December 2015 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Tue Dec 1 13:00:42 PST 2015
Ending: Thu Dec 31 08:21:07 PST 2015
Messages: 214

• [PATCH 2/3] ARM: bcm2835: add rpi power domain driver   Alexander Aring
  • [PATCH 2/3] ARM: bcm2835: add rpi power domain driver   Kevin Hilman
    • [PATCH 2/3] ARM: bcm2835: add rpi power domain driver   Alexander Aring
• [PATCH 1/3] spi: added spi_resource management   Mark Brown
  • [PATCH 1/3] spi: added spi_resource management   Martin Sperl
    • [PATCH 1/3] spi: added spi_resource management   Mark Brown
      • [PATCH 1/3] spi: added spi_resource management   Martin Sperl
      • [PATCH 1/3] spi: added spi_resource management   Mark Brown
      • [PATCH 1/3] spi: added spi_resource management   Martin Sperl
• [PATCH 2/3] spi: add initial set of spi_transfer transformation methods   Mark Brown
  • [PATCH 2/3] spi: add initial set of spi_transfer transformation methods   Martin Sperl
    • [PATCH 2/3] spi: add initial set of spi_transfer transformation methods   Mark Brown
      • [PATCH 2/3] spi: add initial set of spi_transfer transformation methods   Martin Sperl
      • [PATCH 2/3] spi: add initial set of spi_transfer transformation methods   Mark Brown
      • [PATCH 2/3] spi: add initial set of spi_transfer transformation methods   Martin Sperl
      • [PATCH 2/3] spi: add initial set of spi_transfer transformation methods   Mark Brown
• [PATCH 0/3] pwm: bcm2835: improve clock handling   Stefan Wahren
  • [PATCH 1/3] pwm: bcm2835: calculate scaler in pwm_config   Stefan Wahren
  • [PATCH 3/3] pwm: bcm2835: fix email address specifiction   Stefan Wahren
  • [PATCH 0/3] pwm: bcm2835: improve clock handling   Stefan Wahren
    • [PATCH 0/3] pwm: bcm2835: improve clock handling   Eric Anholt
  • [PATCH 0/3] pwm: bcm2835: improve clock handling   Thierry Reding
• [PATCH 2/3] pwm: bcm2835: prevent division by zero   Stefan Wahren
  • [PATCH 2/3] pwm: bcm2835: prevent division by zero   Eric Anholt
    • [PATCH 2/3] pwm: bcm2835: prevent division by zero   Stefan Wahren
      • [PATCH 2/3] pwm: bcm2835: prevent division by zero   Eric Anholt
  • [PATCH 2/3] pwm: bcm2835: prevent division by zero   Mathieu Poirier
    • [PATCH 2/3] pwm: bcm2835: prevent division by zero   Eric Anholt
• [PATCH RFC 4/4] ARM: bcm2835: assign pins to sdhci pinctrl   Eric Anholt
• [PATCH RFC 1/4] ARM: bcm2835: remove sdhci pins from GPIO pinctrl   Stephen Warren
  • [PATCH RFC 1/4] ARM: bcm2835: remove sdhci pins from GPIO pinctrl   Stefan Wahren
    • [PATCH RFC 1/4] ARM: bcm2835: remove sdhci pins from GPIO pinctrl   Stephen Warren
• [PATCH RFC 2/4] ARM: bcm2835: rename sdhci pin group   Stephen Warren
  • [PATCH RFC 2/4] ARM: bcm2835: rename sdhci pin group   Stefan Wahren
    • [PATCH RFC 2/4] ARM: bcm2835: rename sdhci pin group   Stephen Warren
• [PATCH RFC 3/4] ARM: bcm2835: specify card detect pin for RPi B   Stephen Warren
  • [PATCH RFC 3/4] ARM: bcm2835: specify card detect pin for RPi B   Stefan Wahren
• bcm2835_gpio_direction_output not setting up GPIO value   Stephen Warren
• [PATCH] pinctrl: bcm2835: Fix initial value for direction_output   Stephen Warren
  • [PATCH] pinctrl: bcm2835: Fix initial value for direction_output   Stefan Wahren
    • [PATCH] pinctrl: bcm2835: Fix initial value for direction_output   Linus Walleij
  • [PATCH] pinctrl: bcm2835: Fix initial value for direction_output   Linus Walleij
• [PATCH V3 RFT] ARM: bcm2835: enable all bcm2835-relevant in defconfig   Stephen Warren
  • [PATCH V3 RFT] ARM: bcm2835: enable all bcm2835-relevant in defconfig   Eric Anholt
• [PATCH v2 1/3] clk: bcm2835: Always round up clock divisor   Remi Pommarel
  • [PATCH v2 1/3] clk: bcm2835: Always round up clock divisor   Eric Anholt
• [PATCH v2 2/3] clk: bcm2835: Support for clock parent selection   Eric Anholt
  • [PATCH v2 2/3] clk: bcm2835: Support for clock parent selection   Remi Pommarel
    • [PATCH v2 2/3] clk: bcm2835: Support for clock parent selection   Eric Anholt
• [PATCH v2 0/5] Raspberry Pi power domains v2   Eric Anholt
  • [PATCH v2 3/5] ARM: bcm2835: add rpi power domain driver   Eric Anholt
    • [PATCH v2 3/5] ARM: bcm2835: add rpi power domain driver   Kevin Hilman
      • [PATCH v2 3/5] ARM: bcm2835: add rpi power domain driver   Eric Anholt
      • [PATCH v2 3/5] ARM: bcm2835: add rpi power domain driver   Kevin Hilman
    • [PATCH v2 3/5] ARM: bcm2835: add rpi power domain driver   Stefan Wahren
  • [PATCH v2 4/5] dt-bindings: add rpi power domain driver bindings   Eric Anholt
  • [PATCH v2 5/5] ARM: bcm2835: Add the Raspberry Pi power domain driver to the DT.   Eric Anholt
• [PATCH v2 1/5] power: domain: add pm_genpd_exit   Eric Anholt
  • [PATCH v2 1/5] power: domain: add pm_genpd_exit   Jon Hunter
    • [PATCH v2 1/5] power: domain: add pm_genpd_exit   Kevin Hilman
      • [PATCH v2 1/5] power: domain: add pm_genpd_exit   Alexander Aring
      • [PATCH v2 1/5] power: domain: add pm_genpd_exit   Russell King - ARM Linux
      • [PATCH v2 1/5] power: domain: add pm_genpd_exit   Ulf Hansson
• [PATCH v2 2/5] ARM: bcm2835: Define two new packets from the latest firmware.   Eric Anholt
• [PATCH] dmaengine: bcm2835-dma: Convert to use DMA pool   Vinod Koul
• [PATCH v5 5/5] iio: humidity: si7020: add No Hold read mode   Jonathan Cameron
  • [PATCH v5 5/5] iio: humidity: si7020: add No Hold read mode   Wolfram Sang
• [PATCH v3 0/4] Add PWM clock support for bcm2835   Remi Pommarel
  • [PATCH v3 1/4] clk: bcm2835: add a round up ability to the clock divisor   Remi Pommarel
    • [PATCH v3 1/4] clk: bcm2835: add a round up ability to the clock divisor   Eric Anholt
  • [PATCH v3 2/4] clk: bcm2835: Support for clock parent selection   Remi Pommarel
    • [PATCH v3 2/4] clk: bcm2835: Support for clock parent selection   Eric Anholt
  • [PATCH v3 3/4] clk: bcm2835: Add PWM clock support   Remi Pommarel
  • [PATCH v3 4/4] clk: bcm2835: Add PWM clock support to the device tree   Remi Pommarel
    • [PATCH v3 4/4] clk: bcm2835: Add PWM clock support to the device tree   Stefan Wahren
      • [PATCH v3 4/4] clk: bcm2835: Add PWM clock support to the device tree   Remi Pommarel
      • [PATCH v3 4/4] clk: bcm2835: Add PWM clock support to the device tree   Stefan Wahren
      • [PATCH v3 4/4] clk: bcm2835: Add PWM clock support to the device tree   Eric Anholt
      • [PATCH v3 4/4] clk: bcm2835: Add PWM clock support to the device tree   Remi Pommarel
      • [PATCH v3 4/4] clk: bcm2835: Add PWM clock support to the device tree   Eric Anholt
  • [PATCH v3 0/4] Add PWM clock support for bcm2835   Remi Pommarel
    • [PATCH v3 0/4] Add PWM clock support for bcm2835   Michael Turquette
• [PATCH V2 0/5] spi: spi-message transformation framework   kernel at martin.sperl.org
  • [PATCH V2 1/5] spi: core: added spi_resource management   kernel at martin.sperl.org
    • [PATCH V2 1/5] spi: core: added spi_resource management   Andy Shevchenko
      • [PATCH V2 1/5] spi: core: added spi_resource management   Martin Sperl
  • [PATCH V2 2/5] spi: core: add spi_replace_transfers method   kernel at martin.sperl.org
    • [PATCH V2 2/5] spi: core: add spi_replace_transfers method   Andy Shevchenko
      • [PATCH V2 2/5] spi: core: add spi_replace_transfers method   Martin Sperl
  • [PATCH V2 3/5] spi: core: add spi_split_transfers_maxsize   kernel at martin.sperl.org
  • [PATCH V2 4/5] spi: core add spi_master.translate_message   kernel at martin.sperl.org
  • [PATCH V2 5/5] spi: bcm2835: split long transfers   kernel at martin.sperl.org
  • [PATCH V2 0/5] spi: spi-message transformation framework   Martin Sperl
• [PATCH RESEND] pinctrl: bcm2835: Fix initial value for direction_output   Stefan Wahren
  • [PATCH RESEND] pinctrl: bcm2835: Fix initial value for direction_output   Stefan Wahren
    • [PATCH RESEND] pinctrl: bcm2835: Fix initial value for direction_output   Linus Walleij
• [PATCH v3 0/8] spi: spi-message transformation framework   kernel at martin.sperl.org
  • [PATCH v3 1/8] spi: core: added spi_resource management   kernel at martin.sperl.org
  • [PATCH v3 2/8] spi: core: add spi_replace_transfers method   kernel at martin.sperl.org
  • [PATCH v3 3/8] spi: core: add spi_split_transfers_maxsize   kernel at martin.sperl.org
  • [PATCH v3 4/8] spi: core: added spi_split_transfers_unaligned   kernel at martin.sperl.org
    • [PATCH v3 4/8] spi: core: added spi_split_transfers_unaligned   Martin Sperl
  • [PATCH v3 5/8] spi: core: add spi_merge_transfers method   kernel at martin.sperl.org
  • [PATCH v3 6/8] spi: core: add spi_master.translate_message   kernel at martin.sperl.org
  • [PATCH v3 7/8] spi: core: add spi_master.min_dma_len and supporting methods   kernel at martin.sperl.org
  • [PATCH v3 8/8] spi: bcm2835: move to spi-core methods translate_message and can_dma   kernel at martin.sperl.org
• device tree on rpi2 not working   Tim Sander
  • device tree on rpi2 not working   Eric Anholt
    • device tree on rpi2 not working   Tim Sander
      • device tree on rpi2 not working   Phil Elwell
  • device tree on rpi2 not working   Phil
    • device tree on rpi2 not working   Tim Sander
• [PATCH v3 0/4] Raspberry Pi power domains   Eric Anholt
  • [PATCH v3 1/4] ARM: bcm2835: Define two new packets from the latest firmware.   Eric Anholt
  • [PATCH v3 2/4] ARM: bcm2835: add rpi power domain driver   Eric Anholt
    • [PATCH v3 2/4] ARM: bcm2835: add rpi power domain driver   Florian Fainelli
      • [PATCH v3 2/4] ARM: bcm2835: add rpi power domain driver   Eric Anholt
      • [PATCH v3 2/4] ARM: bcm2835: add rpi power domain driver   Florian Fainelli
      • [PATCH v3 2/4] ARM: bcm2835: add rpi power domain driver   Eric Anholt
      • [PATCH v3 2/4] ARM: bcm2835: add rpi power domain driver   Sebastian Reichel
      • [PATCH v3 2/4] ARM: bcm2835: add rpi power domain driver   Krzysztof Kozlowski
      • [PATCH v3 2/4] ARM: bcm2835: add rpi power domain driver   Ulf Hansson
      • [PATCH v3 2/4] ARM: bcm2835: add rpi power domain driver   Eric Anholt
  • [PATCH v3 4/4] ARM: bcm2835: Add the Raspberry Pi power domain driver to the DT.   Eric Anholt
  • [PATCH v3 0/4] Raspberry Pi power domains   Ulf Hansson
    • [PATCH v3 0/4] Raspberry Pi power domains   Eric Anholt
      • [PATCH v3 0/4] Raspberry Pi power domains   Arnd Bergmann
      • [PATCH v3 0/4] Raspberry Pi power domains   Ulf Hansson
• [PATCH v3 3/4] dt-bindings: add rpi power domain driver bindings   Eric Anholt
• [PATCH v2 1/3] clk: bcm2835: Add bindings for the auxiliary peripheral clock gates.   Eric Anholt
  • [PATCH v2 2/3] clk: bcm2835: Add a driver for the auxiliary peripheral clock gates.   Eric Anholt
    • [PATCH v2 2/3] clk: bcm2835: Add a driver for the auxiliary peripheral clock gates.   Michael Turquette
  • [PATCH v2 1/3] clk: bcm2835: Add bindings for the auxiliary peripheral clock gates.   Rob Herring
    • [PATCH v2 1/3] clk: bcm2835: Add bindings for the auxiliary peripheral clock gates.   Michael Turquette
    • [PATCH v2 1/3] clk: bcm2835: Add bindings for the auxiliary peripheral clock gates.   Eric Anholt
      • [PATCH v2 1/3] clk: bcm2835: Add bindings for the auxiliary peripheral clock gates.   Michael Turquette
      • [PATCH v2 1/3] clk: bcm2835: Add bindings for the auxiliary peripheral clock gates.   Rob Herring
      • [PATCH v2 1/3] clk: bcm2835: Add bindings for the auxiliary peripheral clock gates.   Arnd Bergmann
      • [PATCH v2 1/3] clk: bcm2835: Add bindings for the auxiliary peripheral clock gates.   Michael Turquette
• [PATCH v2 3/3] ARM: bcm2835: Add the auxiliary clocks to the device tree.   Eric Anholt
  • [PATCH v2 3/3] ARM: bcm2835: Add the auxiliary clocks to the device tree.   Stefan Wahren
• [PATCH v2 0/8] Raspberry Pi 2 support.   Eric Anholt
  • [PATCH v2 2/8] irq: bcm2836: Add SMP support for the 2836   Eric Anholt
    • [PATCH v2 2/8] irq: bcm2836: Add SMP support for the 2836   Baruch Siach
  • [PATCH v2 5/8] ARM: bcm2835: Move the CPU/peripheral include out of common RPi DT.   Eric Anholt
  • [PATCH v2 6/8] ARM: bcm2835: Add devicetree for bcm2836 and Raspberry Pi 2 B   Eric Anholt
    • [PATCH v2 6/8] ARM: bcm2835: Add devicetree for bcm2836 and Raspberry Pi 2 B   Alexander Aring
  • [PATCH v2 7/8] ARM: bcm2835: Add a compat string for bcm2836 machine probe   Eric Anholt
  • [PATCH v2 8/8] ARM: bcm2835: Add Kconfig support for bcm2836   Eric Anholt
    • [PATCH v2 8/8] ARM: bcm2835: Add Kconfig support for bcm2836   Eric Anholt
  • [PATCH v2 0/8] Raspberry Pi 2 support.   Arnd Bergmann
    • [PATCH v2 0/8] Raspberry Pi 2 support.   Eric Anholt
      • [PATCH v2 0/8] Raspberry Pi 2 support.   Stefan Wahren
      • [PATCH v2 0/8] Raspberry Pi 2 support.   Arnd Bergmann
  • [PATCH v2 0/8] Raspberry Pi 2 support.   Alexander Aring
    • [PATCH v2 0/8] Raspberry Pi 2 support.   Alexander Aring
    • [PATCH v2 0/8] Raspberry Pi 2 support.   Alexander Aring
      • [PATCH v2 0/8] Raspberry Pi 2 support.   Eric Anholt
      • [PATCH v2 0/8] Raspberry Pi 2 support.   Alexander Aring
      • [PATCH v2 0/8] Raspberry Pi 2 support.   Eric Anholt
      • [PATCH v2 0/8] Raspberry Pi 2 support.   Noralf Trønnes
      • [PATCH v2 0/8] Raspberry Pi 2 support.   Arnd Bergmann
      • [PATCH v2 0/8] Raspberry Pi 2 support.   Alexander Aring
      • [PATCH v2 0/8] Raspberry Pi 2 support.   Arnd Bergmann
      • [PATCH v2 0/8] Raspberry Pi 2 support.   Eric Anholt
• [PATCH v2 1/8] irq: bcm2836: Fix initialization of the LOCAL_IRQ_CNT*IRQ timers   Eric Anholt
• [PATCH v2 3/8] dt-bindings: Add root properties for Raspberry Pi 2   Eric Anholt
  • [PATCH v2 3/8] dt-bindings: Add root properties for Raspberry Pi 2   Rob Herring
• [PATCH v2 4/8] ARM: bcm2835: Split the DT for peripherals from the DT for the CPU   Eric Anholt
  • [PATCH v2 4/8] ARM: bcm2835: Split the DT for peripherals from the DT for the CPU   Alexander Aring
    • [PATCH v2 4/8] ARM: bcm2835: Split the DT for peripherals from the DT for the CPU   Eric Anholt
• [PATCH v4 0/4] Raspberry Pi power domains   Eric Anholt
  • [PATCH v4 1/4] ARM: bcm2835: Define two new packets from the latest firmware.   Eric Anholt
  • [PATCH v4 2/4] ARM: bcm2835: add rpi power domain driver   Eric Anholt
    • [PATCH v4 2/4] ARM: bcm2835: add rpi power domain driver   Ulf Hansson
      • [PATCH v4 2/4] ARM: bcm2835: add rpi power domain driver   Eric Anholt
  • [PATCH v4 3/4] dt-bindings: add rpi power domain driver bindings   Eric Anholt
  • [PATCH v4 4/4] ARM: bcm2835: Add the Raspberry Pi power domain driver to the DT.   Eric Anholt
  • [PATCH v4 0/4] Raspberry Pi power domains   Kevin Hilman
• GOOD MORNING   SCARONI ROBERTO
• [RESEND][PATCH v2] dmaengine: bcm2835: Add slave dma support   Martin Sperl
  • [RESEND][PATCH v2] dmaengine: bcm2835: Add slave dma support   Vinod Koul
    • [RESEND][PATCH v2] dmaengine: bcm2835: Add slave dma support   Martin Sperl
      • [RESEND][PATCH v2] dmaengine: bcm2835: Add slave dma support   Vinod Koul
• [PATCH] pinctrl: bcm2835: Fix memory leak in error path   Stefan Wahren
  • [PATCH] pinctrl: bcm2835: Fix memory leak in error path   Eric Anholt
  • [PATCH] pinctrl: bcm2835: Fix memory leak in error path   Linus Walleij
• [PATCH 4/4] ARM: bcm2835: Switch to using the new clock driver support.   Martin Sperl
  • [PATCH 4/4] ARM: bcm2835: Switch to using the new clock driver support.   Stefan Wahren
    • [PATCH 4/4] ARM: bcm2835: Switch to using the new clock driver support.   Martin Sperl
      • [PATCH 4/4] ARM: bcm2835: Switch to using the new clock driver support.   Stefan Wahren
      • [PATCH 4/4] ARM: bcm2835: Switch to using the new clock driver support.   Martin Sperl
• [PATCH] clk: bcm2835: Add PWM clock support to the device tree   Remi Pommarel
  • [PATCH] clk: bcm2835: Add PWM clock support to the device tree   Eric Anholt
• Best watches in the world. Best present. Christmas sale!   REPLICA-WATCHES
• [PATCHv2 4/5] mmc: shdci-bcm2835: add verify for 32-bit back-to-back workaround   Stefan Wahren
  • [PATCHv2 4/5] mmc: shdci-bcm2835: add verify for 32-bit back-to-back workaround   Scott Branden
  • [PATCHv2 4/5] mmc: shdci-bcm2835: add verify for 32-bit back-to-back workaround   Stefan Wahren
• [PATCH] clk: bcm2835: added missing clock register definitions   kernel at martin.sperl.org
  • [PATCH] clk: bcm2835: added missing clock register definitions   Eric Anholt
• Including Raspberry Pi -next trees in linux-next   Eric Anholt
• [PATCH 0/4] bcm2836 (Raspberry Pi 2) interrupt controller updates for 4.5   Eric Anholt
  • [PATCH 2/4] irqchip: bcm2836: Add SMP support for the 2836   Eric Anholt
  • [PATCH 4/4] irqchip: bcm2836: make code more readable   Eric Anholt
• [PATCH 1/4] irqchip: bcm2836: Fix initialization of the LOCAL_IRQ_CNT*IRQ timers   Eric Anholt
• [PATCH 3/4] irqchip: bcm2836: tolerate IRQs while no flag is set in ISR   Eric Anholt
• usb: dwc2: regression on bcm2835 after commit 09c96980dc72   Stefan Wahren
• [GIT PULL] BCM2835/6 changes for 4.5 (I hope)   Eric Anholt
  • [GIT PULL 1/4] BCM2835 SOC changes for 4.5   Eric Anholt
  • [GIT PULL 2/4] BCM2835 drivers changes for 4.5   Eric Anholt
  • [GIT PULL 3/4] BCM2835 DT changes for 4.5   Eric Anholt
  • [GIT PULL 4/4] BCM2835 defconfig changes for 4.5   Eric Anholt
  • [GIT PULL] BCM2835/6 changes for 4.5 (I hope)   Florian Fainelli
    • [GIT PULL] BCM2835/6 changes for 4.5 (I hope)   Arnd Bergmann

Last message date: Thu Dec 31 08:21:07 PST 2015
Archived on: Sun Jan 3 03:28:29 PST 2016

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...