[PATCH v2] dt-bindings: phy: ti,tcan104x-can: Document TI TCAN1046

[Marc Kleine-Budde]

On 09.12.2025 16:21:19, Prabhakar wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj at bp.renesas.com>
>
> Document the TI TCAN1046 automotive CAN transceiver. The TCAN1046 is a
> dual high-speed CAN transceiver with sleep-mode support and no EN pin,
> mirroring the behaviour of the NXP TJA1048, which also provides dual
> channels and STB1/2 sleep-control lines.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj at bp.renesas.com>
> ---
> TCAN 1046, https://www.ti.com/lit/ds/symlink/tcan1046v-q1.pdf?ts=1765297159307&ref_url=https%253A%252F%252Fwww.ti.com%252Fproduct%252FTCAN1046V-Q1
> NXP TJA1048, https://www.nxp.com/docs/en/data-sheet/TJA1048.pdf

The polarity of the standby line of the chips is different.

You must set the correct active high/low property for the GPIO, as the
driver uses logical levels.

Reviewed-by: Marc Kleine-Budde <mkl at pengutronix.de>

regards,
Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde          |
Embedded Linux                   | https://www.pengutronix.de |
Vertretung Nürnberg              | Phone: +49-5121-206917-129 |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-9   |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-phy/attachments/20251210/d0402952/attachment.sig>