[PATCH v3 0/4] Raspberry Pi power domains
Eric Anholt
eric at anholt.net
Tue Dec 15 13:40:18 PST 2015
Since the pm_genpd_exit() patch is still going through review, and
other drivers in the tree just ignore the error cases, Ulf offered to
merge the series as a builtin driver not depending on that interface.
We still avoid dangling pointer references, by just continuing with
probing if of_genpd_add_provider_onecell() fails. We can easily go
back and update the driver when a pm_genpd_exit() lands.
Alexander Aring (3):
ARM: bcm2835: add rpi power domain driver
dt-bindings: add rpi power domain driver bindings
ARM: bcm2835: Add the Raspberry Pi power domain driver to the DT.
Eric Anholt (1):
ARM: bcm2835: Define two new packets from the latest firmware.
.../bindings/arm/bcm/raspberrypi,bcm2835-power.txt | 47 ++++
arch/arm/boot/dts/bcm2835-rpi.dtsi | 11 +
arch/arm/boot/dts/bcm2835.dtsi | 2 +-
arch/arm/mach-bcm/Kconfig | 10 +
arch/arm/mach-bcm/Makefile | 1 +
arch/arm/mach-bcm/raspberrypi-power.c | 247 +++++++++++++++++++++
include/dt-bindings/arm/raspberrypi-power.h | 41 ++++
include/soc/bcm2835/raspberrypi-firmware.h | 2 +
8 files changed, 360 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-power.txt
create mode 100644 arch/arm/mach-bcm/raspberrypi-power.c
create mode 100644 include/dt-bindings/arm/raspberrypi-power.h
--
2.6.2
More information about the linux-rpi-kernel
mailing list