[PATCH v3 8/9] phy: rockchip: phy-rockchip-samsung-hdptx: convert from round_rate() to determine_rate()

Brian Masney bmasney at redhat.com
Thu Dec 11 15:16:26 PST 2025


The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.

Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea at collabora.com>
Reviewed-by: Heiko Stuebner <heiko at sntech.de>
Signed-off-by: Brian Masney <bmasney at redhat.com>
---
 drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
index 29de2f7bdae8a31958e31b0a64281532fd76e64d..315ac97f52d8af6d3010dc87788575039c7a6b40 100644
--- a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
+++ b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
@@ -1870,8 +1870,8 @@ static unsigned long rk_hdptx_phy_clk_recalc_rate(struct clk_hw *hw,
 	return hdptx->hw_rate;
 }
 
-static long rk_hdptx_phy_clk_round_rate(struct clk_hw *hw, unsigned long rate,
-					unsigned long *parent_rate)
+static int rk_hdptx_phy_clk_determine_rate(struct clk_hw *hw,
+					   struct clk_rate_request *req)
 {
 	struct rk_hdptx_phy *hdptx = to_rk_hdptx_phy(hw);
 
@@ -1880,9 +1880,9 @@ static long rk_hdptx_phy_clk_round_rate(struct clk_hw *hw, unsigned long rate,
 	 * To be dropped as soon as the RK DW HDMI QP bridge driver
 	 * switches to make use of phy_configure().
 	 */
-	if (!hdptx->restrict_rate_change && rate != hdptx->hdmi_cfg.tmds_char_rate) {
+	if (!hdptx->restrict_rate_change && req->rate != hdptx->hdmi_cfg.tmds_char_rate) {
 		struct phy_configure_opts_hdmi hdmi = {
-			.tmds_char_rate = rate,
+			.tmds_char_rate = req->rate,
 		};
 		int ret = rk_hdptx_phy_verify_hdmi_config(hdptx, &hdmi);
 
@@ -1897,7 +1897,10 @@ static long rk_hdptx_phy_clk_round_rate(struct clk_hw *hw, unsigned long rate,
 	 * hence ensure rk_hdptx_phy_clk_set_rate() won't be invoked with
 	 * a different rate argument.
 	 */
-	return DIV_ROUND_CLOSEST_ULL(hdptx->hdmi_cfg.tmds_char_rate * 8, hdptx->hdmi_cfg.bpc);
+	req->rate = DIV_ROUND_CLOSEST_ULL(hdptx->hdmi_cfg.tmds_char_rate * 8,
+					  hdptx->hdmi_cfg.bpc);
+
+	return 0;
 }
 
 static int rk_hdptx_phy_clk_set_rate(struct clk_hw *hw, unsigned long rate,
@@ -1927,7 +1930,7 @@ static const struct clk_ops hdptx_phy_clk_ops = {
 	.prepare = rk_hdptx_phy_clk_prepare,
 	.unprepare = rk_hdptx_phy_clk_unprepare,
 	.recalc_rate = rk_hdptx_phy_clk_recalc_rate,
-	.round_rate = rk_hdptx_phy_clk_round_rate,
+	.determine_rate = rk_hdptx_phy_clk_determine_rate,
 	.set_rate = rk_hdptx_phy_clk_set_rate,
 };
 

-- 
2.52.0




More information about the linux-phy mailing list