[PATCH V1 4/4] arm64: dts: qcom: hamoa-iot-evk: Enable UFS

[Pradeep Pragallapati]

On 12/29/2025 5:47 PM, Konrad Dybcio wrote:
> On 12/29/25 7:06 AM, Pradeep P V K wrote:
>> Enable UFS for HAMOA-IOT-EVK board.
>>
>> Signed-off-by: Pradeep P V K <pradeep.pragallapati at oss.qualcomm.com>
>> ---
> [...]
>
>> +&ufs_mem_hc {
>> +	reset-gpios = <&tlmm 238 GPIO_ACTIVE_LOW>;
>> +
>> +	vcc-supply = <&vreg_l17b_2p5>;
>> +	vcc-max-microamp = <1300000>;
> I think they should both be 1.2 A peak
>
> Konrad
This (1.3 A) is as per Hamoa power grid, which is same as SM8550.
>> +	vccq-supply = <&vreg_l2i_1p2>;
>> +	vccq-max-microamp = <1200000>;
>> +
>> +	status = "okay";
>> +};
>> +
>>   &usb_1_ss0_dwc3_hs {
>>   	remote-endpoint = <&pmic_glink_ss0_hs_in>;
>>   };