December 2025 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Mon Dec 1 00:37:58 PST 2025
Ending: Wed Dec 31 11:18:51 PST 2025
Messages: 612

• [PATCH net-next 5/9] phy: add phy_get_rx_polarity() and phy_get_tx_polarity()   Vinod Koul
  • [PATCH net-next 5/9] phy: add phy_get_rx_polarity() and phy_get_tx_polarity()   Krzysztof Kozlowski
    • [PATCH net-next 5/9] phy: add phy_get_rx_polarity() and phy_get_tx_polarity()   Vladimir Oltean
      • [PATCH net-next 5/9] phy: add phy_get_rx_polarity() and phy_get_tx_polarity()   Krzysztof Kozlowski
  • [PATCH net-next 5/9] phy: add phy_get_rx_polarity() and phy_get_tx_polarity()   Jakub Kicinski
• [PATCH] MAINTAINERS: phy: Add Neil Armstrong as reviewers for phy subsystem   Vinod Koul
  • [PATCH] MAINTAINERS: phy: Add Neil Armstrong as reviewers for phy subsystem   Neil Armstrong
  • [PATCH] MAINTAINERS: phy: Add Neil Armstrong as reviewers for phy subsystem   Vinod Koul
• [PATCH] iio: inkern: Use namespaced exports   Romain Gantois
  • [PATCH] iio: inkern: Use namespaced exports   Andy Shevchenko
  • [PATCH] iio: inkern: Use namespaced exports   David Lechner
    • [PATCH] iio: inkern: Use namespaced exports   Romain Gantois
      • [PATCH] iio: inkern: Use namespaced exports   Jonathan Cameron
  • [PATCH] iio: inkern: Use namespaced exports   Guenter Roeck
  • [PATCH] iio: inkern: Use namespaced exports   Sebastian Reichel
    • [PATCH] iio: inkern: Use namespaced exports   Jonathan Cameron
• [PATCH v6 4/7] phy: spacemit: Introduce PCIe/combo PHY   Alex Elder
• [PATCH v6 2/2] phy: spacemit: support K1 USB2.0 PHY controller   Ze Huang
• [PATCH] phy: ti: gmii-sel: fix regmap leak on probe failure   Andrew Davis
  • [PATCH] phy: ti: gmii-sel: fix regmap leak on probe failure   Vinod Koul
• Lynx 10G SerDes Driver on my kernel   Tanjeff Moos
  • Lynx 10G SerDes Driver on my kernel   Vladimir Oltean
    • Lynx 10G SerDes Driver on my kernel   Tanjeff Moos
      • Lynx 10G SerDes Driver on my kernel   Vladimir Oltean
      • Lynx 10G SerDes Driver on my kernel   Tanjeff Moos
      • Lynx 10G SerDes Driver on my kernel   Vladimir Oltean
      • Lynx 10G SerDes Driver on my kernel   Tanjeff Moos
      • Lynx 10G SerDes Driver on my kernel   Vladimir Oltean
      • Lynx 10G SerDes Driver on my kernel   Tanjeff Moos
      • Lynx 10G SerDes Driver on my kernel   Vladimir Oltean
      • Lynx 10G SerDes Driver on my kernel   Tanjeff Moos
• [PATCH] MAINTAINERS: phy: Move Kishon Vijay Abraham I to credits   Vinod Koul
• [PATCH 1/1] phy: tegra: xusb: Fix UTMI AO sleepwalk trigger programming sequence   Wayne Chang
  • [PATCH 1/1] phy: tegra: xusb: Fix UTMI AO sleepwalk trigger programming sequence   JC Kuo
    • [PATCH 1/1] phy: tegra: xusb: Fix UTMI AO sleepwalk trigger programming sequence   Wayne Chang
• [PATCH 0/3] Add eusb2 repeater squelch detect parameter override   Krishna Kurapati
  • [PATCH 1/3] dt-bindings: phy: qcom,snps-eusb2-repeater: Add squelch param update   Krishna Kurapati
    • [PATCH 1/3] dt-bindings: phy: qcom,snps-eusb2-repeater: Add squelch param update   Konrad Dybcio
  • [PATCH 2/3] phy: qualcomm: phy-qcom-eusb2-repeater: Add squelch detect param update   Krishna Kurapati
    • [PATCH 2/3] phy: qualcomm: phy-qcom-eusb2-repeater: Add squelch detect param update   Konrad Dybcio
      • [PATCH 2/3] phy: qualcomm: phy-qcom-eusb2-repeater: Add squelch detect param update   Krishna Kurapati PSSNV
  • [PATCH 3/3] arm64: dts: qcom: sm8750-mtp: Add eusb2 repeater tuning parameters   Krishna Kurapati
• [PATCH 0/2] Fixup HDMI PLL for phy-rockchip-samsung-hdptx   Cristian Ciocaltea
  • [PATCH 1/2] phy: rockchip: samsung-hdptx: Pre-compute HDMI PLL config for 461.10125 MHz output   Cristian Ciocaltea
    • [PATCH 1/2] phy: rockchip: samsung-hdptx: Pre-compute HDMI PLL config for 461.10125 MHz output   Derek Foreman
  • [PATCH 2/2] phy: rockchip: samsung-hdptx: Cleanup TMDS PLL config table   Cristian Ciocaltea
• [PATCH v2 0/3] Add eusb2 repeater squelch detect parameter override   Krishna Kurapati
  • [PATCH v2 1/3] dt-bindings: phy: qcom,snps-eusb2-repeater: Add squelch param update   Krishna Kurapati
    • [PATCH v2 1/3] dt-bindings: phy: qcom,snps-eusb2-repeater: Add squelch param update   Dmitry Baryshkov
      • [PATCH v2 1/3] dt-bindings: phy: qcom,snps-eusb2-repeater: Add squelch param update   Krzysztof Kozlowski
      • [PATCH v2 1/3] dt-bindings: phy: qcom,snps-eusb2-repeater: Add squelch param update   Krishna Kurapati
      • [PATCH v2 1/3] dt-bindings: phy: qcom,snps-eusb2-repeater: Add squelch param update   Krishna Kurapati
      • [PATCH v2 1/3] dt-bindings: phy: qcom,snps-eusb2-repeater: Add squelch param update   Krishna Kurapati
  • [PATCH v2 2/3] phy: qualcomm: phy-qcom-eusb2-repeater: Add squelch detect param update   Krishna Kurapati
    • [PATCH v2 2/3] phy: qualcomm: phy-qcom-eusb2-repeater: Add squelch detect param update   Konrad Dybcio
      • [PATCH v2 2/3] phy: qualcomm: phy-qcom-eusb2-repeater: Add squelch detect param update   Krishna Kurapati
      • [PATCH v2 2/3] phy: qualcomm: phy-qcom-eusb2-repeater: Add squelch detect param update   Konrad Dybcio
  • [PATCH v2 3/3] arm64: dts: qcom: sm8750-mtp: Add eusb2 repeater tuning parameters   Krishna Kurapati
    • [PATCH v2 3/3] arm64: dts: qcom: sm8750-mtp: Add eusb2 repeater tuning parameters   Abel Vesa
    • [PATCH v2 3/3] arm64: dts: qcom: sm8750-mtp: Add eusb2 repeater tuning parameters   Konrad Dybcio
      • [PATCH v2 3/3] arm64: dts: qcom: sm8750-mtp: Add eusb2 repeater tuning parameters   Krishna Kurapati
• [RESEND PATCH v11 00/11] Add Type-C DP support for RK3399 EVB IND board   Chaoyi Chen
  • [RESEND PATCH v11 01/11] usb: typec: Set the bus also for the port and plug altmodes   Chaoyi Chen
  • [RESEND PATCH v11 02/11] usb: typec: Export typec bus and typec altmode device type   Chaoyi Chen
    • [RESEND PATCH v11 02/11] usb: typec: Export typec bus and typec altmode device type   Heikki Krogerus
  • [RESEND PATCH v11 03/11] drm/bridge: Implement generic USB Type-C DP HPD bridge   Chaoyi Chen
    • [RESEND PATCH v11 03/11] drm/bridge: Implement generic USB Type-C DP HPD bridge   Heikki Krogerus
      • [RESEND PATCH v11 03/11] drm/bridge: Implement generic USB Type-C DP HPD bridge   Chaoyi Chen
      • [RESEND PATCH v11 03/11] drm/bridge: Implement generic USB Type-C DP HPD bridge   Heikki Krogerus
  • [RESEND PATCH v11 04/11] drm/bridge: aux: Add drm_aux_bridge_register_from_node()   Chaoyi Chen
  • [RESEND PATCH v11 05/11] dt-bindings: phy: rockchip: rk3399-typec-phy: Support mode-switch   Chaoyi Chen
  • [RESEND PATCH v11 06/11] phy: rockchip: phy-rockchip-typec: Add typec_mux/typec_switch support   Chaoyi Chen
  • [RESEND PATCH v11 07/11] phy: rockchip: phy-rockchip-typec: Add DRM AUX bridge   Chaoyi Chen
  • [RESEND PATCH v11 08/11] drm/rockchip: cdn-dp: Support handle lane info without extcon   Chaoyi Chen
  • [RESEND PATCH v11 09/11] drm/rockchip: cdn-dp: Add multiple bridges to support PHY port selection   Chaoyi Chen
  • [RESEND PATCH v11 10/11] arm64: dts: rockchip: Add missing dp_out port for RK3399 CDN-DP   Chaoyi Chen
  • [RESEND PATCH v11 11/11] arm64: dts: rockchip: rk3399-evb-ind: Add support for DisplayPort   Chaoyi Chen
• [PATCH v5 05/22] dt-bindings: reset: renesas,rzv2h-usb2phy: Add '#mux-state-cells' property   Krzysztof Kozlowski
• [PATCH v11 03/11] drm/bridge: Implement generic USB Type-C DP HPD bridge   Heikki Krogerus
• [PATCH net-next 2/9] dt-bindings: phy-common-props: create a reusable "protocol-names" definition   Rob Herring
  • [PATCH net-next 2/9] dt-bindings: phy-common-props: create a reusable "protocol-names" definition   Rob Herring
• [PATCH net-next 1/9] dt-bindings: phy: rename transmit-amplitude.yaml to phy-common-props.yaml   Rob Herring (Arm)
• [PATCH net-next 3/9] dt-bindings: phy-common-props: RX and TX lane polarity inversion   Rob Herring (Arm)
• [PATCH net-next 4/9] dt-bindings: net: xpcs: allow properties from phy-common-props.yaml   Rob Herring (Arm)
• [PATCH net-next 9/9] dt-bindings: net: airoha,en8811h: deprecate "airoha,pnswap-rx" and "airoha,pnswap-tx"   Rob Herring (Arm)
• [PATCH v6 0/7] Add ASPEED PCIe Root Complex support   Rob Herring
  • [PATCH v6 0/7] Add ASPEED PCIe Root Complex support   Jacky Chou
    • [PATCH v6 0/7] Add ASPEED PCIe Root Complex support   Rob Herring
      • [PATCH v6 0/7] Add ASPEED PCIe Root Complex support   Jacky Chou
• [PATCH 0/5] Fixes to Tegra USB role switching and Smaug USB role switching enablement   Diogo Ivo
  • [PATCH 2/5] phy: tegra: xusb: Fix USB2 port regulator disable logic   Diogo Ivo
    • [PATCH 2/5] phy: tegra: xusb: Fix USB2 port regulator disable logic   Vinod Koul
  • [PATCH 3/5] phy: tegra: xusb: Fix ordering issue when switching roles on USB2 ports   Diogo Ivo
  • [PATCH 4/5] arm64: tegra: smaug: Complete and enable tegra-udc node   Diogo Ivo
  • [PATCH 5/5] arm64: tegra: smaug: Add usb-role-switch support   Diogo Ivo
  • [PATCH 0/5] Fixes to Tegra USB role switching and Smaug USB role switching enablement   Rob Herring
• [PATCH 1/5] usb: host: tegra: Remove redundant pm_runtime_mark_last_busy() call   Diogo Ivo
  • [PATCH 1/5] usb: host: tegra: Remove redundant pm_runtime_mark_last_busy() call   Diogo Ivo
• [PATCH v7 2/2] phy: Add Google Tensor SoC USB PHY driver   Roy Luo
• [PATCH v8 0/2] Add Google Tensor SoC USB PHY support   Roy Luo
  • [PATCH v8 1/2] dt-bindings: phy: google: Add Google Tensor G5 USB PHY   Roy Luo
    • [PATCH v8 1/2] dt-bindings: phy: google: Add Google Tensor G5 USB PHY   Krzysztof Kozlowski
      • [PATCH v8 1/2] dt-bindings: phy: google: Add Google Tensor G5 USB PHY   Roy Luo
      • [PATCH v8 1/2] dt-bindings: phy: google: Add Google Tensor G5 USB PHY   Krzysztof Kozlowski
      • [PATCH v8 1/2] dt-bindings: phy: google: Add Google Tensor G5 USB PHY   Roy Luo
      • [PATCH v8 1/2] dt-bindings: phy: google: Add Google Tensor G5 USB PHY   Krzysztof Kozlowski
      • [PATCH v8 1/2] dt-bindings: phy: google: Add Google Tensor G5 USB PHY   Roy Luo
      • [PATCH v8 1/2] dt-bindings: phy: google: Add Google Tensor G5 USB PHY   Roy Luo
      • [PATCH v8 1/2] dt-bindings: phy: google: Add Google Tensor G5 USB PHY   Krzysztof Kozlowski
    • [PATCH v8 1/2] dt-bindings: phy: google: Add Google Tensor G5 USB PHY   Krzysztof Kozlowski
  • [PATCH v8 2/2] phy: Add Google Tensor SoC USB PHY driver   Roy Luo
• [PATCH v5 0/4] phy: qcom: edp: Add support for Glymur platform   Abel Vesa
  • [PATCH v5 1/4] dt-bindings: phy: Add DP PHY compatible for Glymur   Abel Vesa
  • [PATCH v5 2/4] phy: qcom: edp: Fix the DP_PHY_AUX_CFG registers count   Abel Vesa
    • [PATCH v5 2/4] phy: qcom: edp: Fix the DP_PHY_AUX_CFG registers count   Dmitry Baryshkov
  • [PATCH v5 3/4] phy: qcom-qmp: qserdes-com: Add v8 DP-specific qserdes register offsets   Abel Vesa
  • [PATCH v5 4/4] phy: qcom: edp: Add Glymur platform support   Abel Vesa
    • [PATCH v5 4/4] phy: qcom: edp: Add Glymur platform support   Dmitry Baryshkov
      • [PATCH v5 4/4] phy: qcom: edp: Add Glymur platform support   Abel Vesa
      • [PATCH v5 4/4] phy: qcom: edp: Add Glymur platform support   Abel Vesa
      • [PATCH v5 4/4] phy: qcom: edp: Add Glymur platform support   Dmitry Baryshkov
• [PATCH] phy: qcom-qusb2: Fix NULL pointer dereference on early suspend   Loic Poulain
  • [PATCH] phy: qcom-qusb2: Fix NULL pointer dereference on early suspend   Dmitry Baryshkov
    • [PATCH] phy: qcom-qusb2: Fix NULL pointer dereference on early suspend   Loic Poulain
  • [PATCH] phy: qcom-qusb2: Fix NULL pointer dereference on early suspend   Bjorn Andersson
    • [PATCH] phy: qcom-qusb2: Fix NULL pointer dereference on early suspend   Loic Poulain
• [PATCH v2] phy: sparx5-serdes: make it selectable for ARCH_LAN969X   Vladimir Oltean
  • [PATCH v2] phy: sparx5-serdes: make it selectable for ARCH_LAN969X   Vinod Koul
• [PATCH v4 0/6] Add support for the LTM8054 voltage regulator   Jonathan Cameron
• [PATCH v13 00/11] Add Type-C DP support for RK3399 EVB IND board   Chaoyi Chen
  • [PATCH v13 04/11] drm/bridge: aux: Add drm_aux_bridge_register_from_node()   Chaoyi Chen
  • [PATCH v13 05/11] dt-bindings: phy: rockchip: rk3399-typec-phy: Support mode-switch   Chaoyi Chen
  • [PATCH v13 06/11] phy: rockchip: phy-rockchip-typec: Add typec_mux/typec_switch support   Chaoyi Chen
  • [PATCH v13 07/11] phy: rockchip: phy-rockchip-typec: Add DRM AUX bridge   Chaoyi Chen
  • [PATCH v13 08/11] drm/rockchip: cdn-dp: Support handle lane info without extcon   Chaoyi Chen
  • [PATCH v13 09/11] drm/rockchip: cdn-dp: Add multiple bridges to support PHY port selection   Chaoyi Chen
  • [PATCH v13 10/11] arm64: dts: rockchip: Add missing dp_out port for RK3399 CDN-DP   Chaoyi Chen
  • [PATCH v13 11/11] arm64: dts: rockchip: rk3399-evb-ind: Add support for DisplayPort   Chaoyi Chen
• [PATCH v13 01/11] usb: typec: Set the bus also for the port and plug altmodes   Chaoyi Chen
• [PATCH v13 02/11] usb: typec: Export typec bus and typec altmode device type   Chaoyi Chen
• [PATCH v13 03/11] drm/bridge: Implement generic USB Type-C DP HPD bridge   Chaoyi Chen
• [PATCH 0/2] Add support for TI TCAN1046 CAN transceiver   Prabhakar
  • [PATCH 1/2] dt-bindings: phy: ti,tcan104x-can: Document TI TCAN1046   Prabhakar
    • [PATCH 1/2] dt-bindings: phy: ti,tcan104x-can: Document TI TCAN1046   Frank Li
      • [PATCH 1/2] dt-bindings: phy: ti,tcan104x-can: Document TI TCAN1046   Lad, Prabhakar
  • [PATCH 2/2] phy: phy-can-transceiver: Add support for TI TCAN1046   Prabhakar
• [PATCH v6 6/7] PCI: aspeed: Add ASPEED PCIe RC driver   Bjorn Helgaas
  • [PATCH v6 6/7] PCI: aspeed: Add ASPEED PCIe RC driver   Jacky Chou
• [PATCH] phy: stm32-usphyc: Fix off by one in probe()   Dan Carpenter
  • [Linux-stm32] [PATCH] phy: stm32-usphyc: Fix off by one in probe()   Amelie Delaunay
  • [PATCH] phy: stm32-usphyc: Fix off by one in probe()   Vinod Koul
• [PATCH v2 0/2] iio: inkern: Use namespaced exports   Romain Gantois
  • [PATCH v2 1/2] iio: dac: ds4424: drop unused include IIO consumer header   Romain Gantois
    • [PATCH v2 1/2] iio: dac: ds4424: drop unused include IIO consumer header   Andy Shevchenko
  • [PATCH v2 2/2] iio: inkern: Use namespaced exports   Romain Gantois
    • [PATCH v2 2/2] iio: inkern: Use namespaced exports   Vinod Koul
• [PATCH v2] dt-bindings: phy: ti,tcan104x-can: Document TI TCAN1046   Prabhakar
  • [PATCH v2] dt-bindings: phy: ti,tcan104x-can: Document TI TCAN1046   Marc Kleine-Budde
    • [PATCH v2] dt-bindings: phy: ti,tcan104x-can: Document TI TCAN1046   Conor Dooley
      • [PATCH v2] dt-bindings: phy: ti,tcan104x-can: Document TI TCAN1046   Lad, Prabhakar
      • [PATCH v2] dt-bindings: phy: ti,tcan104x-can: Document TI TCAN1046   Marc Kleine-Budde
      • [PATCH v2] dt-bindings: phy: ti,tcan104x-can: Document TI TCAN1046   Conor Dooley
      • [PATCH v2] dt-bindings: phy: ti,tcan104x-can: Document TI TCAN1046   Geert Uytterhoeven
  • [PATCH v2] dt-bindings: phy: ti,tcan104x-can: Document TI TCAN1046   Vinod Koul
• [PATCH 00/12] Add HDMI support for Mediatek Genio 510/700/1200-EVK and Radxa NIO-12L boards   Louis-Alexis Eyraud
  • [PATCH 01/12] dt-bindings: phy: mediatek,hdmi-phy: Fix clock output names for MT8195   Louis-Alexis Eyraud
    • [PATCH 01/12] dt-bindings: phy: mediatek,hdmi-phy: Fix clock output names for MT8195   Rob Herring (Arm)
  • [PATCH 02/12] dt-bindings: phy: mediatek,hdmi-phy: Add support for MT8188 SoC   Louis-Alexis Eyraud
  • [PATCH 03/12] dt-bindings: phy: mediatek,hdmi-phy: Document extra clocks for MT8195   Louis-Alexis Eyraud
    • [PATCH 03/12] dt-bindings: phy: mediatek,hdmi-phy: Document extra clocks for MT8195   Rob Herring
  • [PATCH 04/12] arm64: dts: mediatek: mt8195: Add DPI1, HDMI, HDMI PHY/DDC nodes   Louis-Alexis Eyraud
  • [PATCH 05/12] arm64: dts: mediatek: mt8188: Add DPI1, HDMI, HDMI PHY/DDC nodes   Louis-Alexis Eyraud
  • [PATCH 06/12] arm64: dts: mediatek: mt8390-genio-common: Enable HDMI output   Louis-Alexis Eyraud
  • [PATCH 07/12] arm64: dts: mediatek: mt8390-genio-common: Add HDMI sound output support   Louis-Alexis Eyraud
  • [PATCH 08/12] arm64: dts: mediatek: mt8395-radxa-nio-12l: Enable HDMI output   Louis-Alexis Eyraud
  • [PATCH 09/12] arm64: dts: mediatek: mt8395-radxa-nio-12l: Add HDMI sound output support   Louis-Alexis Eyraud
  • [PATCH 10/12] arm64: dts: mediatek: mt8395-genio-common: Enable HDMI output   Louis-Alexis Eyraud
  • [PATCH 11/12] arm64: dts: mediatek: mt8395-genio-common: Add HDMI sound output support   Louis-Alexis Eyraud
  • [PATCH 12/12] arm64: defconfig: Enable Mediatek HDMIv2 driver   Louis-Alexis Eyraud
• [PATCH v8 0/9] Introduce Glymur USB support   Wesley Cheng
  • [PATCH v8 1/9] dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp-phy: Add Glymur compatible   Wesley Cheng
    • [PATCH v8 1/9] dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp-phy: Add Glymur compatible   Rob Herring (Arm)
  • [PATCH v8 2/9] dt-bindings: phy: qcom,qmp-usb: Add Glymur USB UNI PHY compatible   Wesley Cheng
    • [PATCH v8 2/9] dt-bindings: phy: qcom,qmp-usb: Add Glymur USB UNI PHY compatible   Rob Herring (Arm)
  • [PATCH v8 3/9] dt-bindings: phy: qcom-m31-eusb2: Add Glymur compatible   Wesley Cheng
  • [PATCH v8 4/9] dt-bindings: phy: qcom,snps-eusb2-repeater: Add SMB2370 compatible   Wesley Cheng
  • [PATCH v8 5/9] phy: qualcomm: eusb2-repeater: Add SMB2370 eUSB2 repeater support   Wesley Cheng
  • [PATCH v8 6/9] phy: qualcomm: qmp-usb: Add support for Glymur USB UNI PHY   Wesley Cheng
  • [PATCH v8 7/9] phy: qualcomm: Update the QMP clamp register for V6   Wesley Cheng
  • [PATCH v8 8/9] phy: qualcomm: qmp-combo: Update QMP PHY with Glymur settings   Wesley Cheng
    • [PATCH v8 8/9] phy: qualcomm: qmp-combo: Update QMP PHY with Glymur settings   Dmitry Baryshkov
      • [PATCH v8 8/9] phy: qualcomm: qmp-combo: Update QMP PHY with Glymur settings   Wesley Cheng
      • [PATCH v8 8/9] phy: qualcomm: qmp-combo: Update QMP PHY with Glymur settings   Dmitry Baryshkov
  • [PATCH v8 9/9] phy: qualcomm: qmp-combo: Add DP offsets and settings for Glymur platforms   Wesley Cheng
    • [PATCH v8 9/9] phy: qualcomm: qmp-combo: Add DP offsets and settings for Glymur platforms   Dmitry Baryshkov
  • [PATCH v8 0/9] Introduce Glymur USB support   Vinod Koul
• [PATCH v4 5/5] phy: qcom: qmp-pcie: add QMP PCIe PHY tables for Kaanapali   Dmitry Baryshkov
  • [PATCH v4 5/5] phy: qcom: qmp-pcie: add QMP PCIe PHY tables for Kaanapali   Qiang Yu
    • [PATCH v4 5/5] phy: qcom: qmp-pcie: add QMP PCIe PHY tables for Kaanapali   Dmitry Baryshkov
      • [PATCH v4 5/5] phy: qcom: qmp-pcie: add QMP PCIe PHY tables for Kaanapali   Qiang Yu
      • [PATCH v4 5/5] phy: qcom: qmp-pcie: add QMP PCIe PHY tables for Kaanapali   Dmitry Baryshkov
• [PATCH v4 2/7] phy: Add driver for EyeQ5 Ethernet PHY wrapper   Luca Ceresoli
  • [PATCH v4 2/7] phy: Add driver for EyeQ5 Ethernet PHY wrapper   Théo Lebrun
    • [PATCH v4 2/7] phy: Add driver for EyeQ5 Ethernet PHY wrapper   Luca Ceresoli
      • [PATCH v4 2/7] phy: Add driver for EyeQ5 Ethernet PHY wrapper   Théo Lebrun
      • [PATCH v4 2/7] phy: Add driver for EyeQ5 Ethernet PHY wrapper   Luca Ceresoli
• [PATCH v4 3/7] clk: eyeq: use the auxiliary device creation helper   Luca Ceresoli
• [PATCH v4 4/7] clk: eyeq: add EyeQ5 children auxiliary device for generic PHYs   Luca Ceresoli
• [PATCH v3 0/6] mmc: host: renesas_sdhi_core: support configuring an optional sdio mux   Josua Mayer
  • [PATCH v3 3/6] phy: can-transceiver: drop temporary helper getting optional mux-state   Josua Mayer
    • [PATCH v3 3/6] phy: can-transceiver: drop temporary helper getting optional mux-state   Geert Uytterhoeven
    • [PATCH v3 3/6] phy: can-transceiver: drop temporary helper getting optional mux-state   Vinod Koul
  • [PATCH v3 4/6] i2c: omap: switch to new generic helper for getting selected mux-state   Josua Mayer
    • [PATCH v3 4/6] i2c: omap: switch to new generic helper for getting selected mux-state   Andreas Kemnade
  • [PATCH v3 5/6] dt-bindings: mmc: renesas,sdhi: Add mux-states property   Josua Mayer
  • [PATCH v3 6/6] mmc: host: renesas_sdhi_core: support selecting an optional mux   Josua Mayer
  • [PATCH v3 0/6] mmc: host: renesas_sdhi_core: support configuring an optional sdio mux   Ulf Hansson
    • [PATCH v3 0/6] mmc: host: renesas_sdhi_core: support configuring an optional sdio mux   Josua Mayer
• [PATCH v3 1/6] phy: can-transceiver: rename temporary helper function to avoid conflict   Josua Mayer
  • [PATCH v3 1/6] phy: can-transceiver: rename temporary helper function to avoid conflict   Geert Uytterhoeven
  • [PATCH v3 1/6] phy: can-transceiver: rename temporary helper function to avoid conflict   Vinod Koul
• [PATCH v3 2/6] mux: Add helper functions for getting optional and selected mux-state   Josua Mayer
  • [PATCH v3 2/6] mux: Add helper functions for getting optional and selected mux-state   Ulf Hansson
    • [PATCH v3 2/6] mux: Add helper functions for getting optional and selected mux-state   Josua Mayer
      • [PATCH v3 2/6] mux: Add helper functions for getting optional and selected mux-state   Ulf Hansson
      • [PATCH v3 2/6] mux: Add helper functions for getting optional and selected mux-state   Josua Mayer
      • [PATCH v3 2/6] mux: Add helper functions for getting optional and selected mux-state   Ulf Hansson
  • [PATCH v3 2/6] mux: Add helper functions for getting optional and selected mux-state   Geert Uytterhoeven
    • [PATCH v3 2/6] mux: Add helper functions for getting optional and selected mux-state   Josua Mayer
      • [PATCH v3 2/6] mux: Add helper functions for getting optional and selected mux-state   Josua Mayer
• [PATCH v6 0/4] phy: qcom: edp: Add support for Glymur platform   Abel Vesa
  • [PATCH v6 1/4] dt-bindings: phy: Add DP PHY compatible for Glymur   Abel Vesa
  • [PATCH v6 2/4] phy: qcom: edp: Fix the DP_PHY_AUX_CFG registers count   Abel Vesa
  • [PATCH v6 3/4] phy: qcom-qmp: qserdes-com: Add v8 DP-specific qserdes register offsets   Abel Vesa
  • [PATCH v6 4/4] phy: qcom: edp: Add Glymur platform support   Abel Vesa
    • [PATCH v6 4/4] phy: qcom: edp: Add Glymur platform support   Dmitry Baryshkov
• [PATCH v2] phy: qcom-qusb2: Fix NULL pointer dereference on early suspend   Loic Poulain
  • [PATCH v2] phy: qcom-qusb2: Fix NULL pointer dereference on early suspend   Dmitry Baryshkov
    • [PATCH v2] phy: qcom-qusb2: Fix NULL pointer dereference on early suspend   Loic Poulain
      • [PATCH v2] phy: qcom-qusb2: Fix NULL pointer dereference on early suspend   Dmitry Baryshkov
      • [PATCH v2] phy: qcom-qusb2: Fix NULL pointer dereference on early suspend   Loic Poulain
• [PATCH v3] phy: qcom-qusb2: Fix NULL pointer dereference on early suspend   Loic Poulain
  • [PATCH v3] phy: qcom-qusb2: Fix NULL pointer dereference on early suspend   Abel Vesa
  • [PATCH v3] phy: qcom-qusb2: Fix NULL pointer dereference on early suspend   Dmitry Baryshkov
    • [PATCH v3] phy: qcom-qusb2: Fix NULL pointer dereference on early suspend   Loic Poulain
      • [PATCH v3] phy: qcom-qusb2: Fix NULL pointer dereference on early suspend   Dmitry Baryshkov
      • [PATCH v3] phy: qcom-qusb2: Fix NULL pointer dereference on early suspend   Loic Poulain
      • [PATCH v3] phy: qcom-qusb2: Fix NULL pointer dereference on early suspend   Dmitry Baryshkov
• [PATCH v3 0/9] phy: convert from clk round_rate() to determine_rate()   Brian Masney
  • [PATCH v3 0/9] phy: convert from clk round_rate() to determine_rate()   Brian Masney
    • [PATCH v3 1/9] phy: freescale: phy-fsl-samsung-hdmi: convert from round_rate() to determine_rate()   Brian Masney
    • [PATCH v3 2/9] phy: mediatek: phy-mtk-hdmi-mt2701: convert from round_rate() to determine_rate()   Brian Masney
    • [PATCH v3 3/9] phy: mediatek: phy-mtk-hdmi-mt8173: convert from round_rate() to determine_rate()   Brian Masney
    • [PATCH v3 4/9] phy: mediatek: phy-mtk-hdmi-mt8195: convert from round_rate() to determine_rate()   Brian Masney
    • [PATCH v3 5/9] phy: mediatek: phy-mtk-mipi-dsi-mt8173: convert from round_rate() to determine_rate()   Brian Masney
    • [PATCH v3 6/9] phy: mediatek: phy-mtk-mipi-dsi-mt8183: convert from round_rate() to determine_rate()   Brian Masney
    • [PATCH v3 7/9] phy: rockchip: phy-rockchip-inno-hdmi: convert from round_rate() to determine_rate()   Brian Masney
    • [PATCH v3 8/9] phy: rockchip: phy-rockchip-samsung-hdptx: convert from round_rate() to determine_rate()   Brian Masney
    • [PATCH v3 9/9] phy: ti: phy-j721e-wiz: convert from round_rate() to determine_rate()   Brian Masney
      • [PATCH v3 9/9] phy: ti: phy-j721e-wiz: convert from round_rate() to determine_rate()   Geert Uytterhoeven
    • [PATCH v3 0/9] phy: convert from clk round_rate() to determine_rate()   Vinod Koul
      • [PATCH v3 0/9] phy: convert from clk round_rate() to determine_rate()   Stephen Boyd
• [PATCH 1/1] phy: tegra: xusb: Explicitly configure HS_DISCON_LEVEL to 0x7   Wayne Chang
  • [PATCH 1/1] phy: tegra: xusb: Explicitly configure HS_DISCON_LEVEL to 0x7   Vinod Koul
• [PATCH v3 0/3] Apple Silicon Type-C PHY   Sven Peter
  • [PATCH v3 1/3] soc: apple: Add hardware tunable support   Sven Peter
  • [PATCH v3 2/3] dt-bindings: phy: Add Apple Type-C PHY   Sven Peter
  • [PATCH v3 3/3] phy: apple: Add Apple Type-C PHY   Sven Peter
  • [PATCH v3 0/3] Apple Silicon Type-C PHY   Vinod Koul
• [PATCH v8 00/12] Add DisplayPort support for QCS615 platform   Xiangxu Yin via B4 Relay
  • [PATCH v8 04/12] phy: qcom: qmp-usbc: Add regulator init_load support   Xiangxu Yin via B4 Relay
  • [PATCH v8 05/12] phy: qcom: qmp-usbc: Move reset config into PHY cfg   Xiangxu Yin via B4 Relay
  • [PATCH v8 07/12] phy: qcom: qmp-usbc: Move USB-only init to usb_power_on   Xiangxu Yin via B4 Relay
  • [PATCH v8 08/12] phy: qcom: qmp-usbc: Add TCSR parsing and PHY mode setting   Xiangxu Yin via B4 Relay
  • [PATCH v8 09/12] phy: qcom: qmp-usbc: Add DP PHY ops for USB/DP switchable Type-C PHYs   Xiangxu Yin via B4 Relay
  • [PATCH v8 10/12] phy: qcom: qmp-usbc: Add USB/DP exclude handling   Xiangxu Yin via B4 Relay
  • [PATCH v8 11/12] phy: qcom: qmp: Add DP v2 PHY register definitions   Xiangxu Yin via B4 Relay
  • [PATCH v8 12/12] phy: qcom: qmp-usbc: Add QCS615 USB/DP PHY config and DP mode support   Xiangxu Yin via B4 Relay
  • [PATCH v8 00/12] Add DisplayPort support for QCS615 platform   Vinod Koul
• [PATCH v8 01/12] dt-bindings: phy: Add QMP USB3+DP PHY for QCS615   Xiangxu Yin via B4 Relay
• [PATCH v8 02/12] phy: qcom: qmp-usbc: Rename USB-specific ops to prepare for DP support   Xiangxu Yin via B4 Relay
• [PATCH v8 03/12] phy: qcom: qmp-usbc: Add DP-related fields for USB/DP switchable PHY   Xiangxu Yin via B4 Relay
• [PATCH v8 06/12] phy: qcom: qmp-usbc: add DP link and vco_div clocks for DP PHY   Xiangxu Yin via B4 Relay
• [PATCH v5 0/7] Add generic PHY driver used by MACB/GEM on EyeQ5   Théo Lebrun
  • [PATCH v5 1/7] dt-bindings: soc: mobileye: OLB is an Ethernet PHY provider on EyeQ5   Théo Lebrun
  • [PATCH v5 2/7] phy: Add driver for EyeQ5 Ethernet PHY wrapper   Théo Lebrun
    • [PATCH v5 2/7] phy: Add driver for EyeQ5 Ethernet PHY wrapper   Vinod Koul
  • [PATCH v5 3/7] clk: eyeq: use the auxiliary device creation helper   Théo Lebrun
  • [PATCH v5 4/7] clk: eyeq: add EyeQ5 children auxiliary device for generic PHYs   Théo Lebrun
  • [PATCH v5 5/7] reset: eyeq: drop device_set_of_node_from_dev() done by parent   Théo Lebrun
  • [PATCH v5 6/7] MIPS: mobileye: eyeq5: add two Cadence GEM Ethernet controllers   Théo Lebrun
  • [PATCH v5 7/7] MIPS: mobileye: eyeq5-epm: add two Cadence GEM Ethernet PHYs   Théo Lebrun
• [PATCH v7 0/7] Add ASPEED PCIe Root Complex support   Jacky Chou
  • [PATCH v7 1/7] dt-bindings: phy: aspeed: Add ASPEED PCIe PHY   Jacky Chou
  • [PATCH v7 2/7] dt-bindings: PCI: Add ASPEED PCIe RC support   Jacky Chou
    • [PATCH v7 2/7] dt-bindings: PCI: Add ASPEED PCIe RC support   Rob Herring (Arm)
  • [PATCH v7 3/7] ARM: dts: aspeed-g6: Add PCIe RC and PCIe PHY node   Jacky Chou
  • [PATCH v7 4/7] PHY: aspeed: Add ASPEED PCIe PHY driver   Jacky Chou
    • [PATCH v7 4/7] PHY: aspeed: Add ASPEED PCIe PHY driver   Vinod Koul
      • [PATCH v7 4/7] PHY: aspeed: Add ASPEED PCIe PHY driver   Jacky Chou
  • [PATCH v7 5/7] PCI: Add FMT, TYPE and CPL status definition for TLP header   Jacky Chou
  • [PATCH v7 6/7] PCI: aspeed: Add ASPEED PCIe RC driver   Jacky Chou
  • [PATCH v7 7/7] MAINTAINERS: Add ASPEED PCIe RC driver   Jacky Chou
    • [PATCH v7 7/7] MAINTAINERS: Add ASPEED PCIe RC driver   Manivannan Sadhasivam
  • (subset) [PATCH v7 0/7] Add ASPEED PCIe Root Complex support   Manivannan Sadhasivam
• [PATCH v2 0/2] phy: qcom: qmp-pcie: Add support for Glymur PCIe Gen4x2 PHY   Abel Vesa
  • [PATCH v2 2/2] phy: qcom: qmp-pcie: Add support for Glymur PCIe Gen4x2 PHY   Abel Vesa
    • [PATCH v2 2/2] phy: qcom: qmp-pcie: Add support for Glymur PCIe Gen4x2 PHY   Dmitry Baryshkov
  • [PATCH v2 0/2] phy: qcom: qmp-pcie: Add support for Glymur PCIe Gen4x2 PHY   Vinod Koul
    • [PATCH v2 0/2] phy: qcom: qmp-pcie: Add support for Glymur PCIe Gen4x2 PHY   Abel Vesa
• [PATCH v2 1/2] dt-bindings: phy: sc8280xp-qmp-pcie: Document Glymur PCIe Gen4 2-lanes PHY   Abel Vesa
• [PATCH v3] phy: cadence-torrent: restore parent clock for refclk during resume   Thomas Richard (TI.com)
  • [PATCH v3] phy: cadence-torrent: restore parent clock for refclk during resume   Vinod Koul
• [PATCH RESEND] phy: ti: phy-j721e-wiz: restore mux selection during resume   Thomas Richard (TI.com)
  • [PATCH RESEND] phy: ti: phy-j721e-wiz: restore mux selection during resume   Vinod Koul
• [PATCH 1/1] phy: freescale: imx8qm-hsio: provide regmap names   Alexander Stein
• [PATCH v2 00/12] Add HDMI support for Mediatek Genio 510/700/1200-EVK and Radxa NIO-12L boards   Louis-Alexis Eyraud
  • [PATCH v2 02/12] dt-bindings: phy: mediatek,hdmi-phy: Add support for MT8188 SoC   Louis-Alexis Eyraud
    • [PATCH v2 02/12] dt-bindings: phy: mediatek,hdmi-phy: Add support for MT8188 SoC   Rob Herring (Arm)
  • [PATCH v2 03/12] dt-bindings: phy: mediatek,hdmi-phy: Document extra clocks for MT8195   Louis-Alexis Eyraud
    • [PATCH v2 03/12] dt-bindings: phy: mediatek,hdmi-phy: Document extra clocks for MT8195   Rob Herring (Arm)
  • [PATCH v2 04/12] arm64: dts: mediatek: mt8195: Add DPI1, HDMI, HDMI PHY/DDC nodes   Louis-Alexis Eyraud
  • [PATCH v2 05/12] arm64: dts: mediatek: mt8188: Add DPI1, HDMI, HDMI PHY/DDC nodes   Louis-Alexis Eyraud
  • [PATCH v2 06/12] arm64: dts: mediatek: mt8390-genio-common: Enable HDMI output   Louis-Alexis Eyraud
  • [PATCH v2 07/12] arm64: dts: mediatek: mt8390-genio-common: Add HDMI sound output support   Louis-Alexis Eyraud
  • [PATCH v2 08/12] arm64: dts: mediatek: mt8395-radxa-nio-12l: Enable HDMI output   Louis-Alexis Eyraud
  • [PATCH v2 09/12] arm64: dts: mediatek: mt8395-radxa-nio-12l: Add HDMI sound output support   Louis-Alexis Eyraud
  • [PATCH v2 10/12] arm64: dts: mediatek: mt8395-genio-common: Enable HDMI output   Louis-Alexis Eyraud
  • [PATCH v2 11/12] arm64: dts: mediatek: mt8395-genio-common: Add HDMI sound output support   Louis-Alexis Eyraud
  • [PATCH v2 12/12] arm64: defconfig: Enable Mediatek HDMIv2 driver   Louis-Alexis Eyraud
  • (subset) [PATCH v2 00/12] Add HDMI support for Mediatek Genio 510/700/1200-EVK and Radxa NIO-12L boards   Vinod Koul
• [PATCH v2 01/12] dt-bindings: phy: mediatek,hdmi-phy: Fix clock output names for MT8195   Louis-Alexis Eyraud
• [PATCH] phy: qcom-qmp-usb: Set regulator load before enabling   Faisal Hassan
  • [PATCH] phy: qcom-qmp-usb: Set regulator load before enabling   Vinod Koul
• [PATCH v4 00/25] MediaTek UFS Cleanup and MT8196 Enablement   Nicolas Frattaroli
  • [PATCH v4 01/25] dt-bindings: phy: Add mediatek,mt8196-ufsphy variant   Nicolas Frattaroli
    • [PATCH v4 01/25] dt-bindings: phy: Add mediatek,mt8196-ufsphy variant   Conor Dooley
    • [PATCH v4 01/25] dt-bindings: phy: Add mediatek,mt8196-ufsphy variant   Vinod Koul
  • [PATCH v4 02/25] dt-bindings: ufs: mediatek,ufs: Complete the binding   Nicolas Frattaroli
    • [PATCH v4 02/25] dt-bindings: ufs: mediatek,ufs: Complete the binding   Conor Dooley
    • [PATCH v4 02/25] dt-bindings: ufs: mediatek,ufs: Complete the binding   Vinod Koul
  • [PATCH v4 03/25] dt-bindings: ufs: mediatek,ufs: Add mt8196 variant   Nicolas Frattaroli
    • [PATCH v4 03/25] dt-bindings: ufs: mediatek,ufs: Add mt8196 variant   Conor Dooley
    • [PATCH v4 03/25] dt-bindings: ufs: mediatek,ufs: Add mt8196 variant   Vinod Koul
  • [PATCH v4 04/25] scsi: ufs: mediatek: Move MTK_SIP_UFS_CONTROL to mtk_sip_svc.h   Nicolas Frattaroli
  • [PATCH v4 05/25] phy: mediatek: ufs: Add support for resets   Nicolas Frattaroli
    • [PATCH v4 05/25] phy: mediatek: ufs: Add support for resets   Vinod Koul
  • [PATCH v4 06/25] scsi: ufs: mediatek: Rework resets   Nicolas Frattaroli
  • [PATCH v4 07/25] scsi: ufs: mediatek: Rework 0.9V regulator   Nicolas Frattaroli
    • [PATCH v4 07/25] scsi: ufs: mediatek: Rework 0.9V regulator   Nicolas Frattaroli
  • [PATCH v4 08/25] scsi: ufs: mediatek: Rework init function   Nicolas Frattaroli
  • [PATCH v4 09/25] scsi: ufs: mediatek: Rework the crypt-boost stuff   Nicolas Frattaroli
  • [PATCH v4 10/25] scsi: ufs: mediatek: Handle misc host voltage regulators   Nicolas Frattaroli
  • [PATCH v4 11/25] scsi: ufs: mediatek: Rework probe function   Nicolas Frattaroli
  • [PATCH v4 12/25] scsi: ufs: mediatek: Remove vendor kernel quirks cruft   Nicolas Frattaroli
  • [PATCH v4 13/25] scsi: ufs: mediatek: Use the common PHY framework   Nicolas Frattaroli
  • [PATCH v4 14/25] scsi: ufs: mediatek: Switch to newer PM ops helpers   Nicolas Frattaroli
  • [PATCH v4 15/25] scsi: ufs: mediatek: Remove mediatek,ufs-broken-rtc property   Nicolas Frattaroli
  • [PATCH v4 16/25] scsi: ufs: mediatek: Rework _ufs_mtk_clk_scale error paths   Nicolas Frattaroli
  • [PATCH v4 17/25] scsi: ufs: mediatek: Add vendor prefix to clk-scale-up-vcore-min   Nicolas Frattaroli
  • [PATCH v4 18/25] scsi: ufs: mediatek: Clean up logging prints   Nicolas Frattaroli
  • [PATCH v4 19/25] scsi: ufs: mediatek: Rework ufs_mtk_wait_idle_state   Nicolas Frattaroli
  • [PATCH v4 20/25] scsi: ufs: mediatek: Don't acquire dvfsrc-vcore twice   Nicolas Frattaroli
  • [PATCH v4 21/25] scsi: ufs: mediatek: Rework hardware version reading   Nicolas Frattaroli
  • [PATCH v4 22/25] scsi: ufs: mediatek: Back up idle timer in per-instance struct   Nicolas Frattaroli
  • [PATCH v4 23/25] scsi: ufs: mediatek: Make scale_us in setup_clk_gating const   Nicolas Frattaroli
  • [PATCH v4 24/25] scsi: ufs: mediatek: Remove ret local from link_startup_notify   Nicolas Frattaroli
  • [PATCH v4 25/25] scsi: ufs: mediatek: Add MT8196 compatible, update copyright   Nicolas Frattaroli
  • [PATCH v4 00/25] MediaTek UFS Cleanup and MT8196 Enablement   AngeloGioacchino Del Regno
• [PATCH v7 0/5] Introduce SpacemiT K1 PCIe phy support   Alex Elder
  • [PATCH v7 1/5] dt-bindings: phy: spacemit: Add SpacemiT PCIe/combo PHY   Alex Elder
  • [PATCH v7 2/5] dt-bindings: phy: spacemit: Introduce PCIe PHY   Alex Elder
  • [PATCH v7 3/5] phy: spacemit: Introduce PCIe/combo PHY   Alex Elder
  • [PATCH v7 0/5] Introduce SpacemiT K1 PCIe phy support   Yixun Lan
  • [PATCH v7 0/5] Introduce SpacemiT K1 PCIe phy support   Alex Elder
  • (subset) [PATCH v7 0/5] Introduce SpacemiT K1 PCIe phy support   Vinod Koul
  • (subset) [PATCH v7 0/5] Introduce SpacemiT K1 PCIe phy support   Yixun Lan
• [PATCH v1] phy: fsl-imx8mq-usb: Fix PCS_TX_SWING_FULL register configuration   Stefano Radaelli
  • [PATCH v1] phy: fsl-imx8mq-usb: Fix PCS_TX_SWING_FULL register configuration   Fabio Estevam
    • [PATCH v1] phy: fsl-imx8mq-usb: Fix PCS_TX_SWING_FULL register configuration   Stefano Radaelli
• [PATCH v2] phy: fsl-imx8mq-usb: Clear the PCS_TX_SWING_FULL field before using it   Stefano Radaelli
  • [PATCH v2] phy: fsl-imx8mq-usb: Clear the PCS_TX_SWING_FULL field before using it   Xu Yang
  • [PATCH v2] phy: fsl-imx8mq-usb: Clear the PCS_TX_SWING_FULL field before using it   Frank Li
• [PATCH] phy: fsl-imx8mq-usb: add debugfs to access control register   Xu Yang
  • [PATCH] phy: fsl-imx8mq-usb: add debugfs to access control register   Daniel Baluta
    • [PATCH] phy: fsl-imx8mq-usb: add debugfs to access control register   Xu Yang
  • [PATCH] phy: fsl-imx8mq-usb: add debugfs to access control register   Vinod Koul
    • [PATCH] phy: fsl-imx8mq-usb: add debugfs to access control register   Xu Yang
• [PATCH] phy: fsl-imx8mq-usb: change ssc_range value for i.MX8MQ   Xu Yang
  • [PATCH] phy: fsl-imx8mq-usb: change ssc_range value for i.MX8MQ   Frank Li
  • [PATCH] phy: fsl-imx8mq-usb: change ssc_range value for i.MX8MQ   Vinod Koul
• [PATCH] phy: fsl-imx8mq-usb: enable RxTermination_override_sel   Xu Yang
  • [PATCH] phy: fsl-imx8mq-usb: enable RxTermination_override_sel   Frank Li
    • [PATCH] phy: fsl-imx8mq-usb: enable RxTermination_override_sel   Xu Yang
• [PATCH v4] phy: qcom-qusb2: Fix NULL pointer dereference on early suspend   Loic Poulain
  • [PATCH v4] phy: qcom-qusb2: Fix NULL pointer dereference on early suspend   Vinod Koul
• [PATCH v3] phy: fsl-imx8mq-usb: Clear the PCS_TX_SWING_FULL field before using it   Stefano Radaelli
  • [PATCH v3] phy: fsl-imx8mq-usb: Clear the PCS_TX_SWING_FULL field before using it   Fabio Estevam
  • [PATCH v3] phy: fsl-imx8mq-usb: Clear the PCS_TX_SWING_FULL field before using it   Ahmad Fatoum
  • [PATCH v3] phy: fsl-imx8mq-usb: Clear the PCS_TX_SWING_FULL field before using it   Vinod Koul
• [PATCH v3 0/3] Add eusb2 repeater squelch detect parameter override   Krishna Kurapati
  • [PATCH v3 1/3] dt-bindings: phy: qcom,snps-eusb2-repeater: Add squelch param update   Krishna Kurapati
    • [PATCH v3 1/3] dt-bindings: phy: qcom,snps-eusb2-repeater: Add squelch param update   Vinod Koul
      • [PATCH v3 1/3] dt-bindings: phy: qcom,snps-eusb2-repeater: Add squelch param update   Krzysztof Kozlowski
      • [PATCH v3 1/3] dt-bindings: phy: qcom,snps-eusb2-repeater: Add squelch param update   Vinod Koul
      • [PATCH v3 1/3] dt-bindings: phy: qcom,snps-eusb2-repeater: Add squelch param update   Dmitry Baryshkov
      • [PATCH v3 1/3] dt-bindings: phy: qcom,snps-eusb2-repeater: Add squelch param update   Vinod Koul
      • [PATCH v3 1/3] dt-bindings: phy: qcom,snps-eusb2-repeater: Add squelch param update   Dmitry Baryshkov
  • [PATCH v3 2/3] phy: qualcomm: phy-qcom-eusb2-repeater: Add squelch detect param update   Krishna Kurapati
    • [PATCH v3 2/3] phy: qualcomm: phy-qcom-eusb2-repeater: Add squelch detect param update   Abel Vesa
    • [PATCH v3 2/3] phy: qualcomm: phy-qcom-eusb2-repeater: Add squelch detect param update   Konrad Dybcio
  • [PATCH v3 3/3] arm64: dts: qcom: sm8750-mtp: Add eusb2 repeater tuning parameters   Krishna Kurapati
    • [PATCH v3 3/3] arm64: dts: qcom: sm8750-mtp: Add eusb2 repeater tuning parameters   Konrad Dybcio
  • [PATCH v3 0/3] Add eusb2 repeater squelch detect parameter override   Vinod Koul
• [PATCH v2 0/2] Fixup HDMI PLL for phy-rockchip-samsung-hdptx   Cristian Ciocaltea
  • [PATCH v2 1/2] phy: rockchip: samsung-hdptx: Pre-compute HDMI PLL config for 461.10125 MHz output   Cristian Ciocaltea
  • [PATCH v2 0/2] Fixup HDMI PLL for phy-rockchip-samsung-hdptx   Vinod Koul
• [PATCH v2 2/2] phy: rockchip: samsung-hdptx: Cleanup TMDS PLL config table   Cristian Ciocaltea
• [PATCH v5 00/11] Add HDMI 2.1 FRL support to phy-rockchip-samsung-hdptx   Cristian Ciocaltea
  • [PATCH v5 01/11] phy: hdmi: Add HDMI 2.1 FRL configuration options   Cristian Ciocaltea
  • [PATCH v5 02/11] phy: rockchip: samsung-hdptx: Use usleep_range() instead of udelay()   Cristian Ciocaltea
  • [PATCH v5 03/11] phy: rockchip: samsung-hdptx: Fix coding style alignment   Cristian Ciocaltea
  • [PATCH v5 04/11] phy: rockchip: samsung-hdptx: Consistently use [rk_]hdptx_[tmds_] prefixes   Cristian Ciocaltea
  • [PATCH v5 05/11] phy: rockchip: samsung-hdptx: Enable lane output in common helper   Cristian Ciocaltea
  • [PATCH v5 06/11] phy: rockchip: samsung-hdptx: Cleanup *_cmn_init_seq lists   Cristian Ciocaltea
  • [PATCH v5 07/11] phy: rockchip: samsung-hdptx: Compute clk rate from PLL config   Cristian Ciocaltea
  • [PATCH v5 08/11] phy: rockchip: samsung-hdptx: Drop hw_rate driver data   Cristian Ciocaltea
  • [PATCH v5 09/11] phy: rockchip: samsung-hdptx: Switch to driver specific HDMI config   Cristian Ciocaltea
  • [PATCH v5 10/11] phy: rockchip: samsung-hdptx: Extend rk_hdptx_phy_verify_hdmi_config() helper   Cristian Ciocaltea
  • [PATCH v5 11/11] phy: rockchip: samsung-hdptx: Add HDMI 2.1 FRL support   Cristian Ciocaltea
• [PATCH 0/8] Add Axiado AX3000 eMMC Host Controller Support   Tzu-Hao Wei
  • [PATCH 1/8] dt-bindings: phy: axiado,ax3000-emmc-phy: add Axiado eMMC PHY document   Tzu-Hao Wei
    • [PATCH 1/8] dt-bindings: phy: axiado,ax3000-emmc-phy: add Axiado eMMC PHY document   Krzysztof Kozlowski
    • [PATCH 1/8] dt-bindings: phy: axiado,ax3000-emmc-phy: add Axiado eMMC PHY document   Krzysztof Kozlowski
  • [PATCH 2/8] phy: axiado: add Arasan eMMC-PHY for Axiado   Tzu-Hao Wei
    • [PATCH 2/8] phy: axiado: add Arasan eMMC-PHY for Axiado   Krzysztof Kozlowski
  • [PATCH 3/8] arm64: dts: axiado: Add eMMC-PHY node support   Tzu-Hao Wei
  • [PATCH 4/8] MAINTAINERS: Update entry for Axiado eMMC PHY   Tzu-Hao Wei
  • [PATCH 5/8] dt-bindings: mmc: axiado: Add axiado eMMC variant   Tzu-Hao Wei
    • [PATCH 5/8] dt-bindings: mmc: axiado: Add axiado eMMC variant   Krzysztof Kozlowski
    • [PATCH 5/8] dt-bindings: mmc: axiado: Add axiado eMMC variant   Krzysztof Kozlowski
  • [PATCH 6/8] mmc: host: axiado: add AX3000 eMMC PHY support to sdhci-of-arasan   Tzu-Hao Wei
    • [PATCH 6/8] mmc: host: axiado: add AX3000 eMMC PHY support to sdhci-of-arasan   Krzysztof Kozlowski
  • [PATCH 7/8] arm64: dts: axiado: add common sdhci host node in dtsi   Tzu-Hao Wei
  • [PATCH 8/8] arm64: dts: axiado: enable sdhci host   Tzu-Hao Wei
    • [PATCH 8/8] arm64: dts: axiado: enable sdhci host   Krzysztof Kozlowski
  • [PATCH 0/8] Add Axiado AX3000 eMMC Host Controller Support   Krzysztof Kozlowski
• [PATCH v6 00/14] Add USB2.0 support for RZ/G3E   Tommaso Merciai
  • [PATCH v6 01/14] dt-bindings: mux: Remove nodename pattern constraints   Tommaso Merciai
  • [PATCH v6 02/14] mux: Add driver for Renesas RZ/V2H USB VBENCTL VBUS_SEL mux   Tommaso Merciai
  • [PATCH v6 03/14] dt-bindings: reset: renesas,rzv2h-usb2phy: Add '#mux-state-cells' property   Tommaso Merciai
  • [PATCH v6 04/14] dt-bindings: reset: renesas,rzv2h-usb2phy: Document RZ/G3E USB2PHY reset   Tommaso Merciai
  • [PATCH v6 05/14] reset: rzv2h-usb2phy: Keep PHY clock enabled for entire device lifetime   Tommaso Merciai
  • [PATCH v6 06/14] reset: rzv2h-usb2phy: Add support for VBUS mux controller registration   Tommaso Merciai
  • [PATCH v6 07/14] dt-bindings: phy: renesas,usb2-phy: Document USB VBUS regulator   Tommaso Merciai
  • [PATCH v6 08/14] dt-bindings: phy: renesas,usb2-phy: Document mux-states property   Tommaso Merciai
  • [PATCH v6 09/14] dt-bindings: phy: renesas,usb2-phy: Document RZ/G3E SoC   Tommaso Merciai
  • [PATCH v6 10/14] phy: renesas: rcar-gen3-usb2: Factor out VBUS control logic   Tommaso Merciai
  • [PATCH v6 11/14] phy: renesas: rcar-gen3-usb2: Use devm_pm_runtime_enable()   Tommaso Merciai
  • [PATCH v6 12/14] phy: renesas: rcar-gen3-usb2: Add regulator for OTG VBUS control   Tommaso Merciai
  • [PATCH v6 13/14] phy: renesas: rcar-gen3-usb2: Use mux-state for phyrst management   Tommaso Merciai
  • [PATCH v6 14/14] dt-bindings: usb: renesas,usbhs: Add RZ/G3E SoC support   Tommaso Merciai
• [PATCH v2] dt-bindings: phy: renesas,rzg3e-usb3-phy: Add RZ/V2H(P) and RZ/V2N support   Prabhakar
  • [PATCH v2] dt-bindings: phy: renesas,rzg3e-usb3-phy: Add RZ/V2H(P) and RZ/V2N support   Vinod Koul
• [PATCH v1 13/23] phy: freescale: Discard pm_runtime_put() return value   Rafael J. Wysocki
• [PATCH v1 14/23] phy: rockchip-samsung-dcphy: Discard pm_runtime_put() return value   Rafael J. Wysocki
• [PATCH v1 15/23] phy: core: Discard pm_runtime_put() return values   Rafael J. Wysocki
  • [PATCH v1 15/23] phy: core: Discard pm_runtime_put() return values   Geert Uytterhoeven
    • [PATCH v1 15/23] phy: core: Discard pm_runtime_put() return values   Geert Uytterhoeven
      • [PATCH v1 15/23] phy: core: Discard pm_runtime_put() return values   Geert Uytterhoeven
      • [PATCH v1 15/23] phy: core: Discard pm_runtime_put() return values   Rafael J. Wysocki
      • [PATCH v1 15/23] phy: core: Discard pm_runtime_put() return values   Rafael J. Wysocki
• [PATCH v9 0/2] Add Google Tensor SoC USB PHY support   Roy Luo
  • [PATCH v9 1/2] dt-bindings: phy: google: Add Google Tensor G5 USB PHY   Roy Luo
  • [PATCH v9 2/2] phy: Add Google Tensor SoC USB PHY driver   Roy Luo
    • [PATCH v9 2/2] phy: Add Google Tensor SoC USB PHY driver   Vinod Koul
      • [PATCH v9 2/2] phy: Add Google Tensor SoC USB PHY driver   Roy Luo
      • [PATCH v9 2/2] phy: Add Google Tensor SoC USB PHY driver   Vinod Koul
      • [PATCH v9 2/2] phy: Add Google Tensor SoC USB PHY driver   Roy Luo
• [PATCH v15 0/6] pci: qcom: Add QCS8300 PCIe support   Manivannan Sadhasivam
• [PATCH v2] phy: fsl-imx8mq-usb: fix typec orientation switch when built as module   Francesco Dolcini
  • [PATCH v2] phy: fsl-imx8mq-usb: fix typec orientation switch when built as module   Vinod Koul
• [PATCH v5 0/8] arm64: dts: mediatek: Add Openwrt One AP functionality   Sjoerd Simons
  • [PATCH v5 2/8] arm64: dts: mediatek: mt7981b: Add PCIe and USB support   Sjoerd Simons
  • [PATCH v5 4/8] arm64: dts: mediatek: mt7981b: Add Ethernet and WiFi offload support   Sjoerd Simons
  • [PATCH v5 5/8] arm64: dts: mediatek: mt7981b-openwrt-one: Enable Ethernet   Sjoerd Simons
  • [PATCH v5 7/8] arm64: dts: mediatek: mt7981b: Add wifi memory region   Sjoerd Simons
  • [PATCH v5 8/8] arm64: dts: mediatek: mt7981b-openwrt-one: Enable wifi   Sjoerd Simons
• [PATCH v5 1/8] dt-bindings: PCI: mediatek-gen3: Add MT7981 PCIe compatible   Sjoerd Simons
• [PATCH v5 3/8] arm64: dts: mediatek: mt7981b-openwrt-one: Enable PCIe and USB   Sjoerd Simons
• [PATCH v5 6/8] arm64: dts: mediatek: mt7981b: Disable wifi by default   Sjoerd Simons
• [PATCH] phy: freescale: imx8m-pcie: assert phy reset during power on   Rafael Beims
• (subset) [PATCH v6 0/6] pci: qcom: Add QCS8300 PCIe support   Vinod Koul
• (subset) [PATCH v7 0/5] pci: qcom: Add QCS8300 PCIe support   Vinod Koul
• (subset) [PATCH v8 0/5] pci: qcom: Add QCS8300 PCIe support   Vinod Koul
• (subset) [PATCH v10 0/5] pci: qcom: Add QCS8300 PCIe support   Vinod Koul
• (subset) [PATCH v11 0/5] pci: qcom: Add QCS8300 PCIe support   Vinod Koul
• (subset) [PATCH v15 0/6] pci: qcom: Add QCS8300 PCIe support   Vinod Koul
• [PATCH v2] phy: ti: da8xx-usb: Handle devm_pm_runtime_enable() errors   Vinod Koul
• [PATCH v2 0/2] phy: rockchip: inno-usb2: fix gadget mode disconnection after 6 seconds   Vinod Koul
• [PATCH v3 0/5] Add PCIe support for Kaanapali   Vinod Koul
• [PATCH v4 0/5] Add PCIe support for Kaanapali   Vinod Koul
• [PATCH v10 0/6] initial usbdrd phy support for Exynosautov920 soc   Vinod Koul
• [PATCH v5 phy 00/15] Lynx 28G improvements part 1   Vinod Koul
• [PATCH 1/1] phy: rockchip: naneng-combphy: use existing DT property check for rk3528   Vinod Koul
• [PATCH 0/2] Cadence: Torrent: Enable PCIe + XAUI multilink configuration   Siddharth Vadapalli
  • [PATCH 1/2] dt-bindings: phy: Add PHY_TYPE_XAUI definition   Siddharth Vadapalli
    • [PATCH 1/2] dt-bindings: phy: Add PHY_TYPE_XAUI definition   Krzysztof Kozlowski
  • [PATCH 2/2] phy: cadence-torrent: Add PCIe + XAUI multilink configuration for 100MHz refclk   Siddharth Vadapalli
• [PATCH v2 0/2] dt-bindings: phy: add power-domains to samsung UFS and USB phys   André Draszik
  • [PATCH v2 1/2] dt-bindings: phy: samsung,ufs-phy: add power-domains   André Draszik
  • [PATCH v2 0/2] dt-bindings: phy: add power-domains to samsung UFS and USB phys   Vinod Koul
• [PATCH v2 2/2] dt-bindings: phy: samsung,usb3-drd-phy: add power-domains   André Draszik
• [PATCH 0/5] Add calibration for Synopsys PCIe PHY and Controller   Shawn Lin
  • [PATCH 1/5] PCI: dw-rockchip: Add phy_calibrate() to check PHY lock status   Shawn Lin
  • [PATCH 2/5] phy: rockchip-snps-pcie3: Add phy_calibrate() support   Shawn Lin
  • [PATCH 3/5] phy: rockchip-snps-pcie3: Increase sram init timeout   Shawn Lin
  • [PATCH 4/5] phy: rockchip-snps-pcie3: Check more sram init status for RK3588   Shawn Lin
  • [PATCH 5/5] phy: rockchip-snps-pcie3: Only check PHY1 status when using it   Shawn Lin
• [PATCH v3 0/2] phy: qcom: qmp-pcie: Add support for Glymur PCIe Gen4x2 PHY   Abel Vesa
  • [PATCH v3 1/2] dt-bindings: phy: sc8280xp-qmp-pcie: Document Glymur PCIe Gen4 2-lanes PHY   Abel Vesa
  • [PATCH v3 2/2] phy: qcom: qmp-pcie: Add support for Glymur PCIe Gen4x2 PHY   Abel Vesa
• [PATCH RESEND v5 0/3] phy: qcom: edp: Add missing ref clock to x1e80100   Abel Vesa
  • [PATCH RESEND v5 1/3] dt-bindings: phy: qcom-edp: Add missing clock for X Elite   Abel Vesa
  • [PATCH RESEND v5 2/3] phy: qcom: edp: Make the number of clocks flexible   Abel Vesa
  • [PATCH RESEND v5 3/3] arm64: dts: qcom: x1e80100: Add missing TCSR ref clock to the DP PHYs   Abel Vesa
• [PATCH RESEND v6 0/4] phy: qcom: edp: Add support for Glymur platform   Abel Vesa
  • [PATCH RESEND v6 1/4] dt-bindings: phy: Add DP PHY compatible for Glymur   Abel Vesa
  • [PATCH RESEND v6 2/4] phy: qcom: edp: Fix the DP_PHY_AUX_CFG registers count   Abel Vesa
  • [PATCH RESEND v6 3/4] phy: qcom-qmp: qserdes-com: Add v8 DP-specific qserdes register offsets   Abel Vesa
  • [PATCH RESEND v6 4/4] phy: qcom: edp: Add Glymur platform support   Abel Vesa
• [PATCH v2] phy: fsl-imx8mq-usb: add debugfs to access control register   Xu Yang
  • [PATCH v2] phy: fsl-imx8mq-usb: add debugfs to access control register   Andrew Lunn
• [PATCH v2] phy: fsl-imx8mq-usb: enable RxTermination_override_sel   Xu Yang
• [PATCH] phy: broadcom: ns-usb3: Fix Wvoid-pointer-to-enum-cast warning (again)   Krzysztof Kozlowski
• [PATCH 1/3] phy: rockchip: usb: Simplify with scoped for each OF child loop   Krzysztof Kozlowski
  • [PATCH 2/3] phy: core: Simplify with scoped for each OF child loop   Krzysztof Kozlowski
  • [PATCH 3/3] phy: renesas: rcar-gen2: Simplify with scoped for each OF child loop   Krzysztof Kozlowski
• [PATCH] phy: rockchip: inno-usb2: Fix a double free bug in rockchip_usb2phy_probe()   Wentao Liang
  • [PATCH] phy: rockchip: inno-usb2: Fix a double free bug in rockchip_usb2phy_probe()   Markus Elfring
• [PATCH] phy: Kconfig: spacemit: add COMMON_CLK dependency   Alex Elder
  • [PATCH] phy: Kconfig: spacemit: add COMMON_CLK dependency   Javier Martinez Canillas
  • [PATCH] phy: Kconfig: spacemit: add COMMON_CLK dependency   Vinod Koul
    • [PATCH] phy: Kconfig: spacemit: add COMMON_CLK dependency   Alex Elder
• [PATCH v10 0/2] Add Google Tensor SoC USB PHY support   Roy Luo
  • [PATCH v10 1/2] dt-bindings: phy: google: Add Google Tensor G5 USB PHY   Roy Luo
  • [PATCH v10 2/2] phy: Add Google Tensor SoC USB PHY driver   Roy Luo
• [PATCH v6 0/2] Add USB2.0 PHY support for SpacemiT K1   Junzhong Pan
  • [PATCH v6 0/2] Add USB2.0 PHY support for SpacemiT K1   Aurelien Jarno
• [PATCH net-next 0/9] XPCS polarity inversion via generic device tree properties   Bjørn Mork
• [PATCH V1 0/4] Add UFS support for Hamoa SoC   Pradeep P V K
  • [PATCH V1 1/4] scsi: ufs: phy: dt-bindings: Add QMP UFS PHY compatible for Hamoa   Pradeep P V K
    • [PATCH V1 1/4] scsi: ufs: phy: dt-bindings: Add QMP UFS PHY compatible for Hamoa   Krzysztof Kozlowski
      • [PATCH V1 1/4] scsi: ufs: phy: dt-bindings: Add QMP UFS PHY compatible for Hamoa   Pradeep Pragallapati
      • [PATCH V1 1/4] scsi: ufs: phy: dt-bindings: Add QMP UFS PHY compatible for Hamoa   Krzysztof Kozlowski
      • [PATCH V1 1/4] scsi: ufs: phy: dt-bindings: Add QMP UFS PHY compatible for Hamoa   Krzysztof Kozlowski
    • [PATCH V1 1/4] scsi: ufs: phy: dt-bindings: Add QMP UFS PHY compatible for Hamoa   Konrad Dybcio
      • [PATCH V1 1/4] scsi: ufs: phy: dt-bindings: Add QMP UFS PHY compatible for Hamoa   Pradeep Pragallapati
  • [PATCH V1 2/4] scsi: ufs: qcom: dt-bindings: Add UFSHC compatible for Hamoa   Pradeep P V K
    • [PATCH V1 2/4] scsi: ufs: qcom: dt-bindings: Add UFSHC compatible for Hamoa   Krzysztof Kozlowski
      • [PATCH V1 2/4] scsi: ufs: qcom: dt-bindings: Add UFSHC compatible for Hamoa   Krzysztof Kozlowski
      • [PATCH V1 2/4] scsi: ufs: qcom: dt-bindings: Add UFSHC compatible for Hamoa   Pradeep Pragallapati
    • [PATCH V1 2/4] scsi: ufs: qcom: dt-bindings: Add UFSHC compatible for Hamoa   Rob Herring (Arm)
  • [PATCH V1 3/4] arm64: dts: qcom: hamoa: Add UFS nodes for hamoa SoC   Pradeep P V K
    • [PATCH V1 3/4] arm64: dts: qcom: hamoa: Add UFS nodes for hamoa SoC   Konrad Dybcio
      • [PATCH V1 3/4] arm64: dts: qcom: hamoa: Add UFS nodes for hamoa SoC   Pradeep Pragallapati
  • [PATCH V1 4/4] arm64: dts: qcom: hamoa-iot-evk: Enable UFS   Pradeep P V K
    • [PATCH V1 4/4] arm64: dts: qcom: hamoa-iot-evk: Enable UFS   Konrad Dybcio
      • [PATCH V1 4/4] arm64: dts: qcom: hamoa-iot-evk: Enable UFS   Pradeep Pragallapati
      • [PATCH V1 4/4] arm64: dts: qcom: hamoa-iot-evk: Enable UFS   Konrad Dybcio
      • [PATCH V1 4/4] arm64: dts: qcom: hamoa-iot-evk: Enable UFS   Konrad Dybcio
  • [PATCH V1 0/4] Add UFS support for Hamoa SoC   Rob Herring
• [PATCH v4 0/7] mmc: host: renesas_sdhi_core: support configuring an optional sdio mux   Josua Mayer
  • [PATCH v4 2/7] mux: Add helper functions for getting optional and selected mux-state   Josua Mayer
    • [PATCH v4 2/7] mux: Add helper functions for getting optional and selected mux-state   kernel test robot
  • [PATCH v4 3/7] mux: add help text for MULTIPLEXER config option   Josua Mayer
  • [PATCH v4 4/7] phy: can-transceiver: drop temporary helper getting optional mux-state   Josua Mayer
  • [PATCH v4 5/7] i2c: omap: switch to new generic helper for getting selected mux-state   Josua Mayer
  • [PATCH v4 6/7] dt-bindings: mmc: renesas,sdhi: Add mux-states property   Josua Mayer
  • [PATCH v4 7/7] mmc: host: renesas_sdhi_core: support selecting an optional mux   Josua Mayer
• [PATCH v4 1/7] phy: can-transceiver: rename temporary helper function to avoid conflict   Josua Mayer
• [PATCH 0/5] Add USB support for Canaan K230   Jiayu Du
  • [PATCH 5/5] riscv: dts: canaan: Add syscon and USB nodes for K230   Jiayu Du
• [PATCH 1/5] dt-bindings: phy: Add Canaan K230 USB2.0 PHY DT schema   Jiayu Du
  • [PATCH 1/5] dt-bindings: phy: Add Canaan K230 USB2.0 PHY DT schema   Krzysztof Kozlowski
    • [PATCH 1/5] dt-bindings: phy: Add Canaan K230 USB2.0 PHY DT schema   Jiayu Du
• [PATCH 2/5] dt-bindings: soc: canaan: Add top syscon for Canaan K230 SoC   Jiayu Du
  • [PATCH 2/5] dt-bindings: soc: canaan: Add top syscon for Canaan K230 SoC   Rob Herring (Arm)
  • [PATCH 2/5] dt-bindings: soc: canaan: Add top syscon for Canaan K230 SoC   Krzysztof Kozlowski
    • [PATCH 2/5] dt-bindings: soc: canaan: Add top syscon for Canaan K230 SoC   Jiayu Du
      • [PATCH 2/5] dt-bindings: soc: canaan: Add top syscon for Canaan K230 SoC   Krzysztof Kozlowski
• [PATCH 3/5] dt-bindings: usb: dwc2: Add support for Canaan K230 SoC   Jiayu Du
  • [PATCH 3/5] dt-bindings: usb: dwc2: Add support for Canaan K230 SoC   Rob Herring (Arm)
• [PATCH 4/5] phy: usb: Add driver for Canaan K230 USB 2.0 PHY   Jiayu Du
• [PATCH v8 0/4] Add ASPEED PCIe PHY support   Jacky Chou
  • [PATCH v8 1/4] dt-bindings: phy: aspeed: Add ASPEED PCIe PHY   Jacky Chou
  • [PATCH v8 2/4] ARM: dts: aspeed-g6: Add PCIe RC and PCIe PHY node   Jacky Chou
  • [PATCH v8 3/4] phy: aspeed: Add ASPEED PCIe PHY driver   Jacky Chou
  • [PATCH v8 4/4] MAINTAINERS: Add ASPEED PCIe PHY driver   Jacky Chou
• [PATCH] phy: adjust function name reference   Julia Lawall
  • [PATCH] phy: adjust function name reference   Daniel Golle
• [PATCH] phy: renesas: phy-rcar-gen2: fix typo in function name reference   Julia Lawall
  • [PATCH] phy: renesas: phy-rcar-gen2: fix typo in function name reference   Geert Uytterhoeven
• [PATCH] phy: core: Reinstate pm_runtime_enabled() check in phy_pm_runtime_put()   Geert Uytterhoeven
  • [PATCH] phy: core: Reinstate pm_runtime_enabled() check in phy_pm_runtime_put()   Wysocki, Rafael J
• [PATCH V2 0/4] Add UFS support for x1e80100 SoC   Pradeep P V K
  • [PATCH V2 1/4] dt-bindings: phy: Add QMP UFS PHY compatible for x1e80100   Pradeep P V K
  • [PATCH V2 2/4] scsi: ufs: qcom: dt-bindings: Document UFSHC compatible for x1e80100   Pradeep P V K
  • [PATCH V2 3/4] arm64: dts: qcom: hamoa: Add UFS nodes for x1e80100 SoC   Pradeep P V K
    • [PATCH V2 3/4] arm64: dts: qcom: hamoa: Add UFS nodes for x1e80100 SoC   Konrad Dybcio
  • [PATCH V2 4/4] arm64: dts: qcom: hamoa-iot-evk: Enable UFS   Pradeep P V K
    • [PATCH V2 4/4] arm64: dts: qcom: hamoa-iot-evk: Enable UFS   Konrad Dybcio

Last message date: Wed Dec 31 11:18:51 PST 2025
Archived on: Wed Dec 31 11:19:28 PST 2025

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...