[PATCH v3 2/4] ARM: bcm2835: add rpi power domain driver
eric at anholt.net
Tue Dec 15 15:55:17 PST 2015
Florian Fainelli <f.fainelli at gmail.com> writes:
> On 15/12/15 13:40, Eric Anholt wrote:
>> From: Alexander Aring <alex.aring at gmail.com>
>> This patch adds support for several power domains on Raspberry Pi,
>> including USB (so it can be enabled even if the bootloader didn't do
>> it), and graphics.
>> This patch is the combined work of Eric Anholt (who wrote USB support
>> inside of the Raspberry Pi firmware driver, and wrote the non-USB
>> domain support) and Alexander Aring (who separated the original USB
>> work out from the firmware driver).
>> Signed-off-by: Alexander Aring <alex.aring at gmail.com>
>> Signed-off-by: Eric Anholt <eric at anholt.net>
>> v2: Add support for power domains other than USB, using the new
>> firmware interface, reword commit message (changes by Eric)
>> v3: Restructure as a builtin driver, and drop
>> of_genpd_add_provider_onecell error handling to avoid
>> pm_genpd_exit() dependency until that API can be settled. Clean
>> up copyright header, add missing ISP initialization, and fix typo
>> in transposer's name.
>> arch/arm/mach-bcm/Kconfig | 10 ++
>> arch/arm/mach-bcm/Makefile | 1 +
>> arch/arm/mach-bcm/raspberrypi-power.c | 247 ++++++++++++++++++++++++++++
>> include/dt-bindings/arm/raspberrypi-power.h | 41 +++++
>> 4 files changed, 299 insertions(+)
>> create mode 100644 arch/arm/mach-bcm/raspberrypi-power.c
> What motivated the location of this power domain driver in
> arch/arm/mach-bcm? Should not we have this in drivers/power/ or
> somewhere in drivers/ at the very least?
ls stronly suggests that power contains drivers for power supplies and
batteries, not power domains. There are 6 power domain drivers in
arch/arm, 3 in drivers/clk, and 3 in drivers/soc.
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 818 bytes
Desc: not available
More information about the linux-rpi-kernel