October 2016 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Sat Oct 1 00:35:47 PDT 2016
Ending: Mon Oct 31 23:30:05 PDT 2016
Messages: 705

• [LEDE-DEV] [RFC 0/1] x86: Add support for the PC Engines APU2 Board   STR .
• [LEDE-DEV] [RFC 0/1] x86: Add support for the PC Engines APU2 Board   STR .
• [LEDE-DEV] [RFC 0/1] x86: Add support for the PC Engines APU2 Board   STR .
• [LEDE-DEV] [RFC 0/6 v2] Add the PC Engines APU2 to LEDE   STR .
• [LEDE-DEV] netifd question(s) about moving a device from one bridge to another   Alexandru Ardelean
• [LEDE-DEV] [PATCH] ubus cli: wait_for: fix race causing false timeouts   Alexandru Ardelean
• [LEDE-DEV] [PATCH][ubus] cli: register event handler first, then do lookup   Alexandru Ardelean
• [LEDE-DEV] Need help with package dependencies   Alexandru Ardelean
• [LEDE-DEV] lots of broken packages   Alexandru Ardelean
• [LEDE-DEV] Patches to web   Marvin Arnold
• [LEDE-DEV] [PATCH] Correct kernel sign-off docs reference   Marvin Arnold
• [LEDE-DEV] [OpenWrt-Devel] [PATCH] blobmsg_json: handle conversion of large integers from JSON   Eyal Birger
• [LEDE-DEV] [patch master 00/15] shell code improvement for /scripts   Bastian Bittorf
• [LEDE-DEV] Automated shell code debugging   Bastian Bittorf
• [LEDE-DEV] [patch master 05/15] Use cd ... || exit in case cd fails   Bastian Bittorf
• [LEDE-DEV] Call defines for minifying scripting languages   Bastian Bittorf
• [LEDE-DEV] Call defines for minifying scripting languages   Bastian Bittorf
• [LEDE-DEV] Automated shell code debugging   Bastian Bittorf
• [LEDE-DEV] [PATCH v3 04/13] scripts: $/${} is unnecessary on arithmetic variables   Bastian Bittorf
• [LEDE-DEV] [PATCH v3 04/13] scripts: $/${} is unnecessary on arithmetic variables   Bastian Bittorf
• [LEDE-DEV] [PATCH v3 1/4] base-files: generate /etc/config/wireless, if it doesn't exist   Bastian Bittorf
• [LEDE-DEV] [PATCH] base-files: ensure reset only works if an overlay exists   Bastian Bittorf
• [LEDE-DEV] iw / ath9k / mediatek / strange values for 'signal'   Bastian Bittorf
• [LEDE-DEV] [PATCH] base-files: ensure reset only works if an overlay exists   Bastian Bittorf
• [LEDE-DEV] [PATCH v4] base-files: Ensure reset only works if an overlay exists   Bastian Bittorf
• [LEDE-DEV] [PATCH v4] base-files: Ensure reset only works if an overlay exists   Bastian Bittorf
• [LEDE-DEV] [PATCH v3 00/13] shell code improvement for /scripts   bittorf wireless )) Bastian Bittorf
• [LEDE-DEV] [RFC 0/1] x86: Add support for the PC Engines APU2 Board   Chris Blake
• [LEDE-DEV] [RFC 1/1] x86: Add support for the PC Engines APU2 Board   Chris Blake
• [LEDE-DEV] [RFC 1/1] x86: Add support for the PC Engines APU2 Board   Chris Blake
• [LEDE-DEV] [RFC 1/1] x86: Add support for the PC Engines APU2 Board   Chris Blake
• [LEDE-DEV] [PATCH] base-files: ensure reset only works if an overlay exists   Chris Blake
• [LEDE-DEV] [PATCH 1/1] package/utils: Add beep package   Chris Blake
• [LEDE-DEV] [PATCH 1/3] ar71xx: Move MR12 & MR16 from legacy to generic   Chris Blake
• [LEDE-DEV] [PATCH 2/3] ar71xx: add mac partition to the MR12/MR16   Chris Blake
• [LEDE-DEV] [PATCH 3/3] ar71xx: Remove switch config for the MR12/MR16   Chris Blake
• [LEDE-DEV] [PATCH] base-files: ensure reset only works if an overlay exists   Chris Blake
• [LEDE-DEV] [PATCH] base-files: ensure reset only works if an overlay exists   Chris Blake
• [LEDE-DEV] [PATCH v2] base-files: ensure reset only works if an overlay exists   Chris Blake
• [LEDE-DEV] [PATCH v2] base-files: ensure reset only works if an overlay exists   Chris Blake
• [LEDE-DEV] [PATCH v2] base-files: ensure reset only works if an overlay exists   Chris Blake
• [LEDE-DEV] [PATCH 1/3 v2] ar71xx: Move MR12 & MR16 from legacy to generic   Chris Blake
• [LEDE-DEV] [PATCH 2/3 v2] ar71xx: add mac partition to the MR12/MR16   Chris Blake
• [LEDE-DEV] [PATCH 3/3 v2] ar71xx: Remove switch config for the MR12/MR16   Chris Blake
• [LEDE-DEV] [PATCH] base-files: ensure reset only works if an overlay exists   Chris Blake
• [LEDE-DEV] [PATCH] base-files: ensure reset only works if an overlay exists   Chris Blake
• [LEDE-DEV] [RFC 0/6 v2] Add the PC Engines APU2 to LEDE   Chris Blake
• [LEDE-DEV] [RFC 1/6 v2] Generic: Backport sp5100_tco patches for AMD platforms   Chris Blake
• [LEDE-DEV] [RFC 2/6 v2] x86: Add LED & GPIO drivers for the PC Engines APU2 board   Chris Blake
• [LEDE-DEV] [RFC 3/6 v2] x86: Add sp5100_tco as a kernel module   Chris Blake
• [LEDE-DEV] [RFC 4/6 v2] Generic: Crypto - aesni - add ccm(aes) algorithm implementation   Chris Blake
• [LEDE-DEV] [RFC 5/6 v2] x86: Update the x86_64 kernel config   Chris Blake
• [LEDE-DEV] [RFC 6/6 v2] x86: Add a Profile for the PC Engines APU2 board   Chris Blake
• [LEDE-DEV] [RFC 0/6 v2] Add the PC Engines APU2 to LEDE   Chris Blake
• [LEDE-DEV] [RFC 4/6 v2] Generic: Crypto - aesni - add ccm(aes) algorithm implementation   Chris Blake
• [LEDE-DEV] [PATCH v4] base-files: Ensure reset only works if an overlay exists   Chris Blake
• [LEDE-DEV] [PATCH v4] base-files: Ensure reset only works if an overlay exists   Chris Blake
• [LEDE-DEV] [PATCH v5] base-files: Ensure reset only works if an overlay exists   Chris Blake
• [LEDE-DEV] [PATCH 1/3 v3] ar71xx: Move MR12 & MR16 from legacy to generic   Chris Blake
• [LEDE-DEV] [PATCH 2/3 v3] ar71xx: add mac partition to the MR12/MR16   Chris Blake
• [LEDE-DEV] [PATCH 3/3 v3] ar71xx: Remove switch config for the MR12/MR16   Chris Blake
• [LEDE-DEV] [PATCH 1/1] package/utils: Add beep package   Chris Blake
• [LEDE-DEV] [PATCH 1/1] package/utils: Add beep package   Chris Blake
• [LEDE-DEV] [RFC 3/6 v2] x86: Add sp5100_tco as a kernel module   Chris Blake
• [LEDE-DEV] Speedport W504V | ARV8539PW22 - How to Configure vDSL2 with VLANID ?   Martin Blumenstingl
• [LEDE-DEV] [PATCH] owl-loader: allow 4KiB EEPROMs   Martin Blumenstingl
• [LEDE-DEV] [PATCH] kernel: owl-loader: fix EEPROM size validation for 4KiB EEPROMs   Martin Blumenstingl
• [LEDE-DEV] [PATCH] kernel: owl-loader: fix EEPROM size validation for 4KiB EEPROMs   Martin Blumenstingl
• [LEDE-DEV] Arcadyan vrv9510kwac23   Martin Blumenstingl
• [LEDE-DEV] buildroot broken on debian jessie   Martin Blumenstingl
• [LEDE-DEV] [PATCH 3/3] lantiq: add device tree binding for dwc2 on danube   Martin Blumenstingl
• [LEDE-DEV] [BUG] Kernel crashes with ath10k radio and Nexus 5X clients   Phil Bradley-Schmieg
• [LEDE-DEV] [wiki]Wiki structure proposals and some questions   Rich Brown
• [LEDE-DEV] [wiki]Wiki structure proposals and some questions   Rich Brown
• [LEDE-DEV] [wiki]Wiki structure proposals and some questions   Rich Brown
• [LEDE-DEV] [patch master 01/15] Double quote to prevent globbing and word splitting   Oswald Buddenhagen
• [LEDE-DEV] [patch master 05/15] Use cd ... || exit in case cd fails   Oswald Buddenhagen
• [LEDE-DEV] [patch master 05/15] Use cd ... || exit in case cd fails   Oswald Buddenhagen
• [LEDE-DEV] [patch master 08/15] Use $(..) instead of legacy `..`   Oswald Buddenhagen
• [LEDE-DEV] [patch master 10/15] quote literal {   Oswald Buddenhagen
• [LEDE-DEV] [patch master 12/15] use * instead of @ to concatenate   Oswald Buddenhagen
• [LEDE-DEV] [patch master 13/15] To read lines rather than words, pipe/redirect to a 'while read' loop   Oswald Buddenhagen
• [LEDE-DEV] [patch master 14/15] Expressions don't expand in single quotes, use double quotes for that   Oswald Buddenhagen
• [LEDE-DEV] [patch master 11/15] Consider using { cmd1; cmd2; } >> file instead of individual redirects   Oswald Buddenhagen
• [LEDE-DEV] [patch master 15/15] read without -r will mangle backslashes   Oswald Buddenhagen
• [LEDE-DEV] Speedport W504V | ARV8539PW22 - gets very hot !   Oswald Buddenhagen
• [LEDE-DEV] Call defines for minifying scripting languages   Oswald Buddenhagen
• [LEDE-DEV] [PATCH v2] uboot-envtools: remove function vals and fix indentation   Oswald Buddenhagen
• [LEDE-DEV] [PATCH] busybox: prevent globbing, splitting   Oswald Buddenhagen
• [LEDE-DEV] [patch master 05/15] Use cd ... || exit in case cd fails   Alberto Bursi
• [LEDE-DEV] Gustavo Sverzut Barbieri: Demystifying systemd for embedded systems   Alberto Bursi
• [LEDE-DEV] replacing files in base system from a package?   Alberto Bursi
• [LEDE-DEV] replacing files in base system from a package?   Alberto Bursi
• [LEDE-DEV] [wiki]Wiki structure   Alberto Bursi
• [LEDE-DEV] Vagrant file for Lede development   Alberto Bursi
• [LEDE-DEV] Adding a extroot-ready firmware image to download repositories   Alberto Bursi
• [LEDE-DEV] Adding a extroot-ready firmware image to download repositories   Alberto Bursi
• [LEDE-DEV] Vagrant file for Lede development   Alberto Bursi
• [LEDE-DEV] Added wiki links to the LEDE site, can someone merge the PR?   Alberto Bursi
• [LEDE-DEV] block utility of block-mount enable other filesystems   Alberto Bursi
• [LEDE-DEV] [PATCH]fstools: added xfs and f2fs to block-mount   Alberto Bursi
• [LEDE-DEV] [RFC 0/1] x86: Add support for the PC Engines APU2 Board   Alberto Bursi
• [LEDE-DEV] [PATCH]fstools: added xfs and f2fs to block-mount   Alberto Bursi
• [LEDE-DEV] [RFC 0/1] x86: Add support for the PC Engines APU2 Board   Alberto Bursi
• [LEDE-DEV] [PATCH]fstools: added xfs and f2fs to block-mount   Alberto Bursi
• [LEDE-DEV] [RFC 3/3] config: ext4: use 1K blocks by default to support online resize2fs   Alberto Bursi
• [LEDE-DEV] [PATCH]fstools: added f2fs to block-mount   Alberto Bursi
• [LEDE-DEV] [PATCH] fstools: added f2fs to block-mount   Alberto Bursi
• [LEDE-DEV] bcm63xx and fxs is possible...   Alberto Bursi
• [LEDE-DEV] [PATCH] fstools: added f2fs to block-mount, correct indentation   Alberto Bursi
• [LEDE-DEV] [PATCH] [PATCH] fstools: added f2fs to block-mount, really correct indentation   Alberto Bursi
• [LEDE-DEV] sorry for the mail/patch spam   Alberto Bursi
• [LEDE-DEV] Actual community change and additional developers compared to OpenWrt   Alberto Bursi
• [LEDE-DEV] Actual community change and additional developers compared to OpenWrt   Alberto Bursi
• [LEDE-DEV] Actual community change and additional developers compared to OpenWrt   Alberto Bursi
• [LEDE-DEV] [RFC v2 3/3] config: ext4: increase x86 rootfs size to 2GB to support online resize2fs   Alberto Bursi
• [LEDE-DEV] [PATCH] fstools: added f2fs to block-mount, rebased   Alberto Bursi
• [LEDE-DEV] [PATCH] [rebased] fstools: added f2fs to block   Alberto Bursi
• [LEDE-DEV] Stability & release plans -- CVE-2016-5195   Alberto Bursi
• [LEDE-DEV] [patch master 00/15] shell code improvement for /scripts   Jan-Tarek Butt
• [LEDE-DEV] Automated shell code debugging   Jan-Tarek Butt
• [LEDE-DEV] [patch master 01/15 v2] Double quote to prevent globbing and word splitting   Jan-Tarek Butt
• [LEDE-DEV] mailman force using ssl   Jan-Tarek Butt
• [LEDE-DEV] [patch master 05/15] Use cd ... || exit in case cd fails   Jan-Tarek Butt
• [LEDE-DEV] [patch master 05/15] Use cd ... || exit in case cd fails   Jan-Tarek Butt
• [LEDE-DEV] [PATCH v2] Use cd ... || exit in case cd fails   Jan-Tarek Butt
• [LEDE-DEV] [PATCH v2] redirect matters, the 2>&1 has to be last.   Jan-Tarek Butt
• [LEDE-DEV] [PATCH v2] Quote to prevent word splitting   Jan-Tarek Butt
• [LEDE-DEV] [PATCH v2] Use $(..) instead of legacy `..`   Jan-Tarek Butt
• [LEDE-DEV] [patch master 10/15] quote literal {   Jan-Tarek Butt
• [LEDE-DEV] [PATCH v2] Consider using { cmd1; cmd2; } >> file instead of individual redirects   Jan-Tarek Butt
• [LEDE-DEV] [patch master 13/15] To read lines rather than words, pipe/redirect to a 'while read' loop   Jan-Tarek Butt
• [LEDE-DEV] [patch master 14/15] Expressions don't expand in single quotes, use double quotes for that   Jan-Tarek Butt
• [LEDE-DEV] [PATCH v2] read without -r will mangle backslashes   Jan-Tarek Butt
• [LEDE-DEV] [PATCH] package/uboot-envtools.sh remove function vals and fix indentation   Jan-Tarek Butt
• [LEDE-DEV] [PATCH] LuaSrcDiet call define for lua code Minifying   Jan-Tarek Butt
• [LEDE-DEV] [PATCH] add luaSrcDiet call define to package.mk   Jan-Tarek Butt
• [LEDE-DEV] Call defines for minifying scripting languages   Jan-Tarek Butt
• [LEDE-DEV] Call defines for minifying scripting languages   Jan-Tarek Butt
• [LEDE-DEV] Call defines for minifying scripting languages   Jan-Tarek Butt
• [LEDE-DEV] Call defines for minifying scripting languages   Jan-Tarek Butt
• [LEDE-DEV] package/boot/uboot-envtools/files/uboot-envtools.sh   Jan-Tarek Butt
• [LEDE-DEV] [PATCH] package/utils/nvram/files/nvram.init * Double quote to prevent globbing and word splitting. * $/${} is unnecessary on arithmetic variables. * remove unused variables   Jan-Tarek Butt
• [LEDE-DEV] [PATCH] package/utils/ct-bugcheck/src/bugcheck.sh * Double quote to prevent globbing and word splitting. * { cmd1; cmd2; } >> file instead of individual redirects. * fix formating   Jan-Tarek Butt
• [LEDE-DEV] package/boot/uboot-envtools/files/uboot-envtools.sh   Jan-Tarek Butt
• [LEDE-DEV] [PATCH 1/3] nvram: fix globbing, word splitting and arithmetic variables   Jan-Tarek Butt
• [LEDE-DEV] [PATCH 2/3] ct-bugcheck: fix globbing, word splitting and formatting   Jan-Tarek Butt
• [LEDE-DEV] [PATCH 1/3] nvram: fix globbing, word splitting and arithmetic variables   Jan-Tarek Butt
• [LEDE-DEV] Automated shell code debugging   Jan-Tarek Butt
• [LEDE-DEV] [PATCH v2] nvram: fix globbing, word splitting and arithmetic variables   Jan-Tarek Butt
• [LEDE-DEV] [PATCH v2] ct-bugcheck: fix globbing, word splitting and formatting   Jan-Tarek Butt
• [LEDE-DEV] [PATCH v2] ct-bugcheck: fix globbing, word splitting and formatting   Jan-Tarek Butt
• [LEDE-DEV] [PATCH v2] include: add luaSrcDiet call define to package.mk   Jan-Tarek Butt
• [LEDE-DEV] package/boot/uboot-envtools/files/uboot-envtools.sh   Jan-Tarek Butt
• [LEDE-DEV] [PATCH v2] uboot-envtools: remove function vals and fix indentation   Jan-Tarek Butt
• [LEDE-DEV] [PATCH v3 00/13] shell code improvement for /scripts   Jan-Tarek Butt
• [LEDE-DEV] [PATCH v3 01/13] scripts: Double quote to prevent globbing and word splitting   Jan-Tarek Butt
• [LEDE-DEV] [PATCH v3 02/13] scripts: fix formatting   Jan-Tarek Butt
• [LEDE-DEV] [PATCH v3 03/13] scripts: add and fix shebang   Jan-Tarek Butt
• [LEDE-DEV] [PATCH v3 04/13] scripts: $/${} is unnecessary on arithmetic variables   Jan-Tarek Butt
• [LEDE-DEV] [PATCH v3 05/13] scripts: Use cd ... || exit in case cd fails   Jan-Tarek Butt
• [LEDE-DEV] [PATCH v3 06/13] scripts: redirect matters, the 2>&1 has to be last   Jan-Tarek Butt
• [LEDE-DEV] [PATCH v3 07/13] scripts: Quote to prevent word splitting   Jan-Tarek Butt
• [LEDE-DEV] [PATCH v3 08/13] scripts: Use $(..) instead of legacy `..`   Jan-Tarek Butt
• [LEDE-DEV] [PATCH v3 09/13] scripts: Argument mixes string and array. Use $*   Jan-Tarek Butt
• [LEDE-DEV] [PATCH v3 10/13] scripts: quote literal {   Jan-Tarek Butt
• [LEDE-DEV] [PATCH v3 11/13] scripts: using { cmd1; cmd2; } >> file instead of individual redirects   Jan-Tarek Butt
• [LEDE-DEV] [PATCH v3 12/13] scripts: use * instead of @ to concatenate   Jan-Tarek Butt
• [LEDE-DEV] [PATCH v3 13/13] scripts: read without -r will mangle backslashes   Jan-Tarek Butt
• [LEDE-DEV] [PATCH v3 04/13] scripts: $/${} is unnecessary on arithmetic variables   Jan-Tarek Butt
• [LEDE-DEV] [PATCH] ct-bugcheck: fix globbing, word splitting and change formatting   Jan-Tarek Butt
• [LEDE-DEV] [PATCH] busybox: prevent globbing, splitting   Jan-Tarek Butt
• [LEDE-DEV] [PATCH] busybox: prevent globbing, word splitting   Jan-Tarek Butt
• [LEDE-DEV] regulatory domain information   Charles
• [LEDE-DEV] regulatory domain information   Charles
• [LEDE-DEV] regulatory domain information   Charles
• [LEDE-DEV] regulatory domain information   Charles
• [LEDE-DEV] meetup for beer on Tuesday 11 Oct, Berlin   Alexander Couzens
• [LEDE-DEV] [Reminder] meetup for beer on Tuesday 11 Oct, Berlin   Alexander Couzens
• [LEDE-DEV] [PATCH 1/2] generic: ar8216: fix ar8xxx_is_possible check   John Crispin
• [LEDE-DEV] [PATCH 1/2] generic: ar8216: fix ar8xxx_is_possible check   John Crispin
• [LEDE-DEV] package/boot/uboot-envtools/files/uboot-envtools.sh   John Crispin
• [LEDE-DEV] package/boot/uboot-envtools/files/uboot-envtools.sh   John Crispin
• [LEDE-DEV] [PATCH 1/3] nvram: fix globbing, word splitting and arithmetic variables   John Crispin
• [LEDE-DEV] [PATCH 2/3] ct-bugcheck: fix globbing, word splitting and formatting   John Crispin
• [LEDE-DEV] Adding support for dlink dwr-512   John Crispin
• [LEDE-DEV] [PATCH v2 1/2] generic: ar8216: improve ar8xxx_is_possible check   John Crispin
• [LEDE-DEV] [PATCH v2] ct-bugcheck: fix globbing, word splitting and formatting   John Crispin
• [LEDE-DEV] [PATCH v3 04/13] scripts: $/${} is unnecessary on arithmetic variables   John Crispin
• [LEDE-DEV] [PATCH] ct-bugcheck: fix globbing, word splitting and change formatting   John Crispin
• [LEDE-DEV] [RFC 1/1] x86: Add support for the PC Engines APU2 Board   John Crispin
• [LEDE-DEV] [RFC 1/1] x86: Add support for the PC Engines APU2 Board   John Crispin
• [LEDE-DEV] [PATCH]fstools: added xfs and f2fs to block-mount   John Crispin
• [LEDE-DEV] [PATCH]fstools: added xfs and f2fs to block-mount   John Crispin
• [LEDE-DEV] [PATCH] Add support for Comfast E380AC v1 and v2   John Crispin
• [LEDE-DEV] [PATCH] Add support for Comfast E380AC v1 and v2   John Crispin
• [LEDE-DEV] [PATCH] rsyslog: do not daemonize and allow procd to manage rsyslogd   John Crispin
• [LEDE-DEV] [PATCHv2] ipq806x: add support for ZyXEL NBG6817   John Crispin
• [LEDE-DEV] [PATCHv2] ipq806x: add support for ZyXEL NBG6817   John Crispin
• [LEDE-DEV] [PATCHv2] ipq806x: add support for ZyXEL NBG6817   John Crispin
• [LEDE-DEV] ramips: MT7621 Ethernet IRQ Balancing   John Crispin
• [LEDE-DEV] [PATCH 2/3] ar71xx: add mac partition to the MR12/MR16   John Crispin
• [LEDE-DEV] [PATCH] kirkwood: remove redundant code in etc/board.d/02_network   John Crispin
• [LEDE-DEV] [PATCH] package/system/mtd: fix usage message   John Crispin
• [LEDE-DEV] [PATCH 2/3 v2] ar71xx: add mac partition to the MR12/MR16   John Crispin
• [LEDE-DEV] [PATCH V2 0/7] add support for D-Link DAP-2695 rev. A1   John Crispin
• [LEDE-DEV] [PATCH] [PATCH] fstools: added f2fs to block-mount, really correct indentation   John Crispin
• [LEDE-DEV] [PATCH] package/boot/uboot-kirkwood: bump to upstream 2016.09.01   John Crispin
• [LEDE-DEV] [PATCH] fstools: added f2fs to block-mount, rebased   John Crispin
• [LEDE-DEV] [PATCH 1/1] package/utils: Add beep package   John Crispin
• [LEDE-DEV] [PATCH] base-files: sysfixtime: Allow system time in local timezones   John Crispin
• [LEDE-DEV] [PATCH v3 03/13] scripts: add and fix shebang   John Crispin
• [LEDE-DEV] [PATCH v3 02/13] scripts: fix formatting   John Crispin
• [LEDE-DEV] [PATCH v3 01/13] scripts: Double quote to prevent globbing and word splitting   John Crispin
• [LEDE-DEV] [PATCH v3 00/13] shell code improvement for /scripts   John Crispin
• [LEDE-DEV] [PATCH] initramfs: Escape colons in depfile   John Crispin
• [LEDE-DEV] [PATCH] brcm47xx: add support for per-device rootfs   John Crispin
• [LEDE-DEV] OpenVPN capath + cafile uci options   John Crispin
• [LEDE-DEV] [PATCH] package net/cifs-utils: missing dependency?   John Crispin
• [LEDE-DEV] Archer C7(v2) - Question   Jens DPunkt
• [LEDE-DEV] buildroot broken on debian jessie   Alexander Dahl
• [LEDE-DEV] [PATCH] ext4: Add missing kmod-crypto-crc32c dependency   Daniel Danzberger
• [LEDE-DEV] [RFC netifd] Bridge member name issue when using aliased interface   Hans Dedecker
• [LEDE-DEV] [PATCH netifd 1/2] bridge: Don't use device name as bridge member name   Hans Dedecker
• [LEDE-DEV] [PATCH netifd 2/2] wireless: Call wireless_interface_handle_link before deleting the vif   Hans Dedecker
• [LEDE-DEV] Fwd: WPJ344 libphy not finding AR8337 for eth0.   Nick Dennis
• [LEDE-DEV] WPJ344 libphy not finding AR8337 for eth0.   Nick Dennis
• [LEDE-DEV] [PATCH] base-files: sysfixtime: Allow system time in local timezones   Daniel Dickinson
• [LEDE-DEV] [PATCH] base-files: sysfixtime: Allow system time in local timezones   Daniel Dickinson
• [LEDE-DEV] Need help with package dependencies   Daniel Dickinson
• [LEDE-DEV] Firewall UCI has non-working 'utc_time 0'   Daniel Dickinson
• [LEDE-DEV] Getting 'too many bounces' notification   Daniel Dickinson
• [LEDE-DEV] Actual community change and additional developers compared to OpenWrt   Daniel Dickinson
• [LEDE-DEV] Apologies; reimplementing delay   Daniel Dickinson
• [LEDE-DEV] buildroot broken on debian jessie   Dirk
• [LEDE-DEV] buildroot broken on debian jessie   Dirk
• [LEDE-DEV] buildroot broken on debian jessie   Dirk
• [LEDE-DEV] buildroot broken on debian jessie   Dirk
• [LEDE-DEV] buildroot broken on debian jessie   Dirk
• [LEDE-DEV] Call defines for minifying scripting languages   Piotr Dymacz
• [LEDE-DEV] [PATCH v2 2/2] ar71xx: add support for the Airtight C-60   Piotr Dymacz
• [LEDE-DEV] [PATCH] Add support for Comfast E380AC v1 and v2   Piotr Dymacz
• [LEDE-DEV] [PATCH] Add support for Comfast E380AC v1 and v2   Piotr Dymacz
• [LEDE-DEV] [wiki] Creation of discussion pages simplified   Thomas Endt
• [LEDE-DEV] [LEDE DEV][wiki] Login with github   Thomas Endt
• [LEDE-DEV] [LEDE DEV][wiki] Login with github   Thomas Endt
• [LEDE-DEV] [LEDE DEV][wiki] Template switcher / mobile version added   Thomas Endt
• [LEDE-DEV] [wiki]Wiki structure   Thomas Endt
• [LEDE-DEV] [wiki] ditaa: Converts ASCII to nice graphics   Thomas Endt
• [LEDE-DEV] [wiki]Wiki structure   Thomas Endt
• [LEDE-DEV] Request for help: Getting 3rd party libs/apps up to date   Daniel Engberg
• [LEDE-DEV] Request for help: Getting 3rd party libs/apps up to date   Daniel Engberg
• [LEDE-DEV] Request for help: Getting 3rd party libs/apps up to date   Daniel Engberg
• [LEDE-DEV] [PATCH] netifd: Set source address for static address routes   Kristian Evensen
• [LEDE-DEV] DirtyCOW backport   James Feeney
• [LEDE-DEV] Actual community change and additional developers compared to OpenWrt   James Feeney
• [LEDE-DEV] Dependency issues on custom packages and USE_MUSL visibility   Carlos Ferreira
• [LEDE-DEV] TR-069 for OpenWrt (part 2)   Dirk Feytons
• [LEDE-DEV] [PATCH 1/2] uci/lua: add list_configs() function   Dirk Feytons
• [LEDE-DEV] [patch master 05/15] Use cd ... || exit in case cd fails   Felix Fietkau
• [LEDE-DEV] [PATCH 2/2] base-files: support usbport LED trigger   Felix Fietkau
• [LEDE-DEV] [PATCH] ubus cli: wait_for: fix race causing false timeouts   Felix Fietkau
• [LEDE-DEV] [PATCH] tools: bump qemu to 2.7.0   Felix Fietkau
• [LEDE-DEV] [PATCH] procd: fix build when DEBUG is set   Felix Fietkau
• [LEDE-DEV] [PATCH v3 3/4] base-files, mac80211, broadcom-wl: wifi detection and configuration   Felix Fietkau
• [LEDE-DEV] [PATCH]fstools: added f2fs to block-mount   Felix Fietkau
• [LEDE-DEV] [PATCH] base-files: sysfixtime: Allow system time in local timezones   Felix Fietkau
• [LEDE-DEV] [PATCHv2] ipq806x: add support for ZyXEL NBG6817   Felix Fietkau
• [LEDE-DEV] [PATCHv2] ipq806x: add support for ZyXEL NBG6817   Felix Fietkau
• [LEDE-DEV] [PATCH] base-files: sysfixtime: Allow system time in local timezones   Felix Fietkau
• [LEDE-DEV] uqmi: re-enable autoconnect which was dropped without explanation   Felix Fietkau
• [LEDE-DEV] [PATCHv2] ipq806x: add support for ZyXEL NBG6817   Felix Fietkau
• [LEDE-DEV] [PATCHv2] ipq806x: add support for ZyXEL NBG6817   Felix Fietkau
• [LEDE-DEV] [RFC 1/6 v2] Generic: Backport sp5100_tco patches for AMD platforms   Felix Fietkau
• [LEDE-DEV] [RFC 2/6 v2] x86: Add LED & GPIO drivers for the PC Engines APU2 board   Felix Fietkau
• [LEDE-DEV] [RFC 3/6 v2] x86: Add sp5100_tco as a kernel module   Felix Fietkau
• [LEDE-DEV] [PATCH v3 1/5] ipq806x/nbg6817: add support for ZyXEL NBG6817   Felix Fietkau
• [LEDE-DEV] [PATCH v3 1/5] ipq806x/nbg6817: add support for ZyXEL NBG6817   Felix Fietkau
• [LEDE-DEV] [PATCH v3 3/5] ipq806x/nbg6817: add sysupgrade support   Felix Fietkau
• [LEDE-DEV] [PATCH v3 3/5] ipq806x/nbg6817: add sysupgrade support   Felix Fietkau
• [LEDE-DEV] regulatory domain information   Felix Fietkau
• [LEDE-DEV] [RFC v2 3/3] config: ext4: increase x86 rootfs size to 2GB to support online resize2fs   Felix Fietkau
• [LEDE-DEV] [PATCH] OLIMEX A13-SOM does not boot on latest lede source   Mario Fischer
• [LEDE-DEV] o2 box 6431 / VGV7510KW22 - SIP with FXS/TAE Ports | owsip or alternative ?   Daniel Golle
• [LEDE-DEV] [PATCH v2 4/5] base-files, mac80211, broadcom-wl: plug-and-play wifi detection   Jonas Gorski
• [LEDE-DEV] [PATCH v2 2/5] mac80211: use uci to generate wireless config file   Jonas Gorski
• [LEDE-DEV] [PATCH v2 4/5] base-files, mac80211, broadcom-wl: plug-and-play wifi detection   Jonas Gorski
• [LEDE-DEV] Reproducible builds & feeds   Jonas Gorski
• [LEDE-DEV] bcm63xx and fxs is possible...   Jonas Gorski
• [LEDE-DEV] [PATCH] ct-bugcheck: fix globbing, word splitting and change formatting   Ben Greear
• [LEDE-DEV] [RFC 0/1] x86: Add support for the PC Engines APU2 Board   Ben Greear
• [LEDE-DEV] [RFC 0/1] x86: Add support for the PC Engines APU2 Board   Ben Greear
• [LEDE-DEV] uImage too big for Netgear R7800   Ben Greear
• [LEDE-DEV] [PATCH] rsyslog: do not daemonize and allow procd to manage rsyslogd   Alexis Green
• [LEDE-DEV] [PATCH v4] base-files: Ensure reset only works if an overlay exists   Alexis Green
• [LEDE-DEV] Vagrant file for Lede development   Simon H
• [LEDE-DEV] Vagrant file for Lede development   Simon H
• [LEDE-DEV] [RFC 2/3] config: ext4: do not set a maximum inode number by default   Michael Heimpold
• [LEDE-DEV] [RFC 3/3] config: ext4: use 1K blocks by default to support online resize2fs   Michael Heimpold
• [LEDE-DEV] [RFC 3/3] config: ext4: use 1K blocks by default to support online resize2fs   Michael Heimpold
• [LEDE-DEV] [RFC v2 1/3] include: image.mk: make ext4 reserved blocks percentage optional   Michael Heimpold
• [LEDE-DEV] [RFC v2 2/3] config: ext4: drop option to set maximum number of inodes   Michael Heimpold
• [LEDE-DEV] [RFC v2 3/3] config: ext4: increase x86 rootfs size to 2GB to support online resize2fs   Michael Heimpold
• [LEDE-DEV] [RFC v2 1/3] include: image.mk: make ext4 reserved blocks percentage optional   Michael Heimpold
• [LEDE-DEV] [BoardFarm] OpenWrt Summit Live Streaming   Benjamin Henrion
• [LEDE-DEV] LEDE Forum - Startup mode   Ted Hess
• [LEDE-DEV] LEDE Forum - Startup mode   Ted Hess
• [LEDE-DEV] [PATCH v1 1/2] base-files, mac80211, broadcom-wl: plug-and-play wifi detection   Cezary Jackiewicz
• [LEDE-DEV] [PATCH v1 1/2] base-files, mac80211, broadcom-wl: plug-and-play wifi detection   Cezary Jackiewicz
• [LEDE-DEV] 3G support for dwr-512   Cezary Jackiewicz
• [LEDE-DEV] can't install luci   Torbjorn Jansson
• [LEDE-DEV] can't install luci   Torbjorn Jansson
• [LEDE-DEV] can't install luci   Torbjorn Jansson
• [LEDE-DEV] can't install luci   Torbjorn Jansson
• [LEDE-DEV] lots of broken packages   Torbjorn Jansson
• [LEDE-DEV] lots of broken packages   Torbjorn Jansson
• [LEDE-DEV] Fwd: TP-Link Archer C7 boot loop   Jon
• [LEDE-DEV] [wiki]Wiki structure   Baptiste Jonglez
• [LEDE-DEV] [PATCH] netifd: Request DHCP option 121 (classless route) by default   Baptiste Jonglez
• [LEDE-DEV] [LEDE-DEV, netifd] proto-shell: add helpers for generic options in proto handlers   Marcin Jurkowski
• [LEDE-DEV] [PATCH v4 2/5] linux/mtd: add id for mx25u3235f needed by ZyXEL NBG6817   Arjen de Korte
• [LEDE-DEV] [PATCH v4 2/5] linux/mtd: add id for mx25u3235f needed by ZyXEL NBG6817   Arjen de Korte
• [LEDE-DEV] Adding support for dlink dwr-512   Mathias Kresin
• [LEDE-DEV] Adding support for dlink dwr-512   Mathias Kresin
• [LEDE-DEV] Adding support for dlink dwr-512   Mathias Kresin
• [LEDE-DEV] package/boot/uboot-envtools/files/uboot-envtools.sh   Mathias Kresin
• [LEDE-DEV] [PATCH] package/utils/ct-bugcheck/src/bugcheck.sh * Double quote to prevent globbing and word splitting. * { cmd1; cmd2; } >> file instead of individual redirects. * fix formating   Mathias Kresin
• [LEDE-DEV] [PATCH] package/utils/nvram/files/nvram.init * Double quote to prevent globbing and word splitting. * $/${} is unnecessary on arithmetic variables. * remove unused variables   Mathias Kresin
• [LEDE-DEV] [PATCH v2 4/5] base-files, mac80211, broadcom-wl: plug-and-play wifi detection   Mathias Kresin
• [LEDE-DEV] Adding support for dlink dwr-512   Mathias Kresin
• [LEDE-DEV] [PATCH V2 2/3] switch to the new usbport LED trigger   Mathias Kresin
• [LEDE-DEV] [PATCH V2 2/3] switch to the new usbport LED trigger   Mathias Kresin
• [LEDE-DEV] [PATCHv2] ipq806x: add support for ZyXEL NBG6817   Mathias Kresin
• [LEDE-DEV] [PATCH] base-files: ensure reset only works if an overlay exists   Mathias Kresin
• [LEDE-DEV] [PATCH] kirkwood: disable fault LEDs by default   Mathias Kresin
• [LEDE-DEV] 3G support for dwr-512   Mathias Kresin
• [LEDE-DEV] [patch master 13/15] To read lines rather than words, pipe/redirect to a 'while read' loop   Lars Kruse
• [LEDE-DEV] [patch master 05/15] Use cd ... || exit in case cd fails   Lars Kruse
• [LEDE-DEV] [patch master 01/15] Double quote to prevent globbing and word splitting   Lars Kruse
• [LEDE-DEV] LEDE Reboot r1588+145 vs LEDE Reboot r1588+257 on TP-Link Archer C7 v2 / constant bootloop on 257   Břetislav Kubesa
• [LEDE-DEV] LEDE Reboot r1588+145 vs LEDE Reboot r1588+257 on TP-Link Archer C7 v2 / constant bootloop on 257   Břetislav Kubesa
• [LEDE-DEV] Actual community change and additional developers compared to OpenWrt   Val Kulkov
• [LEDE-DEV] Call defines for minifying scripting languages   Zefir Kurtisi
• [LEDE-DEV] [PATCH] ubus cli: wait_for: fix race causing false timeouts   Zefir Kurtisi
• [LEDE-DEV] [PATCH] ubus cli: wait_for: fix race causing false timeouts   Zefir Kurtisi
• [LEDE-DEV] [PATCH] ubus cli: wait_for: fix race causing false timeouts   Zefir Kurtisi
• [LEDE-DEV] [PATCH] scripts: fix build warning when overriding packages   Zefir Kurtisi
• [LEDE-DEV] [PATCH] procd: fix build when DEBUG is set   Zefir Kurtisi
• [LEDE-DEV] [PATCH] procd: fire events at instance respawn and failure   Zefir Kurtisi
• [LEDE-DEV] [PATCH v2] procd: fix build when DEBUG is set   Zefir Kurtisi
• [LEDE-DEV] replacing files in base system from a package?   Zefir Kurtisi
• [LEDE-DEV] Need help with package dependencies   Zefir Kurtisi
• [LEDE-DEV] Need help with package dependencies   Zefir Kurtisi
• [LEDE-DEV] replacing files in base system from a package?   Zefir Kurtisi
• [LEDE-DEV] replacing files in base system from a package?   Zefir Kurtisi
• [LEDE-DEV] [PATCH 1/2] generic: ar8216: fix ar8xxx_is_possible check   Christian Lamparter
• [LEDE-DEV] [PATCH 2/2] ar71xx: add support for the Airtight C-60   Christian Lamparter
• [LEDE-DEV] [PATCH] kernel: owl-loader: fix EEPROM size validation for 4KiB EEPROMs   Christian Lamparter
• [LEDE-DEV] [PATCH 1/2] generic: ar8216: fix ar8xxx_is_possible check   Christian Lamparter
• [LEDE-DEV] [PATCH v2 1/2] generic: ar8216: improve ar8xxx_is_possible check   Christian Lamparter
• [LEDE-DEV] [PATCH v2 2/2] ar71xx: add support for the Airtight C-60   Christian Lamparter
• [LEDE-DEV] [PATCH v3 1/2] generic: ar8216: improve ar8xxx_is_possible check   Christian Lamparter
• [LEDE-DEV] [PATCH v3 2/2] ar71xx: add support for the Airtight C-60   Christian Lamparter
• [LEDE-DEV] [PATCH v3.1] generic: ar8216: improve ar8xxx_is_possible check   Christian Lamparter
• [LEDE-DEV] [PATCH v1 1/2] base-files, mac80211, broadcom-wl: plug-and-play wifi detection   Christian Lamparter
• [LEDE-DEV] [PATCH v1 2/2] mac80211: remove ath10k delayed initialization hack   Christian Lamparter
• [LEDE-DEV] [PATCH] apm821xx: replace recovery image for the MBL with initramfs   Christian Lamparter
• [LEDE-DEV] [PATCH v1 1/2] base-files, mac80211, broadcom-wl: plug-and-play wifi detection   Christian Lamparter
• [LEDE-DEV] [PATCH v1 1/2] base-files, mac80211, broadcom-wl: plug-and-play wifi detection   Christian Lamparter
• [LEDE-DEV] [PATCH v1 1/2] base-files, mac80211, broadcom-wl: plug-and-play wifi detection   Christian Lamparter
• [LEDE-DEV] [PATCH v2 1/5] base-files: generate /etc/config/wireless, if it doesn't exist   Christian Lamparter
• [LEDE-DEV] [PATCH v2 2/5] mac80211: use uci to generate wireless config file   Christian Lamparter
• [LEDE-DEV] [PATCH v2 3/5] broadcom-wl: use uci to generate wireless config file   Christian Lamparter
• [LEDE-DEV] [PATCH v2 4/5] base-files, mac80211, broadcom-wl: plug-and-play wifi detection   Christian Lamparter
• [LEDE-DEV] [PATCH v2 5/5] mac80211: remove ath10k delayed initialization hack   Christian Lamparter
• [LEDE-DEV] [PATCH v2 4/5] base-files, mac80211, broadcom-wl: plug-and-play wifi detection   Christian Lamparter
• [LEDE-DEV] [PATCH v2 2/5] mac80211: use uci to generate wireless config file   Christian Lamparter
• [LEDE-DEV] [PATCH v3 1/4] base-files: generate /etc/config/wireless, if it doesn't exist   Christian Lamparter
• [LEDE-DEV] [PATCH v3 2/4] base-files, mac80211, broadcom-wl: use uci to populate wireless config   Christian Lamparter
• [LEDE-DEV] [PATCH v3 3/4] base-files, mac80211, broadcom-wl: wifi detection and configuration   Christian Lamparter
• [LEDE-DEV] [PATCH v3 4/4] mac80211: remove ath10k delayed initialization hack   Christian Lamparter
• [LEDE-DEV] [PATCH] docs: update uci's wireless reconfiguration text   Christian Lamparter
• [LEDE-DEV] [PATCH v3 1/4] base-files: generate /etc/config/wireless, if it doesn't exist   Christian Lamparter
• [LEDE-DEV] [PATCH v3 3/4] base-files, mac80211, broadcom-wl: wifi detection and configuration   Christian Lamparter
• [LEDE-DEV] [PATCH] apm821xx: fix USB LED trigger for WNDR4700   Christian Lamparter
• [LEDE-DEV] [RFC 4/6 v2] Generic: Crypto - aesni - add ccm(aes) algorithm implementation   Christian Lamparter
• [LEDE-DEV] [PATCH] apm821xx: fix USB LED trigger for WNDR4700   Christian Lamparter
• [LEDE-DEV] [PATCH V2] apm821xx: fix USB LED trigger for WNDR4700   Christian Lamparter
• [LEDE-DEV] [PATCH 3/3] lantiq: add device tree binding for dwc2 on danube   Christian Lamparter
• [LEDE-DEV] [PATCH 3/3] lantiq: add device tree binding for dwc2 on danube   Christian Lamparter
• [LEDE-DEV] [PATCH 3/3] lantiq: add device tree binding for dwc2 on danube   Christian Lamparter
• [LEDE-DEV] replacing files in base system from a package?   David Lang
• [LEDE-DEV] Actual community change and additional developers compared to OpenWrt   David Lang
• [LEDE-DEV] [PATCH] blobmsg_json: handle conversion of large integers from JSON   Florian Larysch
• [LEDE-DEV] [OpenWrt-Devel] [PATCH] blobmsg_json: handle conversion of large integers from JSON   Florian Larysch
• [LEDE-DEV] Bug#842710: [gcc-6] Fails to compile OpenWrt/LEDE prereq-build   Charlemagne Lasse
• [LEDE-DEV] Adding support for dlink dwr-512   Giuseppe Lippolis
• [LEDE-DEV] Adding support for dlink dwr-512   Giuseppe Lippolis
• [LEDE-DEV] Adding support for dlink dwr-512   Giuseppe Lippolis
• [LEDE-DEV] Adding support for dlink dwr-512   Giuseppe Lippolis
• [LEDE-DEV] Adding support for dlink dwr-512   Giuseppe Lippolis
• [LEDE-DEV] Adding support for dlink dwr-512   Giuseppe Lippolis
• [LEDE-DEV] Adding support for dlink dwr-512   Giuseppe Lippolis
• [LEDE-DEV] Adding support for dlink dwr-512   Giuseppe Lippolis
• [LEDE-DEV] Adding support for dlink dwr-512   Giuseppe Lippolis
• [LEDE-DEV] [RFC] dwr-512: Image Cracking   Giuseppe Lippolis
• [LEDE-DEV] [RFC] dwr-512: Image Cracking   Giuseppe Lippolis
• [LEDE-DEV] 3G support for dwr-512   Giuseppe Lippolis
• [LEDE-DEV] [RFC 0/1] x86: Add support for the PC Engines APU2 Board   Luiz Angelo Daros de Luca
• [LEDE-DEV] Lantiq XRX200, BtHomeHub5a unreliable NAND/UBIFS   Jonathan McHugh
• [LEDE-DEV] QCA Dakota support   Christian Mehlis
• [LEDE-DEV] [RFC] build: use CXXFLAGS if defined   Hauke Mehrtens
• [LEDE-DEV] o2 box 6431 / VGV7510KW22 - SIP with FXS/TAE Ports | owsip or alternative ?   Hauke Mehrtens
• [LEDE-DEV] o2 box 6431 / VGV7510KW22 - SIP with FXS/TAE Ports | owsip or alternative ?   Hauke Mehrtens
• [LEDE-DEV] o2 box 6431 / VGV7510KW22 - SIP with FXS/TAE Ports | owsip or alternative ?   Hauke Mehrtens
• [LEDE-DEV] [PATCH V2 2/3] switch to the new usbport LED trigger   Rafal Milecki
• [LEDE-DEV] Default kernel config and CONFIG_LEDS_TRIGGER_*   Rafał Miłecki
• [LEDE-DEV] [PATCH 1/2] kernel: add package for usbport LED trigger   Rafał Miłecki
• [LEDE-DEV] [PATCH 2/2] base-files: support usbport LED trigger   Rafał Miłecki
• [LEDE-DEV] New device: Two USB ports, only one USB activity LED   Rafał Miłecki
• [LEDE-DEV] replacing files in base system from a package?   Rafał Miłecki
• [LEDE-DEV] Support for KEY_BRIGHTNESS_ZERO   Rafał Miłecki
• [LEDE-DEV] Support for KEY_BRIGHTNESS_ZERO   Rafał Miłecki
• [LEDE-DEV] [PATCH] ramips: add support for Planex VR500.   Rafał Miłecki
• [LEDE-DEV] [PATCH V2 1/3] kernel: add package for usbport LED trigger   Rafał Miłecki
• [LEDE-DEV] [PATCH V2 2/3] switch to the new usbport LED trigger   Rafał Miłecki
• [LEDE-DEV] [PATCH V2 3/3] kernel: drop usbdev LED trigger   Rafał Miłecki
• [LEDE-DEV] [PATCH V2 2/3] switch to the new usbport LED trigger   Rafał Miłecki
• [LEDE-DEV] Reproducible builds & feeds   Rafał Miłecki
• [LEDE-DEV] [PATCH] Add support for Comfast E380AC v1 and v2   Rafał Miłecki
• [LEDE-DEV] [PATCH V2 2/3] switch to the new usbport LED trigger   Rafał Miłecki
• [LEDE-DEV] [PATCH V2 3/3] kernel: drop usbdev LED trigger   Rafał Miłecki
• [LEDE-DEV] [PATCH] base-files: add ucidef_set_led_usbport for full usbport support   Rafał Miłecki
• [LEDE-DEV] [PATCH] base-files: ensure reset only works if an overlay exists   Rafał Miłecki
• [LEDE-DEV] [PATCH 1/1] package/utils: Add beep package   Rafał Miłecki
• [LEDE-DEV] [PATCH v2] base-files: ensure reset only works if an overlay exists   Rafał Miłecki
• [LEDE-DEV] [PATCH] brcm47xx: open code Makefile entries for all devices   Rafał Miłecki
• [LEDE-DEV] [PATCH v2] base-files: ensure reset only works if an overlay exists   Rafał Miłecki
• [LEDE-DEV] [PATCH v2] base-files: ensure reset only works if an overlay exists   Rafał Miłecki
• [LEDE-DEV] [PATCH v2] base-files: ensure reset only works if an overlay exists   Rafał Miłecki
• [LEDE-DEV] [PATCH] apm821xx: fix USB LED trigger for WNDR4700   Rafał Miłecki
• [LEDE-DEV] [RFC] brcm47xx: bump kernel to 4.4   Rafał Miłecki
• [LEDE-DEV] [PATCH] brcm47xx: open code Makefile entries for all devices   Rafał Miłecki
• [LEDE-DEV] [RFC] brcm47xx: bump kernel to 4.4   Rafał Miłecki
• [LEDE-DEV] [PATCH] brcm47xx: add support for per-device rootfs   Rafał Miłecki
• [LEDE-DEV] [PATCH RFC] kernel: allow selecting kmod-ssb on TARGET_brcm47xx_mips74k   Rafał Miłecki
• [LEDE-DEV] [RFC] brcm47xx: bump kernel to 4.4   Rafał Miłecki
• [LEDE-DEV] make -j 4: race between Image/Prepare and device images?   Rafał Miłecki
• [LEDE-DEV] [RFC] brcm47xx: bump kernel to 4.4   Rafał Miłecki
• [LEDE-DEV] [RFC] brcm47xx: bump kernel to 4.4   Rafał Miłecki
• [LEDE-DEV] [RFC] brcm47xx: bump kernel to 4.4   Rafał Miłecki
• [LEDE-DEV] [PATCH packages] lighttpd: update to 1.4.42   Rafał Miłecki
• [LEDE-DEV] [PATCH V2 0/7] add support for D-Link DAP-2695 rev. A1   Rafał Miłecki
• [LEDE-DEV] [PATCH] apm821xx: fix USB LED trigger for WNDR4700   Rafał Miłecki
• [LEDE-DEV] [PATCH V2] apm821xx: fix USB LED trigger for WNDR4700   Rafał Miłecki
• [LEDE-DEV] [PATCH V2] apm821xx: fix USB LED trigger for WNDR4700   Rafał Miłecki
• [LEDE-DEV] [PATCHv2] ipq806x: add support for ZyXEL NBG6817   J Mo
• [LEDE-DEV] [PATCHv2] ipq806x: add support for ZyXEL NBG6817   J Mo
• [LEDE-DEV] Stability & release plans -- CVE-2016-5195   J Mo
• [LEDE-DEV] [PATCH] LuaSrcDiet call define for lua code Minifying   Sebastian Moeller
• [LEDE-DEV] [PATCH v3 04/13] scripts: $/${} is unnecessary on arithmetic variables   Sebastian Moeller
• [LEDE-DEV] [PATCH v3 04/13] scripts: $/${} is unnecessary on arithmetic variables   Sebastian Moeller
• [LEDE-DEV] 3G support for dwr-512   Bjørn Mork
• [LEDE-DEV] [PATCH 0/3] lantiq: enable dwc2 usb driver for danube   Ben Mulvihill
• [LEDE-DEV] [PATCH 1/3] lantiq: initialise dwc2 on danube   Ben Mulvihill
• [LEDE-DEV] [PATCH 3/3] lantiq: add device tree binding for dwc2 on danube   Ben Mulvihill
• [LEDE-DEV] [PATCH 2/3] lantiq: enable dwc2 in danube dtsi   Ben Mulvihill
• [LEDE-DEV] [PATCH 3/3] lantiq: add device tree binding for dwc2 on danube   Ben Mulvihill
• [LEDE-DEV] [PATCH 3/3] lantiq: add device tree binding for dwc2 on danube   Ben Mulvihill
• [LEDE-DEV] [PATCH 3/3] lantiq: add device tree binding for dwc2 on danube   Ben Mulvihill
• [LEDE-DEV] [PATCH 3/3] lantiq: add device tree binding for dwc2 on danube   Ben Mulvihill
• [LEDE-DEV] [PATCH 3/3] lantiq: add device tree binding for dwc2 on danube   Ben Mulvihill
• [LEDE-DEV] [PATCH 3/3] lantiq: add device tree binding for dwc2 on danube   Ben Mulvihill
• [LEDE-DEV] [PATCH 3/3] lantiq: add device tree binding for dwc2 on danube   Ben Mulvihill
• [LEDE-DEV] [PATCH] uboot-ar71xx: make reproducible   Dirk Neukirchen
• [LEDE-DEV] gettext-full: update to 0.19.8.1   Dirk Neukirchen
• [LEDE-DEV] [PATCH 1/3] gettext: fix whitespace   Dirk Neukirchen
• [LEDE-DEV] [PATCH 2/3] autotools: use correct version for gettext FIXUP   Dirk Neukirchen
• [LEDE-DEV] [PATCH 3/3] gettext-full: update to 0.19.8.1   Dirk Neukirchen
• [LEDE-DEV] [RFC] brcm47xx: bump kernel to 4.4   Hannu Nyman
• [LEDE-DEV] Call defines for minifying scripting languages   Karl Palsson
• [LEDE-DEV] replacing files in base system from a package?   Karl Palsson
• [LEDE-DEV] replacing files in base system from a package?   Karl Palsson
• [LEDE-DEV] Call defines for minifying scripting languages   Karl Palsson
• [LEDE-DEV] PROVIDES dependency issue   Karl Palsson
• [LEDE-DEV] [PATCH] ar71xx: move dragino2 from legacy to generic   Karl Palsson
• [LEDE-DEV] per device rootfs vs multiple devices   Karl Palsson
• [LEDE-DEV] Support for KEY_BRIGHTNESS_ZERO   Karl Palsson
• [LEDE-DEV] per device rootfs vs multiple devices   Karl Palsson
• [LEDE-DEV] [PATCH] scripts: add help text for some generated KConfigs   Karl Palsson
• [LEDE-DEV] [PATCH] scripts: case insensitive sort device names   Karl Palsson
• [LEDE-DEV] replacing files in base system from a package?   Karl Palsson
• [LEDE-DEV] Out of tree builds   Karl Palsson
• [LEDE-DEV] package contribution guidelines   Karl Palsson
• [LEDE-DEV] [PATCH] base-files: ensure reset only works if an overlay exists   Karl Palsson
• [LEDE-DEV] [PATCH v2] base-files: ensure reset only works if an overlay exists   Karl Palsson
• [LEDE-DEV] [PATCH] dnsmasq: support log-dhcp option   Karl Palsson
• [LEDE-DEV] [PATCH] Add support for Comfast E380AC v1 and v2   Gareth Parker
• [LEDE-DEV] [PATCH] Add support for Comfast E380AC v1 and v2   Gareth Parker
• [LEDE-DEV] [PATCH] Add support for Comfast E380AC v1 and v2   Gareth Parker
• [LEDE-DEV] Ubnt power beam board - back to defaults after reboot   Gareth Parker
• [LEDE-DEV] [PATCH] Add support for Comfast E380AC v1 and v2   Gareth Parker
• [LEDE-DEV] VRV9510KWAC23   Sylwek Petela
• [LEDE-DEV] Build ar71xx / 4MB with IPv6, Luci, OpenVPN (PolarSSL), Command, Watchcat, relay and printk without debug ?   Daniel Petre
• [LEDE-DEV] lua: update package?   W. Michael Petullo
• [LEDE-DEV] issue with rt61-pci   Eddi De Pieri
• [LEDE-DEV] bcm63xx and fxs is possible...   Eddi De Pieri
• [LEDE-DEV] o2 box 6431 / VGV7510KW22 - SIP with FXS/TAE Ports | owsip or alternative ?   Eddi De Pieri
• [LEDE-DEV] o2 box 6431 / VGV7510KW22 - SIP with FXS/TAE Ports | owsip or alternative ?   Eddi De Pieri
• [LEDE-DEV] Ubnt power beam board - back to defaults after reboot   Jiri Pirko
• [LEDE-DEV] Ubnt power beam board - back to defaults after reboot   Jiri Pirko
• [LEDE-DEV] VRV9510KWAC23   Juan Rios
• [LEDE-DEV] VRV9510KWAC23   Juan Rios
• [LEDE-DEV] Arcadyan vrv9510kwac23   Juan Rios
• [LEDE-DEV] Arcadyan vrv9510kwac23   Juan Rios
• [LEDE-DEV] [PATCH] iwinfo: add device id for Ubiquiti NanoStation Loco M2   Sven Roederer
• [LEDE-DEV] LEDE Forum - Startup mode   Vincenzo Romano
• [LEDE-DEV] [PATCH v1 1/2] base-files, mac80211, broadcom-wl: plug-and-play wifi detection   Matthias Schiffer
• [LEDE-DEV] [PATCH v1 1/2] base-files, mac80211, broadcom-wl: plug-and-play wifi detection   Matthias Schiffer
• [LEDE-DEV] [PATCH v1 1/2] base-files, mac80211, broadcom-wl: plug-and-play wifi detection   Matthias Schiffer
• [LEDE-DEV] per device rootfs vs multiple devices   Matthias Schiffer
• [LEDE-DEV] [PATCH v2 2/5] mac80211: use uci to generate wireless config file   Matthias Schiffer
• [LEDE-DEV] can't install luci   Matthias Schiffer
• [LEDE-DEV] can't install luci   Matthias Schiffer
• [LEDE-DEV] can't install luci   Matthias Schiffer
• [LEDE-DEV] can't install luci   Matthias Schiffer
• [LEDE-DEV] Ubnt power beam board - back to defaults after reboot   Matthias Schiffer
• [LEDE-DEV] Speedport W504V | ARV8539PW22 - How to Configure vDSL2 with VLANID ?   Dennis Schneck
• [LEDE-DEV] Speedport W504V | ARV8539PW22 - gets very hot !   Dennis Schneck
• [LEDE-DEV] Speedport W504V | ARV8539PW22 - gets very hot !   Dennis Schneck
• [LEDE-DEV] Speedport W504V | ARV8539PW22 - gets very hot !   Dennis Schneck
• [LEDE-DEV] sysupgrade with URL did not work   Dennis Schneck
• [LEDE-DEV] Call defines for minifying scripting languages   Christian Schoenebeck
• [LEDE-DEV] linux-x86_generic/linux-4.4.26 compile errors   Christian Schoenebeck
• [LEDE-DEV] linux-x86_generic/linux-4.4.26 compile errors   Christian Schoenebeck
• [LEDE-DEV] [PATCH 1/1] usign: main.c: describe necessary arguments for -G   Heinrich Schuchardt
• [LEDE-DEV] [PATCH 1/1] README: provide reference for ed25519 algorithm   Heinrich Schuchardt
• [LEDE-DEV] [PATCH 1/1 v2] usign: README: provide reference for ed25519 algorithm   Heinrich Schuchardt
• [LEDE-DEV] Signed tags missing in Git repositories   Heinrich Schuchardt
• [LEDE-DEV] [PATCH 1/1] usign: README: replace unicode character   Heinrich Schuchardt
• [LEDE-DEV] OpenWrt Summit Live Streaming   Eric Schultz
• [LEDE-DEV] [PATCH] ramips: add usb packages into DIR-860L B1 profile   Stijn Segers
• [LEDE-DEV] replacing files in base system from a package?   Russell Senior
• [LEDE-DEV] [PATCH 3/3] lantiq: add device tree binding for dwc2 on danube   Antti Seppälä
• [LEDE-DEV] [PATCH 3/3] lantiq: add device tree binding for dwc2 on danube   Antti Seppälä
• [LEDE-DEV] [PATCH 3/3] lantiq: add device tree binding for dwc2 on danube   Antti Seppälä
• [LEDE-DEV] [PATCH 3/3] lantiq: add device tree binding for dwc2 on danube   Antti Seppälä
• [LEDE-DEV] [BUG] Kernel crashes with ath10k radio and Nexus 5X clients   Timo Sigurdsson
• [LEDE-DEV] [BUG] Kernel crashes with ath10k radio and Nexus 5X clients   Timo Sigurdsson
• [LEDE-DEV] [RFC 0/1] x86: Add support for the PC Engines APU2 Board   Dave Taht
• [LEDE-DEV] [RFC 0/1] x86: Add support for the PC Engines APU2 Board   Dave Taht
• [LEDE-DEV] [RFC 0/1] x86: Add support for the PC Engines APU2 Board   Dave Taht
• [LEDE-DEV] [RFC 0/6 v2] Add the PC Engines APU2 to LEDE   Dave Taht
• [LEDE-DEV] [RFC 0/1] x86: Add support for the PC Engines APU2 Board   Dave Taht
• [LEDE-DEV] [PATCH 5/5] ar71xx: add support for D-Link DAP-2695 rev. A1   Stijn Tintel
• [LEDE-DEV] [RFC 1/1] x86: Add support for the PC Engines APU2 Board   Stijn Tintel
• [LEDE-DEV] [PATCH V2 0/7] add support for D-Link DAP-2695 rev. A1   Stijn Tintel
• [LEDE-DEV] [PATCH V2 1/7] firmware-utils: mkwrggimg: new tool for D-Link DAP-2695   Stijn Tintel
• [LEDE-DEV] [PATCH V2 2/7] kernel: mtdsplit: add support for WRGG images   Stijn Tintel
• [LEDE-DEV] [PATCH V2 3/7] mtd: fix endianness detection on musl   Stijn Tintel
• [LEDE-DEV] [PATCH V2 4/7] mtd: add fixwrgg command   Stijn Tintel
• [LEDE-DEV] [PATCH V2 5/7] ar71xx/base-files: rename 09_fix-trx-header 09_fix-checksum   Stijn Tintel
• [LEDE-DEV] [PATCH V2 6/7] ar71xx: build relocate stub for generic and legacy images   Stijn Tintel
• [LEDE-DEV] [PATCH V2 7/7] ar71xx: add support for D-Link DAP-2695 rev. A1   Stijn Tintel
• [LEDE-DEV] [PATCH V2 0/7] add support for D-Link DAP-2695 rev. A1   Stijn Tintel
• [LEDE-DEV] DirtyCOW backport   Stijn Tintel
• [LEDE-DEV] DirtyCOW backport   Stijn Tintel
• [LEDE-DEV] [LEDE DEV][wiki] Login with github   Martin Tippmann
• [LEDE-DEV] extend support from Ubiquiti EdgeRouter X (UBNT-ERX) --> UBNT-ERX-SFP   Peter Trollope
• [LEDE-DEV] [RFC] [PATCH] ipq806x: add support for ZyXEL NBG6817   Andre Valentin
• [LEDE-DEV] [RFC] dwr-512: Image Cracking   Andre Valentin
• [LEDE-DEV] [PATCHv2] ipq806x: add support for ZyXEL NBG6817   Andre Valentin
• [LEDE-DEV] [PATCHv2] ipq806x: add support for ZyXEL NBG6817   Andre Valentin
• [LEDE-DEV] [PATCHv2] ipq806x: add support for ZyXEL NBG6817   Andre Valentin
• [LEDE-DEV] [PATCHv2] ipq806x: add support for ZyXEL NBG6817   Andre Valentin
• [LEDE-DEV] [PATCHv2] ipq806x: add support for ZyXEL NBG6817   Andre Valentin
• [LEDE-DEV] [PATCH] ipq806x: add support for ZyXEL NBG6817   André Valentin
• [LEDE-DEV] [PATCHv2] ipq806x: add support for ZyXEL NBG6817   André Valentin
• [LEDE-DEV] [PATCHv2] ipq806x: add support for ZyXEL NBG6817   André Valentin
• [LEDE-DEV] [PATCHv2] ipq806x: add support for ZyXEL NBG6817   André Valentin
• [LEDE-DEV] [PATCH v3 0/5] ipq806x/nbg6817: add support for ZyXEL NBG6817   André Valentin
• [LEDE-DEV] [PATCH v3 1/5] ipq806x/nbg6817: add support for ZyXEL NBG6817   André Valentin
• [LEDE-DEV] [PATCH v3 2/5] linux/mtd: add id for mx25u3235f needed by ZyXEL NBG6817   André Valentin
• [LEDE-DEV] [PATCH v3 3/5] ipq806x/nbg6817: add sysupgrade support   André Valentin
• [LEDE-DEV] [PATCH v3 4/5] package/basefiles: add mkfs.ext4 and losetup binaries to ramfs list   André Valentin
• [LEDE-DEV] [PATCH v3 5/5] package/uboot-envtools: Add support for ZyXEL NBG6817   André Valentin
• [LEDE-DEV] [PATCH v3 1/5] ipq806x/nbg6817: add support for ZyXEL NBG6817   André Valentin
• [LEDE-DEV] [PATCH v3 3/5] ipq806x/nbg6817: add sysupgrade support   André Valentin
• [LEDE-DEV] [PATCH v3 3/5] ipq806x/nbg6817: add sysupgrade support   André Valentin
• [LEDE-DEV] [PATCH v4 0/5] ipq806x: add support for ZyXEL NBG6817   André Valentin
• [LEDE-DEV] [PATCH v4 1/5] ipq806x/nbg6817: add support for ZyXEL NBG6817   André Valentin
• [LEDE-DEV] [PATCH v4 2/5] linux/mtd: add id for mx25u3235f needed by ZyXEL NBG6817   André Valentin
• [LEDE-DEV] [PATCH v4 3/5] ipq806x/nbg6817: add sysupgrade support   André Valentin
• [LEDE-DEV] [PATCH v4 4/5] package/basefiles: add mkfs.ext4 and losetup binaries to ramfs list   André Valentin
• [LEDE-DEV] [PATCH v4 5/5] package/uboot-envtools: Add support for ZyXEL NBG6817   André Valentin
• [LEDE-DEV] [PATCH v4 2/5] linux/mtd: add id for mx25u3235f needed by ZyXEL NBG6817   André Valentin
• [LEDE-DEV] [PATCH v2] base-files: also generate configs when current is empty (FS#193)   Koen Vandeputte
• [LEDE-DEV] base-files: also generate configs when current is empty (FS#193)   Koen Vandeputte
• [LEDE-DEV] replacing files in base system from a package?   Koen Vandeputte
• [LEDE-DEV] [PATCH] kernel: update kernel 4.4 to version 4.4.25   Koen Vandeputte
• [LEDE-DEV] [PATCH] kernel: update kernel 4.4 to version 4.4.26   Koen Vandeputte
• [LEDE-DEV] [PATCH] imx6: Add ds1672 RTC to kernel for working hctosys (Gateworks)   Koen Vandeputte
• [LEDE-DEV] [PATCH] kernel: update kernel 4.4 to version 4.4.28   Koen Vandeputte
• [LEDE-DEV] [PATCH] tools: bump qemu to 2.7.0   Ulrich Weber
• [LEDE-DEV] [PATCH] tools: bump qemu to 2.7.0   Ulrich Weber
• [LEDE-DEV] Adding support for rtl8812AU/rtl8814AU   Weedy
• [LEDE-DEV] [PATCH v3 04/13] scripts: $/${} is unnecessary on arithmetic variables   Jo-Philipp Wich
• [LEDE-DEV] [PATCH v1 1/2] base-files, mac80211, broadcom-wl: plug-and-play wifi detection   Jo-Philipp Wich
• [LEDE-DEV] [RFC] Fix and improve PROVIDES handling   Jo-Philipp Wich
• [LEDE-DEV] [PATCH 1/5] scripts/package-metadata.pl: fix handling of virtual (PROVIDES) depends   Jo-Philipp Wich
• [LEDE-DEV] [PATCH 2/5] scripts/package-metadata.pl: split variants into -y and -m lists   Jo-Philipp Wich
• [LEDE-DEV] [PATCH 3/5] build: only consider <*> package variants for opkg install   Jo-Philipp Wich
• [LEDE-DEV] [PATCH 4/5] iproute2: let both ip and ip-full provide the virtual ip-command package   Jo-Philipp Wich
• [LEDE-DEV] [PATCH 5/5] openvpn: depend on virtual "ip-command"   Jo-Philipp Wich
• [LEDE-DEV] [PATCH] iwinfo: add device id for Ubiquiti NanoStation Loco M2   Jo-Philipp Wich
• [LEDE-DEV] replacing files in base system from a package?   Jo-Philipp Wich
• [LEDE-DEV] [RFC 0/3] Proposal to change to default tagged switch configurations   Jo-Philipp Wich
• [LEDE-DEV] [RFC 1/3] base-files: uci-defaults: support requesting untagged switch port configuration   Jo-Philipp Wich
• [LEDE-DEV] [RFC 2/3] brcm63xx: board.d: request untagged switch config where applicable   Jo-Philipp Wich
• [LEDE-DEV] [RFC 3/3] base-files: emit tagged switch configuration by default   Jo-Philipp Wich
• [LEDE-DEV] [RFC 1/3] include: image.mk: make certain ext4 parameters optional   Jo-Philipp Wich
• [LEDE-DEV] [RFC 2/3] config: ext4: do not set a maximum inode number by default   Jo-Philipp Wich
• [LEDE-DEV] [RFC 3/3] config: ext4: use 1K blocks by default to support online resize2fs   Jo-Philipp Wich
• [LEDE-DEV] [RFC 3/3] config: ext4: use 1K blocks by default to support online resize2fs   Jo-Philipp Wich
• [LEDE-DEV] Actual community change and additional developers compared to OpenWrt   Jo-Philipp Wich
• [LEDE-DEV] Actual community change and additional developers compared to OpenWrt   Jo-Philipp Wich
• [LEDE-DEV] Stability & release plans   Jo-Philipp Wich
• [LEDE-DEV] [RFC] brcm47xx: bump kernel to 4.4   Jo-Philipp Wich
• [LEDE-DEV] [RFCv2 0/3] Fix and improve PROVIDES handling   Jo-Philipp Wich
• [LEDE-DEV] [RFCv2 1/3] scripts/package-metadata.pl: fix handling of virtual (PROVIDES) depends   Jo-Philipp Wich
• [LEDE-DEV] [RFCv2 2/3] include: properly update .install stamp files   Jo-Philipp Wich
• [LEDE-DEV] [RFCv2 3/3] iproute2: rename ip to ip-tiny and let both ip-tiny and ip-full provide "ip"   Jo-Philipp Wich
• [LEDE-DEV] [RFC v2] Adjusting ext4 filesystem defaults   Jo-Philipp Wich
• [LEDE-DEV] [RFC v2 1/3] include: image.mk: make ext4 reserved blocks percentage optional   Jo-Philipp Wich
• [LEDE-DEV] [RFC v2 2/3] config: ext4: drop option to set maximum number of inodes   Jo-Philipp Wich
• [LEDE-DEV] [RFC v2 3/3] config: ext4: increase x86 rootfs size to 2GB to support online resize2fs   Jo-Philipp Wich
• [LEDE-DEV] [RFC v2 1/3] include: image.mk: make ext4 reserved blocks percentage optional   Jo-Philipp Wich
• [LEDE-DEV] replacing files in base system from a package?   Jo-Philipp Wich
• [LEDE-DEV] buildroot broken on debian jessie   Jo-Philipp Wich
• [LEDE-DEV] buildroot broken on debian jessie   Jo-Philipp Wich
• [LEDE-DEV] Stability & release plans   Jo-Philipp Wich
• [LEDE-DEV] buildroot broken on debian jessie   Jo-Philipp Wich
• [LEDE-DEV] [BUG] Kernel crashes with ath10k radio and Nexus 5X clients   Jo-Philipp Wich
• [LEDE-DEV] [BUG] Kernel crashes with ath10k radio and Nexus 5X clients   Jo-Philipp Wich
• [LEDE-DEV] [PATCH v3] base-files: sysfixtime: Keep RTC time in UTC timezone   Jo-Philipp Wich
• [LEDE-DEV] [PATCH] OLIMEX A13-SOM does not boot on latest lede source   Jo-Philipp Wich
• [LEDE-DEV] [RFC] mvebu: simplify etc/board.d/02_network   Syrone Wong
• [LEDE-DEV] [RFC] mvebu: simplify etc/board.d/02_network   Syrone Wong
• [LEDE-DEV] [PATCH] kernel: update kernel 4.4 to version 4.4.28   Syrone Wong
• [LEDE-DEV] [PATCH] kernel: update kernel 4.4 to version 4.4.29   Syrone Wong
• [LEDE-DEV] [PATCH] ltq-ptm: Support 1508-byte MTU for RFC4638   David Woodhouse
• [LEDE-DEV] Out of tree builds   David Woodhouse
• [LEDE-DEV] [RFC 1/1] x86: Add support for the PC Engines APU2 Board   David Woodhouse
• [LEDE-DEV] ramips: MT7621 Ethernet IRQ Balancing   Andrew Yong
• [LEDE-DEV] [PATCH] ramips: add support for Planex VR500.   YuheiOKAWA
• [LEDE-DEV] [PATCH] x86: 64: enable pci hotplug and acpipnp   Yousong Zhou
• [LEDE-DEV] Dependency issues on custom packages and USE_MUSL visibility   Yousong Zhou
• [LEDE-DEV] [RFC] mvebu: simplify etc/board.d/02_network   Yousong Zhou
• [LEDE-DEV] [PATCH] ath10k-ct: Update to latest 4.7 CT ath10k driver.   greearb at candelatech.com
• [LEDE-DEV] [PATCH] Latest ath10k CT 988X firmware (beta-18).   greearb at candelatech.com
• [LEDE-DEV] [PATCH] ath10k-ct: Add QCA9888/9886 support, fix compat issue.   greearb at candelatech.com
• [LEDE-DEV] [PATCH] kirkwood: disable fault LEDs by default   p.wassi at gmx.at
• [LEDE-DEV] [RFC] brcm47xx: bump kernel to 4.4   p.wassi at gmx.at
• [LEDE-DEV] [PATCH] kirkwood: disable fault LEDs by default   p.wassi at gmx.at
• [LEDE-DEV] [PATCH] kirkwood: remove redundant code in etc/board.d/02_network   p.wassi at gmx.at
• [LEDE-DEV] [PATCH] kirkwood: Add RTC driver to kernel for working hctosys   p.wassi at gmx.at
• [LEDE-DEV] [PATCH] package/system/mtd: fix usage message   p.wassi at gmx.at
• [LEDE-DEV] [PATCH, v2] kirkwood: remove redundant code in etc/board.d/02_network   p.wassi at gmx.at
• [LEDE-DEV] [PATCH, v2] package/system/mtd: fix usage message   p.wassi at gmx.at
• [LEDE-DEV] [RFC] brcm47xx: bump kernel to 4.4   p.wassi at gmx.at
• [LEDE-DEV] [RFC] brcm47xx: bump kernel to 4.4   p.wassi at gmx.at
• [LEDE-DEV] [PATCH] package/boot/uboot-kirkwood: bump to upstream 2016.09.01   p.wassi at gmx.at
• [LEDE-DEV] [PATCH] package/boot/uboot-kirkwood: fix default bootcmd for Seagate Dockstar   p.wassi at gmx.at
• [LEDE-DEV] [RFC] brcm47xx: bump kernel to 4.4   p.wassi at gmx.at
• [LEDE-DEV] [PATCH] kirkwood: fix pogo_e02 LED name   p.wassi at gmx.at
• [LEDE-DEV] [RFC] brcm47xx: bump kernel to 4.4   p.wassi at gmx.at
• [LEDE-DEV] [PATCH, v2] package/boot/uboot-kirkwood: bump to upstream 2016.09.01   p.wassi at gmx.at
• [LEDE-DEV] OpenVPN capath + cafile uci options   p.wassi at gmx.at
• [LEDE-DEV] [RFC] mvebu: simplify etc/board.d/02_network   p.wassi at gmx.at
• [LEDE-DEV] [PATCH] package net/cifs-utils: missing dependency?   p.wassi at gmx.at
• [LEDE-DEV] [RFC] mvebu: simplify etc/board.d/02_network   p.wassi at gmx.at
• [LEDE-DEV] [RFC] mvebu: simplify etc/board.d/02_network   p.wassi at gmx.at
• [LEDE-DEV] [PATCH] kernel: update kernel 4.4 to version 4.4.28   p.wassi at gmx.at
• [LEDE-DEV] [PATCH] kernel: update kernel 4.4 to version 4.4.29   p.wassi at gmx.at
• [LEDE-DEV] [RFC] mvebu: simplify etc/board.d/02_network   p.wassi at gmx.at
• [LEDE-DEV] [PATCH] Add support for TP-Link WR802N v1   julius+lede at inet.tu-berlin.de
• [LEDE-DEV] [PATCH v4] base-files: Ensure reset only works if an overlay exists   edgar.soldin at web.de
• [LEDE-DEV] [PATCH v4] base-files: Ensure reset only works if an overlay exists   edgar.soldin at web.de
• [LEDE-DEV] Actual community change and additional developers compared to OpenWrt   edgar.soldin at web.de
• [LEDE-DEV] How to set wifi to 11n mode only with ar71xx device ?   xinglp
• [LEDE-DEV] Stability & release plans   yanosz
• [LEDE-DEV] Stability & release plans   yanosz
• [LEDE-DEV] Stability & release plans -- CVE-2016-5195   yanosz
• [LEDE-DEV] [PATCH] imx6: inittab: Use login.sh wrapper so we can configure console password   Petr Štetiar
• [LEDE-DEV] [PATCH] base-files: sysfixtime: Allow system time in local timezones   Petr Štetiar
• [LEDE-DEV] [PATCH] imx6: Add ds1307 RTC to kernel for working hctosys   Petr Štetiar
• [LEDE-DEV] [PATCH] base-files: sysfixtime: Allow system time in local timezones   Petr Štetiar
• [LEDE-DEV] [PATCH] base-files: sysfixtime: Allow system time in local timezones   Petr Štetiar
• [LEDE-DEV] uqmi: re-enable autoconnect which was dropped without explanation   Petr Štetiar
• [LEDE-DEV] [PATCH] base-files: sysfixtime: Allow system time in local timezones   Petr Štetiar
• [LEDE-DEV] [PATCH] base-files: sysfixtime: Allow system time in local timezones   Petr Štetiar
• [LEDE-DEV] uqmi: re-enable autoconnect which was dropped without explanation   Petr Štetiar
• [LEDE-DEV] [PATCH v2] base-files: sysfixtime: Keep RTC time in UTC by default   Petr Štetiar
• [LEDE-DEV] [PATCH v3] base-files: sysfixtime: Keep RTC time in UTC timezone   Petr Štetiar
• [LEDE-DEV] [PATCH] ramips: add support for Planex VR500.   ＠SRCHACK.ORG

Last message date: Mon Oct 31 23:30:05 PDT 2016
Archived on: Mon Jan 2 02:11:57 PST 2017

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...