[PATCH V1 4/4] arm64: dts: qcom: hamoa-iot-evk: Enable UFS

[Konrad Dybcio]

On 12/29/25 7:06 AM, Pradeep P V K wrote:
> Enable UFS for HAMOA-IOT-EVK board.
> 
> Signed-off-by: Pradeep P V K <pradeep.pragallapati at oss.qualcomm.com>
> ---

[...]

> +&ufs_mem_hc {
> +	reset-gpios = <&tlmm 238 GPIO_ACTIVE_LOW>;
> +
> +	vcc-supply = <&vreg_l17b_2p5>;
> +	vcc-max-microamp = <1300000>;

I think they should both be 1.2 A peak

Konrad

> +	vccq-supply = <&vreg_l2i_1p2>;
> +	vccq-max-microamp = <1200000>;
> +
> +	status = "okay";
> +};
> +
>  &usb_1_ss0_dwc3_hs {
>  	remote-endpoint = <&pmic_glink_ss0_hs_in>;
>  };