[PATCH v3 0/4] Raspberry Pi power domains
Ulf Hansson
ulf.hansson at linaro.org
Thu Dec 17 13:08:33 PST 2015
On 17 December 2015 at 21:11, Arnd Bergmann <arnd at arndb.de> wrote:
> On Thursday 17 December 2015 11:03:47 Eric Anholt wrote:
>> >>
>> >> .../bindings/arm/bcm/raspberrypi,bcm2835-power.txt | 47 ++++
>> >> arch/arm/boot/dts/bcm2835-rpi.dtsi | 11 +
>> >> arch/arm/boot/dts/bcm2835.dtsi | 2 +-
>> >> arch/arm/mach-bcm/Kconfig | 10 +
>> >> arch/arm/mach-bcm/Makefile | 1 +
>> >> arch/arm/mach-bcm/raspberrypi-power.c | 247 +++++++++++++++++++++
>> >> include/dt-bindings/arm/raspberrypi-power.h | 41 ++++
>> >> include/soc/bcm2835/raspberrypi-firmware.h | 2 +
>> >> 8 files changed, 360 insertions(+), 1 deletion(-)
>> >> create mode 100644 Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-power.txt
>> >> create mode 100644 arch/arm/mach-bcm/raspberrypi-power.c
>> >> create mode 100644 include/dt-bindings/arm/raspberrypi-power.h
>> >>
>> >> --
>> >> 2.6.2
>> >>
>> >
>> > Besides a nitpick for patch2, I would also reverse the order of patch3
>> > and patch2. DT docs should go in before the actual parsing of the new
>> > bindings/compatibles.
>> >
>> > Anyway, for the hole series, you may add my:
>> >
>> > Reviewed-by: Ulf Hansson <ulf.hansson at linaro.org>
>>
>> Would your tree be pulling the series (since it's power domains), or
>> should I (since it's SOC stuff)?
>>
>
> All of the above files go through the arm-soc tree by default.
That should work as I don't see any other dependency, unless
Eric/Alexander think there is.
Kind regards
Uffe
More information about the linux-rpi-kernel
mailing list