caps   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 14/14] atmel_mci: gpio: request and configure card detect   Jean-Christophe PLAGNIOL-VILLARD
• [for next PATCH 0/2] MMC: introduce write protect support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] mci: add card_write_protected   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] atmel_mci: add write protect detection support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 08/14] atmel_mci: rwproof is only needed since IP version 0x200   Sascha Hauer
• [PATCH 08/14] atmel_mci: rwproof is only needed since IP version 0x200   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/2] tny-a9263: add spi + bootstrap support   Sascha Hauer
• [PATCH 0/2] at91: add atmel at91sam9m10ihd tabel support   Sascha Hauer
• [PATCH] defenv-2: source /env/config after /env/init/*   Sascha Hauer
• [PATCH] of: Fix of_find_node_by_path breakage   Sascha Hauer
• [PATCH] ARM AT91 mmccpu: Fix non existing define   Sascha Hauer
• [PATCH] arm-mmu: switch pte flags vars to lower case   Sascha Hauer
• [PATCH 0/7] globalvar: add multiple device support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/7] params: allow to access first sub-device and params via env   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/7] globalvar: add it's own bus   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/7] globalvar: allow to register multiple device   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/7] net: switch to global device   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/7] dhcp: switch globalvar to it's own device   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/7] bootm: switch globalvar to it's own device   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/7] bootargs: switch globalvar to it's own device   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] Animeo IP: use gpiolib ip to detect the hw version   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/7] params: allow to access first sub-device and params via env   Alexander Aring
• [PATCH] spi: fix compiler warning   Antony Pavlov
• [PATCH] fix build warnings   Sascha Hauer
• [PATCH 1/3] ARM bcm2835: Fix noreturn function does return   Sascha Hauer
• [PATCH 2/3] ARM: Fix reassigning symbols in defconfigs   Sascha Hauer
• [PATCH 3/3] pbl string: Fix no previous prototype warnings   Sascha Hauer
• [PATCH] ARM AT91 pm9263: Fix phy address   Sascha Hauer
• [PATCH 1/1] gpio_keys: fix loop on buttons for request and configuration   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/4] MIPS: introduce ram0 regions register function   Antony Pavlov
• [PATCH 1/4] MIPS: introduce ram0 regions register function   Antony Pavlov
• [PATCH 2/4] MIPS: qemu-malta: use mips_add_ram0()   Antony Pavlov
• [PATCH 3/4] MIPS: rzx50: use mips_add_ram0()   Antony Pavlov
• [PATCH 4/4] MIPS: dlink-dir-320: use mips_add_ram0()   Antony Pavlov
• [PATCH 1/1] at91sam9261: fix max bare_init it's 156KiB   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/5] at91sam9261: add bootstrap and firstage support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/5] at91sam9260/9g20/9261/9g10/9263: split soc lowlevel_init from generic   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/5] at91: introduce AT91_LOAD_BAREBOX_SRAM to specifcy which size load for external boot   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/5] at91sam9261ek: add spi support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/5] at91sam9261ek: add boostrap support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/5] at91sam9261ek: add first stage support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/5] at91sam9261ek: add first stage support   Sascha Hauer
• [PATCH] spi: fix compiler warning   Sascha Hauer
• [PATCH 1/1] gpio_keys: fix loop on buttons for request and configuration   Sascha Hauer
• [PATCH 5/5] at91sam9261ek: add first stage support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/7] globalvar: add multiple device support   Sascha Hauer
• [PATCH 0/7] globalvar: add multiple device support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] Add new ARM entry point for barebox   Sascha Hauer
• [PATCH 01/34] ARM: Add new entry point for barebox   Sascha Hauer
• [PATCH 02/34] ARM: add __noreturn to board_init_lowlevel_return   Sascha Hauer
• [PATCH 03/34] ARM i.MX: Use SRAM stack in lowlevel code   Sascha Hauer
• [PATCH 04/34] ARM i.MX: Add i.MX specific entry point for barebox   Sascha Hauer
• [PATCH 05/34] ARM i.MX: prepare external nand boot for SoC specific entry   Sascha Hauer
• [PATCH 06/34] ARM i.MX boards: switch to barebox_arm_entry   Sascha Hauer
• [PATCH 07/34] ARM MXS boards: switch to barebox_arm_entry   Sascha Hauer
• [PATCH 08/34] ARM OMAP boards: switch to barebox_arm_entry   Sascha Hauer
• [PATCH 09/34] ARM Samsung boards: switch to barebox_arm_entry   Sascha Hauer
• [PATCH 10/34] ARM PXA boards: switch to barebox_arm_entry   Sascha Hauer
• [PATCH 11/34] ARM ep93xx boards: switch to barebox_arm_entry   Sascha Hauer
• [PATCH 12/34] ARM tegra boards: switch to barebox_arm_entry   Sascha Hauer
• [PATCH 13/34] ARM nomadik boards: switch to barebox_arm_entry   Sascha Hauer
• [PATCH 14/34] ARM versatile boards: switch to barebox_arm_entry   Sascha Hauer
• [PATCH 15/34] ARM netx boards: switch to barebox_arm_entry   Sascha Hauer
• [PATCH 16/34] ARM clep7212: switch to barebox_arm_entry   Sascha Hauer
• [PATCH 17/34] ARM raspberrypi: switch to barebox_arm_entry   Sascha Hauer
• [PATCH 18/34] ARM AT91 mmccpu: Fix non existing define   Sascha Hauer
• [PATCH 19/34] ARM AT91: switch to barebox_arm_entry part1   Sascha Hauer
• [PATCH 20/34] ARM AT91: switch at91rm9200 board to barebox_arm_entry   Sascha Hauer
• [PATCH 21/34] ARM AT91: switch remaining boards to barebox_arm_entry   Sascha Hauer
• [PATCH 22/34] ARM: remove now unused MACH_[HAS|DO]_LOWLEVEL_INIT   Sascha Hauer
• [PATCH 23/34] ARM start-pbl: make board_init_lowlevel_return static   Sascha Hauer
• [PATCH 24/34] ARM start-pbl: call uncompressed binary with arguments   Sascha Hauer
• [PATCH 25/34] ARM start: pickup parameters from pbl   Sascha Hauer
• [PATCH 26/34] ARM: Setup stack at end of SDRAM   Sascha Hauer
• [PATCH 27/34] ARM pbl: Use dynamic parameters for early malloc space   Sascha Hauer
• [PATCH 28/34] ARM mmu: pickup already enabled mmu   Sascha Hauer
• [PATCH 29/34] ARM: Factor out early mmu code   Sascha Hauer
• [PATCH 30/34] ARM: Enable mmu early   Sascha Hauer
• [PATCH 31/34] ARM: Automatically determine malloc size   Sascha Hauer
• [PATCH 32/34] generic memory layout: fix deps for [MALLOC|STACK]_BASE   Sascha Hauer
• [PATCH 33/34] ARM: disable HAVE_CONFIGURABLE_MEMORY_LAYOUT   Sascha Hauer
• [PATCH 34/34] ARM pbl: inline decompress function   Sascha Hauer
• [PATCH 19/34] ARM AT91: switch to barebox_arm_entry part1   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/7] globalvar: add multiple device support   Sascha Hauer
• [For-nex PATCH 0/8 v2] at91: add atmel lcdc framebuffer support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 19/34] ARM AT91: switch to barebox_arm_entry part1   Sascha Hauer
• [PATCH 1/1] Animeo IP: use gpiolib ip to detect the hw version   Sascha Hauer
• [PATCH 1/1] at91sam9261: fix max bare_init it's 156KiB   Sascha Hauer
• [PATCH 1/8] video: add atmel lcdc frambuffer support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/8] at91sam9263: add atmel lcdc frambuffer support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/8] at91sam9261: add atmel lcdc frambuffer support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/8] at91sam9g45: add atmel lcdc frambuffer support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/8] at91sam9m10g45ek: add lcdc support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/8] at91sam9m10ihd: add lcd support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/8] at91sam9261ek: add lcd support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 8/8] at91sam9263ek: add lcd support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/4] MIPS: introduce ram0 regions register function   Sascha Hauer
• [PATCH 2/2] at91: bootstrap: add menu support   Sascha Hauer
• [PATCH 2/2] at91: bootstrap: add menu support   Sascha Hauer
• [For-master PATCH 1/2] at91sam9n12: fix wp_pin invalid value   Jean-Christophe PLAGNIOL-VILLARD
• [For-master PATCH 2/2] at91sam9x5ek: fix wp_pin and detect_pin pin invalid value   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 29/34] ARM: Factor out early mmu code   Alexander Aring
• [PATCH 21/34] ARM AT91: switch remaining boards to barebox_arm_entry   Jean-Christophe PLAGNIOL-VILLARD
• Re: [PATCH 16/34] ARM clep7212: switch to barebox_arm_entry   Alexander Shiyan
• [PATCH 0/4] at91: sam9gx5/9g45/9n12 sd/ddrram autodetect size   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/4] at91sam9x5: add autodetect sd/ddram size   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/4] at91sam9n12: add autodetect sd/ddram size   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/4] at91sam9g45: add autodetect sd/ddram size   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/4] at91: Atmel ref board sam{9x5/9n12/m109g45} EK and Ronetix pm9g45 autodetect ddr size   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] at91rm9200: fix default TEXT_BASE to 15MiB   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] at91rm9200ek: fix mem size   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/2] at91rm9200: sdram autodetect size   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] at91rm9200: add autodetect sdram size   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] at91rm9200ek: auto detect sdram size   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/4] MIPS: introduce ram0 regions register function   Sascha Hauer
• [For-master PATCH 1/2] at91sam9n12: fix wp_pin invalid value   Sascha Hauer
• [PATCH 0/4] at91: sam9gx5/9g45/9n12 sd/ddrram autodetect size   Sascha Hauer
• [PATCH 1/2] at91rm9200: fix default TEXT_BASE to 15MiB   Sascha Hauer
• [PATCH 0/2] at91rm9200: sdram autodetect size   Sascha Hauer
• [For-nex PATCH 0/8 v2] at91: add atmel lcdc framebuffer support   Sascha Hauer
• [PATCH 29/34] ARM: Factor out early mmu code   Sascha Hauer
• [PATCH 16/34] ARM clep7212: switch to barebox_arm_entry   Sascha Hauer
• [PATCH 1/2] at91rm9200: fix default TEXT_BASE to 15MiB   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] at91rm9200: fix default TEXT_BASE to 15MiB   Sascha Hauer
• [PATCH 6/8] at91sam9m10ihd: add lcd support   Sascha Hauer
• Fwd: [PATCH 1/4] MIPS: introduce ram0 regions register function   Antony Pavlov
• [PATCH 0/3] pbl: factorise decompress code and add none compress support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/3] pbl: move configs to pbl/Kconfig   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3] pbl: factorise decompressor   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3] pbl: add none compression support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: efika-mx-smartbook: clean up whitespaces   Antony Pavlov
• [PATCH 6/8] at91sam9m10ihd: add lcd support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM OMAP: use SZ_*M constants in RAM device register functions   Antony Pavlov
• [PATCH 1/1] at91sam9m10ihd: set missing lcd power control   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] at91: add clock dump command   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] w1: add dual search support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/2] macb: sync with linux and prepare for gmac support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] macb: sync register access and clock with the kernel   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] macb: allow to pass the phy interface   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/2] at91: add sama5d3 support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] at91: add sama5d3 support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] at91: add sama5d3xek board support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] introduce compiletime loglevel   Sascha Hauer
• [PATCH 01/12] consolidate print* in a single header   Sascha Hauer
• [PATCH 02/12] mtd m25p80: consistenly switch to dev_* messages   Sascha Hauer
• [PATCH 03/12] treewide: fix format specifiers   Sascha Hauer
• [PATCH 04/12] nios2: Let readl return an unsigned int   Sascha Hauer
• [PATCH 05/12] nios2: Use unsigned long for __kernel_size_t   Sascha Hauer
• [PATCH 06/12] blackfin: Use unsigned long for __kernel_size_t   Sascha Hauer
• [PATCH 07/12] USB ehci: Use dev_* for messages   Sascha Hauer
• [PATCH 08/12] introduce compile time loglevel   Sascha Hauer
• [PATCH 09/12] introduce pr_fmt   Sascha Hauer
• [PATCH 10/12] ARM mmu: Use pr_debug   Sascha Hauer
• [PATCH 11/12] ARM pcm038: Specify pr_fmt and change messages to pr_*   Sascha Hauer
• [PATCH 12/12] mtd nand: Specify pr_fmt and change messages to pr_*   Sascha Hauer
• [PATCH] ARM OMAP: move lowlevel board code to lowlevel.c   Sascha Hauer
• [PATCH 1/6] ARM omap3 beagle: move lowlevel code to lowlevel.c   Sascha Hauer
• [PATCH 2/6] ARM omap3 phycard-a-l1: move lowlevel code to lowlevel.c   Sascha Hauer
• [PATCH 3/6] ARM omap3 omap343xdsp: move lowlevel code to lowlevel.c   Sascha Hauer
• [PATCH 4/6] ARM omap3 omap3evm: move lowlevel code to lowlevel.c   Sascha Hauer
• [PATCH 5/6] ARM am33xx beaglebone: move lowlevel code to lowlevel.c   Sascha Hauer
• [PATCH 6/6] ARM omap3 beagle: Compile xload defconfig in Thumb2 mode   Sascha Hauer
• [PATCH 1/1] w1: add dual search support   Sascha Hauer
• [PATCH 0/2] macb: sync with linux and prepare for gmac support   Sascha Hauer
• [PATCH 1/1] at91sam9m10ihd: set missing lcd power control   Sascha Hauer
• [PATCH] ARM: efika-mx-smartbook: clean up whitespaces   Sascha Hauer
• [PATCH 2/2] at91: add sama5d3xek board support   Eric Bénard
• [PATCH 1/2] nand_write: initialize OOB buffer for each page   Jan Luebbe
• [PATCH 2/2] nand_omap_gpmc: use 0x00 for ECC padding in BCH ROM mode   Jan Luebbe
• [PATCH] commands: reset: add shutdown_barebox() before reset_cpu()   Antony Pavlov
• [PATCH 0/2] at91: add sama5d3 support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v5] ARM: at91: Add Telit EVK-PRO3 board support   Fabio Porcedda
• [PATCH 0/2 v2] at91: add sama5d3 support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] at91: add sama5d3 support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] at91: add sama5d3xek board support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/2 v2] at91: add sama5d3 support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2 v3] at91: add sama5d3 support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2 v3] at91: add sama5d3xek board support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2] pcm049: clean up defconfig   Jan Weitzel
• smooth BrOperator   PingBrother Networking
• [PATCH 0/2 v2] at91: add sama5d3 support   Sascha Hauer
• smooth BrOperator   PingBrother Networking
• [PATCH] ARM OMAP: use SZ_*M constants in RAM device register functions   Sascha Hauer
• [PATCH] commands: reset: add shutdown_barebox() before reset_cpu()   Sascha Hauer
• [PATCH 0/3] pbl: factorise decompress code and add none compress support   Sascha Hauer
• [PATCH v2] pcm049: clean up defconfig   Sascha Hauer
• [PATCH 1/2] nand_write: initialize OOB buffer for each page   Sascha Hauer
• [PATCH 2/2] nand_omap_gpmc: use 0x00 for ECC padding in BCH ROM mode   Sascha Hauer
• [PATCH v5] ARM: at91: Add Telit EVK-PRO3 board support   Sascha Hauer
• [RFC PATCH 1/1] omap: xload: switch to generic bootstrap   Sascha Hauer
• current master pandaboard booting broken   Belisko Marek
• [PATCH 0/6] atmel: add Atmel HLCDC support and boards   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/6] atmel_lcdfb: factorise common code between lcdc and new hlcdc IP   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/6] video: add Atmel HLCD support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/6] at91sam9x5: add lcd support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/6] at91sam9x5ek: add lcd support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/6] sama5d3: add lcd support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/6] sama5d3xek: add lcd support   Jean-Christophe PLAGNIOL-VILLARD
• current master pandaboard booting broken   Sascha Hauer
• [PATCH v2] nand_write: initialize OOB buffer for each page   Jan Luebbe
• [PATCH 0/3] at91sam9260/9g20ek: some cleanup   Fabio Porcedda
• [PATCH 1/3] at91sam9260/9g20ek: cleanup coding style   Fabio Porcedda
• [PATCH 2/3] at91sam9260/9g20ek: move sam9_smc_config modification inside definition   Fabio Porcedda
• [PATCH 3/3] at91sam9260/9g20ek: enable clock via clock framework   Fabio Porcedda
• [PATCH 2/3] at91sam9260/9g20ek: move sam9_smc_config modification inside definition   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/3] at91sam9260/9g20ek: cleanup coding style   Jean-Christophe PLAGNIOL-VILLARD
• [For-next PATCH 0/6] atmel: add Atmel HLCDC support and boards   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/8] atmel_lcdfb: factorise common code between lcdc and new hlcdc IP   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/8] video: add Atmel HLCD support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/8] at91sam9x5: add lcd support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/8] at91sam9x5ek: add lcd support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/8] at91sam9n12: add lcd support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/8] at91sam9n12ek: add lcd support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/8] sama5d3: add lcd support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 8/8] sama5d3xek: add lcd support   Jean-Christophe PLAGNIOL-VILLARD
• [RFC PATCH 1/1] omap: xload: switch to generic bootstrap   Jean-Christophe PLAGNIOL-VILLARD
• [RFC PATCH 1/1] omap: xload: switch to generic bootstrap   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/2] at91: bootstrap: add menu support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/5] at91sam9261ek: add first stage support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/5] at91sam9261: add bootstrap and firstage support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] omap3: fix debug_ll uart base   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] beagle: add nand partition and boot   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/4] gpiolib: add gpio_request_{in,out}put support   Antony Pavlov
• [PATCH 1/4] gpiolib: fix whitespaces   Antony Pavlov
• [PATCH 2/4] gpiolib: add gpio_request_{in,out}put support   Antony Pavlov
• [PATCH 3/4] at91sam9*: use gpio_request_output()   Antony Pavlov
• [PATCH 4/4] animeo_ip: use gpio_request_input()   Antony Pavlov
• [PATCH 3/4] at91sam9*: use gpio_request_output()   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 0/5] gpiolib: add gpio_request_{in,out}put support   Antony Pavlov
• [PATCH v2 1/5] gpiolib: fix whitespaces   Antony Pavlov
• [PATCH v2 2/5] gpiolib: add gpio_request_{in,out}put support   Antony Pavlov
• [PATCH v2 3/5] gpiolib: gpio_request(): add error message   Antony Pavlov
• [PATCH v2 4/5] at91sam9*: use gpio_request_output()   Antony Pavlov
• [PATCH v2 5/5] animeo_ip: use gpio_request_input()   Antony Pavlov

Last message date: Thu Jan 31 16:46:36 EST 2013
Archived on: Thu Jan 31 16:34:43 EST 2013

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...