[PATCH v2] dt-bindings: phy: ti,tcan104x-can: Document TI TCAN1046

[Conor Dooley]

On Wed, Dec 10, 2025 at 08:52:58AM +0100, Marc Kleine-Budde wrote:
> On 09.12.2025 16:21:19, Prabhakar wrote:
> > From: Lad Prabhakar <prabhakar.mahadev-lad.rj at bp.renesas.com>
> >
> > Document the TI TCAN1046 automotive CAN transceiver. The TCAN1046 is a
> > dual high-speed CAN transceiver with sleep-mode support and no EN pin,
> > mirroring the behaviour of the NXP TJA1048, which also provides dual
> > channels and STB1/2 sleep-control lines.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj at bp.renesas.com>
> > ---
> > TCAN 1046, https://www.ti.com/lit/ds/symlink/tcan1046v-q1.pdf?ts=1765297159307&ref_url=https%253A%252F%252Fwww.ti.com%252Fproduct%252FTCAN1046V-Q1
> > NXP TJA1048, https://www.nxp.com/docs/en/data-sheet/TJA1048.pdf
> 
> The polarity of the standby line of the chips is different.
> 
> You must set the correct active high/low property for the GPIO, as the
> driver uses logical levels.
> 
> Reviewed-by: Marc Kleine-Budde <mkl at pengutronix.de>

What you're saying seems to contradict the tag you've given, is a
fallback really suitable if the standby polarity is not the same?
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-phy/attachments/20251210/f748dff0/attachment.sig>