March 2022 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Tue Mar 1 00:18:42 PST 2022
Ending: Thu Mar 31 16:22:56 PDT 2022
Messages: 470

• [PATCH] dt-bindings: Another pass removing cases of 'allOf' containing a '$ref'   Laurent Pinchart
• [PATCH v2] mtd: rawnand: atmel: fix refcount issue in atmel_nand_controller_init   Boris Brezillon
• [PATCH v4 4/6] mtd: spi-nor: macronix: Handle ID collision b/w MX25L12805D and MX25L12835F   Tudor.Ambarus at microchip.com
• [PATCH] dt-bindings: Another pass removing cases of 'allOf' containing a '$ref'   Greg Kroah-Hartman
• [PATCH v4 4/6] mtd: spi-nor: macronix: Handle ID collision b/w MX25L12805D and MX25L12835F   Heiko Thiery
• [PATCH 0/2] mtd: spi-nor: Fix Quad Enable method for MX25L12835F   Tudor Ambarus
• [PATCH 1/2] mtd: spi-nor: macronix: Move set_4byte_addr_mode() to late_init()   Tudor Ambarus
• [PATCH 2/2] mtd: spi-nor: macronix: Use post_bfpt hook to fix quad_enable method for MX25L12835F   Tudor Ambarus
• [PATCH] dt-bindings: Another pass removing cases of 'allOf' containing a '$ref'   Lee Jones
• [PATCH] dt-bindings: Another pass removing cases of 'allOf' containing a '$ref'   Vinod Koul
• Different writeback timing since v5.14   Richard Weinberger
• [PATCH 0/2] mtd: spi-nor: Fix Quad Enable method for MX25L12835F   Heiko Thiery
• Different writeback timing since v5.14   Jan Kara
• [PATCH 0/2] mtd: spi-nor: Fix Quad Enable method for MX25L12835F   Michael Walle
• [PATCH 0/2] mtd: spi-nor: Fix Quad Enable method for MX25L12835F   Tudor.Ambarus at microchip.com
• [PATCH 0/2] mtd: spi-nor: Fix Quad Enable method for MX25L12835F   Tudor.Ambarus at microchip.com
• [PATCH 0/2] mtd: spi-nor: Fix Quad Enable method for MX25L12835F   Tudor.Ambarus at microchip.com
• [PATCH 1/2] mtd: spi-nor: macronix: Move set_4byte_addr_mode() to late_init()   Tudor.Ambarus at microchip.com
• [PATCH 0/2] mtd: spi-nor: Fix Quad Enable method for MX25L12835F   Michael Walle
• [PATCH 0/2] mtd: spi-nor: Fix Quad Enable method for MX25L12835F   Tudor.Ambarus at microchip.com
• [PATCH RFC] mtd: spi-nor: unset quad_enable if SFDP doesn't specify it   Michael Walle
• [PATCH 0/2] mtd: spi-nor: Fix Quad Enable method for MX25L12835F   Michael Walle
• [PATCH 0/2] mtd: spi-nor: Fix Quad Enable method for MX25L12835F   Heiko Thiery
• [PATCH 0/2] mtd: spi-nor: Fix Quad Enable method for MX25L12835F   Heiko Thiery
• [PATCH 2/2] mtd: spi-nor: macronix: Use post_bfpt hook to fix quad_enable method for MX25L12835F   Michael Walle
• Different writeback timing since v5.14   Richard Weinberger
• [PATCH RFC] mtd: spi-nor: unset quad_enable if SFDP doesn't specify it   Heiko Thiery
• [PATCH v4 1/6] mtd: spi-nor: core: Report correct name in case of ID collisions   Michael Walle
• [PATCH v4 2/6] mtd: spi-nor: core: Handle ID collisions between SFDP & non-SFDP flashes   Michael Walle
• [PATCH v4 3/6] mtd: spi-nor: macronix: Handle ID collision b/w MX25L3233F and MX25L3205D   Michael Walle
• [PATCH v4 5/6] mtd: spi-nor: Introduce Manufacturer ID collisions driver   Michael Walle
• [PATCH v4 6/6] mtd: spi-nor: manuf-id-collisions: Add support for xt25f128b   Michael Walle
• [PATCH] mtd: spi-nor: Skip erase logic when SPI_NOR_NO_ERASE is set   Michael Walle
• [PATCH] dt-bindings: Another pass removing cases of 'allOf' containing a '$ref'   Jakub Kicinski
• [PATCH] dt-bindings: Another pass removing cases of 'allOf' containing a '$ref'   Bjorn Andersson
• [PATCH RESEND v2 1/2] mtd: rawnand: meson: discard the common MMC sub clock framework   Liang.Yang
• [PATCH RESEND v2 2/2] dt-bindings: nand: meson: refine Amlogic NAND controller driver   Liang.Yang
• [PATCH 5/5] spi: make remove callback a void function   Pavel Machek
• [PATCH RESEND v2 2/2] dt-bindings: nand: meson: refine Amlogic NAND controller driver   Jerome Brunet
• Different writeback timing since v5.14   Jan Kara
• [PATCH RESEND v2 2/2] dt-bindings: nand: meson: refine Amlogic NAND controller driver   Liang.Yang
• [PATCH 1/4] spi: spi-mem: Allow specifying the byte order in DTR mode   Pratyush Yadav
• [PATCH 2/4] mtd: spi-nor: core: Allow specifying the byte order in DTR mode   Pratyush Yadav
• [PATCH 3/4] mtd: spi-nor: sfdp: Get the 8D-8D-8D byte order from BFPT   Pratyush Yadav
• [PATCH 4/4] mtd: spi-nor: core: Introduce SPI_NOR_DTR_BSWAP16 no_sfdp_flag   Pratyush Yadav
• [PATCH v3] mtd: rawnand: atmel: fix refcount issue in atmel_nand_controller_init   Xin Xiong
• [PATCH v3 05/17] mtd: spinand: Define ctrl_ops for non-page read/write op templates   Apurva Nandan
• [PATCH v2 00/10] spi: spi-mem: Add driver for Aspeed SMC controllers   Cédric Le Goater
• [PATCH v2 01/10] mtd: spi-nor: aspeed: Rename Kconfig option   Cédric Le Goater
• [PATCH v2 02/10] ARM: dts: aspeed: Adjust "reg" property of FMC/SPI controllers   Cédric Le Goater
• [PATCH v2 03/10] dt-bindings: spi: Add Aspeed SMC controllers device tree binding   Cédric Le Goater
• [PATCH v2 04/10] spi: spi-mem: Add driver for Aspeed SMC controllers   Cédric Le Goater
• [PATCH v2 05/10] spi: aspeed: Add support for direct mapping   Cédric Le Goater
• [PATCH v2 06/10] spi: aspeed: Adjust direct mapping to device size   Cédric Le Goater
• [PATCH v2 07/10] spi: aspeed: Workaround AST2500 limitations   Cédric Le Goater
• [PATCH v2 08/10] spi: aspeed: Add support for the AST2400 SPI controller   Cédric Le Goater
• [PATCH v2 09/10] spi: aspeed: Calibrate read timings   Cédric Le Goater
• [PATCH v2 10/10] ARM: dts: aspeed: Enable Dual SPI RX transfers   Cédric Le Goater
• [PATCH v3 05/17] mtd: spinand: Define ctrl_ops for non-page read/write op templates   Boris Brezillon
• [PATCH v2 03/10] dt-bindings: spi: Add Aspeed SMC controllers device tree binding   Rob Herring
• [PATCH] dt-bindings: mtd: partitions: add UBI binding   Rob Herring
• [PATCH v2 01/10] mtd: spi-nor: aspeed: Rename Kconfig option   Joel Stanley
• [PATCH v2 02/10] ARM: dts: aspeed: Adjust "reg" property of FMC/SPI controllers   Joel Stanley
• [PATCH v2 03/10] dt-bindings: spi: Add Aspeed SMC controllers device tree binding   Joel Stanley
• [PATCH v2 07/10] spi: aspeed: Workaround AST2500 limitations   Joel Stanley
• [PATCH v2 06/10] spi: aspeed: Adjust direct mapping to device size   Joel Stanley
• [PATCH v2 08/10] spi: aspeed: Add support for the AST2400 SPI controller   Joel Stanley
• [PATCH v2 09/10] spi: aspeed: Calibrate read timings   Joel Stanley
• [PATCH v2 10/10] ARM: dts: aspeed: Enable Dual SPI RX transfers   Joel Stanley
• [PATCH v2 05/10] spi: aspeed: Add support for direct mapping   Joel Stanley
• [PATCH v2 10/10] ARM: dts: aspeed: Enable Dual SPI RX transfers   Joel Stanley
• [PATCH v2 04/10] spi: spi-mem: Add driver for Aspeed SMC controllers   Joel Stanley
• [PATCH v2 10/10] ARM: dts: aspeed: Enable Dual SPI RX transfers   Cédric Le Goater
• [PATCH] dt-bindings: mtd: partitions: add UBI binding   Rafał Miłecki
• [PATCH v2 00/10] spi: spi-mem: Add driver for Aspeed SMC controllers   Joel Stanley
• [PATCH] mtd: rawnand: rockchip: fix platform_get_irq.cocci warning   Yihao Han
• [PATCH v4 2/6] mtd: spi-nor: core: Handle ID collisions between SFDP & non-SFDP flashes   Tudor.Ambarus at microchip.com
• [PATCH v4 2/6] mtd: spi-nor: core: Handle ID collisions between SFDP & non-SFDP flashes   Michael Walle
• [PATCH v4 2/6] mtd: spi-nor: core: Handle ID collisions between SFDP & non-SFDP flashes   Tudor.Ambarus at microchip.com
• [PATCH v4 3/6] mtd: spi-nor: macronix: Handle ID collision b/w MX25L3233F and MX25L3205D   Tudor.Ambarus at microchip.com
• [PATCH v4 3/6] mtd: spi-nor: macronix: Handle ID collision b/w MX25L3233F and MX25L3205D   Michael Walle
• [PATCH v4 2/6] mtd: spi-nor: core: Handle ID collisions between SFDP & non-SFDP flashes   Michael Walle
• [PATCH v4 2/6] mtd: spi-nor: core: Handle ID collisions between SFDP & non-SFDP flashes   Tudor.Ambarus at microchip.com
• [PATCH v4 5/6] mtd: spi-nor: Introduce Manufacturer ID collisions driver   Tudor.Ambarus at microchip.com
• [PATCH v4 2/6] mtd: spi-nor: core: Handle ID collisions between SFDP & non-SFDP flashes   Michael Walle
• [PATCH v4 3/6] mtd: spi-nor: macronix: Handle ID collision b/w MX25L3233F and MX25L3205D   Michael Walle
• [PATCH v4 6/6] mtd: spi-nor: manuf-id-collisions: Add support for xt25f128b   Chris Morgan
• [PATCH v4 5/6] mtd: spi-nor: Introduce Manufacturer ID collisions driver   Michael Walle
• [PATCH v4 6/6] mtd: spi-nor: manuf-id-collisions: Add support for xt25f128b   Tudor.Ambarus at microchip.com
• [PATCH v4 3/6] mtd: spi-nor: macronix: Handle ID collision b/w MX25L3233F and MX25L3205D   Tudor.Ambarus at microchip.com
• [PATCH v4 6/6] mtd: spi-nor: manuf-id-collisions: Add support for xt25f128b   Chris Morgan
• [PATCH] mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N   Thorsten Leemhuis
• [PATCH v4 5/6] mtd: spi-nor: Introduce Manufacturer ID collisions driver   Tudor.Ambarus at microchip.com
• [PATCH RFC] mtd: spi-nor: unset quad_enable if SFDP doesn't specify it   Tudor.Ambarus at microchip.com
• [PATCH v2] mtd: core: Remove partid and partname debugfs files   Tudor.Ambarus at microchip.com
• [PATCH v3] mtd: rawnand: atmel: fix refcount issue in atmel_nand_controller_init   Claudiu.Beznea at microchip.com
• [PATCH v2 00/10] spi: spi-mem: Add driver for Aspeed SMC controllers   Tao Ren
• [PATCH v3 00/11] spi: spi-mem: Add driver for Aspeed SMC controllers   Cédric Le Goater
• [PATCH v3 01/11] mtd: spi-nor: aspeed: Rename Kconfig option   Cédric Le Goater
• [PATCH v3 02/11] ARM: dts: aspeed: Adjust "reg" property of FMC/SPI controllers   Cédric Le Goater
• [PATCH v3 03/11] dt-bindings: spi: Add Aspeed SMC controllers device tree binding   Cédric Le Goater
• [PATCH v3 04/11] spi: spi-mem: Add driver for Aspeed SMC controllers   Cédric Le Goater
• [PATCH v3 05/11] spi: aspeed: Add support for direct mapping   Cédric Le Goater
• [PATCH v3 06/11] spi: aspeed: Adjust direct mapping to device size   Cédric Le Goater
• [PATCH v3 07/11] spi: aspeed: Workaround AST2500 limitations   Cédric Le Goater
• [PATCH v3 08/11] spi: aspeed: Add support for the AST2400 SPI controller   Cédric Le Goater
• [PATCH v3 09/11] spi: aspeed: Calibrate read timings   Cédric Le Goater
• [PATCH v3 10/11] ARM: dts: aspeed: Enable Dual SPI RX transfers   Cédric Le Goater
• [PATCH v3 11/11] ARM: dts: aspeed-g4: Set spi-max-frequency for all flashes   Cédric Le Goater
• [PATCH v4] mtd: rawnand: atmel: fix refcount issue in atmel_nand_controller_init   Xin Xiong
• [PATCH] mtd: spi-nor: Introduce templates for SPI NOR operations   Tudor Ambarus
• [PATCH] mtd: spi-nor: Introduce templates for SPI NOR operations   Tudor.Ambarus at microchip.com
• [BUG] mtd: cfi_cmdset_0002: write regression since v4.17-rc1   Ahmad Fatoum
• [PATCH v4 5/6] mtd: spi-nor: Introduce Manufacturer ID collisions driver   Michael Walle
• [PATCH v4 3/6] mtd: spi-nor: macronix: Handle ID collision b/w MX25L3233F and MX25L3205D   Michael Walle
• [PATCH] mtd: rawnand: omap2: Actually prevent invalid configuration and build error   Miquel Raynal
• [PATCH v1] mtd: spi-nor: unset quad_enable if SFDP doesn't specify it   Michael Walle
• [PATCH] mtd: rawnand: omap2: Actually prevent invalid configuration and build error   Guenter Roeck
• [PATCH v4 5/6] mtd: spi-nor: Introduce Manufacturer ID collisions driver   George Brooke
• [PATCH] mtd: rawnand: omap2: Actually prevent invalid configuration and build error   Roger Quadros
• GOD BLESS YOU AS YOU REPLY URGENTLY   Mrs Susan Elwood Hara
• [PATCH V7] mtd: spi-nor: winbond: add support for W25Q512NW-IM   Sajida Bhanu (Temp) (QUIC)
• [PATCH v2] mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N   Tokunori Ikegami
• [PATCH] mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N   Tokunori Ikegami
• [BUG] mtd: cfi_cmdset_0002: write regression since v4.17-rc1   Tokunori Ikegami
• [GIT PULL] mtd: Fixes for v5.17-rc5   Linus Torvalds
• [PATCH v4 5/6] mtd: spi-nor: Introduce Manufacturer ID collisions driver   Tudor.Ambarus at microchip.com
• [PATCH v1] mtd: spi-nor: unset quad_enable if SFDP doesn't specify it   Tudor.Ambarus at microchip.com
• [PATCH v1] mtd: spi-nor: unset quad_enable if SFDP doesn't specify it   Tudor.Ambarus at microchip.com
• [PATCH] mtd: rawnand: omap2: Actually prevent invalid configuration and build error   Miquel Raynal
• [PATCH] mtd: rawnand: omap2: Actually prevent invalid configuration and build error   Roger Quadros
• [PATCH] mtd: hyperbus: HBMC_AM654 should depend on ARCH_K3   Geert Uytterhoeven
• [PATCH] mtd: rawnand: omap2: Actually prevent invalid configuration and build error   Miquel Raynal
• [PATCH 0/4] mtd: phram improvements   Vincent Whitchurch
• [PATCH 1/4] mtd: core: Check devicetree alias for index   Vincent Whitchurch
• [PATCH 2/4] dt-bindings: reserved-memory: Add phram   Vincent Whitchurch
• [PATCH 3/4] mtd: phram: Allow probing via reserved-memory   Vincent Whitchurch
• [PATCH 4/4] mtd: phram: Allow cached mappings   Vincent Whitchurch
• [PATCH] mtd: rawnand: omap2: Actually prevent invalid configuration and build error   Miquel Raynal
• [PATCH] mtd: rawnand: gpmi: add support for legacy-bch-geometry   Alifer Moraes
• [GIT PULL] mtd: Fixes for v5.17-rc5   Miquel Raynal
• [GIT PULL] mtd: Fixes for the next -rc/v5.17 final   Miquel Raynal
• [PATCH v1] mtd: spi-nor: unset quad_enable if SFDP doesn't specify it   Michael Walle
• [GIT PULL] mtd: Fixes for the next -rc/v5.17 final   pr-tracker-bot at kernel.org
• [PATCH] mtd: rawnand: omap2: Actually prevent invalid configuration and build error   Roger Quadros
• [PATCH][next] mtd: nand: mxic-ecc: make two read-only arrays static const   Colin Ian King
• ubifs: handling dirty data (writing back) + power cuts   Sergey Ryazanov
• Napływ Klientów ze strony   Mikołaj Rudzik
• [PATCH v2] mtd: spi-nor: core: Skip setting erase types when SPI_NOR_NO_ERASE is set   Tudor Ambarus
• [PATCH] mtd: rawnand: omap2: Actually prevent invalid configuration and build error   Miquel Raynal
• [BUG] mtd: cfi_cmdset_0002: write regression since v4.17-rc1   Ahmad Fatoum
• [PATCH] mtd: spi-nor: Skip erase logic when SPI_NOR_NO_ERASE is set   Tudor Ambarus
• [GIT PULL] mtd: spi-nor: Changes for 5.18   Tudor.Ambarus at microchip.com
• [BUG] mtd: cfi_cmdset_0002: write regression since v4.17-rc1   Tokunori Ikegami
• [BUG] mtd: cfi_cmdset_0002: write regression since v4.17-rc1   Ahmad Fatoum
• [BUG] mtd: cfi_cmdset_0002: write regression since v4.17-rc1   Tokunori Ikegami
• [PATCH v1] mtd: spi-nor: unset quad_enable if SFDP doesn't specify it   Tudor.Ambarus at microchip.com
• [PATCH v2] mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N   Vignesh Raghavendra
• [PATCH v2] mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N   Ahmad Fatoum
• [PATCH 0/5] mtd: spi-nor: Parse BFPT to determine the 4-Byte Address Mode   Tudor Ambarus
• [PATCH 1/5] mtd: spi-nor: Parse BFPT to determine the 4-Byte Address Mode methods   Tudor Ambarus
• [PATCH 2/5] mtd: spi-nor: Update name and description of the set_4byte_addr_mode BFPT methods   Tudor Ambarus
• [PATCH 3/5] mtd: spi-nor: Favor the BFPT-parsed set_4byte_addr_mode method   Tudor Ambarus
• [PATCH 4/5] mtd: spi-nor Favor the BFPT-parsed Quad Enable method   Tudor Ambarus
• [PATCH 5/5] mtd: spi-nor: sfdp: Keep SFDP definitions private   Tudor Ambarus
• [PATCH 4/5] mtd: spi-nor Favor the BFPT-parsed Quad Enable method   Tudor.Ambarus at microchip.com
• [PATCH v2 0/4] mtd: spi-nor: Parse BFPT to determine the 4-Byte Address Mode   Tudor Ambarus
• [PATCH v2 1/4] mtd: spi-nor: Parse BFPT to determine the 4-Byte Address Mode methods   Tudor Ambarus
• [PATCH v2 2/4] mtd: spi-nor: Update name and description of the set_4byte_addr_mode BFPT methods   Tudor Ambarus
• [PATCH v2 3/4] mtd: spi-nor: Favor the BFPT-parsed set_4byte_addr_mode method   Tudor Ambarus
• [PATCH v2 4/4] mtd: spi-nor: sfdp: Keep SFDP definitions private   Tudor Ambarus
• [PATCH v4] mtd: rawnand: atmel: fix refcount issue in atmel_nand_controller_init   Claudiu.Beznea at microchip.com
• [PATCH 4/4] mtd: spi-nor: core: Introduce SPI_NOR_DTR_BSWAP16 no_sfdp_flag   Tudor.Ambarus at microchip.com
• [PATCH 1/4] spi: spi-mem: Allow specifying the byte order in DTR mode   Tudor.Ambarus at microchip.com
• [PATCH v3 05/17] mtd: spinand: Define ctrl_ops for non-page read/write op templates   Apurva Nandan
• [PATCH -next] ubifs: rename_whiteout: correct old_dir size computing   libaokun (A)
• [PATCH -next v3 0/2] jffs2: fix two memory leak when mount jffs2   libaokun (A)
• [PATCH -next] jffs2: fix use-after-free in jffs2_clear_xattr_subsystem   libaokun (A)
• [PATCH v3 05/17] mtd: spinand: Define ctrl_ops for non-page read/write op templates   Boris Brezillon
• [PATCH 2/4] mtd: spi-nor: core: Allow specifying the byte order in DTR mode   Tudor.Ambarus at microchip.com
• [PATCH 2/4] dt-bindings: reserved-memory: Add phram   Rob Herring
• [PATCH v2 0/6] spi-mem: Allow specifying the byte order in DTR mode   Tudor Ambarus
• [PATCH v2 1/6] spi: spi-mem: Allow specifying the byte order in DTR mode   Tudor Ambarus
• [PATCH v2 2/6] mtd: spi-nor: core: Allow specifying the byte order in DTR mode   Tudor Ambarus
• [PATCH v2 3/6] mtd: spi-nor: sfdp: Get the 8D-8D-8D byte order from BFPT   Tudor Ambarus
• [PATCH v2 4/6] mtd: spi-nor: core: Introduce SPI_NOR_DTR_BSWAP16 no_sfdp_flag   Tudor Ambarus
• [PATCH v2 5/6] mtd: spi-nor: core: Introduce SPI_NOR_SOFT_RESET flash_info fixup_flag   Tudor Ambarus
• [PATCH v2 6/6] mtd: spi-nor: macronix: Add support for mx66lm1g45g   Tudor Ambarus
• [PATCH RESEND v2 1/2] mtd: rawnand: meson: discard the common MMC sub clock framework   Liang Yang
• [PATCH 2/4] dt-bindings: reserved-memory: Add phram   Vincent Whitchurch
• Handling ubinized image flashed on not erased flash space   Rafał Miłecki
• [PATCH RFC] memory: renesas-rpc-if: Fix HF/OSPI data transfer in Manual mode   Geert Uytterhoeven
• [PATCH 1/4] spi: spi-mem: Allow specifying the byte order in DTR mode   Pratyush Yadav
• [PATCH] mtd: nand: raw: qcom_nandc: Don't clear_bam_transaction on READID   Konrad Dybcio
• [PATCH v3 05/17] mtd: spinand: Define ctrl_ops for non-page read/write op templates   Apurva Nandan
• [PATCH 00/30] fix typos in comments   Julia Lawall
• [PATCH 13/30] UBI: block: fix typos in comments   Julia Lawall
• [PATCH] mtd: nand: ecc: mxic: Fix compile test issue   Miquel Raynal
• Make NAND_BBT_NO_OOB_BBM configurable or let the gpmi driver decide?   Miquel Raynal
• [PATCH][next] mtd: nand: mxic-ecc: make two read-only arrays static const   Miquel Raynal
• [PATCH] mtd: hyperbus: HBMC_AM654 should depend on ARCH_K3   Miquel Raynal
• [PATCH v2] mtd: core: Remove partid and partname debugfs files   Miquel Raynal
• [PATCH] dt-bindings: mtd: partitions: convert BCM47xx to the json-schema   Miquel Raynal
• [PATCH] mtd: tests: Fix eraseblock read speed miscalculation for lower partition sizes   Miquel Raynal
• [PATCH v4] mtd: rawnand: atmel: fix refcount issue in atmel_nand_controller_init   Miquel Raynal
• [PATCH] mtd: rawnand: rockchip: fix platform_get_irq.cocci warning   Miquel Raynal
• [PATCH 00/30] fix typos in comments   patchwork-bot+netdevbpf at kernel.org
• [PATCH v1] mtd: spi-nor: unset quad_enable if SFDP doesn't specify it   Michael Walle
• [PATCH 00/30] fix typos in comments   Martin K. Petersen
• [PATCH v1] mtd: spi-nor: unset quad_enable if SFDP doesn't specify it   Tudor.Ambarus at microchip.com
• [PATCH v2 0/6] spi-mem: Allow specifying the byte order in DTR mode   Vignesh Raghavendra
• [PATCH v2] mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N   Vignesh Raghavendra
• [PATCH v2 0/6] spi-mem: Allow specifying the byte order in DTR mode   Tudor.Ambarus at microchip.com
• Make NAND_BBT_NO_OOB_BBM configurable or let the gpmi driver decide?   Lothar Waßmann
• [PATCH v2 0/6] spi-mem: Allow specifying the byte order in DTR mode   Michael Walle
• [PATCH v1] mtd: spi-nor: unset quad_enable if SFDP doesn't specify it   Michael Walle
• [PATCH v1] mtd: spi-nor: unset quad_enable if SFDP doesn't specify it   Tudor.Ambarus at microchip.com
• Make NAND_BBT_NO_OOB_BBM configurable or let the gpmi driver decide?   Miquel Raynal
• [PATCH v2] mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N   Miquel Raynal
• [PATCH] mtd: nand: ecc: mxic: Fix compile test issue   Miquel Raynal
• (subset) [PATCH 00/30] fix typos in comments   Mark Brown
• [PATCH v3 0/3] mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N   Tokunori Ikegami
• [PATCH v3 1/3] mtd: cfi_cmdset_0002: Add S29GL064N ID definition   Tokunori Ikegami
• [PATCH v3 2/3] mtd: cfi_cmdset_0002: Move and rename chip_check/chip_ready/chip_good_for_write   Tokunori Ikegami
• [PATCH v3 3/3] mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N   Tokunori Ikegami
• [PATCH v2] mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N   Tokunori Ikegami
• [PATCH v3 1/3] mtd: cfi_cmdset_0002: Add S29GL064N ID definition   Miquel Raynal
• [PATCH v3 2/3] mtd: cfi_cmdset_0002: Move and rename chip_check/chip_ready/chip_good_for_write   Miquel Raynal
• [PATCH v3 3/3] mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N   Miquel Raynal
• [PATCH v2 0/6] spi-mem: Allow specifying the byte order in DTR mode   Vignesh Raghavendra
• [PATCH v2 0/6] spi-mem: Allow specifying the byte order in DTR mode   Vignesh Raghavendra
• [PATCH 1/2] mtd: spi-nor: Fix shift-out-of-bounds   Alexander Stein
• [PATCH 1/2] mtd: spi-nor: Fix shift-out-of-bounds   Tudor.Ambarus at microchip.com
• [PATCH v2 0/6] spi-mem: Allow specifying the byte order in DTR mode   Tudor.Ambarus at microchip.com
• [PATCH v2 0/6] spi-mem: Allow specifying the byte order in DTR mode   Michael Walle
• [PATCH] Allow rfddump and rfdformat to work on a test mtdram   Sean Young
• [PATCH] Allow rfddump and rfdformat to work on a test mtdram   Richard Weinberger
• [PATCH v2 0/6] spi-mem: Allow specifying the byte order in DTR mode   David Laight
• [PATCH v4 0/3] mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N   Tokunori Ikegami
• [PATCH v4 1/3] mtd: cfi_cmdset_0002: Move and rename chip_check/chip_ready/chip_good_for_write   Tokunori Ikegami
• [PATCH v4 2/3] mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N   Tokunori Ikegami
• [PATCH v4 3/3] mtd: cfi_cmdset_0002: Add S29GL064N ID definition   Tokunori Ikegami
• [PATCH v3 1/3] mtd: cfi_cmdset_0002: Add S29GL064N ID definition   Tokunori Ikegami
• [PATCH v3 2/3] mtd: cfi_cmdset_0002: Move and rename chip_check/chip_ready/chip_good_for_write   Tokunori Ikegami
• [PATCH v3 3/3] mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N   Tokunori Ikegami
• [PATCH v4 1/3] mtd: cfi_cmdset_0002: Move and rename chip_check/chip_ready/chip_good_for_write   Miquel Raynal
• [PATCH v4 2/3] mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N   Miquel Raynal
• [PATCH v4 0/3] mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N   Miquel Raynal
• [PATCH v1] mtd: spi-nor: unset quad_enable if SFDP doesn't specify it   Pratyush Yadav
• [PATCH -next] ubifs: rename_whiteout: correct old_dir size computing   Richard Weinberger
• [PATCH -next v3 0/2] jffs2: fix two memory leak when mount jffs2   Richard Weinberger
• [PATCH -next] jffs2: fix use-after-free in jffs2_clear_xattr_subsystem   Richard Weinberger
• [PATCH -next] jffs2: fix use-after-free in jffs2_clear_xattr_subsystem   libaokun (A)
• [PATCH -next v3 0/2] jffs2: fix two memory leak when mount jffs2   libaokun (A)
• [PATCH -next] ubifs: rename_whiteout: correct old_dir size computing   libaokun (A)
• [PATCH RFC] memory: renesas-rpc-if: Fix HF/OSPI data transfer in Manual mode   Krzysztof Kozlowski
• Napływ Klientów ze strony   Mikołaj Rudzik
• [PATCH RFC] memory: renesas-rpc-if: Fix HF/OSPI data transfer in Manual mode   Wolfram Sang
• [PATCH v2 0/6] spi-mem: Allow specifying the byte order in DTR mode   Michael Walle
• [PATCH v4 2/3] mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N   Vignesh Raghavendra
• [PATCH v2 0/6] spi-mem: Allow specifying the byte order in DTR mode   David Laight
• [PATCH v2 0/6] spi-mem: Allow specifying the byte order in DTR mode   Vignesh Raghavendra
• [PATCH v2] memory: renesas-rpc-if: Fix HF/OSPI data transfer in Manual mode   Geert Uytterhoeven
• [PATCH v2 0/6] spi-mem: Allow specifying the byte order in DTR mode   David Laight
• [PATCH -next] mtd: rawnand: davinci: Remove redundant unsigned comparison to zero   Wang Weiyang
• [PATCH] mtd: parsers: bcm47xxpart: print correct offset on read error   Rafał Miłecki
• [EXT] [PATCH] mtd: mxs_nand: default to legacy bch and rename to modern bch option   Frieder Schrempf
• [EXT] [PATCH] mtd: mxs_nand: default to legacy bch and rename to modern bch option   Frieder Schrempf
• [PATCH v4 2/3] mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N   Ahmad Fatoum
• [PATCH v2 0/6] spi-mem: Allow specifying the byte order in DTR mode   Vignesh Raghavendra
• [PATCH -next] ubifs: rename_whiteout: correct old_dir size computing   Richard Weinberger
• [PATCH -next] ubifs: rename_whiteout: correct old_dir size computing   libaokun (A)
• [PATCH v2] memory: renesas-rpc-if: Fix HF/OSPI data transfer in Manual mode   Wolfram Sang
• [PATCH v3 0/2] refine the NFC clock framework   Liang Yang
• [PATCH v3 1/2] mtd: rawnand: meson: discard the common MMC sub clock framework   Liang Yang
• [PATCH v3 2/2] dt-bindings: nand: meson: refine Amlogic NAND controller driver   Liang Yang
• [PATCH v3 2/2] dt-bindings: nand: meson: refine Amlogic NAND controller driver   Neil Armstrong
• [PATCH v3 1/2] mtd: rawnand: meson: discard the common MMC sub clock framework   Neil Armstrong
• Handling ubinized image flashed on not erased flash space   Rafał Miłecki
• [PATCH] UBI: support EOF block marking end of ubinized image   Rafał Miłecki
• [PATCH] UBI: support EOF block marking end of ubinized image   Rafał Miłecki
• ECC errors after UBI writes with brcmnand (Northstar with v6.1 controller)   Rafał Miłecki
• [GIT PULL] mtd: nand: Changes for 5.18   Miquel Raynal
• [GIT PULL] mtd: spi-nor: Changes for 5.18   Miquel Raynal
• [PATCH] UBI: support EOF block marking end of ubinized image   Zhihao Cheng
• [linux-next:master] BUILD REGRESSION 6d72dda014a4753974eb08950089ddf71fec4f60   kernel test robot
• [PATCH 00/30] fix typos in comments   Martin K. Petersen
• [PATCH v3 2/2] dt-bindings: nand: meson: refine Amlogic NAND controller driver   Liang.Yang
• [PATCH v3 1/2] mtd: rawnand: meson: discard the common MMC sub clock framework   Liang.Yang
• [PATCH] mtd: spinand: gigadevice: fix Quad IO for GD5F1GQ5UExxG   Chuanhong Guo
• [PATCH] mtd: spinand: gigadevice: fix Quad IO for GD5F1GQ5UExxG   Chuanhong Guo
• [PATCH 0/5] mtd: spinand: add support for more GD SPI NANDs   Chuanhong Guo
• [PATCH 1/5] mtd: spinand: gigadevice: fix Quad IO for GD5F1GQ5UExxG   Chuanhong Guo
• [PATCH 2/5] mtd: spinand: gigadevice: add support for GD5FxGQ4xExxG   Chuanhong Guo
• [PATCH 3/5] mtd: spinand: gigadevice: add support for GD5F1GQ5RExxG   Chuanhong Guo
• [PATCH 4/5] mtd: spinand: gigadevice: add support for GD5F{2, 4}GQ5xExxG   Chuanhong Guo
• [PATCH 5/5] mtd: spinand: gigadevice: add support for GD5FxGM7xExxG   Chuanhong Guo
• [PATCH v3 1/2] mtd: rawnand: meson: discard the common MMC sub clock framework   kernel test robot
• [PATCH v2] memory: renesas-rpc-if: Fix HF/OSPI data transfer in Manual mode   Lad, Prabhakar
• [PATCH v4 2/3] mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N   Thorsten Leemhuis
• [PATCH v6 1/7] mtd: spi-nor: Rename method, s/spi_nor_match_id/spi_nor_match_name   Pratyush Yadav
• [PATCH v6 1/7] mtd: spi-nor: Rename method, s/spi_nor_match_id/spi_nor_match_name   Pratyush Yadav
• [PATCH v2 1/8] mtd: spi-nor: Rename method, s/spi_nor_match_id/spi_nor_match_name   Pratyush Yadav
• [PATCH v2 2/8] mtd: spi-nor: Introduce spi_nor_match_id()   Pratyush Yadav
• [PATCH v2 3/8] mtd: spi-nor: core: Use auto-detection only once   Pratyush Yadav
• [PATCH v2 4/8] mtd: spi-nor: core: Introduce method for RDID op   Pratyush Yadav
• [PATCH v2 5/8] mtd: spi-nor: manufacturers: Use spi_nor_read_id() core method   Pratyush Yadav
• [PATCH v2 7/8] mtd: spi-nor: micron-st: Rework spi_nor_micron_octal_dtr_enable()   Pratyush Yadav
• [PATCH v2 8/8] mtd: spi-nor: spansion: Rework spi_nor_cypress_octal_dtr_enable()   Pratyush Yadav
• [PATCH v4 2/3] mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N   Miquel Raynal
• [PATCH v2 3/8] mtd: spi-nor: core: Use auto-detection only once   Tudor.Ambarus at microchip.com
• [PATCH v4 2/3] mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N   Thorsten Leemhuis
• [PATCH v2 4/8] mtd: spi-nor: core: Introduce method for RDID op   Tudor.Ambarus at microchip.com
• [PATCH v2 8/8] mtd: spi-nor: spansion: Rework spi_nor_cypress_octal_dtr_enable()   Tudor.Ambarus at microchip.com
• [PATCH v4 2/3] mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N   Miquel Raynal
• [PATCH v4 2/3] mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N   Thorsten Leemhuis
• [PATCH v4 2/3] mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N   Miquel Raynal
• [PATCH v4 2/3] mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N   Thorsten Leemhuis
• [PATCH v2 4/8] mtd: spi-nor: core: Introduce method for RDID op   Pratyush Yadav
• [PATCH v2 3/8] mtd: spi-nor: core: Use auto-detection only once   Pratyush Yadav
• [EXT] [PATCH] mtd: mxs_nand: default to legacy bch and rename to modern bch option   Tim Harvey
• [PATCH] mtd: gpmi: fix the gpmi bch setting unalignment issue   Han Xu
• [PATCH] mtd: nand: raw: gpmi: fix bch geometry settings issue   Han Xu
• [PATCH v2 1/8] mtd: spi-nor: Rename method, s/spi_nor_match_id/spi_nor_match_name   Michael Walle
• [PATCH v2 2/8] mtd: spi-nor: Introduce spi_nor_match_id()   Michael Walle
• [PATCH v2 3/8] mtd: spi-nor: core: Use auto-detection only once   Michael Walle
• [PATCH v2 4/8] mtd: spi-nor: core: Introduce method for RDID op   Michael Walle
• [PATCH v2 6/8] mtd: spi-nor: core: Add helpers to read/write any register   Michael Walle
• [PATCH v5 0/3] mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N   Tokunori Ikegami
• [PATCH v5 1/3] mtd: cfi_cmdset_0002: Move and rename chip_check/chip_ready/chip_good_for_write   Tokunori Ikegami
• [PATCH v5 2/3] mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N   Tokunori Ikegami
• [PATCH v5 3/3] mtd: cfi_cmdset_0002: Add S29GL064N ID definition   Tokunori Ikegami
• [PATCH v4 1/3] mtd: cfi_cmdset_0002: Move and rename chip_check/chip_ready/chip_good_for_write   Tokunori Ikegami
• [PATCH v4 2/3] mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N   Tokunori Ikegami
• [PATCH v4 2/3] mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N   Tokunori Ikegami
• [PATCH v4 2/3] mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N   Tokunori Ikegami
• [PATCH v4 2/3] mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N   Tokunori Ikegami
• [PATCH v2 4/8] mtd: spi-nor: core: Introduce method for RDID op   Pratyush Yadav
• [PATCH v2 4/8] mtd: spi-nor: core: Introduce method for RDID op   Michael Walle
• [PATCH] mtd: gpmi: fix the gpmi bch setting unalignment issue   Sean Nyekjaer
• [PATCH] fs: ubifs: use NULL instead of using plain integer as pointer   Haowen Bai
• [EXT] [PATCH] mtd: mxs_nand: default to legacy bch and rename to modern bch option   Stefano Babic
• [EXT] [PATCH] mtd: mxs_nand: default to legacy bch and rename to modern bch option   Tim Harvey
• [EXT] [PATCH] mtd: mxs_nand: default to legacy bch and rename to modern bch option   Tim Harvey
• ECC errors after UBI writes with brcmnand (Northstar with v6.1 controller)   Rafał Miłecki
• [PATCH v5 3/3] mtd: cfi_cmdset_0002: Add S29GL064N ID definition   Miquel Raynal
• [PATCH] mtd: gpmi: fix the gpmi bch setting unalignment issue   Tim Harvey
• [PATCH v5 3/3] mtd: cfi_cmdset_0002: Add S29GL064N ID definition   Tokunori Ikegami
• [PATCH v6 3/3] mtd: cfi_cmdset_0002: Rename chip_ready variables and add ID definition   Tokunori Ikegami
• [PATCH] UBI: support EOF block marking end of ubinized image   Rafał Miłecki
• [PATCH v6 3/3] mtd: cfi_cmdset_0002: Rename chip_ready variables and add ID definition   Miquel Raynal
• [PATCH 0/3] mtd: rawnand: omap_elm: convert DT binding to yaml   Roger Quadros
• [PATCH 1/3] dt-bindings: mtd: ti,elm: Convert to yaml   Roger Quadros
• [PATCH 2/3] dt-bindings: mtd: ti,elm: Add support for AM64 ELM   Roger Quadros
• [PATCH 3/3] mtd: rawnand: omap_elm: Add compatible for AM64 ELM   Roger Quadros
• ECC errors after UBI writes with brcmnand (Northstar with v6.1 controller)   Rafał Miłecki
• ECC errors after UBI writes with brcmnand (Northstar with v6.1 controller)   Miquel Raynal
• [PATCH v6 3/3] mtd: cfi_cmdset_0002: Rename chip_ready variables and add ID definition   Tokunori Ikegami
• [PATCH v6 3/3] mtd: cfi_cmdset_0002: Rename chip_ready variables and add ID definition   Miquel Raynal
• [PATCH v7 0/4] mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N   Tokunori Ikegami
• [PATCH v7 1/4] mtd: cfi_cmdset_0002: Move and rename chip_check/chip_ready/chip_good_for_write   Tokunori Ikegami
• [PATCH v7 2/4] mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N   Tokunori Ikegami
• [PATCH v7 3/4] mtd: cfi_cmdset_0002: Add S29GL064N ID definition   Tokunori Ikegami
• [PATCH v7 4/4] mtd: cfi_cmdset_0002: Rename chip_ready variables   Tokunori Ikegami
• [PATCH v6 3/3] mtd: cfi_cmdset_0002: Rename chip_ready variables and add ID definition   Tokunori Ikegami
• [GIT PULL] mtd: nand: Changes for 5.18   Miquel Raynal
• [PATCH] mtd: gpmi: fix the gpmi bch setting unalignment issue   Han Xu
• [PATCH] mtd: spi-nor: core: Fix 16bit write sr_and_check status check   Nathan Rossi
• S25HS512T SPI flash support in kernel-4.9.65   Mithran B
• [GIT PULL] mtd: Changes for 5.18   Miquel Raynal
• [PATCH] mtd: nand: raw: gpmi: fix bch geometry settings issue   Sean Nyekjaer
• [PATCH] mtd: nand: raw: gpmi: fix bch geometry settings issue   Miquel Raynal
• ECC errors after UBI writes with brcmnand (Northstar with v6.1 controller)   Rafał Miłecki
• [PATCH 1/3] dt-bindings: mtd: ti,elm: Convert to yaml   Krzysztof Kozlowski
• [PATCH 2/3] dt-bindings: mtd: ti,elm: Add support for AM64 ELM   Krzysztof Kozlowski
• [PATCH V8] mtd: spi-nor: winbond: add support for W25Q512NW-IM   Shaik Sajida Bhanu
• [PATCH v4 00/11] spi: spi-mem: Convert Aspeed SMC driver to spi-mem   Cédric Le Goater
• [PATCH v4 01/11] ARM: dts: aspeed: Adjust "reg" property of FMC/SPI controllers   Cédric Le Goater
• [PATCH v4 02/11] dt-bindings: spi: Add Aspeed SMC controllers device tree binding   Cédric Le Goater
• [PATCH v4 03/11] spi: spi-mem: Convert Aspeed SMC driver to spi-mem   Cédric Le Goater
• [PATCH v4 04/11] spi: aspeed: Add support for direct mapping   Cédric Le Goater
• [PATCH v4 05/11] spi: aspeed: Adjust direct mapping to device size   Cédric Le Goater
• [PATCH v4 06/11] spi: aspeed: Workaround AST2500 limitations   Cédric Le Goater
• [PATCH v4 07/11] spi: aspeed: Add support for the AST2400 SPI controller   Cédric Le Goater
• [PATCH v4 08/11] spi: aspeed: Calibrate read timings   Cédric Le Goater
• [PATCH v4 09/11] ARM: dts: aspeed: Enable Dual SPI RX transfers   Cédric Le Goater
• [PATCH v4 10/11] ARM: dts: aspeed-g4: Set spi-max-frequency for all flashes   Cédric Le Goater
• [PATCH v4 11/11] mtd: spi-nor: aspeed: set the decoding size to at least 2MB for AST2600   Cédric Le Goater
• [PATCH mtd-utils] nandwrite: warn about writing 0xff blocks   Rafał Miłecki
• [PATCH 1/3] dt-bindings: mtd: ti,elm: Convert to yaml   Roger Quadros
• [PATCH 2/3] dt-bindings: mtd: ti,elm: Add support for AM64 ELM   Roger Quadros
• [PATCH 2/3] dt-bindings: mtd: ti,elm: Add support for AM64 ELM   Krzysztof Kozlowski
• [PATCH 2/3] dt-bindings: mtd: ti,elm: Add support for AM64 ELM   Roger Quadros
• [PATCH 2/3] dt-bindings: mtd: ti,elm: Add support for AM64 ELM   Krzysztof Kozlowski
• [PATCH v2 0/3] mtd: rawnand: omap_elm: convert DT binding to yaml   Roger Quadros
• [PATCH v2 1/3] dt-bindings: mtd: ti,elm: Convert to yaml   Roger Quadros
• [PATCH v2 2/3] dt-bindings: mtd: ti,elm: Add support for AM64 ELM   Roger Quadros
• [PATCH v2 3/3] mtd: rawnand: omap_elm: Add compatible for AM64 ELM   Roger Quadros
• [PATCH v2 1/3] dt-bindings: mtd: ti,elm: Convert to yaml   Rob Herring
• [PATCH v2 2/3] dt-bindings: mtd: ti, elm: Add support for AM64 ELM   Krzysztof Kozlowski
• [PATCH v2 1/3] dt-bindings: mtd: ti,elm: Convert to yaml   Krzysztof Kozlowski
• [PATCH v2 1/3] dt-bindings: mtd: ti,elm: Convert to yaml   Rob Herring
• [GIT PULL] mtd: Changes for 5.18   pr-tracker-bot at kernel.org
• [PATCH v2 1/2] mtd: rawnand: gpmi: Refactor bch geometry settings function   Han Xu
• [PATCH v2 2/2] mtd: rawnand: gpmi: Add large oob bch setting support   Han Xu
• [PATCH v3 0/3] mtd: rawnand: omap_elm: convert DT binding to yaml   Roger Quadros
• [PATCH v3 1/3] dt-bindings: mtd: ti,elm: Convert to yaml   Roger Quadros
• [PATCH v3 2/3] dt-bindings: mtd: ti,elm: Add support for AM64 ELM   Roger Quadros
• [PATCH v3 3/3] mtd: rawnand: omap_elm: Add compatible for AM64 ELM   Roger Quadros
• [PATCH v3 2/3] dt-bindings: mtd: ti, elm: Add support for AM64 ELM   Krzysztof Kozlowski
• [PATCH] mtd: spi-nor: fix minmax.cocci warnings   Julia Lawall
• [PATCH] mtd: rawnand: print offset instead of page number for bad blocks   Rafał Miłecki
• ILLUMINATEN   ILLUMINATI
• [PATCH] mtd: spi-nor: fix minmax.cocci warnings   Vignesh Raghavendra
• [PATCH mtd-utils] nandwrite: warn about writing 0xff blocks   David Oberhollenzer
• [PATCH mtd-utils] nandwrite: warn about writing 0xff blocks   Richard Weinberger
• [PATCH mtd-utils] nandwrite: warn about writing 0xff blocks   Richard Weinberger
• Koszty instalacji fotowoltaicznej   Arkadiusz Sokołowski
• [PATCH mtd-utils] nandwrite: warn about writing 0xff blocks   Rafał Miłecki
• [PATCH mtd-utils] nandwrite: warn about writing 0xff blocks   Miquel Raynal
• [PATCH mtd-utils] nandwrite: warn about writing 0xff blocks   Richard Weinberger
• [PATCH v2 2/2] mtd: rawnand: gpmi: Add large oob bch setting support   Miquel Raynal
• [PATCH v2 1/2] mtd: rawnand: gpmi: Refactor bch geometry settings function   Miquel Raynal
• [PATCH v4 2/3] mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N   Ahmad Fatoum
• [PATCH v7 0/4] mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N   Ahmad Fatoum
• [PATCH v4 2/3] mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N   Tokunori Ikegami
• [PATCH v7 0/4] mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N   Tokunori Ikegami
• [PATCH] mtdblock: warn if opened on NAND   Bjørn Mork
• Greetings from Netherlands   RGI COMPANY LTD
• [PATCH v4 03/11] spi: spi-mem: Convert Aspeed SMC driver to spi-mem   Cédric Le Goater
• [PATCH v3] memory: renesas-rpc-if: Fix HF/OSPI data transfer in Manual mode   Geert Uytterhoeven
• [PATCH v3] memory: renesas-rpc-if: Fix HF/OSPI data transfer in Manual mode   Wolfram Sang
• [PATCH v4 03/11] spi: spi-mem: Convert Aspeed SMC driver to spi-mem   Mark Brown
• [PATCH] mtd: spi-nor: fix minmax.cocci warnings   Pratyush Yadav
• [PATCH] mtd: parsers: add support for Sercomm partitions   Mikhail Zhilkin
• [PATCH 1/2] mtd: hyperbus: rpc-if: Fix RPM imbalance in probe error path   Geert Uytterhoeven
• [PATCH 2/2] spi: rpc-if: Fix RPM imbalance in probe error path   Geert Uytterhoeven
• Greetings from Netherlands   RGI COMPANY LTD
• Ihre E-Mail wurde in der Liste der Betrugsopfer gefunden   United Union
• [PATCH 1/2] mtd: hyperbus: rpc-if: Fix RPM imbalance in probe error path   Wolfram Sang
• [PATCH 2/2] spi: rpc-if: Fix RPM imbalance in probe error path   Wolfram Sang
• [PATCH] Create a proper header for the saved mtdoops.   Jean-Marc Eurin
• [PATCH v2 4/8] mtd: spi-nor: core: Introduce method for RDID op   Tudor.Ambarus at microchip.com
• [PATCH] Create a proper header for the saved mtdoops.   Miquel Raynal
• [PATCH] mtd: parsers: add support for Sercomm partitions   Miquel Raynal
• [PATCH v4 08/11] spi: aspeed: Calibrate read timings   Chin-Ting Kuo
• [PATCH v4 08/11] spi: aspeed: Calibrate read timings   Cédric Le Goater
• [PATCH] Fix the size of the header read buffer.   Jean-Marc Eurin
• [PATCH v2 0/2] mtd: mtdoops: Structure the header of the dumped oops.   Jean-Marc Eurin
• [PATCH v2 1/2] mtd: mtdoops: Fix the size of the header read buffer.   Jean-Marc Eurin
• [PATCH v2 2/2] mtd: mtdoops: Create a header structure for the saved mtdoops.   Jean-Marc Eurin
• [PATCH v2 4/8] mtd: spi-nor: core: Introduce method for RDID op   Pratyush Yadav
• [PATCH v2 3/8] mtd: spi-nor: core: Use auto-detection only once   Pratyush Yadav
• [PATCH v4 02/11] dt-bindings: spi: Add Aspeed SMC controllers device tree binding   Pratyush Yadav
• [PATCH v4 03/11] spi: spi-mem: Convert Aspeed SMC driver to spi-mem   Pratyush Yadav
• [PATCH v4 04/11] spi: aspeed: Add support for direct mapping   Pratyush Yadav
• [PATCH v4 11/11] mtd: spi-nor: aspeed: set the decoding size to at least 2MB for AST2600   Pratyush Yadav
• [PATCH] Fix the size of the header read buffer.   Jean-Marc Eurin
• [linux-next:master] BUILD REGRESSION a67ba3cf9551f8c92d5ec9d7eae1aadbb9127b57   kernel test robot
• [PATCH v2 2/2] mtd: mtdoops: Create a header structure for the saved mtdoops.   kernel test robot
• [PATCH v2 2/2] mtd: mtdoops: Create a header structure for the saved mtdoops.   kernel test robot
• [PATCH v4 08/11] spi: aspeed: Calibrate read timings   Chin-Ting Kuo
• [PATCH v4 08/11] spi: aspeed: Calibrate read timings   Cédric Le Goater
• [PATCH v4 02/11] dt-bindings: spi: Add Aspeed SMC controllers device tree binding   Cédric Le Goater
• [PATCH v4 08/11] spi: aspeed: Calibrate read timings   Chin-Ting Kuo
• [PATCH v4 02/11] dt-bindings: spi: Add Aspeed SMC controllers device tree binding   Pratyush Yadav
• [PATCH v4 08/11] spi: aspeed: Calibrate read timings   Pratyush Yadav
• [PATCH] mtd: spi-nor: core: Fix 16bit write sr_and_check status check   Pratyush Yadav
• [GIT PULL] JFFS2, UBI and UBIFS fixes for 5.18   Richard Weinberger
• [GIT PULL] JFFS2, UBI and UBIFS fixes for 5.18   pr-tracker-bot at kernel.org

Last message date: Thu Mar 31 16:22:56 PDT 2022
Archived on: Thu Mar 31 16:23:01 PDT 2022

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...