[RFC PATCH 1/1] omap: xload: switch to generic bootstrap

[Jean-Christophe PLAGNIOL-VILLARD]

On 23:13 Wed 30 Jan     , Sascha Hauer wrote:
> On Mon, Jan 21, 2013 at 03:38:01PM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote:
> > Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
> > ---
> > Hi,
> > 
> > 	just compiled not tested
> 
> Just tested on panda, this does not work.
> 
> > +static __noreturn int omap_xload(void)
> > +{
> > +	int (*func)(void) = NULL;
> > +
> > +	switch (omap_bootsrc())
> > +	{
> 
> { should be in the previous line.
> 
> > +	case OMAP_BOOTSRC_MMC1:
> > +		printf("booting from MMC1\n");
> > +		func = bootstrap_read_disk("disk0.0", NULL);
> 
> For some reason the autodetection does not work, with "fat" it works. I
> haven't investigated why. Anything else but fat does not make sense
> anyway since the OMAP ROM code expects a FAT for the MLO here and barebox
> is on the same partition.

and so I update the code and re-resend it

btw the binary is smaller with the new bootstrap code

Best Regards,
J.
> 
> > +		break;
> > +	case OMAP_BOOTSRC_USB1:
> > +		if (IS_ENABLED(CONFIG_FS_OMAP4_USBBOOT)) {
> > +			printf("booting from USB1\n");
> > +			func = bootstrap_read_disk("omap4_usbboot", "omap4_usbbootfs");
> 
> 'func' is set but not used now.
> 
> Sascha
> 
> 
> -- 
> Pengutronix e.K.                           |                             |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |