[PATCH v3 0/4] Raspberry Pi power domains
ulf.hansson at linaro.org
Thu Dec 17 08:33:30 PST 2015
On 15 December 2015 at 22:40, Eric Anholt <eric at anholt.net> wrote:
> Since the pm_genpd_exit() patch is still going through review, and
> other drivers in the tree just ignore the error cases, Ulf offered to
> merge the series as a builtin driver not depending on that interface.
> We still avoid dangling pointer references, by just continuing with
> probing if of_genpd_add_provider_onecell() fails. We can easily go
> back and update the driver when a pm_genpd_exit() lands.
> Alexander Aring (3):
> ARM: bcm2835: add rpi power domain driver
> dt-bindings: add rpi power domain driver bindings
> ARM: bcm2835: Add the Raspberry Pi power domain driver to the DT.
> Eric Anholt (1):
> ARM: bcm2835: Define two new packets from the latest firmware.
> .../bindings/arm/bcm/raspberrypi,bcm2835-power.txt | 47 ++++
> arch/arm/boot/dts/bcm2835-rpi.dtsi | 11 +
> arch/arm/boot/dts/bcm2835.dtsi | 2 +-
> arch/arm/mach-bcm/Kconfig | 10 +
> arch/arm/mach-bcm/Makefile | 1 +
> arch/arm/mach-bcm/raspberrypi-power.c | 247 +++++++++++++++++++++
> include/dt-bindings/arm/raspberrypi-power.h | 41 ++++
> include/soc/bcm2835/raspberrypi-firmware.h | 2 +
> 8 files changed, 360 insertions(+), 1 deletion(-)
> create mode 100644 Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-power.txt
> create mode 100644 arch/arm/mach-bcm/raspberrypi-power.c
> create mode 100644 include/dt-bindings/arm/raspberrypi-power.h
Besides a nitpick for patch2, I would also reverse the order of patch3
and patch2. DT docs should go in before the actual parsing of the new
Anyway, for the hole series, you may add my:
Reviewed-by: Ulf Hansson <ulf.hansson at linaro.org>
More information about the linux-rpi-kernel