[PATCH 2/2] tny_a9263: add bootstrap support
Jean-Christophe PLAGNIOL-VILLARD
plagnioj at jcrosoft.com
Wed Jan 23 15:52:12 EST 2013
the lowlevel init is the same as the usb-a9263 except that can not have the
128MiB option
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
---
arch/arm/boards/tny-a926x/Makefile | 9 ++
arch/arm/boards/tny-a926x/tny_a9263_bootstrap.c | 16 +++
.../arm/boards/tny-a926x/tny_a9263_lowlevel_init.c | 107 ++++++++++++++++++++
arch/arm/configs/tny_a9263_bootstrap_defconfig | 26 +++++
arch/arm/mach-at91/Kconfig | 1 +
5 files changed, 159 insertions(+)
create mode 100644 arch/arm/boards/tny-a926x/tny_a9263_bootstrap.c
create mode 100644 arch/arm/boards/tny-a926x/tny_a9263_lowlevel_init.c
create mode 100644 arch/arm/configs/tny_a9263_bootstrap_defconfig
diff --git a/arch/arm/boards/tny-a926x/Makefile b/arch/arm/boards/tny-a926x/Makefile
index eb072c0..36ea09f 100644
--- a/arch/arm/boards/tny-a926x/Makefile
+++ b/arch/arm/boards/tny-a926x/Makefile
@@ -1 +1,10 @@
obj-y += init.o
+
+bootstrap-$(CONFIG_MACH_TNY_A9263) = tny_a9263_bootstrap.o
+obj-$(CONFIG_AT91_BOOTSTRAP) += $(bootstrap-y)
+
+lowlevel_init-$(CONFIG_MACH_TNY_A9263) = tny_a9263_lowlevel_init.o
+
+obj-$(CONFIG_MACH_DO_LOWLEVEL_INIT) += $(lowlevel_init-y)
+
+pbl-$(CONFIG_MACH_DO_LOWLEVEL_INIT) += $(lowlevel_init-y)
diff --git a/arch/arm/boards/tny-a926x/tny_a9263_bootstrap.c b/arch/arm/boards/tny-a926x/tny_a9263_bootstrap.c
new file mode 100644
index 0000000..368c677
--- /dev/null
+++ b/arch/arm/boards/tny-a926x/tny_a9263_bootstrap.c
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnio at jcrosoft.com>
+ *
+ * Under GPLv2
+ */
+
+#include <common.h>
+#include <bootstrap.h>
+#include <mach/bootstrap.h>
+
+#ifdef CONFIG_MTD_DATAFLASH
+void * bootstrap_board_read_dataflash(void)
+{
+ return bootstrap_read_devfs("dataflash0", false, 0xffc0, 204864, 204864);
+}
+#endif
diff --git a/arch/arm/boards/tny-a926x/tny_a9263_lowlevel_init.c b/arch/arm/boards/tny-a926x/tny_a9263_lowlevel_init.c
new file mode 100644
index 0000000..1b146da
--- /dev/null
+++ b/arch/arm/boards/tny-a926x/tny_a9263_lowlevel_init.c
@@ -0,0 +1,107 @@
+/*
+ * Copyright (C) 2009-2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
+ *
+ * Under GPLv2
+ */
+
+#include <common.h>
+#include <init.h>
+#include <mach/hardware.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_wdt.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91sam9_smc.h>
+#include <mach/at91sam9_sdramc.h>
+#include <mach/at91sam9_matrix.h>
+#include <mach/at91_lowlevel_init.h>
+
+#define MASTER_CLOCK 180
+
+#if MASTER_CLOCK == 200
+#define MASTER_PLL_MUL 100
+#else
+#define MASTER_PLL_MUL 90
+#endif
+#define MASTER_PLL_DIV 6
+
+void __bare_init at91sam926x_lowlevel_board_config(struct at91sam926x_lowlevel_cfg *cfg)
+{
+ /* Disable Watchdog */
+ cfg->wdt_mr =
+ AT91_WDT_WDIDLEHLT | AT91_WDT_WDDBGHLT |
+ AT91_WDT_WDV |
+ AT91_WDT_WDDIS |
+ AT91_WDT_WDD;
+
+ /* define PDC[31:16] as DATA[31:16] */
+ cfg->ebi_pio_pdr = 0xFFFF0000;
+ /* no pull-up for D[31:16] */
+ cfg->ebi_pio_ppudr = 0xFFFF0000;
+ /* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */
+ cfg->ebi_csa =
+ AT91_MATRIX_EBI0_DBPUC | AT91_MATRIX_EBI0_VDDIOMSEL_3_3V |
+ AT91_MATRIX_EBI0_CS1A_SDRAMC;
+
+ cfg->smc_cs = 3;
+ cfg->smc_mode =
+ AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+ AT91_SMC_DBW_8 |
+ AT91_SMC_EXNWMODE_DISABLE |
+ AT91_SMC_TDF_(2);
+ cfg->smc_cycle =
+ AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5);
+ cfg->smc_pulse =
+ AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) |
+ AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3);
+ cfg->smc_setup =
+ AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) |
+ AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0);
+
+ cfg->pmc_mor = AT91_PMC_OSCBYPASS;
+ cfg->pmc_pllar =
+ AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */
+ AT91_PMC_PLLCOUNT | /* PLL Counter */
+ (0 << 28) | /* PLL Clock Frequency Range */
+ ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV);
+ /* PCK/2 = MCK Master Clock from PLLA */
+ cfg->pmc_mckr1 =
+ AT91_PMC_CSS_SLOW |
+ AT91_PMC_PRES_1 |
+ AT91SAM9_PMC_MDIV_2 |
+ AT91_PMC_PDIV_1;
+ /* PCK/2 = MCK Master Clock from PLLA */
+ cfg->pmc_mckr2 =
+ AT91_PMC_CSS_PLLA |
+ AT91_PMC_PRES_1 |
+ AT91SAM9_PMC_MDIV_2 |
+ AT91_PMC_PDIV_1;
+
+ /* SDRAM */
+ /* SDRAMC_TR - Refresh Timer register */
+ cfg->sdrc_tr1 = 0x13C;
+ /* SDRAMC_CR - Configuration register*/
+ cfg->sdrc_cr =
+ AT91_SDRAMC_NR_13 |
+ AT91_SDRAMC_NC_9 |
+ AT91_SDRAMC_NB_4 |
+ AT91_SDRAMC_CAS_2 |
+ AT91_SDRAMC_DBW_32 |
+ (2 << 8) | /* Write Recovery Delay */
+ (7 << 12) | /* Row Cycle Delay */
+ (2 << 16) | /* Row Precharge Delay */
+ (2 << 20) | /* Row to Column Delay */
+ (5 << 24) | /* Active to Precharge Delay */
+ (8 << 28); /* Exit Self Refresh to Active Delay */
+
+ /* Memory Device Register -> SDRAM */
+ cfg->sdrc_mdr = AT91_SDRAMC_MD_SDRAM;
+ /* SDRAM_TR */
+ cfg->sdrc_tr2 = (MASTER_CLOCK * 7);
+
+ /* user reset enable */
+ cfg->rstc_rmr =
+ AT91_RSTC_KEY |
+ AT91_RSTC_PROCRST |
+ AT91_RSTC_RSTTYP_WAKEUP |
+ AT91_RSTC_RSTTYP_WATCHDOG;
+}
diff --git a/arch/arm/configs/tny_a9263_bootstrap_defconfig b/arch/arm/configs/tny_a9263_bootstrap_defconfig
new file mode 100644
index 0000000..d968b6f
--- /dev/null
+++ b/arch/arm/configs/tny_a9263_bootstrap_defconfig
@@ -0,0 +1,26 @@
+CONFIG_ARCH_AT91SAM9263=y
+CONFIG_MACH_TNY_A9263=y
+CONFIG_AT91_BOOTSTRAP=y
+CONFIG_BAREBOX_MAX_IMAGE_SIZE=0x12000
+CONFIG_AEABI=y
+# CONFIG_CMD_ARM_CPUINFO is not set
+CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
+CONFIG_ENVIRONMENT_VARIABLES=y
+CONFIG_PBL_IMAGE=y
+CONFIG_MMU=y
+CONFIG_MALLOC_DUMMY=y
+CONFIG_PROMPT="USB-9263:"
+CONFIG_SHELL_NONE=y
+CONFIG_CONSOLE_SIMPLE=y
+# CONFIG_DEFAULT_ENVIRONMENT is not set
+# CONFIG_SPI is not set
+CONFIG_MTD=y
+# CONFIG_MTD_WRITE is not set
+# CONFIG_MTD_OOB_DEVICE is not set
+CONFIG_NAND=y
+# CONFIG_NAND_ECC_HW is not set
+# CONFIG_NAND_ECC_HW_SYNDROME is not set
+# CONFIG_NAND_ECC_HW_NONE is not set
+CONFIG_NAND_ATMEL=y
+# CONFIG_FS_RAMFS is not set
+CONFIG_BOOTSTRAP_DEVFS=y
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 4323d7c..dfa062d 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -351,6 +351,7 @@ config MACH_PM9263
config MACH_TNY_A9263
bool "CALAO TNY-A9263"
select SUPPORT_CALAO_MOB_TNY_MD2
+ select MACH_HAS_LOWLEVEL_INIT
help
Select this if you are using a Calao Systems TNY-A9263.
<http://www.calao-systems.com>
--
1.7.10.4
More information about the barebox
mailing list